Introduction. Pressure Gauges (analogue/digital) Pressure Gauges (analogue/digital) and Accessories.

Size: px

Start display at page:

Download "Introduction. Pressure Gauges (analogue/digital) Pressure Gauges (analogue/digital) and Accessories."

Cynthia Wilkerson
5 years ago
Views:

Pressure auges (analogue/digital) Introduction Pressure auges (analogue/digital) and Accessories Measuring pressure on equipment is indispensable for monitoring and ensuring the smooth functioning

1 Pressure auges (analogue/digital) Introduction Pressure auges (analogue/digital) and Accessories Measuring pressure on equipment is indispensable for monitoring and ensuring the smooth functioning and operating safety of these systems. STAU offers a variety of simple pressure measuring devices for liquid and gaseous media. These pressure gauges can be used as both stationary or portable devices. STAU addresses the very extensive width of possible system pressures and the strict requirements for precision with a variety of pressure gauge types with different measuring ranges. The pressure gauges can be purchased alone or in a test kit. The kits can be supplied with gauges with different pressure ranges and adaptors to satisfy any requirement. The analog pressure gauges are primarily designed for permanent installations. STAU also offers a digital line for analytical troubleshooting. These digital pressure gauges are also available as a pressure test kit and also make it possible to perform the many different measurement tasks with the help of adaptors and the measuring hose. An important advantage is the possibility to measure pressure peaks with the device, to save them short term and to display them in the display as MIN and MAX values. In addtion to the individual products, the STAU measuring devices are also available as kit. D4

Introduction Pressure auges (analogue/digital) Information on the Pressure quipment

to the uropean Standard N 8371 and are manufactured and tested according to appropriate

25 PSI and 2900 PSI come under ood ngineering Practice and must not carry a mark

Pressure gauges (SP) with a full scale value of less than 0,5 bar / 7.

Our pressure gauges (SP) with a full scale value of > 200 bar / 2900 PSI receive a mark

The mark is attached to the outside of the housing (type designation plate).

Pressure auges Accessories Single Station auge Isolator Valve (see on page 90, Valves

Isolator Needle Valves (see on page 91, see Valves section) D Diagtronics Test Hoses

2 Introduction Pressure auges (analogue/digital) Information on the Pressure quipment Directive (PD) 97/23/ Pressure quipment Directive (PD) Our pressure gauges (SP) conform to the uropean Standard N 8371 and are manufactured and tested according to appropriate requirements. Pressure gauges with a full scale value between 0,5 bar and 200 bar / 7.25 PSI and 2900 PSI come under ood ngineering Practice and must not carry a mark (section 3, paragraph 3). Pressure gauges (SP) with a full scale value of less than 0,5 bar / 7.25 PSI and loose diaphragm sealings do not come under the PD and must not carry a mark. Our pressure gauges (SP) with a full scale value of > 200 bar / 2900 PSI receive a mark according to the conformity procedure. The mark is attached to the outside of the housing (type designation plate). We are not authorised to mark pressure gauges without a company name or a company logo. Pressure auges Accessories Single Station auge Isolator Valve (see on page 90, Valves section) Multi Station auge Isolator Valve (see on page 90, Valves section) auge Isolator Needle Valves (see on page 91, see Valves section) D Diagtronics Test Hoses auge Adaptor (see pages B36 ff., STAU Test section) auge Adaptor (see pages B11/B21/B27/B29, STAU Test section) Direct auge Adaptor (see on pages B11/B21/B27, STAU Test section) Adjustable auge itting (see on page B34, STAU Test section) D5

Pressure auges (analogue/digital) Product Information / Order odes Pressure auge (analogue) Type SP Pressure auge (Analogue) Type SP (Stem Mounting) Product Description Area of Application Mechanical

3 Pressure auges (analogue/digital) Product Information / Order odes Pressure auge (analogue) Type SP Pressure auge (Analogue) Type SP (Stem Mounting) Product Description Area of Application Mechanical pressure measurement eatures Pressure auge (Analogue) Type SP (Panel Mounting) Order odes SP P B04 U Suitable for hydraulic oil and gaseous media compatible with copper based alloys Available in nominal sizes 63 and 100 mm / 2.5 and 4 in Thread form: for BSP (1/4 and 1/2), NPT (1/4 NPT and 1/2 NPT), SA (7/16 20 UN) Stainless Steel (1.4301) housing Acrylic sight glass Standard dual scales with pressure indication in bar and PSI Note: Please consult STAU before you use SP with other media. Options Protective rubber cap Additional scale readings including personilisation as spare parts Technical Data Pressure gauge according to N 8371 Accuracies SP063: 1.6 (± 1.6 % S* as per N 8371) SP100: 1.0 (± 1.0 % S* as per N 8371) Permissible Temperatures Ambient: / Media: max. +60 / max Protection Ratings IP 65: for all manometer SP 100 and SP 063 > 16 bar / 232 PSI IP 65 protection rating: Dust tight and protected against water jets IP 54 for all manometer SP 063 compensation opening IP 54 protection rating: Dust protected and protected against splashing water Series and Type Stainless Steel Pressure auge SP Size Ø 63 mm, with 1/4 or 1/4 NPT connection 063 Ø 100 mm, with 1/2 or 1/2 NPT connection 100 Pressure Ranges (only for type 01 bar/psi) ,5 bar / PSI (1)(1,5) bar / PSI (1) bar / PSI bar / PSI bar / PSI bar / PSI bar / PSI bar / PSI bar / PSI bar / PSI bar / PSI bar / PSI bar / PSI bar / PSI bar / PSI Note: Others on request. Information always refer to the pressure setting of the outside scale. Styles of Scales bar / PSI (bar outside/psi inside standard option) 01 bar 02 PSI 03 PSI / bar (PSI outside/ bar inside) 05 kpa / PSI (kpa outside/ PSI inside) 10 Note: Others on request. Adaption Stem mounting Panel mounting Process onnection 1/4 (only SP 063) B04 1/2 (only SP 100) B08 1/4 NPT (only SP 063) N04 1/2 NPT (only SP 100) N08 7/16 20 UN (only SP 063) U04 Note: Others on request. Accessories No accessory Ubolt assembly (for panel mount only) Protective rubber cap (for stem mount only) S P (none) U R U or further information on page B34, STAU Test section. D6 * S = ull Scale

4 Dimensions Pressure auges (analogue/digital) Pressure auge (analogue) Type SP SW Hex14 (Hex.55) Ø Ø SW Hex14 (Hex.55) 1 B SW Hex14 (Hex.55) H ØB Ø Ø3,5 (3x) (Ø.14) (3x) 120 Ø Dimensions SP 063 SP S... SP P... U SP P... Version Pressure auge SP063 SP U SP Dimension ( mm /in) ØB Ø Ø Ø B / ,5 1/4 NPT /16 20 UN / ,5 56 1/4 NPT /16 20 UN / /4 NPT /16 20 UN D Diagtronics B Hex22 (Hex.87) H ØB Ø 30 Hex22 (Hex.87) (1.18) Ø4,75 (3x) (Ø.19) (3x) Ø Ø 120 Hex22 (Hex.87) Ø 30 (1.18) 1 SP S... SP P... U SP P... Dimensions SP 100 Version Pressure auge SP100 SP U SP Dimension ( mm /in) ØB Ø Ø Ø B / /2 NPT / , /2 NPT / , /2 NPT * S = ull Scale Dimensional drawings: All dimensions in mm (in). D7

Pressure auges (analogue/digital) Product Information / Order odes Pressure Test Kit (analogue) Type SMB20 / SMB15 Pressure test

Pressure test kit (analogue) with SP 100 (1x) Product Description Order odes In addition to the individual SP gauges, the STAU

SMB20 1 xxx / xxx / xxx 6 The SMB Pressure Test Kits are assembled in various versions, in accordance with customer wishes.

Series and Type Pressure Test Kit, analogue (STAU Test 20) Pressure Test Kit, analogue (STAU Test 15) SMB20 SMB15 Number of

Pressure Ranges 1... 3 bar / 14.5... 43 PSI (1)0003 0... 10 bar / 0... 145 PSI 010 0... 16 bar / 0... 232 PSI 016 0... 25 bar / 0.

.. 2320 PSI 160 0... 250 bar / 0... 3625 PSI 250 0... 400 bar / 0... 5801 PSI 400 Note: Please indicate pressure ranges in bar.

5 Pressure auges (analogue/digital) Product Information / Order odes Pressure Test Kit (analogue) Type SMB20 / SMB15 Pressure test kit (analogue) with SP 063 (1x) Pressure test kit (analogue) with SP 063 (2x) Pressure test kit (analogue) with SP 063 (3x) Pressure test kit (analogue) with SP 100 (1x) Product Description Order odes In addition to the individual SP gauges, the STAU Pressure auges are also available as part of a pressure test kit. SMB20 1 xxx / xxx / xxx 6 The SMB Pressure Test Kits are assembled in various versions, in accordance with customer wishes. All pressure test kits are supplied in a handy case with customdesigned foam inserts. Please see on page D9 for standard options. Series and Type Pressure Test Kit, analogue (STAU Test 20) Pressure Test Kit, analogue (STAU Test 15) SMB20 SMB15 Number of Pressure auges 1 pressure gauge SP pressure gauges SP pressure gauges SP pressure gauge SP 100 /1001 Pressure Ranges bar / PSI (1) bar / PSI bar / PSI bar / PSI bar / PSI bar / PSI bar / PSI bar / PSI bar / PSI bar / PSI 400 Note: Please indicate pressure ranges in bar. or one pressure gauge please replace xxx. or two pressure gauges please replace xxx/xxx. or three pressure gauges please replace xxx/xxx/xxx. Material Surface Steel, zinc/nickel plated 6 or further information on page B35, STAU Test section. D8

6 Standard Options / Order odes Pressure auges (analogue/digital) Standard Option for Pressure Test Kits (analogue) Type SMB20 / SMB15 Series omponents Order odes Series omponents Order odes 1x Test hose (2000 mm length) SMS202000B6 1x Test hose (2000 mm length) SMS152000B6 1x Pressure gauge Ø 63 mm SP 063xxx... 1x Pressure gauge Ø 63 mm SP 063xxx... 1x auge adaptor 1/4 SMA201/4POR6 1x auge adaptor 1/4 SMA151/4POR6 1x Direct gauge adaptor 1/4 SMD201/4POR6 1x Direct gauge adaptor 1/4 SMD151/4POR6 SMB201xxx6 1x Test coupling 1/4 SMK201/4P6 SMB151xxx6 1x Test coupling 1/4 SMK151/4PB6 1x Test coupling M10 x 1 SMK20M10x1PA6 1x Test coupling M14 x 1,5 SMK15M14x1,5PB6 1x Thread adaptor 3/8 SRS203/8B6 1x Thread adaptor 3/8 SRS153/8B6 1x Thread adaptor 1/2 SRS201/2B6 1x Thread adaptor 1/2 SRS151/2B6 1x Dust cloth 1x Dust cloth xxx/xxx/xxx = pressure ranges see on page D8 (please indicate pressure ranges in bar) ustom kits available upon request. Please consult STAU. Series omponents Order odes Series omponents Order odes 1x Test hose (2000 mm length) SMS202000B6 1x Test hose (2000 mm length) SMS152000B6 2x Pressure gauges Ø 63 mm SP 063xxx... 2x Pressure gauges Ø 63 mm SP 063xxx... 1x auge adaptor 1/4 SMA201/4POR6 1x auge adaptor 1/4 SMA151/4POR6 1x Direct gauge adaptor 1/4 SMD201/4POR6 1x Direct gauge adaptor 1/4 SMD151/4POR6 SMB202xxx/xxx6 1x Test coupling 1/4 SMK201/4P6 SMB152xxx/xxx6 1x Test coupling 1/4 SMK151/4PB6 1x Test coupling M10 x 1 SMK20M10x1PA6 1x Test coupling M14 x 1,5 SMK15M14x1,5PB6 1x Thread adaptor 3/8 SRS203/8B6 1x Thread adaptor 3/8 SRS153/8B6 1x Thread adaptor 1/2 SRS201/2B6 1x Thread adaptor 1/2 SRS151/2B6 1x Dust cloth 1x Dust cloth xxx/xxx/xxx = pressure ranges see on page D8 (please indicate pressure ranges in bar) ustom kits available upon request. Please consult STAU. Series omponents Order odes Series omponents Order odes 2x Test hoses (2000 mm length) SMS202000B6 2x Test hoses (2000 mm length) SMS152000B6 3x Pressure gauges Ø 63 mm SP 063xxx... 3x Pressure gauges Ø 63 mm SP 063xxx... 1x auge adaptor 1/4 SMA201/4POR6 1x auge adaptor 1/4 SMA151/4POR6 2x Direct gauge adaptors 1/4 SMD201/4POR6 2x Direct gauge adaptors 1/4 SMD151/4POR6 SMB203xxx/xxx/xxx6 3x Test couplings 1/4 SMK201/4P6 SMB153xxx/xxx/xxx6 3x Test couplings 1/4 SMK151/4PB6 3x Test couplings M10 x 1 SMK20M10x1PA6 3x Test couplings M14 x 1,5 SMK15M14x1,5PB6 1x Thread adaptor 3/8 SRS203/8B6 1x Thread adaptor 3/8 SRS153/8B6 1x Thread adaptor 1/2 SRS201/2B6 1x Thread adaptor 1/2 SRS151/2B6 1x Dust cloth 1x Dust cloth xxx/xxx/xxx = pressure ranges see on page D8 (please indicate pressure ranges in bar) ustom kits available upon request. Please consult STAU. D Diagtronics Series omponents Order odes Series omponents Order odes 1x Test hose (2000 mm length) SMS202000B6 1x Test hose (2000 mm length) SMS152000B6 1x Pressure gauge Ø 100 mm SP 100xxx... 1x Pressure gauge Ø 100 mm SP 100xxx... 1x auge adaptor 1/4 SMA201/4POR6 1x auge adaptor 1/4 SMA151/4POR6 1x Direct gauge adaptor 1/4 SMD201/4POR6 1x Direct gauge adaptor 1/4 SMD151/4POR6 SMB20/1001xxx6 1x Test coupling 1/4 SMK201/4P6 SMB15/1001xxx6 1x Test coupling 1/4 SMK151/4PB6 1x Test coupling M10 x 1 SMK20M10x1PA6 1x Test coupling M14 x 1,5 SMK15M14x1,5PB6 1x Thread adaptor 3/8 SRS203/8B6 1x Thread adaptor 3/8 SRS153/8B6 1x Thread adaptor 1/2 SRS201/2B6 1x Thread adaptor 1/2 SRS151/2B6 1x Dust cloth 1x Dust cloth xxx/xxx/xxx = pressure ranges see on page D8 (please indicate pressure ranges in bar) ustom kits available upon request. Please consult STAU. Accessories (onnection Adaptors) 1/4 M16 x 2 Adaptor Adaption from to Dimension SDA201/46 1/4 M16 x 2 SDA151/46 1/4 M16 x 1,5 SDA121/46 1/4 S12,65 x 1,5 SDA adaptor onnects the pressure gauge to a test coupling SAD adaptor Only in conjunction with the SDA201/46 adaptor, connects to other test coupling sizes Test coupling STAU Test or comparable SAD20/15P6 M16 x 2 M16 x 1,5 SAD20/12P6 M16 x 2 S12,65 x 1,5 SAD20/10P6 M16 x 2 Plugin system Other adaptors are available. D9

Pressure auges (analogue/digital) Product Information / Technical Data / Order odes Digital Pressure auge Type SPDII Product Description The SPDII Digital Pressure auges are intended to measure and

7 Pressure auges (analogue/digital) Product Information / Technical Data / Order odes Digital Pressure auge Type SPDII Product Description The SPDII Digital Pressure auges are intended to measure and display pressures in hydraulic systems, particularly for oils, lubricants and water. They can display the current measured values, as well as minimum and maximum values, with an accuracy of 0,5 % of full scale. The SPDII Digital Pressure auges are available individually, or as part of a complete pressure test kit. They are very sturdy, reliable, easy to use and come with the mark (evidence of conformity compliance). eatures Bar graph display (drag indicator) Background lighting Zero correction Battery charge display Order odes Series and Type Digital Pressure auge SPDII B0016 B AL SPDII Pressure Ranges bar / PSI B bar / PSI B bar / PSI B bar / PSI B0600 Process onnection 1/4 B 7/16 20 UN U alibration (none) AL Pressure Ranges Version Pressure Range ( bar /PSI) Maximum Pressure ( bar /PSI) Burst Pressure ( bar /PSI) B B B B Technical Data Materials Housing made of diecast Zinc with TP rubber protective covering Wetted parts: Stainless Steel , NBR, ceramic askets: NBR (BunaN ) PM (Viton ) or PDM upon request Dimensions and Weight Diameter: 79 mm / 3.11 in Depth: 33 mm / 1.30 in Weight: 540 g / 1.19 Ibs Display Text display 4 1/2digit Size: 50 x 34 mm / 1.97 x 1.34 in Actual value display: 15 mm /.59 in MIN/MAX or S* display: 8 mm /.31 in Units: bar, PSI, Mpa, kpa, mbar Peak pressure measurement with 10 ms sampling rate Lighted measured value display Accuracy ±0,25 % S* typ. / ±0,5 % S* max. Resolution: 4096 steps Permissible Temperatures Ambient: / Media: / Storage: / Relative humidity: < 85 % Battery life: max hours (operating without lighting, 2 x 1,5 V D AA (LR6AA) Alkaline Mignon) Process onnections 1/4 or 7/16 20 UN made of Stainless Steel Vibration: I / Hz / 5 g Shock: I / 11 ms / 25 g Load cycles (10 6 ): 100 Protection Rating IP 67 protection rating: Dust tight and protected against powerful water jets; even immersion (up to 1 m / 3.28 ft) and time D10 * S = ull Scale

Product Information / Technical Data / Order odes Pressure auges (analogue/digital) Pressure Test Kit (digital) Type SMBDII Pressure Test Kit (Digital) Type SMBDII Order odes Product Description

8 Product Information / Technical Data / Order odes Pressure auges (analogue/digital) Pressure Test Kit (digital) Type SMBDII Pressure Test Kit (Digital) Type SMBDII Order odes Product Description SMBDII 20 B0016 B AL In addition to the individual SPDII devices, the STAU Digital Pressure auges are also available as part of a pressure test kit. Series and Type Pressure Test Kit, digital pressure gauge Pressure Ranges SMBDII Adaptor Version Adapts to STAU Test 20 (M16 x 2) 20 Pressure Ranges bar / PSI B bar / PSI B bar / PSI B bar / PSI B0600 Process onnection 1/4 B 7/16 20 UN U alibration Version Pressure Range ( bar /PSI) Maximum Pressure ( bar /PSI) Burst Pressure ( bar /PSI) B B B B (none) AL The SMBDII pressure test kits are assembled in various versions, in accordance with customer wishes. All pressure test kits are supplied in a handy case with customdesigned foam inserts. omponents Standard Option SMBDII20 Digital Pressure auge SPDII Test Hose (2 m / 6.56 ft), M16 x 2, pressureresistant 600 bar (8702 PSI) SMS202000B6 Adaptor SDA (1/4 to M16 x 2) SDA201/46 Hose onnector SSV206 Test oupling SMK201/4P6 Test oupling SMK20M10x1PA6 Thread Adaptor SRS203/8B6 Thread Adaptor SRS201/2B6 Operating manual (multilingual) on D Dust cloth D Diagtronics Accessories (onnection Adaptors) 1/4 M16 x 2 Adaptor Adaption from to Dimension SDA201/46 1/4 M16 x 2 SDA151/46 1/4 M16 x 1,5 SDA121/46 1/4 S12,65 x 1,5 SDA adaptor onnects the pressure gauge to a test coupling SAD adaptor Only in conjunction with the SDA201/46 adaptor, connects to other test coupling sizes Test coupling STAU Test or comparable SAD20/15P6 M16 x 2 M16 x 1,5 SAD20/12P6 M16 x 2 S12,65 x 1,5 SAD20/10P6 M16 x 2 Plugin system Other adaptors are available. D11

Selection matrix for electronic pressure switches

Selection matrix for electronic pressure switches Type / series 0500 050 050 05 050 0570 050 05 05 05 050 05 05 05 055 056 Page 09 09 7 0 5 5 5 5 9 9 9 9 9 9 Technology Measuring cell ceramic / thick-film