Revision 1.0 Parts List Mega

Similar documents
Revision 1.0 Parts List Mega

Revision 2.0 Parts List Minor

Revision 2.0 Parts List Minette 1~, 3~

Revision 3.0 Parts List Salvador 1~, 3~

Revision 3.0 Parts List Minex 1~ Minex Lite, Minex 3~

Revision 1.0 Parts List Salvador 1~, 3~

Parts List _2.1. Flygt /.190

Revision 1.0 Parts List Mini

Parts List _2.1. Flygt /.890

Revision 1.0 Parts List Minor

Flygt Handleiding voor installatie, bediening en onderhoud

Flygt /190. Parts List

Flygt D 8050, 50 Hz. Technical specification

PARTS LIST FOR CM-1250-A/C 1.5 HP

Data sheet: Wilo-Drain TP 65 E 114/11 (1~230 V)

Phone Horizontal Multistage Pumps Horizontal Stainless Steel Multistage Pumps 3, 6, 9 m³/h

Data sheet: Wilo-Drain TP 50 E 101/5,5 (1~230 V)

CM MTC PARTS LIST

3M Distribution Box (DDB)

Pendant Light Fitting IEC Series 6470/2

AristoMig U320w 208/230/400/460/475/500 V 3~ 50/60 Hz With cooling unit and central connection

EXPlora. Introduction

Series description: Wilo-Drain VC

Installation Manual IPT Installation of skillet systems with 125 A track current. MV a-E.

Dewatering. Series description Wilo-Drain STS 65. Submersible sewage pump

1.2 EUREKA Series... from page c.14

TYPE ASR 650 / 850 FLAT LIST 1/3

Okta 600, Roots pump, 230/400 V, 50 Hz; 265/460 V, 60 Hz

Immersion Pumps HCT (High Chem) sealless EN

Gear Pump Units For single-line centralized lubrication systems

82540/ /2-way diaphragm valves

Up to 85% higher Service Life due to efficient sealing method.

FOSC 450 C6 and D6 Closures

INSTRUCTION MANUAL AND PARTS LIST

Stationary Lifts Slings Spare Parts Accessories Spare Parts Tools

Bimetal Temperature Switch

Okta 1000, Roots pump without motor

CM MVC & CM MHC PARTS LIST

Medium Box for Cable Termination

Inductive sensor NI3-EG08K-Y1-H1341

FIST-MB2-S. FIST Medium Box for Cable Splicing Only. 4 Cable installation. 1 Introduction. Contents. 2 General. 5. Fiber routing to individual trays

2100/2200/4100/6200 & MPB Series Bottom Mount Drive Pack. for Standard Load Parallel Shaft 60 Hz Gearmotors

Immersion Pumps HCT (High Chem) sealless

SPARE PARTS OVERVIEW.

Collator series 300/400, 310B Spare parts list

7 Lighting Technology

Single sensor setup with NIVEL210

Fiber Optic Splice Closure GPJ Instruction Manual

Ex td A21 IP66 T58 C. max. 3 x 4 mm 2 or 1 x 10 mm 2 with pin cable lug + 1 x 2.5 mm 2 fine wire. max. 4 x M20 metal thread

2178-L/S Series Fiber Optic Splice Case with Gasket

Series description: Wilo-Jet HWJ

BFT Bollards. A complete range of bollards

LMP 305. Slimline Probe. Stainless Steel Sensor. accuracy according to IEC 60770: standard: 0.35 % FSO option: 0.25 % FSO.

EXEL. Ex de. - Double locking system operated by hexagonal-head tool - Double channel electronic ballast - Zones 1, 2, 21, 22. G13 bi-pin lamp holder

Operation and Maintenance Guide Electric Needle Scalers

DMP 335. Industrial Pressure Transmitter. Welded, Dry Stainless Steel Sensor. accuracy according to IEC 60770: 0.5 % FSO.

Admiss. counterpressure

Portable Filter Cart Type SPFC


2100, 2200, 4100, 6200, MPB Series Side Mount Drive Package for Light Load 60 Hz Gearmotors

SOGEVAC. Rotary Vane Vacuum Pumps single-stage, oil-sealed, m 3 x h -1 ( cfm)

R87B. Box Fan. Comprehensive Lineup of Single, Double, and Triple Axial Fans with Easy One-step Mounting. Model Number Structure. Ordering Information

03-Durchfuehren_RZ_0708_EN.qxd:03-Durchfuehren GB.qxd :06 Uhr Seite 200 Feed-through

Pendant Light Fittings Series 6050

SOGEVAC. Rotary Vane Vacuum Pumps single-stage, oil-sealed, m 3 x h -1 ( cfm) Central Vacuum Supply Systems

Guide for installers. METTLER TOLEDO MultiRange System solution analog Ex1. Hazardous area. Safe area

Inductive sensor BI1.5-EG08K-Y1

DMP 335 DMP 335. Industrial Pressure Transmitter. Welded, Dry Stainless Steel Sensor. Pressure Transmitter. Industrial

FOSC-600 C and D I N S T A L L A T I O N I N S T R U C T I O N

Installation and Operating Instructions Electric Vibrators HV/VFL/HF Series

ENCODER. Incremental Angle Transducer. Series A36, A58. Key-Features:

Type D mechanical diaphragm

DMP 331 DMP 331. Industrial Pressure Transmitter. for Low Pressure. Stainless Steel Sensor. Pressure Transmitter. Industrial. tri-matic.

C 303-RF Tri-element Array Microphone Instructions

Inductive sensor NI10-M18-Y1X-H1141

I Ex-protected connectors exlink I

PDP Series. Positive displacement dosing pump. Sandwich hydraulic diaphragm type with an internal relief-refilling valve SDI. The right dosing choice

Inductive sensor. 2-wire, analog output BI8-M18-LI-EXI

DMP 339. Pressure Transmitter. with G ¼" flush diaphragm. Pressure Transmitter. Industrial. accuracy according to IEC 60770: 0.

M-8460Se Printer Standard Unit

3M Fiber Optic Splice Closure 2178-XSB/XSB-FR & 2178-XLB/XLB-FR 3M Cable Addition Kit 2181-XB/XB-FR

2179-CD Series Fiber Optic Splice Closure. Installation Instructions

Briggs&Stratton 44Q B1

Single Point Flow Monitor SW118 SW119

Inductive sensor With analog output BI15-M30-LI-EXI

3 Cleaning. 4 Technical data

Fiber Optic Splice Closure GPJ Instruction Manual. [Escribir texto]

- special pressure ranges - variety of electrical and mechanical. Characteristics. - other versions on request

Mechanical flow switch for On/Off control

OWNER'S MANUAL SIGNAL COMMANDER

Oxymax W COS71. Technical Information. Potentiostatic amperometric three-electrode sensor Long-term stable sensor for trace measurement

High Head Close-Coupled Centrifugal Pumps

R87B. Box Fan. Comprehensive Lineup of Single, Double, and Triple Axial Fans with Easy One-step Mounting. Ordering Information. Model Number Structure

Typical Roll Shutter Hood* Assembly

Gear Pump Units. For single-line lubrication systems

ENCODER. Incremental Angle Transducer. Series A36, A58. Key-Features:

Cable ISOBUS Active Termination

Touch Panel Display Module

Circulating Feed Delivery System Installation Instructions for Model 55, 75, 90, & HMC FLEX-AUGER Feed Delivery Systems

DDF-SE. Application example. Feed-through Stationary Rotary Feed-through. Max. speed 500 revs/ min. Air feed-through Up to 6x

Transcription:

Revision.0 www.grindex.com Parts List 824.390 Mega

Table of Contents Table of Contents Introduction... 2. Specially approved products... 2 2 Product Description...3 2. Products included... 3 2.2 The data plate... 3 3 Exploded View...4 3. Drive unit...4 3.2 Support bearing, labels and mechanical seals...5 3.3 Connection housing and cable entry...6 3.4 N... 7 3.5 H... 8 3.6 Stand... 9 4 Spare Parts... 0 4. List of parts... 0 824.390 Mega Parts List

Introduction Introduction Purpose of this manual The purpose of this manual is to provide necessary information on spare parts and accessories order. Disclaimer Always use genuine Grindex parts. The use of other spare parts or accessories can invalidate any claims for warranty or compensation. Grindex does not take any responsibility for damages that are caused by the use of non-original parts. For more information, contact your local sales and service representative. Data for ordering spare parts The following information is needed for spare part orders: Serial number of the product Part number Quantity of bulk material, see * in tables. Specially approved products Qualification of personnel Only Grindex or Grindex-authorized service personnel may undertake repair work on Ex-approved products. Dimensional accuracy inspection Spare parts marked with (Ex) after the part number are subject to dimensional accuracy inspection when used in specially approved products. 2 824.390 Mega Parts List

2 Product Description 2 Product Description 2. Products included Pump model Standard EX MSHA Drainage Sludge Mega INOX 824.390 2.2 The data plate Introduction X The data plate is a metal label located on the main body of the pump. The data plate lists key product specifications. X 824.390 Mega Parts List 3

3 Exploded View 3 Exploded View 3. Drive unit 00 55 27 99 93 57 5 92 59 53 37 2 5 90 58 5 6 5 63 24 52 28 50 25 73 38 52 64 903 7 40 90 95 33 54 20 60 49 55 42 29 2088B 4 824.390 Mega Parts List

3 Exploded View 3.2 Support bearing, labels and mechanical seals 2 22 70 68 23 67 24 65 902 27 69 66 04 7 5 25 4 8 32 26 93 74 05 06 07 00 08 09 0 6 9 45 62 0 20263A 824.390 Mega Parts List 5

3 Exploded View 3.3 Connection housing and cable entry 202 39 2 20 3 53 3 78 34 26 20 9 54 5 48 3 58 94 72 79 44 34 77 8 76 02 46 95 96 75 47 4 85 20264B 6 824.390 Mega Parts List

3 Exploded View 3.4 N 43 33 60 6 56 44 83 9 48 3 56 36 30 82 6 22 49 32 20265A 824.390 Mega Parts List 7

3 Exploded View 3.5 H 28 56 29 2 35 40 48 37 42 7 8 3 4 35 62 9 9 30 4 87 47 88 59 3 36 43 39 4 56 38 46 84 20266A 8 824.390 Mega Parts List

3 Exploded View 3.6 Stand 80 82 8 83 84 2095B 824.390 Mega Parts List 9

4 Spare Parts 4 Spare Parts 4. List of parts Pos. No Part. No Denomination 40 93 Parallel key 2X8X63-A4 2 2 40 95 Hexagon head screw M0X20-A4-70 3 40 96 Hexagon head screw M0X55-A2-70 4 40 726 Hex.socket hd screw M2X40-A4-70 4 40 726 Hex.socket hd screw M2X40-A4-70 5 4 035 Hexagon head screw M2X30-A4-70 6 40 07 Hexagon head screw M2X45-A4-70 7 40 98 Hexagon head screw M2X70-A2-70 8 4 036 Hexagon head screw M2X90-A4-70 9 40 200 Hexagon head screw M6X50-A4-70 No of cable entries: 2 No of cable entries: 2 4 0 50 888 00 Plate-blank 50 020 20 Hexagon head screw M6X2-A4-70 3 50 02 00 Hex.socket hd screw M8X25-A2-70 4 4 037 Hex.socket hd screw M0X70-A4-70 5 5 29 00 Inspection screw A4 2 6 40 445 Drive screw 4X8 A4 2 7 4 038 Hexagon head screw M0X55-A4-70 8 4 035 Hexagon head screw M2X30-A4-70 9 4 035 Hexagon head screw M2X30-A4-70 2 40 267 Stud 0X60-A2-70 3 22 40 268 Stud 2X80-A4-70 2 24 32 260 Hexagon head screw M2X45-A2-70 25 40 207 Round nut M70X2 26 50 022 22 Hexagon nut M0-A4-70 6 Qty/Version 390 4 6 6 4 2 2 2 6 6 6 6 3 0 824.390 Mega Parts List

4 Spare Parts Pos. No Part. No Denomination 27 40 992 Hexagon head screw M2X60-A4-70 28 32 260 Hexagon head screw M2X45-A2-70 29 4 040 Hexagon head screw M2X70-A4-70 30 50 022 26 Plain washer 0-A4-70HV 6 32 40 20 Plain washer 2-A4-70HV 6 33 40 20 Plain washer 2-A4-70HV 3 35 40 544 Lock washer 6 37 40 487 O-ring 9.2X3 FPM 2 38 40 229 Lock washer 40 40 25 Seal ring FPM 4 4 040 Hexagon head screw M2X70-A4-70 42 5 29 00 Inspection screw A4 2 43 40 0 Hexagon nut M2-A4-70 3 44 40 0 Hexagon nut M2-A4-70 24 46 40 0 Hexagon nut M2-A4-70 2 47 40 0 Hexagon nut M2-A4-70 22 48 40 605 O-ring 269.3X5.7 FPM 49 40 507 O-ring 279.3X5.7 FPM 2 50 40 997 O-ring 49.3X5.7 FPM 5 40 998 O-ring 499.3X5.7 FPM 52 32 274 Plain washer 2-A2-70 4 53 5 675 0 Connection plate 54 40 20 Plain washer 2-A4-70HV 6 56 40 947 Lifting eye bolt M30 A4 2 57 40 20 Plain washer 2-A4-70HV 6 58 40 252 Seal washer 2 59 40 234 Protective plug 2 60 40 234 Protective plug 4 6 40 235 Protective plug 2 62 4 04 Plug A4 63 32 274 Plain washer 2-A2-70 2 64 40 250 Ball bearing 2 72 5 20 00 Terminal board unit 72, 40 208 Hexagon nut 2 72,2 40 2 Plain washer 0.5X28X2 2 72,3 40 245 Cable washer 2 Qty/Version 390 2 9 22 2 824.390 Mega Parts List

4 Spare Parts Pos. No Part. No Denomination 72,4 40 247 Closing link 3 72,5 40 248 Connection term boar 73 5 255 00 Temperature sensor 74 5 264 0 Lock washer 75 5 472 02 Entrance flange No of cable entries: 75 5 472 02 Entrance flange No of cable entries: 2 2 76 40 220 Plain washer 46.5X70X2- A2-70 76 4 039 Plain washer 54,5X70X2- A4-70 76 40 702 Plain washer 46,5X70X2- A4-70 76 40 223 Plain washer 54.5X70X2- A2-70 Qty/Version 390 Cable (32)-35mm 4 8 Cable (35)-38mm Cable (38)-4mm Cable (4)-44mm Cable (32)-35mm 8 Power cable x SUBCAB 3x50+2G35/2+S(2x0,5) 37,50-35mm Test cable 380V or greater Max 000V 77 40 590 Seal sleeve Cable (32)-35mm 2 4 77 40 593 Seal sleeve Cable (4)-44mm 2 4 77 40 59 Seal sleeve Cable (35)-38mm 2 4 77 40 592 Seal sleeve Cable (38)-4mm 2 4 78 5 200 00 El-lead through 6X + 4X 6-leads 50 Hz 2-poles 500V-550V D P2=85kW 6-leads 60 Hz 2-poles 575V-600V D P2=95kW/ 27hp 6-leads 60 Hz 2-poles 380V D P2=95kW/27hp 6-leads 50 Hz 2-poles 380V-400V D 660V-690V Y P2=85kW 6-leads 60 Hz 2-poles 440V-460V D P2=95kW/ 27hp 6-leads 50 Hz 2-poles 400V-440V D P2=85kW 6-leads 60 Hz 2-poles 480V D P2=95kW/27hp 6-leads 60 Hz 2-poles 575V D P2=95kW/27hp 6-leads 50 Hz 2-poles 400V D P2=85kW 6-leads 60 Hz 2-poles 400V D P2=95kW/27hp 6-leads 50 Hz 2-poles 525V-550V D 000V Y P2=85kW 4 8 4 2 824.390 Mega Parts List

4 Spare Parts Pos. No Part. No Denomination 78 5 250 00 El-lead through 9X + 4X 9-leads 50 Hz 2-poles 500V Y// 000V YSER P2=85kW 79 5 488 0 Ring Cable entry 2 8 5 249 00 Plate 70 MM 82 40 20 Plain washer 2-A4-70HV 6 83 40 20 Plain washer 2-A4-70HV 2 84 40 20 Plain washer 2-A4-70HV 2 85 40 855 Motor cable subcab 4G35+S(2X0,5) 85 40 856 Motor cable subcab 3X50+2G35/2+S(2X0,5) 85 40 857 Motor cable subcab 3X70+2G35/2+S(2X0.5) 85 40 355 Motor cable AWG/3-2-- GC 85 40 854 Motor cable subcab 4G25+S(2X0,5) 85 40 865 Motor cable subcab S3X35+3X6/3+S(4X0,5) 85 40 866 Motor cable subcab S3X50+3X25/3+S(4X0.5) 85 40 867 Motor cable subcab S3X70+3X35/3+2S(2X0.5) 35-37mm * 35-37mm * 38-4mm * SUBCAB 40,70-42,70mm * 32-34mm * 32-34mm * 38-40mm * 42-44mm * 87 40 20 Plain washer 2-A4-70HV 24 88 40 20 Plain washer 2-A4-70HV 22 90 5 937 09 Shaft unit A4 92 40 997 O-ring 49.3X5.7 FPM 93 50 020 20 Hexagon head screw M6X2-A4-70 95 5 262 00 Stator 42-26-2f 6-leads 60 Hz 2-poles 380V D P2=95kW/27hp 95 5 262 0 Stator 42-26-2f 2-leads 60 Hz 2-poles 460V DSER 380V Y// P2=95kW/27hp 95 5 262 0 Stator 42-26-2f 6-leads 50 Hz 2-poles 380V-400V D 660V-690V Y P2=85kW 6-leads 60 Hz 2-poles 440V-460V D P2=95kW/ 27hp 95 5 262 02 Stator 42-26-2f 6-leads 50 Hz 2-poles 400V D P2=85kW 6-leads 60 Hz 2-poles 400V D P2=95kW/27hp Qty/Version 390 824.390 Mega Parts List 3

4 Spare Parts Pos. No Part. No Denomination 95 5 262 03 Stator 42-26-2f 6-leads 50 Hz 2-poles 400V-440V D P2=85kW 6-leads 60 Hz 2-poles 480V D P2=95kW/27hp 95 5 262 04 Stator 42-26-2f 6-leads 60 Hz 2-poles 575V D P2=95kW/27hp 95 5 262 05 Stator 42-26-2f 6-leads 50 Hz 2-poles 500V-550V D P2=85kW 6-leads 60 Hz 2-poles 575V-600V D P2=95kW/ 27hp 95 5 262 06 Stator 42-26-2f 6-leads 50 Hz 2-poles 525V-550V D 000V Y P2=85kW 95 5 262 07 Stator 42-26-2f 9-leads 50 Hz 2-poles 500V Y// 000V YSER P2=85kW 99 40 20 Plain washer 2-A4-70HV 2 00 5 232 0 Mechanical seal WCCR/ WCCR 00 5 232 02 Mechanical seal RSIC/RSIC 02 40 572 O-ring 69.5X3 FPM Cable entry 2 04 40 937 Plug 2 05 5 263 0 Plain washer A4 06 5 245 02 Protective casing NBR-A4 09 - Wear protect.compl. FPM- A4 0 40 89 Parallel pin CP- H8-4X0-650 40 937 Plug Stand Stator housing 2 40 939 Protective plug M20 6 3 40 939 Protective plug M20 H Drilled acc. to: EN 092-2 tab. 3 40 940 Protective plug M20 H Drilled acc. to: ASME B 6.5-996;tab. 4 40 942 Protective plug M33 6 5 50 395 03 Mechanical seal 9 5 833 00 Spring ring, solid 20 40 96 Terminal block 4 2 40 92 Tension pin 22 5 223 00 Washer 23 50 368 00 Compression spring 2 24 5 222 00 Flange compl. 25 5 227 00 Flange Qty/Version 390 2 8 8 4 824.390 Mega Parts List

4 Spare Parts Pos. No Part. No Denomination 26 50 020 20 Hexagon head screw M6X2-A4-70 27 5 224 00 Impeller unit 28 40 20 Plain washer 2-A4-70HV 22 29 40 487 O-ring 9.2X3 FPM 2 30 5 20 00 Pump housing A4 N DN 50 Strainer Hydraulic end: stainless steel 30 5 20 0 Pump housing A4 N DN 50 Strainer Hydraulic end: stainless steel Drilled acc. to: EN 092-2 tab. 9 ASME B 6.5-996;tab.8 3 5 934 08 Impeller N 50Hz Stainless steel Curve code: 25 3 5 934 09 Impeller N 60Hz Stainless steel Curve code: 252 3 5 933 02 Impeller H 50Hz Stainless steel Curve code: 263 3 5 933 Impeller H 60Hz Stainless steel Curve code: 264 32 5 226 00 Suction cover uncoat A4 2 33 50 22 07 End sleeve 25 MM2; L=5 MM 6-leads 50 Hz 2-poles 500V-550V D P2=85kW 6-leads 60 Hz 2-poles 575V-600V D P2=95kW/ 27hp 6-leads 60 Hz 2-poles 380V D P2=95kW/27hp 2-leads 60 Hz 2-poles 460V DSER 380V Y// P2=95kW/27hp 6-leads 50 Hz 2-poles 380V-400V D 660V-690V Y P2=85kW 6-leads 60 Hz 2-poles 440V-460V D P2=95kW/ 27hp 6-leads 50 Hz 2-poles 400V-440V D P2=85kW 6-leads 60 Hz 2-poles 480V D P2=95kW/27hp 6-leads 60 Hz 2-poles 575V D P2=95kW/27hp 6-leads 50 Hz 2-poles 400V D P2=85kW 6-leads 60 Hz 2-poles 400V D P2=95kW/27hp Qty/Version 390 6 2 2 6 2 824.390 Mega Parts List 5

4 Spare Parts Pos. No Part. No Denomination 33 50 22 06 End sleeve 6 MM2; L=2 MM 34 5 438 00 Plate SENSOR CONNECTED T-T2 9-leads 50 Hz 2-poles 500V Y// 000V YSER P2=85kW 6-leads 50 Hz 2-poles 525V-550V D 000V Y P2=85kW 35 5 243 06 Diffuser coat. NBR-A4 H Drilled acc. to: EN 092-2 tab. 35 5 243 07 Diffuser coat. NBR-A4 H Drilled acc. to: ASME B 6.5-996;tab. 36 50 74 05 Adjusting washer 0.5 MM A4 36 50 74 05 Adjusting washer 0.5 MM A4 36 50 74 06 Adjusting washer 0.3 MM A4 37 50 74 05 Adjusting washer 0.5 MM A4 37 50 74 06 Adjusting washer 0.3 MM A4 38 5 220 03 Diffuser coat. NBR-A4 39 5 738 02 Diffuser coat. NBR-A4 40 5 246 02 Diffuser disc coated NBR-A4 4 5 247 02 Diffuser disc coated NBR-A4 42 5 242 07 Wear ring NBR-A4 43 5 22 02 Wear ring NBR-A4 44 4 026 Cap 0X20 PVC 2 44 40 875 Cap 6X6 PVC 44 4 043 Cap 8X6 PVC 2 44 4 044 Cap X25 PVC 44 40 876 Cap 7X6 PVC 46 4 05 Cap 35X45 PVC 2 46 4 027 Cap 38X45 PVC 46 4 028 Cap 42X45 PVC 2 46 4 008 Cap 32X45 PVC 2 47 40 943 Cable lug 48 5 939 00 Plain washer A4 49 5 932 00 Stator housing A4 cable entries: 49 5 932 0 Stator housing A4 cable entries: 2 5 5 935 04 Cover A4 52 5 26 00 Bearing housing low. 53 5 273 0 Oil housing A4 Qty/Version 390 6 9 2 2 5 3 2 2 6 824.390 Mega Parts List

4 Spare Parts Pos. No Part. No Denomination 54 5 27 00 Bearing cover 55 5 28 02 Diffuser coat. NBR-A4 56 5 230 00 Sleeve A4 58 5 274 02 Strainer A4 59 5 275 02 Strainer A4 60 5 2 02 Strainer A4 6 40 269 Stud 2X40-A4-70 3 62 50 898 00 Marking tape 65 40 225 Roller bearing 66 - Retaining ring SGA 48 67 30 995 Retaining ring SGH 0 68 40 23 Retaining ring SGH 5 69 50 037 22 O-ring 59.3X5.7 FPM 70 5 253 00 Washer 7 5 93 00 Bearing holder A4 80 4 030 Hexagon head screw M2X25-A4-70 8 4 03 Hexagon head screw M6X35-A4-70 82 40 20 Plain washer 2-A4-70HV 83 40 88 Plain washer 6-A4-A-70 4 84 5 936 02 Stand compl. A4 93 40 937 Plug 3 94 5 96 00 Sleeve 2 95 5 490 00 Gland screw 95 5 490 00 Gland screw 2 95 850 289 Mounting instruction 95 4 029 Hose coupling 96 4 032 Metal hose * 20 4 007 Cable lug D0, 35 MM2 2 20 4 033 Cable lug D0, 6MM2 2 20 4 042 Cable lug D0, 25MM2 2 800 5 92 04 O-ring kit FPM 800,37 40 487 O-ring 9.2X3 FPM 2 800,45 40 243 O-ring 800,48 40 605 O-ring 269.3X5.7 FPM 800,49 40 507 O-ring 279.3X5.7 FPM 2 800,50 40 997 O-ring 49.3X5.7 FPM 800,5 40 998 O-ring 499.3X5.7 FPM Qty/Version 390 4 824.390 Mega Parts List 7

4 Spare Parts Pos. No Part. No Denomination 800,69 40 999 O-ring 229.3X5.7 FPM 800,92 40 997 O-ring 49.3X5.7 FPM 800,02 40 243 O-ring 800,02 40 572 O-ring 69.5X3 FPM 2 800,29 40 487 O-ring 9.2X3 FPM 2 800,69 4 000 O-ring 34.3X5.7 FPM 800,69 50 037 22 O-ring 59.3X5.7 FPM 800,950 850 022 Mounting instruction 900 5 940 02 Basic repair kit FPM, WCCR- WCCR 900 5 940 06 Basic repair kit FPM, WCCR- RSIC 90 40 053 Oil ISO VG 32 * 902 4 034 Grease * 903 4 034 Grease * Qty/Version 390 8 824.390 Mega Parts List

www.grindex.com Grindex Gesällvägen 33 74 07 Sundbyberg Sweden Tel: +46-8-606 66 00 Fax: +46-8-745 53 28 www.grindex.com Visit our Web site for the latest version of this document and more information The original instruction is in English. All non-english instructions are translations of the original instruction. 206 Grindex 886440_.0_en-US_206-06_GPL824.390