Product Number : Product Name : LCD Projector s of March 2009. Specifications subject to change without notice. < >
Specifications Power supply Power consumption Optical system LCD panel Lens Throw ratio Lamp Colors rightness* Center-to-corner uniformity ratio* Contrast ratio* Resolution RG Scanning frequency Projection size Optical axis shift Keystone correction range On-screen menu Installation uilt-in speakers Terminals Power cord length Cabinet material Dimensions (W x H x D) Weight* 2 Operating environment 00240 V C, 50/60 Hz 00 W (approx. W in standby mode with fan stopped. 28 W in standby mode when controlled by a Web browser.) Dichroic mirror separation/prism synthesis system Panel size 0.6 (6 mm) diagonal (4: aspect ratio) Display method Transparent LCD panel (x, R/G/) Drive method ctive matrix Pixels 786,42 (,024 x 768) x, total of 2,59,296 pixels Pixel configuration Stripe Manual zoom (::.2), manual focus F.7.9, f 8.522.2 mm.4.7: 220 W UHM lamp Full color (6,777,26 colors) 2,600 lumens 85% 500: (full on/full off),024 x 768 pixels (Input signals that exceed this resolution will be converted to,024 x 768 pixels.) RG Horizontal: 5.009.00 khz, Vertical: 5085 Hz YPPR 480i (525i): fh 5.75 khz; fv 60 Hz 576i (625i): fh 5.6 khz; fv 50 Hz 480p (525p): fh.50 khz; fv 60 Hz 576p (625p): fh.25 khz; fv 50 Hz 720/60p (750p): fh 45.00 khz; fv 60 Hz 080/60i (25i): fh.75 khz; fv 60 Hz 080/50i (25i): fh 28. khz; fv 50 Hz S-Video/Video NTSC, NTSC4.4, PL-M, PL60: fh 5.75 khz; fv 60 Hz PL, SECM, PL-N: fh 5.6 khz; fv 50 Hz 887,620 mm (00 inches) diagonally, 4: aspect ratio 5: (fixed) Vertical: approx. ±0 7 languages: English, French, German, Spanish, Italian, Korean, Russian, Chinese, Japanese, Swedish, Norwegian, Danish, Portuguese, Polish, Hungarian, Czech, and Thai Front/rear, ceiling/desk (menu selection) Size 4 x 2 cm, x, oval Output power.0 W (monaural) COMPUTER (RG) IN D-sub HD 5-pin x RG signal R, G, : 0.7 Vp-p, 75 Ω, Sync on green:.0 V [p-p], 75 Ω, HD/SY, VD: TTL (positive/negative polarity compatible) YPPR signal Y:.0 V [p-p] (including sync signal), 75 Ω, P, PR: 0.7 Vp-p, 75 Ω COMPUTER (RG) 2 IN/ OUT RG signal YPPR signal VIDEO IN S-VIDEO IN COMPUTER UDIO IN UDIO IN VRILE UDIO OUT SERIL Temperature Humidity D-sub HD 5-pin x (input/output selectable using on-screen menu) R, G, : 0.7 V [p-p], 75 Ω, Sync on green:.0 V [p-p], 75 Ω, HD/SY, VD: TTL (positive/negative polarity compatible) Y:.0 V [p-p] (including sync signal), 75 Ω, P, PR: 0.7 V [p-p], 75 Ω RC pin x,.0 Vp-p, 75 Ω Mini DIN 4-pin x, Y:.0 V [p-p], C: 0.286 V [p-p], 75 Ω M (L, R) x, 0.5 V [rms], for COMPUTER (RG) and 2 RC (L, R) x, 0.5 V [rms], for VIDEO and S-VIDEO M (L, R) x, 0 2.0 V [rms] D-sub 9-pin x, for external control (RS-22C) 2 m/6.6 Moulded plastic (PC+S) 68 x 88 x 2 mm (4-/2 x -5/2 x 9-/6 )* 2 pprox. 2.96 kg (6.5 lbs.) 0 40 C (2 04 F) 20%80% (no condensation) s of March 2009 < 2 >
Remote control unit Wireless LN Power supply Operation range* Dimensions (W x H x D) Weight* 2 Standard Modulation IEEE 802.b IEEE 802.g Transmission system IEEE 802.b IEEE 802.g Transmission speed IEEE 802.b IEEE 802.g Operating range* Frequency range Channels Wireless Manager ME 5.0 system requirements OS Web browser CPU Supplied accessories Optional accessories Memory Free hard disk space CD-ROM drive Wireless LN V DC ( battery x 2) pprox. 5 m (49 ) when operated from directly in front of the signal receptor 48 x 6 x 24.5 mm (-7/8 x 6-/2 x /2 ) pprox. 7 g (4. oz) (including batteries) IEEE 802.b/g (RI STD-T66) Direct sequence spread spectrum (DS-SS) system Orthogonal frequency division multiplex (OFDM) system CCK (/5.5 Mbps), DQPSK (2 Mbps), DPSK ( Mbps) 64-QM (54/48 Mbps), 6-QM (6/24 Mbps), QPSK (8/2 Mbps), PSK (9/6 Mbps) Mbps, 5.5 Mbps, 2 Mbps, Mbps 54 Mbps, 48 Mbps, 6 Mbps, 24 Mbps, 8 Mbps, 2 Mbps, 9 Mbps, 6 Mbps pprox. 0 m (98 5 ) PT-L80NTE/L80NTE: 2,42 MHz2,472 MHz PT-L80NTU: 2,42 MHz2,462 MHz PT-L80NTE/L80NTE: ch PT-L80NTU: ch To use network functions, a PC is required that meets the conditions given below. Microsoft Windows 2000 Professional SP4, Windows XP Professional, Windows XP Home Edition, Windows XP Tablet PC Edition 20050, Windows Vista Ultimate 2-bit, Windows Vista usiness 2-bit, Windows Vista Home Premium 2-bit, Windows Vista Home asic 2-bit pple Mac OS X 0.4 (Tiger) and OS X 0.5* (Leopard) NOTE: Some functions are not available with Windows Vista and Mac. Windows : Internet Explorer 6.0 or later, or Netscape Communicator 7.0 or later Mac OS: Safari 2.0 or later Windows : Intel Pentium III or higher, or other compatible processor ( GHz or higher is recommended.) Mac OS X: -GHz or higher PowerPC G4, or.8-ghz or higher Intel Core processor 256 M or more (52 M or higher is recommended for Mac OS X) 60 M or more CD-ROM drive or DVD drive IEEE 802.b/g compatible (built-in wireless LN system or external IEEE 802.b/g LN card must be installed and running normally.) NOTE: Some IEEE 802.g/b wireless LN may not allow connection to the projector. For Mac OS, uilt-in IEEE 802.b/g wireless LN adapter must be installed and running normally. Power cord Power cord secure lock Wireless remote control atteries for remote control VG cable for RG signals (.8 m/5 ) Carrying bag Wireless Manager ME 5.0 (CD-ROM) Replacement lamp unit: ET-L80 Ceiling mount bracket: ET-PK80 *: Measurement, measuring conditions, and method of notation all comply with ISO 28 international standards. *2: verage value. May differ depending on models. *: Operation range differs depending on environments. Weights and dimensions shown are approximate. Specifications subject to change without notice. Weights and dimensions shown are approximate. Specifications are subject to change without notice. This product may be subject to export control regulations. Intel and Pentium are registered trademarks of Intel Corporation. Microsoft, Windows Vista and Windows are either registered trademarks or trademarks of Microsoft Corp. in the United States and/or other countries. pple, Mac, Mac OS, Macintosh and Safari are trademarks of pple Inc., registered in the U.S. and other countries. ll other trademarks are the property of their respective trademark owners. Projection images simulated. s of March 2009 < >
Dimensions unit : mm (inch) NOTE: This illustration is not drawn to scale. 54.5 (2-5/2 ) (/8 ) 97 (-/6 ) 88 (-5/2 ) 2 (9-/6 ) 89 (-/2 ) 68 (4-/2 ) 9 (/2 ) 94 (7-5/8 ) Terminals COMPUTER IN SERIL 2 COMPUTER 2 IN/ OUT S-VIDEO IN VIDEO IN C IN~ S 4 7 L R 5 6 UDIO IN VRILE UDIO OUT COMPUTER UDIO IN COMPUTER (RG) input 2 COMPUTER (RG) 2 input/computer (RG) output S-Video input 4 Video input 5 udio input for Video/S-Video 6 udio output 7 udio input for COMPUTER /2 8 Serial 8 s of March 2009 < 4 >
-0 S P E C F I L E Standard setting-up positions unit : mm (inch) H Upper edge of projected image ø49 (-5/6 ) ø4 (-/6 ) 5747 (4-/6 7-7/2 ) djustable in 20-mm (5/2-inch) step. L Projected image L 7 (4-9/2 ) L: Distance to screen H: Height from the edge of screen to center of lens H Lower edge of projected image NOTE: W L 70 (2-/4 ) 65 (2-9/6 ) Illustrations show the projector installed using optional ceiling bracket. This illustration is not drawn to scale. Projected image 8 (-/6 ) Projection size (diagonal) Projection distance (L) Min (wide) Max (telephoto) Height from the edge of screen to centre of lens (H) * This distance is especially recommended for ceiling-mounted use and other permanent installations. 0.84 m /.02 m / 40.27 m / 50.52 m / 60.78 m / 70 2.0 m / 80 2.29 m / 90 2.54 m / 00.05 m / 20.8 m / 50 5.08 m / 200 6.5 m / 250 7.62 m / 00 /. m /.7.4 m / 4.7.7 m / 5.6 2.0 m / 6.6 2. m / 7.6 2.6 m / 8.5 2.9 m / 9.5.5 m /.4 4. m / 4. 5.8 m / 9.0 7. m / 2.8 8.7 m / 28.6. m /.7.4 m / 4.5.7 m / 5.6 2. m / 6.8 2.4 m / 7.9 2.8 m / 9.. m / 0.2.5 m /.4 4.2 m /.7 5.2 m / 7. 7.0 m / 22.9 8.7 m / 28.7 0.5 m / 4.4 0.08 m / 0.28 0.0 m / 0. 0. m / 0.42 0.5 m / 0.50 0.8 m / 0.58 0.20 m / 0.67 0.2 m / 0.75 0.25 m / 0.8 0.0 m /.00 0.8 m /.25 0.5 m /.67 0.64 m / 2.08 0.76 m / 2.50 NOTE: Values shown are approximate. The value for L (distance to screen) varies slightly depending on the zoom lens characteristics. When the shortest projection distance is used, a small amount of distortion may occur in the image due to the zoom lens characteristics. Calculation of the projection distance For a screen size different from the above, use the equation below to calculate the projection distance. spect ratio 4 : minimum L (m) = (diagonal screen size in inches) x 0.0292 0.06 maximum L (m) = (diagonal screen size in inches) x 0.05 0.044 Installable ngle NOTE: Distances calculated with the above equations will include a slight error. Install the projector at an angle within the range shown below. Vertical direction The projector may be installed at a vertical angle of ±0. +0 Vertical direction The projector may not be angled horizontally. 0 s of March 2009 < 5 >
Computer data compatibility This projector accepts up to 9 khz horizontal scanning frequency and 62 MHz dot clock. NOTE: Pixel thinning is applied to signals that exceed a dot clock frequency of 0 MHz. The display resolution of this projector is,024 x 768 pixels. Input signals that exceed this resolution will be converted to,024 x 768 pixels. List of compatible signals Display mode Display resolution (dots) Scanning frequency H V (khz) (khz) Dot clock frequency (MHz) Picture quality 2 Input terminal NTSC/NTSC4.4/PL-M/PL60 PL/PL-N/SECM 525i (480i) 625i (576i) 525p (480p) 625p (576p) 750 (720)/60p 750 (720)/50p 25 (080)/60i 25 (080)/50i VES70 VES85 VG60 VG65 VG72 VG75 VG85 SVG55 SVG60 SVG70 SVG75 SVG85 MC6 XG50 XG60 XG70 XG75 XG85 WXG768 WXG800 MXG70 MXG75 MXG85 MC2 MSXG60 SXG60 SXG75 SXG85 SXG60+ WXG+ UXG60 WSXG+ WUXG 720 x 480i 720 x 576i 720 x 480i 720 x 576i 720 x 48 720 x 576 280 x 720 280 x 720 920 x 080i 640 x 400 640 x 480 800 x 600 82 x 624 024 x 768 280 x 768 280 x 800 52 x 864 52 x 870 280 x 960 280 x 024 400 x 050 440 x 900 600 x 200 680 x 050 920 x 200 5.7 5.6 5.7 5.6.5. 45.0 7.5.8 28..5 7.9.5 5.0 7.9 7.5 4. 5.2 7.9 48. 46.9 5.7 49.7 9.6 48.4 56.5 68.7 9.6 47.8 4. 49. 49.7 64.0 67.5 76.7 68.7 64.0 80.0 9. 64.0 65. 55.9 65. 74.6 70. 85. 66.7 72.8 85.0 56. 60. 72.2 85. 74.6 50. 70. 85.0 49.9 60.2 59.8 7.2 74.9 85.0 75. 85.0.5.5 27.0 27.0 74. 74. 74. 74. 25.2.5 25.2 0.2.5.5 6.0 6.0 40.0 49.5 56. 57. 5.9 65.0 78.8 94.5 65. 79.5 68.0 69. 8.5 94.2 08.0 2.5 00.0 08.0 08.0 5.0 57.5 08.0 22.4 06.5 62.0 46. 9. VIDEO/S-VIDEO COMPUTER (RG/YPPR) COMPUTER (RG/YPPR) COMPUTER (RG/YPPR) COMPUTER (RG only). The i appearing after the resolution indicates an interlaced signal. 2. The following symbols are used to indicate picture quality. Maximum picture quality can be obtained. Signals are converted by the image processing circuit before picture is projected. Signals are compressed by the image processing circuit before picture is projected.. When 750 (720)/60p or 750 (720)/50p signals are input to a computer input terminal, images are projected in the WIDE750 (720) format. e sure to run the auto setup function. s of March 2009 < 6 >
Serial connector The serial connector complies with RS-22C. To control the projector from a personal computer, commands must be input through communication software, based on the format and satisfying the communication conditions shown below. Pin assignments and signal names 6 9 5 No. 2 4 5 Signal name TXD RXD GND Description Send data Receive data Connected internally Ground No. 6 7 8 9 Signal name CTS RTS Signal name Connected internally Connected internally D-sub HD 9-pin, female Communication conditions (factory setting) Signal level Synchronization method aud rate Parity Character length Stop bit X parameter S parameter RS-22C-compliant Start-stop synchronization 9,600 bps None 8 bits bit None None asic format Transmission from the computer begins with STX, then the ID, command, parameter, and ETX are sent in this order. dd parameters according to the details of control. STX C C2 C : P P2 P P4 ETX Start ( byte) Colon ( byte) Parameter (-4 bytes) Command ( bytes) (Control and/or query commands) End ( byte) CUTION It may not be possible to send or receive commands for about 0 to 60 seconds when the lamp is first turned on. If this occurs, wait for 60 seconds, then try sending or receiving again. When sending multiple commands, be sure to wait for at least 0.5 second after receiving a response from the projector before sending the next command. dditional time is sometimes required for response due to processing inside the projector. Set the time-out period for command response to 0 seconds or more. NOTE: If a wrong command is received, the projector will send an ER40 command to the computer. When sending commands without parameters, a colon (:) is not necessary. Cable specifications Projector PC (DTE) 2 2 4 4 5 5 6 DSR 6 7 7 8 8 9 9 s of March 2009 < 7 >
Control commands Command: <Parameter> Function Callback: <Parameter> Parameter value Min Max PON* POF* VL: IIS:<input signal> OST OFZ:<off on> OEN OXG:<off on> VPM:<NT> VPM:<STD> VPM:<DYN> VPM:<D> VXX:DLVI0=<+00000> VXX:DLVI0=<+0000> VXX:DLVI0=<+00002> UU UD OMN OCU OCD OCL OCR OS OSH* / * 2 OIX DZU DZD Power on (standby mode on) Power off (standby mode off) Volume control Input signal selection The same function as default button Freeze Enter Wide mode Picture mode: Natural Picture mode: Standard Picture mode: Dynamic Picture mode: lackboard Daylight View: Off Daylight View: uto Daylight View: On Volume up Volume down Menu Cursor up Cursor down Cursor left Cursor right uto setup V mute Index window Digital zoom: Enlargement Digital zoom: Reduction PON POF VL: IIS:<input signal> OST OFZ:<off_on> OEN OXG:<off_on> VPM:<NT> VPM:<STD> VPM:<DYN> VPM:<D> VXX:DLVI0=<+00000> VXX:DLVI0=<+0000> VXX:DLVI0=<+00002> UU UD OMN OCU OCD OCL OCR OS OSH OIX DZU DZD * Do not send PON, POF, or OSH commands continuously in a short period of time. Doing so may burst the lamp or shorten the lamp replacement cycle. 2 * When a command other than OSH is sent while the shutter function is operating, the projector will send an ER40 command in reply and release the shutter function. Status asking commands Command Description Callback <Parameter> QPW Q$S QIN QV QVC QVÇs QV QVR QVS QWR QWG QW QHP QÇuP QCP QDC QSP QLG QXG QVX:DLVI0 QPM QFZ Q$L QSH QKS QTE Standby power status Lamp status Input signal status Volume adjustment value Color adjustment value Tint adjustent value rightness adjustment value Contrast adjustment value Sharpness adjustment value White balance: R adjustment value White balance: G adjustment value White balance: adjustment value Horizontal position adjustment value Vertical position adjustment value Clock phase adjustment value Dot clock adjustment value Projection method status On-screen menu language Wide mode status Daylight View status Picture mode status Off uto On Natural Standard Dynamic lackboard Freeze status Lamp run time Shutter function status Keystone correction status Color temperature adjustment status 0 0 0 <power condition> <lamp condition> <input signal> <off_on> <+00000> <+0000> <+00002> <NT> <STD> <DYN> <D> <off_on> <acctch> <off_on> <color temp> 6 s of March 2009 < 8 >
Parameter format Parameter format Size (yte) Definition <off on> <input signal> <installation> <language> <power condition> <lamp condition> <acctch> <color temp> <date> <time> ( or 2 bytes also possible when under control) 4 8 6 Decimal without signs: 0 to 999 (000, 00, 002...999) Decimal with signs: -99 to +99 (-99...-0, +00, +0, +02...+99) Callback from the projector is yte. 0 = off, = on RG = computer, RG2 = computer 2, NWP = network, YUV = component, VID = video, SVD = S-Video 0 = front, = rear, 2 = ceiling and front, = ceiling and rear ENG = English, DEU = German, FR = French, ESP = Spanish, ITL = Italian, JPN = Japanese, CHI = Chinese, POR = Portuguese, SVE = Swedish, NOR = Norwegian, DN = Danish, POL = Polish, CES = Czech, MG = Hungarian, RUS = Russian, TH = Thai, KOR = Korean 000 = power off (standby mode off), 00 = power on (standby mode on) 0 = standby, = lamp on under control, 2 = lamp off, = lamp off under control Decimal without signs: 0000-9999 hours 0 = economy, = normal, 2 = high yy2yy4mm2dd2w = year (y) month (m) day (d) day of week (w) Day of week: Monday =, Tuesday = 2,... Sunday = 7 hh2mm2ss2 = hour (h) minute (m) second (s) NOTE: If a wrong command is received, the projector will send an ER40 command to the computer. Command example To set the volume to +0, send the command as shown below. STX VL : 0 ETX Start Command Parameter End NOTE: When sending commands without parameters, a colon (:) is not necessary. s of March 2009 < 9 >
Notes on Projector Placement and Operation: The projector uses a high-wattage lamp that becomes very hot during operation. Please observe the following precautions.. Never place objects on top of the projector while it is operating. 2. Make sure there is an unobstructed space of 50 mm (5-29/2 ) or more around the projector s exhaust openings.. If the projector is placed in a box or enclosure, ensure the temperature of the air surrounding the projector is between 0 C/2 F and 5 C/95 F. lso make sure the projector s intake and exhaust openings are not blocked. Take particular care to ensure that hot air from the exhaust openings is not sucked into the intake openings. 200 mm (7-7/8 ) or more 500 mm (7-5/8 ) or more 500 mm (7-5/8 ) or more Direction of ir Intake and Exhaust Intake Exhaust Operating the Projector Continuously. If the projector is to be operated continuously 0 hours or more, lamp replacement cycle duration becomes shorter. 2. The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods (one hour or less). Weights and dimensions shown are approximate. Specifications are subject to change without notice. This product may be subject to export control regulations. Intel and Pentium are registered trademarks of Intel Corporation. Microsoft, Windows Vista and Windows are either registered trademarks or trademarks of Microsoft Corp. in the United States and/or other countries. pple, Mac, Mac OS, Macintosh and Safari are trademarks of pple Inc., registered in the U.S. and other countries. ll other trademarks are the property of their respective trademark owners. Projection images simulated. s of March 2009 < 0 >