-SQA-SCOTTISH QUALIFICATIONS AUTHORITY HIGHER NATIONAL UNIT SPECIFICATION GENERAL INFORMATION
|
|
- Lynne Hunt
- 5 years ago
- Views:
Transcription
1 -SQA-SCOTTISH QUALIFICATIONS AUTHORITY HIGHER NATIONAL UNIT SPECIFICATION GENERAL INFORMATION -Unit Number Superclass- -Title- XL D/A AND A/D CONVERTERS DESCRIPTION- GENERAL COMPETENCE FOR UNIT: Explaining the operation of devices and circuits used in analogue to digital and digital to analogue interfacing. S 1. explain the operation of digital to analogue converters (DAC); 2. explain the operation of analogue to digital converters (ADC); 3. explain the operation of associated circuits used in interfacing; 4. test digital to analogue converters and analogue to digital converters and demonstrate the principle of aliasing. CREDIT VALUE: 1 HN Credit ACCESS STATEMENT: Access to this unit is at the discretion of the centre. However it would be beneficial if the candidate had an understanding of operational amplifiers. This may be evidenced by possession of HN Unit: Operational Amplifiers. or similar qualifications or experience For further information contact: Committee and Administration Unit, SQA, Hanover House, 24 Douglas Street, Glasgow G2 7NQ. Additional copies of this unit may be purchased from SQA (Sales and Despatch section). At the time of publication, the cost is 1.50 (minimum order 5.00).
2 HIGHER NATIONAL UNIT SPECIFICATION STATEMENT OF STANDARDS UNIT NUMBER: UNIT TITLE: D/A AND A/D CONVERTERS Acceptable performance in this unit will be the satisfactory achievement of the standards set out in this part of the specification. All sections of the statement of standards are mandatory and cannot be altered without reference to SQA. 1. EXPLAIN THE OPERATION OF DIGITAL TO ANALOGUE CONVERTERS (DAC) The performance parameters of a DAC are defined correctly. The resolution of a DAC for a pure Binary input and a BCD input code is calculated correctly. The explanation of the operation of a weighted resistor DAC and an R-2R ladder network DAC is correct. Parameters: accuracy; linearity; resolution; settling time. Written and graphical evidence of the candidate s knowledge and understanding of the operation of digital to analogue converters, as specified in performance criteria to. 2. EXPLAIN THE OPERATION OF ANALOGUE TO DIGITAL CONVERTERS (ADC) The performance parameters of an ADC are defined correctly. Explain the operation of the ADC correctly from the given diagrams. 2
3 Parameters: resolution; gain error; linearity; settling time; conversion time. ADCs: flash ADC; digital ramp ADC; tracking ADC; single slope and dual slope ADC; successive-approximation ADC. Written and graphical evidence of the candidate s knowledge and understanding of the operation of analogue to digital converters, as specified in performance criteria and. 3. EXPLAIN THE OPERATION OF ASSOCIATED CIRCUITS USED IN INTERFACING The performance parameters of sample and hold circuits are defined correctly. The application of an analogue multiplexer to an ADC and a DAC is explained correctly. The principal of a bipolar ADC and a bipolar DAC are explained correctly. Parameters: d.c. offset; acquisition time; aperture time; droop; feed through. Written and graphical evidence of the candidate s knowledge and understanding of the operation of associated circuits used in interfacing, as specified in performance criteria to. 3
4 4. TEST DIGITAL TO ANALOGUE CONVERTERS AND ANALOGUE TO DIGITAL CONVERTERS AND DEMONSTRATE THE PRINCIPLE OF ALIASING (d) Digital to analogue converter is tested correctly in accordance with current manufacturer s data sheets. Analogue to digital converter is tested correctly in accordance with current manufacturer s data sheets. Shannon s sampling theorem is stated correctly. The relationship between sampling frequency and aliasing is demonstrated correctly. D/A converter test: nonmonoticity; differential nonlinearity; low error; high gain error; offset error. A/D converter test: missing codes; incorrect codes; offset. Written and performance evidence of the candidate s knowledge and ability to test D/A and A/D converters and demonstrate aliasing as detailed in performance criteria - (d). MERIT To gain a pass in this unit, a candidate must meet the standards set out in the outcomes, performance criteria, range statements and evidence requirements. To achieve a merit in this unit, a candidate must demonstrate a superior or more sophisticated level of performance. This may be demonstrated by: (i) (ii) a more in-depth explanation of theories; research outwith the course materials
5 ASSESSMENT In order to achieve this unit, candidates are required to present sufficient evidence that they have met all the performance criteria for each outcome within the range specified. Details of these requirements are given for each outcome. The assessment instruments used should follow the general guidance offered by the SQA assessment model and an integrative approach to assessment is encouraged. (See references at the end of support notes). Accurate records should be made of the assessment instruments used showing how evidence is generated for each outcome and giving marking schemes and/or checklists, etc. Records of candidates achievements should be kept. These records will be available for external verification. SPECIAL NEEDS Proposals to modify outcomes, range statements or agreed assessment arrangements should be discussed in the first place with the external verifier. Copyright SQA 1997 Please note that this publication may be reproduced in whole or in part for educational purposes provided that: (i) (ii) no profit is derived from the reproduction; if reproduced in part, the source is acknowledged. 5
6 HIGHER NATIONAL UNIT SPECIFICATION SUPPORT NOTES UNIT NUMBER: UNIT TITLE: D/A AND A/D CONVERTERS SUPPORT NOTES: This part of the unit specification is offered as guidance. None of the sections of the support notes is mandatory. NOTIONAL DESIGN LENGTH: SQA allocates a notional design length to a unit on the basis of time estimated for achievement of the stated standards by a candidate whose starting point is as described in the access statement. The notional design length for this unit is 40 hours. The use of notional design length for programme design and timetabling is advisory only. PURPOSE The purpose of this unit is to provide an introduction to the operation of analogue to digital and digital to analogue converters for applications which involve interfacing to microprocessor based systems. CONTENT/CONTEXT This unit is designed to develop competence in the operation of Analogue to Digital Convertor and Digital to Analogue Convertor and interfacing circuits. To provide underpinning knowledge to support HN units involving input/output interfacing. Corresponding to outcomes: Outcome 1 With BCD input each four bit group represents a decimal digit. For an eight bit convertor (two decimal digits) the BCD inputs can represent any decimal number from 0 to 99. Explanation of operation of R-2R ladder network may be based on the division of current in a circuit. Outcome 3 Bipolar input/output range may be obtained by the addition of an offset to the analogue input/output. Outcome 4 - A/D and D/A may be tested back to back. (d) Using a microcomputer and an analogue input/output program a sinusoidal signal of variable frequency may be continuously monitored and displayed. By increasing the input beyond that which produces two 6
7 samples per cycle a sinewave output may be displayed which is of a lower frequency than the input. APPROACHES TO GENERATING EVIDENCE This unit should be taught within a classroom and practical environment with access to a microprocessor based development systems. ASSESSMENT PROCEDURES Outcome 1 Structured questions are recommended for PC s, and. Outcome 2 A structured question is recommended for PC2. A structured question complete with the necessary diagrams is recommended for PC 2. Outcome 3 Structured questions are recommended for PC s 3, 3 and 3. Outcome 4 May be assessed by means of a report on practical circuit tests for PC s 4 and 4. PC 4 and 4(d) may be assessed by means of a report on a practical demonstration utilising supplied software. PROGRESSION This unit may lead on to the following HN unit Engineering Programming: I Hardware Control. REFERENCES 1. Guide to unit writing. 2. For a fuller discussion on assessment issues, please refer to SQA s Guide to Assessment. 3. Information for centres on SQA s operating procedures is contained in SQA s Guide to Procedures. 4. For details of other SQA publications, please consult SQA s publications list. Copyright SQA 1997 Please note that this publication may be reproduced in whole or in part for educational purposes provided that: (i) (ii) no profit is derived from the reproduction; if reproduced in part, the source is acknowledged. 7
-SQA-SCOTTISH QUALIFICATIONS AUTHORITY NATIONAL CERTIFICATE MODULE: UNIT SPECIFICATION GENERAL INFORMATION. -Module Number Session
-SQA-SCOTTISH QUALIFICATIONS AUTHORITY NATIONAL CERTIFICATE MODULE: UNIT SPECIFICATION GENERAL INFORMATION -Module Number- 7290946 -Session-1996-97 -Superclass- LH -Title- MUSIC MAKING: SOLO (SCOTTISH
More information-SQA-SCOTTISH QUALIFICATIONS AUTHORITY. Hanover House 24 Douglas Street GLASGOW G2 7NQ NATIONAL CERTIFICATE MODULE DESCRIPTOR
-SQA-SCOTTISH QUALIFICATIONS AUTHORITY Hanover House 24 Douglas Street GLASGOW G2 7NQ NATIONAL CERTIFICATE MODULE DESCRIPTOR -Module Number- 7130011 -Session-1991-92 -Superclass- CY -Title- CLASSIFICATION
More informationHigher National Unit Specification. General information for centres. Music Sequencing and Programming. Unit code: DJ2Y 34
Higher National Unit Specification General information for centres Unit title: Music Sequencing and Programming Unit code: DJ2Y 34 Unit purpose: This unit should give the candidate an understanding of
More informationThis Unit is a mandatory Unit within the National Certificate in Music (SCQF level 6), but can also be taken as a free-standing Unit.
National Unit Specification: general information CODE F58L 11 SUMMARY This Unit is designed to enable candidates to develop aural discrimination skills through listening to music. Candidates will be required
More informationHigher National Unit Specification. General information for centres. Unit title: Keyboard Skills for Music Production. Unit code: DJ28 33
Higher National Unit Specification General information for centres Unit code: DJ28 33 Unit purpose: This Unit is designed to enable candidates to develop and implement the use of keyboard skills as a creative
More informationUnit title: Music First Study: Composition (SCQF level 7)
Higher National Unit Specification General information Unit code: J01J 34 Superclass: LF Publication date: May 2018 Source: Scottish Qualifications Authority Version: 01 Unit purpose This unit will provide
More information1 National Unit credit at SCQF level 4: (6 SCQF credit points at SCQF level 4*)
National Unit specification: general information Unit code: H296 10 Superclass: LF Publication date: August 2012 Source: Scottish Qualifications Authority Version: 01 Summary This Unit will introduce candidates
More informationMusic History: Genres, Record Labels and Artists (SCQF level 7)
Higher National Unit Specification General information Unit code: J00X 34 Superclass: LK Publication date: April 2018 Source: Scottish Qualifications Authority Version: 01 Unit purpose This unit is intended
More information1 Describe the way that sound and music are used to support different mediums. 2 Design and create soundtracks to support different mediums.
National Unit Specification: general information CODE F5DY 12 SUMMARY The purpose of this Unit is to introduce candidates to the supporting role of sound and music in narrative and image for a variety
More information1 Higher National Unit credit at SCQF level 8 (8 SCQF credit points at SCQF level 8)
Higher National Unit Specification General information Unit code: J0N3 35 Superclass: LF Publication date: August 2018 Source: Scottish Qualifications Authority Version: 02 Unit purpose This unit is designed
More informationThis Unit may form part of a National Qualification Group Award or may be offered on a free standing basis.
National Unit Specification: general information CODE F5JJ 11 SUMMARY The Unit is intended for candidates with little or no prior knowledge of Analogue or Digital Electronic Circuits. It provides an opportunity
More information2 Higher National Unit credits at SCQF level 7: (16 SCQF credit points at SCQF level 7)
Higher National Unit Specification General information Unit code: J01M 34 Superclass: LH Publication date: May 2018 Source: Scottish Qualifications Authority Version: 01 Unit purpose This unit is designed
More information1 Higher National Unit credit at SCQF level 7: (8 SCQF credit points at SCQF level 7)
Higher National Unit specification General information Unit code: H1M7 34 Superclass: LF Publication date: October 2015 Source: Scottish Qualifications Authority Version: 02 Unit purpose The focus of this
More informationWINTER 15 EXAMINATION Model Answer
Important Instructions to examiners: 1) The answers should be examined by key words and not as word-to-word as given in the model answer scheme. 2) The model answer and the answer written by candidate
More informationConverters: Analogue to Digital
Converters: Analogue to Digital Presented by: Dr. Walid Ghoneim References: Process Control Instrumentation Technology, Curtis Johnson Op Amps Design, Operation and Troubleshooting. David Terrell 1 - ADC
More informationHigher National Unit Specification. General information. Unit title: Music: Songwriting (SCQF level 7) Unit code: J0MN 34. Unit purpose.
Higher National Unit Specification General information Unit code: J0MN 34 Superclass: LF Publication date: August 2018 Source: Scottish Qualifications Authority Version: 02 Unit purpose This unit is designed
More informationInterfacing Analog to Digital Data Converters. A/D D/A Converter 1
Interfacing Analog to Digital Data Converters A/D D/A Converter 1 In most of the cases, the PPI 8255 is used for interfacing the analog to digital converters with microprocessor. The analog to digital
More informationDecade Counters Mod-5 counter: Decade Counter:
Decade Counters We can design a decade counter using cascade of mod-5 and mod-2 counters. Mod-2 counter is just a single flip-flop with the two stable states as 0 and 1. Mod-5 counter: A typical mod-5
More informationHistory of Stringed Musical Instruments: Medieval to Baroque (SCQF level 5)
National Unit specification: general information Unit code: FX3J 11 Superclass: LJ Publication date: October 2011 Source: Scottish Qualifications Authority Version: 01 Summary The purpose of the Unit is
More information2 Higher National Unit credits at SCQF level 8: (16 SCQF credit points at SCQF level 8)
Higher National Unit Specification General information Unit code: J01N 35 Superclass: LH Publication date: May 2018 Source: Scottish Qualifications Authority Version: 01 Unit purpose This unit is designed
More informationHigher National Unit Specification. General information. Unit title: Music Theory (SCQF level 8) Unit code: J0MX 35. Unit purpose.
Higher National Unit Specification General information Unit code: J0MX 35 Superclass: LF Publication date: June 2018 Source: Scottish Qualifications Authority Version: 01 Unit purpose This unit is designed
More informationLab 1 Introduction to the Software Development Environment and Signal Sampling
ECEn 487 Digital Signal Processing Laboratory Lab 1 Introduction to the Software Development Environment and Signal Sampling Due Dates This is a three week lab. All TA check off must be completed before
More informationDigital Fundamentals. Introduction to Digital Signal Processing
Digital Fundamentals Introduction to Digital Signal Processing 1 Objectives List the essential elements in a digital signal processing system Explain how analog signals are converted to digital form Discuss
More informationExperiment 2: Sampling and Quantization
ECE431, Experiment 2, 2016 Communications Lab, University of Toronto Experiment 2: Sampling and Quantization Bruno Korst - bkf@comm.utoronto.ca Abstract In this experiment, you will see the effects caused
More informationAnalog Input & Output
EEL 4744C: Microprocessor Applications Lecture 10 Part 1 Analog Input & Output Dr. Tao Li 1 Read Assignment M&M: Chapter 11 Dr. Tao Li 2 To process continuous signals as functions of time Advantages free
More informationHigher National Unit specification: general information
Higher National Unit specification: general information Unit code: H1M8 35 Superclass: LF Publication date: June 2012 Source: Scottish Qualifications Authority Version: 01 Unit purpose This Unit is designed
More informationArrangements for: SQA Advanced Certificate in Musical Theatre. at SCQF level 7. Group Award Code: GP2P 47. Date of publication: August 2018
Arrangements for: SQA Advanced Certificate in Musical Theatre at SCQF level 7 Group Award Code: GP2P 47 Date of publication: August 2018 Version: 01 History of changes It is anticipated that changes will
More informationMIE 402: WORKSHOP ON DATA ACQUISITION AND SIGNAL PROCESSING Spring 2003
MIE 402: WORKSHOP ON DATA ACQUISITION AND SIGNAL PROCESSING Spring 2003 OBJECTIVE To become familiar with state-of-the-art digital data acquisition hardware and software. To explore common data acquisition
More informationPERFORMING ARTS. Unit 29 Musicianship Suite. Cambridge TECHNICALS LEVEL 3. F/507/6840 Guided learning hours: 60. ocr.org.
2016 Suite Cambridge TECHNICALS LEVEL 3 PERFORMING ARTS Unit 29 Musicianship F/507/6840 Guided learning hours: 60 Version 1 September 2015 ocr.org.uk/performingarts LEVEL 3 UNIT 29: Musicianship F/507/6840
More informationSQA Advanced Unit specification. General information for centres. Unit title: Philosophical Aesthetics: An Introduction. Unit code: HT4J 48
SQA Advanced Unit specification General information for centres Unit title: Philosophical Aesthetics: An Introduction Unit code: HT4J 48 Unit purpose: This Unit aims to develop knowledge and understanding
More informationArrangements for: National Progression Award in. Music Business (SCQF level 6) Group Award Code: G9KN 46. Validation date: November 2009
Arrangements for: National Progression Award in Music Business (SCQF level 6) Group Award Code: G9KN 46 Validation date: November 2009 Date of original publication: January 2010 Version: 03 (August 2011)
More informationMinnesota State College Southeast
ELEC 2211: Digital Electronics II A. COURSE DESCRIPTION Credits: 4 Lecture Hours/Week: 2 Lab Hours/Week: 4 OJT Hours/Week: *.* Prerequisites: None Corequisites: None MnTC Goals: None Minnesota State College
More informationArrangements for: National Certificate in Music. at SCQF level 5. Group Award Code: GF8A 45. Validation date: June 2012
Arrangements for: National Certificate in Music at SCQF level 5 Group Award Code: GF8A 45 Validation date: June 2012 Date of original publication: December 2012 Version: 4 (December 2017) Acknowledgement
More informationData Converter Overview: DACs and ADCs. Dr. Paul Hasler and Dr. Philip Allen
Data Converter Overview: DACs and ADCs Dr. Paul Hasler and Dr. Philip Allen The need for Data Converters ANALOG SIGNAL (Speech, Images, Sensors, Radar, etc.) PRE-PROCESSING (Filtering and analog to digital
More informationMAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION (Autonomous) (ISO/IEC Certified)
Important Instructions to examiners: 1) The answers should be examined by key words and not as word-to-word as given in the model answer scheme. 2) The model answer and the answer written by candidate
More informationWINTER 14 EXAMINATION
Subject Code: 17320 WINTER 14 EXAMINATION Model Answer Important Instructions to examiners: 1) The answers should be examined by key words and not as word-to-word as given in the model answer scheme. 2)
More informationlevel 4 (6 SCQF credit points)
Music Performance (National 4) SCQF: level 4 (6 SCQF credit points) Unit code: H242 74 Unit outline This is the Added Value Unit in the National 4 Music Course. The general aim of this Unit is to enable
More informationLab 2: A/D, D/A, and Sampling Theorem
Lab 2: A/D, D/A, and Sampling Theorem Introduction The purpose of this lab is to explore the principles of analog-to-digital conversion, digital-to-analog conversion, and the sampling theorem. It will
More informationArrangements for: National Progression Award in. Music Performing (SCQF level 6) Group Award Code: G9L6 46. Validation date: November 2009
Arrangements for: National Progression Award in Music Performing (SCQF level 6) Group Award Code: G9L6 46 Validation date: November 2009 Date of original publication: January 2010 Version 02 (September
More informationTRAINING KITS ON DIGITAL ELECTRONIC EXPERIMENTS. Verify Truth table for TTL IC s AND, NOT, & NAND GATES
TRAINING KITS ON DIGITAL ELECTRONIC EXPERIMENTS CEE 2800 Basic Logic Gates using TTL IC's (7 in 1) To verify the truth table For TTL AND, OR. NOT, NAND,NOR, EX-OR, & EX-NOR Gates. Instrument comprises
More informationECE 4220 Real Time Embedded Systems Final Project Spectrum Analyzer
ECE 4220 Real Time Embedded Systems Final Project Spectrum Analyzer by: Matt Mazzola 12222670 Abstract The design of a spectrum analyzer on an embedded device is presented. The device achieves minimum
More informationMICROLINK 304x A-D Converter User Manual
MICROLINK 304x A-D Converter User Manual Biodata Limited Manual Code: M3000-3.2 Issue Date: December 1998 Information in this document is subject to change without notice. Updates are listed on our web
More informationDual Slope ADC Design from Power, Speed and Area Perspectives
Dual Slope ADC Design from Power, Speed and Area Perspectives Isaac Macwan, Xingguo Xiong, Lawrence Hmurcik Department of Electrical & Computer Engineering, University of Bridgeport, Bridgeport, CT 06604
More informationMAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION (Autonomous) (ISO/IEC Certified) WINTER 2018 EXAMINATION MODEL ANSWER
Important Instructions to examiners: 1) The answers should be examined by key words and not as word-to-word as given in themodel answer scheme. 2) The model answer and the answer written by candidate may
More information4.S-[F] SU-02 June All Syllabus Science Faculty B.Sc. II Yr. Instrumentation Practice [Sem.III & IV] S.Lot
[Sem.III & IV] S.Lot. - 1 - [Sem.III & IV] S.Lot. - 2 - [Sem.III & IV] S.Lot. - 3 - Syllabus B.Sc. ( Instrumentation Practice ) Second Year ( Third and Forth Semester ) ( Effective from June 2014 ) [Sem.III
More informationData Conversion and Lab (17.368) Fall Lecture Outline
Data Conversion and Lab (17.368) Fall 2013 Lecture Outline Class # 11 November 14, 2013 Dohn Bowden 1 Today s Lecture Outline Administrative Detailed Technical Discussions Lab Microcontroller and Sensors
More informationScottish Bagpipe Theory: Practice Chanter. SCQF level 2. Unit Code: F7NT hour Unit
Scottish Bagpipe Theory: Practice Chanter SCQF level 2 Unit Code: F7NT 08 40 hour Unit What are the Scottish Bagpipe Qualifications? These are Scotland s Piping and Drumming Qualifications Board (PDQB)
More informationDigital Signal. Continuous. Continuous. amplitude. amplitude. Discrete-time Signal. Analog Signal. Discrete. Continuous. time. time.
Discrete amplitude Continuous amplitude Continuous amplitude Digital Signal Analog Signal Discrete-time Signal Continuous time Discrete time Digital Signal Discrete time 1 Digital Signal contd. Analog
More informationQuestion Bank. Unit 1. Digital Principles, Digital Logic
Question Bank Unit 1 Digital Principles, Digital Logic 1. Using Karnaugh Map,simplify the following boolean expression and give the implementation of the same using i)nand gates only(sop) ii) NOR gates
More informationDigital Systems Principles and Applications. Chapter 1 Objectives
Digital Systems Principles and Applications TWELFTH EDITION CHAPTER 1 Introductory Concepts Modified -J. Bernardini Chapter 1 Objectives Distinguish between analog and digital representations. Describe
More informationEECS 373 Design of Microprocessor-Based Systems
EECS 373 Design of Microprocessor-Based Systems A day of Misc. Topics Mark Brehob University of Michigan Lecture 12: Finish up Analog and Digital converters Finish design rules Quick discussion of MMIO
More information'if it was so, it might be; and if it were so, it would be: but as it isn't, it ain't. That's logic'
Basic Digital Electronics 'Contrariwise,' continued Tweedledee, 'if it was so, it might be; and if it were so, it would be: but as it isn't, it ain't. That's logic' (Carroll: Alice Through the Looking
More informationIntegrated Circuit for Musical Instrument Tuners
Document History Release Date Purpose 8 March 2006 Initial prototype 27 April 2006 Add information on clip indication, MIDI enable, 20MHz operation, crystal oscillator and anti-alias filter. 8 May 2006
More informationTHE KENYA POLYTECHNIC
THE KENYA POLYTECHNIC ELECTRICAL/ELECTRONICS ENGINEERING DEPARTMENT HIGHER DIPLOMA IN ELECTRICAL ENGINEERING END OF YEAR II EXAMINATIONS NOVEMBER 006 DIGITAL ELECTRONICS 3 HOURS INSTRUCTIONS TO CANDIDATES:
More informationTheory Lecture Day Topic Practical Day. Week. number systems and their inter-conversion Decimal, Binary. 3rd. 1st. 1st
Lesson Plan Name of the Faculty : Priyanka Nain Discipline: Electronics & Communication Engg. Semester:5th Subject:DEMP Lesson Plan Duration: 15 Weeks Work Load(Lecture/Practical) per week (In Hours):
More informationDigital Electronics II 2016 Imperial College London Page 1 of 8
Information for Candidates: The following notation is used in this paper: 1. Unless explicitly indicated otherwise, digital circuits are drawn with their inputs on the left and their outputs on the right.
More information1 Hour Sample Test Papers: Sample Test Paper 1. Roll No.
6.1.2 Sample Test Papers: Sample Test Paper 1 Roll No. Institute Name: Course Code: EJ/EN/ET/EX/EV/IC/IE/IS/MU/DE/ED/ET/IU Subject: Principles of Digital Techniques Marks: 25 1 Hour 1. All questions are
More informationElements of Sound and Music Computing in A-Level Music and Computing/CS Richard Dobson, January Music
Elements of Sound and Music Computing in A-Level Music and Computing/CS Richard Dobson, January 2013 Music These extracts suggest that the exam boards fall into two broad groups. Some detail extensive
More informationScottish Bagpipe Solo Performance: Practice Chanter
Scottish Bagpipe Solo Performance: Practice Chanter SCQF level 2 Unit Code: F7NS 08 40 hour Unit What are the Scottish Bagpipe Qualifications? These are Scotland s Piping and Drumming Qualifications Board
More informationINDIAN INSTITUTE OF TECHNOLOGY KHARAGPUR NPTEL ONLINE CERTIFICATION COURSE. On Industrial Automation and Control
INDIAN INSTITUTE OF TECHNOLOGY KHARAGPUR NPTEL ONLINE CERTIFICATION COURSE On Industrial Automation and Control By Prof. S. Mukhopadhyay Department of Electrical Engineering IIT Kharagpur Topic Lecture
More informationINF4420 Project Spring Successive Approximation Register (SAR) Analog-to-Digital Converter (ADC)
INF4420 Project Spring 2011 Successive Approximation Register (SAR) Analog-to-Digital Converter (ADC) 1. Introduction Data converters are one of the fundamental building blocks in integrated circuit design.
More informationNanoGiant Oscilloscope/Function-Generator Program. Getting Started
Getting Started Page 1 of 17 NanoGiant Oscilloscope/Function-Generator Program Getting Started This NanoGiant Oscilloscope program gives you a small impression of the capabilities of the NanoGiant multi-purpose
More informationNirma University Institute of Technology. Electronics and Communication Engineering Department. Course Policy
Nirma University Institute of Technology Electronics and Communication Engineering Department Course Policy B. Tech Semester - III Academic Year: 2017 Course Code & Name : Credit Details : L T P C 4 2
More informationANALOGUE AND DIGITAL ELECTRONICS STUDENT S WORKBOOK U1: INTRODUCTION
ANALOGUE AND DIGITAL ELECTRONICS STUDENT S WORKBOOK U1: INTRODUCTION Joaquim Crisol Llicència D, Generalitat de Catalunya NILE Norwich, April of 2011 Table of contents Table of contents 1 INTRODUCTION
More informationBell. Program of Study. Accelerated Digital Electronics. Dave Bell TJHSST
Program of Study Accelerated Digital Electronics TJHSST Dave Bell Course Selection Guide Description: Students learn the basics of digital electronics technology as they engineer a complex electronic system.
More informationPRACTICAL DESIGN TECHNIQUES FOR SENSOR SIGNAL CONDITIONING
PRACTICAL DESIGN TECHNIQUES FOR SENSOR SIGNAL CONDITIONING INTRODUCTION - BRIDGE CIRCUITS - AMPLIFIERS FOR SIGNAL CONDITIONING - STRAIN, FORCE, PRESSURE, AND FLOW MEASUREMENTS - HIGH IMPEDANCE SENSORS
More informationExperiment # 5. Pulse Code Modulation
ECE 416 Fall 2002 Experiment # 5 Pulse Code Modulation 1 Purpose The purpose of this experiment is to introduce Pulse Code Modulation (PCM) by approaching this technique from two individual fronts: sampling
More informationInstallation / Set-up of Autoread Camera System to DS1000/DS1200 Inserters
Installation / Set-up of Autoread Camera System to DS1000/DS1200 Inserters Written By: Colin Langridge Issue: Draft Date: 03 rd July 2008 1 Date: 29 th July 2008 2 Date: 20 th August 2008 3 Date: 02 nd
More information10-Channel 16-Bit Analog Board Set User s Manual And Troubleshooting Guide
10-Channel 16-Bit Analog Board Set User s Manual And Troubleshooting Guide March 16, 2011 Rev. C Moog Components Group Springfield Operations 750 West Sproul Road Springfield, PA 19064 E-Mail: mcg@moog.com
More informationDo the following: a. (12 points) Draw a block diagram of your circuit design, showing and labeling all essential components and connections.
UNIVERSITY OF CALIFORNIA College of Engineering Electrical Engineering and Computer Sciences Department EECS 145M: Microcomputer Interfacing Laboratory Spring Midterm #1 (Closed book- calculators OK) Wednesday,
More informationScottish Pipe Band Drumming Performance. SCQF level 6. Unit Code: F7NJ hour Unit
Scottish Pipe Band Drumming Performance SCQF level 6 Unit Code: F7NJ 12 80 hour Unit What are the Scottish Pipe Band Drumming Qualifications? These are Scotland s Piping and Drumming Qualifications Board
More informationScottish Bagpipe Solo Performance: Practice Chanter
Scottish Bagpipe Solo Performance: Practice Chanter SCQF level 3 Unit Code: F7NY 09 40 hour Unit What are the Scottish Bagpipe Qualifications? These are Scotland s Piping and Drumming Qualifications Board
More informationTIME SCHEDULE. MODULE TOPICS PERIODS 1 Number system & Boolean algebra 17 Test I 1 2 Logic families &Combinational logic
COURSE TITLE : DIGITAL INSTRUMENTS PRINCIPLE COURSE CODE : 3075 COURSE CATEGORY : B PERIODS/WEEK : 4 PERIODS/SEMESTER : 72 CREDITS : 4 TIME SCHEDULE MODULE TOPICS PERIODS 1 Number system & Boolean algebra
More informationScottish Pipe Band Drumming Performance. SCQF level 4. Unit Code: F7NM hour Unit
Scottish Pipe Band Drumming Performance SCQF level 4 Unit Code: F7NM 10 80 hour Unit What are the Scottish Pipe Band Drumming Qualifications? These are Scotland s Piping and Drumming Qualifications Board
More information2011 Computing Studies. Standard Grade Credit. Finalised Marking Instructions
0 Computing Studies Standard Grade Credit Finalised ing Instructions Scottish Qualifications Authority 0 The information in this publication may be reproduced to support SQA qualifications only on a non-commercial
More informationInstructions and answers for teachers
Unit 7: Electrical devices LO3: Understand how to use signal conditioning techniques and signal conversion devices Digital to Analogue conversion the R-2R ladder Instructions and answers for teachers These
More informationHow smart dimming technologies can help to optimise visual impact and power consumption of new HDR TVs
How smart dimming technologies can help to optimise visual impact and power consumption of new HDR TVs David Gamperl Resolution is the most obvious battleground on which rival TV and display manufacturers
More informationIntroduction to Mechatronics. Fall Instructor: Professor Charles Ume. Analog to Digital Converter
ME6405 Introduction to Mechatronics Fall 2006 Instructor: Professor Charles Ume Analog to Digital Converter Analog and Digital Signals Analog signals have infinite states available mercury thermometer
More informationAdding Analog and Mixed Signal Concerns to a Digital VLSI Course
Session Number 1532 Adding Analog and Mixed Signal Concerns to a Digital VLSI Course John A. Nestor and David A. Rich Department of Electrical and Computer Engineering Lafayette College Abstract This paper
More informationm RSC Chromatographie Integration Methods Second Edition CHROMATOGRAPHY MONOGRAPHS Norman Dyson Dyson Instruments Ltd., UK
m RSC CHROMATOGRAPHY MONOGRAPHS Chromatographie Integration Methods Second Edition Norman Dyson Dyson Instruments Ltd., UK THE ROYAL SOCIETY OF CHEMISTRY Chapter 1 Measurements and Models The Basic Measurements
More informationMODULE TITLE : PROGRAMMABLE LOGIC CONTROLLERS TOPIC TITLES : PROGRAMMABLE FACILITIES AND ADDITIONAL FACILITIES TUTOR MARKED ASSIGNMENT 3
THIS BOX MUST BE COMPLETED Student Code No.... Student's Signature... Date Submitted... Contact e-mail... MODULE TITLE : PROGRAMMABLE LOGIC CONTROLLERS TOPIC TITLES : PROGRAMMABLE FACILITIES AND ADDITIONAL
More informationUNIT V 8051 Microcontroller based Systems Design
UNIT V 8051 Microcontroller based Systems Design INTERFACING TO ALPHANUMERIC DISPLAYS Many microprocessor-controlled instruments and machines need to display letters of the alphabet and numbers. Light
More informationSensor Development for the imote2 Smart Sensor Platform
Sensor Development for the imote2 Smart Sensor Platform March 7, 2008 2008 Introduction Aging infrastructure requires cost effective and timely inspection and maintenance practices The condition of a structure
More informationLABORATORY 14: ANALOG TO DIGITAL CONVERSION USING ADC0809
LABORATORY 14: ANALOG TO DIGITAL CONVERSION USING ADC0809 NAME: STUDENT ID#: Objectives To understand how the ADC0809 works for analog-to-digital signal conversion. To program loop tests for analog-to-digital
More informationNC Eng Systems. Block Diagrams. Learning Outcome 1. MjD
NC Eng Systems Learning Outcome 1 Block Diagrams MjD Sep 2013 Block diagrams are a type of tool used by engineers to help them describe or visualise the way that an Engineering System works or operates.
More informationScottish Bagpipe Solo Performance: Bagpipes. SCQF level 5. Unit Code: F7P hour Unit
Scottish Bagpipe Solo Performance: Bagpipes SCQF level 5 Unit Code: F7P3 11 80 hour Unit What are the Scottish Bagpipe Qualifications? These are Scotland s Piping and Drumming Qualifications Board (PDQB)
More informationOperating Manual Ver.1.1
Johnson Counter Operating Manual Ver.1.1 An ISO 9001 : 2000 company 94-101, Electronic Complex Pardesipura, Indore- 452010, India Tel : 91-731- 2570301/02, 4211100 Fax: 91-731- 2555643 e mail : info@scientech.bz
More informationOperating Manual Ver.1.1
Event Counter Operating Manual Ver.1.1 An ISO 9001 : 2000 company 94-101, Electronic Complex Pardesipura, Indore- 452010, India Tel : 91-731- 2570301/02, 4211100 Fax: 91-731- 2555643 e mail : info@scientech.bz
More informationScottish Bagpipe Solo Performance: Bagpipes. SCQF level 4. Unit Code: F7P hour Unit
Scottish Bagpipe Solo Performance: Bagpipes SCQF level 4 Unit Code: F7P1 10 80 hour Unit What are the Scottish Bagpipe Qualifications? These are Scotland s Piping and Drumming Qualifications Board (PDQB)
More informationArrangements for: National Progression Award in Contemporary Gaelic Songwriting and Production. at SCQF level 5. Group Award Code: GC7Y 45
Arrangements for: National Progression Award in Contemporary Gaelic Songwriting and Production at SCQF level 5 Group Award Code: GC7Y 45 Validation date: June 2011 Date of original publication: June 2011
More informationB. Sc. III Semester (Electronics) - ( ) Digital Electronics-II) BE-301 MODEL ANSWER (AS-2791)
B. Sc. III Semester (Electronics) - (2013-14) Digital Electronics-II) BE-301 MODEL ANSWER (AS-2791) Section-[A] i. (B) ii. (A) iii. (D) iv. (C) v. (C) vi. (C) vii. (D) viii. (B) Ans-(ix): In JK flip flop
More informationOverview of All Pixel Circuits for Active Matrix Organic Light Emitting Diode (AMOLED)
Chapter 2 Overview of All Pixel Circuits for Active Matrix Organic Light Emitting Diode (AMOLED) ---------------------------------------------------------------------------------------------------------------
More informationScottish Pipe Band Drumming Music Theory. SCQF level 6. Unit Code: F7NK hour Unit
Scottish Pipe Band Drumming Music Theory SCQF level 6 Unit Code: F7NK 12 40 hour Unit What are the Scottish Pipe Band Drumming Qualifications? These are Scotland s Piping and Drumming Qualifications Board
More informationTrial version. Analogue to Digital Conversion in Distance Measurement
Analogue to Digital Conversion in Distance Measurement How is an analogue to digital conversion of a distance measurement made and how accurate is it? Analogue to Digital Conversion in Distance Measurement
More informationExperiment: FPGA Design with Verilog (Part 4)
Department of Electrical & Electronic Engineering 2 nd Year Laboratory Experiment: FPGA Design with Verilog (Part 4) 1.0 Putting everything together PART 4 Real-time Audio Signal Processing In this part
More informationWe bring quality to light. SNT 10 DC Power Supply
We bring quality to light. SNT 10 DC Power Supply State-of-the-art choice for a reliable, high power DC supply The SNT 10 DC Power Supply is a precision tool developed to meet the needs of the automotive
More informationForm C: Type Test Verification Report
Form C: Type Test Verification Report Type Approval and Manufacturer declaration of compliance with the requirements of G98. This form should be used when making a Type Test submission to the Energy Networks
More informationForm C: Type Test Verification Report
Form C: Type Test Verification Report Type Approval and Manufacturer declaration of compliance with the requirements of G98. This form should be used when making a Type Test submission to the Energy Networks
More informationIntroduction to Digital Signal Processing (DSP)
Introduction to Digital Processing (DSP) Elena Punskaya www-sigproc.eng.cam.ac.uk/~op205 Some material adapted from courses by Prof. Simon Godsill, Dr. Arnaud Doucet, Dr. Malcolm Macleod and Prof. Peter
More informationChapter 11 Sections 1 3 Dr. Iyad Jafar
Data Acquisition and Manipulation Chapter 11 Sections 1 3 Dr. Iyad Jafar Outline Analog and Digital Quantities The Analog to Digital Converter Features of Analog to Digital Converter The Data Acquisition
More information