DVB is a registered trademark of the DVB Project PLASMA TV MODELS 50PY3DF* 60PY3DF* 42PB4D* 50PB4D* LCD TV MODELS 32LB9D* 42LB9DF* 47LB9DF* 52LB9DF*

Transcription

1 LCD TV MODELS LB9D* 4LB9DF* 47LB9DF* 5LB9DF* PLASMA TV MODELS 50PYDF* 60PYDF* 4PB4D* 50PB4D* DVB is a registered trademark of the DVB Project ID Number: 4757: LB9D 4756: 4LB9DF 4755: 47LB9DF 4754: 5LB9DF 4709: 50PYDF 4708: 60PYDF 486: 4PB4D 487: 50PB4D ONLY:4LB9DF 47LB9DF 5LB9DF 50PYDF 60PYDF

2

3 MODE D/A POWER TV VCR BRIGHT DVD RATIO TEXT INFO i GUIDE EXIT MENU OK Q.VIEW SUBTITLE VOL PR MUTE LIST 0 FAV SIZE INDEX TIME? REVEAL I/II USB SLEEP MARK PAGE ACCESSORIES Ensure that the following accessories are included with your product. If an accessory is missing, please contact the dealer where you purchased the product. ACCESSORIES.5V.5V Owner s Manual Batteries Remote Control Power Cord Polishing Cloth This feature is not available for all models. Carefully wipe stained spot on the exterior only with the polishing cloth for the product exterior if there is stain or fingerprint on the surface of the exterior. Do not wipe hard roughly when removing stain. Please be careful as excessive pressure may cause a scratch or discoloration. For LCD TV models This feature is not available for all models. LB9D* only Cable Management Twist Holder Arrange the wires with the twist holder. - TV Bracket Bolts - TV Brackets, - Wall Brackets -screw for stand fixing Refer to p. 0 4-bolts for stand assembly Refer to p. 9 50/60PYDF* only 60PYDF* only 50PYDF* only Additional Cover Refer to p. 6 - Bolts Refer to p. 6 - Rubber Refer to p. 6 - TV Bracket Bolts - TV Brackets, - Wall Brackets -eye-bolts - Wall Brackets This feature is not available for all models. 4/50PB4D* only This feature is not available for all models. -eye-bolts - Wall Brackets

4 CONTENTS CONTENTS ACCESSORIES PREPARATION Front Panel Controls Back Panel Information Stand Installation Attaching the TV to a Desk Swivel Stand Attaching the TV to a Wall Back Cover for Wire Arrangement Desktop Pedestal Installation Wall Mount: Horizontal Installation Not Using The Desk-type Stand Antenna Connection Assigning a Station Name Programme Edit Input List Calling Up the Channel List Input Source Selection Key Lock Entry Modes Photo List Music List EPG(ELECTRONIC PROGRAMME GUIDE) EXTERNAL EQUIPMENT SETUP HD Receiver Setup DVD Setup VCR Setup Other A/V Source Setup PC Setup Screen Setup for PC Mode USB In Setup AV Output Setup Digital Audio Output Setup WATCHING TV / PROGRAMME CONTROL Remote Control Key Functions Turning on the TV Initializing Setup Programme Selection Volume Adjustment On-Screen Menus Selection and Adjustment.. 8 Factory Reset Model Info Auto Programme Tuning Manual Programme Tuning Fine Tuning Switch on/off EPG Select a programme Button Function in NOW/NEXT Guide Mode. 6 Button Function in 7 Days Guide Mode Button Function in Extended Description Box. 64 Button Function in Reservation Setting Mode. 64 PICTURE CONTROL Picture Size (Aspect Ratio) Control Preset Picture Settings - Picture Mode - Preset Auto Colour Tone Control (Warm/Medium/Cool) Manual Picture Adjustment - Picture Mode - User Option Colour Tone - User Option Brightness Adjustment XD - Picture Improvement Technology Advanced - Cinema Advanced - Black( Darkness) Level Picture Reset Image Sticking Minimization(ISM) Method Low Power Front Display(50/60PYDF* only)

5 SOUND & LANGUAGE CONTROL Auto Volume Leveler ( Auto Volume) Preset Sound Settings- Sound Mode Sound Setting Adjustment - User Mode Balance TV Speakers On/ Off Setup I/II - Stereo/Dual Reception Speaker Sound Output Selection Subtitle APPENDIX Troubleshooting Maintenance Product Specifications Programming the Remote Control IR Codes External Control through RS-C Open Source License CONTENTS TIME SETTING Clock Setting Auto On/ Off Timer Setting Sleep Timer Setting Auto Shut-off Setting PARENTAL CONTROL / RATINGS Set Password & Lock System Programme Blocking Parental Guidance External Input Blocking TELETEXT Switch On/Off Simple Text TOP Text Fastext Special Teletext Functions After reading this manual, keep it handy for future reference.

6 PREPARATION FRONT PANEL CONTROLS PREPARATION This is a simplified representation of the front panel. Image shown may be somewhat different from your TV. If your product has a protection film attached, remove the film and then wipe the product with a polishing cloth. 50/60PYDF* Remote Control Sensor Program Display Touch Pad OK PR Power Standby Indicator illuminates red in standby mode. illuminates white when the set is switched on. Button POWER Button OK Button MENU Button VOLUME (F,G) Buttons PRO- GRAMME (E,D) Buttons 4

7 4/50PB4D* PREPARATION Remote Control Sensor Power/Standby Indicator illuminates red in standby mode. illuminates green when the set is switched on. MENU OK VOL PR POWER Button Button MENU Button OK Button VOLUME Buttons PROGRAMME Buttons 4/47/5LB9DF*, LB9D* Intelligent Eye Adjusts picture according to the surrounding conditions. Remote Control Sensor PR VOL OK MENU /I PROGRAMME (E,D) Buttons VOLUME (F,G) Buttons OK Button MENU Button Button POWER Button Power/Standby Indicator illuminates red in standby mode. illuminates green when the set is switched on. 5

8 PREPARATION BACK PANEL INFORMATION PREPARATION Image shown may be somewhat different from your TV. Plasma TV Models 50/60PYDF* AV IN 0 USB L/MONO AUDIO R VIDEO S-VIDEO USB port S-VIDEO Input Connect S-Video out from an S-VIDEO device. AUDIO/VIDEO Input Connect audio/video output from an external device to these jacks. 4/50PB4D* AV IN 0 USB L/MONO AUDIO R VIDEO S-VIDEO USB port S-VIDEO Input Connect S-Video out from an S-VIDEO device. AUDIO/VIDEO Input Connect audio/video output from an external device to these jacks. 6

9 AV IN IN AV OUT OUT HDMI/DVI IN RGB IN RGB (PC) AUDIO (RGB/DVI) REMOTE CONTROL IN DIGITAL AUDIO OUT OPTICAL VIDEO ANTENNA IN PREPARATION COMPONENT IN RS-C IN (CONTROL & SERVICE) AUDIO VIDEO AUDIO S-VIDEO VIDEO ( MONO) AUDIO HDMI/DVI IN Connect a HDMI signal. Or DVI(VIDEO) signal to the this port with a HDMI to DVI cable. RGB/AUDIO IN Connect the output from a set top box or PC to the appropriate input port. RS-C IN (CONTROL &SERVICE) PORT Connect to the RS-C port on a PC. Remote Control Port Connect your wired remote control. ANTENNA IN Connect antenna signals to this jack COMPONENT IN Connect a component video/audio device to these jacks. AV (Audio/Video) IN Connect audio/video output from an external device to these jacks. S-VIDEO Connect S-Video out from an S-VIDEO device. AV OUT Connect a second TV or monitor. Power Cord Socket For operation with AC power. Caution: Never attempt to operate the TV on DC power. 6 DIGITAL AUDIO OUT Connect digital audio from various types of equipment. Note: In standby mode, these ports do not work. 7

10 AV IN IN AV OUT OUT PREPARATION Image shown may be somewhat different from your TV. LCD TV Models 4/47/5LB9DF* PREPARATION 0 LB9D* VIDEO L/MONO AUDIO R USB IN AV IN USB IN L/MONO AUDIO R VIDEO S-VIDEO AV IN USB Input S-VIDEO Input Connect S-Video out from an S-VIDEO device. AUDIO/VIDEO Input Connect audio/video output from an external device to these jacks HDMI/DVI IN RGB IN RGB (PC) AUDIO (RGB/DVI) REMOTE CONTROL IN ANTENNA IN DIGITAL AUDIO OUT OPTICAL VIDEO COMPONENT IN RS-C IN (CONTROL & SERVICE) AUDIO VIDEO AUDIO S-VIDEO VIDEO ( MONO) AUDIO HDMI/DVI IN Connect a HDMI signal. Or DVI(VIDEO) signal to the this port with a HDMI to DVI cable. RGB/AUDIO IN Connect the output from a set top box or PC to the appropriate input port. RS-C IN (CONTROL &SERVICE) PORT Connect to the RS-C port on a PC. Remote Control Port Connect your wired remote control. ANTENNA IN Connect antenna signals to this jack. DIGITAL AUDIO OUT Connect digital audio from various types of equipment. Note: In standby mode, these ports do not work COMPONENT IN Connect a component video/audio device to these jacks. AV (Audio/Video) IN Connect audio/video output from an external device to these jacks. S-VIDEO Connect S-Video out from an S-VIDEO device. AV OUT Connect a second TV or monitor. Power Cord Socket For operation with AC power. Caution: Never attempt to operate the TV on DC power. 9 8

11 STAND INSTALLATION (LB9D* Only) Carefully place the product screen side down on a cushioned surface that will protect product and screen from damage. PREPARATION Assemble the product stand with the product as shown. Install the 4 bolts securely, in the back of the product in the holes provided. 9

12 PREPARATION ATTACHING THE TV TO A DESK (LB9D * Only) PREPARATION If you wish to attach the TV to a desk, it must be securely fastened to the desk using a metal screw (as shown below). Failure to securely attach the TV may result in the TV falling: which may cause damage to the TV and serious personal injury. Stand -screw Desk SWIVEL STAND After installing the TV, you can adjust the the TV set manually to the left or right direction by 0 degrees to suit your viewing position. 50/60PYDF* models NOTE G Before adjusting the angle, you must remove the cable management and loosen (to the left) the shaft bolt on the middle of stand s back. And when stand be level with TV, you must close (to the right) the shaft bolt to set the hole. 0

13 ATTACHING THE TV TO A WALL A This Feature is not available for all models. A Set it up close to the wall so the product doesn t fall over when it is pushed backwards. A The instructions shown below is a safer way to set up the product, which is to fix it on the wall so the product doesn t fall over when it is pulled in the forward direction. It will prevent the product from falling forward and hurting people. It will also prevent the product from damage caused by fall. Please make sure that children don t climb on or hang from the product. 60PYDF* 50PYDF* 4/50PB4D* 4/47/5LB9DF*, LB9D* PREPARATION Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture. (If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts.) * Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes. Secure the wall brackets with the bolts (not provided as parts of the product, must purchase separately) on the wall. Match the height of the bracket that is mounted on the wall. Use a sturdy rope (not provided as parts of the product, must purchase separately) to tie the product. It is safer to tie the rope so it becomes horizontal between the wall and the product.! NOTE G When moving the product to another place undo the ropes first. G Use a product holder or a cabinet that is big and strong enough for the size and weight of the product. G To use the product safely make sure that the height of the bracket that is mounted on the wall is same as that of the product.

14 PREPARATION BACK COVER FOR WIRE ARRANGEMENT Here shown may be somewhat different from your TV. PREPARATION 50/60PYDF* Hold the CABLE MANAGEMENT with both hands and pull it as shown. 45 CABLE MANAGEMENT Connect the cables as necessary. To connect additional equipment, see the External equipment Setup section. Install the CABLE MANAGEMENT as shown.

15 4/50PB4D* Hold the CABLE MANAGEMENT with hands and push it as shown. PREPARATION CABLE MANAGEMENT Connect the cables as necessary. To connect an additional equipment, see the External equipment Setup section. Reinstall the CABLE MANAGEMENT as shown.

16 PREPARATION PREPARATION Connect the cables as necessary. To connect additional equipment, see the External Equipment Setup section. 4/47/5LB9DF*, LB9D* Install the CABLE MANAGEMENT as shown. (Insert it as pushing the loops on the both sides of the cable management.) (This Feature is not available for all models.) CABLE MANAGEMENT Bundle the cables using the supplied twist holder. (This Feature is not available for all models.) How to remove the cable management TWIST HOLDER Hold the CABLE MANAGEMENT with both hands and pull it upward. (Pull it out as holding the loops on the both sides of the cable management.)! NOTE G Do not hold the CABLE MANAGEMENT when moving the product. - If the product is dropped, you may be injured or the product may be broken. 4

17 GROUNDING Ensure that you connect the earth ground wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes. DESKTOP PEDESTAL INSTALLATION For proper ventilation, allow a clearance of 4inches on all four sides from the wall. Power Supply Short-circuit Breaker PREPARATION 4 inches 4 inches 4 inches 4 inches CAUTION G Ensure adequate ventilation by following the clearance recommendations. WALL MOUNT: HORIZONTAL INSTALLATION For proper ventilation, allow a clearance of 4" on each side and from the wall. Detailed installation instructions are available from your dealer. 4 inches 4 inches 4 inches 4 inches 4 inches 5

18 PREPARATION NOT USING THE DESK-TYPE STAND(Only 50/60PYDF* model) PREPARATION It is applied to when installing only the 60PYDF* model as wall-type. When not using the desk-type stand, install the supplied desk-type stand fixture protection rubber caps as shown at the figure. RUBBER It is applied to when installing only the 50/60PYDF* model as wall-type. BOLT To prevent the foreign materials from entering the desk-type stand fixture, fix the desk-type stand fixture protection cover(additional cover) by using the supplied bolts as shown at the figure. ADDITIONAL COVER 6

19 To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. ANTENNA CONNECTION Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections. For optimum picture quality, adjust antenna direction if needed. PREPARATION Wall Antenna Socket Multi-family Dwellings/Apartments (Connect to wall antenna socket) ANTENNA IN Outdoor Antenna (VHF, UHF ) RF Coaxial Wire (75 ohm) Single-family Dwellings /Houses (Connect to wall jack for outdoor antenna) Antenna UHF VHF Signal Amplifier ANTENNA IN To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly. If the antenna needs to be split for two TV s, install a -Way Signal Splitter. If the antenna is not installed properly, contact your dealer for assistance.! NOTE G The TV will let you know when the analogue, cable, and digital programme scans are complete. 7

20 EXTERNAL EQUIPMENT SETUP To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. This part of EXTERNAL EQUIPMENT SETUP mainly use pictures for the LCD TV models. HD RECEIVER SETUP When connecting with a Component cables EXTERNAL EQUIPMENT SETUP Connect the video outputs (Y, PB, PR) of the digital set top box to the COMPONENT IN VIDEO jacks on the set. Match the jack colours. (Y = green, PB = blue, and PR = red) Connect the audio output of the digital set-top box to the COMPONENT IN AUDIO jacks on the set. Turn on the digital set-top box. (Refer to the owner s manual for the digital set-top box.) COMPONENT IN VIDEO AUDIO 4 Select Component input source using the button on the remote control. If connected to COMPONENT IN input, select Component input source. Signal Component / HDMI/DVI,, 480i Yes No Y PB PR L R 480p Yes Yes 576i Yes No 576p Yes Yes 70p Yes Yes 080i Yes Yes 080p Yes Yes 8

21 When connecting with HDMI cable 4 Connect the digital set-top box to HDMI/ DVI IN, or jack on the set. No separate audio connection is necessary. Turn on the digital set-top box. (Refer to the owner s manual for the digital set-top box.) Select HDMI, HDMI or HDMI input source using the button on the remote control. HDMI/DVI IN RGB IN RGB (PC) COMPONENT IN VIDEO AUDIO (RGB/DVI) AUD EXTERNAL EQUIPMENT SETUP! NOTE G If the digital set-top box supports Auto HDMI function, the output resolution of the source device will be automatically set to 80x70p. G If the digital set-top box player does not support Auto HDMI, you need to set the output resolution appropriately. To get the best picture quality, adjust the output resolution of the source device to 90x080i/080p. (LB9D*, 4/50PB4D*: 80x70p) HDMI-DTV OUTPUT 9

22 AV IN AV OUT EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT SETUP When connecting HDMI to DVI cable HDMI/DVI IN RGB IN RGB (PC) COMPONENT IN VIDEO AUDIO (RGB/DVI) AUDIO REMOTE CONTROL IN RS-C IN (CONTROL & SERVICE) S-VIDEO VIDEO ANTENNA IN DIGITAL AUDIO OUT OPTICAL AUDIO VIDEO ( MONO) AUDIO DVI-DTV OUTPUT L R 4 Connect the DVI output of the digital set-top box to the HDMI/DVI IN, or jack on the set. Connect the audio output of the digital set-top box to the AUDIO(RGB/DVI) jack on the set. Turn on the digital set-top box. (Refer to the owner s manual for the digital set-top box.) Select HDMI, HDMI or HDMI input source with using the button on the remote control. 0

23 DVD SETUP When connecting Component cables Connect the video outputs (Y, PB, PR) of the DVD to the COMPONENT IN VIDEO jacks on the set. Match the jack colours (Y = green, PB = blue, and PR = red). Connect the audio outputs of the DVD to the COMPO- NENT IN AUDIO jacks on the set. COMPONENT IN VIDEO AUDIO (C S EXTERNAL EQUIPMENT SETUP Turn on the DVD player, insert a DVD. 4 Select Component input source using the button on the remote control. If connected to COMPONENT IN input, select Component input source. 5 Refer to the DVD player's manual for operating instructions. Y PB PR L R Component Input ports To get better picture quality, connect a DVD player to the component input ports as shown below. Component ports on the TV Y PB PR Y PB PR Video output ports on DVD player Y Y B-Y Cb R-Y Cr Y Pb Pr

24 AV IN EXTERNAL EQUIPMENT SETUP When connecting with an S-Video cable U O Connect the S-VIDEO output of the DVD to the S-VIDEO input on the set. S-VIDEO VIDEO ( MONO) AUDIO EXTERNAL EQUIPMENT SETUP 4 5 Connect the audio outputs of the DVD to the AUDIO input jacks on the set. Turn on the DVD player, insert a DVD. Select AV input source using the button on the remote control. If connected to AV IN input, select AV input source.(except LB9D*) Refer to the DVD player's manual for operating instructions. When connecting HDMI cable S-VIDEO L R AUDIO Connect the HDMI output of the DVD to the HDMI/DVI IN, or jack on the set. HDMI/DVI IN RGB IN RGB (PC) A (R No separate audio connection is necessary. COMPONEN Select HDMI, HDMI or HDMI input source using the button on the remote control. VIDEO 4 Refer to the DVD player's manual for operating instructions.! NOTE G If the DVD supports Auto HDMI function, the DVD output resolution will be automatically set to 80x70p. G If the DVD does not support Auto HDMI, you need to set the output resolution appropriately. To get the best picture quality, adjust the output resolution of the DVD to 90x080i/080p. (LB9D*, 4/50PB4D*: 80x70p) HDMI-DVD OUTPUT

25 AV IN AV OUT VCR SETUP To avoid picture noise (interference), leave an adequate distance between the VCR and TV. If the 4: picture format is used; the fixed images on the sides of the screen may remain visible on the screen. This phenomenon is common to all manufacturers and in consequence the manufacturer s warranty does not cover the product bearing this phenomenon. When connecting with an antenna RGB IN RGB (PC) COMPONENT IN VIDEO AUDIO (RGB/DVI) AUDIO REMOTE CONTROL IN RS-C IN (CONTROL & SERVICE) S-VIDEO VIDEO ANTENNA IN DIGITAL AUDIO OUT OPTICAL AUDIO VIDEO ( MONO) AUDIO ANT OUT ANT IN S-VIDEO OUTPUT SWITCH VIDEO Wall Jack L R EXTERNAL EQUIPMENT SETUP Antenna 4 Connect the RF antenna out socket of the VCR to the ANTENNA IN socket on the set. Connect the antenna cable to the RF antenna in socket of the VCR. Set VCR output switch to or 4 and then tune TV to the same programme number. Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner s manual.)

26 AV IN IN AV IN EXTERNAL EQUIPMENT SETUP When connecting with an RCA cable AUDIO S-VIDEO VIDEO ( MONO) AUDIO Connect the AUDIO/VIDEO jacks between TV and VCR. Match the jack colours(video = yellow, Audio Left = white, and Audio Right = red) EXTERNAL EQUIPMENT SETUP! NOTE Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner s manual.) Select AV input source using the button on the remote control. If connected to AV IN, select AV input source. G If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L(MONO) jack of the set. VIDEO L R S-VIDEO OUTPUT SWITCH ANT IN ANT OUT When connecting with an S-Video cable AUDIO O S-VIDEO VIDEO ( MONO) AUDIO Connect the S-VIDEO output of the VCR to the S-VIDEO input on the set. Connect the audio outputs of the VCR to the AUDIO input jacks on the set. Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner s manual.) 4 Select AV input source using the button on the remote control. If connected to AV IN input, select AV input source.(except LB9D*) S-VIDEO VIDEO L R ANT IN OUTPUT SWITCH ANT OUT! NOTE G The picture quality is improved: ; compared to normal composite (RCA cable) input. CAUTION G Do not connect to both Video and S-Video at the same time. In the event that you connect both Video and the S-Video cables, only the S-Video will work. 4

27 OTHER A/V SOURCE SETUP inches 4/47/50/5/60 inches VIDEO L/MONO AUDIO R USB IN AV IN Camcorder USB IN L/MONO AUDIO R VIDEO S-VIDEO AV IN Camcorder EXTERNAL EQUIPMENT SETUP VIDEO L R VIDEO L R Video Game Set Video Game Set Connect the AUDIO/VIDEO jacks between TV and external equipment. Match the jack colours.(video = yellow, Audio Left = white, and Audio Right = red) Select AV input source using the button on the remote control. If connected to AV IN input, select AV input source. Operate the corresponding external equipment. 5

28 EXTERNAL EQUIPMENT SETUP PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. The TV perceives 04x768, 60Hz as DTV 70p based on the PC graphic card. If necessary, change the screen scanning rate for the graphic card accordingly. EXTERNAL EQUIPMENT SETUP When connecting D-sub 5pin cable Connect the RGB output of the PC to the RGB (PC) jack on the set. Connect the PC audio output to the AUDIO (RGB/DVI) jack on the set. Turn on the PC and the set. RGB IN RGB (PC) COMPONENT IN VIDEO AUDIO (RGB/DVI) AUDIO REMOTE CONTROL IN RS-C IN (CONTROL & SERVICE) S-VIDEO VIDEO ANTEN IN DIGITA AUDIO O OPTICA ( MON 4 5 Select RGB-PC input source in input option of Special menu. Once you select RGB-PC in input option of Special menu, button is also available for this purpose.! NOTE G Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or brightness in PC mode. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the VIDEO menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card. RGB OUTPUT AUDIO 6

29 AV IN AV OUT When connecting HDMI to DVI cable HDMI/DVI IN RGB IN RGB (PC) COMPONENT IN VIDEO AUDIO (RGB/DVI) AUDIO REMOTE CONTROL IN RS-C IN (CONTROL & SERVICE) S-VIDEO VIDEO ANTENNA IN DIGITAL AUDIO OUT OPTICAL AUDIO VIDEO ( MONO) AUDIO EXTERNAL EQUIPMENT SETUP DVI-PC OUTPUT L R 4 Connect the DVI output of the PC to the HDMI/DVI IN, or jack on the set. (Use the HDMI to DVI cable) Connect the PC audio output to the AUDIO (RGB/DVI) jack on the set. Turn on the PC and the set. Select HDMI, HDMI or HDMI input source using the button on the remote control.! NOTE G If the PC has a DVI output and no HDMI output, a separate audio connection is necessary. G If the PC does not support Auto DVI, you need to set the output resolution appropriately. To get the best picture quality, adjust the PC graphics card's output resolution to 90x080, 60Hz. (4PB4D* : 04x768p, LB9D*/50PB4D*: 60x768p) 7

30 EXTERNAL EQUIPMENT SETUP Supported Display Specifications (RGB/HDMI-PC) Supported Display Specifications (HDMI-DTV) EXTERNAL EQUIPMENT SETUP Resolution 640x480 70x x600 04x768 80x768 60x768 66x768 80x04 600x00 90x080! NOTES Horizontal Frequency(kHz) Vertical Frequency(Hz) Except LB9D*, 4PB4D* Except 50PB4D* G Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use. G Avoid keeping a fixed image on the screen for a long period of time. The fixed image may become permanently imprinted on the screen. G The synchronization input form for Horizontal and Vertical frequencies is separate. Resolution 70x576p 70x480p 80x70p 90x080i 90x080p Supported Display Specifications (Component) Resolution 70x576i 70x576p 70x480i 70x480p 80x70p 90x080i 90x080p Horizontal Frequency(kHz) Horizontal Frequency(kHz) Vertical Frequency(Hz) Vertical Frequency(Hz)

31 Screen Setup for PC mode Overview When the RGB input, of the set is connected to a PC Output, Select RGB-PC with using the button on the remote control. When you change the resolution, select the proper resolution in present input to see the best picture appearance. Press the MENU button and then use D or E button to select the PICTURE menu. Press the G button and then use D or E button to select Screen. Picture Mode : User Colour Temperature : Cool XD Advanced Aspect Ratio : 6:9 Picture Reset Screen EXTERNAL EQUIPMENT SETUP Press the G button to enter the screen adjustment menu. Picture Mode Colour Temperature XD Advanced Aspect Ratio Picture Reset Screen G Selection ( G or ) leads you to the screen adjustment menu. 9

32 EXTERNAL EQUIPMENT SETUP Adjustment for screen Resolution, Position, Clock, Phase, Reset EXTERNAL EQUIPMENT SETUP Use D or E button to select Resolution, Position, Clock, or Phase. Press the OK button and then use D or E or F or G button to make appropriate adjustments. The Phase adjustment range is -6 ~ +6. The Clock adjustment range is -0 ~ +0. Press the OK button. Initializing (Reset to original factory values) To initialize the adjusted values. This function allows you to return to the good picture reproduction programmed at the factory and cannot be change. Move Resolution Position G Clock Phase Reset Prev Resolution XGA(04, 80, 60, 66(except 50PB4D*)) isn t distinguished because of having the same H/V Sync Time. This function is you to select the Default Sync Time. Position This function is to adjust picture to left/right and up/down as you prefer. Clock Phase This function is to minimize any vertical bars or stripes visible on the screen background. And the horizontal screen size will also change. This function allows you to remove any horizontal noise and clear or sharpen the image of characters. Use D or E button to select Reset. Resolution Position Clock Press the OK button and then use F or G button to select Yes. Phase Reset G Initialize Settings. Yes No Prev Select OK Press the OK button. 0

33 USB IN SETUP inches 4/47/50/5/60 inches VIDEO L/MONO AUDIO R USB IN AV IN USB IN L/MONO AUDIO R VIDEO S-VIDEO EXTERNAL EQUIPMENT SETUP AV IN Connect the USB device to the USB IN jacks on the side of TV. After connecting the USB IN jacks, you use the function. ( G p.54)

34 AV IN AV OUT OUT EXTERNAL EQUIPMENT SETUP AV OUTPUT SETUP The TV has a special signal output capability which allows you to hook up a second TV or monitor. EXTERNAL EQUIPMENT SETUP Connect the second TV or monitor to the TV s AV OUT jacks. See the Operating Manual of the second TV or monitor for further details regarding that device s input settings. REMOTE ONTROL IN RS-C IN TROL & SERVICE) IDEO VIDEO AUDIO OUT OPTICAL ( MONO) AUDIO AUDIO VIDEO! NOTE G Only Digital, Analogue mode can be used for AV out. G We recommend to use the AV OUT jacks for VCR recording. VIDEO L R S-VIDEO

35 AV IN AV OUT DIGITAL AUDIO OUTPUT SETUP Send the TV s audio to external audio equipment via the Digital Audio Output (Optical) port. Connect one end of an optical cable to the TV Digital Audio (Optical) Output port. Connect the other end of the optical cable to the digital audio (optical) input on the audio equipment. Set the TV Speaker option - Off in the AUDIO menu. See the external audio equipment instruction manual for operation. DIO REMOTE CONTROL IN RS-C IN (CONTROL & SERVICE) S-VIDEO VIDEO DIGITAL AUDIO OUT OPTICAL ( MONO) AUDIO AUDIO VIDEO EXTERNAL EQUIPMENT SETUP! NOTE G When connecting with external audio equipments, such as amplifiers or speakers, please turn the TV speakers off. CAUTION G Do not look into the optical output port. Looking at the laser beam may damage your vision.

36 WATCHING TV /PROGRAMME CONTROL REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. WATCHING TV/PROGRAMME CONTROL D/A (Digital TV / Analogue TV) POWER BRIGHT VCR/DVD control buttons mode control buttons OK Selects digital or analogue mode. External input modes rotate in regular sequence: Digital, Analogue, AV-, Component -, RGB-PC, HDMI, HDMI, HDMI. Switches the set between ON and STANDBY. See a list of AV devices connected to TV. When you toggle this button, the Simplink menu appears at the screen G p.5-5 Adjusts brightness on screen. It returns to the default settings brightness by changing mode source. Control some video cassette recorders or DVD players ("RECORD" button is not available for DVD player). Control the mode. Accepts your selection or displays the current mode. D/A EXIT POWER BRIGHT OK MODE TV VCR DVD RATIO TEXT INFO i GUIDE MENU SUBTITLE MARK THUMBSTICK (Up/Down/Left Right) Adjusts menu settings. Selects menu item. VOL Q.VIEW PR PAGE VOLUME UP/DOWN Q.VIEW Increase/decrease the sound level. Returns to the previously viewed programme. MUTE Switches the sound on or off. PROGRAMME Select a programme. UP/DOWN PAGE UP/DOWN Move from one full set of screen information to the next one. MUTE LIST 0 FAV NUMBER button LIST FAV(FAVORITE) I/II USBD SLEEP Selects a programme. Selects numbered items in a menu. Displays the programme table. Displays the selected favorite programmes. Selects the sound output or the audio mode. Remove the USB device. Sets the sleep timer. SIZE INDEX TIME? REVEAL I/II USB SLEEP 4

37 D/A TV DVD RATIO TEXT INFO i GUIDE EXIT MENU POWER BRIGHT MODE VCR SUBTITLE MARK D/A EXIT POWER BRIGHT MODE TV VCR DVD RATIO TEXT INFO i GUIDE MENU SUBTITLE MARK D/A OK TV DVD RATIO TEXT INFO i GUIDE EXIT MENU POWER BRIGHT MODE VCR SUBTITLE MARK TV, VCR, DVD RATIO Select the remote operating mode: TV, VCR, DVD. Select other operating modes, for the remote to operate external devices. Selects your desired picture format. INFOoo i GUIDE Coloured Button EXIT MENU SUBTITLE MARK Shows the present screen information. Shows a programme schedule. They are used as per the indications or functions displayed on the TV screen in the case of Text displays (Teletext, EPG) and programme edit. Returns to TV viewing from any menu. Selects a menu. Enter to the mode. Recalls your preferred subtitle in digital mode. Selects the wanted functions. WATCHING TV/PROGRAMME CONTROL TELETEXT BUTTONS These buttons are used for teletext. Text button is used to enable teletext services while other buttons are for teletext functions. * For further details, see the Teletext section. Installing Batteries Remote control effective range 50/60PYDF* 4/50PB4D* 4/47/5LB9DF*, LB9D* Open the battery compartment cover on the back side and install the batteries matching correct polarity (+with +,-with -). Install two.5v AA batteries. Don t mix old or used batteries with new ones. Close cover. Use a remote control up to 7 meters distance and 0 degree (left/right) within the receiving unit scope. Dispose of used batteries in a recycle bin to preserve environment. 5

38 WATCHING TV/PROGRAMME CONTROL TURNING ON THE TV D/A POWER MODE TV If your TV will be turned on, you will be able to use its features. BRIGHT VCR DVD RATIO TEXT INFO i GUIDE WATCHING TV/PROGRAMME CONTROL! G G Ensure the power cord is connected correctly. When connected to power the TV switches to standby mode. In standby mode, press the, (except 50/60PYDF*), PR D or E button(except 50/60PYDF*) on the TV or press the POWER,, D/A, PR + or -, Number (0~9) button on the remote control. Select the viewing source by using the button on the remote control. This TV is programmed to remember which mode it was last set to, even if you turn the TV off. When finished using the TV, press the POWER button on the remote control. The TV reverts to standby mode. NOTE If you intend to be away on vacation, disconnect the power plug from the wall power outlet. When the TV is turned on, the indicator will blink green(50/60pydf*: white) before the picture is seen. MENU EXIT OK Q.VIEW VOL MUTE SUBTITLE MARK PR PAGE LIST 0 FAV INITIALIZING SETUP Installation Guide Welcome! If the OSD (On Screen Display) is displayed on the screen as figure after turning on the set, you can adjust the Auto Programme tuning, Time Zone selection or Password setting. NOTE G It will automatically disappear after approx, 40 seconds unless a button is pressed. Thank you for choosing LG. The Following process guides you to complete initial settings. Before starting, be sure that the TV antenna is connected. Press OK( ) to continue. Figure. Next 6

39 PROGRAMME SELECTION Q.VIEW VOL PR PAGE Automatically finds all programmes available through antenna inputs, and stores them in memory on the programme list. MUTE LIST 0 FAV Press the PR + or - or NUMBER buttons to select a programme number. VOLUME ADJUSTMENT Adjust the volume to suit your personal preference. SIZE INDEX TIME? REVEAL I/II SLEEP D/A POWER BRIGHT RATIO TEXT INFO i USB MODE TV VCR DVD GUIDE WATCHING TV/PROGRAMME CONTROL Press the VOL + or - button to adjust the volume. MENU SUBTITLE EXIT MARK If you want to switch the sound off, press the MUTE button. OK You can cancel the Mute function by pressing the MUTE, I/II or VOL + or - button. VOL Q.VIEW MUTE PR PAGE LIST 0 FAV SIZE INDEX TIME? REVEAL I/II USB SLEEP 7

40 WATCHING TV/PROGRAMME CONTROL ON-SCREEN MENUS SELECTION AND ADJUSTMENT Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. Press the MENU button and then use D or E button to select each menu. WATCHING TV/PROGRAMME CONTROL Press the G button and then use D or E or F or G button to display the available menus. SETUP PICTURE Auto Tuning Manual Tuning Programme Edit Picture Mode Colour Temperature XD : Dynamic Advanced Aspect Ratio : Auto Picture Reset Screen LOCK AUDIO Lock System Set Password Block Programme Parental Guidance Input Block : Off Sound Mode : Standard Auto Volume : On Balance : 0 TV Speaker : On OPTION TIME Subtitle : Off Input Label : Off Key Lock : Off Set ID : ISM Method Low Power Front Display Factory Reset Model Info *Plasma TV models only *50/60PYDF* only Clock : : Off Time : Off On Time : Off Sleep Time : Off Auto Sleep : Off 8

41 FACTORY RESET EXIT MENU SUBTITLE MARK Use to quickly reset all the menu options to their original factory preset values. This function deletes all TV programmes. To begin Factory Reset, input a 4-digit password in Lock system. Be sure to remember this number! If you forgot your password, press 7, 7, 7, 7 on the remote control handset. 4 Press the MENU button and then use D or E button to select the OPTION menu. Press the G button and then use D or E button to select Factory Reset. Press the G button and then use D or E button to select On or Off. Press EXIT button to return to normal TV viewing or press MENU button to return to the previous menu. Subtitle : Off Input Label : Off Key Lock : Off Set ID : ISM Method Low Power Front Display Factory Reset Model Info Subtitle Input label Key Lock Set ID ISM Method Low Power Front Display Factory Reset Model Info G OK Selection(ON) resets all users settings. WARNING: All channel service and user settings will be lost and return to initial setting. Off On WATCHING TV/PROGRAMME CONTROL MENU SUBTITLE MODEL INFO EXIT OK MARK This function enables you to watch Model, Software Version. Subtitle : Off Input Label : Off Press the MENU button and then use D or E button to select the OPTION menu. Key Lock : Off Set ID : ISM Method Low Power Press the G button and then use D or E button to select Model Info. Front Display Factory Reset Model Info Press the G button to display Model, Software Version. Subtitle Input label 4 Press EXIT button to return to normal TV viewing or press MENU button to return to the previous menu. Key Lock Set ID ISM Method Low Power Front Display Factory Reset MODEL : 4LB9DF-AD S/W Ver. : Model Info G 9

42 WATCHING TV/PROGRAMME CONTROL AUTO PROGRAMME TUNING WATCHING TV/PROGRAMME CONTROL A password is required to gain access to Auto programme or Manual programme menu if the Lock system is turned on. If you forgot your password, press 7, 7, 7, 7 on the remote control. In Australia, if no station name can be assigned to a station, the programme number is assigned and stored as followed by a number see Assigning a station name section to assign the station name. Press the MENU button and then D or E button to select the SETUP menu. Press the G button and then D or E button to select Auto Tuning. Auto Tuning Manual Tuning Programme Edit MENU EXIT OK Q.VIEW VOL MUTE SUBTITLE MARK PR PAGE Press the G button to select To Start and then press the F or G button to select N o. Auto Tuning Manual Tuning To Start G Programme Edit Option TV/DTV 4 Press the O K button. Option: Select TV/DTV(analogue and digital), TV(analogue only) or DTV(digital only) to search. Press (OK) to start. Auto Tuning Manual Tuning Programme Edit To Start All of programmes will be deleted. continue? Yes No FG Move Select Option: Select TV/DTV(analogue and digital), TV(analogue only) or DTV(digital only) to search. Press (OK) to start. 40

43 5 6 7 Press the E button and then F or G button to select TV(or DTV or TV/DTV) and then press the OK button. Press the F or G button to select Yes. Press the O K button to begin auto programming. All of analogue programmes are deleted and all analogue stations are stored. To stop auto tuning, press the O K button. When auto tuning is completed, the Programme Edit menu appears on the screen. See the Programme Edit section to edit the stored programme. Auto Tuning Manual Tuning Programme Edit Auto Tuning Manual Tuning Programme Edit To Start Option F TV G Option: Select TV/DTV(analogue and digital), TV(analogue only) or DTV(digital only) to search. Press To Start (OK) to start. All of analogue programmes will be deleted. continue? Yes FG Move Select Option: Select TV/DTV(analogue and digital), TV(analogue only) or DTV(digital only) to search. Press No (OK) to start. WATCHING TV/PROGRAMME CONTROL 8 Press EXIT button to return to normal TV viewing or press MENU button to return to the previous menu. Auto Tuning To Start Manual Tuning Programme Edit Processing Auto Tuning... V/UHF CH. 0 0% No channel(s) found! NOTE Press (OK) to stop the current scan and Option: Select start digital TV/DTV(analogue channel scan. and digital), TV(analogue only) or DTV(digital MENU only) to Prev. search. G In Auto Tuning mode, schedule list is deleted. Press (OK) to start. 4

44 WATCHING TV/PROGRAMME CONTROL MANUAL PROGRAMME TUNING In Digital Mode MODE D/A POWER TV VCR BRIGHT DVD RATIO TEXT INFO i GUIDE Manual programme lets you manually add a programme to your programme list. MENU SUBTITLE WATCHING TV/PROGRAMME CONTROL Press the MENU button and then use D or E button to select the SETUP menu. Press the G button and then use D or E button to select Manual Tuning. Auto Tuning Manual Tuning Programme Edit EXIT OK MARK Press the G button and then use D or E button to select the programme number you want to add. Auto Tuning Manual Tuning Programme Edit G Select the digital channel for manual scanning. 4 Press the O K button to store the programme. When the programme number you want to add is already added in programme list, the message Already programmed channel. Do you want to update? will appear. If you want to keep on manual tuning, select YES with using F or G button. Then, press the O K button. Otherwise select N O. When the programme is stored, the Programme edit menu appears on the screen. See the Programme Edit section to edit the stored programme. Auto Tuning Manual Tuning Programme Edit 4 Signal Strength Select the digital channel for manual scanning. D E 7 5 Press EXIT button to return to normal TV viewing or press MENU button to return to the previous menu. Signal strength 4

45 MANUAL PROGRAMME TUNING Continued In Analogue Mode MODE D/A POWER TV VCR BRIGHT DVD RATIO TEXT INFO i GUIDE Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station name with five characters to each programme number. MENU SUBTITLE 4 Press the MENU button and then use D or E button to select the SETUP menu. Press the G button and then use D or E button to select Manual Tuning. Press the G button to select Band. Press the F or G button to select V/UHF or Cable as required. Press the E button to select Channel. Press the F or G button to select the desired channel number. Auto Tuning Manual Tuning Programme Edit EXIT OK MARK WATCHING TV/PROGRAMME CONTROL 5 Press the E button to select Search. Press the F or G button to commence searching. If a station is found the search will stop. Auto Tuning Manual Tuning Programme Edit G Storage 0 Band V/UHF Channel 0 Search Fine 6 If this station is the one required, press the D or E button to select Storage. Select the desired programme number with the F or G button. Name Press the O K button to store it. Auto Tuning Manual Tuning Programme Edit Storage 0 Band F V/UHF G Channel 0 8 To store another station, repeat steps to 7. Search Fine Name Press EXIT button to return to normal TV viewing or press MENU button to return to the previous menu. store 4

46 WATCHING TV/PROGRAMME CONTROL FINE TUNING - In Analogue Mode only Normally fine tuning is only necessary if reception is poor. The finely tuned programme will be indicated by a yellow number during programme selection. D/A POWER BRIGHT RATIO TEXT INFO i MODE TV VCR DVD GUIDE MENU SUBTITLE WATCHING TV/PROGRAMME CONTROL Press the MENU button and then use D or E button to select the SETUP menu. Press the G button and then use D or E button select Manual Tuning. Auto Tuning Manual Tuning Programme Edit EXIT OK MARK Press the G button and then D or E button to select Fine. Auto Tuning Manual Tuning G Storage 0 Programme Edit Band V/UHF 4 Press the F or G button to fine tune for the best picture and sound. Channel 0 Search Fine Name Press the O K button to store. 6 Press EXIT button to return to normal TV viewing or press MENU button to return to the previous menu. Auto Tuning Manual Tuning Programme Edit Storage 0 Band V/UHF Channel Search Fine F G Name store 44

47 ASSIGNING A STATION NAME - In Analogue Mode only You can assign a station name with the characters to each programme number. MODE D/A POWER TV VCR BRIGHT DVD RATIO TEXT INFO i GUIDE MENU SUBTITLE Press the MENU button and then use D or E button to select the SETUP menu. Press the G button and then use D or E button to select Manual Tuning. Auto Tuning Manual Tuning Programme Edit EXIT OK MARK WATCHING TV/PROGRAMME CONTROL Press the G button and then use D or E button to select Name. Auto Tuning Manual Tuning G Storage 0 Programme Edit Band V/UHF 4 Press the F or G button. You can use the numeric 0 to 9, the alphabet A to Z +, -, and blank. Channel 0 Search Fine Name Press the D or E button to select the position and make your choice of the second character, and so on. Auto Tuning 6 Press the O K button to store. Manual Tuning Programme Edit Storage 0 Band V/UHF Channel Search 7 Press EXIT button to return to normal TV viewing or press MENU button to return to the previous menu. Fine Name F G store 45

48 WATCHING TV/PROGRAMME CONTROL PROGRAMME EDIT This function enables you to delete or skip the stored programmes. Also you can move some stations to other programme numbers or copy blank station data into the selected programme number. MODE D/A POWER TV VCR BRIGHT DVD RATIO TEXT INFO i GUIDE MENU SUBTITLE WATCHING TV/PROGRAMME CONTROL Press the MENU button and then use D or E button to select the SETUP menu. Press the G button and then use D or E button to select Programme Edit.. Auto Tuning Manual Tuning Programme Edit EXIT OK MARK Press the G button. Auto Tuning Manual Tuning 4 Deleting a programme (In Analogue Mode Only) a. Select a programme to be deleted with the D or E or F or G button. b. Press the RED button twice. The selected programme is deleted, all the following programmes are shifted up one position. Programme Edit G Selection ( Gor ) leads you to the programme edit screen. Copying a programme (In Analogue Mode Only) a. Select a programme to be copied with the D or E or F or G button. b. Press the GREEN button. c. Move the programme to the desired programme number with the D or E or F or G button. d. Press the GREEN button again to copy the programme. All the following programmes are shifted down one position. 46

49 Moving a programme (In Analogue Mode Only) a. Select a programme to be moved with D or E or F or G button. b. Press the YELLOW button. c. Move the programme to the desired programme number with the D or E or F or G button. d. Press the YELLOW button again to release this function. Skipping a programme number a. Select a programme number to be skipped with D or E or F or G button. b. Press the BLUE button. The skipped programme number turns to blue. c. Press the BLUE button again to release the skipped programme. When a programme number is skipped it means that you will be unable to select it using the PR+ or - button during normal TV viewing. If you want to select the skipped programme, directly enter the programme number with the NUMBER buttons or select it in the programme edit or table menu. MODE D/A POWER TV VCR BRIGHT DVD RATIO TEXT INFO i GUIDE MENU SUBTITLE EXIT MARK OK Q.VIEW VOL PR PAGE MUTE LIST 0 FAV SIZE INDEX TIME? REVEAL I/II USB SLEEP WATCHING TV/PROGRAMME CONTROL Selecting Favourite Programme a. Select your favourite programme number with D or E or F or G button and then press the FAV button. It will automatically include the selected programme into your favourite programmes list and a heartmark will appear in front of that programme number. 5 Repeatedly press the FAV button to select stored favourite programmes in normal TV viewing. 47

50 ! WATCHING TV/PROGRAMME CONTROL WATCHING TV/PROGRAMME CONTROL LIST Press the button to display external device that is connected to the unit, on screen. Press the OK button to change the input to the active external device. Use the button to select the input source. If all external input sources are connected: Digital HDMI Analogue AV If any external input sources are not connected: Input List Digital Analogue AV AV Component AV E AV Component HDMI HDMI RGB-PC Component POWER BRIGHT RATIO TEXT INFO EXIT D/A MENU OK MODE TV VCR DVD GUIDE SUBTITLE MARK Digital Analogue If there is any external input source connected: (ex: When connected only to AV ) Digital Analogue AV Digital : Select it when watching the Digital TV. Analogue : Select it when watching the Analog TV. AV, AV : Select it when watching the VCR or external equipment. Component - : Select it when using the DVD or the Digital set-top box depend on connector. RGB-PC : Select it when using PC depend on connector. HDMI, HDMI, HDMI : Select it when using DVD, PC or Digital set-top box depend on connector. 48

51 CALLING UP THE CHANNEL LIST You can check the programmes stored in the memory by displaying the channel list. DIGITAL ABC TV Sydney D/A POWER BRIGHT RATIO TEXT INFO i MODE TV VCR DVD GUIDE Channel List Displaying Channel list 0! Press the LIST button to display the Channel List menu. The Channel list appears on the screen. NOTE G You may find some gray programmes. They have been set up to be skipped by auto tuning or in the programme edit mode. G Some programmes with the channel number shown in the channel LIST indicate there is no station name assigned. E MENU SUBTITLE EXIT MARK OK Q.VIEW VOL PR PAGE MUTE LIST 0 FAV SIZE INDEX TIME? REVEAL I/II USB WATCHING TV/PROGRAMME CONTROL SLEEP Selecting a programme in the channel list Select a programme with the D or E buttons. The set switches to the chosen programme number. Paging through a channel list Press the D or E button to changes current channel into previous or next channel. 49

52 WATCHING TV/PROGRAMME CONTROL SOURCE SELECTION Alternatively you can select the Digital, Analogue, AV-, Component -, RGB-PC, HDMI// mode by pressing the button. Press the D/A button to select digital or analogue mode. D/A POWER BRIGHT RATIO TEXT INFO i MODE TV VCR DVD GUIDE MENU SUBTITLE WATCHING TV/PROGRAMME CONTROL Press the MENU button and then use D or E button to select the OPTION menu. Press the G button and then use D or E button to select Input Label. EXIT Subtitle : Off Input Label : Off Key Lock : Off Set ID : ISM Method Low Power Front Display Factory Reset Model Info OK QVIEW MARK 4 Press the G button and then use D or E to select AV, AV, Component, Component, RGB-PC, HDMI//. Press the G button and then use F or G to select the label. Subtitle Input Label Key Lock Set ID ISM Method Low Power Front Display Factory Reset Model Info G AV AV Component Component RGB-PC HDMI HDMI HDMI PC VCR DVD Set Top Box VCR Game Satellite Cable Box 5 Press EXIT button to return to normal TV viewing or press MENU button to return to the previous menu.! NOTE G If you select PC label in HDMI// mode, the picture size will be adjusted to PC mode size. 50

53 D/A POWER BRIGHT MODE TV VCR DVD RATIO TEXT INFO i GUIDE This operates only for the devices with the logo. Please check the logo. This allows you to control and play other AV devices connected to the display through HDMI cable without additional cables and settings. If you do not want menu, select Off. Press the MENU button and then use D or E button to select the OPTION menu. Press the G button and then use D or E button to select. MENU EXIT Subtitle : Off Input Label : Off Key Lock : Off Set ID : ISM Method Low Power Front Display Factory Reset Model Info OK SUBTITLE MARK WATCHING TV/PROGRAMME CONTROL Press the G button and then use D or E button to select On or Off. Subtitle Input label G Off 4 Press EXIT button to return to normal TV viewing or press MENU button to return to the previous menu. Key Lock Set ID ISM Method Low Power Front Display On Factory Reset Model Info 5

54 WATCHING TV/PROGRAMME CONTROL Functions WATCHING TV/PROGRAMME CONTROL Disc playback Control connected AV devices by pressing the D or E or F or G, OK buttons and buttons for play, stop, pause, fast reverse, fast forward, chapter skip.(the button does not provide such functions) Direct Play After connecting AV devices to TV, you can directly control the devices and play media without additional settings. Select AV device Enables you to select one of AV devices connected to TV and play it. Power off all devices When you power off TV, all connected devices are turned off. Switch audio-out Offers an easy way to switch audio-out. * A device, which is connected to TV through HDMI cable but does not support Simplink, does not provide this function. Menu Press the D or E or F or G button and then OK button to select the desired source. TV viewing : Switch to the previous TV programme regardless of the current mode. DISC playback : Select and play discs. When multiple discs are available, the titles of the discs are conveniently displayed at the bottom of the screen. G Selected Device 4 5 VCR playback : Play and control the connected VCR. HDD Recordings playback : Play and control recordings stored in HDD. Audio Out to Home theatre/audio Out to TV : Select Home theatre or TV speaker for Audio Out. 4 5 G When no device is connected (displayed in gray) G When a device is connected (displayed in bright colour)! NOTE G Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the rear terminal (HDMI terminal) of the device with the HDMI cable. G After connecting the HDMI terminal for the home theater with function in the above method, connect the VARIABLE AUDIO OUT terminal on the back of the TV to the VARIABLE AUDIO IN terminal on the back of the device with the VARIABLE AUDIO OUT cable. G When operating the external device with, press the TV button among the MODE button on the remote controller. G When you switch the Input source with the button on the remote controller, you can stop the operation of device controlled by. G When you select or operate the media device with home theater function, the speaker automatically switches to home theater speaker (HT speaker). G When you execute Photo List, Music List function during DVD playback included in home theater supported the stops and the applicable function is executed after switching the input to TV. 5

55 KEY LOCK The TV can be set up so that it can only be used with the remote control. This feature can be used to prevent unauthorized viewing by locking out the front panel controls. This TV is programmed to remember which option it was last set to even if you turn the TV off. Press the MENU button and then use D or E button to select the OPTION menu. Press the G button and then use D or E button to select Key Lock. MODE D/A POWER TV VCR BRIGHT DVD RATIO TEXT INFO i GUIDE MENU SUBTITLE EXIT MARK OK Subtitle : Off Input Label : Off Key Lock : Off Set ID : ISM Method Low Power Front Display Factory Reset Model Info WATCHING TV/PROGRAMME CONTROL 4 Press the G button and then use D or E button to select On or Off. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. Subtitle Input Label Key Lock Set ID ISM Method Low Power Front Display Factory Reset Model Info G Off On! NOTE G With the lock on, the display Key Lock appears on the screen if any button on the front panel is pressed while viewing the TV. G The display Key Lock will not appear on the screen if any button on the front panel is pressed while displaying the menus. 5

56 ENTRY MODES [X-STUDIO Menu] When you connect a USB device or press the displayed, automatically. button, this screen is In USB device, you can not add a new folder or delete the existing folder. Press the D or E button to select the desired item. X-STUDIO Press the OK button to move to Photo List or Music List of USB device. Press the USBD button of remote control before removing the USB device. LIST 0 FAV SIZE INDEX TIME? REVEAL I/II USB SLEEP! NOTE Press the USBD button of remote control before removing the USB device. Only a USB storage device is recognizable. If the USB storage device is connected through a USB hub, the device is not recognizable. A USB storage device using an automatic recognition program may not be recognized. A USB storage device which uses its own driver may not be recognized. In case of a card reader, up to four memory cards are concurrently recognizable. The recognition speed of a USB storage device may depend on each device. Please do not turn off the TV or unplug the USB device when the connected USB storage device is working. When such device is suddenly separated or unplugged, the stored files or the USB storage device may be damaged. To unplug the USB storage device, please press the USBD button on the remote control, and then unplug it safely. Please do not connect the USB storage device which was artificially maneuvered on the PC. The device may cause the product to malfunction or fail to be played. Never forget to use only a USB storage device which has normal music files or image files. Please use only a USB storage device which was formatted as a FAT or a NTFS file system provided with the Windows operating system. In case of a storage device formatted as a different utility program which is not supported by Windows, it may not be recognized. In case of a hard disk drive (HDD) formatted as NTFS, writing and deletion are not allowable. Please connect power to a USB storage device which requires an external power supply. If not, the device may not be recognized. Please connect a USB storage device with cable is offered by USB maker. If connected with cable is not offered by USB maker or an excessively long cable, the device may not be recognized. Some USB storage devices may not be supported or operated smoothly. If the name of a folder or file is too long, it will not be displayed or recognized. 54

57 PHOTO LIST It s available to playback the photo file(*.jpeg/*.jpg) in the USB device. The On Screen Display may be different from your set. Images are an example to assist with the TV operation. Screen Components X-STUDIO Usable USB memory Current page/total pages Total number of marked thumbnail photos Corresponding buttons on the remote control 55

58 Photo Selection and PopUp Menu As shown, up to 5 thumbnail photos are listed per page. Use the PR + or - button to navigate in the thumbnail photo page. X-STUDIO Use the MARK button to mark or unmark a photo. When one or more photos are marked, you can view individual photos or a slide show of the marked photos. If no photos are marked, you can view all photos individually or all photos in the folder in a slide show. Use D or E or F or G button to navigate the appropriate thumbnail photos, then press the OK button to show the PopUp menu. View : Display the selected item. Mark All : Mark all photos on the screen. Delete : Delete the selected photo item. Cancel : Close the pop-up menu. 4 Repeatedly, press EXIT button to return to TV viewing or press the button to return to the X-STUDIO menu. 56

59 Set up the menu in Full-Sized Screen You can change the settings to display photos stored on a USB device, on a full-sized screen. Detailed operations are available on full-sized photo view screen. Use the PR + or - button to navigate the thumbnail photo page. Home Use D or E or F or G button to navigate the appropriate thumbnail photos, then press the OK button to show the PopUp menu. X-STUDIO Use D or E button to Move to the View menu, then press the OK button. 4 The selected photo is displayed in full size. Slide Show : When no picture is selected, all photos in the current folder are displayed during slide show. When selected, the selected photos are displayed during slide show. To start slide show, press OK button on. Set the time interval of the slide show in Option. A slide show continues for a maximum of 4 hours. After 4 hours, the slide show will end and go to TV mode or external input mode. BGM : Listen to music while viewing photos in full size. To start BGM, press OK button on. Set the BGM device and album in Option. (Rotate) : Rotate photos. Rotates the photo 90, 80, 70, 60 clockwise upon OK button on (Rotate). Delete : Delete photos. UseF or G button to select Delete and press OK button. The aspect ratio of a photo may change the size of the photo displayed on the screen in full size. 57

60 X-STUDIO Option : Set values for Slide Speed and Music folder. Use F or Gbutton to select Option and press OK button. Use F or G button and OK button to set values. Then go to OK and press OK to save the settings. You cannot change Music Folder while BGM is playing. Hide : Hide the menu on the full-sized screen. Use F or G button to select Hide and press OK button. To see the menu again on the full-sized screen, press OK button to display. OK 5 Use D or E or F or G button to select the previous or next photo. Use D or E or F or G button to select and control the menu on the full-sized screen. 6 Use EXIT button to go back to the photo list from the full sized screen. 7 Repeatedly, press EXIT button to return to TV viewing or press button to return to the X-STUDIO menu.! NOTE If it is Progressive JPEG format, some photos may be not decoded. 58

61 MUSIC LIST Purchased music files(*.mp) may contain copyright restrictions. Playback of these files may not be supported by this model. Music file on your USB device can be played by this unit. The On Screen Display may be different from your set. Images are an example to assist with the TV operation. Screen Components X-STUDIO Usable USB memory Current page/total pages Total number of marked music Current playing time/total playing time Corresponding buttons on the remote control 59

62 Music Selection and PopUp Menu As shown, up to 8 music titles are listed per page. Use the PR + or - button to navigate in the music titles page. X-STUDIO Use MARK button to mark or unmark a music. When one or more music files are marked, the marked music will be played in sequence. For example, if you want to listen to only one music repeatedly, just mark the music only and play it. If no music is marked, all the music in the folder will be played in sequence. Use D or E button to navigate the appropriate music, then press the OK button to show up the pop-up menu. Play (During stop) : Play the selected music. Once a music finishes playing, the next selected one will be played. When there are no selected music to play, the next one in the current folder will be played. If you go to a different folder and press the OK button, the current music in playback will stop. Stop Play (During playback) : Stop the playing music. Play With Photo : Start playing the selected music and then move to the Photo List. Mark All : Mark all music in the folder. Delete : Delete the selected music. Cancel : Close the pop-up menu. 60

63 4 Repeatedly, press EXIT button to return to TV viewing or press button to return to the X-STUDIO menu. If you don't press any button for a while during the playing, the play information box (as shown in the below) will float as a screen saver. The Screen Saver? Screen saver is to prevent screen pixel damage due to an fixed image remaining on the screen for a extended period of time. X-STUDIO! NOTE When music is playing, is displayed in front of the music title. A damaged or corrupted music does not play but displays 00:00 in playtime. A music downloaded from a paid service with copyright protection does not start but displays inappropriate information in playtime. If you press OK,, EXIT buttons, screen saver is stopped. The,,,, buttons on the remote control are also available in this mode. 6

64 EPG(ELECTRONIC PROGRAMME GUIDE) - In Digital Mode Only This system has an Electronic Programme Guide (EPG) to help your navigation through all the possible viewing options. D/A POWER BRIGHT RATIO TEXT INFO i MODE TV VCR DVD GUIDE The EPG supplies information such as programme listings, start and end times for all available services. In addition, detailed information about the programme is often available in the EPG (the availability and amount of these programme details will vary, depending on the particular broadcaster). EXIT MENU SUBTITLE MARK This function can be used only when the EPG information is broadcasted by broadcasting companies. OK EPG(ELECTRONIC PROGRAMME GUIDE) The EPG displays the programme description for next 7 days. Switch on/off EPG Press the GUIDE button to switch on EPG. Press the GUIDE or EXIT button again to switch off EPG and return to TV viewing. Select a programme Press the D or E or F or G buttons to select desired programme, then press the O K button to display the selected programme. 6

65 Button Function in NOW/NEXT Guide Mode X-STUDIO Schedule Remote Control Buttons GREEN YELLOW BLUE D/E/F/G EXIT INFO i Function Change to 7Day s EPG Guide Shows the Schedule list Selects the Radio programmes Select the Broadcasting Programme Switch off EPG The detail information on or off Button Function in 7 Days Guide Mode Sat 0 Jan Schedule Remote Control Buttons GREEN RED YELLOW BLUE D/E/F/G EXIT INFO i Function Change to Now/Next Guide Enter Timer Reservation/Cancel setting mode Shows the Schedule List Selects the Radio programmes Select the Broadcasting Programme Switch off EPG Selects the page Selects the day The detail information on or off 6

66 EPG(ELECTRONIC PROGRAMME GUIDE) Button Function in Extended Description Box Digital EPG(ELECTRONIC PROGRAMME GUIDE) Remote Control Buttons Function Change to the selected programme INFO i The detail information on or off Button Function in Reservation Setting Mode Schedule List Programme Start date Start time Remote Control Buttons YELLOW PR +/ - Function Change to Guide Page Up/Down Delete the selected item 64

67 PICTURE CONTROL PICTURE SIZE(ASPECT RATIO)CONTROL You can watch TV in various picture formats; Auto, 4:, 6:9 (Wide), 4:9, Zoom and : Pixel. D/A POWER BRIGHT RATIO TEXT INFO i MODE TV VCR DVD GUIDE! NOTE G If a fixed image is displayed on the screen for a long time, it image may become imprinted on the screen and remain visible. This phenomenon is common to all manufacturers and in consequence the manufacturer s warranty does not cover the product bearing this phenomenon. EXIT MENU OK SUBTITLE MARK Press the RATIO button repeatedly to select the desired picture format. You can also adjust Aspect Ratio in the PICTURE menu. Auto Selects the proper picture proportion to match the source s image. (4: 4:, 6:9 6:9) 4: Choose 4: when you want to view a picture with an original 4: aspect ratio. 6:9 Adjust the picture horizontally, in a linear proportion to fill the entire screen. 4:9 The screen size is, more enlarged at both sides, to create a spectacular view. You can move the 4:9 screen using D or E button. The adjustment range is Zoom Choose Zoom when you want to view the picture without any alteration. However, the top and bottom portions of the picture will be cropped. You can move the Zoom screen using D or E button. The adjustment range is : Pixel Choose :Pixel when you want to view the picture of best quality without loss of original picture in high resolution image. (4/47/5LB9DF*, 50/60PYDF* only) PICTURE CONTROL! NOTE G In HDMI/DVI-PC and RGB-PC mode, 4: and 6:9 is available. G Auto: When your TV receives the wide screen signal, it will be automatically changed to the picture format sent. (Not available in all countries) G In HDMI/DVI(080i or 080p)mode, : Pixel is available. 65

68 PICTURE CONTROL PRESET PICTURE SETTINGS Picture Mode -Preset D/A POWER BRIGHT RATIO TEXT INFO i MODE TV VCR DVD GUIDE Intelligent Eye Adjusts picture according to the surrounding conditions.(lcd TV models only) Dynamic Select this option to display with a sharp image. Standard The most general and natural screen display status. Mild Select this option to display with a mild image. User / Select this option to use the user-defined setting. EXIT MENU OK SUBTITLE MARK Press the MENU button and then use D or E button to select the PICTURE menu. Picture Mode : User PICTURE CONTROL Press the G button and then use D or E button to select Picture Mode. Press the G button and then use D or E button to select Intelligent Eye(LCD TV models only), Dynamic, Standard, Mild, User, or User. Colour Temperature : Cool XD Advanced Aspect Ratio : 6:9 Picture Reset Screen 4 Press EXIT button to return to normal TV viewing or press MENU button to return to the previous menu. Picture Mode G Colour Temperature Intelligent Eye Dynamic XD Standard Picture Mode adjusts the TV for the best picture appearance. Select the preset value in the Picture Mode menu based on the programme category. Advanced Aspect Ratio Picture Reset Screen Mild User User Intelligent Eye (LCD TV models only), Dynamic, Standard and Mild are programmed for optimum picture reproduction at the factory and cannot be changed. When the Intelligent eye function is on, the most suitable picture is automatically adjusted according to the surrounding conditions. (LCD TV models only)! NOTE G In RGB-PC, HDMI-PC mode, to get the best picture quality, adjust the picture mode to Standard. 66

69 Auto Colour Tone Control (Warm/Medium/Cool) Choose one of three automatic colour adjustments. Set to warm to enhance hotter colours such as red, or set to cool to see less intense colours with more blue. When selecting Picture Mode options (Dynamic, Standard and Mild), Colour Temperature is automatically change. When selecting Picture Mode options (User and User ), you can choose the Colour Temperature. MODE D/A POWER TV VCR BRIGHT DVD RATIO TEXT INFO i GUIDE MENU EXIT SUBTITLE MARK OK Press the MENU button and then use D or E button to select the PICTURE menu. Press the G button and then use D or E button to select Colour Temperature. Press the G button and then use D or E button to select either Cool, Medium, Warm or User. Picture Mode : User Colour Temperature : Cool XD Advanced Aspect Ratio : 6:9 Picture Reset Screen Picture Mode PICTURE CONTROL Colour Temperature G Cool XD Medium 4 Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. Advanced Aspect Ratio Picture Reset Screen Warm User 67

70 PICTURE CONTROL POWER MANUAL PICTURE ADJUSTMENT Picture Mode -User Option EXIT MENU SUBTITLE MARK You can adjust picture Contrast, Brightness,Colour, Sharpness, Tint and Back Light options to the levels you prefer. VOL OK Q.VIEW PR PAGE MUTE Picture Mode : User Colour Temperature XD Advanced Aspect Ratio : 6:9 PICTURE CONTROL Press the MENU button and then use D or E button to select the PICTURE menu. Press the G button and then use D or E button to select Picture Mode. Press the G button and then use D or E button to select User or User. Picture Reset Screen Picture Mode Colour Temperature XD Advanced Aspect Ratio Picture Reset Screen Intelligent Eye Dynamic Standard Mild User User G Selection ( G or ) leads you to the detailed setting screen. 4 Press the G button and then use D or E button to select the desired picture option (Contrast, Brightness, Colour, Sharpness, Tint or Back Light (LCD models only)). User Contrast 85 G Brightness 50 Colour 50 5 Press the G button and then use F or G button to make appropriate adjustments. Sharpness 50 Tint 0 Back Light 50 R G Press MENU to confirm. 6 Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. E Contrast 85 E 68

71 Colour Tone -User Option EXIT MENU SUBTITLE MARK You can also adjust the detailed settings(red, Green, Blue) by selecting the User menu. This feature operate only if the picture mode set User or User. VOL OK Q.VIEW PR PAGE MUTE Picture Mode : User Colour Temperature : Cool XD Advanced Aspect Ratio : 6:9 Press the MENU button and then use D or E button to select the PICTURE menu. Press the G button and then use D or E button to select Colour Temperature. Press the G button and then use D or E button to select User. Picture Reset Screen Picture Mode Colour Temperature XD Advanced Aspect Ratio Picture Reset Screen Cool Medium Warm User G PICTURE CONTROL Selection ( G or ) leads you to the detailed setting screen. 4 5 Press the G button and then use D or E button to select Red, Green, or Blue. Press the G button and then use F or G button to make appropriate adjustments. User Red 0 G Green 0 Blue 0 The adjustment range of Red, Green, or Blue is -0~ +0. Press MENU to confirm. 6 Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. E Red 0 E 69

72 PICTURE CONTROL BRIGHTNESS ADJUSTMENT Adjust the brightness using this button on the remote control. In Intelligent Eye mode, Brightness adjustment is not available. MODE D/A POWER TV VCR BRIGHT DVD RATIO TEXT INFO i GUIDE PICTURE CONTROL Press the button. Adjust the desired screen brightness. 70

73 XD - PICTURE IMPROVEMENT TECHNOLOGY XD is LG Electronics unique picture improving technology to display a real HD source through an digital signal processing algorithm. D/A POWER BRIGHT MODE TV VCR DVD When selecting Picture Mode options (Intelligent Eye, Dynamic, Standard and Mild), XD is automatically change to Auto. RATIO TEXT INFO i GUIDE When selecting Picture Mode options (User and User ), you can choose the Auto / Manual and when selecting Manual, you can adjust the XD Contrast, XD colour and XD Noise. EXIT MENU SUBTITLE MARK OK Press the MENU button and then use D or E button to select the PICTURE menu. Press the G button and then use D or E button to select XD. Press the G button and then use F or G button to select Auto or Manual. * Selecting the Manual. Press the E button and then use D or E button to select XD Contrast, XD Colour or XD Noise. XD Contrast : Optimizing the contrast automatically according to the brightness of the reflection. XD Colour : Adjusting the colours of the reflection automatically to reproduce as closely as possible to the natural colours. XD Noise : Removing the noise up to the point where it does not damage the original picture. Picture Mode : User Colour Temperature : Cool XD Advanced Aspect Ratio : 6:9 Picture Reset Screen Picture Mode Colour Temperature XD G Manual Advanced Aspect Ratio XD Contrast On Picture Reset XD Colour On Screen XD Noise On PICTURE CONTROL. Use the F or G button to select O n or Off. 4 Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. 7

74 PICTURE CONTROL ADVANCED -CINEMA D/A POWER BRIGHT MODE TV VCR DVD Set up the TV for the best picture appearance for viewing movies. RATIO TEXT INFO i GUIDE When you operate Cinema, the TV will adjust 4 fps video from movies to 0 fps video for display (This function is only available in TV(Analog, DTV), AV, AV, Component 480i, 576i mode.) EXIT MENU SUBTITLE MARK OK PICTURE CONTROL Press the MENU button and then use D or E button to select the PICTURE menu. Press the G button and then use D or E button to select Advanced. Press the G button and then use D or E button to select Cinema. Picture Mode : User Colour Temperature : Cool XD Advanced Aspect Ratio : 6:9 Picture Reset Screen Picture Mode Colour Temperature 4 Press the G button and then use F or G button to select On or Off. XD Advanced Aspect Ratio Picture Reset G Cinema Black Level Off Low Screen 5 Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. 7

75 ADVANCED-BLACK(DARKNESS) LEVEL D/A POWER BRIGHT MODE TV VCR DVD Adjusting the contrast and the brightness of the screen using the black level of the screen. RATIO TEXT INFO i GUIDE This feature operates only in HDMI, HDMI, HDMI or AV, AV mode. EXIT MENU SUBTITLE MARK OK Press the MENU button and then use D or E button to select the PICTURE menu. Press the G button and then use D or E button to select Advanced. Press the G button and then use D or E button to select Black Level. Picture Mode : User Colour Temperature : Cool XD Advanced Aspect Ratio : 6:9 Picture Reset Screen Picture Mode PICTURE CONTROL Colour Temperature 4 Press the G button and then use F or G button to select Low, or High. XD Advanced Aspect Ratio Picture Reset G Cinema Black Level Off Low Screen Low The reflection of the screen gets darker. High The reflection of the screen gets brighter. 5 Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. 7

76 PICTURE CONTROL PICTURE RESET Use to quickly reset all the Picture menu options to their original factory preset values. MODE D/A POWER TV VCR BRIGHT DVD RATIO TEXT INFO i GUIDE EXIT MENU SUBTITLE MARK OK PICTURE CONTROL Press the MENU button and then use D or E button to select the PICTURE menu. Press the G button and then use D or E button to select Picture Reset. Press the G button to reset the Picture menu options to original values. Picture Mode : User Colour Temperature : Cool XD Advanced Aspect Ratio : 6:9 Picture Reset Screen Picture Mode Colour Temperature XD Advanced Aspect Ratio Picture Reset Screen G Selection ( G or ) resets the video configuration. 74

77 IMAGE STICKING MINIMIZATION(ISM) METHOD (Only Plasma TV model) A frozen still picture from a PC/video game displayed on the screen for prolonged periods will result in a fixed ghost image. Use our unique method to minimize any fixed image on the screen. MODE D/A POWER TV VCR BRIGHT DVD RATIO TEXT INFO i GUIDE MENU SUBTITLE Press the MENU button and then use D or E button to select the OPTION menu. EXIT OK MARK Press the G button and then use D or E button to select ISM Method. Press the G button and then use D or E button to select either Normal, Orbiter, Inversion or White wash. Normal If image sticking is never a problem, ISM is not necessary - set to Normal. Orbiter Orbiter may help prevent ghost images. However, it is best not to allow any fixed image to remain on the screen. To avoid a permanent image on the screen, the image will move once per minutes. Inversion Inversion will automatically invert the plasma display panel color every 0 minutes. White wash White Wash removes permanent images from the screen. Subtitle : Off Input Label : Off Key Lock : Off Set ID : ISM Method Low Power Front Display Factory Reset Model Info Subtitle Input Label Key Lock Set ID ISM Method G Low Power Front Display Factory Reset Model Info Normal Orbiter Inversion White Wash PICTURE CONTROL! NOTE G An excessive permanent image may be impossible to clear entirely with White Wash. To return to normal viewing, press any button. 4 Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. 75

78 PICTURE CONTROL LOW POWER (Only Plasma TV model) Low power reduces the plasma display power consumption. D/A POWER BRIGHT MODE TV VCR DVD RATIO TEXT INFO i GUIDE EXIT MENU SUBTITLE MARK OK PICTURE CONTROL Press the MENU button and then use D or E button to select the OPTION menu. Press the G button and then use D or E button to select Low Power. Press the G button and then use D or E button to select O n or Off. Subtitle : Off Input Label : Off Key Lock : Off Set ID : ISM Method Low Power Front Display Factory Reset Model Info Subtitle 4 When you select O n, the screen darkens. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. Input Label Key Lock Set ID ISM Method Low Power Front Display Factory Reset Model Info G Off On 76

79 FRONT DISPLAY (50/60PYDF* only) Illuminates brightly when the set is turned on. The LED displays current TV status. MODE D/A POWER TV VCR BRIGHT DVD RATIO TEXT INFO i GUIDE EXIT MENU SUBTITLE MARK OK Press the MENU button and then use D or E button to select the OPTION menu. Press the G button and then use D or E button to select Front Display. Press the G button and then use D or E button to select Off, Dark or Bright. Subtitle : Off Input Label : Off Key Lock : Off Set ID : ISM Method Low Power Front Display Factory Reset Model Info PICTURE CONTROL Subtitle Input Label 4 Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. Key Lock Set ID ISM Method Low Power Front Display Factory Reset Model Info G Off Dark Bright 77

80 SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER(AUTO VOLUME ) AVL automatically keeps on an equal volume level even if you change programmes. MODE D/A POWER TV VCR BRIGHT DVD RATIO TEXT INFO i GUIDE EXIT MENU SUBTITLE MARK OK Press the MENU button and then use D or E button to select the AUDIO menu. Sound Mode : Standard Auto Volume : On Balance : 0 TV Speaker : On SOUND & LANGUAGE CONTROL 4 Press the G button and then use D or E button to select Auto Volume. Press the G button and then use D or E button to select On or Off. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. Sound Mode Auto Volume Balance TV Speaker G Off On 78

81 PRESET SOUND SETTINGS -SOUND MODE Sound Mode lets you enjoy the best sound without any special adjustment because the TV sets the appropriate sound options based on the program content. Standard, Music, Movie, Sports and User are preset for good sound quality at the factory and are not adjustable. D/A POWER BRIGHT RATIO TEXT INFO i MODE TV VCR DVD GUIDE EXIT MENU SUBTITLE MARK OK Press the MENU button and then use D or E button to select the AUDIO menu. Press the G button and then use D or E button to select Sound Mode. 4 Press the G button and then use D or E button to select Standard, Music, Movie, Sports, or User. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. Sound Mode : Standard Auto Volume : On Balance : 0 TV Speaker : On Sound Mode Auto Volume Balance TV Speaker G Standard Music Movie Sports User SOUND & LANGUAGE CONTROL 79

82 SOUND & LANGUAGE CONTROL SOUND SETTING ADJUSTMENT-USER MODE D/A POWER BRIGHT MODE TV VCR DVD Adjust the sound to suit your taste and room situations. RATIO TEXT INFO i GUIDE EXIT MENU SUBTITLE MARK OK Press the MENU button and then use D or E button to select the AUDIO menu. Sound Mode Auto Volume Balance TV Speaker Standard Music Movie Sports User G SOUND & LANGUAGE CONTROL 4 Press the G button and then use D or E button to select Sound Mode. Press the G button and then use D or E button to select User. Press the G button and then use D or E button to select the desired sound option ( Treble, Bass, or Front Surround ). Selection ( G or ) leads you to the detailed setting screen. User Treble 50 G Bass 50 Front Surround Off Press MENU to confirm. 80

83 R 5 Press the G button and then use or button to make appropriate adjustments. * Selecting the Front Surround Press the G button and then use or button to select Off or SRS (Sound Retrieval System)TruSurround XT. Front Surround SRS TruSurround XT 6 Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. SRS TruSurround XT Takes advantage of any multi-channel format without needing to add extra speakers or equipment. Dialog clarity, bass enrichment, and the addition of stereo audio enhancement produces an immersive sound experience from standard stereo material. SOUND & LANGUAGE CONTROL TruSurround XT G is a trademark of SRS Labs, Inc. G TruSurround XT technology is incorporated under license from SRS Labs, Inc. 8

84 SOUND & LANGUAGE CONTROL BALANCE Adjust the left/right sound of speaker to suit your taste and room situations. MODE D/A POWER TV VCR BRIGHT DVD RATIO TEXT INFO i GUIDE EXIT MENU SUBTITLE MARK OK Press the MENU button and then use D or E button to select the AUDIO menu. Sound Mode : Standard Auto Volume : On Balance : 0 TV Speaker : On SOUND & LANGUAGE CONTROL 4 Press the G button and then use D or E button to select Balance. Press the G button and then use or button to make appropriate adjustments. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. Sound Mode Auto Volume Balance 0 TV Speaker L R Balance 0 L R 8

85 TV SPEAKERS ON/OFF SETUP Turn the TV speakers off if using external audio equipment. Feature turns the TV Speakers option On or Off. MODE D/A POWER TV VCR BRIGHT DVD RATIO TEXT INFO i GUIDE EXIT MENU SUBTITLE MARK OK Press the MENU button and then use D or E button to select the AUDIO menu. Sound Mode : Standard Auto Volume : On Balance : 0 TV Speaker : On 4 Press the G button and then use D or E button to select TV Speaker. Press the G button and then use D or E button to select On or Off. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. Sound Mode Auto Volume Balance TV Speaker G Off On SOUND & LANGUAGE CONTROL 8

86 SOUND & LANGUAGE CONTROL I/II D/A POWER MODE TV STEREO/DUAL RECEPTION - In Analogue Mode only BRIGHT VCR DVD Mono sound selection RATIO TEXT INFO i GUIDE If the stereo signal is weak in stereo reception, you can switch to mono by pressing the I/II button twice. In mono reception, the clarity of sound is improved. To switch back to stereo, press the I/II button twice again. EXIT MENU SUBTITLE MARK Broadcast On Screen Display OK Mono MONO Q.VIEW Stereo MONO / STEREO VOL PR PAGE MUTE SPEAKER SOUND OUTPUT SELECTION SOUND & LANGUAGE CONTROL In AV -, Component -, RGB-PC, HDMI// mode, you can select output sound for the left and right loudspeakers. Repeatedly press the I/II button to select the sound output. L+R: Audio signal from audio L input is sent to the left loud speaker and audio signal from audio R input is sent to the right loud speaker. L+L: Audio signal from audio L input is sent to left and right loud speakers. R+R: Audio signal from audio R input is sent to left and right loud speakers. LIST 0 FAV SIZE INDEX TIME? REVEAL I/II USB SLEEP! NOTE G In digital mode, if the OSD (On Screen Display) is Displayed on the screen after press the I/II button, you can selected the audio language and type(mpeg or DOLBY DIGITAL). G IN MPEG mode only, you can selected L or R audio sound. 84

87 SUBTITLE - In Digital Mode only You can select Subtitle on or off with the SUBTITLE button in DTV mode. D/A POWER BRIGHT RATIO TEXT INFO i MODE TV VCR DVD GUIDE EXIT MENU SUBTITLE MARK OK Press the MENU button and then use D or E button to select the OPTION menu. Subtitle Input Label : Off : Off Key Lock : Off Set ID : Factory Reset 4 Press the G button and then use D or E button to select Subtitle. Press the G button and then use D or E button to select On or Off. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. Model Info Subtitle Input Label Key Lock Set ID Factory Reset Model Info G Off On SOUND & LANGUAGE CONTROL 85

88 TIME SETTING CLOCK SETTING Auto Clock Setting D/A POWER BRIGHT MODE TV VCR DVD RATIO TEXT INFO i GUIDE The time is set automatically from a digital channel signal. The digital channel signal includes information for the current time provided by the broadcasting station. Set the clock manually if the current time is set incorrectly by the auto clock function. EXIT MENU OK SUBTITLE MARK Press the MENU button and then use D or E button to select the TIME menu. Press the G button and then use D or E button to select Clock. Clock : :-- -- Off Time : Off On Time : Off Sleep Time : Off Auto Sleep : Off TIME SETTING 4 Press the G button and then use D or E button to select Auto. Press the G button and then use D or E button to select your viewing area Time Zone : NT, TAS, WA, SA, QLD, VIC, or NSW/ACT. Clock Off Time On Time Sleep Time Auto Sleep G Auto Year Date - - / - - Time - - : Time Zone TAS 5 Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. Clock G Auto Off Time On Time Sleep Time Year Date - - / - - Time - - : Auto Sleep Time Zone TAS 86

89 Manual Clock Setting MODE D/A POWER TV VCR BRIGHT DVD RATIO TEXT INFO i GUIDE If the current time setting is wrong, reset the clock manually. EXIT MENU SUBTITLE MARK OK Press the MENU button and then use D or E button to select the TIME menu. Press the G button and then use D or E button to select Clock. Clock : :-- -- Off Time : Off On Time : Off Sleep Time : Off Auto Sleep : Off 4 Press the G button and then use D or E button to select Manual. Press the G button and then use F or G button to select either the year, date, or time option. Once selected, use the D or E button to set the year, date, and time options. Clock Off Time On Time Sleep Time Auto Sleep G Manual Year Date - - / - - Time - - : TIME SETTING 5 Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. 87

90 TIME SETTING AUTO ON/OFF TIMER SETTING The timer function operates only if the current time has been set. The Off-Time function overrides the On-Time function if they are both set to the same time. The TV must be in standby mode for the On-Time to work. If you do not press any button within hours after the TV turns on with the On Time function, the TV will automatically revert to standby mode. MODE D/A POWER TV VCR BRIGHT DVD RATIO TEXT INFO i GUIDE MENU EXIT SUBTITLE MARK OK Press the MENU button and then use D or E button to select the TIME menu. Press the G button and then use D or E button to select On Time or Off Time. Clock : :-- -- Off Time : Off On Time : Off Sleep Time : Off Auto Sleep : Off TIME SETTING 4 5 Press the G button and then use D or E button to select On. To cancel On Time or Off Time function, select Off. Press the G button and then use D or E button to set the hour. Press the G button and then use D or E button to set the minutes. Clock Off Time On Time Sleep Time Auto Sleep G Off On Time 6 : 0 AM PR DIGITAL 7 Vol. 7 6 Only On Time Press the G button and then use D or E button to select the channel at turn-on. Press the G button and then use D or E button to set the sound level at turn-on. 7 Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. 88

91 SLEEP TIMER SETTING You don t have to remember to switch the set off before you go to sleep. The sleep timer automatically switches the set to standby after the preset time has elapsed. D/A POWER BRIGHT RATIO TEXT INFO i MODE TV VCR DVD GUIDE EXIT MENU SUBTITLE MARK Press the SLEEP button repeatedly to select the number of minutes. First the Off option appears on the screen, followed by the following Sleep Time options : 0, 0, 0, 60, 90, 0, 80, and 40 minutes. OK Q.VIEW VOL PR PAGE When the number of minutes you want is displayed on the screen, press the OK button. The timer begins to count down from the number of minutes selected. MUTE LIST 0 FAV To check the remaining minutes before the TV turns off, press the SLEEP button once. SIZE INDEX TIME? REVEAL I/II USB SLEEP 4 5 To cancel the Sleep Time, press the SLEEP button repeatedly to select Off. When you switch the set off, the set cancels the preset sleep time. TIME SETTING You can also set up the Sleep Time in the TIME menu. Clock : :-- -- Clock Off Off Time On Time Sleep Time Auto Sleep : Off : Off : Off : Off Off Time On Time Sleep Time Auto Sleep G 0 min 0 min 0 min 60 min 90 min 0 min 80 min 40 min 89

92 TIME SETTING AUTO SHUT-OFF SETTING If set to on and there is no input signal, the TV turns off automatically after 0 minutes. MODE D/A POWER TV VCR BRIGHT DVD RATIO TEXT INFO i GUIDE EXIT MENU SUBTITLE MARK OK Press the MENU button and then use D or E button to select the TIME menu. Clock : :-- -- Off Time : Off On Time : Off Sleep Time : Off Auto Sleep : Off Press the G button and then use D or E button to select Auto Sleep. TIME SETTING 4 Press the G button and then use D or E button to select On or Off. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. Clock Off Time TV will be automatically turned On Time off, in case of No Signal for 0 minutes. Sleep Time Auto Sleep G Off On 90

93 PARENTAL CONTROL / RATINGS SET PASSWORD & LOCK SYSTEM Setting up your Password Set up blocking schemes to block specific channels, ratings, and external viewing sources. A password is required to gain access to this menu. D/A POWER BRIGHT RATIO TEXT INFO i MODE TV VCR DVD GUIDE Press the MENU button and then use the D or E button to select the LOCK menu. Then, press the G button. EXIT MENU OK SUBTITLE MARK Enter the password as requested. The TV is set up with the initial password Enter Password Set Password Change the password by inputting a new password twice. After inputting the password, use the D or E button to choose Set Password. Lock System : Off Set Password Block Programme Parental Guidance Input Block Press the G button and then choose any 4 digits for your new password and enter the them on the New. As soon as the 4 digits are entered, reenter the same 4 digits on the Confirm. Then your changed password has been memorized. Lock System Set Password Block Programme Parental Guidance Input Block G New Confirm PARENTAL CONTROL / RATING Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.! NOTE G If you ever forget your password, key in 7, 7, 7, 7 on the remote control. 9

94 PARENTAL CONTROL /RATINGS Lock System D/A POWER BRIGHT MODE TV VCR DVD Enables or disables the blocking scheme you set up previously. RATIO TEXT INFO i GUIDE EXIT MENU SUBTITLE MARK OK After inputting the password, use the D or E button to choose Lock System. Lock System : Off Set Password Block Programme Parental Guidance Input Block Press the G button and then use the D or E to select On or Off. When you select, the Lock System is enable. PARENTAL CONTROL / RATING Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. Lock System Set Password Block Programme Parental Guidance Input Block G Off On 9

95 PROGRAMME BLOCKING Blocks any programmes that you do not want to watch or that you do not want your children to watch. MODE D/A POWER TV VCR BRIGHT DVD RATIO TEXT INFO i GUIDE EXIT MENU SUBTITLE MARK OK After inputting the password, use the D or E button to choose Block Programme. Lock System : Off Set Password Block Programme Parental Guidance Input Block Press the G button. You will now see a screen filled with channel numbers and a preview picture. Use D or E or F or G button to select a channel and then use the OK button to block or unblock it. Lock System 4 Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. Set Password Block Programme Parental Guidance Input Block G Selection ( G or ) leads you to the block programme screen. PARENTAL CONTROL / RATING 9

96 PARENTAL CONTROL /RATINGS PARENTAL GUIDANCE - In Digital Mode only Prevents children from watching certain children's TV programs, according to the ratings limit set. MODE D/A POWER TV VCR BRIGHT DVD RATIO TEXT INFO i GUIDE EXIT MENU SUBTITLE MARK OK After inputting the password, use the D or E button to choose Parental Guidance. Lock System : Off Set Password Block Programme Parental Guidance Input Block Press the G button and then use the D or E to select G, P G, M, M A, A V or R. G (General audiences) PG (Parental guidance suggested) M (Mature audiences) PARENTAL CONTROL / RATING MA (Mature adult audiences) AV (Adult audiences) R (Restricted) Blocking Off (Permits all programmes) Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. Lock System Set Password Block Programme Parental Guidance Input Block G Blocking off : permits all programmes G PG M MA AV R Blocking Off 94

97 EXTERNAL BLOCKING Enables you to select a source to block from the external source devices you have hooked up. MODE D/A POWER TV VCR BRIGHT DVD RATIO TEXT INFO i GUIDE EXIT MENU SUBTITLE MARK OK After inputting the password, use the D or E button to choose Input Block. Press the G button and then use the D or E to select a source. Lock System : Off Set Password Block Programme Parental Guidance Input Block Press the G button and then use the or to select On or Off on the each source. 4 Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. Lock System Set Password Block Programme Parental Guidance Input Block G AV AV Component Component RGB-PC HDMI HDMI HDMI On On Off On Off On Off Off PARENTAL CONTROL / RATING 95

98 TELETEXT * This feature is not available in all countries. - Teletext is a free service broadcast by some TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. - The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern methods allowing quick and easy selection of teletext information. Switch On/Off Press the TEXT button to switch to teletext. The initial page or last page appears on the screen. Two page numbers, TV station name, date and time are displayed on the screen headline. The first page number indicates your selection, while the second shows the current page displayed. Press the TEXT or EXIT button to switch off teletext. SIMPLE Text * This feature is not available in all countries. Page selection Enter the desired page number as a three digit number with the NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then re-enter the correct page number. The PR + or - button can be used to select the preceding or following page. TOP Text * This feature is not available in all countries. - The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field denotes the next group and the blue field indicates the next block. TELETEXT A Block / group / page selection With the BLUE button you can progress from block to block. Use the YELLOW button to proceed to the next group with automatic overflow to the next block. With the GREEN button you can proceed to the next existing page with automatic overflow to the next group. Alternatively the PR + button can be used. 4 The RED button permits to return to previous selection. Alternatively the PR- button can be used. A Direct page selection Corresponding to the SIMPLE teletext mode, you can select a page by entering it as a three digit number using the NUMBER buttons in TOP mode. 96

99 FASTEXT - The teletext pages are colour coded along the bottom of the screen and are selected by pressing the corresponding coloured button. A Page selection. Press the i button to select the index page.. You can select the pages which are colour coded along the bottom line with the same coloured buttons.. Corresponding to the SIMPLE teletext mode, you can select a page by entering its three digit page number with the NUMBER buttons in FASTEXT mode. 4. The PR + or - button can be used to select the preceding or following page. Special Teletext Functions? REVEAL Press this button to display concealed information, such as solutions of riddles or puzzles. Press this button again to remove the information from the display. TIME When viewing a TV programme, press this button to display the time at the top right hand corner of the screen. Press this button again to remove the display. SIZE Selects double height text. Press this button to enlarge the top half of the page. Press this button again to enlarge the bottom half of the page. Press this button again to return to the normal display. i INDEX Select the each index page TELETEXT 97

100 APPENDIX TROUBLESHOOTING The operation does not work normally. The remote control doesn t work Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV. Ensure that the batteries are installed with correct polarity (+ to +, - to -). Ensure that the correct remote operating mode is set: TV, VCR etc. Install new batteries. Power is suddenly turned off Is the sleep timer set? Check the power control settings. Power interrupted. No broadcast on station tuned with Auto off activated. The video function does not work. Check whether the product is turned on. Try another channel. The problem may be with the broadcast. No picture & No sound Is the power cord inserted into wall power outlet? Check your antenna direction and/or location. Test the wall power outlet, plug another product s power cord into the outlet where the product s power cord was plugged in. Picture appears slowly after switching on This is normal, the image is muted during the product startups process. Please contact your service center, if the picture has not appeared after five minutes. APPENDIX No or poor colour or poor picture Horizontal/vertical bars or picture shaking Poor reception on some channels Adjust Colour in menu option. Keep a sufficient distance between the product and the VCR. Try another channel. The problem may be with the broadcast. Are the video cables installed properly? Activate any function to restore the brightness of the picture. Check for local interference such as an electrical appliance or power tool. Station or cable product experiencing problems, tune to another station. Station signal is weak, reorient antenna to receive weaker station. Check for sources of possible interference. Lines or streaks in pictures Check antenna (Change the direction of the antenna). 98

101 The audio function does not work. Picture OK & No sound No output from one of the speakers Unusual sound from inside the product Press the VOL or VOLUME button. Sound muted? Press MUTE button. Try another channel. The problem may be with the broadcast. Are the audio cables installed properly? Adjust Balance in menu option. A change in ambient humidity or temperature may result in an unusual noise when the product is turned on or off and does not indicate a fault with the product. There is a problem in PC mode. (Only PC mode applied) The signal is out of range (Invalid format) Adjust resolution, horizontal frequency, or vertical frequency. Check the input source. Vertical bar or stripe on background & Horizontal Noise & Incorrect position Work the Auto configure or adjust clock, phase, or H/V position. (Option) Screen colour is unstable or single colour Check the signal cable. Reinstall the PC video card. APPENDIX 99

102 APPENDIX MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen Here s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it s almost dry, and then use it to wipe the screen. Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV. Cleaning the Cabinet To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. Please be sure not to use a wet cloth. Extended Absence CAUTION If you expect to leave your TV dormant for a long time (such as a vacation), it s a good idea to unplug the power cord to protect against possible damage from lightning or power surges. APPENDIX 00

103 PRODUCT SPECIFICATIONS LB9D* LB9D-AD Dimensions (Width x Height x Depth) with stand without stand.7x4.4x. inches 805.8x69.7x8.9 mm.7x.8x. inches 805.8x554.x79.0 mm Weight with stand without stand.6 pounds / 4.8kg 7.8 pounds /.6kg Power requirement AC00-40V~ 50/60Hz.5A 4LB9DF* 4LB9DF-AD Dimensions (Width x Height x Depth) with stand without stand 40.6x0.7x. inches 00.8x779.8x. mm 40.6x7.x.5 inches 00.8x69x88.5 mm Weight with stand without stand 60. pounds / 7.kg 5.6 pounds /.4kg Power requirement AC00-40V~ 50/60Hz.5A 47LB9DF* 47LB9DF-AD Dimensions (Width x Height x Depth) with stand without stand 45.x.8x5.0 inches 50x858.7x80. mm 45.x0.x4. inches 50x767.8x0.0 mm Weight with stand without stand 8. pounds / 7.8kg 70. pounds /.8kg Power requirement AC00-40V~ 50/60Hz.0A 5LB9DF* 5LB9DF-AD Dimensions (Width x Height x Depth) with stand without stand 50.7 x 7.4 x 6.6 inches 89.0 x x 4.0 mm 50.7 x.8 x 4.4 inches 89.0 x x.0 mm Weight Power requirement Television System Program Coverage External Antenna Impedance with stand without stand 08.5 pounds / 49.kg 88.6 pounds / 40.kg AC00-40V~ 50/60Hz.5A PAL B/G, DVB-T VHF 0-, UHF 0-75, CATV 0-44, DTV 06-, Ω APPENDIX Environment condition Operating Temperature Operating Humidity Storage Temperature Storage Humidity The specifications shown above may be changed without prior notice for quality improvement. ~04 F (0 ~ 40 C) Less than 80% -4~04 F(-0 ~ 60 C) Less than 85% 0

104 APPENDIX 50PYDF* 50PYDF-AA Dimensions (Width x Height x Depth) with stand without stand 5.5x5.0x4.6 inches 60.0x887.0x70.0 mm 5.5x.4x.8 inches 60.0x8.8x95.5 mm Weight with stand without stand 6.8 pounds / 57.5kg 07.0 pounds / 48.5kg Power requirement AC00-40V~ 50/60Hz 4.9A 60PYDF* 60PYDF-AA Dimensions (Width x Height x Depth) with stand without stand 6.5x40.8x7.8 inches 6.6x06.8x45.0 mm 6.5x8.x.9 inches 6.6x970.0x98.5 mm Weight with stand without stand 78.6 pounds / 8.0kg 4. pounds / 65.0kg Power requirement AC00-40V~ 50/60Hz 6.5A Television System External Antenna Impedance Environment condition Operating Temperature Operating Humidity Storage Temperature Storage Humidity PAL B/G, DVB-T VHF 0-, UHF 0-75, CATV 0-44, DTV 06-, Ω ~04 F (0 ~ 40 C) Less than 80% -4~04 F(-0 ~ 60 C) Less than 85% The specifications shown above may be changed without prior notice for quality improvement. APPENDIX 0

105 4PB4D* 4PB4D-AA Dimensions (Width x Height x Depth) with stand without stand 44.5x0.x. inches 0x768.05x0.8 mm 44.5x8.x. inches 0x75x85 mm Weight with stand without stand 65.6 pounds / 9.74kg 58 pounds / 6.4kg Power requirement AC00-40V~ 50/60Hz.5A 50PB4D* 50PB4D-AA Dimensions (Width x Height x Depth) with stand without stand 5.5x5.7x4.6 inches 08x906.x70 mm 5.5x.x.5 inches 08x845x88.9 mm Weight with stand without stand 88. pounds / 40kg 8. pounds / 7.kg Power requirement AC00-40V~ 50/60Hz 4.5A Television System Program Coverage External Antenna Impedance Environment condition Operating Temperature Operating Humidity Storage Temperature Storage Humidity PAL B/G, DVB-T VHF 0-, UHF 0-75, CATV 0-44, DTV 06-, Ω ~04 F (0 ~ 40 C) Less than 80% -4~04 F(-0 ~ 60 C) Less than 85% The specifications shown above may be changed without prior notice for quality improvement. APPENDIX 0

106 APPENDIX PROGRAMMING THE REMOTE CONTROL The remote is a multi-brand or a universal remote. It can be programmed to operate most remote-controllable devices of other manufacturers. Note that the remote may not control all models of other brands. Programming a code into a remote mode 4 5 To find out whether your remote control can operate each device without programming, turn on the device (such as a VCR) and press the corresponding mode button on the remote. After that, press the POWER button. If the device is turned off and it responds properly the remote control need not be programmed. If not, the remote should be programmed to operate the device. The programming procedures are explained below. Press the MENU and MUTE button continuously at the same time for two seconds; the currently selected device button is illuminated. If you don't press any button for 0 seconds, the light on the mode button will be turned off. In that case, you have to repeat from step. Enter the appropriate code from the code table on the following pages. When pressing the button, the light blinks at a time. If the device turned off, the programming is successful. Press the MENU button to store the code. After blinking twice, this code is stored. Test the remote control functions to see if the device responds properly. If not, steps -5. APPENDIX 04

107 Remote control code VCRs Brand Codes Brand Codes Brand Codes AIWA 04 AKAI AMPRO 07 ANAM AUDIO DYNAMICS BROKSONIC CANON CAPEHART 08 CRAIG CURTIS MATHES DAEWOO DAYTRON 08 DBX DYNATECH ELECTROHOME 059 EMERSON FISHER FUNAI 04 GE GO VIDEO 6 HARMAN KARDON HITACHI INSTANTREPLAY 0 0 JCL 0 0 JCPENNY JENSEN 04 JVC KENWOOD LG (GOLDSTAR) LLOYD 04 LXI MAGIN 040 MAGNAVOX MARANTZ 069 MARTA 0 MATSUI MEI 0 0 MEMOREX MGA MINOLTA 0 00 MITSUBISHI MTC MULTITECH NEC NORDMENDE 04 OPTONICA PANASONIC PENTAX PHILCO PHILIPS PILOT 0 PIONEER PORTLAND 08 PULSAR 07 QUARTZ 0 04 QUASAR RCA REALISTIC RICO 058 RUNCO 48 SALORA 04 SAMSUNG SANSUI SANYO SCOTT SEARS SHARP SHINTOM 04 SONY SOUNDESIGN 04 STS 0 SYLVANIA SYMPHONIC 04 TANDY TATUNG TEAC TECHNICS TEKNIKA THOMAS 04 TMK 006 TOSHIBA TOTEVISION UNITECH 040 VECTOR RESEARCH 0 VICTOR 048 VIDEO CONCEPTS VIDEOSONIC 040 WARDS YAMAHA ZENITH APPENDIX 05

108 APPENDIX VCRs Brand Codes Brand Codes Brand Codes ABC AJIN ANTRONIK 04 ARCHER CABLE STAR 06 CENTURION 09 CENTURY 007 CITIZEN 007 COLOUR VOICE COMBANO COMTRONICS DIAMOND 0 EAGLE EASTERN ELECTRICORD 0 GE 07 GEMINI GI GOLDEN CHANNEL 00 HAMLIN HITACHI HOSPITALITY JERROLD LG (GOLDSTAR) M-NET 07 MACOM 0 MAGNAVOX MEMOREX 00 MOVIE TIME 08 0 NSC OAK PANASONIC PARAGON 00 PHILIPS PIONEER POST NEWS WEEK06 PRUCER 059 PTS PULSAR 00 RCA 047 REGAL REGENCY 057 REMBRANT 05 SAMSUNG SCIENTIFIC ATLANTA SHERITECH 0 SIGNAL 00 SIGNATURE 05 SL MARX 00 SPRUCER STARCOM STARGATE TADIRAN 00 TAEKWANG 0 TAIHAN 05 TANDY 07 TEXSCAN 09 TOCOM TOSHIBA 00 UNIKA UNITED CABLE UNIVERSAL VIEWSTAR ZENITH APPENDIX DVD Brand Codes Brand Codes Brand Codes APEX DIGITAL 0 DENON GE HARMAN KARDON 07 JVC 0 LG MAGNAVOX 0 MARANTZ 04 MITSUBISHI 00 NAD 0 ONKYO PANASONIC PHILIPS 0 PIONEER PROCEED 0 PROSCAN RCA SAMSUNG 0 05 SONY 007 THOMPSON TOSHIBA YAMAHA ZENITH

109 IR CODES. How to Connect Connect your wired remote control to the Remote Control port on the TV.. Remote Control IR Codes Output waveform Single pulse, modulated with 7.97KHz signal at 455KHz T Tc Carrier frequency FCAR = /TC = fosc/ Duty ratio = T/TC = / Configuration of frame st frame Lead code Low custom code High custom code Data code Data code C0 C C C C4 C5 C6 C7 D0 D D D D4 D5 D6 D7 Repeat frame Repeat code Tf Lead code 9 ms 4.5 ms Repeat code 0.55 ms 9 ms.5 ms Bit description Bit 0 Bit APPENDIX 0.56 ms 0.56 ms. ms Frame interval: Tf The waveform is transmitted as long as a key is depressed..4 ms Tf Tf 07

110 APPENDIX Code (Hexa) Function Note 50 D/A Remote control Button 0B Remote control Button 79 RATIO Remote control Button 0E SLEEP Remote control Button 0-9 Number Key 0-9 Remote control Button A Q.VIEW Remote control Button 09 MUTE Remote control Button 0 VOL + Remote control Button 0 VOL - Remote control Button 00 PR + Remote control Button 0 PR - Remote control Button E FAV Remote control Button 40 D Remote control Button 4 E Remote control Button 07 F Remote control Button 06 G Remote control Button 44 OK Remote control Button 4 MENU Remote control Button 5B EXIT Remote control Button A9 GUIDE Remote control Button 7E Remote control Button 9 SUBTITLE Remote control Button 08 POWER Remote control Button 7D MARK Remote control Button Code (Hexa) Function Note 64 SIZE Remote control Button 70 INDEX Remote control Button 6 TIME Remote control Button A REVEAL Remote control Button 0 TEXT Remote control Button 7 RED Remote control Button 7 GREEN Remote control Button 6 YELLOW Remote control Button 6 BLUE Remote control Button 5 LIST Remote control Button 0A I/ II Remote control Button AA INFO Remote control Button E Remote control Button E0 Remote control Button B Remote control Button B0 Remote control Button BA Remote control Button BD Remote control Button B Remote control Button 8F Remote control Button 8E Remote control Button B Remote control Button CA USBD Remote control Button 7C Remote control Button APPENDIX 08

111 AV IN AV OUT EXTERNAL CONTROL THROUGH RS-C Connect the RS-C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product s functions externally. Connect the serial port of the control device to the RS-C jack on the product back panel. Note: RS-C connection cables are not supplied with the product. RS-C Setup VIDEO COMPONENT IN RS-C IN (CONTROL & SERVICE) AUDIO VIDEO AUDIO S-VIDEO VIDEO ( MONO) AUDIO PC Type of Connector; D-Sub 9-Pin Male No. Pin Name No connection RXD (Receive data) TXD (Transmit data) 4 DTR (DTE side ready) 5 GND 6 DSR (DCE side ready) 7 RTS (Ready to send) 8 CTS (Clear to send) 9 No Connection APPENDIX 09

112 APPENDIX RS-C Configurations 7-Wire Configurations (Standard RS-C cable) -Wire Configurations(Not standard) PC PDP PC PDP RXD TXD TXD RXD GND 5 5 GND DTR 4 6 DSR DSR 6 4 DTR RTS 7 8 CTS CTS 8 7 RTS D-Sub 9 D-Sub 9 RXD TXD TXD RXD GND 5 5 GND DTR 4 6 DTR DSR 6 4 DSR RTS 7 7 RTS CTS 8 8 CTS D-Sub 9 D-Sub 9 Set ID Use this function to specify a TV ID number. Refer to Real Data Mapping. p. Press the MENU button and then use D or E button to select the OPTION menu. Press the G button and then use D or E button to select Set ID. Subtitle : Off Input Label : Off Key Lock : Off Set ID : ISM Method Low Power Front Display Factory Reset Model Info APPENDIX 4 Press the G button and then use D or E button to adjust Set ID to choose the desired TV ID number. The adjustment range of Set ID is ~99. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. Subtitle Input Label Key Lock Set ID ISM Method Low Power Front Display Factory Reset Model Info G Communication Parameters Baud rate : 9600 bps (UART) Data length : 8 bits Parity : None Stop bit : bit Communication code : ASCII code Use a crossed (reverse) cable. 0