WE CREATE REALITY - BUT LOOK INTO THE FUTURE BITSTREAM PRODUCER OF EQUIPMENT FOR DATA TELECOMMUNICATION NETWORKS
TELECOM SOLUTIONS Optical multiplexers (E1/E3/ISDN BRI + over fiber) Family of optical multiplexers offered by BitStream company provides cost-effective and efficient transport of multiple E1, ISDN BRI or E3 transmission channels and data stream over fiber optic links. Enterprises need voice (companies' s) and data ( network) connectivity to public switched telephone network, packet network (Internet) and between their branches. Such connections carried on E1 or ISDN BRI connections can be easily realized using fiber optic multiplexers. Remote Branch Central Site Remote Branch TYTAN-16E1: 16xE1 G.703 2048kbit/s + 4Gbit/s / FO with optical path redundancy and LCD dispplay PSN Optical line interface TYTAN-16E1 GFOX-4E1-SFP MEGAFOX FOBOS-II OBERON CERES TELESTO FIB-E3 PSTN SM, MM FO (optional optical path protection) 8/16x E1, 4Gbit/s (4x RJ45, 3x SFP) 4x E1, 1Gbit/s (4x RJ45) 8x E1, 100Mbit/s (4x RJ45) 4x E1, 100Mbit/s (4x RJ45, 1x SFP) 4x E1, 100Mbit/s (4x RJ45) 1x E1, 100Mbit/s (4x RJ45) 4x ISDN BRI, 100Mbit/s (4x RJ45) 1x E3, 100Mbit/s (4x RJ45) 2x 3,125 Gbit/s SFP (optical path redundancy) 1,25 Gbit/s SFP (optional redundancy) over E1/E3 multiplexers/s Inverse multiplexers and interface s offered by BitStream company provide cost-effective transportation of /IP services over PDH/ infrastructure or microwave links with E1 interfaces. Our products allow connection of electrical and optical interfaces using up to sixteen E1 channels aggregating their band. Leveraging widely available TDM networks enable to cost-effectively reduce time-to-market and set-up costs for offering IP services to customers. MEGAMUX-4EN: over 4xE1 G.703/G.704 Inverse Multiplexer and Concentrator (collects traffic from different s connected by 1-4 E1 channels) working modes (E3) Customer site PDH/ network (E3) Packet Switched Network (E3) Customer site Line interface (4x RJ45, 2x SFP) Fast (4x RJ45) Fast (4x RJ45) Fast (4x RJ45) MEGAMUX-8/16EN MEGAMUX-4EN ANYMUX-E1 ANYMUX-E3 8/16x E1 G.703 4x E1 G.703/G.704 1x E1 G.703/G.704 1x E3 G.703 TDM over IP multiplexers Bitstream company offers TDM over IP multiplexer that can be used to transmit transparently up to four E1 streams over /IP/TDM network and regenerate clock of TDM transmission using adaptive timing algorithm. In some situations connections must be provided in a locations where TDM network is not available. The efficient way to do it is by using pseudo-wire technology. 4 E1 channels GIGABIT ETHERNET 4 E1 channels PSTN 4 E1 channels CHIRON-4E1: 4xE1 over Multiplexer (TDM over IP), built-in switch (4x RJ45 + 1x SFP) CHIRON-4E1 Line interface 4x E1 G.703 (4x RJ45 + 1x SFP)
ENERGETICS, INDUSTRIAL NETWORK Industrial multi-service switches Industrial switches offered by BitStream company, besides enhanced switching capabilities, provide set of additional fatures like wireless management using GPRS modems and virtual COM, making them perfect solution for Smart Grid, Scada and other mission-critical industrial applications. HYPERION-302-1 HYPERION-301-1 HYPERION-302-2 HYPERION-301-2 HYPERION-302-3 HYPERION-302-3 HYPERION-101-1 HYPERION-101-2 GPRS modem wireless management Recovery time < 20ms 2x 10/100/1000Mbit/s RJ45, 8x 100/1000Mbit/s SFP slot, 8x 10/100/1000Mbit/s RJ45, 2x 100/1000Mbit/s SFP slot, 2x 10/100/1000Mbit/s RJ45, 8x 100/1000Mbit/s SFP slot, 1x relay output, 1x relay input 8x 10/100/1000Mbit/s RJ45, 2x 100/1000Mbit/s SFP slot, 1x relay output, 1x relay input 2x 10/100/1000Mbit/s RJ45, 8x 100/1000Mbit/s SFP slot, 2x RS232 (GPRS modems support), 1x RS232/485 (virtual COM), 1-wire, 4x relay outputs, 1x relay input 8x 10/100/1000Mbit/s RJ45,3x 100/1000Mbit/s SFP slot, 2x RS232 (GPRS modems support), 1x RS232/485 (virtual COM), 1-wire, 4x relay outputs, 1x relay input 2x 10/100/1000Mbit/s RJ45, 6x 1000Mbit/s SFP slot, 2x 10/100/1000Mbit/s RJ45, 6x 1000Mbit/s SFP slot, 1x relay output, 1x relay input, 1-wire Smart grid solutions incorporate intelligent secondary substations responsible for (besides MV/LV voltage transforming), collecting data and providing real time informations about network status. Reliable, continous communication with operating center within aforementioned locations is a must. HYPERION-302-3: 10-Port Managed Switch combining 8x SFP slots, 2x RJ45 ports, serial RS232/485 interfaces (with the capability of GPRS modems support), digital inputs/outputs, 1-Wire RS232/422/485 optical s and multiplexers RS232/485 optical s and multiplexers transparently interconnect multiple devices fitted with up to four RS-232 or RS-485 interfaces over fiber links in point to point, ring and bus topologies. SCADA SERVER RS232/485 optical multiplexers can provide galvanically isolated connectivity of PCUs and RTUs with SCADA servers over greater distance than electrical wiring. Optical line interface RSMUX2-FO BS-MC-90 BS-MC-80 4x RS232/485 1x RS232/485 1x RS232/485 (or CAN) + 100Mbit/s 1/2x 155 Mbit/s SC 155 Mbit/s SFP RSMUX2-FO-P: 4x 232/422/485 over fiber multiplexer, two optical interfaces (rings, bus and point to point with protection modes) Low-rate optical s and multiplexers Low-rate optical s and multiplexers can transmit up to four multimode RS232, 820/850nm optical signals used by protection relays (differential, distance, voltage, frequency, protection) over SM/MM/CWDM/DWDM fiber optical path. Protection relay Electrical MM FO 820/850nm SM, MM, CWDM, DWDM FO (optional optical path protection) MM FO 820/850nm Protection relay Electrical Protection relays commonly used in electrical substations operates at low bit-rates. BitStream s optical devices can be used to provide conversion of such signals. Optical line interface BS-MC-50 BS-MX-150 1x 820/850nm, 0-1,5Mbit/s, ST 4x 820/850nm, 0-1,5Mbit/s, ST 1/2x 155 Mbit/s SFP (SM, MM, CWDM, DWDM) 1/2x 155 Mbit/s SFP (SM, MM, CWDM, DWDM)
TRANSMISSION SOLUTIONS CWDM and DWDM multiplexers BitStream offers wide range of managed and unmanaged CWDM and DWDM multiplexers allowing customer to transmit up to 18 CWDM channels over dual fiber, up to 8 channels over single fiber and to add/drop up to 8 channels from CWDM link. While using BitStream s managed CWDM multiplexer operator has the ability to configure thresholds for line interface. When optical power goes out of configured threshold range, device will notify the operator via email, SNMP trap and WWW alert. Additional 1650nm filtered port allow user to directly connect OTDR. STM -4 STM-1 CWDM MUX / DMUX ADM-CWDM CWDM MUX / DMUX STM-1 STM -4 PROSPERO-LCD: Managed CWDM multiplexer/demultiplexer with LCD display and interface OTDR PROSPERO-LCD PROSPERO PROSPERO-DWDM ADM-CWDM 1650nm STM -4 STM -4 1650nm OTDR Managed CWDM multiplexer with port, LCD display and 1650 filtered port Managed CWDM multiplexer with port and LCD display Passive CWDM multiplexer Passive DWDM multiplexer Add/Drop CWDM multiplexer Media s, optical switches BitStream s offer includes wide range of optical switches and media s (fiber to fiber and copper to fiber), including both and protocol/data transparent solutions (, Sonet). Transparent fiber to fiber s can be used in wide range of applications, including wavelength conversion (CWDM, DWDM), MM to SM conversion, signal repeating (3R signal regeneration). NESO-P: Dual copper to fiber with additional optical path protection and fiber to fiber conversion working modes GFX METIS NESO-P NESO-PoE NESO 4x 10/100/1000 Mbit/s RJ45 + 1x 1000 Mbit/s SFP 3x 10/100 Mbit/s RJ45 + 1/2x 100 Mbit/s SC 2x SFP (transparent fiber to fiber, maximum 3,125 Gbit/s data rate) 2x 10/100/1000 Mbit/s RJ45 + 2x 1000 Mbit/s SFP 1x 10/100/1000 Mbit/s RJ45 + 1x 1000 Mbit/s SFP, PoE support 1x 10/100/1000 Mbit/s RJ45 + 1x 1000 Mbit/s SFP ENVIRONMENT MONITORING AND CONTROL Environment monitoring and control units can provide supervising and recording of critical environmental conditions such as temperature and humidity, monitors - through relevant inputs - the events of violation of the facility's space, flooding, fire etc. 1) Digital input: Door opening detector 2) Digital output: Alarm sirene 3) Digital input: Smoke detector, informs about fire presence 4) 1-wire: Temperature and humidity probe mounted in Rack 5) Relay output: Air conditioner switched on automatically when the temperature rises above set point 6) Digital input: water leak detector 7) Virtual RS232 console: Telecom rectifier remotely managed by IP network SETEBOS-L: Control measurement central unit, TH measurement of humidity and temperature from two sensors (or more using 1- wire), transfer of condition of 4 inputs, control of 4 outputs, measurement of two 0-60V DC voltages, RS232 virtual console
TELECOMMUNICATION TESTERS BitStream s telecommunication testers are comprehensive test tools with E1 G.703/G.704, and RS232/485 links maintenance and failure indication. 4 x E1 G.703 E1 Loop "Out of service" tests E1 G.703 "In service" tests E1 G.703 While using MULTIPRON it is possible to test four E1 channels at the same time (each channel via independent RJ45 port). User is allowed to perform data monitoring and testing of E1 channels timeslots (according to the ITU-T G.704). Tester is able to generate clock deviation in the range of +/- 30ppm. 10/100/1000 Mbit/s 10/100/1000 Mbit/s MTLTIPRON testers are equipped with two combo interfaces (2x RJ45, 2x SFP), allowing user to test both wired and optical transmission paths. Tester supports few kind of tests on interfaces: RFC2544, Network Monitor Test (shows utilization), Network Sniffer (makes a copy of transmitted data without interrupting it), custom interface to interface test and simple cable tester. data stream can be configured with frame sizes (up to 10240Bytes), burst sizes, interframe gap, MAC/IP addresses, V (802.1q, QinQ), QoS options, UDP/TCP ports and others. RS 232 RS 485 RS 232 loop RS 485 loop Testers can be equipped with full RS232 interface, simplified RS232 interface and RS485 interface. Devices are able to generate serial transmission with up to 230,4kbit/s (RS232) and 2Mbit/s (RS485) data rates. MULTIPRON_advance MULTIPRON_basic 2x 10/100/1000Mbit/s (2x RJ45 + 2x SFP), 4x E1 G.703/704, RS232/485 2x 10/100/1000Mbit/s (2x RJ45 + 2x SFP), 4x E1 G.703, RS232 MULTIPRON testers are equipped with battery with capacity of 18000 mah. TURNKEY PROJECTS Despite offering typical transmission devices, BitStream company can realize accommodating unusual demands and creating customized solutions. "turnkey" equipment projects by Fiber based liquid level measurement in drainage systems. IP Splitter 90:10 up to 20km Splitter 90:10 Splitter 50:50 Fiber based liquid level measurement system consist of data loggers, measuring sensors, optical splitters, power supply units, IP and monitoring application. Data Loggers (DL) are connected to the sensors using current loop interfaces. DL devices operate in batch mode, configurable by the operator, in which they collect measurement data. Collected data is then transmitted through fiber to IP, which converts data to IP format and send it to monitoring application installed on PC.