Page 1 of 6 FIELD MANUFATURING Review of Printing unit standards Subfield Domain Id Printing Printing - Reel-Fed 226-229, 2262, 226, 2272, 2279, 1612-1626, 20667 Printing - Sheet-Fed,, 6, 66, 68, 70, 72, 7-718, 920, 1609, 202 The ommunications and Media Industry Training Organisation (MITO) has completed the review of the unit standards listed above. Date new versions published June 20 Planned review date December 201 Summary of review and consultation process These unit standards were reviewed because they had reached their planned review date. onsultation meetings were held between industry representatives from the Reel-Fed and Sheet-Fed sectors and members of MITO to discuss the changes required to the unit standards and qualifications. At these meetings, the attendees considered: The currency of the unit standards. The accuracy and appropriateness of the content of the unit standards. How the levels and credit values correspond to the outcomes of the unit standards. Any gaps in skills and/or knowledge that could be filled by the development of new unit standards. It was established that the unit standards in the Printing - Reel-Fed domain required considerable change and it was agreed that, where practical, unit standards that covered each of the Reel-fed processes should be combined and replaced with single unit standards that covered all processes. The unit standards in the Printing - Sheet-Fed domain were considered and some unit standards were combined and replaced with new unit standards that better suit changes in industry requirements. Unit standards 66, 68, 70, and 72 were designated expiring because they are no longer required by industry. These unit standards are included in the National ertificate in Printing (Printing Sheet-fed: Letterpress) (Level ) [Ref: 000] which is under review. Unit standards 7 and 712 were also designated expiring because they are no longer required by industry. These unit standards are included in the National ertificate in Printing (Printing Sheet-fed: Small Offset) (Level ) [Ref: 002] which is under review. I:\Audit\ReviewSumTemp\revsumjun-1.doc
Page 2 of 6 Main changes resulting from the review Printing Reel-fed domain Unit standard 26 replaced unit standards 228 and 229. Unit standard 2611 replaced unit standards 2262 and 226. Unit standard 2612 replaced unit standards 2272, 161, 161, 1616, and 1617. Unit standard 261 replaced unit standards 2279, 1618, 1619, 1620 and 1621. Unit standard 261 replaced unit standards 162 and 162. Unit standard 261 replaced unit standard 20667. The credit value of unit standard 1622 increased from 2 to. Unit standard 227 was replaced with new unit standard 2617 which is registered under the Printing Production domain. The title of unit standard 1626 was updated and the level and credit value increased to level, credits. New unit standard 2616 was created. Unit standard 162 was designated expiring because it is no longer required by industry. Printing Sheet-fed domain Unit standards 2618 and 2619 replaced unit standards 7, 711, 712, 71, and 71. Unit standard 2620 replaced unit standards 71 and 716. Unit standard 2621 replaced unit standard 202. The title of unit standard 920 was updated. The title of unit standard 1609 was updated and the level and credit value increased to level, credits. New unit standard 2622 was created. Unit standards, 66, 68, 70, 72, 717, and 718 were designated expiring because they are no longer required by industry. Unit standards categorised as category or D expire at the end of December 201. Impact on existing provider accreditations None. Impact on Accreditation and Moderation Action Plan (AMAP) AMAP 000 has been updated to reflect the changes made to the standards. I:\Audit\ReviewSumTemp\revsumjun-1.doc
Page of 6 Impact on registered qualifications Key to type of impact Affected Not materially affected The qualification lists a reviewed classification (domain or subfield) in an elective set The qualification lists a standard that has changes to level or credits The qualification lists a or D category standard The qualification lists a standard that has a new title The qualification lists a standard that has a new classification The following MITO qualifications are impacted by the outcome of this review and will be updated when they are reviewed in 20. The unit standards that generated the status Affected are listed in bold. Qualification title Standard in the qualification National ertificate in Printing (Printing Sheet-fed: Letterpress) 66, 68, 70, 70, 72, 1609 (Level ) [Ref: 000] National ertificate in Printing (Printing Sheet-fed: Offset) (Level, 71, 71 ) [Ref: 001] National ertificate in Printing (Printing Sheet-fed: Small Offset) 7, 712, 1609, 202 (Level ) [Ref: 002] National ertificate in Printing (Printing Sheet-fed: Offset) (Level 7, 711, 71, 1609, ) [Ref: 00] National ertificate in Printing (Production Support)) (Level 2) with strands in Sheet-fed Offset; Reel-fed Printing; Screen Printing; and Dry Offset [Ref: 09] National ertificate in Printing (Production Support: ut and rease 202 Printed Substrates) (Level ) [Ref: 061] National ertificate in Printing (Printing - Reel-fed) (Level ) with strands in Offset, Letterpress, Flexographic, and Gravure [Ref: 066] National ertificate in Printing (Printing Reel-fed) (Level ) with strands in Offset, Letterpress, Flexographic, and Gravure [Ref: 066] National ertificate in Printing (Binding and Finishing) (Level ) with strands in Print finishing Sheet-fed, Print finishing Reel-fed, Folder Operator, Guillotine Operator, Hand Bookbinding, and Machine Bookbinding [Ref: 1171] 202 2262, 226, 920, 1622, 162, 162, 202 228, 229, 2262, 226, 2272, 161, 161, 1616, 1617, 1622, 1626, 20667 227, 2279, 1618, 1619, 1620, 1621 227 Review ategories and changes to classification, title, level, and credits All changes are in bold. Key to review category A Dates changed, but no other changes are made - the new version of the standard carries the same Id and a new version number B hanges made, but the overall outcome remains the same - the new version of the standard carries the same Id and a new version number Major changes that necessitate the registration of a replacement standard with a new Id D Standard will expire and not be replaced I:\Audit\ReviewSumTemp\revsumjun-1.doc
Page of 6 Subfield Printing Domain Printing - Reel-Fed Id Title Level redit Review ategory 226 arry out advanced maintenance for reel-fed B presses and equipment 228 229 Undertake pre-make ready for reel-fed (offset process) Undertake pre-make ready for reel-fed 12 26 (letterpress, flexographic and gravure processes) Undertake pre-make ready for reel-fed 12 2262 226 Wash up a reel-fed press (offset process) Wash up a reel-fed press (letterpress, flexographic and gravure processes) 2611 2272 161 161 1616 1617 2612 2279 1618 1619 1620 1621 261 Wash up a reel-fed press Print single colour work on a reel-fed press Make ready a reel-fed press for single colour work (offset process) Make ready a reel-fed press for single colour work (letterpress process) Make ready a reel-fed press for single colour work (flexographic process) Make ready a reel-fed press for single colour work (gravure process) Make ready and produce single process work for reel-fed Make ready and print four colour process work on a reel-fed press Make ready a reel-fed press and print multi colour close register work (offset process) Make ready a reel-fed press and print multi colour close register work (letterpress process) Make ready reel-fed press and print multi colour close register work (flexographic process) Make ready a reel-fed press and print multi colour close register work (gravure process) Make ready and produce multiple process work for reel-fed 1612 Set up an infeed system on a reel-fed B press 161 Web up a reel-fed press 2 B 1622 Load and prepare substrates for reel-fed 2 2 B 162 162 2 2 12 261 Assist operator on a reel-fed offset press Assist operator on a reel-fed letterpress, flexographic or gravure press Assist press operator on a reel-fed press 162 Print single colour in-line flexographic work D 2 20 2 0 0 0 0 0 0 0 0 12 I:\Audit\ReviewSumTemp\revsumjun-1.doc
Page of 6 Id Title Level redit Review ategory 1626 Demonstrate knowledge of substrates used on 2 B reel-fed presses Demonstrate knowledge of, calculate requirements for, and handle and store substrates used for reel-fed 20667 Demonstrate trade knowledge for reel-fed 12 261 Demonstrate industry knowledge for reel-fed 1 2616 Undertake laminating on a reel-fed machine 12 New Subfield Printing Domain Printing - Reel-Fed Id Domain Title Level redit Review ategory 227 2617 Printing Reel-fed Printing Production Draw imposition schemes for reel-fed (offset process) Generate complex imposition schemes and impose pages for Subfield Printing Domain Printing - Sheet-Fed Id Title Level redit Review ategory arry out advanced maintenance for sheet-fed D Undertake pre-make ready for sheet-fed offset 20 B 6 Wash up a sheet-fed offset press B 66 Undertake pre-press for sheet-fed letterpress work 1 D 68 Make ready a sheet-fed letterpress press D for single colour work 70 Print single colour sheet-fed letterpress work D 72 Wash up a sheet-fed letterpress press D 7 711 712 71 71 2618 2619 Make ready a sheet-fed non-registering or registering offset press for single colour work Make ready a sheet-fed registering offset press for single colour work Print single colour work on a sheet-fed nonregistering offset press Print single colour work on a sheet-fed registering offset press Make ready and print two or more colour close register sheet-fed offset work Make ready a sheet-fed offset press for spot colour work Print spot colour close register sheet-fed offset work 0 1 8 0 0 0 I:\Audit\ReviewSumTemp\revsumjun-1.doc
Page 6 of 6 Id Title Level redit Review ategory 71 716 Make ready and print four colour process sheet-fed offset work on a single or two colour press Make ready and print four colour process sheet-fed 2 2 2620 offset work on a four colour press Make ready and print four colour process sheet-fed offset work 717 Make offset plates for sheet-fed small offset D 718 Make ready and print two colour sheet-fed 0 D letterpress work 920 Assist machine operator for sheet-fed offset 2 1 B Assist press operator for sheet-fed offset 1609 Demonstrate knowledge of substrates used for 2 B sheet-fed Demonstrate knowledge of, calculate requirements for, and handle and store substrates used for sheet-fed 202 Demonstrate trade knowledge for sheet-fed 2621 Demonstrate industry knowledge for sheet-fed 1 2622 Apply coatings using a sheet-fed press 12 New I:\Audit\ReviewSumTemp\revsumjun-1.doc