luxcontrol lighting control system DALI actuator DALI PCD one4all G2 Leading-edge/trailing-edge phase dimmer
|
|
- Samuel Ramsey
- 5 years ago
- Views:
Transcription
1 luxcotro lighting ctrol system DAI PCD eading-edge/trailing-edge phase dimmer Product descripti Digital leading-edge and trailing edge phase dimmers Total cnected load: e4all input: DAI, DSI, and corridorfuctio input 1 dimmed phase (output) With automatic load detecti Surface-mounted casing Suitable for operati with ED retrofit bulbs 5-year guarantee È Standards, page 3 Wiring diagrams and installati examples, page 3 1
2 luxcotro lighting ctrol system DAI PCD eading-edge/trailing-edge phase dimmer Technical data Rated supply voltage V Mains frequency 50 / 60 Hz Cnected load Power loss 0.4 W (1.5 W at full load) Ambient temperature ta C Type of protecti IP20 Ordering data Type Article number Packaging, cart Weight per pc. DAI-PCD pc(s) kg Specific technical data Type Inputs Outputs Terminals Input, DAI / DSI ctrol input / and corridorfuctio Current draw umber of DAI addresses Dimmed phase Ctrol range, DSI Ctrol range, DAI DAI-PCD ma from DAI % % mm² 2
3 luxcotro lighting ctrol system 1. Standards E E E E E According to E Ed. 2 According to E Ed. 2 According to E Comm Phase dimmers with automatic load detecti, leading-edge or trailing-edge. Ctrolled via switches ( and corridorfuctio) or a DAI/DSI signal. Total cnected load: VA 2.1 Area of applicati Digital phase dimmers enable low-voltage tungsten-halogen lamps, in cjuncti with electric or magnetic transformers, and ohmic light sources (incandescent lamps) with a total output of 1 to 300 VA to be dimmed. Ctrol is either via a DAI/DSI signal or directly cnected switches ( and corridorfuctio). The digital phase dimmer is compatible with ED retrofit lamps. Because of the variety of different ED Retrofit lamps it is recommended to test the operati before installati. V halogen ED retrofit lamps that are operated by an electric or magnetic transformer are also compatible. 3. Installati 3.1 Wiring V AC 50 / 60 Hz corridorfuctio Incandescent lamps, ED retrofit lamps corridorfuctio V tungstenhalogen lamps, ED retrofit lamps electric transformator corridorfuctio V tungstenhalogen lamps, ED retrofit lamps magnetic transformator DAI PCD DAI PCD DAI PCD DAI/DSI Mixed loads (capacitative, inductive and ohmic) may be used. 1) 1) Different loads require different ctrol signals by the dimmer. If various loads are operated simultaneously at the dimmer, e.g. electric transformers, magnetic transformers, ED retrofit lamps, etc., the dimming signal will focus the most dominant load. As a result, the other loads may be operated by wrg ctrol signals, which will result in improper dimming. In this case, a decrease in the service life of the loads installed cannot be excluded either. It is therefore recommended to avoid ctrolling different loads simultaneously by the same dimmer. Informati minimum dimming level The PCD supports in general a min. dimming level of 1 % for DSI and 0.1 % for DAI. But not every load supports such low levels. For that reas the minimum dimming level is not a static value and is calculated for every load new. 3
4 luxcotro lighting ctrol system 3.2 Wiring type and cross secti The wiring can be in stranded wires with ferrules or solid. For perfect functi of the cage clamp terminals the strip length should be 4 5 mm for the input terminal. The max. torque at the clamping screw (M3) is 0.2 m. Side D2 max. = 8,0 mm min. = 4,0 mm Side D1 max. = 6,0 mm min. = 2,0 mm To get a proper working strain relief it is recommended that the cable jacket diameter of the side D2 is 2 mm bigger than the diameter of the side D1. (This can vary if the used cable jacket material varies from side D2 to D1 in pinching property). PRESS and corridorfuctio are very simple tools for ctrolling gears with cvential pushbutts or moti sensors. To ensure correct operati a sinusoidal mains voltage with a frequency of 50 or 60 Hz is required at the ctrol input. Special attenti must be paid to achieving clear zero crossings. Serious mains faults may impair the operati of and corridorfuctio. 4.3 When a new unit is installed in an existing system or when the system is first put into operati the individual units are not synchrised. This means that some units will be at status and some at status. Pressing the switch briefly will change the status; units previously will be switched, but the rest will be switched. By pressing the switch for lger than 10 secds all the units will be synchrised to the same status. The synchrisati process is completed when all the lamps have assumed the same light value (50 %). The same synchrisati process may also be necessary during normal operati if an individual unit becomes unsynchrised because of an incorrect switching operati. is a very simple tool for ctrolling ballasts with cvential momentary-acti switches or moti sensors. To ensure correct operati a sinusoidal mains voltage with a frequency of 50 or 60 Hz is required at the ctrol input. Special attenti must be paid to achieving clear zero crossings. Serious mains faults may impair the operati of. D1 4. Functis 4.1 Ctrol input (DA/, DA/) D2 4.4 Automatic load measurement In default setting the PCD does an automatic load measurement after every mains interrupti. This guaranties ideal load ctrol. The automatic load measurement can be disabled via the Software mastercofigurator or with the reset switch. If the PO (Power On evel) is set to 0, and the PCD has experienced a mains interrupti, the load measurement will be executed after a DAI command > 0 is send to the PCD and not directly after mains is switched back. Digital DAI signal or can be wired the same terminals (DA/ and DA/). The ctrol input is n-polar for digital ctrol signals (DAI, DSI). The ctrol signal is not SEV. Ctrol cable has to be installed in accordance to the requirements of low voltage installatis. Different functis depending each module. 4.2 corridorfuctio The corridorfuctio can be programmed in two different ways. To program the corridorfuctio by means of software a DAI-USB interface is needed in combinati with a DAI PS. The software can be the mastercofigurator. To activate the corridorfuctio without using software a voltage of 230 V has to be applied for five minutes at the cnecti. The unit will then switch automatically to the corridorfuctio. If the corridorfuctio is wrgly activated in a system (for example a switch is used instead of pushbutt), there is the opti of installing a pushbutt and deactivating the corridorfuctio mode by five short pushes of the butt within three secds. 4
5 luxcotro lighting ctrol system 4.5 Display of load factor After every automatic load measurement, the amount of possible cnectable loads will be indicated by the indicati ED for 2 minutes. Example for 2 loads 400 ms 2 2 Example for 23 loads ms 2 3 Example for 10 loads 100 ms ms 1 0 Values up to 99 can be displayed. 0 will be indicated with the ED switched for 100 ms. 1 9 will be indicated with the ED blinking,. Break between digits = 1. Break between full numbers = 400 ms. 4.6 Reset switch The reset switch is located between the DAI and Mains terminals. By operating the reset switch a new load measurement can be executed. After this measurement the PM (Physical Minimum evel) will be changed and the automatic load measurement will be deactivated. In additi in the secd phase the PCD can be reset to factory settings. The automatic load measurement is active in the factory settings. ED Time Phase 1 Phase 2 2 s 2 s 5 s 30 s Release switch in Phase 1 = oad measurement will be executed, the PHM will be changed accordingly to the measurement result. Automatic load measurement will be deactivated. Release switch in Phase 2 = The PCD will be reset to factory settings. Automatic load measurement will be activated again and executed after every mains interrupti. Important the switch has to be released within the 2 secd window in which the indicati ED is switched. The executi of Phase 1 and 2 will be visualized by a sequence of the indicati ED. The sequence will start 5 secds after the phase during witch the switch was released. Example triggering Phase 1: ED Phase 1 2 s 1 s 1 s 1 s Time Switch select release 5 s 5 s 5. Miscellaneous 5.1 Additial informati Additial technical informati at Technical Data Guarantee cditis at Services ife-time declaratis are informative and represent no warranty claim. o warranty if device was opened. 5
luxcontrol lighting control system DALI actuator DALI PCD one4all G2 Leading-edge/trailing-edge phase dimmer
DAI PCD 1-300 eading-edge/trailing-edge phase dimmer Product descripti Digital leading-edge and trailing edge phase dimmers Total cnected load: e4all input: DAI, DSI and input 1 dimmed phase (output) With
More informationLED Driver Compact dimming
Driver CA 15W 180-350mA flexc PH-C SR ADV ADVACED series Product description Dimmable constant current ED Driver (SEV) Independent ED Driver with cable clamps Selectable output current between 180, 250
More informationLED control gear Compact dimming. Uconverter LCAI 2x38 W 0500 K013 one4all ECO series. Ordering data
Product description Dimmable built-in for LED Constant current (with 2 adjustable output channels) Designed for outdoor and street luminaire Output power 2 x 38 W Suitable for mains voltage peaks (burst/surge)
More informationFig. 1. Fig. 3. Ordering data. Fig. Mounting
-SMART PTM Abient light sensor and presence detector for cstant light ctrol Product descripti Abient light sensor with oti detector Switch input for / switching and diing different casing versis For or
More informationOrdering data. Type Inputs Outputs Dimming switch Motion sensor DSI signal2 Digital control line DSI Control output per physical output (devices)
luxcotro lighting control system Control module for amplifying signals Product description Multi-functional controller For amplifying the signal for a maximum of 50 devices or for cascading long lines
More informationOUT. HID control gear Electronic. PCIS, PCI, PCS outdoor DIM B011 PCI outdoor
Product description Pulse packets for increased ignition energy (pulsecotro technology) Flicker-free light Colour stability thanks to constant power o acoustic resonance Safety shutdown if a lamp is faulty
More informationLED Driver Compact dimming
Driver LCA 17W 250 700mA one4all C PRE PREMIUM series Product description Dimmable built-in constant current LED Driver Adjustable output current between 250 and 700 ma via ready2mains Programmer, I-select
More informationLED Driver Compact dimming
Driver LCA 45W 500 1400mA one4all C PRE PREMIUM series Product description Dimmable built-in constant current LED Driver Adjustable output current between 500 and 1,400 ma via ready2mains Programmer, I-select
More informationHID control gear Electronic
HS HI S,, PCS outdoor DIM chronostep outdoor Product description Pulse packets for increased ignition energy (pulsecotro technology) Flicker-free light Colour stability thanks to constant power o acoustic
More informationLuminaire installation box Surface-mounted box Ceiling installation box
-Smart PTM Ambient light sensor and motion detector for constant lighting control uminaire installation box Surface-mounted box Ceiling installation box Overview: -SMART PTM i is an ambient light sensor,
More informationEmergency lighting units EM powerled
CE CPS 12/15 W ED Driver for AC and DC power supplies Product description ED Driver for mains operation with integrated Simple CORRIDOR FUCTIO (CF) For use in central battery systems For luminaire installation
More informationSystem 27 NOVA. Modular Electronic Humidity Control System. Feature and Benefits
PSC9717 European Refrigerati Ctrols Catalogue Catalog Secti 2 Product Bulletin W27 System 27 NOVA Modular Electric Humidity Ctrol System Introducti System 27 NOVA is a family of modular electric modules
More informationPHASED OUT. HID control gear Electronic. PCIS, PCI, PCS outdoor DIM chronostep PCI outdoor
Product description Pulse packets for increased ignition energy (pulsecotro technology) Flicker-free light Colour stability thanks to constant power o acoustic resonance Safety shutdown if a lamp is faulty
More informationFigure 1: Device components
Order No. : 2860 10 Order No. : 2830 10 Operation- and Assembly Instructions 1 Safety instructions Electrical equipment may only be installed and fitted by electrically skilled persons. Failure to observe
More informationHID control gear Electronic. PCIS, PCS outdoor FOX B011 PCI outdoor. Ordering data. Circuit power1. tc/ta for 60,000 h For luminaires with 1 lamp
Product description Pulse packets for increased ignition energy (pulsecontrol technology) Flicker-free light Colour stability thanks to constant power No acoustic resonance Safety shutdown if a lamp is
More informationLED Driver Constant voltage
Driver LCA 150W 24V one4all SC PRE PREMIUM series Product description Dimmable 24 V constant voltage LED Driver for flexible constant voltage strips One4all interface and ready2mains enable different dimming
More informationLED Driver Compact dimming
Driver LCA 120W 350 1050mA one4all C PRE OTD PREMIUM Outdoor series Product description Dimmable built-in constant current LED Driver Output current adjustable between 350 1,050 ma via ready2mains Programmer,
More informationLED Driver Linear / area dimming. Driver LCAI 38/75W TW lp Tunable White
Driver LCAI 38/75W TW lp Tunable White Product description 2-channel LED Driver with LI DT8 Output power: 38 W or 75 W Power input on standby < 0.3 W Nominal life-time up to 50,000 h 5-year guarantee Properties
More informationLED Driver Compact dimming
Driver LCA 17W 250 700mA one4all SC PRE PREMIUM series Product description Dimmable built-in constant current LED Driver Can be either used build-in or independent with clip-on strain-relief (see accessory)
More informationDALI TOUCHPANEL BASIC TW. Operating and control unit
BASIC Operating and control unit Product description Capacitive Touchpanel High-quality appearance with real glass display Multiple control modules are possible in a system Power supply via line Double
More informationLED control gear Compact fixed output
Driver LC 40W 900mA fixc SR SNC ESSENCE series Product description Independent fixed output LED Driver Constant current LED Driver Output current 900 ma Max. output power 39 W Nominal life-time up to 50,000
More informationLED Driver Linear / area dimming
Driver LCA 75W 350 1050mA one4all lp PRE PREMIUM series Product description Dimmable built-in constant current LED Driver Adjustable output current between 350 and 1,050 ma via ready2mains Programmer,
More informationEmergency lighting units EM powerled
E 15 W CE CPS ED Driver for AC and DC power supplies Product description ED Driver for mains operation with integrated Simple CORRIDOR FUCTIO (CF) For use in central battery systems For luminaire installation
More information15 Series - Dimmer
Features Master slave system for multiple load dimming Suitable for incandescent and halogen lighting loads (with or without transformer or electronic supply) Compatible with energy saving (CF or ED) dimmable
More informationDescription. System 27 NOVA. Modular Electronic Temperature Control System. Feature and Benefits
PSC9717 European Refrigerati Ctrols Catalogue Catalog Secti 2 Product Bulletin A27 System 27 NOVA Modular Electric Temperature Ctrol System Introducti System 27 NOVA is a family of modern modular electric
More informationMosaic TM Dimmer 3 x 1000 W
Mosaic TM Dimmer 3 x 1000 W 784 30 Technical characteristics (1) ( * ) 50/60 Hz 240 V~ 100 V~ 1 x 2,5 mm2 2 x 1,5 mm 2 Max. Min. Max. Min. < 2200 W (2) (do not exceed 1000 W per channel) 3 x 40 W < 1100
More informationLED control gear Compact fixed output. Uconverter LCI 55 W 1400 ma O010 TOP series Ø4,4. Ordering data
Product description 1-channel for indoor use Inbuilt for luminaires of protection class I Output current and output voltage adjustable FA output 12 V TC input channel ominal life of 50,000 h (at ta max.
More informationSystem 2000 System 2000 HLK relay insert. 1 Safety instructions. 2 Device components. 3 Function. Order No. : Operating instructions
Order No. : 0303 00 Operating instructions 1 Safety instructions Electrical equipment may only be installed and fitted by electrically skilled persons. Failure to observe the instructions may cause damage
More informationArteorTM Dimmer 3 x 1000 W / /60
ArteorTM Dimmer 3 x 1000 W / 5740 10/60 Technical characteristics / * ( ) 50/60 Hz 1 x 2.5 mm 2 x 1.5 mm2 2 Max. < 2200 W(2) (do not exceed 1000 W per channel / Special provisions (see page 5) / 240 V~
More informationDimmers SЕRIES. Kitchen light control. Bedroom light control. Living room light control
Kitchen light control Bedroom light control 15 SЕRES iving room light control ighting control in corridors (for hotels, offices and hospitals) FDER reserves the right to alter characteristics at any time
More informationDimming actuators GDA-4K KNX GDA-8K KNX
Dimming actuators GDA-4K KNX GDA-8K KNX GDA-4K KNX 108394 GDA-8K KNX 108395 Updated: May-17 (Subject to changes) Page 1 of 67 Contents 1 FUNCTIONAL CHARACTERISTICS... 4 1.1 OPERATION... 5 2 TECHNICAL DATA...
More informationLED Driver Linear / area fixed output
Driver LC 10W 350mA fixc lp SNC2 ESSENCE series Product description Fixed output built-in LED Driver Constant current LED Driver Output current 350 ma Max. output power 10.2 W Up to 80 % efficiency For
More informationPHASED OUT. Control module with 3 channels/single, twin push to make switches/ presence detector/modulardim power supply
For DI rail luxcotro modulardim Control module with channels/single, twin push to make switches/ presence detector/modulardim power supply The control module is the basis of the modulardim product range.
More informationPHASED OUT. LED control gear Compact fixed output. Driver LC 40W 900mA fixc C SNC China Domestic ESSENCE series
Product description Fixed output built-in LED Driver Constant current LED Driver Output current 900 ma Max. output power 40 W Nominal life-time up to 30,000 h For luminaires of protection class I and protection
More informationQSNE-4S5-230-D V~ 50 / 60 Hz 16 A. Dimming Power Module CCI. Option Def. Input. H Opt1. Hi Temp Prog Power
800 W ax 500 W ax 500 W ax 500 W ax Zone 1 Zone 2 Zone 3 Zone 4 Option Def H Opt1 Opt2 Opt3 230 V~ 50 / 60 Hz 10 A www. H H G G Switching Power odule The DI Power odule (DP) family is a group of modular
More informationLED Driver Compact fixed output
Driver LC 40W 900mA fixc C SNC ESSENCE series Product description Fixed output built-in LED Driver Constant current LED Driver Output current 900 ma Max. output power 40 W Nominal life-time up to 50,000
More information4.0 Description. 2-channel operation D1 and D2 rated at 200 VA each. 1-channel operation D1 rated at 400 VA (see connection chap. 6.
_307 238_EN_LUXOR 405_310 410 01_D.qxd 21.09.16 10:54 Seite 1 Operating Manual Dimmer module 4050100 1.0 Designated use The LUXOR dimmer module expands the existing LUXOR series of devices. It switches
More informationLED Driver Compact fixed output
Driver LC 10W 250mA fixc R ADV ADV series Product description Fixed output built-in LED Driver Constant current LED Driver Output current 250 ma For luminaires of protection class II For ambient temperatures
More informationINSTALLATION & USER GUIDE
INSTALLATION & USER GUIDE Digidim 458 8-Channel Dimmer STEP 1 Assemble Dimmer Unit STEP 2 Mount Dimmer Chassis STEP 3 Electrical Installation STEP 4 Attach Module and Make Connections STEP 5 Replace Cover
More informationLED Driver Compact fixed output
Driver LC 45W 1050mA fixc C SNC ESSENCE series Product description Fixed output built-in LED Driver Constant current LED Driver Output current 1,050 ma output power 45 W Nominal life-time up to 50,000
More informationDimming actuators of the FIX series DM 4-2 T, DM 8-2 T
Dimming actuators of the FIX series DM 4-2 T, DM 8-2 T DM 4-2 T 4940280 DM 8-2 T 4940285 Updated: Jun-16 (Subject to change) Page 1 of 70 Contents 1 FUNCTIONAL CHARACTERISTICS... 4 1.1 OPERATION... 5 2
More informationOperating Instructions Dimmer for V Incandescent Lamps
Operating Instructions Incandescent Lamps 1. Safety instructions Attention: Electrical equipment must be installed and fitted only by qualified electricians and in observance of the current accident prevention
More informationGamma instabus. Technical product information
Gamma instabus Technical product information Universal dimmer N 554D31, 4 x 300 VA / 1x 1000 VA, AC 230 V Universal dimmer N 554D31 Control of dimmable lamps, including LED without minimum load Output
More information1 Safety instructions. 2 Device components. 3 Function. Light Management Relay switch insert 2-channel. Art.-No.: 1202 URE.
Art.-No.: 1202 URE Operationsmanual 1 Safety instructions Electrical equipment may only be installed and fitted by electrically skilled persons. Failure to observe the instructions may cause damage to
More informationABB i-bus EIB Universal dimmer 6155 EB for Installation
73-1 - 5975 23459 ABB i-bus EIB Universal dimmer 6155 EB - 101-500 for Installation Operating instructions only for authorized, skilled electricians with EIB training Important instructions Attention It
More information10 SERIES. Light dependent relays A
10 SERES 10 SERES Relays for automatic control of lighting according to the ambient light level ntegral light sensor For pole or wall mounting 10.32-2 O 16 A output contacts 10.41-1 O 16 A output contact
More informationInstallation and User Guide 458/CTR8 8-Channel Ballast Controller Module
Installation and User Guide 458/CTR8 8-Channel Ballast Controller Module Helvar Data is subject to change without notice. www.helvar.com i Contents Section Page Introduction 1 Installation 2 1. Attach
More informationAssembly. Front view. LEDs. Parametrization interface. Power Bus
otation Speed Monitor Features Assembly 1-channel signal conditioner 2 V DC supply Input for 2- or -wire sensors Input frequency 10 mhz... 50 khz elay contact output Start-up override and restart inhibit
More informationSwitching Power Module
Assembled in U.S.A. 5005757 Rev. A GCU-HOSP 243C ID. COT. EQ. IEC PEV /EC Class 2 +.800.523.9466 + 44.(0)20.7680.448 HomeWorks DI Power odule Switching Power odule The Switching Power odule family is a
More informationHYL-035D0850G103. Constant current LED driver DALI Dimmable. LED Driver. Product description. Benefits. Interfaces.
Constant current LED driver DALI Dimmable Product description Dimmable Independent constant current Adjustable output current between 350 and 1,050mA via DIP switch Max. output power 35 W Up to 88 % efficiency
More informationLED Driver Linear / area dimming industry. Driver LC 200W 1050mA UNV ADV IND ADVANCED series
Driver LC 200W 1050mA UNV ADV IND ADVANCED series Product description Independent constant current LED Driver For dry, damp and wet locations Max. output power 200 W Up to 93.7 % efficiency For luminaires
More informationLocation. Electrical. Loads. 2-wire mains-rated, 0.5 mm² to 1.5 mm² Max. length: 300 m (with 1.5 mm² cable). Example: Belden 8471.
Product Description Installation and User Guide Transistor Dimmer (454) The DIN rail mounted 454 is a fourchannel transistor dimmer that can operate in one of two modes: leading edge or trailing edge.
More informationManual for WMR-252 built-in receiver with universal dimmer
Manual for WMR-252 built-in receiver with universal dimmer A unique universal built-in wireless receiver with dimmer function for remotely controlling dimmable 230V LED bulbs, low-energy bulbs, incandescent
More informationDIN Power Module - Phase Adaptive
DIN Power Module ow Capacity Phase Adaptive DIN Power Module - Phase Adaptive 369849a 1 08.06.15 The Phase Adaptive Power Module family is a group of modular products for the control of lighting loads.
More informationUSER GUIDE for the. HES92020, HES92021, HES92220 & HES92221 DIMMER Modules
USER GUIDE for the HES92020, HES92021, HES92220 & HES92221 DIMMER Modules User Guide for the Imagine HES92020, HES92021, HES92220 & HES92221 DIMMER Modules Document I434B Issue 2 (21/08/02) Copyright 2002
More informationVSX41 Video Switcher Operation Manual
VSX Video Switcher Operati Manual Biamp Systems, 007 S.W. Arctic Drive, Beavert, Oreg 97005 U.S.A. (503) 6-787 http://www.biamp.com an affiliate of Rauland-Borg Corp. blank print update Dec 9/99 VSX TABLE
More informationModular pulse operated latching relay 16 A
87045 LIMOGES Cedex Telephone number: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 Modular pulse operated latc / 05 / 07 / 08 / 10 / 11 / 12 / 14 / 16 / 20 and 927 00 / 49 CONTENTS PAGES 1. Description,
More informationK-BUS Dimmer Module User manual-ver. 1
K-BUS Dimmer Module User manual-ver. 1 KA/D0103.1 KA/D0203.1 KA/D0403.1 Content 1. Introduction... 3 2. Technical Parameter... 3 3. Dimension and Connection Diagram... 4 3.1 KA/D0103.1... 4 3.2 KA/D0203.1...
More informationTri-level Control HF Sensor
Daylight Monitoring TM Ambient daylight threshold oop in oop out Tri-level Control HF Sensor HC403VRC-KD HC404VRC-KD Detached Version with Daylight Monitoring and Remote Control Applications Occupancy
More informationLED DRIVERS. LQC4D-V1 4 channels. User Manual FEATURES
pag. 1/13 FEATURES Outputs: 4 x channels BUS+SEQUENCER+FADER+DIMMER+DRIVER Input: DC 12/24/48 Vdc BUS Command: DALI LOCAL Command: 4x N.O. push button (with or without memory), 0-10V, 1-10V Controls: dimmer,
More informationEmergency lighting units EM INVERTER
EM IVERTER TC-DE TC-TE TC-F TC-DD Tc EM MII BAIC, 0 0 V 0/0 Hz BAIC version roduct description Emergency lighting supply unit f manual testing F compact fluescent lamps mall dimensions ( x 0 mm cross-section,
More informationF90 Series (Rate Indicators / Controllers) INSTRUCTION MANUAL
F90 Series (Rate Indicators / Controllers) INSTRUCTI MANUAL FEATURES DIN 48 9mm DIN 48 9mm Standard Panel Size Monitor & Preset Type 1 Monitor type with the large display 2 Preset Type can make the upper/lower
More informationE R A I GATE OPENERS DEPARTMENT
S E R A I GATE OPENERS DEPARTMENT INSTALLATI OF THE CTROL PANEL CR/41 WHERE PLACING THE CTROL PANEL Place the device near the gate, in order to have the minimum lenght of the cables for connection with
More informationT5, T8, TC-L. PC T5 PRO lp W V 50/60/0 Hz, HO. Electronic ballasts Linear lamps T5, T8 and compact lamps TC-L
T, T8, TC-L Electronic ballasts PC T PRO lp 80 W 0 0 V 0/0/0 Hz, HO L D,1 0, 1 side fixing feature side fixing feature ø,1 defined lamp warm start is 1. s constant light output independent of fluctuations
More informationSensor module. Safety instructions. Function Correct use. Product characteristics. Structure of the device. Operation. Ref.No.
Sensor module Ref.No.: SM 1608 V03 Safety instructions Caution! Electrical devices may only be installed and fitted by electrically skilled persons. Non-compliance with the installation information could
More informationHYL-080D1750G358. Constant current LED driver DALI Dimmable. LED Driver. Product description. Benefits. Interfaces.
Linear / area dimming Constant current LED driver DALI Dimmable Product description Dimmable built-in constant current LED Driver Adjustable output current between 1,050 and 1,750mA via DIP switch Max.
More information2-output DALI controller
87045 LIMOGES Cedex Telephone: (+33) 05 55 06 87 87 - Fax: (+33) 05 55 06 88 88 -output DALI controller Page. Use.... Technical features... 3. Overall dimensions.... 4. Connection... 5. Installation...3
More informationPHASED OUT. Emergency lighting units EM INVERTER. EM MINI BASIC, V 50/60 Hz BASIC version
EM IVERTER TC-DE TC-TE roduct description Emergency lighting supply unit f manual testing F compact fluescent lamps mall dimensions ( x 0 mm cross-section, 0 mm length) -year guarantee roperties h rated
More informationtechnical data (according to IEC ) Degree of protection IP 67 Max. ripple content 15 % U B / 20 % U B (amplifier) No-load supply current
Inductive Sensors: high-temperature ü For ambient temperatures of up to +230 C ü With integrated electronics, up to +180 C ü With external electronics, up to +230 C ü Excellent long-term reliability (according
More informationAspect 2 Circuit Digital Scene Control
Aspect 2 Circuit Digital Scene Control S p e c i f i c a t i o n 2 circuits of trailing edge dimming 500W total between the two circuits Both circuits feature independent overload, short-circuit and open-circuit
More informationIP Roombox. Hotel Room Management
Hotel Room Management Hotel solutions Versatile room management system You need a simple solution which allows you to control all the hotel room electrical applications? Hager offers you a unique combination
More informationOrdering details. Approval. Classification
Datasheet - SRB 301MC-24V Guard door monitors and Safety control modules for Emergency Stop applications / General Purpose safety controllers (Series PROTECT SRB) / SRB 301MC Fit for signal evaluation
More information32 RELAY OUTPUTS TERMINAL BLOCK SPECIFICATIONS* Versions RB SB SH Contact 1RT 1T 1T
STB 520 32 RELAY OUTPUTS TERMINAL BLOCK STB 520 terminal block provides 32 digital outputs such as relays in a very small unit. It was designed to meet industrial requirements. The availability of optocoupler-ctrolled
More informationProduct Manual. ABB i-bus EIB / KNX Switch/Dim Actuators SD/S. Intelligent Installation Systems ABB
Product Manual ABB i-bus EIB / KNX Switch/Dim Actuators SD/S Intelligent Installation Systems ABB This manual describes the function of the Switch/Dim Actuators SD/S x.16.1 with its application programs
More informationCatalogue Ignitors and power switches for HID
Catalogue 2012 Ignitors and power switches for HID Overview Product overview Ignitor matrix Standards Page 6 Page 7 Page 8 Product information Ignitors and power switches for HID Page 9 Superimposed-pulse
More informationDIN-1DIMU4. DIN Rail Universal Dimmer, 1 feed, 4 channels
The is a 4-channel universal lighting control module designed to support dimming of both forward and reverse phase type loads. A single model supports both 120 and 220-240 Volt electronic and magnetic
More informationSeries CT7N Bimetallic Overload Relays
Series CT7N imetallic Overload Relays Choose CT7N overloads in DC applications and when monitoring Variable Frequency Drives Sprecher + Schuh has always paid particular attention to the subject of motor
More informationwith handle LIMOGES Cedex 1. DESCRIPTION - USE 3. DIMENSIONS Symbol: Technology: Use:. For controlling a load remotely via a switch 2.
87045 LIMOGES Cedex Téléphone : 05 55 06 87 87 Télécopie : 05 55 06 88 88 25A power contactors silent CONTENTS PAGES 1. Description, use... 1 2. Range... 1 3. Dimensions... 1 4. Positioning - Connection...
More informationAS09..S 3-pole Contactors - Spring Terminals
4 kw 5 hp AS09..S 3-pole Contactors - Spring AC Operated Description - 3-pole contactors with spring terminals, - N.C. or N.O. built-in auxiliary contact, - Rail-mounted, no tools required, - Additional
More informationPhotoelectrics Through-beam Type PA18C.T..., DC
Photoelectrics Through-beam Type, DC Miniature sensor range Range: 20 m (Axial), 16 m (Radial) Sensitivity adjustment by potentiometer Modulated, infrared light 850 nm Supply voltage: to 30 VDC Output:
More information1 Output 1 operation. 3 Pressure unit display. 4 Main display Large 4-character LCD display. 5 Sub-display Small 4-character LCD display.
ure Sensor DP-100 Series INSTRUCTI MANUAL High-performance Digital Display For use outside Japan MEUML-DP100 V1.1 Thank you for purchasing products from Panasonic Electric Works SUNX Co., Ltd. Please read
More informationProfessional-Practice
www.osram.com/ecg-lms Professional-Practice DALI MCU: Digital potentiometer with DALI Manual lighting control with the DALI MCU for rooms with grouped luminaires with as many as 50 ECG, with or without
More informationLED MODULES READYLINE DL
LED MODULES READYLINE DL BUILT-IN MODULE LED-MODULE READYLINE DOWNLIGHT DL WU-M-538 / WU-M-539 / WU-M-540 Typical Applications Downlights Replacement for CFL DIRECT MAINS CONNECTION REDUCED FLICKER HIGH
More informationDatasheet - SRB301LC 24VAC/DC
25.02.2016-18:05:23h Datasheet - SRB301LC 24VAC/DC Guard door monitors and Safety control modules for Emergency Stop applications / General Purpose safety controllers (Series PROTECT SRB) / SRB301LC Preferred
More informationType: DILM25 10(24V50HZ) Article No.:
Type: DILM25 10(24V50HZ) Article No.: 277119 Ordering information Rated operational current AC 3 400 V I e A 25 Max. rating for three phase motors, 50 60 Hz AC 3 230 V Max. rating for three phase motors,
More informationElectronic MICROSTAT-T Temperature controller with digital indication for use with resistance thermometers and thermocouples Series 8650
M. K. JUCHHEIM GmbH & Co Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 E-mail: mail@jumo.net Internet: www.jumo.de
More informationAbsolute Encoders Multiturn
The Sendix 5863 and 5883 multiturn encoders with SSI or BiSS-C interface and optical sensor technology can achieve a resolution of max. 29 bits. A through hollow shaft up to 4 mm and a blind hollow shaft
More informationCOLORtube EQ Controller
COLORtube EQ LED-EQ COLORtube EQ Controller LED-EQC USER MANUAL 32-band audio spectrum visualizer using LED tubes CHAUVET, 3000 N 29 th Ct, Hollywood, FL 33020 U.S.A (800) 762-1084 (954) 929-1115 FAX (954)
More informationL IND. CONT. EQ. 51EB For Model No. PAXLCRU0 Only
Bulletin No. PAXLCR- B Drawing No. LP0749 Released 04/09 MODEL PAXLCR - PAX LITE DUAL COUNTER AND RATE METER UR L C US LISTED IND. CT. EQ. 51EB For Model No. PAXLCRU0 Only GENERAL DESCRIPTI The PAXLCR
More informationKNX / EIB Product Documentation. DALI Gateway. Date of issue: Order no Page 1 of 136
KNX / EIB Product Documentation DALI Gateway Date of issue: 13.03.2008 64540122.12 Order no. 7571 00 03 Page 1 of 136 KNX / EIB Product Documentation Table of Contents 1 Product definition... 3 1.1 Product
More informationStandard RS232 RS ma
1 / 5 CONTROL AND VISUALIZATION OF AC CURRENT IN SINGLE PHASE LINES BY EXTERNAL SHUNT Function Operating mode Current control Frequency control DC component control Shunt Timer Resolution Current precision
More informationLevel Measurement silometer FMC 420, FMC 423
Technical Information TI 077F/00/en Level Measurement silometer FMC 420, FMC 423 For connecting to capacitance probes or Deltapilot S hydrostatic probes Main applications The is used for continuous level
More informationIK10 IP68. Specifications. White (4 300 K typical) Warm white (3 000 K typical) Blue (470 nm) Other colors by request
1300 Industrial Road, Unit #19 San Carlos, CA 94070 FREE CALL 1-866-695-5862 US & Canada info@lumascape.com LS553LED Via Ingrade IP68 IK10 The LS553LED is a rugged, side emitting marker light constructed
More informationSceneStyle2 User Guide
SceneStyle2 User Guide Mode Lighting (UK) Limited. The Maltings, 63 High Street, Ware, Hertfordshire, SG12 9AD, UNITED KINGDOM. Telephone: +44 (0) 1920 462121 Facsimile: +44 (0) 1920 466881 e-mail: website:
More informationPROXIMITY SWITCHES INDUCTIVE TUBULAR SENSOR M30 SERIES HIGHLIGHTS APPLICATIONS
INDUCTIVE TUBULAR SENSOR M30 SERIES There are millions of inductive sensors deployed in almost every area of factory automation. They detect metal objects contactless and are distinguished by a long operating
More informationSERIES x5. Nickel-plated brass Connection 1) PUR cable type 1 Degree of protection. IP 67 Mounting. Embeddable Max. switching frequency
1 Size SERIES 400 x SERIES x Operating distance mm 0.8 0.8 1. Housing material Connection 1) PUR cable type 1 PUR cable type 1 / Connector S8 PUR cable type 1 Degree of protection Mounting Max. switching
More informationLinear flow control with actuator IFC
Linear flow control with actuator Product brochure GB 3 Edition 01.14 Linear relationship between adjustment angle and flow rate Large control ratio of 25:1 EC type-tested and certified Actuators IC 20
More informationOperating instructions III / 2004
Operating instructions III / 2004 Light sensor TOUCH DIM LS LI OSRAM GmbH Costumer-Service-Center (CSC) Germany Steinerne Furt 62 86167 Augsburg, Germany www.osram.com www.osram.de Tel. : (+49) 1803 /
More informationMG-XV operating instruction. Measuring of norm signals, 4-8-digit. Panel instrument type MG-BV Construction instrument type MG-AV
MG-XV operating instruction Measuring of norm signals, 4-8-digit Panel instrument type MG-BV Construction instrument type MG-AV Contents 1. Brief description... 3 2. Safety instructions... 3 2.1. Proper
More informationTeamWork Kits Installation Guide
TX 0 RX COM +5V APARATUS US TeamWork Kits Installation Guide TeamWork 400 and TeamWork 600 Kits The TeamWork 400 and TeamWork 600 kits consist of an HDMI switcher, system controller, Cable Cubby, and cables
More information