Dewatering. Series description Wilo-Drain STS 65. Submersible sewage pump
|
|
- Philomena Higgins
- 6 years ago
- Views:
Transcription
1 Series description Wilo-Drain STS 65 Thermal winding monitoring Max. fluid temperature: 3-40 C Cable length: 10 m Free ball passage: 65 mm Max. immersion depth: 10 m Equipment/function Thermal motor monitoring CS version with integrated motor cooling for vertical and horizontal dry well installation (STS 65 F... CS) Design Submersible sewage pump Type key e.g.: Wilo-Drain STS 65/6 STS Submersible pump 65 Nominal diameter [mm] 6 Max. delivery head [m] e.g.: Wilo-Drain STS 65 F 22.70/25 CS Ex STS Submersible pump 65 Nominal diameter [mm] F Vortex impeller 22 Max. delivery head [m] 70 Max. volume flow [m 3 /h] 25 Power P 2 [kw] (=value/10 = 2.5 kw) CS With cooling jacket for dry well installation Ex Ex-rated Application Pumping of sewage containing faeces (when connected to a pressure pipe, in accordance with DN80 DIN EN ) as well as municipal and industrial sewage, including long-fibre constituents, for: Domestic and site drainage Sewage disposal Water management Environmental and water treatment technology Special features/product benefits Detachable connection cable Dry motor, stainless steel version Non-susceptible to clogging due to large free ball passage (65 mm) Flange connection DN 65 and DN 80 CS version with integrated motor cooling for dry well installation (STS 65 F... CS) Longitudinally watertight cable version (STS 65F ) ATEX-certified (STS 65F ) Technical data Mains connection: 3~400 V, 50 Hz Immersed operating mode: S1 or S3 25% Surfaced operating mode: S2-8 min or S1 in CS version Protection class: IP 68 Insulation class: F Materials Pump housing: EN-GJL-250 Impeller: EN-GJL-250 Shaft: stainless steel Mechanical seal on pump side: SiC/SiC Shaft seal STS 65 on motor side: NBR Mechanical seal STS 65 F on motor side: C/Cr Static gasket: NBR Motor housing: stainless steel /design Submersible sewage pump as submersible monobloc unit for stationary and portable wet well installation. Dry well installation of the unit is also possible in conjunction with a cooling jacket. Hydraulics The outlet on the pressure side is designed as a horizontal DN 65 or DN 80 flange connection. Vortex impeller are used as the impeller shapes. Motor Dry motors give off their heat directly to the surrounding fluid via the housing components and can be used in immersed state for permanent or intermittent operation. These motors can be used in nonimmersed state for short-term operation. When used with the optionally available cooling jacket, the motor is cooled by the passing fluid. This also enables dry well installation for permanent or intermittent operation. A sealing chamber protects the motor from fluid ingress. The filling fluid used is potentially biodegradable and environmentally safe. Cable lengths are available in length increments of 10 m. Sealing STS 65/...: Sealing on the fluid side is achieved by a bidirectional mechanical seal, while sealing on the motor side is achieved by a rotary shaft seal. STS 65 F...: Sealing on the fluid side and on the motor side is achieved by two independently operating mechanical seals. Options Type STS 65 F is available in a CS version with sheath current cooling, enabling dry well installation. Scope of delivery Pump ready for connection with 10 m connection cable and bare cable end Installation and operating instructions 138 Wilo Building Services catalogue 50 Hz Drainage and sewage Edition 2011/2012 Subject to change without prior notice
2 Series description Wilo-Drain STS 65 Accessories Suspension unit and floor supporting foot Chains Non-return valve and gate valve Switchgears and relays Duty chart H[m] 24 Wilo-Drain STS 65 Dewatering Q[m³/h] Q[l/s] Wilo Building Services catalogue 50 Hz Drainage and sewage Edition 2011/2012 Subject to change without prior notice 139
3 Pump curves, ordering information Wilo-Drain STS 65 Pump curves Wilo-Drain STS Hz rpm Vortex impeller - Free ball passage: 65 mm H[m] % 20%22% 24% 26% 28% 30% 32% 34% 35% 36% 14 37% STS 65/6 STS 65/22 STS 65/18 STS 65/14 STS 65/ Q[m³/h] Q[l/s] Pump curves in accordance with ISO 9906, Appendix A. The specified degrees of efficiency correspond to the overall efficiency. Information for order placements Wilo-Drain... Mains connection STS 65/6 1~230 V, 50 Hz L STS 65/6 3~400 V, 50 Hz L STS 65/10 3~400 V, 50 Hz L STS 65/14 3~400 V, 50 Hz L STS 65/18 3~400 V, 50 Hz L STS 65/22 3~400 V, 50 Hz L = supply availability, L = stock article, C = order-specific production approx. 2 weeks, K = order-specific production approx. 4 weeks, A = delivery time on request 140 Wilo Building Services catalogue 50 Hz Drainage and sewage Edition 2011/2012 Subject to change without prior notice
4 Technical data Wilo-Drain STS 65 STS 65/6 STS 65/6 STS 65/10 STS 65/14 STS 65/18 STS 65/22 1~230 V, 50 Hz 3~400 V, 50 Hz 3~400 V, 50 Hz 3~400 V, 50 Hz 3~400 V, 50 Hz 3~400 V, 50 Hz Unit Pressure connection DN 65/DN 80 DN 65/DN 80 DN 65/DN 80 DN 65/DN 80 DN 65/DN 80 DN 65/DN 80 Free ball passage mm Max. volume flow Q max / m 3 /h Max. delivery head H max / m Operating mode (immersed) S1 S1 S1 S1 S1 S1 Operating mode (non-immersed) Max. immersion depth m Protection class IP 68 IP 68 IP 68 IP 68 IP 68 IP 68 Fluid temperature T / C Weight approx. m / kg Motor data Nominal current I N / A Starting current I A / A Nominal motor power P 2 / kw Power consumption P 1 / kw Activation type Direct Direct Direct Direct Direct Direct Nominal speed n / rpm Insulation class F F F F F F Recommended switching frequency 1/h Max. switching frequency 1/h Permitted voltage tolerance % +/- 10 +/- 10 +/- 10 +/- 10 +/- 10 +/- 10 Cable Length of connecting cable m Cable type H07RN-F H07RN-F H07RN-F H07RN-F H07RN-F H07RN-F Cable cross-section mm 2 4x1,5 6x1,5 7x1,5 7x1,5 7x1,5 7x1,5 Type of connecting cable Detachable Detachable Detachable Detachable Detachable Detachable Mains plug Shock-proof Equipment/function Float switch Motor protection WSK WSK WSK WSK WSK WSK Explosion protection Materials Static seal NBR NBR NBR NBR NBR NBR Impeller EN-GJL-250 EN-GJL-250 EN-GJL-250 EN-GJL-250 EN-GJL-250 EN-GJL-250 Sealing on motor side NBR NBR NBR NBR NBR NBR Mechanical seal SiC/SiC SiC/SiC SiC/SiC SiC/SiC SiC/SiC SiC/SiC Motor housing Pump housing EN-GJL-250 EN-GJL-250 EN-GJL-250 EN-GJL-250 EN-GJL-250 EN-GJL-250 Pump shaft Dewatering P 1 refers to the maximum power consumption. All of the data apply to 1~230 V or 3~400 V, 50 Hz and a density of 1 kg/dm 3. Wilo Building Services catalogue 50 Hz Drainage and sewage Edition 2011/2012 Subject to change without prior notice 141
5 Pump curves, ordering information Wilo-Drain STS 65 Pump curves Wilo-Drain STS 65 F - 50 Hz rpm Vortex impeller - Free ball passage: 65 mm H[m] % 18% 22% 26% 28% 30% 32% 16 34% 36% 38% 12 8 STS 65F22.70/40 STS 65F18.70/37 4 STS 65F14.65/28 STS 65F10.60/24 STS 65F6.60/ Q[m³/h] Q[l/s] Pump curves in accordance with ISO 9906, Appendix A. The specified degrees of efficiency correspond to the overall efficiency. Information for order placements Wilo-Drain... Mains connection STS 65 F 6.60/19 Ex 3~400 V, 50 Hz L STS 65 F 10.60/24 Ex 3~400 V, 50 Hz L STS 65 F 14.65/28 Ex 3~400 V, 50 Hz L STS 65 F 18.70/37 Ex 3~400 V, 50 Hz L STS 65 F 22.70/40 Ex 3~400 V, 50 Hz L STS 65 F 6.60/19 CS Ex 3~400 V, 50 Hz L STS 65 F 10.60/24 CS Ex 3~400 V, 50 Hz L STS 65 F 14.65/28 CS Ex 3~400 V, 50 Hz L STS 65 F 18.70/37 CS Ex 3~400 V, 50 Hz L STS 65 F 22.70/40 CS Ex 3~400 V, 50 Hz L = supply availability, L = stock article, C = order-specific production approx. 2 weeks, K = order-specific production approx. 4 weeks, A = delivery time on request 142 Wilo Building Services catalogue 50 Hz Drainage and sewage Edition 2011/2012 Subject to change without prior notice
6 Technical data Wilo-Drain STS 65 STS 65 F 6.60/ 19 Ex STS 65 F 10.60/ 24 Ex STS 65 F 14.65/ 28 Ex STS 65 F 18.70/ 37 Ex STS 65 F 22.70/ 40 Ex 3~400 V, 50 Hz 3~400 V, 50 Hz 3~400 V, 50 Hz 3~400 V, 50 Hz 3~400 V, 50 Hz Unit Pressure connection DN 65/DN 80 DN 65/DN 80 DN 65/DN 80 DN 65/DN 80 DN 65/DN 80 Free ball passage mm Max. volume flow Q max / m 3 /h Max. delivery head H max / m Operating mode (immersed) S1 S1 S1 S1 S1 Operating mode (non-immersed) Max. immersion depth m Protection class IP 68 IP 68 IP 68 IP 68 IP 68 Fluid temperature T / C Weight approx. m / kg Motor data Nominal current I N / A Starting current I A / A Nominal motor power P 2 / kw Power consumption P 1 / kw Activation type Direct Direct Direct Direct Direct Nominal speed n / rpm Insulation class F F F F F Recommended switching frequency 1/h Max. switching frequency 1/h Permitted voltage tolerance % +/- 10 +/- 10 +/- 10 +/- 10 +/- 10 Cable Length of connecting cable m Cable type NSSHÖU NSSHÖU NSSHÖU NSSHÖU NSSHÖU Cable cross-section mm 2 7x1,5 7x1,5 7x1,5 7x1,5 7x1,5 Type of connecting cable Detachable Detachable Detachable Detachable Detachable Mains plug Equipment/function Float switch Motor protection WSK WSK WSK WSK WSK Explosion protection ATEX ATEX ATEX ATEX ATEX Materials Static seal NBR NBR NBR NBR NBR Impeller EN-GJL-250 EN-GJL-250 EN-GJL-250 EN-GJL-250 EN-GJL-250 Sealing on motor side C/Cr C/Cr C/Cr C/Cr C/Cr Mechanical seal SiC/SiC SiC/SiC SiC/SiC SiC/SiC SiC/SiC Motor housing Pump housing EN-GJL-250 EN-GJL-250 EN-GJL-250 EN-GJL-250 EN-GJL-250 Pump shaft Dewatering P 1 refers to the maximum power consumption. All of the data applies to 3~400 V, 50 Hz and a density of 1 kg/dm 3. Wilo Building Services catalogue 50 Hz Drainage and sewage Edition 2011/2012 Subject to change without prior notice 143
7 Dimensions Wilo-Drain STS 65 Dimension drawing Wilo-Drain STS 65 - stationary wet well installation for DN 65 + ø 2000 ø " (Ø33.7x3.25) C* **>65 >85 > Dimension drawing Wilo-Drain STS 65 - stationary wet well installation for DN 80 + ø 2000 ø x1¼" (Ø42.4x3.25) >80 265** > > D* 144 Wilo Building Services catalogue 50 Hz Drainage and sewage Edition 2011/2012 Subject to change without prior notice
8 Dimensions Wilo-Drain STS 65 Dimension drawing Wilo-Drain STS 65...CS - stationary dry well installation Dewatering min. min. 110 ~ > Dimension drawing Wilo-Drain STS 65 - portable wet well installation DN 65/DN 80 A B Wilo Building Services catalogue 50 Hz Drainage and sewage Edition 2011/2012 Subject to change without prior notice 145
9 Dimensions Wilo-Drain STS 65 Dimensions Wilo-Drain... Dimensions A B C D mm STS 65/ STS 65/ STS 65/ STS 65/ STS 65/ STS 65/ STS 65 F 6.60/19 Ex STS 65 F 10.60/24 Ex STS 65 F 14.65/28 Ex STS 65 F 18.70/37 Ex STS 65 F 22.70/40 Ex STS 65 F 6.60/19 CS Ex STS 65 F 10.60/24 CS Ex STS 65 F 14.65/28 CS Ex STS 65 F 18.70/37 CS Ex STS 65 F 22.70/40 CS Ex *Minimum water level in immersed operating mode; ** Minimum water level in non-immersed operating mode 146 Wilo Building Services catalogue 50 Hz Drainage and sewage Edition 2011/2012 Subject to change without prior notice
10 Mechanical accessories Wilo-Drain STS Suspension unit 2 Non-return valve 3 Gate valve 4 Pipe bend 5 Mounting accessories 6 Chain Dewatering 1 Stationary wet well installation Suspension unit DN 80 Made of EN-GJL-250, painted, with free passage in DN 80, foot elbow incl. pump bracket, profile joint, installation and floor fixation accessories and guide pipe bracket Ø 1¼" without guide pipes. Connection on pressure side DN 80/65. Flanges PN 10/16 in accordance with DIN The double pipe feed Ø 1¼" is to be provided by the customer Suspension unit DN 65, including cable guide Made of EN-GJL-250, with free passage in DN 65, foot elbow including pump holder, profile joint, installation and floor fixation accessories and guide pipe bracket Ø 1" without guide pipe. 7 m guide cable for 3.5 m installation depth. 5 m chain, galvanised steel, including shackle made of stainless steel. Connection on pressure side DN 65/80. Installation possible onsite with guide pipe Ø 1" as an alternative Non-return valve 218* 240 Made of EN-GJL-250, in accordance with DIN EN , with non-constricted passage, cleaning aperture and ventilation device, incl. 1 set of mounting accessories, PN 10/16 flange in accordance with DIN 2501, for DN 65 connection * Made of EN-GJL-250, in accordance with DIN EN , with non-constricted passage, cleaning aperture and ventilation device, incl. 1 set of mounting accessories, PN 10/16 flange in accordance with DIN 2501, for DN 80 connection Wilo Building Services catalogue 50 Hz Drainage and sewage Edition 2011/2012 Subject to change without prior notice 147
11 Mechanical accessories Wilo-Drain STS 65 Stationary wet well installation 295 Made of EN-GJL-250, incl. 1 set of mounting accessories, PN 10/16 flange in accordance with DIN 2501, DN Gate valve Made of EN-GJL-250, incl. 1 set of installation accessories, PN 10/16 flanges in accordance with DIN 2501, DN Made of spheroidal cast iron , with 2 flanges, including 1 set of mounting accessories, PN 10/16 flange, DIN 28637, for DN 65 connection Pipe bend Made of spheroidal cast iron , with 2 flanges, including 1 set of mounting accessories, PN 10/16 flange, DIN 28637, for DN 80 connection Y-piece DN For double-pump systems made of steel, galvanized, PN 10/16 flange in accordance with DIN 2501 with 2 sets of mounting accessories, DN 65/65/65 connection Wilo Building Services catalogue 50 Hz Drainage and sewage Edition 2011/2012 Subject to change without prior notice
12 Mechanical accessories Wilo-Drain STS 65 Stationary wet well installation Y-piece DN For double-pump systems made of steel, galvanized, PN 10/16 flange in accordance with DIN 2501 with 2 sets of mounting accessories, DN 80/80/80 connection Dewatering Mounting accessories DN 65 For a DN 40/50 flange connection, with 4 screws, 4 nuts and 1 flat gasket for PN 10/ 16 flange, DIN Mounting accessories DN 80 For a DN 80 flange connection, with 8 screws, 8 nuts and 1 flat gasket for PN 10/16 flange, DIN Chain set PCS-CE As chain sling including 2 shackles to DIN Material: galvanised steel, bearing capacity: 400 kg, length: 5 m As chain sling including 2 shackles to DIN Material: galvanised steel, bearing capacity: 400 kg, length: 10 m Wilo Building Services catalogue 50 Hz Drainage and sewage Edition 2011/2012 Subject to change without prior notice 149
13 Mechanical accessories Wilo-Drain STS Pipe bend 6 Chain Floor supporting food 11 Adapter 12 Hose connection Storz pipe coupling 14 Storz hose coupling 15 Pressure hose Portable wet well installation 165 G 2½ 176 R 2½ Made of steel, galvanized with G 2 / R 2 female/male thread for DN 65 connection Pipe bend Made of EN-GJL-250, with hose nozzle (Ø 70 mm) for direct hose connection, flange on pump side, incl. 1 set of mounting accessories for DN 65 connection Ø Ø344 Floor supporting foot Made of steel (S235JR), painted, consisting of 3 support feet, 1 baseplate and fixation material Ø Wilo Building Services catalogue 50 Hz Drainage and sewage Edition 2011/2012 Subject to change without prior notice
14 Mechanical accessories Wilo-Drain STS 65 Portable wet well installation Rp 2½ Adapter DN 65 - Rp 2½ Made of steel, galvanized, DN 65 threaded flange, PN 10/16, DIN 2566 with Rp 2½ female thread, incl. 1 set of mounting accessories for DN 65 connection Dewatering Hose connection G 2½ 100 Ø 70 Made of brass, hose nozzle (Ø 70 mm), including hose clip, R 2 ½ male thread for direct hose connection Pressure hose Synthetic, inner Ø 70 mm, PN 8, length 10 m, incl. hose clip for direct hose connection via hose nozzle, Ø 70 mm Chain set PCS-CE As chain sling including 2 shackles to DIN Material: galvanised steel, bearing capacity: 400 kg, length: 5 m As chain sling including 2 shackles to DIN Material: galvanised steel, bearing capacity: 400 kg, length: 10 m Portable wet well installation with Storz coupling 165 G 2½ Pipe bend R 2½ Made of steel, galvanized with G 2 / R 2 female/male thread for DN 65 connection Storz pipe coupling 66 Made of aluminium, Storz C connection, with G 2½ male thread, tappet clearance 66 mm for a DN 65 connection G 2½ 90 Storz hose coupling 66 Ø 45 Ø 52 Made of aluminium, Storz A connection, with hose nozzle (Ø 52 mm), tappet clearance 66 mm, incl. hose clip Pressure hose Synthetic, inner Ø 52 mm, PN 8, length 10 m, incl. hose clip for direct hose connection via hose nozzle (Ø 50 mm) or a Storz C hose coupling Chain set PCS-CE As chain sling including 2 shackles to DIN Material: galvanised steel, bearing capacity: 400 kg, length: 5 m Wilo Building Services catalogue 50 Hz Drainage and sewage Edition 2011/2012 Subject to change without prior notice 151
15 Mechanical accessories Wilo-Drain STS 65 Portable wet well installation with Storz coupling Chain set PCS-CE As chain sling including 2 shackles to DIN Material: galvanised steel, bearing capacity: 400 kg, length: 10 m Ø Floor supporting foot Ø344 Made of steel (S235JR), painted, consisting of 3 support feet, 1 baseplate and fixation material Ø Rp 2½ Adapter DN 65 - Rp 2½ Made of steel, galvanized, DN 65 threaded flange, PN 10/16, DIN 2566 with Rp 2½ female thread, incl. 1 set of mounting accessories for DN 65 connection Wilo Building Services catalogue 50 Hz Drainage and sewage Edition 2011/2012 Subject to change without prior notice
16 Mechanical accessories Wilo-Drain STS Non-return valve 3 Gate valve 17 Installation kit min min Compensator Dewatering 17 Stationary vertical dry well installation Non-return valve 240* Made of EN-GJL-250, in accordance with DIN EN , with non-constricted passage, cleaning aperture and ventilation device, incl. 1 set of mounting accessories, PN 10/16 flange in accordance with DIN 2501, for DN 80 connection Gate valve 295 Made of EN-GJL-250, incl. 1 set of installation accessories, PN 10/16 flanges in accordance with DIN 2501, DN Installation kit STS Made of EN-GJL-250, comprising 2 pipe bends with support (pressure and inlet side), each with 2 flanges for DN 80 connection, incl. installation and floor fixation accessories Wilo Building Services catalogue 50 Hz Drainage and sewage Edition 2011/2012 Subject to change without prior notice 153
17 Mechanical accessories Wilo-Drain STS 65 Stationary vertical dry well installation Compensator DN 80 Made of steel, galvanized / neoprene incl. mounting accessories, length 130 mm, PN 10/16 flange for DN 80 connection Y-piece DN For double-pump systems made of steel, galvanized, PN 10/16 flange in accordance with DIN 2501 with 2 sets of mounting accessories, DN 80/80/80 connection Wilo Building Services catalogue 50 Hz Drainage and sewage Edition 2011/2012 Subject to change without prior notice
Data sheet: Wilo-Drain TP 50 E 101/5,5 (1~230 V)
Data sheet: Wilo-Drain TP 50 E 101/5,5 (1~230 V) Pump curves Wilo-Drain TP 50 E - 50 Hz - 2900 rpm Unit Max. delivery head H max 9.5 m Max. volume flow Q max 26 m 3 /h Optimal delivery head H opt 5.0 m
More informationSeries description: Wilo-Drain VC
Series description: Wilo-Drain VC 0H[m] 18 16 14 12 10 8 6 4 2 VC 32/10 Wilo-Drain VC 0 2 4 6 8 10 12 VC 40/20 Q[m³/h] Design Vertically-mounted drainage pump (pedestal pump with IE2 motor) Application
More informationData sheet: Wilo-Drain TP 65 E 114/11 (1~230 V)
Data sheet: Wilo-Drain TP 65 E 114/11 (1~230 V) Pump curves Wilo-Drain TP 65 E - 50 Hz - No. of poles: 2 Unit Max. delivery head H max 15.0 m Max. volume flow Q max 52.0 m 3 /h Optimal delivery head H
More informationSeries description: Wilo-Sub TWU 3 HS
Series description: Wilo-Sub TWU 3 HS Design Submersible pump, multistage Application For private water supply from boreholes, wells and rainwater storage tanks For domestic water supply, sprinkling and
More informationSeries description: Wilo-Jet HWJ
Series description: HWJ 2 Design Self-priming water-supply unit Application Water supply Sprinkling Irrigation and spraying Pumping water from wells and out of low-lying tanks Type key Example: H WJ HWJ
More informationRevision 2.0 Parts List Minor
Revision.0 www.grindex.com Parts List 803.8 Minor Table of Contents Table of Contents Introduction... Specially approved products... Product Description...3 Products included... 3 The data plate...3 Exploded
More informationRevision 1.0 Parts List Minor
Revision.0 www.grindex.com Parts List 803.8 Minor Table of Contents Table of Contents Introduction... Specially approved products... Product Description...3 The data plate...3 Parts... 4 Exploded view...
More informationHigh efficiency pumps with LCD display electronically controlled HEP Optimo L series, H2 product group
High efficiency pumps with LCD display electronically controlled HEP Optimo L series, H2 product group indicate which mode has been active or selected. By pressing the activation pushbutton for more than
More informationCONTACT-DUO-PROFILE. Contact-Duo-Profile overview
13 6.3 13 6.3 4.7 20.7 24.6 +1/-0 24.6 +1/-0 2.5 24.6 +1/-0 20.7 4.3 +0.3-0.4 3.6 ±0.3 32.5 32.5 32.5 5 2 CONTACT-DUO-PROFILE Contact-Duo-Profile overview 13 6.3 13 6.3 4.7 2.5 16±0.8 4.7 2.5 4.7 2.5 2.6
More informationRoots pumps with a pumping speed of 280 to 840 m 3 /h: Okta 500 DUO DN1 DN B A
3.1 Vacuum generation / / Convection cooled OktaLine Okta 500 with a pumping speed of 280 to 840 m 3 /h: High-performance Roots pump with a pumping speed of 280 to 840 m 3 /h With 3-phase motor, IE2 No
More informationPhone Horizontal Multistage Pumps Horizontal Stainless Steel Multistage Pumps 3, 6, 9 m³/h
Horizontal Stainless Steel Multistage Pumps 3, 6, 9 m³/h Horizontal Multistage Pumps 50 Hz Stainless Steel 3-9 m3/h Model Number Explanation Example: 3AMH2B-51 3 = m 3 /h AMH = Series 2 = # of Stages
More informationRevision 2.0 Parts List Minette 1~, 3~
Revision.0 www.grindex.com Parts List 80.7 Minette ~, 3~ Table of Contents Table of Contents Introduction... Specially approved products... Product Description...3 Products included... 3 The data plate...3
More informationRevision 1.0 Parts List Mini
Revision.0 www.grindex.com Parts List 822.2 Mini Table of Contents Table of Contents Introduction... 2 Specially approved products...2 Product Description...3 Products included... 3 The data plate...3
More informationMechanical flow switch for On/Off control
Mechanical flow switch for On/Off control Economic integration in pipe systems without any additional piping Magnetic measuring principle Mechanical adjustment of setpoint Type 8010 can be combined with...
More informationRevision 3.0 Parts List Minex 1~ Minex Lite, Minex 3~
Revision 3.0 www.grindex.com Parts List 80.60 Minex ~ 80.7 Minex Lite, Minex 3~ Table of Contents Table of Contents Introduction... Specially approved products... Product Description...3 Products included...
More informationRevision 3.0 Parts List Salvador 1~, 3~
Revision 3.0 www.grindex.com Parts List 809.8 Salvador ~, 3~ Table of Contents Table of Contents Introduction... Specially approved products... Product Description...3 Products included... 3 The data
More informationRevision 1.0 Parts List Salvador 1~, 3~
Revision.0 www.grindex.com Parts List 809.8 Salvador ~, 3~ Table of Contents Table of Contents Introduction... Specially approved products... Product Description...3 The data plate...3 Parts... 4 Exploded
More informationImmersion Pumps HCT (High Chem) sealless
Immersion Pumps HCT (High Chem) sealless 1-6004-US Centrifugal pumps of plastic for a wide variety of industrial fluids Technical data Delivery rate Q max = 120 l/min Delivery head H max = 32 m Temperature
More informationOkta 600, Roots pump, 230/400 V, 50 Hz; 265/460 V, 60 Hz
Okta 600, Roots pump, 230/400 V, 50 Hz; 265/460 V, 60 Hz Okta 600, Roots pump, 230/400 V, 50 Hz; 265/460 V, 60 Hz Similar Image Dimensions Technical Data Ambient temperature 5-40 C Cooling method, standard
More informationPumps, Systems and Components for Building Services, Water Management and Industry
2015 Australia (50Hz) Wilo Price Book Pumps, Systems and Components for Building Services, Water Management and Industry Effective 1 st May 2015 Goods & Services Tax not included. Subject to change. In
More informationOkta 1000, Roots pump without motor
Okta 1000, Roots pump without motor Okta 1000, Roots pump without motor Similar Image High-performance Roots pump with a pumping speed of 590 to 1,775 m 3 /h Without motor (coupling and motor lantern are
More informationSOGEVAC. Rotary Vane Vacuum Pumps single-stage, oil-sealed, m 3 x h -1 ( cfm)
SOGEVAC Rotary Vane Vacuum Pumps single-stage, oil-sealed, 10-1200 m 3 x h -1 (5.9-707 cfm) 172.02.02 Excerpt from the Product Section C02 Edition March 2007 Contents General Product Range, Features and
More informationPROPORTIONAL VALVES Sentronic plus
04GB-06/R0 PROPORTIONAL VALVES Sentronic plus with external pressure supply G / FEATURES Sentronic plus is a highly dynamical -way proportional valve with digital control. Sentronic plus stands for: Digital
More information2.9 Sigma/ 2 Plunger Metering Pumps
.9 Sigma/ Plunger Metering Pumps.9Sigma/ Plunger Metering Pumps.9.1 Sigma Plunger Metering Pumps The Sigma/ motor plunger metering pump has a high-strength inner metal housing for those component parts
More informationDMP 335. Industrial Pressure Transmitter. Welded, Dry Stainless Steel Sensor. accuracy according to IEC 60770: 0.5 % FSO.
DMP 5 Industrial Pressure Transmitter Welded, Dry Stainless Steel Sensor accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 6 bar up to 0... 600 bar Output signals -wire: 4... 0 ma -wire:
More informationSOGEVAC. Rotary Vane Vacuum Pumps single-stage, oil-sealed, m 3 x h -1 ( cfm) Central Vacuum Supply Systems
SOGEVAC Rotary Vane Vacuum Pumps single-stage, oil-sealed, 10-1200 m 3 x h -1 (5.9-707 cfm) Central Vacuum Supply Systems 172.02.02 Excerpt from the Product Section C02 Edition 2010 Contents General Product
More informationFlygt Handleiding voor installatie, bediening en onderhoud
Flygt 068 Handleiding voor installatie, bediening en onderhoud Table of Contents Table of Contents 1 Introduction... 1.1 Specially approved products... Product Description....1 The data plate.... Approvals...4.
More informationLMP 331 LMP 331. Screw-In Transmitter with piezoresistive Stainless Steel Sensor
LMP Screw-In Transmitter with piezoresistive Stainless Steel Sensor flush diaphragm hydrostatic level measurement of clean, thin fluid media nominal pressure ranges from 0... 40 mbar up to 0... 40 bar
More informationECOLINE UM 045 UMP 045 UMPC 045 Oil service simple, quick and compact with integrated particle monitor
Oil Service Units ECOLINE UM 045 UMP 045 UMPC 045 Oil service simple, quick and compact with integrated particle monitor Easy filling, cleaning and pumping over Unbeatable ergonomics, optimal handling
More informationGear Pump Units For single-line centralized lubrication systems
1-1202-EN Gear ump Units For single-line centralized lubrication systems MFE5-KW3-2 MFE5-KW6 MFE5-BW7 These units comprising the MFE Group are designed to supply the lubricant used in intermittently operated,
More information7 Lighting Technology
7 Lighting Technology Floodlight 09676E00 explosion protected floodlight for use in explosive gas atmospheres of Zone 2 as well as in areas with combustibledust of Zone 21 and Zone 22. Explosion protection
More informationWILO BRINGS THE FUTURE.
Pioneering for You 2017/18 Australia Wilo Price Book Pumps, Systems and Components for Building Services, Water Management and Industry WILO BRINGS THE FUTURE. Effective 1 st July 2017. Goods & Services
More informationDMP 331 DMP 331. Industrial Pressure Transmitter. for Low Pressure. Stainless Steel Sensor. Pressure Transmitter. Industrial. tri-matic.
DMP Industrial Pressure Transmitter for Low Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO Industrial Pressure Transmitter from 0... 00 mbar
More informationDS 400 P. Intelligent Electronic Pressure Switch in Hygienic Stainless Steel Ball Housing. on hygienic process connections
Intelligent Electronic Pressure Switch in Hygienic Stainless Steel Ball Housing Description The electronic pressure switch is the successful combination of hygienic process connections with flush welded
More informationSIDE CHANNEL BLOWERS. Voltage Δ / Y 2 V 230/ / / / / /460 - Current Δ / Y Revolutions
DB411/415/422/ DESCRIPTION Dutair blowers for pressure and vacuum are compact machines consisting of an electric motor with a built-on pump housing. The rotational speed of the impeller creates a high
More informationA PASSION FOR PERFECTION. OktaLine. The Power Pump Portfolio. Roots Pumps for Every Low and Medium Vacuum Application.
A PASSION FOR PERFECTION OktaLine The Power Pump Portfolio. Roots Pumps for Every Low and Medium Vacuum Application. OktaLine The Power Pump Portfolio. Roots Pumps for Every Low and Medium Vacuum Application.
More informationDMP 335 DMP 335. Industrial Pressure Transmitter. Welded, Dry Stainless Steel Sensor. Pressure Transmitter. Industrial
DMP 5 Industrial Pressure Transmitter Welded, Dry Stainless Steel Sensor accuracy according to IEC 60770: 0.5 % FSO Industrial Pressure Transmitter Nominal pressure from 0... 6 bar up to 0... 600 bar Output
More informationProduct Data Sheet 4656 EZ
The engineer's choice 4656 EZ INDEX 1 General... 3 2 Mechanics... 3 2.1 GENERAL... 3 2.2 CONNECTIONS... 4 3 Operating Data... 5 3.1 ELECTRICAL OPERATING DATA... 5 3.2 OPERATING DATA - ELECTRICAL INTERFACE
More informationAgilent High Capacity RV Pumps & Roots Pumping Systems
Agilent High Capacity RV Pumps & Roots Pumping Systems 2-3 MS-Series Rotary Vane Pumps 4-5 RPS-Series Roots Pumping Systems and RPK-Series Roots Pumping Kits 6-7 Typical Applications 8-15 Pump Models MS-Series
More informationSingle Point Flow Monitor SW118 SW119
SW8 SW9 SW8 SW9 Single point flow monitors with MIN/MAX monitoring function, suitable for water, oil, air and media with similar thermal conductivities (selectable by means of a medium switch). With either
More informationImmersion Pumps HCT (High Chem) sealless EN
Immersion Pumps HCT (High Chem) sealless 1 6004 EN Centrifugal pumps of plastic for a wide variety of industrial fluids Technical data Delivery rate Q max = 120 l/min Delivery head H max = 32 m Temperature
More informationAdmiss. counterpressure
in survey Multi-layer diaphragm technology High dosing accuracy Safe to run dry High quality materials Leakage-free Low maintenance User-friendly Integrable into automatic processes Manual stroke length
More information- special pressure ranges - variety of electrical and mechanical. Characteristics. - other versions on request
DMP Industrial Pressure Transmitter for Low Pressure piezoresistive stainless steel sensor O p t i o n : f l u s h v e r s i o n accuracy: 0.75 %, 0.5 %, 0.0 %, 0.05 % FSO BFSL (0.5 %, 0.5 %, 0. %, 0.
More informationModel KT 115 Cooling incubators with thermoelectric cooling
Model KT 115 Cooling incubators with thermoelectric cooling The KT series combines outstanding performance with impressive energy efficiency and environmental friendliness. The cooled incubators of the
More informationDS 200 P DS 200 P. Electronic Pressure Switch with Flush Process Connection
with Flush Process Connection piezoresistive pressure sensor up to independent contacts, configurable optional: analogue output Exprotection (for wire) cooling element up to 00 C nominal pressure ranges
More informationPanel-Mounted Thermostat
Data Sheet 602026 Page 1/7 Panel-Mounted Thermostat EM Series Special features Safety temperature monitor STW (STB) Safety temperature limiter STB Tested according to DIN EN 14597 and PED 2014/68/EU Brief
More informationProduct Data Sheet 8506 VW-691
The engineer's choice 8506 VW-691 INDEX 1 General... 3 2 Mechanics... 3 2.1 GENERAL... 3 2.2 CONNECTIONS... 4 3 Operating Data... 5 3.1 ELECTRICAL OPERATING DATA... 5 3.2 OPERATING DATA - ELECTRICAL INTERFACE
More informationGRUNDFOS alldos product information. The solution for complex dosing tasks
GRUNDFOS alldos product information The solution for complex dosing tasks Measurements Measurements a h d Electric actuator b Pneumatic actuator g e Ø 9mm k f i m 1 m 2 k j c n l 1 l 2 DMH model Measurements
More informationDMP 331i DMP 333i. Precision Pressure Transmitter. Stainless Steel Sensor. accuracy according to IEC 60770: 0.1 % FSO
DMP i DMP i Precision Pressure Transmitter Stainless Steel Sensor accuracy according to IEC 600: 0. % FSO from 0... 00 mbar up to 0... 600 bar Output signal wire:... 0 ma wire: 0 0 V others on request
More informationWater Supply. Catalogue Building Services
Catalogue Building Services Water Supply Pumps, pump systems and accessories for rain water utilisation, water supply, pressure boosting and raw water intake International edition 2011/2012-50 Hz Programme
More informationDMP 343. Industrial Pressure Transmitter. Without Media Isolation. accuracy according to IEC 60770: 0,35 % FSO. Nominal pressure
DMP 4 Industrial Pressure Transmitter Without Media Isolation accuracy according to IEC 60770: 0,5 % FSO Nominal pressure from 0... 0 mbar up to 0... 000 mbar Product characteristics excellent linearity
More informationParts List _2.1. Flygt /.890
Parts List 886754_2. Flygt 3069 3069.70/.890 Table of Contents Table of Contents Introduction... 2. Specially approved products... 2 2 Product Description...3 2. The data plate...3 2.2 Approvals...4 2.3
More informationDS 210. Electronic Pressure Switch. Without Media Isolation. accuracy according to IEC 60770: 0.35 % FSO. Nominal pressure
Without Media Isolation accuracy according to IEC 60770: 0. % FSO Nominal pressure from 0... 0 mbar up to 0... 000 mbar Contacts, or independent contacts freely configurable Analogue output wire:... 0
More informationGear Pump Units. For single-line lubrication systems
Gear Pump Units 1-1202-US For single-line lubrication systems MFE5-KW3-2 MFE5-BW3-2 MFE5-KW6 MFE5-BW7 These units comprising the MFE Group are designed to supply the lubricant used in intermittently operated,
More informationRoots * RAS-J Air & RGS-J Gas Blowers. GE Energy
GE Energy Roots * RAS-J Air & RGS-J Gas Blowers Wide range of performance for pressure and vacuum applications on air or gas service for both dry and wet (liquid injection) conditions. GE Energy s Roots
More informationFlygt D 8050, 50 Hz. Technical specification
Flygt D 8050, 50 Hz Technical specification Table of Contents Table of Contents D 8050... 2 Product... 2 Denomination... 2 Process data... 2 Motor data...2 Cable...2 Monitoring equipment... 2 Material...
More informationDMP 331i / DMP 333i LMP 331 i
DMP i / DMP i LMP i Precision Pressure Transmitter / Screwin transmitter Stainless Steel Sensor accuracy according to IEC 60770: 0. % FSO from 0... 00 mbar up to 0... 600 bar Output signal wire:... 0 ma
More informationDMP 331Pi. Precision. Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm. Pressure Transmitter.
Precision Pressure Transmitter Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm Version with cooling element accuracy according to IEC 0770: 0. % FSO Precision Pressure
More informationDATA SHEET MS 3780 MS3780_IT_EN_DS050REV01_IS
DATA SHEET MS 3780 INDEX OVERALL FEATURES 2 STANDARD FEATURES 2 OPTIONAL FEATURES 2 TECHNICAL DATA 2 OVERALL DIMENSIONS 3 LAYOUT 4 INSTALLATION 5 INSTALLATION RECOMMENDATIONS 6 SENSOR GROUNDING 7 SENSOR
More informationModel KT 53 Refrigerated incubators with thermoelectric refrigeration
Model KT 53 Refrigerated incubators with thermoelectric refrigeration The KT series combines outstanding performance with impressive energy efficiency and environmental friendliness. The refrigerated incubators
More informationProduct Data Sheet 4656 ZW
The engineer's choice 4656 ZW INDEX 1 General... 3 2 Mechanics... 3 2.1 GENERAL... 3 2.2 CONNECTIONS... 4 3 Operating Data... 5 3.1 ELECTRICAL OPERATING DATA... 5 3.2 OPERATING DATA - ELECTRICAL INTERFACE
More informationModel ED 23 Drying and heating chambers Classic.Line with natural convection
Model ED 23 Drying and heating chambers Classic.Line with natural convection The strengths of a BINDER ED series drying chamber include routine drying and sterilization tasks up to 300 C. Thanks to the
More informationParts List _2.1. Flygt /.190
Parts List 886747_2. Flygt 3069 3069.60/.90 Table of Contents Table of Contents Introduction... 2. Specially approved products... 2 2 Product Description...3 2. The data plate...3 2.2 Approvals...4 2.3
More informationModel FP 240 Drying and heating chambers Classic.Line with forced convection and program functions
Model FP 240 Drying and heating chambers Classic.Line with forced convection and program functions A BINDER material test chamber with mechanical convection of the FP series provides reliably short drying
More informationPanel-mounting Thermostats EM Series
Postal address: 3603 Fulda, Germany Phone: +44 279 6333 Fax: +44 279 63262 Phone: 3-697-JUMO -800-4-JUMO Fax: 3-697-867 Page /2 Panel-mounting Thermostats EM Series with, 2, 3 or 4 single-pole snap-action
More informationModel KT 53 Cooling incubators with thermoelectric cooling
Model KT 53 Cooling incubators with thermoelectric cooling The KT series combines outstanding performance with impressive energy efficiency and environmental friendliness. The cooled incubators of the
More informationMagnetic Stirrers Magnetic Stirr
Magnetic Stirrers Heidolph Magnetic Stirrers Product Line features 0 0 0 D 1 1 K 1 K8 HG 1 HG 1 K 2 2 S8 4 safety P/N 503-000-00 504-00011-00 504-03010-00 504-00-00 504-10-00 504-10108-00 504-40000-00
More informationCustomised complete installations Series 400 Compact, ecological and economic. Polydos 460
Product Information Compact, ecological and economic Polydos 412 KD 440 Polydos 460 Polydos 412 three-chamber installations with PLC and graphic display Convenient preparation and dosing of dry or liquid
More informationJUMO extherm-at Type , Explosion-proof surface-mounted thermostat for zones 1, 2, 21, and 22
Data Sheet 605055 Page 1/10 Type 605055, Explosion-proof surface-mounted thermostat for zones 1, 2, 21, and 22 Special features Single thermostat and double thermostat with capillary or rigid thermowell
More informationLPUM - Local Power Unit General. Product Data Sheet January 2013 SD E06
LPUM - Local Power Unit General Product Data Sheet January 2013 SD 1520-0E06 TM LPUM - Local Power Unit January 2013 Description The LPUM - (Local Power Unit) - is an integrated electro-hydraulic system
More informationGS-HYDRO END FORMING MACHINES
GS-HYDRO END FORMING MACHINES Main index Reshaping machine... 4 Pre-assembly machines... 5 Deburring machines... 6 Tube cutting machines... 7 Cleaning system... 8 3 Reshaping machine M-WF 385Xplus Walform
More informationMVSI-TS. Technical features
Technical features Power supply Three-phase voltage from 48V to 690V, 50Hz or 60Hz; suitable for use with an inverter from 20Hz to the base frequency, with constant torque load profile. Polarity 4, 6 and
More informationModel KBF 115 Constant climate chambers with large temperature / humidity range
Model KBF 115 Constant climate chambers with large temperature / humidity range The BINDER KBF is the specialist for unconditionally reliable stability testing and precise maintenance of constant climate
More informationFLOMAT. Flowmeters. Electromagnetic Insertion Flowmeter: Series. Instrumentation for fluids
Flowmeters Instrumentation for fluids Series FLOMT FLOMT Electromagnetic Insertion Flowmeter: Introduction For use in large diameter pipes or open channels as an economical solution for liquid metering.
More informationUp to 85% higher Service Life due to efficient sealing method.
Robot Accessories Feeding through Up to 85% higher Service Life due to efficient sealing method. 346 Robot Accessories Feeding through Feeding through DDF 2 Rotary Feed-through Series Size Page DDF 2 348
More informationPanel-mounting thermostats, type series EM
Data sheet 602025 Page /5 Panel-mounting thermostats, type series EM Particularities Operating temperature limiter Limit value range up to +650 C with temperature compensation Brief description Panel-mounting
More informationAbsolute Encoders Multiturn
The Sendix 5863 and 5883 multiturn encoders with SSI or BiSS-C interface and optical sensor technology can achieve a resolution of max. 29 bits. A through hollow shaft up to 4 mm and a blind hollow shaft
More informationScrew pump Series ALLFUEL AFT
Screw pump Series ALLFUEL AFT Utilization For pumping light and heavy fuel oil. Main field of application ALLFUEL Transfer (AFT) pumps are compact pump sets designed for closed circuit and transfer applications
More informationistep STEPPER MOTOR PUMP
PRODUCT INFORMATION istep STEPPER MOTOR PUMP innovative - intuitive - intelligent STEPPER MOTOR PUMP FOR DEMANDING METERING REQUIREMENTS istep - THE STEPPER MOTOR PUMP The new istep stepper motor pump
More informationDMP 339. Pressure Transmitter. with G ¼" flush diaphragm. Pressure Transmitter. Industrial. accuracy according to IEC 60770: 0.
DMP 9 Industrial Pressure Transmitter with G ¼" flush diaphragm accuracy according to IEC 60770: 0.5 % FSO Industrial Pressure Transmitter DMP 9 Nominal pressure from 0... 60 bar up to 0... 600 bar Output
More informationLinear flow control with actuator IFC
Linear flow control with actuator Product brochure GB 3 Edition 01.14 Linear relationship between adjustment angle and flow rate Large control ratio of 25:1 EC type-tested and certified Actuators IC 20
More informationFlygt /190. Parts List
Flygt 3127.160/190 Parts List Table of Contents Table of Contents Introduction...2 Purpose of this manual...2 Disclaimer...2 Data for ordering spare parts...2 Specially approved products...2 Qualification
More informationBimetal Temperature Switch
Phone: +44 19 635533 Fax: +44 19 635262 Data sheet 608301 Page 1/8 Bimetal Temperature Switch Special features Electromechanical temperature switch with a fixed switching temperature Protection type IP52,
More informationCOMBINATION UNITS MARCH 2018
COMBINATION UNITS MARCH 2018 2 COMBINATION UNITS STATIONARY SOCKET OUTLET COMBINATIONS Variants 5 Dimensions 6 Wall-mounted Distributor Boxes (plastic) Series 45 8 Wall-mounted Distributor Boxes (plastic)
More informationModel KBF 1020 Constant climate chambers with large temperature / humidity range
Model KBF 1020 Constant climate chambers with large temperature / humidity range The BINDER KBF is the specialist for unconditionally reliable stability testing and precise maintenance of constant climate
More informationDuo 65 M, 3-phase motor, 3TF, 230/400 V, 50 Hz; 265/460 V, 60 Hz
Duo 65 M, 3-phase motor, 3TF, 230/400 V, 50 Hz; 265/460 V, 60 Hz Duo 65 M, 3-phase motor, 3TF, 230/400 V, 50 Hz; 265/460 V, 60 Hz Similar Image Dual-stage, high-performance rotary vane pump with a pumping
More informationModular Lube Lubrication Systems System Controls
Model 84501 Program Timer Solid State Designed to control the lubrication cycle frequency of air-operated single-stroke pumps. Timer turns pump on/off at programmed intervals via a 3-way or 4-way air solenoid
More informationJUMO extherm-at Type , explosion-proof surface-mounted thermostat for zones 1, 2, 21, and 22
Data Sheet 605055 Page 1/8 Type 605055, explosion-proof surface-mounted thermostat for zones 1, 2, 21, and 22 Special features Single thermostat with capillary or rigid thermowell and double thermostat
More informationDrainage and Sewage. Catalogue Building Services
Catalogue Building Services Drainage and Sewage Pumps, pump systems and accessories for drainage and sewage, waste water collection, transport and dewatering International edition 2011/2012-50 Hz Contents
More informationLinear flow controls VFC Linear flow controls with actuator IFC
Linear flow controls VFC Linear flow controls with actuator Product brochure GB 3 Edition 01.16 Linear relationship between adjustment angle and flow rate Large control ratio of 25:1 Actuators IC 20 or
More informationNessie Coils for VDH and VDHT valves
Data Sheet Nessie Coils for VDH and VDHT valves Introduction The coils for the Danfoss High-Pressure Systems valves are high-performance and reliable coils based on more than 50 years manufacturing of
More informationLMP 305. Slimline Probe. Stainless Steel Sensor. accuracy according to IEC 60770: standard: 0.35 % FSO option: 0.25 % FSO.
Slimline Probe Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.35 % FSO option: 0.25 % FSO Nominal pressure from 0... mh 2 O up to 0... 250 mh 2 O Output signals 2-wire: 4... 20 ma
More informationModel KT 170 Cooling incubators with thermoelectric cooling
Model KT 170 Cooling incubators with thermoelectric cooling BENEFITS Safe and reproducible incubation conditions even at high environmental conditions Disinfection routine at 100 C Energy efficient, environmentally
More informationWelding equipment for the POLYSTIC system
L Welding equipment for the POLYSTIC system TITGEMEYER Tb1435GB(0110)2 Installation tools 355 Stud-welding machine TSG 60 for drawn-arc stud welding process The compactly-designed TSG 60 combines operating
More informationSTE Technic Project Engineering Services Trade Ltd. Co. General Information. Main Features. Proven Performance
Technic Cross-Flow Fans T R A N S F O R M E R C O O L I N G S O L U T I O N S Transformer Cross-Flow Fans General Information provides optimal solutions for air forced cooling of transformers. High performance
More informationwww.mete-enerji.com.tr INDUSTIAL IEC PLUGS AND SOCKETS INDUSTIAL IEC PLUGS AND SOCKETS Position of the Earthing Contact acc. to IEC 60309-2 225/400-265/460 V~ 60 Hz (1) 3 P+N+ 3 P+ 2 P+ 120/208-144/250V~
More informationTUC: Universal thermostat
Product data sheet 3.1 21.700 TUC: Universal thermostat How energy efficiency is improved Control, monitoring and limiting according to needs and with no auxiliary energy. Features Regulates and monitors
More informationPendant Light Fitting IEC Series 6470/2
> Available light sources high-pressure sodium lamps (HSE) metal halide lamps (HIE) halogen lamps (QT) > Versatile mounting methods > Enclosure made of saltwater-resistant aluminium www.stahl.de 11435E
More informationModel ED 400 Drying and heating chambers Classic.Line with natural convection
Model ED 400 Drying and heating chambers Classic.Line with natural convection BENEFITS Uniform drying conditions thanks to APT.line technology Identical test conditions throughout the chamber interior
More informationSeries 8800 Radial Tip Fans Design 8812
Bulletin 8800-2 October 1996 Series 8800 Radial Tip Fans Design 8812 Description Index Series 8800 Radial Tip Fans The Design 8812 Radial Tip fan is a reliable, highly efficient, heavy duty, rugged fan
More information