3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 AYCL253PHWH 1P 3WY 120V DMR Lutron Catalog Number Manufacturer Description Weight per unit Product Category Features actuator connection load Material Poles 3 Voltage Rating 120 Wattage 600 Material, Color, and Finish Color AYCL253PHWH Lutron Ariadni For 250W CFL/Led, 600W Inc/Hal, or Lutron Hi-Lume A-Series Lte Led Driver, Clamshell Packaging In White 0.3000 (lbs/each) Lighting s Toggle Switch Screw Terminals Incandescent, Halogen, CFL,LED, Lutron Hi-Lume A-Series LTE LED Driver Plastic/Metal LIGHT ALMOND Dimensions and Weight Depth.31 in (8 mm) Length 2.6 in (66 mm) Size 4.6in (117mm) x 2.86in (73mm) Width 1.3
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 Descriptions Description Long Description Product Type special features Manufacturer Information Brand Lutron GTIN 00784276090162 Manufacturers Part Number AYCL253PHWH sub brand Pico Wireless UPC 784276090162 1P 3WY 120V DMR Ariadni dimmer for 250W CFL/LED, 600W inc/hal, or Lutron Hi-Lume A-Series LTE LED Driver, clamshell packaging in white Ariadni CFL/Led 250W White, Clam PKG Uses Lutron patent pending HED Microprocessor technology. SSL-7A compliant. Taxonomies, Classifications, and Categories Category Description Residential dimmers, motion sensors, controls, & photo cells Type Wireless remote control Packaging Carton 1 Package 3 Weight Per each 0.3 Uses, Certifications, and Standards Application LIGHTING CONTROL Enclosure Plastic environmental conditions Indoor use only Frequency Rating 60 Mounting WALLBOX Operating Temperature 0-40 C standard UL1472 CSA C22.2 184.1, NEMA SSL-7A Type 2
250 W C L Ariadni 250 W C L for CFL, LED, Halogen, and Incandescent dimmable bulbs. Features On / off toggle switch with a captive linear-slide dimmer for a traditional wallplate opening HEDT Technology: Advanced LutronR dimming circuitry designed for compatibility with most high efficacy light bulbs ULR Listed to control: Dimmable compact fluorescent load (CFL) with integrated ballast Dimmable LED with integrated driver Lutron Hi-lumeR A-Series LTE LED Driver Halogen Incandescent Low-end adjustment to accommodate a wide range of bulbs 100% factory tested NEMA SSL-7A Type 2 Compliant 369809a 1 04.08.14 Switch on (to selected preset light level), and off Select light level with slider Application Requirements When dimming CFLs or LEDs, only bulbs marked or rated as DIMMABLE may be used. For a list of compatible DIMMABLE CFLs and LEDs please visit www.lutron.com/dimcflled. For questions call 1.800.523.9466. Some DIMMABLE CFLs and LEDs require a minimum number of bulbs for proper operation. For details and a list of bulbs, please visit www.lutron.com/dimcflled. Wallplate sold separately Model Numbers AYCL-253P-XX 1 Single pole / 3-way 2 1 XX in the model number represents color/finish code; see "Colors and Finishes" chart on 3. 2 For 3-way and 4-way switching, use mechanical switches.
250 W C L Specifications Regulatory Approvals ULR Listed to US and Canadian safety requirements UL1472 / CSA C22.2 184.1 NEMA SSL-7A Type 2 369809a 2 04.08.14 Power and Ratings 60 Hz 250 W dimmable CFL/LED or 600 W Incandescent/Halogen or Mixed bulb type per Multigang and Mixed Bulb Type Ratings table 350W LutronR Hi-lumeR A series LTE LED Driver (maximum 8 drivers) Environment For indoor use only. Ambient operating temperature: 32 F to 104 F (0 C to 40 C), 0% - 90% humidity Performance Power failure memory: should power be interrupted, the control will return to its previously set level prior to the interruption when power is restored. Tested to withstand electrostatic discharge without damage or memory loss, in accordance with IEC 61000-4-2. Precise color matching Mechanical air-gap switch to disconnect load power Warranty 1 Year Limited Warranty For additional Warranty information, please visit http://www.lutron.com/technicaldocumentlibrary/ 369-119_Wallbox_Warranty.pdf
250 W C L Dimensions 0.23 in (5.8 mm) 369809a 3 04.08.14 4.60 in (117 mm) 2.58 in (66 mm) 2.86 in (73 mm) 1.18 in (30 mm) Colors and Finishes Gloss Finishes Add color/finish code to model # Example: AYCL-253P-WH WH IV AL LA BR BL White Ivory Almond Light Almond Brown Black
250 W C L Multigang and Mixed-Bulb-Type Ratings 369809a 4 04.08.14 When installing more than one in the same wallbox, it may be necessary to remove some side sections prior to wiring (see diagram). Removal of side sections may reduce maximum wattage, as shown in the chart below. Mixing bulb types (using a combination of CFL/LED, and Incandescent/Halogen bulbs) will also affect the maximum ratings, as shown in the chart below. Note: LutronR Hi-lumeR A-Series LTE LED loads cannot be mixed with other loads. EXAMPLE: If one set of side sections is removed and you have eight 9 W LED bulbs installed (Total LED Wattage = 72 W), you may add up to 300 W of incandescent or halogen lighting. Do not remove outside sections Each has inside sections removed Middle has two side sections removed A B B B C B Total CFL/LED Wattage Installed Maximum Allowable Incandescent/Halogen Wattage (Wattage per bulb x # of bulbs) A No sides removed B 1 side removed C 2 sides removed 0 W + 600 W 500 W 400 W 1 W 40 W + 500 W 400 W 300 W 41 W 80 W + 400 W 300 W 200 W 81 W 120 W + 300 W 200 W 100 W 121 W 160 W + 200 W 100 W 50 W 161 W 200 W + 100 W 50 W 0 W 201 W 250 W + 0 W 0 W 0 W Note: There is no wattage reduction when controlling only LED or CFL
Operation (View with wallplate removed) 250 W C L 369809a 5 04.08.14 Lever-type Adjustment Dial 1 1 Switch Turns lights ON and OFF. 2 Slider Controls light level. Up Increases light level 3 Adjustment lever Sets low end dimming limit. Right (clockwise) Increases brightness 2 3 Down Decreases light level IMPORTANT: Set slider to bottom before adjusting dimming range. Left (counter-clockwise) Decreases brightness
Wiring Diagrams Single-Pole Wiring 250 W C L 369809a 6 04.08.14 60 Hz Lighting 3-Way Wiring Line Side 3-Way OR 60 Hz Lighting Side 60 Hz 3-Way Lighting 4-Way Wiring Line Side 4-Way 3-Way Copper/Black screw terminal Brass/Gold screw terminal Green screw terminal 60 Hz Lighting Please refer to switch instruction sheet for proper wiring. Side 60 Hz 3-Way OR 4-Way Lighting Note for 4-Way Wiring: must be installed Line Side or Side. It cannot be installed in the 4-way location.