ELECTRIC SAWS The latest generation of electric saws consists of the DR, DS, DT, DU, DW machines and the new DX high performance models equipped with the latest technology. The most recent series offers a power range to suit all types of materials, tiles or building materials, as well as high precision miter cutting and other special angle cuts, in addition to accepting large formats, with heights of up to 9 (232 mm.) and cutting lengths of up to 51 (130 cm.). These models all incorporate thermal protective devices and overload cut off switches, and fully comply with most of current standards and directives, making RUBI electric saws the safest on the market. At the same time, RUBI also offers a large range of lighter portable cutters (models D and ND), for tiles and facings in general. These models are extremely easy to use and offer maximum safety guarantees, without any detriment to their range of features and high performance. The whole range of electrically operated machinery is fully approved by numerous organizations and comply with current CE, GS, CSA, and MEEI standards, offering the user full two years warranty in all RUBI international after-sales service centres.
Electric saws Diamant D D-200 The 100% rustproof machine Stop for repeated cuts. 100% rustproof. Foldable table for miter joints. 146 DIAMANT D DIAMANT D-200 1.2 HP-0.88 kw 1 8 230 V 50 Hz. 8413797459456 45945 230 V 50 Hz. UK 8413797459517 45951 230 V 50 Hz. CH 8413797459586 45958 230 V 50 Hz. AUSTR. 8413797459418 45941 220 V 60 Hz. 8413797459562 45956 120 V 50 Hz. UK 8413797459524 45952 For gres, ceramic, glass, tiles, marble and other materials. Diamond blade Ø 8 (200 mm.) included. With thermic security switch. Water refrigeration of the blade. Electric cable: 4.9 ft. (1,5 m.). With guide to allow repetitive cuts. Table, internal structure and chassis made entirely of stainless steel. Tip-up table for mitring up to 16 (42 cm.). Guide for 45º cuts (Ref. 45345). Guide for cuts from 0 to 90º (Ref. 45880). D-200 2875 1 1 /2 Ø 8 18 x 18 x 10 35.3 Lb. (35 mm.) (200 mm.) (47x46x 26 cm.) (16 kg.)
Electric saws Diamant ND Foldable table. ND-125 The lightest most powerful portable in the market. With carrying case. Lateral Stop. DIAMANT ND DIAMANT ND-125 0.8 HP-0.6 kw 2 *36 230 V 50/60 Hz. 8413797459906 45990 230 V 50/60 Hz. U.K. 8413797459951 45995 230 V 50/60 Hz. CH. 8413797459975 45997 220 V 50/60 Hz. USA. 8413797459920 45992 230 V 50/60 Hz. AUSTR 8413797459937 45993 DIAMANT ND-125 WITHOUT CASE 230 V 50/60 Hz. 8413797469905 46990 0.8 HP-0.6 kw 230 V 50/60 Hz. U.K. 8413797469950 46995 230 V 50/60 Hz. CH. 8413797469974 46997 220 V 50/60 Hz. USA. 8413797469929 46992 2 64 230 V 50/60 Hz. AUS. 8413797469936 46993 120 V 50/60 Hz. 8413797459913 45991 120 V 50/60 Hz. USA. 8413797459982 45998 110 V 50/60 Hz. U.K. 8413797459968 45996 230 V 50/60 Hz. DK. 8413797459999 45999 120 V 50/60 Hz. 8413797469912 46991 120 V 50/60 Hz. USA. 8413797469981 46998 110 V 50/60 Hz. U.K. 8413797469967 46996 230 V 50/60 Hz. DK. 8413797459998 46999 147 For gres, ceramic, glass, tiles, marble and other materials Ø 4 1/2 (115 mm.) or 5 (125 mm.) diamond blade. Ø 5 (125 mm.) diamond blade included. Water refrigeration of the blade. Electric cable: 4.9 ft. (1,5 m.). With guide to allow repetitive cuts. With carrying case. Direct drive. Pal Box Available. See page. 250. ND-125 4800 32/32 / 1 1 /4 4 1 /2-5 15 3 /4 x 11 x 5 8.82 Lb. (25 / 30 mm.) (115-125 mm.) (40 x 30 x 14 cm.) (4 kg.)
Electric saws Diamant ND ND-180-E ND The largest product range in the world. ND-180 148 DIAMANT ND DIAMANT ND-180-E 0.5 HP-0.37 kw 1 *16 230 V 50 Hz. 8413797459708 45970 230 V 50 Hz. UK 8413797459753 45975 230 V 50 Hz. CH 8413797459777 45977 230 V 50 Hz. AUSTR. 8413797459388 45938 220 V 60 Hz. 8413797459715 45971 120 V 50 Hz. UK 8413797459760 45976 120 V 60 Hz. USA 8413797459784 45978 DIAMANT ND-180 0.5 HP-0.37 kw 1 8 230 V 50 Hz. 8413797459005 45900 230 V 50 Hz. UK 8413797459050 45905 230 V 50 Hz. CH 8413797459074 45907 230 V 50 Hz. AUSTR. 8413797459371 45937 220 V 60 Hz. 8413797459012 45901 120 V 50 Hz. UK 8413797459067 45906 120 V 60 Hz. USA 8413797459081 45908 120 V 60 Hz. CSA 8413797459098 45909 For gres, ceramic, glass, tiles, marble and other materials. Diamond blade Ø 7 (180 mm.) included. With thermic security switch. Water refrigeration of the blade. Electric cable: 4.9 ft. (1,5 m.). Tip-up table for mitring up to 8 (20 cm.) ND-180-E and 18 (45 cm.) ND-180. With guide to allow repetitive cuts. Stainless steel work-table. Direct drive. Guide for 45º cuts (Ref. 45345). Guide for cuts from 0 to 90º (Ref. 45880). Tray (Ref. 45434) ND-180-E 2800 8 1 7 /6 Ø 7 19 x 15 3 /4 x 9 1 /16 28.7 Lb (20 cm.) (35 mm.) (180 mm.) (48 x 40 x 23) (13 kg) ND-180 2800 18 1 7 /6 Ø 7 19 x 17 x 9 1 /16 30.6 Lb (45 cm.) (35 mm.) (180 mm.) (48,5 x 43 x 23 ) (13,9 kg)
Electric saws Diamant ND ND-200 ND The largest product range in the world. ND-300 DIAMANT ND 149 DIAMANT ND-200 1.2 HP-0.88 kw 1 8 230 V 50 Hz. 8413797459104 45910 230 V 50 Hz. UK 8413797459159 45915 230 V 50 Hz. CH 8413797459173 45917 230 V 50 Hz. AUSTR. 8413797459395 45939 220 V 60 Hz. 8413797459111 45911 120 V 50 Hz. UK 8413797459166 45916 120 V 60 Hz. USA 8413797459180 45918 120 V 60 Hz. CSA 8413797459197 45919 DIAMANT ND-300 2 HP-1.5 kw 1 6 230 V 50 Hz. 8413797459203 45920 230 V 50 Hz. UK 8413797459258 45925 230 V 50 Hz. CH 8413797459272 45927 230 V 50 Hz. AUSTR. 8413797459401 45940 220 V 60 Hz. 8413797459210 45921 120 V 50 Hz. UK 8413797459265 45926 120 V 60 Hz. USA 8413797459289 45928 120 V 60 Hz. CSA 8413797459296 45929 For gres, ceramic, glass, tiles, marble and other materials. Ø 8 (200 mm.) diamond disc included in ND-200 Ø 12 (300 mm.) diamond disc not included in ND-300 With thermic security switch. Water refrigeration of the blade. Electric cable: 4.9 ft. (1,5 m.). Tip-up table for mitring up to 20 (50 cm.) for ND-200 and 24 (60 cm.) ND-300. With guide to allow repetitive cuts. Stainless steel work-table. Direct drive. Guide for 45º cuts (Ref. 45345). Guide for cuts from 0 to 90º (Ref. 45880). Tray (Ref. 45434). ND-200 2770 20 1 5 /8 Ø 8 21 3 /8 x 20 3 /4 x 9 33.1 Lb (50 cm.) (40 mm.) (200 mm.) (51 x 52,5 x 24 cm.) (15 kg) ND-300 2800 24 3 Ø 12 27 x 24 x 10 67.2 Lb (60 cm.) (75 mm.) (300 mm.) (69 x 63 x 26 cm.) (30,5 kg)
Electric saws Diamant DU and DU-L Foldable head for miter cutting. DU-200 / DU-200-L Gradable stop. Gradable square. 150 DIAMANT DU DIAMANT DU-200 1 HP-0.73 kw 1 4 230 V 50 Hz. 8413797559507 55950 230 V 50 Hz. UK 8413797559552 55955 230 V 50 Hz. CH 8413797559576 55957 230 V 50 Hz. AUSTR. 8413797559941 55994 220 V 60 Hz. 8413797559514 55951 120 V 50 Hz. 8413797559569 55956 120 V 60 Hz. USA 8413797559583 55958 110 V 50 Hz. UK 8413797559538 55953 DIAMANT DU-200-L 1 HP-0.73 kw 1 4 230 V 50 Hz. 8413797559705 55970 230 V 50 Hz. UK 8413797559750 55975 230 V 50 Hz. CH 8413797559774 55977 230 V 50 Hz. AUSTR. 8413797559965 55996 220 V 60 Hz. 8413797559712 55971 120 V 50 Hz. 8413797559767 55976 120 V 60 Hz. USA 8413797559781 55978 110 V 50 Hz. UK 8413797559736 55973 For gres, ceramic, glass, tiles, marble and other materials. Diamond blade Ø 8 (200 mm.) included. With thermic security switch. Water pump: refrigeration of blade (with flow control valve). Motor assembly mounted on fold-away sliding bearings for miter cuts. Electric cable: 4.9 ft. (1,5 m.). Reinforced chassis, structural rigidity. With guide to allow repetitive cuts and adjustable square. With table 22 x 14 (57 x 37 cm.). Direct drive. Support table (Ref. 50935). Roller table extension (Ref. 057940). DU-200 2750 18 13 x 13 2 Ø 8 33 x 15 x 12 57.3 Lb (45 cm.) (32x32 cm.) (48 mm.) (200 mm.) (85 x 40 x 32) (26 kg) DU-200-L 2750 25 18 x 18 2 Ø 8 41 x 15 x 12 66.1 Lb (65 cm.) (46x46 cm.) (48 mm.) (200 mm.) (105 x 40 x 32) (30 kg)
Electric saws Diamant DW and DW-L Foldable head for miter cutting. DW-200 / DW-200-L Gradable stop and square. Adjustable plunge cut. 151 DIAMANT DW DIAMANT DW-200 1 HP-0.73 kw 1 4 230 V 50 Hz. 8413797559606 55960 230 V 50 Hz. UK 8413797559651 55965 230 V 50 Hz. CH 8413797559675 55967 230 V 50 Hz. AUSTR. 8413797559972 55997 220 V 60 Hz. 8413797559613 55961 120 V 50 Hz. 8413797559668 55966 120 V 60 Hz. USA 8413797559682 55968 110 V 50 Hz. UK 8413797559637 55963 DIAMANT DW-200-L 1 HP-0.73 kw 1 4 230 V 50 Hz. 8413797559804 55980 230 V 50 Hz. UK 8413797559859 55985 230 V 50 Hz. CH 8413797559873 55987 230 V 50 Hz. AUSTR. 8413797559989 55998 220 V 60 Hz. 8413797559811 55981 120 V 50 Hz. 8413797559866 55986 120 V 60 Hz. USA 8413797559880 55988 110 V 50 Hz. UK 8413797559835 55983 For gres, ceramic, glass, tiles, marble and other materials. Diamond blade Ø 8 (200 mm.) included. With thermic security switch. Water pump: refrigeration of blade (with flow control valve). Electric cable: 4.9 ft. (1,5 m.). Motor assembly mounted on fold-away sliding bearings for miter cuts. Vertically adjustable mobile head with plunge cut effect. Reinforced chassis, structural rigidity. With guide to allow repetitive cuts and adjustable square. With table 22 x 14 (57 x 37 cm.) Direct drive. Support table (Ref. 50935). Roller table extension (Ref. 057940). DW-200 2750 18 -* 20 14 x 14 2 / 3 Ø 8 33 x 15 x 15 59.5 Lb (45-*50 cm.) (35x35 cm.) (48 / 75 mm.) (200 mm.) (85x40x40,6 cm.) (27 kg.) DW-200-L 2750 24 -* 28 19 x 19 2 / 3 Ø 8 41 x 15 x 15 68.3 Lb (63-*70 cm.) (50x50 cm.) (48 / 75 mm.) (200 mm.) (105x40x40,6 cm.) (31 kg.) * Using plunge cut effect.
Electric saws Diamant DW-LP DW-200-LP Foldable head for miter cutting. Gradable stop and square. Adjustable plunge cut. 152 DIAMANT DW DIAMANT DW-200-LP 1 HP-0.73 kw 230 V 50 Hz. 8413797559954 55995 1 4 230 V 50 Hz. UK 8413797549850 54985 230 V 50 Hz. CH 8413797549874 54987 230 V 50 Hz. AUSTR. 8413797559996 55999 220 V 60 Hz. 8413797549812 54981 220 V 60 Hz. USA 8413797549829 54982 120 V 60 Hz. 8413797549898 54989 120 V 60 Hz. USA 8413797549881 54988 120 V 50 Hz. 8413797549867 54986 110 V 50 Hz. UK 8413797549836 54983 100 V 60 Hz. J.P. 8413797549805 54980 100 V 50 Hz. J.P. 8413797549843 54984 For gres, ceramic, glass, tiles, marble and other materials. Diamond blade Ø 8 (200 mm.) included. With thermic security switch. Water pump: refrigeration of blade (with flow control valve). Motor assembly mounted on fold-away sliding bearings for miter cuts. Electric cable: 4.9 ft. (1,5 m.). Reinforced chassis, structural rigidity. Vertically adjustable mobile head with plunge cut. With guide to allow repetitive cuts and adjustable square. With table 22 x 14 (57 x 37 cm.) Direct drive. Roller table extension (Ref. 057940). * Using plunge cut effect. DW-200-LP 2750 24-*28 19 x 19 2 / 3 Ø 8 41 x 15 x 45 83.7 Lb (63-*70 cm.) (50x50 cm.) (48 / 75 mm.) (200 mm.) (105x40x116 cm.) (38 kg.)
Electric saws Diamant DW-N Detachable table. DW-200-N / 250-N System of foldable legs. Wheels to facilitate transport. DIAMANT DW-N DIAMANT DW-200-N 1.5 HP-1.1 kw 230 V 50 Hz. 220 V 60 Hz. 8413797549003 54900 8413797549010 54901 220 V 60 Hz. USA 8413797549027 54902 1 *2 110 V 50 Hz. UK 8413797549034 54903 100 V 60 Hz. JP 8413797549041 54904 230 V 50 Hz. UK 8413797549058 54905 120 V 50 Hz. 8413797549065 54906 DIAMANT DW-250-N 230 V 50 Hz. 8413797549409 54940 1.5 HP-1.1 kw 220 V 60 Hz. 8413797549416 54941 220 V 60 Hz. USA 8413797549423 54942 1 *2 110 V 50 Hz. UK 8413797549430 54943 100 V 60 Hz. JP 8413797549447 54944 230 V 50 Hz. UK 8413797549454 54945 120 V 50 Hz. 8413797549461 54946 For gres, ceramic, glass, tiles, marble and other materials. Ø 8 (200 mm.) diamond disc included in DW-200-N. Ø 10 (250mm.) diamond disc included in DW-250-N. With thermic security switch. Water pump refrigeration of blade (with flow control valve). Motor assembly mounted on fold-away sliding bearings for miter cuts. System of foldable legs. Includes wheels and a handle to ease the movement of the machine and its loading on to a vehicle. Detachable table to facilitate the cleaning of the machine. 230 V 50 Hz. CH 8413797549072 54907 120 V 60 Hz. USA 8413797549089 54908 120 V 60 Hz. 8413797549096 54909 100 V 50 Hz. JP 8413797549102 54910 230 V 50 Hz. AUS 8413797549164 54916 230 V 50 Hz. DK 8413797549195 54919 230 V 50 Hz. CH 8413797549478 54947 120 V 60 Hz. USA 8413797549485 54948 120 V 60 Hz. 8413797549492 54949 100 V 50 Hz. JP 8413797549508 54950 230 V 50 Hz. AUS 8413797549560 54956 230 V 50 Hz. DK 8413797549591 54959 New guide with an easily adjustable ruler. Electric cable: 4.9 ft. (1,5 m.) Reinforced chassis, structural rigidity. Vertically adjustable mobile head with plunge cut. Direct drive. Roller table extension (Ref. 57940) Cleaning block (Ref. 05973) Special slides for mitre cutting (Ref. 57991) 153 * Using plunge cut effect. DW-200-N 2875 28 -*29 21 x 21 1 5 /8 / 2 3 /16 Ø 8 45 x 18 x 45 101.4 Lb. (73-*75 cm.) (52x52 cm.) (32 / 55 mm.) (200 mm.) (116x48x116 cm.) (46 kg.) DW-250-N 2875 28 -*29 21 x 21 2 5 /8 / 3 1 /4 Ø 10 45 x 18 x 45 103.6 Lb. (73-*75 cm.) (52x52 cm.) (65 / 80 mm.) (250 mm.) (116x48x116 cm.) (47 kg.)
Electric saws Diamant DS-LPS DS-230-LPS Foldable head for miter cutting. Adjustable plunge cut. Stop for repeated cuts 154 DIAMANT DS-LPS DIAMANT DS-230-LPS 230 V 50 Hz. 8413797599008 59900 1.5 HP-1.1 kw 230 V 50 Hz. UK 8413797599015 59901 230 V 50 Hz. CH 8413797599107 59910 230 V 50 Hz. AUSTR. 8413797599183 59918 1 **1 220 V 60 Hz. 8413797599053 59905 220 V 60 Hz. USA 8413797599084 59908 120 V 60 Hz. 8413797599046 59904 120 V 60 Hz. USA 8413797599121 59912 120 V 50 Hz. 8413797599039 59903 120 V 50 Hz. UK 8413797599022 59902 For gres, ceramic, glass, tiles, marble and other materials. With thermic security switch. Water pump: refrigeration of blade (with flow control valve). Diamond blade Ø 9 (230 mm.) not included. Motor assembly mounted on sliding bearings, with vertically adjustable and foldable mobile head for miter cuts. Electric cable: 4.9 ft. (1,5 m.). With guide to allow repetitive cuts. With table 21 x 26 (55 x 68 cm.) Direct drive. For mitre cutting very tough materials, we recommend the use of the special slides (Ref.57991). Roller table extension (Ref. 057940). Special slides for mitre cutting (Ref. 57991). * Using plunge cut effect. DS-230-LPS 2875 *28 19 x19 2 /3 Ø 9 43 x21 x55 1/8 127.9 Lb 145.5 Lb (*71 cm.) (50x50 cm.) (50 / 90 mm.) (230 mm.) (110x55x140 cm.) (66 kg.) (74 kg.)
Electric saws Diamant DS-EP Foldable head for miter cutting. DS-250-EP Gradable stop and square. Adjustable plunge cut. DIAMANT DS-EP DIAMANT DS-250-EP 1.5 HP-1.1 kw 1 **1 230 V 50 Hz. 8413797599909 59990 230 V 50 Hz. U.K. 8413797599916 59991 120 V 60 Hz. USA 8413797599923 59992 220 V 60 Hz. 8413797599954 59995 120 V 50 Hz. U.K. 8413797599978 59997 220 V 60 Hz. USA 8413797599985 59998 155 For gres, ceramic, glass, tiles, marble and other materials. Diamond Blade Ø 10 included (250 mm.). With thermic security switch. Water pump: refrigeration of blade (with flow control valve). Motor assembly mounted on sliding bearings, with vertically adjustable and foldable mobile head for miter cuts. Electric cable: 4.9 ft. (1,5 m.). Reinforced chassis, structural rigidity. Vertically adjustable mobile head with plunge cut capability and foldable head for miter cuts. With guide to allow repetitive cuts. With table 21 x 26 (55 x 68 cm.). Direct drive. Direct drive. For mitre cutting very tough materials, we recommend the use of the special slides (Ref.57991). Roller table extension (Ref. 057940). Special slides for mitre cutting (Ref. 57991). * Using plunge cut effect. DS-250-EP 2875 *26 18 x 18 2 / 3 Ø 10 43 x 21 x 51 147.7 Lb 165.3 Lb (*65 cm.) (45x45 cm.) (70 / 92 mm.) (250 mm.) (110x55x130 cm.) (67 kg.) (75 kg.)
Electric saws Diamant DS and DS-L DS-250 / FC / L Ceramic fixing accessory. Reinforced bars. (Photo DS-250-L) Stop for repeated cuts. DIAMANT DS 156 DIAMANT DS-250 3 HP-2.2 kw Three-phase motor 4 HP-3 kw 1 **1 230 V 50 Hz. 8413797579703 57970 240 V 50 Hz. AUSTR. 8413797579857 57985 230 V 50 Hz. UK 8413797579710 57971 380 V 50 Hz. 8413797579765 57976 220 V 60 Hz. 8413797579758 57975 220 V 60 Hz. USA 8413797579789 57978 120 V 50 Hz. UK 8413797579727 57972 120 V 60 Hz. USA 8413797579772 57977 DIAMANT DS-250-FC ( With slab holder). 3 HP-2.2 kw Three-phase motor 4 HP-3 kw 1 **1 230 V 50 Hz. 8413797599206 59920 240 V 50 Hz. AUSTR. 8413797599350 59935 230 V 50 Hz. UK 8413797599213 59921 220 V 60 Hz. 8413797599251 59925 380 V 50 Hz. 8413797599268 59926 220 V 60 Hz. USA 8413797599282 59928 120 V 50 Hz. UK 8413797599220 59922 120 V 60 Hz. USA 8413797599275 59927 PRODUCT ONLY WITH SPECIAL ORDERS. INQUIRE FOR AVAILABILITY DIAMANT DS-250-L 3 HP-2.2 kw Three-phase motor 4 HP-3 kw 1 **1 230 V 50 Hz. 8413797589207 58920 230 V 50 Hz. UK 8413797589214 58921 220 V 60 Hz. 8413797589252 58925 380 V 50 Hz. 8413797589269 58926 220 V 60 Hz. USA 8413797589283 58928 120 V 50 Hz. UK 8413797589221 58922 120 V 60 Hz. USA 8413797589238 58923 240 V 50 Hz. AUSTR. 8413797589351 58935 For gres, ceramic, glass, tiles, marble and other materials. With thermic and overload security switches. Water pump refrigeration of blade (with flow control valve). Diamond blade Ø 10 (250 mm.) not included. Motor assembly mounted on sliding bearings, with vertically adjustable and foldable mobile head for miter cuts. With guide for repetitive cuts and fold-away accessory for repetitive miter cuts. Ceramic fixing accessory (included with DS-250-L and DS-250-FC) With large table 21 x 35 (59 x 90 cm.) in DS-250 and 33 x 51 (86 x 130 cm.) in DS-250-L. Adjustable accessories (see page 164) Roller table extension (Ref. 057940). Special miter joint decks (Ref. 57990). Ceramic fixing accessory for DS-250 (Ref. 57945). DS-250 2800 36 26x26 2 Ø 10 57 x 25 x48 248 Lb 280 Lb (92 cm.) (65x65 cm.) (50 mm.) (250 mm.) (145x64x123 cm.) (112,5 kg.) (127 kg.) DS-250-FC 2800 36 26x26 2 Ø 10 57 x25 x48 252.4 Lb 284.4 Lb (92 cm.) (65x65 cm.) (50 mm.) (250 mm.) (145x64x123 cm.) (114,5 kg.) (129 kg.) DS-250-L 2800 51 36x36 2 Ø 10 75 x33 x48 380.3 Lb 498.2 Lb (130 cm.) (92x92 cm.) (50 mm.) (250 mm.) (193x87x123 cm.) (172,5 kg.) (226 kg.)
Electric saws Diamant DS and DS-L DS-300 / FC / L Ceramic fixing accessory. Foldable head for miter cutting. Plunge cut micro-adjustment. (Photo DS-300-L) DIAMANT DS DIAMANT DS-300 3 HP-2.2 kw 2.6 HP-1.9 kw* Three-phase motor 4 HP-3 kw 1 **1 230 V 50 Hz. 8413797579208 57920 230 V 50 Hz. UK 8413797579215 57921 230 V 50 Hz. CH* 8413797579307 57930 220 V 60 Hz. 8413797579253 57925 230 V 50 Hz. 8413797579314 57931 220 V 60 Hz. 8413797579291 57929 220 V 60 Hz. USA 8413797579284 57928 120 V 50 Hz. UK 8413797579222 57922 120 V 60 Hz. USA 8413797579321 57932 380 V 50 Hz. 8413797579260 57926 380 V 60 Hz. 8413797579277 57927 157 DIAMANT DS-300-FC ( With slab holder). 3 HP-2.2 kw Three-phase motor 4 HP-3 kw 1 **1 230 V 50 Hz. 8413797599701 59970 240 V 50 Hz. AUSTR. 8413797599855 59985 230 V 50 Hz. UK 8413797599718 59971 220 V 60 Hz. 8413797599756 59975 380 V 50 Hz. 8413797599763 59976 220 V 60 Hz. USA 8413797599787 59978 120 V 50 Hz. UK 8413797599725 59972 120 V 60 Hz. USA 8413797599824 59982 PRODUCT ONLY WITH SPECIAL ORDERS. INQUIRE FOR AVAILABILITY DIAMANT DS-300-L 3 HP-2.2 kw 2.6 HP-1.9 kw* Three-phase motor 4 HP-3 kw 1 **1 230 V 50 Hz. 8413797589405 58940 230 V 50 Hz. UK 8413797589412 58941 230 V 50 Hz. CH* 8413797589504 58950 220 V 60 Hz. 8413797589450 58945 230 V 50 Hz. 8413797589511 58951 220 V 60 Hz. 8413797589498 58949 For ceramic tiles and all types of building materials such as brick, facebrick, fire brick, etc. With thermal and overload protection devices. Water pump refrigeration of blade (with flow control valve). Diamond blade Ø 12 (300 mm.) and 14 (350 mm.) not included. Motor assembly mounted on sliding bearings. Vertically adjustable and foldable mobile head for miter cuts. Ceramic fixing accessory (included with DS-300-L and DS-300-FC). * Using plunge cut effect. ** Useful cutting height: 1 stroke 3 15 /16 (100 mm.) with Ø 14 (350 mm.) disc. 220 V 60 Hz. USA 8413797589481 58948 120 V 50 Hz. UK 8413797589429 58942 120 V 60 Hz. USA 8413797589436 58943 240 V 50 Hz. AUSTR. 8413797589559 58955 380 V 50 Hz. 8413797589467 58946 380 V 60 Hz. 8413797589474 58947 With guide for repetitive cuts and fold-away accessory for repetitive miter cuts. With large table 23 x 33 (59 x 86 cm.) in DS-300 and 33 x 51 ( 86 x 130 cm.) in DS-300-L. Adjustable accessories: (see page 164) Roller table extension (Ref. 57940). Special miter joint decks (Ref. 57990). Ceramic fixing accessory for DS-300 (Ref. 57946). DS-300 2800 *35 24 x 24 3 / 5 12-14 57 x 25 x 55 250.2 Lb 302 Lb (*88 cm.) (62x62 cm.) (75 / 140 mm.) (300-350 mm.) (145x64x140 cm.) (113,5 kg.) (137 kg.) DS-300-FC 2800 *35 24 x 24 3 / 5 12-14 57 x 25 x 55 254.2 Lb 306.4 Lb (*88 cm.) (62x62 cm.) (75 / 140 mm.) (300-350 mm.) (145x64x140 cm.) (115,5 kg.) (139 kg.) DS-300-L 2800 *51 36 x 36 3 / 5 12-14 75 x 33 x 55 382.5 Lb 529.2 Lb (*130 cm.) (92x92 cm.) (75 / 140 mm.) (300-350 mm.) (193x87x140 cm.) (173,5 kg.) (240 kg.)
Electric saws Diamant DX and DX-L DX-350 Foldable head for miter cutting. Upper motor. (Photo DX-350) Plunge cut. DIAMANT DX 158 DIAMANT DX-350 3 HP-2.2 kw 2.6 HP-1.9 kw* Three-phase motor 4 HP-3 kw 1 **1 230 V 50 Hz. 8413797549201 54920 230 V 50 Hz. UK 8413797549218 54921 230 V 50 Hz. CH* 8413797549300 54930 230 V 50 Hz. 8413797549317 54931 220 V 60 Hz. 8413797549294 54929 220 V 60 Hz. 8413797549256 54925 120 V 50 Hz. UK 8413797549225 54922 120 V 60 Hz. USA 8413797549232 54923 380 V 50 Hz. 8413797549263 54926 380 V 60 Hz. 8413797549270 54927 DIAMANT DX-350-L 3 HP-2.2 kw 2.6 HP-1.9 kw* 230 V 50 Hz. 8413797549607 54960 230 V 50 Hz. UK 8413797549614 54961 230 V 50 Hz. CH* 8413797549706 54970 220 V 60 Hz. 8413797549652 54965 120 V 50 Hz. UK 8413797549621 54962 120 V 60 Hz. USA 8413797549638 54963 Three-phase motor 4 HP-3 kw 1 **1 230 V 50 Hz. 8413797549713 54971 220 V 60 Hz. 8413797549690 54969 380 V 50 Hz. 8413797549669 54966 380 V 60 Hz. 8413797549676 54967 For ceramic tiles and all types of building materials such as brick, facebrick, fire brick, etc. With thermal and overload security switches. Water pump refrigeration of blade (with flow control valve). Ø 14 (350 mm.) diamond blade not included. Motor assembly mounted on sliding bearings. Vertically adjustable and foldable mobile head for miter cuts. With guide for repetitive cuts and fold-away accessory for repetitive miter cuts. Ceramic fixing accessory included in DX-350-L. Electric cable: 4.9 ft. (1,5 m.) With table 23 x 33 (59 x 86 cm.) in DX-350 and 33 x 51 (86 x 130 cm.) in DX-350-L. Belt transmission. Special DX decks for 5 1 /8 (130 mm.) high cutting in one stroke. Roller table extension (Ref. 57940). Ceramic fixing accessory for DX-350 (Ref. 57946). * Using plunge cut effect. DX-350 2800 *32 23 x 23 4 / 9 14 57 x25 x59 287.7 Lb 319.7 Lb (*82,5 cm.) (58x58 cm.) (111 / 232 mm.) (350 mm.) (145x64x151 cm.) (130,5 kg.) (145 kg.) DX-350-L 2800 *49 35 x 35 4 / 9 14 75 x34 x59 418.9 Lb 582 Lb (*124,5 cm.) (88x88 cm.) (111 / 232 mm.) (350 mm.) (193x87x151 cm.) (190 kg.) (264 kg.)
Electric saws Diamant DT Lateral Stop DT-250 Foldable head for miter cutting. Belt drive. DIAMANT DT DIAMANT DT-250 2 HP-1.5 kw 1.5 HP-1.1 kw* 1 **1 230 V 50 Hz. 8413797589009 58900 230 V 50 Hz. UK 8413797589016 58901 230 V 50 Hz. CH 8413797589108 58910 230 V 50 Hz. AUSTR. 8413797589184 58918 220 V 60 Hz. 8413797589054 58905 120 V 50 Hz. U.K.* 8413797589023 58902 120 V 60 Hz. USA* 8413797589122 58912 230 V 50 Hz. DK 8413797589191 58919 159 For ceramic tiles and all types of building materials such as brick, facebrick, firebrick, etc. With thermic and overload security switches. Water pump refrigeration of blade (with flow control valve). Diamond blade Ø 10 (250 mm.) not included. Vertically mobile head with plunge cut and fold-away for miter cuts. Electric cable: 4.9 ft. (1,5 m.). With guide to allow repetitive cuts. With table 17 x 15 ( 44 x 40 cm.). Belt transmission. The saw allows a 10 1 /2 (26 cm.) tile to be cut in half. Adjustable accessories: (see page 164) Support table (Ref. 50935). * Using plunge cut effect. DT-250 2800 *21 14 x 14 3 / 4 10 33 x21 x24 119 Lb. 152.1 Lb (*52 cm.) (37x37 cm.) (60 / 110 mm.) (250 mm.) (85x54x61 cm.) (54 kg.) (69 kg.)
Electric saws Diamant DR-EN DR-300-EN Stop for repeated cuts. Foldable head for miter cutting. Adjustable plunge cut. DIAMANT DR-EN 160 DIAMANT DR-300-EN 230 V 50 Hz. 8413797589702 58970 3 HP-2.2 kw 230 V 50 Hz. UK 8413797589719 58971 2.6 HP-1.9 kw* 230 V 50 Hz. CH* 8413797589603 58960 Three-phase motor 4 HP-3 kw 1 1** 230 V 50 Hz. 8413797589610 58961 220 V 60 Hz. 8413797589795 58979 240 V 50 Hz. AUSTR. 8413797589658 58965 220 V 60 Hz. 8413797589757 58975 120 V 50 Hz. UK 8413797589726 58972 120 V 60 Hz. USA 8413797589733 58973 380 V 50 Hz. 8413797589764 58976 380 V 60 Hz. 8413797589771 58977 For ceramic tiles and all types of building materials such as brick, facebrick, fire brick, etc. With thermal and overload protection devices. Water pump refrigeration of blade (with flow control valve). diamond Blade Ø 12 (300 mm.) 14 (350 mm.) not included. Vertically mobile head with plunge cut capability and foldable head for miter cuts. Electric cable: 4.9 ft. (1,5 m.) With guide to allow repetitive cuts. Large sliding table 22 7 /8 x 20 2 /3 (58 x 52 cm.) mounted on sealed bearings. Direct drive. The saw allows a 12 1 /2 (31,5cm.) tile to be cut in half Adjustable accessories (see page 164 DR-EN 2800 *30 17 x 17 3 5 /8 / 6 12-14 43 x 27 x 52 169.9 Lb. 220.5 Lb. (*76 cm.) (44x44 cm.) (92 / 150 mm.) (300-350 mm.) (111x71x130 cm.) (77 kg.) (100 kg.) * Using plunge cut effect. ** Useful cutting height: 1 stroke 4 5 /8 (117 mm) with Ø 14 (350 mm) disc.
Electric saws Diamant DR DR-300 Stop for repeated cuts. Foldable head for miter cutting. Adjustable plunge cut. DIAMANT DR DIAMANT DR-300 3 HP-2.2 kw 2.6 HP-1.9 kw* Three-phase motor 4 HP-3 kw 1 1** 230 V 50 Hz. 8413797569209 56920 240 V 50 Hz. AUSTR. 8413797569353 56935 230 V 50 Hz. UK 8413797569216 56921 230 V 50 Hz. CH* 8413797569308 56930 230 V 50 Hz. 8413797569315 56931 220 V 60 Hz. 8413797569292 56929 220 V 60 Hz. 8413797569254 56925 120 V 50 Hz. UK 8413797569223 56922 120 V 60 Hz. USA 8413797569322 56932 230 V 50 Hz. DK. 8413797569360 56936 380 V 50 Hz. 8413797569261 56926 380 V 60 Hz. 8413797569278 56927 161 For ceramic tiles and all types of building materials such as brick, facebrick, fire brick, etc. With thermal and overload protection devices. Water pump refrigeration of blade (with flow control valve). diamond Blade Ø 12 (300 mm.) 14 (350 mm.) not included. Vertically mobile head with plunge cut capability and foldable head for miter cuts. Electric cable: 4.9 ft. (1,5 m.) With guide to allow repetitive cuts. Large sliding table 22 7 /8 x 20 2 /3 (58 x 52 cm.) mounted on sealed bearings. Direct drive. The saw allows a 12 1 /2 (31,5cm.) tile to be cut in half DR-300 2800 *30 17 x 17 3 5 /8 / 6 12-14 43 x 27 x 52 183.9 Lb. 237.7 Lb. (*76 cm.) (44x44 cm.) (92 / 150 mm.) (300-350 mm.) (111x71x130 cm.) (83.4 kg.) (106 kg.) * Using plunge cut effect. ** Useful cutting height: 1 stroke 4 5 /8 (117 mm) with Ø 14 (350 mm) disc.
162 Electric Saws
Electric Saws 163
Accessories for Electric Saws Ref. 05973 Ref. 45345 Ref. 45880 Ref. 45434/534 Ref. 57990/91/54939 Ref. 57945/46 Ref. 57947/48 FOR ELECTRIC SAWS CERAMIC BLOCK 5 8413797059731 05973 For cleaning of diamond blades. 164 DIAGONAL CUTTING GUIDES Fixed 45º. Plastic. 1 8413797453454 45345 0 to 90º adjustable guide. Metallic. 1 8413797458800 45880 For portable saws D-200 and ND-180/200/300. WATER TRAY For ND-180-E/180/200. 1 8413797454342 45434 Dimensions: 22 x 21 x 1 (56 x 55 x 2,5 cm.). WATER TRAY For ND-300. 1 8413797455342 45534 Dimensions: 27 x 25 x 1 (71 x 65 x 2,5 cm.). SET OF DECK SPECIAL FOR MITRING CUTS Special set of deck for mitering cuts. To create cuts in mitering judge accuracy. 1 8413797579918 57991 For machines DS-230-LPS, DS-250-EP, DW-LPS and DW-N. SET OF DECK SPECIAL FOR MITRING CUTS 1 8413797579901 57990 Special set of deck for mitering cuts. To create cuts in mitering judge accuracy. For machines DS-250/250-L and DS-300/300-L. DX SPECIAL DECKS 1 8413797549393 54939 Small diameter decks connectable to DX-350 and DX-350-L for making higher cuts. DS-250 CERAMIC FIXING FOR MACHINES BEFORE 2003 (includes table and securing). 1 8413797579451 57945 FOR MACHINES AFTER 2003 (only includes securing). 1 8413797579475 57947 DS-250 mounting for ceramic fixing and perfect measurement of the whole length of the cut. Guarantees a perfect finish with no size error. Indicate reference and series number of tile cutter before making order. DS-300 AND DX-350 CERAMIC FIXING FOR MACHINES BEFORE 2003 (includes table and securing). 1 8413797579468 57946 FOR MACHINES AFTER 2003 (only includes securing). 1 8413797579482 57948 DS-300 and DX-350 mounting for ceramic fixing and perfect measurement of the whole length of the cut. Guarantees a perfect finish with no size error. Indicate reference and series number of tile cutter before making order.
Accessories for Electric Saws Ref. 57940 Ref. 50935 Ref. 50935 B-100 B-101 SPARE PARTS FOR ELECTRIC SAWS WATER PUMP B101 1 For DIAMANT D, DR, DS, DT and DX and for the electric cleaner SPOMATIC. 230 V 50 Hz. 8413797569902 56990 220 V 60 Hz. 8413797569919 56991 120 V 50 Hz. 8413797569926 56992 120 V 60 Hz. 8413797569933 56993 WATER PUMP B100 1 For DIAMANT DU and DW. 230 V 50 Hz. 8413797569865 56986 220 V 60 Hz. 8413797569872 56987 120 V 50 Hz. 8413797569889 56988 120 V 60 Hz. 8413797569896 56989 165 SUPPORT TABLE 1 8413797509359 50935 New reinforced structure for greater stability. For DT-250, DU-200/200-L and DW-200/200-L. Dimensions: 26 x 20 x 28 (67 x 53 x 72 cm.). ROLLER TABLE EXTENSION 1 8413797579406 57940 For electric cutter DS-230-LPS, DS-250/FC/L, DS-300/FC/L, DU-200/200-L, DW-200/L/LP/LPS, DW-250-LPS and DX-350/350-L. With rollers to simplify movement of the tiles. With adjustable fold-away legs. Dimensions: 20 x 22 x 3 (51 x 56 x 8 cm.).. For other accessories and any replacements, verify in the exploding for each machine.