Fibre Channel Fiber-to-Fiber Media Converters
|
|
- Moses Adams
- 5 years ago
- Views:
Transcription
1 Fibre Channel Fiber-to-Fiber Media Converters CN-155-XX CN-131-XX Multi-mode to Single-mode series Single-mode to Single-mode series Low cost CCN-2000 Fibre Channel media converter modules by Canary Communications provide economical, long-range Gigabit data-rate connections and present increased flexibility to storage area network (SAN) design. Operating at Gigabaud, Canary Fibre Channel Fiber-to-Fiber media converters extend the reach of Fibre Channel over multi-mode and single-mode fiber and are typically used to link storage devices normally configured with low-cost multimode interfaces. They are ideal for data intensive backbones in the enterprise or across the campus and can be used to create and take advantage of dispersed storage capacity. Use Canary s Fibre Channel Fiber-to-Fiber converters to economically link storage capacity and remote or back-up servers dispersed throughout the network. Canary offers versions using standard duplex fiber optics and versions providing Single-Fiber, Bi-Directional links. Models with CWDM transmission wavelengths support Coarse Wavelength Division Multiplexed data channelization for long-distance, point-to-point and ring architectures. Standalone models with similar capabilities as well as Features include: Supports Gigabaud (Gigabit) data rate Diagnostic LEDs Simple plug and go installation Transparent to Flow-Control commands Additional models include: Long-range singlemode, Single-Fiber Bi-Directional single-mode, Extended Reach multi-mode and versions launching ITU specified CWDM transmitter wavelengths modules for Canary s CCN-2000/CCN-0400 chassis families are also available. Standard Fibre Channel multi-mode ports provide minimum transmission distances of 220+ meters over 62.5/125 µm fiber or 500+ meters over 50.0/125 µm fiber. In most installations, actual transmission distances are significantly greater. Standard Fibre Channel models with single-mode ports provide transmission distances ranging from 10 to 70 kilometers over 9.0/125 µm single-mode fiber. Maximizing storage potential...when high speed connections matter
2 ORDERING INFORMATION Model Numbers Media Types Min. Tx Max. Tx Rx Sensitivity Min. Max. Max. Input Connector Type Wavelengths (ηm) Transmit Distance CCN converters with standard multi-mode fiber port connectors are designated by (CN-155-XX) or (CN-156XX) and have similar power and sensitivity specifications CN ** MM / MM -9.5 dbm -4.0 dbm dbm 7.5 db 13.0 db 0.0 dbm SC/SC 850 ηm 220/550 m ea. CN ** MM / MM dbm -4.0 dbm dbm 7.0 db 13.0 db 0.0 dbm LC/LC 850 ηm 220/550 m ea. Specifications below for single-mode fiber connectors CN ** SM / SM dbm -3.0 dbm dbm 10.0 db 17.0 db -3.0 dbm SC/SC 1310 ηm 10Km each CN MM / SM dbm -3.0 dbm dbm 10.0 db 17.0 db -3.0 dbm SC/SC 1310 ηm 550m / 10 Km CN MM / SM dbm -3.0 dbm dbm 10.0 db 17.0 db -3.0 dbm LC/LC 1310 ηm 550m / 10 Km CN E33 MM / SM -5.0 dbm 0.0 dbm dbm 19.0 db 24.0 db -3.0 dbm SC/SC 1310 ηm 550m / 30 Km CN E45 MM / SM -5.0 dbm 0.0 dbm dbm 19.0 db 24.0 db -3.0 dbm SC/SC 1550 ηm 550m / 40 Km CN E75 MM / SM -2.0 dbm 3.0 dbm dbm 22.0 db 27.0 db -3.0 dbm SC/SC 1550 ηm 550m / 70 Km ** Reference optical specifications for standard multi-mode or single-mode fiber port connectors. Other table specifications for alternate (second) fiber port connector. * NOTE: Most versions of CN-1XX-XX converter modules are available as standalone models and as card modules for Canary s CCM-1600 Chassis units. Please refer to the Fibre Channel (standalone) and CCM-1600 Data Sheets for more information. More versions of the CN-155-XX series may be found on the Canary web site as they become available.
3 Fibre Channel, Single-Fiber Bi-Directional, Media Converters CN A and CN B Multi-mode to Single-Fiber, Bi-Directional Single-Mode CN A & CN B Single-mode to Single-Fiber, Bi-Directional Single-mode Canary s Fiber Channel CN A/B multi-mode to Single-Fiber, Bi-Directional single-mode converters transport Gigabaud (Gigabit) data-rate traffic, originating at low-cost multi-mode ports, across the enterprise via a single strand of single-mode fiber cable. CN A/B converters are designed to free-up fiber capacity by using dual wavelengths transmitted bi-directionally over a single strand of a duplex fiber pair. They are ideal for data intensive backbones in the enterprise or across the campus where extra fiber capacity is lacking but additional access is needed for redundancy, to add channels, or for alternate protocols. Features include: Supports Gigabaud (Gigabit) data rate Diagnostic LEDs Simple plug and go installation Transparent to Flow-Control commands Canary s Single-Fiber, Bi-Directional converters are functionally identical to standard units with the exception that units designated with an A transmit at 1550 ηm and receive on 1310 ηm, while B units transmit at 1310 ηm and receive on 1550 ηm. Single-Fiber converters must be connected as complementary A & B pairs. Similarly, standalone A & B units can be connected to complementary A & B modules used in the CCN-2000/0400 or CCN-1600 Chassis families. Canary Single- Fiber converters are available with 10 kilometer or 20 kilometer transmission ranges. Standard CM multi-mode ports provide minimum transmission distances of 220+ meters over 62.5/125 µm fiber or 500+ meters over 50.0/125 µm fiber.
4 ORDERING INFORMATION Model Numbers Media Types Min. Tx Max. Tx Rx Sensitivity Min. Max. Max. Input Connector Type Wavelengths (ηm) Transmit Distance CCN converters with standard multi-mode fiber port connectors are designated by (CN-155-XX) or (CN-156-XX) and have common power and sensitivity specifications Standard single--mode fiber port connectors are designated by (-31-) e.g. (CN-1XX-31) or (CN-131-XX) with Output : ( -10, -3 dbm) and Sensitivity: ( -20 dbm) CN ** MM / MM -9.5 dbm -4.0 dbm dbm 7.5 db 13.0 db 0.0 dbm SC/SC 850 ηm 220/550 m ea. Specifications below for single-mode fiber connectors CN ** SM / SM dbm -3.0 dbm dbm 10.0 db 17.0 db -3.0 dbm SC/SC 1310 ηm 10Km each CN A MM / SM -8.0 dbm -3.0 dbm dbm 13.0 db 18.0 db -3.0 dbm SC/SC 1550/ m / 20 Km CN B MM / SM -8.0 dbm -3.0 dbm dbm 13.0 db 18.0 db -3.0 dbm SC/SC 1310/ m / 20 Km CN E4A MM / SM -3.0 dbm 2.0 dbm dbm 20.0 db 25.0 db -3.0 dbm SC/SC 1550/ m / 40 Km CN E4B MM / SM -3.0 dbm 2.0 dbm dbm 20.0 db 25.0 db -3.0 dbm SC/SC 1310/ m / 40 Km CN A SM / SM -8.0 dbm -3.0 dbm dbm 13.0 db 18.0 db -3.0 dbm SC/SC 1550/ Km / 20 Km CN B SM / SM -3.0 dbm 2.0 dbm dbm 20.0 db 25.0 db -3.0 dbm SC/SC 1310/ Km / 20 Km ** Reference optical specifications for standard multi-mode or single-mode fiber port connectors. Other table specifications for alternate (second) fiber port connector. * NOTE: CN A/B / CN E4A/B converters are available as standalone models and as card modules for Canary s CCM-1600 Chassis models. Please refer to the Fibre Channel (standalone) and CCM-1600 Data Sheets for more information. More versions of the CN A/B series may be found on the Canary web site as they become available.
5 Fibre Channel CWDM Fiber-to-Fiber Media Converters CN-155W-XX - Multi-mode to Single-mode with ITU / CWDM specified wavelengths Canary s Fibre Channel, CN-155W-XX series of Coarse Wavelength Division Multiplexing (CWDM) converters provide an economical way to convert multi-mode, Gigabaud (Gigabit) data-rate traffic for launch and transport through CWDM Multiplexers and provide access to high capacity CWDM based networks. Features include: Supports Gigabaud (Gigabit) data rate Diagnostic LEDs Simple plug and go installation Transparent to Flow-Control commands Coarse Wavelength Division Multiplexing reduces network congestion with a minimum infrastructure investment. Using discrete wavelengths (one per channel), multiple data channels can be transported in parallel over a single-mode fiber cable. CWDM enables Fibre Channel traffic to co-exist with Gigabit Ethernet and Fast Ethernet traffic while being transported together across the network. CN-155W-XX CWDM converters are designed to meet industry needs for an economical way to access CWDM point-to-point campus and metro-ring networks. They are used with Main Distribution Frame (central office) Multiplexer / Demultiplexers and with remote site, Optical Add/Drop Multiplexers (OADMs), to insert and/or drop optical traffic from single-mode fiber segments. Specific models provide transmission on one of eighteen discrete λs, each a unique, ITU specified, CWDM wavelength. Versions are available for either 40+ kilometer or 60+ Kilometer transmission distances. CN-155W-XX multi-mode ports provide minimum transmission distances of 220+ meters over 62.5/125 µm fiber or 500+ meters over 50.0/125 µm fiber. CWDM converters are functionally identical to standard units with the exception that units at opposite ends of a fiber link must be models with identical wavelengths in order to maintain a common channel link e.g. if one device is operating at 1470 ηm, the second must transmit and receive on the same wavelength. Similarly, a standalone 1470 ηm unit can be connected to a CCN or CCN-2000 / CCN-0400 chassis module with the same wavelength.
6 ORDERING INFORMATION Model Numbers Media Types Min. Tx Max. Tx Rx Sensitivity Min. Max. Max. Input Connector Type Wavelengths (ηm) Transmit Distance CCN converters with standard multi-mode fiber port connectors are designated by (CN-155-XX) or (CN-156-XX) and have common power and sensitivity specifications CN ** MM / MM -9.5 dbm -4.0 dbm dbm 7.5 db 13.0 db 0.0 dbm SC/SC 850 ηm 220/550 m ea. Specifications below for single-mode CWDM fiber connectors CN-155W-XX * MM / SM -5.0 dbm 0.0 dbm dbm 17.0 db 22.0 db -3.0 dbm SC/SC CWDM 550m / 40 Km CN-155W-XXE6 MM / SM 0.0 dbm 5.0 dbm dbm 24.0 db 29.0 db -3.0 dbm SC/SC CWDM 550m / 60 Km CN-155W-XXE8 MM / SM dbm dbm dbm db db dbm SC/SC CWDM 550m / 80 Km ** Reference optical specifications for standard multi-mode or single-mode fiber port connectors. Other table specifications for alternate (second) fiber port connector. * NOTE 1: W-XX designates one of eighteen CWDM optical transmission wavelengths (λ) e.g. CN-155W-47 = 1470 ηm or CN-155W-61 = 1610 ηm transmission. Please refer to the CWDM (Coarse Wavelength Division Multiplexing Section for more information. * NOTE 2: CN-155W-XX CWDM converters are available as standalone models and as card modules for the SNMP manageable CCM-1600 Chassis units. Please refer to the Fibre Channel (standalone) and CCM-1600 Data Sheets for more information. Please refer to the Standalone / Rackable CWDM data pages for information on Passive Optical Multiplexer / De-Multiplexers and OADMs. There are eighteen CWDM wavelengths (λs) specified. Eight standard wavelengths plus four O-band λs are useable over most standard single-mode fiber. Canary offers products for the standard eight wavelengths plus four O-band λs: 1470, 1490, 1510, 1530, 1550, 1570, 1590, 1610 ηm , 1310, 1330, 1350 ηm More versions of the CN-155W-XX series may be found on the Canary web site as they become available.
Conversion Net CCN-2000/CCN-0400
Conversion Net CCN-2000/CCN-0400 CCN-2000/CCN-0400 Modular Converter Chassis Group Features: Optional Redundant Power Supply or Fans Hall Effect sensors monitor Fan speeds Single-Fiber, Bi-Directional
More informationCOE Group plc. Contents
CWDM Supplement COE Group plc COE develops and supplies analogue and digital video surveillance (CCTV) systems for complex and robust applications. These end to end systems include fibre transmission,
More informationExtended Reach, Client-Side SFP, Multi-Rate, Multi-Protocol, DWDM, 3R Transponder WaveReady Transponder 740 XLR
COMMUNICATIONS MODULES & SUBSYSTEMS Extended Reach, Client-Side SFP, Multi-Rate, Multi-Protocol, DWDM, 3R Transponder WaveReady Transponder 740 XLR Key Features Client-side SFP modules support either single-mode
More information10G SFP+ Modules. 10G SFP+ Module Series
Feature Highlights Enhanced Small Form-Pluggable (SFP+) form factor Hot pluggable Support 10G Ethernet Feature Digital Diagnostics Monitoring (DDM) 1 RoHS Compliant Compliant with MSA (Multiple Source
More informationPHOX TM. Camera Link Fiber Extender. Base Configuration KEY FEATURE APPLICATIONS PHOX-BM PHOX-BL-10/20/40/50
PHOX TM KEY FEATURE Fully supports base Camera Link TM cameras/frame grabbers Provides 2Gb/s transport bandwidth up to 24 bits and 66 MHz pixel clock (85MHz optional) Zero loss and transparent transport
More informationDWDM. DATA SHEET DB4134-E Issue F Page 1 of 6
DWDM DATA SHEET DB4134-E Issue F Page 1 of 6 Passive optical multiplexer/de-multiplexer. Increases the capacity of existing networks by transferring several wavelengths on the same fibre. Independent of
More informationScope: Using Wave Division Multiplexing (WDM) for the Protection Data Interface (PDI) of the 7SD5 / 7SD61.
Page 1 of 10 Using Technology for the PDI of the and 7SA522/7SA6 Scope: Using Wave Division Multiplexing () for the Protection Data Interface (PDI) of the 7SD5 /. Two important issues related to differential
More informationLONWORKS Fibre Optic Converter
LONWORKS Fiber Optic Converter LRW-102 and LRW-102/PP LONWORKS to fibre optic link, multidrop and redundant ring applications The LRW-102 is a fibre optic modem designed for multidrop and redundant ring
More informationWaveReady WRT Gbps Extended-Reach DWDM Tunable Transponder with XFP Client Interface
COMMUNICATIONS MODULES & SUBSYSTEMS WaveReady 10 Gbps Extended-Reach DWDM Tunable Transponder with XFP Client Interface Key Features Tunable in software over the full C-band with stimulated Brillouin scattering
More informationPHOX TM. Camera Link Fiber Extender. Dual Base Configuration KEY FEATURES APPLICATIONS PHOX-B2M-250 PHOX-B2L-10/20/40/50
PHOX TM KEY FEATURES Fully supports two unsynchronized base Camera Link TM cameras/frame grabbers Provides 4Gb/s transport bandwidth - 24b/pixel and pixel clock rate up to 66MHz for each camera (85MHz
More informationCFMFFxxxx-2xx User s Guide Slide-in-Module Media Converter Fast Ethernet, ATM, SONET, or Gigabit
CFMFF1317-210 SC, 1300 nm multimode CFMFF1717-210 60 km (37.2 miles) CFMFFxxxx-2xx User s Guide Slide-in-Module Media Converter Fast Ethernet, ATM, SONET, or Gigabit Transition Networks CFMFFxxxx-2xx series
More informationIndustrial 10/100 Base-TX to 100 Base-FX Media Converter NS-200AFC-T/NS-200AFCS-T/NS-200AFCS-60T +12 ~ +48
NS-200AF Series Industrial 0/00 Base-TX to 00 Base-FX Media Converter NS-200AFC-T/NS-200AFCS-T/NS-200AFCS-60T NS-200AFT-T 00Base-FX e F -30 ~ +75 +2 ~ +8 LAN x x Fiber Optic Features C C Temperature Automatic
More informationLong Reach, Client-Side SFP, Multi-Rate, Multi-Protocol, CWDM, 3R Transponder WaveReady Transponder 740 LR CWDM
COMMUNICATIONS MODULES & SUBSYSTEMS Long Reach, Client-Side SFP, Multi-Rate, Multi-Protocol, CWDM, 3R Transponder WaveReady Transponder 740 LR CWDM Key Features Client-side SFP modules support either single-mode
More information400G-FR4 Technical Specification
400G-FR4 Technical Specification 100G Lambda MSA Group Rev 1.0 January 9, 2018 Chair Mark Nowell, Cisco Systems Co-Chair - Jeffery J. Maki, Juniper Networks Marketing Chair - Rang-Chen (Ryan) Yu Editor
More informationMICROSENS. Fast Ethernet Switch Modul 4x 10/100Base-TX, 1x 100Base-FX. Description. Features
Fast Ethernet Switch Modul 4x 10/100Base-TX, 1x 100Base-FX Description This Ethernet Switch Module has been designed with 4x10/100Base-TX ports and 1x100Base-FX fiber optic port for the interconnection
More informationEthernet Media Converters
Allied Telesyn AT-MC13, AT-MC14, AT-MC15 and AT-MC16 Media Converters Seite 1 von 5 AT-MC13 Media Converter UTP to Fiber "ST" AT-MC14 Media Converter UTP to Fiber "SC" AT-MC15 Media Converter UTP to BNC
More informationH5000 Outdoor Mini Virtual HUB
H5000 Outdoor Mini Virtual HUB The H5000 is an RFOG Indoor/Outdoor Mini Virtual Hub that provides an optical distribution point for downstream traffic and an aggregation point for upstream traffic, making
More informationIndex Contents: 1000 Series Single Channel Multi Mode Fiber Optic Video Solutions Product Overview Product Configurations Product Specifications
Welcome Nitek is a Rolling Meadows, Illinois based manufacturing company with a primary focus on design, development and manufacturing of high performance, reliable CCTV video transmission systems. Nitek
More informationSingle mode 9/125µm, duplex
Fiber Converter Module RS-232 MICROSENS General For the connection of devices, control units and machine controls with standard serial interfaces MICROSENS is offering special fiber converters for the
More informationPHIRE TM. Camera Link Fiber Adapter. Base Configuration KEY FEATURES TARGET APPLICATIONS
PHIRE TM KEY FEATURES Fully suppts base TM cameras/frame grabbers Direct plug no electrical cable needed Broad bandwidth up to 2.5 Gb/s suppting 24 bits image data at 85 MHz pixel clock Transparent operation
More informationThe Art of Engineering
Accessories for Optribution Chassis The Art of Engineering The final product may vary from the above image depending on the options selected. Products: Features: 1:2 Optribution Switch; 1260...1360 nm,
More informationSFCxxB16GExD SFP Dual Fibre CWDM ITU CWDM / 16dB / Gigabit Ethernet
SFCxxB16GExD SFP Dual Fibre CWDM ITU CWDM / 16dB / Gigabit Ethernet For your product safety, please read the following information carefully before any manipulation of the transceiver: ESD This transceiver
More informationFibre optic router for TP/FT-10 LRW-112PP
Fibre optic router for TP/FT-10 LRW-112PP Lo n Wo r k s to fibre optic link, point-to-point applications The LRW-112PP router offers an easy way to extend the distance between LONWORKS 78 kbit/s TP/FT
More informationSPCxxB10100D SFP+ Dual Fiber CWDM CWDM / 10dB / 10 Gigabit Ethernet
SPCxxB10100D SFP+ Dual Fiber CWDM CWDM / 10dB / 10 Gigabit Ethernet For your product safety, please read the following information carefully before any manipulation of the transceiver: ESD This transceiver
More informationE TM. Fiber. Fully. high speed downlink and low. CoaXPress. PHT4-x-x. fiber LED. status Compact size. High. products) pharmaceutical.
PHORTE E TM KEY FEATURES Fully supports standard with high speed downlink and low speed uplink Supports all highh speed bit rates 1.25G, 2.5G, 3.125G, 5G and 6.25Gb/s Supports PoCXPP function to supply
More informationFibre Optic Modem ODW-622
Fibre Optic Modem ODW-622 RS-232 to fibre optic link, redundant ring or multidrop applications The ODW-622 can be used to create either redundant ring or multidrop solutions for devices with RS-232 interfaces.
More informationLONWORKS Fibre Optic Router
LONWORKS Fiber Optic Router LRW-112 and LRW-112/PP LONWORKS to fibre optic link, multidrop and redundant ring applications The LRW-112 router offers an easy way to extend the distance between LONWORKS
More information16 SFP ports and 16 BNC. built in. 24 SFP ports, 8 BNC
Product Overview 2018 BarnOne Frames BTF1-01 BTF1-02 BTF1-03-08 BTF1-03-16 BTF1-04 BTF1-05-08 BTF1-05-16 BTF1-06 BTF1-07-08 BTF1-07-16 BTF1-08-08 BTF1-08-16 16 SFP ports 16 SFP ports and 16 BNC 16 SFP
More informationSFCxxB24GExD SFP Dual Fibre CWDM CWDM / 24dB / Gigabit Ethernet
SFCxxB24GExD SFP Dual Fibre CWDM CWDM / 24dB / Gigabit Ethernet For your product safety, please read the following information carefully before any manipulation of the transceiver: ESD This transceiver
More informationopengear OPG-1L 50 MHz-2.3 GHz
MODEL opengear OPG-1L 50 MHz-2.3 GHz RF FIBER OPTIC LINK EMCORE s opengear OPG-1L s are optimized to perform in the 50 MHz to 2.3 GHz frequency range providing transparent signal transport for satellite
More informationCisco 10GBASE Dense Wavelength-Division Multiplexing SFP+ Modules
Data Sheet Cisco 10GBASE Dense Wavelength-Division Multiplexing SFP+ Modules Use Dense Wavelength-Division Multiplexing (DWDM) SFP+ modules to integrate WDM transport directly into your Cisco 10 Gigabit
More informationFibre Optic Modem ODW-611
Fibre Optic Modem ODW-611 PROFIBUS DP to fibre optic link, point-to-point applications The ODW-611 is a fibre optic modem designed for point-to-point fibre optic connections between PROFI- BUS DP networks.
More informationODW-621. RS-232 Point-to-point applications
Re-timing Data rate up to 250 kbit/s 9-position D-sub connector Redundant power supply inputs Status interface for fault indication Fibre link fault indication (Red) Design for harsh environments 40 to
More informationOpti Max Nodes Digital Return System
arris.com Opti Max Nodes Digital Return System 2x85 MHz Legacy ARRIS Protocol Node Transmitter and CHP Receiver FEATURES Digital Return technology for ease of set up and simplified plug and play operation
More informationDS3850R0112. FibroLAN broad portfolio of optical transceivers include SFP, SFP+ and XFP series
SFP+&XFP Transceivers FibroLAN broad portfolio of optical transceivers include SFP, SFP+ and XFP series Optical Transceivers are Multi-Source Agreement (MSA) compliant These devices provide high performance
More information3G-SDI Extender via Single Mode Fiber LC Simplex Connector Extends 3G-SDI Link Up To 20 Kilo Meters
Description 3G-SDI (3G Serial Digital Interface) recently has become increasingly popular in the application of video and audio transmission system. However, the traditional copper wire cable imposes limits
More informationMX/HD-SDI-3G. Transmit HD-SDI-3G signals over Fiber
MX/HD-SDI-3G Transmit HD-SDI-3G signals over Fiber Key Features Transmit ASI or SDI signal over one single-mode Fiber Support data rate from 19.4Mb/s to 3Gb/s SMPTE 424M, SMPTE 292M, SMPTE 344M and SMPTE
More informationPHORCE (standalone version)
PHORCE (standalone version) PRODUCT BRIEF The PHORCE product family is designed to extend the SuperSpeed USB3.0 connections beyond the typical 3 meter reach of copper cables. The standalone version of
More informationCHP Max Headend Optics Platform CHP CORWave II
CHP Max Headend Optics Platform CHP CORWave II 1 GHz C Band DWDM Forward Transmitters FEATURES Consolidation or elimination of OTNs and node splitting by harvesting plant assets with up to 16 full spectrum
More informationVersiVision. FVTM4BCxA-CE / FVRM4BCxA-CE MULTIPLEXER SYSTEM 4-CHANNELS DIGITALLY ENCODED VIDEO 2-CHANNELS BI-DIRECTIONAL DATA
VersiVision FVTM4BCxA-CE / FVRM4BCxA-CE MULTIPLEXER SYSTEM 4-CHANNELS DIGITALLY ENCODED VIDEO 2-CHANNELS BI-DIRECTIONAL DATA 4-CHANNELS BI-DIRECTIONAL AUDIO 4-CHANNELS BI-DIRECTIONAL CONTACT CLOSURE 1-CHANNEL
More informationOmniStar GX2 Headend Optics Platform
arris.com OmniStar GX2 Headend Optics Platform GX2 DM2000C Series 1550 nm Broadcast/Narrowcast Transmitter FEATURES 1 GHz full spectrum bandwidth solution Maximize fiber assets with up to 40 wavelengths
More informationHeadend Optics Platform (CH3000)
arris.com Headend Optics Platform (CH3000) HT3540H Series Double-Density Full Spectrum DWDM Transmitter System FEATURES DWDM transmitter: up to 40 wavelengths on ITU grid Hot plug in/out, individually
More informationMetrobility. Installation & User Guide Model: R380-SS MULTIRATE PWR
Metrobility Multi-Rate Line Card MULTIRATE PWR 1 2 LB BP Installation & User Guide Model: R380-SS Metrobility Multi-Rate Line Card Line Card: R380-SS Multi-rate SFP to SFP Small Form-Factor Pluggable (SFP)
More informationCisco GS7000 High-Output 4-Way Segmentable Node with 42/54 Split
Data Sheet Cisco GS7000 High-Output 4-Way Segmentable Node with 42/54 MHz Split The Cisco GS7000 High-Output Segmentable Node with 42/54 MHz Split is the latest-generation 1-GHz optical node platform designed
More informationTHE ART OF ENGINEERING
THE ART OF ENGINEERING L-Band Distributing Matrix 16² The final product may vary from the above image depending on the options selected. Product: DEV 1985/16x16 DEV 1985/16x8 16x16 Distributing Matrix
More informationIES-3162GC. >> Industrial 18-port Managed Ethernet Switch with 16x10/100Base-T(X) Ports and 2xGigabit combo ports. Industrial Ethernet Switch
Ethernet Switch Managed Ethernet Switch IES-3162GC >> 18-port Managed Ethernet Switch with 16x10/100Base-T(X) Ports and 2xGigabit combo ports 4 Ethernet Switch Supports O-Ring (recovery time < 10ms over
More informationOMNISTAR GX2. GX2-LM1000E Series 1310 nm Broadcast Transmitter DATA SHEET BENEFITS. 1 GHz bandwidth
DATA SHEET BENEFITS OMNISTAR GX2 GX2-LM1000E Series 1310 nm Broadcast Transmitter 1 GHz bandwidth High module density up to 16 transmitter modules in a 4 RU housing High performance: Advanced predistortion
More information40G SWDM4 MSA Technical Specifications Optical Specifications
40G SWDM4 MSA Technical Specifications Specifications Participants Editor David Lewis, LUMENTUM The following companies were members of the SWDM MSA at the release of this specification: Company Commscope
More informationF M1SDI 1 Ch Tx & Rx. HD SDI Fiber Optic Link with RS 485. User Manual
User Manual F M1SDI 1 Ch Tx & Rx HD SDI Fiber Optic Link with RS 485 User Manual 1Introduction 1.1Overview 1.2Features 1.3Application 2 Panel 2.1 Front Panel 2.2 Rear Panel 3Technical Specification Contents
More informationWe will look first at the cable, and then the transceivers (which act as both transmitter and receiver on each end of the fiber cable).
Nuclear Sensors & Process Instrumentation Fiber Cable Basics Fiber-optic communication is a method of transmitting information from one place to another by sending light through an optical fiber. The light
More informationMAXCOM PRODUCT SPECIFICATIONS FIBER OPTIC VIDEO / AUDIO / ASI LINK. Model MX3257HD. Description. Features. Model Selection Guide
MAXCOM PRODUCT SPECIFICATIONS FIBER OPTIC VIDEO / AUDIO / ASI LINK Model MX3257HD Description The rack-mountable MX3257HD fiber optic video multiplexer is ideal for transmitting 1 channel of video, 2 channels
More informationHDMI Extender via Single SC Fiber Support 3D/4K2K Up To 10Km In One Single-mode Fiber
Description HDMI (High-Definition Multimedia Interface) recently has become increasingly popular in the application of video and audio transmission system. In view of the extreme of electrical performances,
More informationHigh Performance fibre systems
High Performance fibre systems Fibre Systems with intelligent, smart signal monitoring for television studios, post production, outside broadcast and network operators. Stand alone conversion, rack mount
More informationOmniStar GX2 Headend Optics Platform
arris.com OmniStar GX2 Headend Optics Platform GX2 RX200BX4 Quad Return Path Receiver FEATURES Very high module density allowing up to 16 quad receiver modules in a housing to provide 64 independent optical
More informationMediaCento IPX 4K. Product Data Sheet VX-HDMI-4KIP-TX VX-HDMI-4KIP-RX. Overview. Basic Features blackbox.com
VX-HDMI-4KIP-TX VX-HDMI-4KIP-RX Product Data Sheet MediaCento IPX 4K Overview The MediaCento IPX 4K extends HDMI, USB, Audio, RS-232, and IR over IP via CATx or single-mode fiberoptic cable. The extender
More informationTypical applications:
Typical applications: Managing multiple inputs for growing satellite teleports Extended L-band frequency for Ka-band & HTS applications Routing live traffic to multiple modems ETL s new ultra compact Hurricane
More informationModel GS Port Node 1 GHz with 65/86 MHz split
Model GS7000 4-Port Node 1 GHz with 65/86 MHz split The Model GS7000 4-Port Node is our latest generation 1 GHz optical node platform and utilizes a completely new housing designed for optimal heat dissipation.
More informationTranScend Opto-Stacker & Destacker. Operation Manual
TranScend Opto-Stacker & Destacker Operation Manual Although every effort has been taken to ensure the accuracy of this document it may be necessary, without notice, to make amendments or correct omissions.
More informationL-Band Fiber Optic Links
L-Band Fiber Optic Links Features & Benefits L-Band: 950 3000MHz Up to 10Km distance Wide input power suitable for both Uplink and Downlink applications Powerful management capabilities via a front panel
More informationPL7330T / PL7330R16 RF Link High Power Input, 16dB Optical Budget 45Km nm or 70Km nm
PL7330T / PL7330R16 RF Link High Power Input, 16dB Optical Budget 45Km - 1310nm or 70Km - 1550nm Features & Benefits: IF Band: 10 200MHz More than 45Km distance [70Km with a PL7330T1550] Powerful management
More informationProposal of Distributing 4 SAT IF Signals To 209 Homes within 3Km Over Fiber Cable
Proposal of Distributing 4 SAT IF Signals To 209 Homes within 3Km Over Fiber Cable Shufeng Yang Greatway Technology Co., Ltd Web: www.greatwaytech.com Contents 1.0 Project Description 2.0 Project Schedule
More informationTC3301. User's Manual
1000Base-T Ethernet Fiber Optic Converter User's Manual 1. Features p 1000Mbps for twisted pair, and 1000Mbps for fiber p Local Dry Contact Alarm Relay p Multimode (850nm) and Single Mode (1310nm/1550nm)
More informationSPDxx040100D SFP+ Dual Fibre DWDM 100GHz DWDM / 40 km / 10 Gigabit Ethernet
SPDxx040100D SFP+ Dual Fibre DWDM 100GHz DWDM / 40 km / 10 Gigabit Ethernet For your product safety, please read the following information carefully before any manipulation of the transceiver: ESD This
More informationJob Aid Server and CSS Separation Avaya S8700 Media Server
Overview of server separation Job Aid and CSS Separation Avaya S8700 Media This job aid provides information regarding the separation of S8700 Media s and the Separation of duplicated Center Stage Switch
More informationOmniStar GX2 Headend Optics Platform
arris.com OmniStar GX2 Headend Optics Platform GX2 EM1000 Series 1550 nm Broadcast Transmitter FEATURES Provides full performance 50 1002 MHz forward bandwidth for mixed analog and digital loading Versions
More informationOptical Fiber Link, 0.1~ 20 GHz RF Over Fiber, I-IFLRF12
Fiber Link, 0.1~ 20 GHz RF Over Fiber, I-IFLRF12 Our I-IFLRF20 series is a wideband RF over fiber link that provides optical transport of RF signals in radars, satcom, EW/ECM and other antenna remoting
More informationDATA CENTER OPTICAL ASSEMBLIES TO SUPPORT QSFP, CFP AND CXP INDUSTRY STANDARD PINOUT CONFIGURATIONS
DATA CENTER OPTICAL ASSEMBLIES TO SUPPORT QSFP, CFP AND CXP INDUSTRY STANDARD PINOUT CONFIGURATIONS Data Center Optical Assemblies to Support QSFP, CFP and CXP Industry Standard Pinout Configurations QSFP,
More informationHDMI Extender via 4 Single-mode fibers 4 x LC Connector Extends HDMI + RS232 full-duplex up to 1500 meters
Description AMRT-FD-05K-4LC extender enables PC HDMI and RS232 link to far end display monitor through fibers, and the maximum communication distance is up to 1500 meters. AMRT-FD-05K-4LC is pure hardware
More information1/31/2009. Technical highlights session PRODUCTS & SERVICES Summary. Sam Tagliavore PBN-FTTX
Technical highlights session PRODUCTS & SERVICES Summary Sam Tagliavore www.pbnamericas.com 1-877-PBN-FTTX 1 Fiber to the: Home Apartment Business Neighborhood No Broadband Bottlenecks One Platform One
More informationDevelopment of optical transmission module for access networks
Development of optical transmission module for access networks Hiroshi Ishizaki Takayuki Tanaka Hiroshi Okada Yoshinori Arai Alongside the spread of the Internet in recent years, high-speed data transmission
More informationINSTRUCTION MANUAL VF MultiDyne. Harnessing The Power of Light
INSTRUCTION MANUAL VF-9000 SERIAL DIGITAL FIBER OPTIC TRANSPORT and DISTRIBUTION SYSTEM FOR SMPTE 259, 292, 424, DVB-ASI, with gigabit ethernet with SNMP & Web page monitoring and other protocols MultiDyne
More informationPluggable Transceivers Installation Guide
Pluggable Transceivers Installation Guide 121140-04 Published November 2017 Copyright 2017 Extreme Networks, Inc. All rights reserved. Legal Notice Extreme Networks, Inc. reserves the right to make changes
More informationSWITCHING, ROUTING & DISTRIBUTION
MODEL OPTIVA SERIES OPTIVA SERIES CONFIGURABLE COMMUNICATION PLATFORM A System Designed By You - For You. The new Optiva Series of digital fiber optic DATASHEET transmission systems are designed entirely
More informationTECHNICAL SPECIFICATION ERC 1340
Page 1 sur 9 TECHNICAL SPECIFICATION ERC 1340 Date Indice Nature des modifications Rédaction Nom/visa 19/05/2007 0 Première rédaction BF Vérification Nom/visa Approbation Nom/visa Page 2 sur 9 CONTENT
More informationCase Study Broadcast Studio. SVT Swedish Television, Stockholm. Copyright 2012 All rights reserved
Case Study Broadcast Studio SVT Swedish Television, Stockholm Copyright 2012 All rights reserved BroaMan GmbH Lohenstr 8 82166 Munich-Gräfelfing Germany A well-known manufacturer of fibre based solutions
More information100G-FR and 100G-LR Technical Specifications
100G-FR and 100G-LR Technical Specifications 100G Lambda MSA Rev 1.0 January 9, 2018 Chair Mark Nowell, Cisco Systems Co-Chair - Jeffery J. Maki, Juniper Networks Marketing Chair - Rang-Chen (Ryan) Yu,
More informationCisco 10GBASE Dense Wavelength-Division Multiplexing XFP Modules
Data Sheet Cisco 10GBASE Dense Wavelength-Division Multiplexing XFP Modules Product Overview The Cisco Dense Wavelength-Division Multiplexing (DWDM) XFP pluggable module (Figure 1) allows enterprise companies
More informationHDMI Extender via Single SC Fiber Support 3D/4K2K Up to 200m in one Single-mode Fiber
Description HDMI (High-Definition Multimedia Interface) recently has become increasingly popular in the application of video and audio transmission system. In view of the extreme of electrical performances,
More information40G SWDM4 MSA Technical Specifications Optical Specifications
40G SWDM4 MSA Technical Specifications Specifications Participants Editor David Lewis, LUMENTUM The following companies were members of the SWDM MSA at the release of this specification: Company Commscope
More informationINSTRUCTION MANUAL FOR MODEL IOC534 LOW LATENCY FIBER OPTIC TRANSMIT / RECEIVE MODULE
210 South Third Street North Wales, PA USA 19454 (T) 215-699-2060 (F) 215-699-2061 INSTRUCTION MANUAL FOR LOW LATENCY FIBER OPTIC TRANSMIT / RECEIVE MODULE i TO THE CUSTOMER Thank you for purchasing this
More informationParameter Symbol Min. Typ. Max. Unit. Supply Voltage Vcc V. Input Voltage Vin -0.3 Vcc+0.3 V. Storage Temperature Tst C
QSFP-4X10G-LR-S-LEG CISCO 40GBASE-LR4 QSFP+ SMF 1310NM 10KM REACH MPO DOM PARALLEL QSFP-4X10G-LR-S-LEG 40Gbase QSFP+ Transceiver Features Four-Channel full-duplex transceiver modules Transmission data
More informationInstruction Manual RT-91600D-SL RR-91600D-SL Sixteen Channel Video Multiplexer With Remote Diagnostic Interface
Instruction Manual RT-91600D-SL RR-91600D-SL Sixteen Channel Video Multiplexer With Remote Diagnostic Interface Copyright 2005, American Fibertek, Inc. 0804JD Table of Contents Functional Description...
More informationDescription. Features MODEL ODN2P OPTICAL DISTRIBUTION NODE WITH TWO AMPLIFIED RF PORTS LIGHT LINK SERIES 2.
MODEL ODN2P OPTICAL DISTRIBUTION NODE WITH TWO AMPLIFIED RF PORTS LIGHT LINK SERIES 2 Description Features The Light LinkB B Series 2 Optical distribution node with two amplified RF ports (ODN2P) has been
More informationRLT 1550 d10. DWDM High Power, Ultra Wide Band CATV & SAT MHz Laser Optical Transmitter, with pre-correction, LAN remote control and alarms
RLT 1550 d10 DWDM High Power, Ultra Wide Band CATV & SAT 47-2.700 MHz Laser Optical Transmitter, with pre-correction, LAN remote control and alarms The ultra wide band, 47-2.700 MHz, optical, laser transmitter,
More informationSNS-XFP-10GD-LR 10 Gbps Multi-Rate XFP Transceivers OC192/STM-64, 10GE or 10G FC 1310nm, Single-Mode 10Km, with Digital Diagnostics.
SNS-XFP-10GD-LR 10 Gbps Multi-Rate XFP Transceivers OC192/STM-64, 10GE or 10G FC 1310nm, Single-Mode 10Km, with Digital Diagnostics. Highlights XFP MSA transceiver Multi-Rate: 9.95Gbps to 11.1Gb/s Protocols:
More informationOmniStar GX2 Headend Optics Platform GX2 LM1000E Series
arris.com OmniStar GX2 Headend Optics Platform GX2 LM1000E Series 1310 nm Broadcast Transmitter FEATURES High density optical platform with up to 16 transmitters per chassis for headend space optimization
More informationCisco ONS Exposed Faceplate Mux/Demux 48-Channel Extended Bandwidth Patch Panel and Splitter Coupler Module
Cisco ONS 15216 Exposed Faceplate Mux/Demux 48- Extended Bandwidth Patch Panel and Splitter Coupler Module Product Overview The Cisco ONS 15216 Exposed Faceplate Mux/Demux 48- Extended Bandwidth Patch
More informationUser s Guide TN-GB-SM512. Gigabit Interface Converter (GBIC) Transceiver Modules
Part Number TN-GB-MM5 TN-GB-ESX5 TN-GB-ESX6 TN-GB-SM5 TN-GB-SM53 TN-GB-SM55 TN-GB-SM58 TN-GB-SM512 User s Guide TN-GB-xM5x Gigabit Interface Converter (GBIC) Transceiver Modules The Transition Networks
More informationAn Approach To 25GbE SMF 10km Specification IEEE Plenary (Macau) Kohichi Tamura
An Approach To 25GbE SMF 10km Specification 20160314 IEEE Plenary (Macau) Kohichi Tamura 1 Reviewers / Supporters Mark Nowell, Cisco Peter Jones, Cisco Matt Traverso, Cisco Peter Stasser, Huawei Brian
More informationREGIONAL NETWORKS FOR BROADBAND CABLE TELEVISION OPERATIONS
REGIONAL NETWORKS FOR BROADBAND CABLE TELEVISION OPERATIONS by Donald Raskin and Curtiss Smith ABSTRACT There is a clear trend toward regional aggregation of local cable television operations. Simultaneously,
More informationReprinted with kind permission from
Reprinted with kind permission from TMBi - 48 TEST AREA NORWIA MINIHUB FRAME, RCONMINI, OC-4B-SDI, SFP www.norwia.no info@norwia.no +47 3345 2090 TMBi - 49 Test bench made by Pablo Martínez With short
More informationIntel Ethernet SFP+ Optics
Product Brief Intel Ethernet SFP+ Optics Network Connectivity Intel Ethernet SFP+ Optics SR and LR Optics for the Intel Ethernet Server Adapter X520 Family Hot-pluggable SFP+ footprint Supports rate selectable
More informationFeatures: Compliance: Applications: Warranty: QSFP-40G-LR4-GT 40GBASE-LR4 QSFP+ SMF Module Cisco Compatible
The GigaTech Products is programmed to be fully compatible and functional with all intended CISCO switching devices. This QSFP+ optical transceiver is compliant with SFF-8436 and QSFP+ MSA standards. This
More information40GBASE-ER4 optical budget
40GBASE-ER4 optical budget Pete Anslow, Ciena SMF Ad Hoc, 21 August 2012 1 Introduction The Next Generation 40 Gb/s and 100 Gb/s Optical Ethernet Study Group has an adopted objective: Define a 40 Gb/s
More information10Gb/s 40km DWDM XFP Optical Transceiver
10Gb/s 40km DWDM XFP Optical Transceiver PRODUCT FEATURES Hot-pluggable XFP footprint Supports 9.95Gb/s to 11.3Gb/s bit rates Supports Lineside and XFI loopback RoHS-6 Compliant (lead-free) Power dissipation
More informationIntroduction. Fiber Optics, technology update, applications, planning considerations
2012 Page 1 Introduction Fiber Optics, technology update, applications, planning considerations Page 2 L-Band Satellite Transport Coax cable and hardline (coax with an outer copper or aluminum tube) are
More informationINTELLIGENT VIDEO SYSTEMS
INTELLIGENT VIDEO SYSTEMS Profile COE Ltd develops and supplies integrated IP video surveillance (CCTV) systems for some of the most complex high profile sites worldwide. COE products and systems allow
More informationtwister Mbps TX-to-FX Media Converter
twister 2131 100Mbps TX-to-FX Media Converter twister 2131 twister 2131 100BASE-FX 100BASE-TX 100BASE-FX 100BASE-TX TX SM (LH) RX BWDM twister 2131 twister 2131 100BASE-FX 100BASE-TX 100BASE-FX 100BASE-TX
More informationPrisma II Optical Amplifiers for Fiber to the Home (FTTH)
Prisma II Optical Amplifiers for Fiber to the Home (FTTH) The Prisma II optical network is an advanced transmission system designed to enhance network architectures and increase reliability, scalability,
More informationFeatures. CPU Version. Non-CPU Version
Features CPU Version Non-CPU Version Up to E or T links on one fiber Optical + protection 0/00 BaseT Ethernet Bridge mode, maximum transmission bandwidth 22Mbps (optional) One V.35, X.2, RS9/V.36, RS232/V.28,
More information