Colourlight. bocom. Standard Control TECHNOLOGY & DESIGN

Transcription

1 Colourlight Standard Control Lighting can be so much more than the production of lightness. Go new ways. Take color into the darkness, and make light an experience. Colored light. develops and produces a wide range of products that create and control colored light: state-of-the-art LED colored light sources for the most various purposes and conventional colored light tube technology for particular tasks. With the help of control dynamic color cycles can be realized simply and reliably. tecture, stage lighting, in living areas, at fairs and events, in lamps or lights and many other appliances as well as in creative and artistic light objects. TECHNOLOGY & DESIGN We develop for you! NEW company works out and produces innovative control devices for multicolour LED lighting. LED control devices, which can be programmed and united into a Input, provide the possibility to create various light scenarios, controlled via remote control or DMX 512. company supplies system solutions for light-emitting diode lighting, which are widely used by architects for lighting the interiors, scenes and various events.

2 Picture Name Article Function Rec. equipment Standard Control 4,5VDC - 48V DC Master cables set Slave Infrared receiver Booster Without Standard control Booster With Standard control Infrared receiver Standard control with booster and infrared receiver in housing Master with one booster Slave with one booster Master with two boosters Slave with two boosters Master Slave connection cable Standard control with integrated power supply LED driver Power supply with standard control and infrared receiver 5 VDC Master Infrared Slave receiver 10/12 VDC Master Slave 24 VDC Master Master Slave Slave connection 48 VDC Master cable Slave 10 VDC VDC Standard control with integrated power supply, current is regulated 350mA 24 V Master Infrared Slave receiver 700mA 24 V Master Master Slave connection Slave cable 7/2008 Subject to technical mail: post@-farblicht.de

3 Picture Name Article Function Rec. equipment DMX control DMX sprig connection or RJ 45 3/4 channels Without frame DMX control DMX sprig connection or RJ 45 3/4 channels With frame DMX control DMX sprig connection or RJ channels 4,5-24VDC With frame LED control 0-10 Volt 4 channel Input 1-10VDC LED control, compatible with bus rail 4,5-24VDC Master Slave Combined control, regulated voltage or regulated current bus and DMX512 Remote control Infrared remote control 7/2008 Subject to technical mail: post@-farblicht.de

4 Picture Name Article Function Rec. equipment Current source 350mA FR4 1 channel channels channels channels Current source 350mA FR4 1 channel channels channels channels Power supply 5VDC 40 W Open frame 40 W In frame 100 W W W With ventilator 300 W With ventilator 500 W With ventilator Power supply 12VDC 15 W Open frame Power supply 12VDC 60 W Open frame 60 W In frame 100 W W W With ventilator 300 W With ventilator 500 W With ventilator Power supply 24VDC 60 W Open frame 60 W In frame 100 W W W With ventilator 300 W With ventilator 500 W With ventilator 7/2008 Subject to technical mail: post@-farblicht.de

5 Master System-Control Article no.: dynamic change of colours, compatible with bus system. scenes, which can be programmed. Connection for button LED-Master Control 7,5-24VDC Compatible with -bus 7/2008 Subject to technical Slave System-Control Article no.: Pos. polarity Neg. polarity SLAVE RGB+W MASTER RGB+W For reinforcement of master control system up to Repeats the functions of the connected master con- LED-Slave Control 7,5-24VDC Bigger number of slave controls to one master control on demand! 7/2008 Subject to technical 7/2008 Subject to technical mail:

6 Next suite Next scene Start/Stop Brightness G Ground +5 +5V Data Ground Master System-Control Function and to maintain the dynamic change of colours directly in the master control device. Each master allows to add red, green, blue and white diodes by the capacity of 1.5A per channel. Masters might be united vie Bocom bus rail into a system of management of many sources and thus to ensure colour waves and sophisticated scenarios. M M M M M M -bus Asynchronous change of colour and colour waves M S S S S S S S S Synchronous reproduction of master s colour with maximum of 8 4-channel slave systems. M B B B B B B B B Synchronous reproduction of master s colour with maximum of 8 4- channel slave boosters. Via the slave system or booster it is possible to connect the following LED groups to the master system, they will repeat the change of colours synchronically with master. Slave allows to connect light diodes by the load of maximum 1.5A per channel, each System-Master System-Slave Pos. polarity IR-receiver Next Slave Neg. polarity W- R- G- B- + V - V L - (Black) L + (Red) 7/2008 Subject to technical DC mail: post@-farblicht.de

7 Article no.: xx MASTER Standard-Control, Master. odes. Load up to max. 4x2A. SLAVE Standard-Control, Slave. For reinforcement of master control up to 4 x 2A. Repeats the connection functions of master control. To one Master s connection principle 1 2 GND MASS, total - 3 IR Data IR 4 3,3 VDC VDC+IR INT1 Input for button. Turn in according to mass BLUE Output, control of the blue LEDs 12 GREEN Output, control for the green LED s 13 RED Output, control for the red LED s 14 WHITE/ YELLOW Output, control for the white/yellow LED s 15 GND MASS, total - 16 VCC Power supply, VDC Name Standard-Control - Master (IR) Standard-Control - Master (Button) Standard-Control - Slave Article no Bigger number of slave controls to one master control on demand! Slave control LED, negative 4 x 2A 7/2008 Subject to technical mail: post@-farblicht.de

8 Booster Article no.: For reinforcement of slave control up to 4 x5a. To one Bigger number of slave controls to one master control on demand! 4 channels Booster with standard control Article no.: BOOSTER Booster with stadnard control, max. 4 x 5A. 4 channels 7/2008 Subject to technical mail: post@-farblicht.de

9 Cables set for standard control Article no.: Cables` set Cables set for standard control Master with infra red sensor for IR remote control Cables set for standard control master for work via buttons. IR Name Article no.: Cables set with IR Cables set for button Button programmed dynamic scenarios of colour change and also to set the certain colour, to regulate brightness and speed of playing with the help of IR remote control or button. Each standard master control allows connecting red, green, blue and white diodes with the capacity of max. 2A per channel. Synchronic master colour change up to 8 4-channels standard slaves B B B B B B B B Synchronic master colour change to 8 4-channels boosters With the help of standard slave control and booster it is possible to connect to the master control the following LED groups, which would repeat the change of colours synchronically with master control. Slave control allows connecting diodes with the capacity of max. 2A per channel. Each booster - max. 5A per channel. Standard Master Control Standard Slave Control Cables set for standard master control with infra red sensor sor for IR remote control 7/2008 Subject to technical mail: post@-farblicht.de

10 LED RGB LED RGB RGB-LED-Master control LED-Master control, negative 7,5-24VDC IR receiver Name Article no.: Master with one booster Slave with one booster MASTER 2 BOOSTER RGB-LED-Master control LED-Master control, negative 7,5-24VDC IR receiver Name Article no.: Master with two boosters Slave with two booster /2008 Subject to technical mail: post@-farblicht.de

11 Standard Master control LED RGB Connection 1 IR-sensor 230VDC / 50Hz 1. Description of power supply/led master control: Connect + V and V cleats of power supply with + and cleats of master control. Connect power supply to 230VDC/50Hz to L/N and ground cable. Master power supply 2 Master 2. Description of connection LED master control: Cable plug of power supply LED (for example 1.0 mts) connect to LED stripe. It is necessary to control the mutual correspondence of red markers on the plug and stripe. Plug should be attached without distortion. ster control, the second power supply cable LED to the right ones. LED supply Power supply for LED colors: Cable master control RGB Brown = red 1 Green = green 2 Yellow = blue 3 White = VCC+ 4 3 Master Slave to another Slave 3. Connection master/slave For connection of master and slave and also for connection of the following slaves there is a special cable, with the help of which the devices are connected via plug. 4 Master or Slave 4. There is a possibility to connect master and slave with the help of usual cable (4 x 0.25 mm²). For this cleats on the back side of master or slave should be used. The connection is done 1:1, this means that the corresponding contacts are connected with each other. 7/2008 Subject to technical to another Slave Attention: the power should be switched in only after all the contacts are connected. mail: post@-farblicht.de

12 grated power supply Article no.: 50-2xxx-01 MASTER/SLAVE Standard master control with integrated power supply, connection to the button or to Slave control for reinforcement of the master control, 2A per channel. Voltage Article no.: Master Slave 5VDC /12VDC VDC VDC grated power supply Article no.: 50-2xxx-0 MASTER/SLAVE Standard master/slave control for light diodes with regulated power 350 or 700 ma. Master or slave control connection. Controlled by infrared, button and sensor Voltage Article no.: Master Slave 350mA mA /2008 Subject to technical mail:

13 Standard-Master-control with integrated power supply Function LED connection IR/button connection Voltage connection 230V Slave connection Application: have the possibility to connect various light elements as for example LED stripes in different variants. In the pes! Standard control (Master- Slave) White/RGB stripes (40cm), 10VDC White/RGB stripes (48cm), 24VDC 12VDC 8 stripes 24VDC 8 stripes 15 stripes Fullcolour stripes, 24VDC To one master control you can connect up to 8 slave controls. The functions of control device are controlled with the help of for example Infrared remote control, slave control 7/2008 Subject to technical mail: post@-farblicht.de

14 - - Wankelstrasse 13 Germany Tel.: Fax: post@-farblicht.de Top Management: Bosko Papric Amtsgericht Neuss HR 5914 Ust.-IdNr. DE StNr The rights for this catalogue are reserved legally. : Usage or distribution of the content or pictures is possible only after concrete authorization from the owner. The responsibility for the content belongs to Subject to technical.