RECEIVER SET UP GUIDE 722/622

Size: px

Start display at page:

Download "RECEIVER SET UP GUIDE 722/622"

Millicent Howard
6 years ago
Views:

1 RECEIVER SET U GUIDE 722/622

2 SATELLITE IN SATELLITE IN SEARATOR SATELLITE IN SATELLITE IN INUT MHz UHF/VHF SATELLITE IN TRILEXER MHz SATELLITE IN MHz INUT MHz UHF/VHF TRILEXER MHz MHz DC & DiSEqC ASS 1. Labeling Your Cables Use the labels provided to complete this step. Do not remove any cables from the receiver being replaced until Step 2. a. Attach the blue label to the cables connected to the "Satellite In" port. Your Satellite In connection will look like one of the following images. DC & DiSEqC ASS LUS or LUS INUT b. Attach the gray label to the cables connected to the "Home Distribution" port. HOME DISTRIBUTION HOME DISTRIBUTION Your Home Distribution connection will look like one of the following images. DC & DiSEqC ASS LUS or

3 1. Labeling Your Cables (Cont d) c. For your audio/video connection, you will either use an HDMI cable, Ybr cables, or RCA cables. Attach either the black label to the cable connected to the HDMI port, the orange label to the cables connected to the RCA ports, or the red label to the cables connected to the Ybr ports. RCA RCA Ybr Ybr COMOSITE COMOSITE COMONENT COMONENT d. Attach the yellow label to the cable connected to the "Ethernet" port. You may not have this cable. e. Attach the white label to the cable connected to the "hone" port. You may not have this cable. HONE HONE

4 1. Labeling Your Cables (Cont d) f. Attach the green label to the cable or antenna connected to the "Remote Antenna" port. 2. Disconnecting Your Cables a. Disconnect the cables from the receiver being replaced. Only disconnect the cables at the end connected to the receiver. Do not disconnect the cables from the wall or TV. Wall Receiver

5 SATELLITE IN MHz SATELLITE IN TRILEXER MHz HOME HOME DISTRIBUTION DISTRIBUTION UHF/VHF INUT MHz DC & DiSEqC ASS SEARATOR SATELLITE IN SATELLITE IN HOME HOME DISTRIBUTION DISTRIBUTION RCA COMOSITE RCA COMOSITE Ybr COMONENT Ybr COMONENT 3. Connecting the Cables to Your Replacement Receiver a. Connect the Satellite In cables to the "Satellite In" ports and connect the Home Distribution cables to the "Home Distribution" port on the replacement receiver. Your Satellite In and Home Distribution connection will look like one of the following images. DC & DiSEqC ASS LUS or INUT LUS b. Connect either the HDMI cable, YbR cables, or RCA cables from the TV to the corresponding port(s) on the replacement receiver. c. Connect the Ethernet cable to the "Ethernet" port on the replacement receiver. You may not have this cable.

6 HONE HONE 3. Connecting the Cables to Your Replacement Receiver (Cont d) d. Connect the hone cable to the "hone" port on the replacement receiver. You may not have this cable. e. Connect the remote antenna to the "Remote Antenna" port on the replacement receiver. HONE HONE f. Open the panel on the front of the new receiver and make sure the Smart Card is secured firmly in the slot. Not all receivers will have a Smart Card. If your receiver does not have a Smart Card, go to Step 4. INSERT CARD FIRMLY THIS SIDE U Inserte firmemente con este lado hacia arriba

4. owering Your Equipment a. Make sure your TV cord is plugged into the wall outlet and turn on your TV. b. lug the power cord from the new receiver into a wall outlet. c. Your screen should now display the rogram TV1 Remote to Receiver screen.

7 4. owering Your Equipment a. Make sure your TV cord is plugged into the wall outlet and turn on your TV. b. lug the power cord from the new receiver into a wall outlet. c. Your screen should now display the rogram TV1 Remote to Receiver screen. If you do not see this screen, confirm that you are on the correct input for watching DISH. Check the input by pressing the Source/Input button located on the side, back, or front of your TV.

8 5. rogramming Your Remote Control a. Follow the on-screen instructions to program your remote(s) to the replacement receiver. b. Once you have completed the on screen steps, use the arrow buttons on your remote control to highlight "Save" and then press the SELECT button on your remote control. c. If you have a second remote for your TV2, follow the on-screen instructions to program your second remote to the replacement receiver. If you do not have a second remote, use the arrow buttons on your remote control to highlight "Continue" and then press the SELECT button on your remote control. d. Once you have completed the on screen steps for your second remote, use the arrow buttons on your remote control to highlight "Continue" and then press the SELECT button on your remote control.

9 6. Downloading the Receiver Software a. Your receiver will automatically start the software download. b. Once your software download is complete, your receiver will automatically start updating the receiver.

10 7. Setting Your TV Configuration a. Using your remote control, follow the on-screen instructions to set the proper channel for your TV2. Use the arrow buttons on your remote control to highlight "Save" and then press the SELECT button on your remote control. b. Using your remote control, follow the on-screen instructions to set the video resolution based on the TV type that you are using. Use the arrow buttons on your remote control to highlight "Save" and then press the SELECT button on your remote control. c. Using the arrows on your remote control, highlight "Continue" and then press the SELECT button on your remote control to test the Ethernet connection. Repeat this process to test the phone connection.

8. Activating Your Replacement Receiver a. Wait while the activation process begins. b. Have your account number, receiver number, and Smart Card number ready.

11 8. Activating Your Replacement Receiver a. Wait while the activation process begins. b. Have your account number, receiver number, and Smart Card number ready. Using the number buttons on your remote enter in your receiver number along with your account number and zip code. Then highlight "Continue" and press SELECT. c. Using the arrow buttons on your remote, highlight "Live TV" and press SELECT.

12 8. Activating Your Replacement Receiver (Cont d) d. Wait while your satellite signal is acquired. e. Wait while your program guide downloads. f. Once your program guide downloads, your screen will display live TV.

13 9. Returning Your Original Receiver Find your model number located on the back of your original receiver. Your model name may appear with letters in front or behind the number; such as Vi, Xi, or Zi. If your model number appears below, continue following Step 9 "Returning Your Original Receiver." If you do not see your model number, go to Step 10 "Recycling Your Original Receiver." Wally Hopper Joey a. Carefully wrap the power cord around the receiver and pack the receiver in between the foam protection. b. lace the receiver in the box that the new receiver came in.

14 (800) DISH NETWORK 525 DUNNETT COURT SARTANBURG SC BILLING: / CUE 9.5 SCL A 10/2009 (800) DISH NETWORK 525 DUNNETT COURT SARTANBURG SC BILLING: / BILLING: / DESC: RETURN RETURN SERVICE REF1: XXXXXXXX REF2: XXXXXX REQTYE: AE QTY: 1 1. Remove Shipping Label Here (111) MELO DR NORTH BANGOR NY TRACKING #: 1Z *** *** ** **** *** * CUE 9.5 SCL A 10/2009 BILLING: / DESC: RETURN RETURN SERVICE REF1: XXXXXXXX REF2: XXXXXX REQTYE: AE QTY: 1 ORD: XXXXXXXX DOC: XXXXXXX SN:RREJXXXXXXXXX N: XXXXXX RA: XXXXXXXX DEL: XXXXXXXX (800) DISH NETWORK 525 DUNNETT COURT SARTANBURG SC BILLING: / 1. Remove Shipping Label Here (111) MELO DR NORTH BANGOR NY TRACKING #: 1Z *** *** ** **** *** * ORD: XXXXXXXX DOC: XXXXXXX SN:RREJXXXXXXXXX N: XXXXXX RA: XXXXXXXX DEL: XXXXXXXX CUE 9.5 SCL A 10/ Returning Your Original Receiver (Cont'd) c. Locate the original shipping label on the box and remove it using the red tab. SHI TO: TO RETURN EQUIMENT TO DISH NETWORK US 2ND DAY AIR 1 LBS 1 OF 1 NY *44* 2 A1Z* RETURNS LIFT HERE 2. Turn Label Over 3. eel and Apply Return Label to Box SHI TO: TO RETURN EQUIMENT TO DISH NETWORK US 2ND DAY AIR 1 LBS EEL HERE AND NY *44* 2 A1Z* RETURNS LIFT HERE 2. Turn Label Over 3. eel and Apply Return Label to Box d. Turn the original label over and peel off the yellow return shipping label to expose the adhesive. SHI TO: 1 LBS (111) MELO DR NORTH BANGOR NY EEL HERE AND NY *44* US 2ND DAY AIR TRACKING #: 1Z *** *** ** **** *** * 2 A1Z* EEL HERE AND ALY RETURN SHIING LABEL 1 LBS 1 OF 1 BURG SERVICE CENTER OURT RG SC SC *44* AY AIR Z*** *** ** **** *** * A1Z*8463 RS 2 e. Apply the yellow return label to the top of the box and seal the box. f. Copy the RA and US tracking numbers for your records. (111) SERVICE SARTANBURG SERVICE CENTER 525 DUNNET COURT SARTANBURG SC SHI TO: RS 1 LBS 1 OF 1 (111) SERVICE SARTANBURG SERVICE CENTER NULL 525 DUNNET COURT SARTANBURG SC SC *44* US 2ND DAY AIR A1Z* TRACKING #: 1Z *** *** ** **** *** * 2 US tracking number RA number g. Return the removed receiver at the nearest US dropoff location. To find the location nearest you or to schedule a pickup at your cost, visit ups.com/dropoff.

15 Inserte firmemente con este lado hacia arriba 10. Recycling Your Original Receiver Only complete this step if you did not see your receiver number in Step 9. a. Open the front panel on the receiver. b. If your receiver has a Smart Card, remove it from the receiver and continue to Step 10c. If your receiver does not have a Smart Card, go to Step 10d. THIS SIDE DOWN TRADEMARK OF ECHOSTAR COMMUNICATIONS CORORATION R COYRIGHT 1996 ECHOSTAR COMMUNICATIONS CORORATION C INSERT CARD FIRMLY THIS SIDE U IMO RTANT *DO NOT BEND ACCESS CARD. *DO NOT REMOVE AND RE-INSERT CARD UNNECESSARILY. *NEVER USE CLEANING FLUIDS ON CARD OF SUBMERGE IN LIQUID nagra ID AA-07 c. Destroy the Smart Card by cutting the card lengthwise through the main chip. This card is the property of EchoStar Communications Corporation and must be returned upon request. Nagravision is a trademark of Kudeiski SA Switzerland NAGRA VISION Swiss Made NofunS S 00 XXXX XXXX XX d. Visit mydish.com/recycle or dish.com/redirects/promotion/recycle to dispose of your equipment in an environmentally responsible manner at an electronics recycler near you. Do not return your receiver, Smart Card, or other equipment to DISH.

16 Vist us at: Select Chat Now for assistance Call our 24/7 Toll Free customer service: DISH (3474) DN007669

RECEIVER SET UP GUIDE 311/512

RECEIVER SET UP GUIDE 311/512 1. Labeling Your Cables Do not remove any cables from the receiver being replaced until Page 3. Use the labels provided to complete Step 1. The back of your receiver may look