Product Data Sheet www.moteck.com Actuator ID11 ID11 is designed for industrial applications, such as agricultural and construction machines. Comparing with ID1, the installation length of ID11 is 4mm less than ID1. This makes ID11 ideal for application which requires a shorter dimension. Ball Screw and ACME spindle are both available to choose. Feature - Main applications: Industrial - Input voltage: 12 / 24 / 48V DC - Max. rated load 3,N (ACME) / 7,N (Ball Screw) - Max. static load 4,N (ACME) / 13,6N (Ball Screw) - Max. speed: 72.1 mm/sec @ no load - Stroke: 12 61 mm - IP Protection level: IP4 - Overload protection by clutch - Adjustable limit switches* - Extension tube material Iron (for ACME) or stainless steel (for Ball Screw) - Color: Black - Power cord length: 2 mm (with tinned wires) - Bottom cable outlet - Duty cycle: 2%, max. 2 min. continuous operation in 8 min. - Ambient operation temperature: -2 C ~ +6 C - Certified: CE Marking, EMC Directive 214/3/EU *Remarks: Limit switch adjustment shall apply only to products that are not IP6 grade. Besides, IP protection will be void once the back cover is removed. Please refer to ID11 User Guide. 1
Option - IP Protection level: IP6 - Side cable outlet Compatibility Product Model ID11 spec Control box CI1-24V motor 2
Performance Data ACME type 12V DC motor Model No. Push/Pull Typical Typical ID11-12-1-A-XXX 33. 26.7 2.6 17.6 ID11-12-2-A-XXX 2.1 2 16.8 14.3 2.6 13.2 ID11-12-4-A-XXX 3 8.4 7.4 2.6 11. 4 2 3 2 2:1 1 2:1 1 1 2 3 4 1 2 3 4 24V DC motor Model No. Push/Pull Typical Typical ID11-24-1-A-XXX 33. 26.7 1.6 8.8 ID11-24-2-A-XXX 2.1 2 16.8 14.3 1.6 6.6 ID11-24-4-A-XXX 3 8.4 7.4 1.6. 4 1. 3 2 2:1 7.. 2:1 1 2. 1 2 3 4 1 2 3 4 3
48V DC motor Model No. Push/Pull Typical Typical ID11-48-1-A-XXX 36. 29.1 1.4 3.6 ID11-48-2-A-XXX 2.1 2 17.8.3.8 2.4 ID11-48-4-A-XXX 3 8.6 7.8. 2.1 4 4 3 3 2 2:1 2 2:1 1 1 1 2 3 4 1 2 3 4 Ball Screw type 12V DC motor Model No. Push/Pull Typical Typical ID11-12-1-B-XXX 3 33. 26.7 2.6 ID11-12-2-B-XXX 2:1 4 16.8 14.3 2.6 ID11-12-3-B-XXX 3:1 6 11.2 9.8 2.6 ID11-12-4-B-XXX 7 8.4 7.4 2.6 17.6 13.2 12.1 11. 4 24 3 21 3 18 2 2 2:1 12 9 2:1 3:1 1 3:1 6 3 1 2 3 4 6 7 8 1 2 3 4 6 7 8 4
24V DC motor Model No. Push/Pull Typical Typical ID11-24-1-B-XXX 3 33. 26.7 1.6 ID11-24-2-B-XXX 2:1 4 16.8 14.3 1.6 ID11-24-3-B-XXX 3:1 6 11.2 9.8 1.6 ID11-24-4-B-XXX 7 8.4 7.4 1.6 8.8 6.6 6.1. 4 12 3 1. 3 9. 2 2 2:1 7. 6. 4. 2:1 3:1 1 3:1 3. 1. 1 2 3 4 6 7 8 1 2 3 4 6 7 8 48V DC motor Model No. Push/Pull Typical Typical ID11-48-1-B-XXX 3 36. 29.1. ID11-48-2-B-XXX 2:1 4 17.8.3. ID11-48-3-B-XXX 3:1 6 11.7 1.3. ID11-48-4-B-XXX 7 8.6 7.8. 3.6 2.4 2. 2.1 4 4. 3 3. 3 3. 2 2 2:1 2. 2. 1. 2:1 3:1 1 3:1 1.. 1 2 3 4 6 7 8 1 2 3 4 6 7 8
Dimensions ACME type A S 1.7 38.6 27. 77.2 Ø21 69. Ø26 14 24. 6 Ø.8 23. 11. Ø28.6 Ø63. 28 3.8.8 1. Installation Dimension Stroke (S) 12 (4 ) 3 (6 ) 23 (8 ) 24 (1 ) 3 (12 ) 47 (18 ) 61 (24 ) Retracted Length (A) 319 37 42 471 73 72 878 (tolerance: ±mm) Ball Screw type A S 1.7 38.6 27. 77.2 Ø21 69. Ø26 14 24. 6 Ø.8 23. 11. Ø28.6 Ø63. 28 3.8.8 1. Installation Dimension Stroke (S) 12 (4 ) 3 (6 ) 23 (8 ) 24 (1 ) 3 (12 ) 47 (18 ) 61 (24 ) Retracted Length (A) 39 41 461 12 64 792 94 (tolerance: ±mm) 6
Front connector ACME type Ball Screw type Rear connector 23. 11. 23. 11. 14 Ø28.6 Ø28.6 Ø26 Pivot orientation of rear connector C3 3 C2 3 C1 3 (standard) 3 3 C4 C Note: As an example in orientation. Location of cable outlet Bottom cable outlet Side cable outlet Wiring Power Red Black M+ M- Note: Connect Red (M+) to + & Black (M-) to - of DC power, the actuator will extend. 7
Ordering Key ID11-24 - 2 - B - 3 - IP6 - SC - Input voltage 12: 12V DC 24: 24V DC 48: 48V DC 1: 2: 2:1 3: 3:1 (Ball Screw only) 4: Spindle type A ACME B Ball Screw Stroke 12: 12 mm (4 ) 3: 3 mm (6 ) 23: 23 mm (8 ) 24: 24 mm (1 ) 3: 3 mm (12 ) 47: 47 mm (18 ) 61: 61 mm (24 ) IP Protection level Location of cable outlet Blank IP4 Protection level (standard) IP6 IP6 Protection level Blank: Bottom cable outlet (standard) SC: Side cable outlet Pivot orientation of Rear connector Blank (standard) C1: 3 counter-clockwise C2 6 counter-clockwise C3 9 counter-clockwise C4 3 clockwise C: 6 clockwise (Please refer to page 7) More information about usage is provided in ID11 User Guide, which can be downloaded from Moteck website. www.moteck.com Terms of Use The user is responsible for application suitability of Moteck products. As ongoing improvement process continues, products listed on the Moteck website are subject to change without prior notice. Moteck reserves the right to terminate the sales or remove any product displayed on the website, or listed in its catalogues. 218 Nov. MOTECK. MO-IND-T-3 Version: 2.2 8