Product Informaton Unversal swvel unts SRU-plus
SRU-plus Unversal swvel unts Robust. Fast. Hgh Performance. SRU-plus unversal rotary actuator Unversal unt for pneumatc swvel and turnng movements. Feld of applcaton Can be used n ether clean or contamnated areas, anywhere where pneumatc swvelng s requred. Advantages Your benefts Fnely graded seres wth a steady ncrease n torque for multple cases of applcaton, the correct sze as a standard product s avalable Swvel angle can be selected as ether 90 or 180 complete flexblty n selectng the swvel angle; specal angles avalable on request End poston adjustablty +3 /-3 (small) or +3 /-90 (large) can be selected Mddle poston can be selected as pneumatc or locked The locked mddle poston can be unlocked when loaded. The two types of mddle postons always allow further rotaton n ether drecton. Flud feed-through can be used for gases, fluds, and vacuum therefore no nterferng hoses Electrcal rotary feed-through for long-lastng, relable feed-through of sensor, actuator or optonally bus sgnals Choce of electronc magnetc sensors or nductve proxmty sensors for absolute varablty of poston montorng Exchangeable screw-n gude sleeves (bushng) allow for easy mantenance and rapd exchange t after several mllon cycles. Seres extends downwards wth the SRU-mn seres, for a wde range of applcatons Szes Quantty: 10 Weght 1.2.. 26.5 kg Torque 3.. 115 Nm Repeat accuracy 0.05 Angle of rotaton 90.. 180 2
SRU-plus Unversal swvel unts Functonal descrpton When subjected to pressure, the two pneumatc pstons move ther end faces n a straght lne n ther respectve bores thus turnng the pnon by means of the serratons on ther sdes. SRU-plus Pneumatc, powerful double pston drve 1 Drve 2 Pnon Stable pnon, optonally avalable wth flud feedthrough, for transformng the pston movement nto a rotary movement 3 Housng weght-optmzed due to the use of hard-anodzed alumnum alloy 4 Sleeve technology For radal adjustment of the end postons wthout a settlng effect and ensurng rapd exchange for mantenance 5 Dampng Hydraulc shock absorbers for hgh moments of nerta CAD data, operatng manuals and other current product documents can be found onlne. 3
SRU-plus Unversal swvel unts General notes about the seres Standard condtons: The techncal data shown refers to an envronment of 20 C and atmospherc pressure. Housng materal: Alumnum (extruded profle) Actuaton: pneumatc, wth fltered compressed ar as per ISO 8573-1:2010 [7:4:4]. Operatng prncple: Double pston rack and pnon prncple Scope of delvery: Flow control valves, centerng bushngs, O-rngs for drect connecton, fttng screws (SRU-plus 63 only), assembly and operatng manual wth manufacturer s declaraton Warranty: 24 months Repeat accuracy: s defned as a dstrbuton of the end poston for 100 consecutve cycles. Pnon poston: s always shown n the left end poston. The pnon rotates from here to the rght n clockwse drecton. The arrow makes the drecton of rotaton clear. Pnon screw connecton dagram: Please note that when the rotatng angle s to be set for less than 90, the left stop wll generally be completely turned n. The left end poston therefore has a screw connecton dagram whch has been rotated by 90 n clockwse drecton n relaton to the drawng, whch s shown at a 180 angle of rotaton. Specal swvel angle: More swvel angles are avalable on request. Torque n the end postons: Please note that the fnal angular degrees (approx. 2 ) before the end poston can only be approached usng the force of a sngle drve pston. For ths reason, double actuated modules only have about half the rated torque avalable n ths area. An external stop can be used to provde the full torque even n the end postons. Travel to the pneumatc mddle poston: s carred out usng only half of the nomnal torque. Cycle tme: s the rotaton tme of pnon / flange around the nomnal rotaton angle. Valve swtchng tmes, hose fllng tmes, or PLC reacton tmes are not a part of ths and are to be consdered when cycle tmes are calculated. Applcaton example Unt for rotary exchange of roughly postoned small components Unt for turnng and jonng of small components 1 Rotary Actuator SRU-plus 2 TCU tolerance compensaton unt 3 PGN-plus 2-fnger parallel grpper 4
SRU-plus Unversal swvel unts SCHUNK offers more... The followng components make the product SRU-plus even more productve the sutable addton for the hghest functonalty, flexblty, relablty, and controlled producton. Centerng sleeves Fttngs MMS magnetc swtch Inductve Proxmty Swtches Sensor dstrbutor PGN-plus unversal grpper Sensor cables Pressure mantenance valve PZN-plus unversal grpper Unversal angular grpper PWG-plus DPZ-plus 3-fnger centrc grpper DPG-plus sealed unversal grpper Addtonal nformaton regardng the products can be found on the followng product pages or at www.schunk.com. Please contact us for further nformaton: SCHUNK techncal hotlne +49-7133-103-2696 Optons and specal nformaton For partcularly dampng-ntensve swvel movements, addtonal, external shock absorbers can be ftted. Due to the nnovatve sleeve technology, specal rotaton angles of more than 180 can be provded quckly and economcally. Please contact us for assstance. We are also happy to provde our electrcal feed-throughs wth M5 or M12 connectons on request. On request the electrcal feed-throughs can also be used to transmt bus sgnals. Please note that sutable emergency stop scenaros (e.g. controlled shut down) and restartng scenaros (e.g. pressure buld-up valves, approprate valve swtchng sequences) are needed for all pneumatc actuators. Cuttng off the pressure n an uncontrolled manner could lead to undefned states and behavor. 5
SRU-plus Unversal swvel unts Applcaton-specfc parameters Torque Mass moment of nerta Swvelng tme Cycles per hour SRU-plus_EN_ausDrehmodule_S121.pdf Sze 20 25 30 35 40 50 60 63 Dampng Speed Soft Hard Angle of rotaton 0 90 0 180 0 90 180 End poston adjustment range 3 3 90 3 90 3 Center poston none pneumatc (M) locked (VM) Flud feed-through wthout wth flud feed- wth EDF flud wthout wth flud feed- EDF wth flud through feed-through and through feed-through and electrc feed-th- electrc feed- rough through Accessores (see catalog secton Accessores ) MMS 22 magnetc proxmty swtches IN 80 nductve proxmty swtches and mountng kts We are happy to assst you wth your selecton. SCHUNK Techncal Hotlne +49-7133-103-2696 6
SRU-plus Unversal swvel unts SRU-plus_EN_ausDrehmodule_S120.pdf Sample Order Desgnaton SRU-plus Sze 20 / 25 / 30 / 35 / 40 / 50 / 60 / 63 SRU-plus 20 - S - 180-3 - M - 4 - M8 - AS Dampng method S = Speed (for sze 20) W = Soft H = Hard (for hgh payload) Angle of rotaton 90 / 180 End poston adjustment range 3 / 90 Center poston - = none M = Center poston pneumatc VM = Center poston locked Number of flud feed-throughs - = no flud feed-through 4 = for szes 20 35 8 = for szes 40 63 Plug sze for electrc feed-through - = no electrc feed-through M5 = M5 plug on the rotatng sde M8 = M8 plug on the rotatng sde M12 = M12 plug on the rotatng sde Mountng kt for nductve proxmty swtches - = no mountng kt AS = wth mountng kt Torque Graduaton 120 100 Torque [Nm] 80 60 40 20 0 SRU-plus 20 SRU-plus 25 SRU-plus 30 SRU-plus 35 SRU-plus 40 SRU-plus 50 SRU-plus 60 SRU-plus 63 7
SRU-plus 20 Unversal swvel unts Pnon load The ndcated moments and forces are statcal values and should not appear smultaneously Throttlng has to be done for ensurng that the rotary moton takes place wthout mpact or bouncng. otherwse the servce lfe reduces. M y max. 10.4 Nm F z max. 800 N Techncal data of SRU-plus wthout mddle poston Desgnaton (soft dampng) SRU-plus 20-W-90-3 SRU-plus 20-W-180-3 SRU-plus 20-W-180-90 ID 0361400 0361420 0361450 End poston dampng Sprng-elastomer Sprng-elastomer Sprng-elastomer Descrpton (Speed Dampng) SRU-plus 20-S-90-3 SRU-plus 20-S-180-3 SRU-plus 20-S-180-90 ID 0361300 0361320 0361350 End poston dampng Damper-elastomer Damper-elastomer Damper-elastomer Angle of rotaton [ ] 90.0 180.0 180.0 End poston adjustablty [ ] 3.0 3.0 90.0 Torque [Nm] 3.4 3.4 3.4 Mddle poston none none none Protecton class IP 67 67 67 Weght [kg] 1.20 1.20 1.24 Flud consumpton (2 x nomnal angle) [cm³] 36.0 60.0 60.0 Nomnal operatng pressure [bar] 6.0 6.0 6.0 mn./max. operatng pressure [bar] 4/8 4/8 4/8 Dameter of connectng hose 6 x 3.9 x 1.05 6 x 3.9 x 1.05 6 x 3.9 x 1.05 mn./max. ambent temperature [ C] 5/60 5/60 5/60 Repeat accuracy [ ] 0.05 0.05 0.05 Cleanroom class ISO 14644-1 5 5 5 Optons wth flud feed-through Desgnaton (soft dampng) SRU-plus 20-W-90-3-4 SRU-plus 20-W-180-3-4 SRU-plus 20-W-180-90-4 ID 0361402 0361422 0361452 Descrpton (Speed Dampng) SRU-plus 20-S-90-3-4 SRU-plus 20-S-180-3-4 SRU-plus 20-S-180-90-4 ID 0361302 0361322 0361352 Torque [Nm] 3.0 3.0 3.0 Weght [kg] 1.4 1.4 1.44 No. of flud feed-throughs 4 4 4 max. pressure n the ar feed-through [bar] 8 8 8 Optons wth flud and electrc feed-through Desgnaton (soft dampng) SRU-plus 20-W-90-3-4-M8 SRU-plus 20-W-180-3-4-M8 SRU-plus 20-W-180-90-4-M8 ID 0361404 0361424 0361454 Descrpton (Speed Dampng) SRU-plus 20-S-90-3-4-M8 SRU-plus 20-S-180-3-4-M8 SRU-plus 20-S-180-90-4-M8 ID 0361304 0361324 0361354 Weght [kg] 2.05 2.05 2.09 Number / sze of E-fttngs on the output sde 6/M8 6/M8 6/M8 Number of wres 10 10 10 max. voltage [V] 24 24 24 Max. current per wre / total [A] 1/1 1/1 1/1 Optons wth flud and electrc feed-through and mountng kt Desgnaton (soft dampng) SRU-plus 20-W-90-3-4-M8-AS SRU-plus 20-W-180-3-4-M8-AS SRU-plus 20-W-180-90-4-M8-AS ID 0361407 0361427 0361457 Descrpton (Speed Dampng) SRU-plus 20-S-90-3-4-M8-AS SRU-plus 20-S-180-3-4-M8-AS SRU-plus 20-S-180-90-4-M8-AS ID 0361307 0361327 0361357 8
SRU-plus 20 Unversal swvel unts Max. admssble nerta J Mass moment of nerta Cycles per hour The dagrams are vald for swvel angles of 90 and 180, unts wthout center poston and for applcatons wth a vertcal swvel axs as well as for absolutely centrc loads wth a horzontal rotary axs and wth a pneumatc operatng pressure of 6 bar. The swvelng tmes per throttlng have to be observed, otherwse the lfe tme could reduce. We wll be happy to help you to desgn other cases of applcaton. Swvelng tme Techncal data of SRU-plus wth mddle poston Descrpton (Speed Dampng) SRU-plus 20-S-180-3-M SRU-plus 20-S-180-3-VM SRU-plus 20-S-180-90-M ID 0361330 0361340 0361360 End poston dampng Damper-elastomer Damper-elastomer Damper-elastomer Angle of rotaton [ ] 180.0 180.0 180.0 End poston adjustablty [ ] 3.0 3.0 90.0 Torque [Nm] 3.4 3.4 3.4 Mddle poston 1 x M (pneumatc) 1 x VM (locked) 1 x M (pneumatc) Adjustablty of mddle poston [ ] 3.0 3.0 3.0 Protecton class IP 67 67 67 Weght [kg] 1.55 1.76 1.60 Flud consumpton (2 x nomnal angle) [cm³] 60.0 60.0 60.0 Nomnal operatng pressure [bar] 6.0 6.0 6.0 mn./max. operatng pressure [bar] 4/8 4/6.5 4/8 Dameter of connectng hose 6 x 3.9 x 1.05 6 x 3.9 x 1.05 6 x 3.9 x 1.05 mn./max. ambent temperature [ C] 5/60 5/60 5/60 Repeat accuracy [ ] 0.05 0.05 0.05 Cleanroom class ISO 14644-1 5 5 5 Optons wth flud feed-through Descrpton (Speed Dampng) SRU-plus 20-S-180-3-M-4 SRU-plus 20-S-180-3-VM-4 SRU-plus 20-S-180-90-M-4 ID 0361332 0361342 0361362 Torque [Nm] 3.0 3.0 3.0 Weght [kg] 1.75 1.96 1.8 No. of flud feed-throughs 4 4 4 max. pressure n the ar feed-through [bar] 8 8 8 Optons wth flud and electrc feed-through Descrpton (Speed Dampng) SRU-plus 20-S-180-3-M-4-M8 SRU-plus 20-S-180-3-VM-4-M8 SRU-plus 20-S-180-90-M-4-M8 ID 0361334 0361344 0361364 Weght [kg] 2.4 2.61 2.45 Number / sze of E-fttngs on the output sde 6/M8 6/M8 6/M8 Number of wres 10 10 10 max. voltage [V] 24 24 24 Max. current per wre / total [A] 1/1 1/1 1/1 Optons wth flud and electrc feed-through and mountng kt Descrpton (Speed Dampng) SRU-plus 20-S-180-3-M-4-M8-AS SRU-plus 20-S-180-3-VM-4-M8-AS SRU-plus 20-S-180-90-M-4-M8-AS ID 0361337 0361347 0361367 All modules are also avalable n a Vton verson. Please contact us for detals. 9
SRU-plus 20 Unversal swvel unts Man vew for SRU-plus wthout EDF The man vew shows the SRU-plus n the most basc verson, wth a swvel angle of 180 /90, small end poston adjustablty of 3, wthout a mddle poston, and wthout flud feed-through. The SDV-P pressure mantenance valve can be used to mantan the poston n the case of a loss of pressure (see Accessores catalog secton). A, a Man / drect connecton, swvel unt clockwse turnng B, b Man / drect connecton, swvel unt counterclockwse turnng 1 Connecton swvel unt GL Ft for centerng sleeves GM Ft for centerng pns HT Depth of the centerng sleeve hole n the counter part IT Cover caps IK Not ntended for mountng the unt, only for attachments IL Sensor MMS 22.. 10
SRU-plus 20 Unversal swvel unts Man vew for SRU-plus wth EDF The man vew shows the SRU-plus wth the EDF and flud feed-through n the most basc verson, wth a swvel angle of 180 /90, small end poston adjustablty of 3, and wthout a mddle poston. The SRU-plus swvel unt wth the EDF opton can only be mounted from the bottom. A, a Man / drect connecton, swvel unt clockwse turnng B, b Man / drect connecton, swvel unt counterclockwse turnng 1 Connecton swvel unt 2 Attachment connecton BO Flud feed-through GL Ft for centerng sleeves HT Depth of the centerng sleeve hole n the counter part HM Input for 3 pole sensor feed-through HN Input for 4 pole sensor feed-through HO Sensor feed-through output 11
SRU-plus 20 Unversal swvel unts Hose-free drect connecton M5 Pnon wthout flud feed-through 3 Adapter 4 Rotary unt The drect connecton s used for supplyng compressed ar wthout hoses. Instead, the pressure medum s fed through bore-holes n the mountng plate. 2 Attachment connecton BR Through-hole GL Ft for centerng sleeves GQ Clearance for fttng screw Mountng pattern for fastenng the rotatng load to the pnon. The 4x large threads for 4 screws and 2 counter bores for centerng sleeves opton s preferable to the 4x small threads for 2 screws and 2 shoulder bots (n the deeper counter bores) opton. Pnon wth flud feed-through Large end poston adjustablty 90 2 Attachment connecton BR Through-hole GL Ft for centerng sleeves Pnon screw connecton dagram for the flud feed-through opton. The preferred drllng pattern s 2 x screws and 2 x screws wth centerng sleeve (n ø 8 H7). Vew applcable only for versons wthout EDF! IT Cover caps Dmensonal changes for the opton wth large end poston adjustablty (90 ). Ths permts the end postons to be adjusted by up to 93. More nformaton can be found n the ntroducton to the seres. 12
SRU-plus 20 Unversal swvel unts Pneumatc mddle poston (M) Locked mddle poston (VM) A, a Man / drect connecton, swvel unt clockwse turnng B, b Man / drect connecton, swvel unt counterclockwse turnng C, c Man / drect connecton, mddle poston D, d Man / drect connecton, mddle poston Dmensonal changes for the opton wth the pneumatc mddle poston. Heavy attachments may swng before they reach the fnal poston. The locked mddle poston (VM) can resolve ths. A, a Man / drect connecton, swvel unt clockwse turnng B, b Man / drect connecton, swvel unt counterclockwse turnng C, c Man / drect connecton, mddle poston D, d Man / drect connecton, mddle poston Dmensonal changes wth the locked mddle poston (VM) opton. The mddle poston s locked and s actuated wth the force of the man drve pston. Shock absorbers dampen the travel to the mddle poston and prevent overshootng. Connectons for flud feed-through Adapter plate desgn A, a Man / drect connecton, swvel unt clockwse turnng B, b Man / drect connecton, swvel unt counterclockwse turnng BO Flud feed-through GL Ft for centerng sleeves HT Depth of the centerng sleeve hole n the counter part Suggested here s an adapter plate desgn whch allows for all flud feed-throughs to be accessed as easly as possble. Vew applcable only for versons wthout EDF! Lower mountng plate for the flud feed-through opton. Vacuum, gases or fluds can be fed through. The connecton may be a screw type or a drect connecton. Vew applcable only for versons wthout EDF! 13
SRU-plus 20 Unversal swvel unts Pneumatc dagram of SRU-plus-VM vertcal axs Pneumatc dagram of SRU-plus-VM horzontal axs 0 VM rotary actuators wth a vertcal rotary axs are generally actuated by two 5/3 drectonal control valves wth an exhausted mddle poston. To prevent damage, t s essental to pay attenton to the actuaton sequence ndcated n the operatng manual. VM rotary actuators wth a horzontal or non-vertcal rotary axs must generally be actuated by three 5/3 drectonal control valves wth an exhausted mddle poston. To prevent damage, t s essental to pay attenton to the actuaton sequence ndcated n the operatng manual. Attachment kt for proxmty swtch at SRU-plus wth EDF Dstrbutor for SRU-plus The attachment kt cannot be ordered separately. The SRU-plus wth EDF and attachment kt are delvered as a complete unt by SCHUNK. Please pay attenton to our optons SRU-plus -AS. 3 Adapter BO Flud feed-through FQ Dstrbutor for meda feed-through GL Ft for centerng sleeves The dstrbutor for SRU-plus facltates the use of the flud feed-throughs, both at the drect attachment to the dstrbutor, and n the lnes conveyng the flud nsde the adapter plate. Due to the dstrbutor, only a smple drllng pattern has to be drlled n the adapter plate located between the pnon and the dstrbutor. Descrpton ID Dstrbutor for SRU-plus V-SRU-plus 20/25/30 0357392 Vew applcable only for versons wthout EDF! 14
SRU-plus 20 Unversal swvel unts Attachment kt for proxmty swtch at SRU-plus wthout EDF Inductve proxmty swtches IN for SRU-plus wthout EDF IT AS-NHS-F-SRU-plus 20 IK AS-NHS-SRU-plus 20 The sze-specfc attachment kt s requred for nstallng the nductve proxmty swtches. Up to three proxmty swtches (2x end poston, 1x mddle poston) can be attached usng the attachment kt. Descrpton ID Mountng kt for proxmty swtch wth adjustable cam AS-NHS-SRU-plus 20/25/30-4 0361491 AS-NHS-SRU-plus 20/30 0361490 Mountng kt for proxmty swtch wth fxed cam AS-NHS-F-SRU-plus 20 0361495 AS-NHS-F-SRU-plus 20-4 0361494 Please note the number of necessary feed-throughs for your swvel unt when selectng the proper attachment kt. AQ Cable outlet IT Sensor IN... IK Sensor IN..-SA End and ntermedate poston montorng can be mounted wth mountng kt Descrpton ID Often combned Mountng kt for proxmty swtch wth adjustable cam AS-NHS-SRU-plus 20/25/30-4 0361491 AS-NHS-SRU-plus 20/30 0361490 Mountng kt for proxmty swtch wth fxed cam AS-NHS-F-SRU-plus 20 0361495 AS-NHS-F-SRU-plus 20-4 0361494 Inductve Proxmty Swtches IN 80-S-M12 0301578 IN 80-S-M8 0301478 IN-C 80-S-M8 0301475 INK 80-S 0301550 INK 80-SL 0301579 Inductve proxmty swtch wth lateral outlet IN 80-S-M12-SA 0301587 IN 80-S-M8-SA 0301483 INK 80-S-SA 0301566 Vew applcable only for versons wthout EDF! 15
SRU-plus 20 Unversal swvel unts Inductve proxmty swtches IN for SRU-plus wth EDF Electronc magnetc swtches MMS End and ntermedate poston montorng mounted drectly Descrpton ID Often combned Inductve Proxmty Swtches IN 80-S-M12 0301578 IN 80-S-M8 0301478 IN-C 80-S-M8 0301475 INK 80-S 0301550 INK 80-SL 0301579 Inductve proxmty swtch wth lateral outlet IN 80-S-M12-SA 0301587 IN 80-S-M8-SA 0301483 INK 80-S-SA 0301566 Cable extenson KV BG12-SG12 3P-0030-PNP 0301999 KV BG12-SG12 3P-0060-PNP 0301998 KV BW08-SG08 3P-0030-PNP 0301495 KV BW08-SG08 3P-0100-PNP 0301496 KV BW08-SG08 3P-0200-PNP 0301497 KV BW12-SG12 3P-0030-PNP 0301595 KV BW12-SG12 3P-0100-PNP 0301596 KV BW12-SG12 3P-0200-PNP 0301597 clp for plug/socket CLI-M12 0301464 CLI-M8 0301463 Connecton cables KA BG08-L 3P-0300-PNP 0301622 KA BG08-L 3P-0500-PNP 0301623 KA BG12-L 3P-0500-PNP 30016369 KA BW08-L 3P-0300-PNP 0301594 KA BW08-L 3P-0500-PNP 0301502 KA BW12-L 3P-0300-PNP 0301503 KA BW12-L 3P-0500-PNP 0301507 Sensor dstrbutor V2-M12 0301776 V2-M8 0301775 V4-M12 0301747 V4-M8 0301746 V8-M12 0301752 V8-M8 0301751 AQ Cable outlet IT Sensor MMS 22.. IK Sensor MMS 22...-SA End and ntermedate poston montorng mounted n C-slot Descrpton ID Often combned Electronc magnetc swtches MMS MMS 22-S-M8-PNP 0301032 MMSK 22-S-PNP 0301034 MMS electronc magnetc swtches wth lateral outlet MMS 22-S-M8-PNP-SA 0301042 MMSK 22-S-PNP-SA 0301044 Cable extenson KV BW08-SG08 3P-0030-PNP 0301495 KV BW08-SG08 3P-0100-PNP 0301496 KV BW08-SG08 3P-0200-PNP 0301497 clp for plug/socket CLI-M8 0301463 Connecton cables KA BG08-L 3P-0300-PNP 0301622 KA BG08-L 3P-0500-PNP 0301623 KA BW08-L 3P-0300-PNP 0301594 KA BW08-L 3P-0500-PNP 0301502 Sensor dstrbutor V2-M8 0301775 V4-M8 0301746 V8-M8 0301751 Two sensors (closer/s) are requred for each unt and extenson cables are avalable as an opton. For sensor cables, note the mnmum permssble bendng rad. These are generally 35 mm. Two sensors (closer/s) are requred for each unt and extenson cables are avalable as an opton. For sensor cables, note the mnmum permssble bendng rad. These are generally 35 mm. 16
SRU-plus 20 Unversal swvel unts Programmable magnetc swtches MMS PI1 AQ Cable outlet IT Sensor MMS 22 PI1-... IK Sensor MMS 22..-PI1-...-SA Poston montorng wth one programmable poston per sensor and electroncs ntegrated n the sensor. Can be programmed usng MT magnetc teachng tool (ncluded n scope of delvery) or ST plug teachng tool (optonal). End poston montorng s mounted n the C-slot. If the ST plug teachng tools are lsted n the table provded, teachng s only possble wth the ST teachng tools. Descrpton ID Often combned Programmable magnetc swtches MMS PI1 MMS 22-PI1-S-M8-PNP 0301160 MMSK 22-PI1-S-PNP 0301162 Programmable magnetc swtches MMS PI1 wth lateral cable outlet MMS 22-PI1-S-M8-PNP-SA 0301166 MMSK 22-PI1-S-PNP-SA 0301168 Programmable magnetc swtches MMS PI1 wth stanless steel housng MMS 22-PI1-S-M8-PNP-HD 0301110 MMSK 22-PI1-S-PNP-HD 0301112 Two sensors (closer/s) are requred for each unt and extenson cables are avalable as an opton. For sensor cables, note the mnmum permssble bendng rad. These are generally 35 mm. 17
SRU-plus 25 Unversal swvel unts Pnon load The ndcated moments and forces are statcal values and should not appear smultaneously Throttlng has to be done for ensurng that the rotary moton takes place wthout mpact or bouncng. otherwse the servce lfe reduces. M y max. 10.4 Nm F z max. 800 N Techncal data of SRU-plus wthout mddle poston Desgnaton (soft dampng) SRU-plus 25-W-90-3 SRU-plus 25-W-180-3 SRU-plus 25-W-180-90 ID 0361600 0361620 0361650 Descrpton (Hard Dampng) SRU-plus 25-H-90-3 SRU-plus 25-H-180-3 SRU-plus 25-H-180-90 ID 0361700 0361720 0361750 End poston dampng Hydr. damper Hydr. damper Hydr. damper Angle of rotaton [ ] 90.0 180.0 180.0 End poston adjustablty [ ] 3.0 3.0 90.0 Torque [Nm] 5.0 5.0 5.0 Mddle poston none none none Protecton class IP 67 67 67 Weght [kg] 1.60 1.60 1.65 Flud consumpton (2 x nomnal angle) [cm³] 60.0 88.0 88.0 Nomnal operatng pressure [bar] 6.0 6.0 6.0 mn./max. operatng pressure [bar] 4/8 4/8 4/8 Dameter of connectng hose 6 x 3.9 x 1.05 6 x 3.9 x 1.05 6 x 3.9 x 1.05 mn./max. ambent temperature [ C] 5/60 5/60 5/60 Repeat accuracy [ ] 0.05 0.05 0.05 Cleanroom class ISO 14644-1 5 5 5 Optons wth flud feed-through Desgnaton (soft dampng) SRU-plus 25-W-90-3-4 SRU-plus 25-W-180-3-4 SRU-plus 25-W-180-90-4 ID 0361602 0361622 0361652 Descrpton (Hard Dampng) SRU-plus 25-H-90-3-4 SRU-plus 25-H-180-3-4 SRU-plus 25-H-180-90-4 ID 0361702 0361722 0361752 Torque [Nm] 4.6 4.6 4.6 Weght [kg] 1.8 1.8 1.85 No. of flud feed-throughs 4 4 4 max. pressure n the ar feed-through [bar] 8 8 8 Optons wth flud and electrc feed-through Desgnaton (soft dampng) SRU-plus 25-W-90-3-4-M8 SRU-plus 25-W-180-3-4-M8 SRU-plus 25-W-180-90-4-M8 ID 0361604 0361624 0361654 Descrpton (Hard Dampng) SRU-plus 25-H-90-3-4-M8 SRU-plus 25-H-180-3-4-M8 SRU-plus 25-H-180-90-4-M8 ID 0361704 0361724 0361754 Weght [kg] 2.45 2.45 2.5 Number / sze of E-fttngs on the output sde 6/M8 6/M8 6/M8 Number of wres 10 10 10 max. voltage [V] 24 24 24 Max. current per wre / total [A] 1/1 1/1 1/1 Optons wth flud and electrc feed-through and mountng kt Desgnaton (soft dampng) SRU-plus 25-W-90-3-4-M8-AS SRU-plus 25-W-180-3-4-M8-AS SRU-plus 25-W-180-90-4-M8-AS ID 0361607 0361627 0361657 Descrpton (Hard Dampng) SRU-plus 25-H-90-3-4-M8-AS SRU-plus 25-H-180-3-4-M8-AS SRU-plus 25-H-180-90-4-M8-AS ID 0361707 0361727 0361757 18
SRU-plus 25 Unversal swvel unts Max. admssble nerta J Mass moment of nerta Cycles per hour Mass moment of nerta The dagrams are vald for swvel angles of 90 and 180, unts wthout center poston and for applcatons wth a vertcal swvel axs as well as for absolutely centrc loads wth a horzontal rotary axs and wth a pneumatc operatng pressure of 6 bar. The swvelng tmes per throttlng have to be observed, otherwse the lfe tme could reduce. We wll be happy to help you to desgn other cases of applcaton. Swvelng tme Swvelng tme Techncal data of SRU-plus wth mddle poston Desgnaton (soft dampng) SRU-plus 25-W-180-3-M SRU-plus 25-W-180-3-VM SRU-plus 25-W-180-90-M ID 0361630 0361640 0361660 End poston dampng Hydr. damper Hydr. damper Hydr. damper Angle of rotaton [ ] 180.0 180.0 180.0 End poston adjustablty [ ] 3.0 3.0 90.0 Torque [Nm] 5.0 5.0 5.0 Mddle poston 1 x M (pneumatc) 1 x VM (locked) 1 x M (pneumatc) Adjustablty of mddle poston [ ] 3.0 3.0 3.0 Protecton class IP 67 67 67 Weght [kg] 2.20 2.60 2.25 Flud consumpton (2 x nomnal angle) [cm³] 88.0 88.0 88.0 Nomnal operatng pressure [bar] 6.0 6.0 6.0 mn./max. operatng pressure [bar] 4/8 4/6.5 4/8 Dameter of connectng hose 6 x 3.9 x 1.05 6 x 3.9 x 1.05 6 x 3.9 x 1.05 mn./max. ambent temperature [ C] 5/60 5/60 5/60 Repeat accuracy [ ] 0.05 0.05 0.05 Cleanroom class ISO 14644-1 5 5 5 Optons wth flud feed-through Desgnaton (soft dampng) SRU-plus 25-W-180-3-M-4 SRU-plus 25-W-180-3-VM-4 SRU-plus 25-W-180-90-M-4 ID 0361632 0361642 0361662 Torque [Nm] 4.6 4.6 4.6 Weght [kg] 2.4 2.8 2.45 No. of flud feed-throughs 4 4 4 max. pressure n the ar feed-through [bar] 8 8 8 Optons wth flud and electrc feed-through Desgnaton (soft dampng) SRU-plus 25-W-180-3-M-4-M8 SRU-plus 25-W-180-3-VM-4-M8 SRU-plus 25-W-180-90-M-4-M8 ID 0361634 0361644 0361664 Weght [kg] 3.05 3.45 3.1 Number / sze of E-fttngs on the output sde 6/M8 6/M8 6/M8 Number of wres 10 10 10 max. voltage [V] 24 24 24 Max. current per wre / total [A] 1/1 1/1 1/1 Optons wth flud and electrc feed-through and mountng kt Desgnaton (soft dampng) SRU-plus 25-W-180-3-M-4-M8-AS SRU-plus 25-W-180-3-VM-4-M8-AS SRU-plus 25-W-180-90-M-4-M8-AS ID 0361637 0361647 0361667 All modules are also avalable n a Vton verson. Please contact us for detals. 19
SRU-plus 25 Unversal swvel unts Man vew for SRU-plus wthout EDF The man vew shows the SRU-plus n the most basc verson, wth a swvel angle of 180 /90, small end poston adjustablty of 3, wthout a mddle poston, and wthout flud feed-through. The SDV-P pressure mantenance valve can be used to mantan the poston n the case of a loss of pressure (see Accessores catalog secton). A, a Man / drect connecton, swvel unt clockwse turnng B, b Man / drect connecton, swvel unt counterclockwse turnng 1 Connecton swvel unt GL Ft for centerng sleeves GM Ft for centerng pns HT Depth of the centerng sleeve hole n the counter part IT Cover caps IK Not ntended for mountng the unt, only for attachments IL Sensor MMS 22.. 20
SRU-plus 25 Unversal swvel unts Man vew for SRU-plus wth EDF The man vew shows the SRU-plus wth the EDF and flud feed-through n the most basc verson, wth a swvel angle of 180 /90, small end poston adjustablty of 3, and wthout a mddle poston. The SRU-plus swvel unt wth the EDF opton can only be mounted from the bottom. A, a Man / drect connecton, swvel unt clockwse turnng B, b Man / drect connecton, swvel unt counterclockwse turnng 1 Connecton swvel unt 2 Attachment connecton BO Flud feed-through GL Ft for centerng sleeves HT Depth of the centerng sleeve hole n the counter part HM Input for 3 pole sensor feed-through HN Input for 4 pole sensor feed-through HO Sensor feed-through output 21
SRU-plus 25 Unversal swvel unts Hose-free drect connecton M5 Pnon wthout flud feed-through 3 Adapter 4 Rotary unt The drect connecton s used for supplyng compressed ar wthout hoses. Instead, the pressure medum s fed through bore-holes n the mountng plate. 2 Attachment connecton BR Through-hole GL Ft for centerng sleeves GQ Clearance for fttng screw Mountng pattern for fastenng the rotatng load to the pnon. The 4x large threads for 4 screws and 2 counter bores for centerng sleeves opton s preferable to the 4x small threads for 2 screws and 2 shoulder bots (n the deeper counter bores) opton. Pnon wth flud feed-through Large end poston adjustablty 90 2 Attachment connecton BR Through-hole GL Ft for centerng sleeves Pnon screw connecton dagram for the flud feed-through opton. The preferred drllng pattern s 2 x screws and 2 x screws wth centerng sleeve (n ø 8 H7). Vew applcable only for versons wthout EDF! IT Cover caps Dmensonal changes for the opton wth large end poston adjustablty (90 ). Ths permts the end postons to be adjusted by up to 93. More nformaton can be found n the ntroducton to the seres. 22
SRU-plus 25 Unversal swvel unts Pneumatc mddle poston (M) Locked mddle poston (VM) A, a Man / drect connecton, swvel unt clockwse turnng B, b Man / drect connecton, swvel unt counterclockwse turnng C, c Man / drect connecton, mddle poston D, d Man / drect connecton, mddle poston Dmensonal changes for the opton wth the pneumatc mddle poston. Heavy attachments may swng before they reach the fnal poston. The locked mddle poston (VM) can resolve ths. A, a Man / drect connecton, swvel unt clockwse turnng B, b Man / drect connecton, swvel unt counterclockwse turnng C, c Man / drect connecton, mddle poston D, d Man / drect connecton, mddle poston Dmensonal changes wth the locked mddle poston (VM) opton. The mddle poston s locked and s actuated wth the force of the man drve pston. Shock absorbers dampen the travel to the mddle poston and prevent overshootng. Connectons for flud feed-through Adapter plate desgn A, a Man / drect connecton, swvel unt clockwse turnng B, b Man / drect connecton, swvel unt counterclockwse turnng BO Flud feed-through GL Ft for centerng sleeves HT Depth of the centerng sleeve hole n the counter part Suggested here s an adapter plate desgn whch allows for all flud feed-throughs to be accessed as easly as possble. Vew applcable only for versons wthout EDF! Lower mountng plate for the flud feed-through opton. Vacuum, gases or fluds can be fed through. The connecton may be a screw type or a drect connecton. Vew applcable only for versons wthout EDF! 23
SRU-plus 25 Unversal swvel unts Pneumatc dagram of SRU-plus-VM vertcal axs Pneumatc dagram of SRU-plus-VM horzontal axs 0 VM rotary actuators wth a vertcal rotary axs are generally actuated by two 5/3 drectonal control valves wth an exhausted mddle poston. To prevent damage, t s essental to pay attenton to the actuaton sequence ndcated n the operatng manual. VM rotary actuators wth a horzontal or non-vertcal rotary axs must generally be actuated by three 5/3 drectonal control valves wth an exhausted mddle poston. To prevent damage, t s essental to pay attenton to the actuaton sequence ndcated n the operatng manual. Attachment kt for proxmty swtch at SRU-plus wth EDF Dstrbutor for SRU-plus The attachment kt cannot be ordered separately. The SRU-plus wth EDF and attachment kt are delvered as a complete unt by SCHUNK. Please pay attenton to our optons SRU-plus -AS. 3 Adapter BO Flud feed-through FQ Dstrbutor for meda feed-through GL Ft for centerng sleeves The dstrbutor for SRU-plus facltates the use of the flud feed-throughs, both at the drect attachment to the dstrbutor, and n the lnes conveyng the flud nsde the adapter plate. Due to the dstrbutor, only a smple drllng pattern has to be drlled n the adapter plate located between the pnon and the dstrbutor. Descrpton ID Dstrbutor for SRU-plus V-SRU-plus 20/25/30 0357392 Vew applcable only for versons wthout EDF! 24
SRU-plus 25 Unversal swvel unts Attachment kt for proxmty swtch at SRU-plus wthout EDF Inductve proxmty swtches IN for SRU-plus wthout EDF IT AS-NHS-F-SRU-plus 25/30 IK AS-NHS-SRU-plus 25 The sze-specfc attachment kt s requred for nstallng the nductve proxmty swtches. Up to three proxmty swtches (2x end poston, 1x mddle poston) can be attached usng the attachment kt. Descrpton ID Mountng kt for proxmty swtch wth adjustable cam AS-NHS-SRU-plus 20/25/30-4 0361491 AS-NHS-SRU-plus 25 0361690 Mountng kt for proxmty swtch wth fxed cam AS-NHS-F-SRU-plus 25/30 0361695 AS-NHS-F-SRU-plus 25/30-4 0361496 Please note the number of necessary feed-throughs for your swvel unt when selectng the proper attachment kt. AQ Cable outlet IT Sensor IN... IK Sensor IN..-SA End and ntermedate poston montorng can be mounted wth mountng kt Descrpton ID Often combned Mountng kt for proxmty swtch wth adjustable cam AS-NHS-SRU-plus 20/25/30-4 0361491 AS-NHS-SRU-plus 25 0361690 Mountng kt for proxmty swtch wth fxed cam AS-NHS-F-SRU-plus 25/30 0361695 AS-NHS-F-SRU-plus 25/30-4 0361496 Inductve Proxmty Swtches IN 80-S-M12 0301578 IN 80-S-M8 0301478 IN-C 80-S-M8 0301475 INK 80-S 0301550 INK 80-SL 0301579 Inductve proxmty swtch wth lateral outlet IN 80-S-M12-SA 0301587 IN 80-S-M8-SA 0301483 INK 80-S-SA 0301566 Vew applcable only for versons wthout EDF! 25
SRU-plus 25 Unversal swvel unts Inductve proxmty swtches IN for SRU-plus wth EDF Electronc magnetc swtches MMS End and ntermedate poston montorng mounted drectly Descrpton ID Often combned Inductve Proxmty Swtches IN 80-S-M12 0301578 IN 80-S-M8 0301478 IN-C 80-S-M8 0301475 INK 80-S 0301550 INK 80-SL 0301579 Inductve proxmty swtch wth lateral outlet IN 80-S-M12-SA 0301587 IN 80-S-M8-SA 0301483 INK 80-S-SA 0301566 Cable extenson KV BG12-SG12 3P-0030-PNP 0301999 KV BG12-SG12 3P-0060-PNP 0301998 KV BW08-SG08 3P-0030-PNP 0301495 KV BW08-SG08 3P-0100-PNP 0301496 KV BW08-SG08 3P-0200-PNP 0301497 KV BW12-SG12 3P-0030-PNP 0301595 KV BW12-SG12 3P-0100-PNP 0301596 KV BW12-SG12 3P-0200-PNP 0301597 clp for plug/socket CLI-M12 0301464 CLI-M8 0301463 Connecton cables KA BG08-L 3P-0300-PNP 0301622 KA BG08-L 3P-0500-PNP 0301623 KA BG12-L 3P-0500-PNP 30016369 KA BW08-L 3P-0300-PNP 0301594 KA BW08-L 3P-0500-PNP 0301502 KA BW12-L 3P-0300-PNP 0301503 KA BW12-L 3P-0500-PNP 0301507 Sensor dstrbutor V2-M12 0301776 V2-M8 0301775 V4-M12 0301747 V4-M8 0301746 V8-M12 0301752 V8-M8 0301751 AQ Cable outlet IT Sensor MMS 22.. IK Sensor MMS 22...-SA End and ntermedate poston montorng mounted n C-slot Descrpton ID Often combned Electronc magnetc swtches MMS MMS 22-S-M8-PNP 0301032 MMSK 22-S-PNP 0301034 MMS electronc magnetc swtches wth lateral outlet MMS 22-S-M8-PNP-SA 0301042 MMSK 22-S-PNP-SA 0301044 Cable extenson KV BW08-SG08 3P-0030-PNP 0301495 KV BW08-SG08 3P-0100-PNP 0301496 KV BW08-SG08 3P-0200-PNP 0301497 clp for plug/socket CLI-M8 0301463 Connecton cables KA BG08-L 3P-0300-PNP 0301622 KA BG08-L 3P-0500-PNP 0301623 KA BW08-L 3P-0300-PNP 0301594 KA BW08-L 3P-0500-PNP 0301502 Sensor dstrbutor V2-M8 0301775 V4-M8 0301746 V8-M8 0301751 Two sensors (closer/s) are requred for each unt and extenson cables are avalable as an opton. For sensor cables, note the mnmum permssble bendng rad. These are generally 35 mm. Two sensors (closer/s) are requred for each unt and extenson cables are avalable as an opton. For sensor cables, note the mnmum permssble bendng rad. These are generally 35 mm. 26
SRU-plus 25 Unversal swvel unts Programmable magnetc swtches MMS PI1 AQ Cable outlet IT Sensor MMS 22 PI1-... IK Sensor MMS 22..-PI1-...-SA Poston montorng wth one programmable poston per sensor and electroncs ntegrated n the sensor. Can be programmed usng MT magnetc teachng tool (ncluded n scope of delvery) or ST plug teachng tool (optonal). End poston montorng s mounted n the C-slot. If the ST plug teachng tools are lsted n the table provded, teachng s only possble wth the ST teachng tools. Descrpton ID Often combned Programmable magnetc swtches MMS PI1 MMS 22-PI1-S-M8-PNP 0301160 MMSK 22-PI1-S-PNP 0301162 Programmable magnetc swtches MMS PI1 wth lateral cable outlet MMS 22-PI1-S-M8-PNP-SA 0301166 MMSK 22-PI1-S-PNP-SA 0301168 Programmable magnetc swtches MMS PI1 wth stanless steel housng MMS 22-PI1-S-M8-PNP-HD 0301110 MMSK 22-PI1-S-PNP-HD 0301112 Two sensors (closer/s) are requred for each unt and extenson cables are avalable as an opton. For sensor cables, note the mnmum permssble bendng rad. These are generally 35 mm. 27
SRU-plus 30 Unversal swvel unts Pnon load The ndcated moments and forces are statcal values and should not appear smultaneously Throttlng has to be done for ensurng that the rotary moton takes place wthout mpact or bouncng. otherwse the servce lfe reduces. M y max. 19 Nm F z max. 800 N Techncal data of SRU-plus wthout mddle poston Desgnaton (soft dampng) SRU-plus 30-W-90-3 SRU-plus 30-W-180-3 SRU-plus 30-W-180-90 ID 0361800 0361820 0361850 Descrpton (Hard Dampng) SRU-plus 30-H-90-3 SRU-plus 30-H-180-3 SRU-plus 30-H-180-90 ID 0361900 0361920 0361950 End poston dampng Hydr. damper Hydr. damper Hydr. damper Angle of rotaton [ ] 90.0 180.0 180.0 End poston adjustablty [ ] 3.0 3.0 90.0 Torque [Nm] 9.5 9.5 9.5 Mddle poston none none none Protecton class IP 67 67 67 Weght [kg] 2.40 2.40 2.40 Flud consumpton (2 x nomnal angle) [cm³] 90.0 145.0 145.0 Nomnal operatng pressure [bar] 6.0 6.0 6.0 mn./max. operatng pressure [bar] 4/8 4/8 4/8 Dameter of connectng hose 6 x 3.9 x 1.05 6 x 3.9 x 1.05 6 x 3.9 x 1.05 mn./max. ambent temperature [ C] 5/60 5/60 5/60 Repeat accuracy [ ] 0.05 0.05 0.05 Cleanroom class ISO 14644-1 5 5 5 Optons wth flud feed-through Desgnaton (soft dampng) SRU-plus 30-W-90-3-4 SRU-plus 30-W-180-3-4 SRU-plus 30-W-180-90-4 ID 0361802 0361822 0361852 Descrpton (Hard Dampng) SRU-plus 30-H-90-3-4 SRU-plus 30-H-180-3-4 SRU-plus 30-H-180-90-4 ID 0361902 0361922 0361952 Torque [Nm] 9.0 9.0 9.0 Weght [kg] 2.7 2.7 2.7 No. of flud feed-throughs 4 4 4 max. pressure n the ar feed-through [bar] 8 8 8 Optons wth flud and electrc feed-through Desgnaton (soft dampng) SRU-plus 30-W-90-3-4-M8 SRU-plus 30-W-180-3-4-M8 SRU-plus 30-W-180-90-4-M8 ID 0361804 0361824 0361854 Descrpton (Hard Dampng) SRU-plus 30-H-90-3-4-M8 SRU-plus 30-H-180-3-4-M8 SRU-plus 30-H-180-90-4-M8 ID 0361904 0361924 0361954 Weght [kg] 3.4 3.4 3.4 Number / sze of E-fttngs on the output sde 6/M8 6/M8 6/M8 Number of wres 10 10 10 max. voltage [V] 24 24 24 Max. current per wre / total [A] 1/1 1/1 1/1 Optons wth flud and electrc feed-through and mountng kt Desgnaton (soft dampng) SRU-plus 30-W-90-3-4-M8-AS SRU-plus 30-W-180-3-4-M8-AS SRU-plus 30-W-180-90-4-M8-AS ID 0361807 0361827 0361857 Descrpton (Hard Dampng) SRU-plus 30-H-90-3-4-M8-AS SRU-plus 30-H-180-3-4-M8-AS SRU-plus 30-H-180-90-4-M8-AS ID 0361907 0361927 0361957 28
SRU-plus 30 Unversal swvel unts Max. admssble nerta J Mass moment of nerta Cycles per hour Mass moment of nerta The dagrams are vald for swvel angles of 90 and 180, unts wthout center poston and for applcatons wth a vertcal swvel axs as well as for absolutely centrc loads wth a horzontal rotary axs and wth a pneumatc operatng pressure of 6 bar. The swvelng tmes per throttlng have to be observed, otherwse the lfe tme could reduce. We wll be happy to help you to desgn other cases of applcaton. Swvelng tme Swvelng tme Techncal data of SRU-plus wth mddle poston Desgnaton (soft dampng) SRU-plus 30-W-180-3-M SRU-plus 30-W-180-3-VM SRU-plus 30-W-180-90-M ID 0361830 0361840 0361860 End poston dampng Hydr. damper Hydr. damper Hydr. damper Angle of rotaton [ ] 180.0 180.0 180.0 End poston adjustablty [ ] 3.0 3.0 90.0 Torque [Nm] 9.5 9.5 9.5 Mddle poston 1 x M (pneumatc) 1 x VM (locked) 1 x M (pneumatc) Adjustablty of mddle poston [ ] 3.0 3.0 3.0 Protecton class IP 67 67 67 Weght [kg] 3.20 3.40 3.30 Flud consumpton (2 x nomnal angle) [cm³] 145.0 145.0 145.0 Nomnal operatng pressure [bar] 6.0 6.0 6.0 mn./max. operatng pressure [bar] 4/8 4/6.5 4/8 Dameter of connectng hose 6 x 3.9 x 1.05 6 x 3.9 x 1.05 6 x 3.9 x 1.05 mn./max. ambent temperature [ C] 5/60 5/60 5/60 Repeat accuracy [ ] 0.05 0.05 0.05 Cleanroom class ISO 14644-1 5 5 5 Optons wth flud feed-through Desgnaton (soft dampng) SRU-plus 30-W-180-3-M-4 SRU-plus 30-W-180-3-VM-4 SRU-plus 30-W-180-90-M-4 ID 0361832 0361842 0361862 Torque [Nm] 9.0 9.0 9.0 Weght [kg] 3.5 3.7 3.6 No. of flud feed-throughs 4 4 4 max. pressure n the ar feed-through [bar] 8 8 8 Optons wth flud and electrc feed-through Desgnaton (soft dampng) SRU-plus 30-W-180-3-M-4-M8 SRU-plus 30-W-180-3-VM-4-M8 SRU-plus 30-W-180-90-M-4-M8 ID 0361834 0361844 0361864 Weght [kg] 4.2 4.4 4.3 Number / sze of E-fttngs on the output sde 6/M8 6/M8 6/M8 Number of wres 10 10 10 max. voltage [V] 24 24 24 Max. current per wre / total [A] 1/1 1/1 1/1 Optons wth flud and electrc feed-through and mountng kt Desgnaton (soft dampng) SRU-plus 30-W-180-3-M-4-M8-AS SRU-plus 30-W-180-3-VM-4-M8-AS SRU-plus 30-W-180-90-M-4-M8-AS ID 0361837 0361847 0361867 All modules are also avalable n a Vton verson. Please contact us for detals. 29
SRU-plus 30 Unversal swvel unts Man vew for SRU-plus wthout EDF The man vew shows the SRU-plus n the most basc verson, wth a swvel angle of 180 /90, small end poston adjustablty of 3, wthout a mddle poston, and wthout flud feed-through. The SDV-P pressure mantenance valve can be used to mantan the poston n the case of a loss of pressure (see Accessores catalog secton). A, a Man / drect connecton, swvel unt clockwse turnng B, b Man / drect connecton, swvel unt counterclockwse turnng 1 Connecton swvel unt GL Ft for centerng sleeves GM Ft for centerng pns HT Depth of the centerng sleeve hole n the counter part IT Cover caps IK Not ntended for mountng the unt, only for attachments IL Sensor MMS 22.. 30
SRU-plus 30 Unversal swvel unts Man vew for SRU-plus wth EDF The man vew shows the SRU-plus wth the EDF and flud feed-through n the most basc verson, wth a swvel angle of 180 /90, small end poston adjustablty of 3, and wthout a mddle poston. The SRU-plus swvel unt wth the EDF opton can only be mounted from the bottom. A, a Man / drect connecton, swvel unt clockwse turnng B, b Man / drect connecton, swvel unt counterclockwse turnng 1 Connecton swvel unt 2 Attachment connecton BO Flud feed-through GL Ft for centerng sleeves HT Depth of the centerng sleeve hole n the counter part HM Input for 3 pole sensor feed-through HN Input for 4 pole sensor feed-through HO Sensor feed-through output 31
SRU-plus 30 Unversal swvel unts Hose-free drect connecton M5 Pnon wthout flud feed-through 3 Adapter 4 Rotary unt The drect connecton s used for supplyng compressed ar wthout hoses. Instead, the pressure medum s fed through bore-holes n the mountng plate. 2 Attachment connecton BR Through-hole GL Ft for centerng sleeves GQ Clearance for fttng screw Mountng pattern for fastenng the rotatng load to the pnon. The 4x large threads for 4 screws and 2 counter bores for centerng sleeves opton s preferable to the 4x small threads for 2 screws and 2 shoulder bots (n the deeper counter bores) opton. Pnon wth flud feed-through Large end poston adjustablty 90 2 Attachment connecton BR Through-hole GL Ft for centerng sleeves Pnon screw connecton dagram for the flud feed-through opton. The preferred drllng pattern s 2 x screws and 2 x screws wth centerng sleeve (n ø 8 H7). Vew applcable only for versons wthout EDF! IT Cover caps Dmensonal changes for the opton wth large end poston adjustablty (90 ). Ths permts the end postons to be adjusted by up to 93. More nformaton can be found n the ntroducton to the seres. 32
SRU-plus 30 Unversal swvel unts Pneumatc mddle poston (M) Locked mddle poston (VM) A, a Man / drect connecton, swvel unt clockwse turnng B, b Man / drect connecton, swvel unt counterclockwse turnng C, c Man / drect connecton, mddle poston D, d Man / drect connecton, mddle poston Dmensonal changes for the opton wth the pneumatc mddle poston. Heavy attachments may swng before they reach the fnal poston. The locked mddle poston (VM) can resolve ths. A, a Man / drect connecton, swvel unt clockwse turnng B, b Man / drect connecton, swvel unt counterclockwse turnng C, c Man / drect connecton, mddle poston D, d Man / drect connecton, mddle poston Dmensonal changes wth the locked mddle poston (VM) opton. The mddle poston s locked and s actuated wth the force of the man drve pston. Shock absorbers dampen the travel to the mddle poston and prevent overshootng. Connectons for flud feed-through Adapter plate desgn A, a Man / drect connecton, swvel unt clockwse turnng B, b Man / drect connecton, swvel unt counterclockwse turnng BO Flud feed-through GL Ft for centerng sleeves HT Depth of the centerng sleeve hole n the counter part Suggested here s an adapter plate desgn whch allows for all flud feed-throughs to be accessed as easly as possble. Vew applcable only for versons wthout EDF! Lower mountng plate for the flud feed-through opton. Vacuum, gases or fluds can be fed through. The connecton may be a screw type or a drect connecton. Vew applcable only for versons wthout EDF! 33
SRU-plus 30 Unversal swvel unts Pneumatc dagram of SRU-plus-VM vertcal axs Pneumatc dagram of SRU-plus-VM horzontal axs 0 VM rotary actuators wth a vertcal rotary axs are generally actuated by two 5/3 drectonal control valves wth an exhausted mddle poston. To prevent damage, t s essental to pay attenton to the actuaton sequence ndcated n the operatng manual. VM rotary actuators wth a horzontal or non-vertcal rotary axs must generally be actuated by three 5/3 drectonal control valves wth an exhausted mddle poston. To prevent damage, t s essental to pay attenton to the actuaton sequence ndcated n the operatng manual. Attachment kt for proxmty swtch at SRU-plus wth EDF Dstrbutor for SRU-plus The attachment kt cannot be ordered separately. The SRU-plus wth EDF and attachment kt are delvered as a complete unt by SCHUNK. Please pay attenton to our optons SRU-plus -AS. 3 Adapter BO Flud feed-through FQ Dstrbutor for meda feed-through GL Ft for centerng sleeves The dstrbutor for SRU-plus facltates the use of the flud feed-throughs, both at the drect attachment to the dstrbutor, and n the lnes conveyng the flud nsde the adapter plate. Due to the dstrbutor, only a smple drllng pattern has to be drlled n the adapter plate located between the pnon and the dstrbutor. Descrpton ID Dstrbutor for SRU-plus V-SRU-plus 20/25/30 0357392 Vew applcable only for versons wthout EDF! 34
SRU-plus 30 Unversal swvel unts Attachment kt for proxmty swtch at SRU-plus wthout EDF Inductve proxmty swtches IN for SRU-plus wthout EDF IT AS-NHS-F-SRU-plus 25/30 IK AS-NHS-SRU-plus 30 The attachment kt cannot be ordered separately. The SRU-plus wth EDF and attachment kt are delvered as a complete unt by SCHUNK. Please pay attenton to our optons SRU-plus -AS. Descrpton ID Mountng kt for proxmty swtch wth adjustable cam AS-NHS-SRU-plus 20/25/30-4 0361491 AS-NHS-SRU-plus 20/30 0361490 Mountng kt for proxmty swtch wth fxed cam AS-NHS-F-SRU-plus 25/30 0361695 AS-NHS-F-SRU-plus 25/30-4 0361496 Please note the number of necessary feed-throughs for your swvel unt when selectng the proper attachment kt. AQ Cable outlet IT Sensor IN... IK Sensor IN..-SA End and ntermedate poston montorng can be mounted wth mountng kt Descrpton ID Often combned Mountng kt for proxmty swtch wth adjustable cam AS-NHS-SRU-plus 20/25/30-4 0361491 AS-NHS-SRU-plus 20/30 0361490 Mountng kt for proxmty swtch wth fxed cam AS-NHS-F-SRU-plus 25/30 0361695 AS-NHS-F-SRU-plus 25/30-4 0361496 Inductve Proxmty Swtches IN 80-S-M12 0301578 IN 80-S-M8 0301478 IN-C 80-S-M8 0301475 INK 80-S 0301550 INK 80-SL 0301579 Inductve proxmty swtch wth lateral outlet IN 80-S-M12-SA 0301587 IN 80-S-M8-SA 0301483 INK 80-S-SA 0301566 Vew applcable only for versons wthout EDF! 35
SRU-plus 30 Unversal swvel unts Inductve proxmty swtches IN for SRU-plus wth EDF Electronc magnetc swtches MMS End and ntermedate poston montorng mounted drectly Descrpton ID Often combned Inductve Proxmty Swtches IN 80-S-M12 0301578 IN 80-S-M8 0301478 IN-C 80-S-M8 0301475 INK 80-S 0301550 INK 80-SL 0301579 Inductve proxmty swtch wth lateral outlet IN 80-S-M12-SA 0301587 IN 80-S-M8-SA 0301483 INK 80-S-SA 0301566 Cable extenson KV BG12-SG12 3P-0030-PNP 0301999 KV BG12-SG12 3P-0060-PNP 0301998 KV BW08-SG08 3P-0030-PNP 0301495 KV BW08-SG08 3P-0100-PNP 0301496 KV BW08-SG08 3P-0200-PNP 0301497 KV BW12-SG12 3P-0030-PNP 0301595 KV BW12-SG12 3P-0100-PNP 0301596 KV BW12-SG12 3P-0200-PNP 0301597 clp for plug/socket CLI-M12 0301464 CLI-M8 0301463 Connecton cables KA BG08-L 3P-0300-PNP 0301622 KA BG08-L 3P-0500-PNP 0301623 KA BG12-L 3P-0500-PNP 30016369 KA BW08-L 3P-0300-PNP 0301594 KA BW08-L 3P-0500-PNP 0301502 KA BW12-L 3P-0300-PNP 0301503 KA BW12-L 3P-0500-PNP 0301507 Sensor dstrbutor V2-M12 0301776 V2-M8 0301775 V4-M12 0301747 V4-M8 0301746 V8-M12 0301752 V8-M8 0301751 AQ Cable outlet IT Sensor MMS 22.. IK Sensor MMS 22...-SA End and ntermedate poston montorng mounted n C-slot Descrpton ID Often combned Electronc magnetc swtches MMS MMS 22-S-M8-PNP 0301032 MMSK 22-S-PNP 0301034 MMS electronc magnetc swtches wth lateral outlet MMS 22-S-M8-PNP-SA 0301042 MMSK 22-S-PNP-SA 0301044 Cable extenson KV BW08-SG08 3P-0030-PNP 0301495 KV BW08-SG08 3P-0100-PNP 0301496 KV BW08-SG08 3P-0200-PNP 0301497 clp for plug/socket CLI-M8 0301463 Connecton cables KA BG08-L 3P-0300-PNP 0301622 KA BG08-L 3P-0500-PNP 0301623 KA BW08-L 3P-0300-PNP 0301594 KA BW08-L 3P-0500-PNP 0301502 Sensor dstrbutor V2-M8 0301775 V4-M8 0301746 V8-M8 0301751 Two sensors (closer/s) are requred for each unt and extenson cables are avalable as an opton. For sensor cables, note the mnmum permssble bendng rad. These are generally 35 mm. Two sensors (closer/s) are requred for each unt and extenson cables are avalable as an opton. For sensor cables, note the mnmum permssble bendng rad. These are generally 35 mm. 36
SRU-plus 30 Unversal swvel unts Programmable magnetc swtches MMS PI1 AQ Cable outlet IT Sensor MMS 22 PI1-... IK Sensor MMS 22..-PI1-...-SA Poston montorng wth one programmable poston per sensor and electroncs ntegrated n the sensor. Can be programmed usng MT magnetc teachng tool (ncluded n scope of delvery) or ST plug teachng tool (optonal). End poston montorng s mounted n the C-slot. If the ST plug teachng tools are lsted n the table provded, teachng s only possble wth the ST teachng tools. Descrpton ID Often combned Programmable magnetc swtches MMS PI1 MMS 22-PI1-S-M8-PNP 0301160 MMSK 22-PI1-S-PNP 0301162 Programmable magnetc swtches MMS PI1 wth lateral cable outlet MMS 22-PI1-S-M8-PNP-SA 0301166 MMSK 22-PI1-S-PNP-SA 0301168 Programmable magnetc swtches MMS PI1 wth stanless steel housng MMS 22-PI1-S-M8-PNP-HD 0301110 MMSK 22-PI1-S-PNP-HD 0301112 Two sensors (closer/s) are requred for each unt and extenson cables are avalable as an opton. For sensor cables, note the mnmum permssble bendng rad. These are generally 35 mm. 37
SRU-plus 35 Unversal swvel unts Pnon load The ndcated moments and forces are statcal values and should not appear smultaneously Throttlng has to be done for ensurng that the rotary moton takes place wthout mpact or bouncng. otherwse the servce lfe reduces. M y max. 30.8 Nm F z max. 1500 N Techncal data of SRU-plus wthout mddle poston Desgnaton (soft dampng) SRU-plus 35-W-90-3 SRU-plus 35-W-180-3 SRU-plus 35-W-180-90 ID 0362000 0362020 0362050 End poston dampng Hydr. damper Hydr. damper Hydr. damper Angle of rotaton [ ] 90.0 180.0 180.0 End poston adjustablty [ ] 3.0 3.0 90.0 Torque [Nm] 14.0 14.0 14.0 Mddle poston none none none Protecton class IP 67 67 67 Weght [kg] 2.65 2.65 2.75 Flud consumpton (2 x nomnal angle) [cm³] 132.0 216.0 216.0 Nomnal operatng pressure [bar] 6.0 6.0 6.0 mn./max. operatng pressure [bar] 4/8 4/8 4/8 Dameter of connectng hose 6 x 3.9 x 1.05 6 x 3.9 x 1.05 6 x 3.9 x 1.05 mn./max. ambent temperature [ C] 5/60 5/60 5/60 Repeat accuracy [ ] 0.05 0.05 0.05 Cleanroom class ISO 14644-1 5 5 5 Optons wth flud feed-through Desgnaton (soft dampng) SRU-plus 35-W-90-3-4 SRU-plus 35-W-180-3-4 SRU-plus 35-W-180-90-4 ID 0362002 0362022 0362052 Torque [Nm] 13.4 13.4 13.4 Weght [kg] 2.95 2.95 3.05 No. of flud feed-throughs 4 4 4 max. pressure n the ar feed-through [bar] 8 8 8 Optons wth flud and electrc feed-through Desgnaton (soft dampng) SRU-plus 35-W-90-3-4-M8 SRU-plus 35-W-180-3-4-M8 SRU-plus 35-W-180-90-4-M8 ID 0362004 0362024 0362054 Weght [kg] 3.7 3.7 3.8 Number / sze of E-fttngs on the output sde 6/M8 6/M8 6/M8 Number of wres 10 10 10 max. voltage [V] 24 24 24 Max. current per wre / total [A] 1/1 1/1 1/1 Optons wth flud and electrc feed-through and mountng kt Desgnaton (soft dampng) SRU-plus 35-W-90-3-4-M8-AS SRU-plus 35-W-180-3-4-M8-AS SRU-plus 35-W-180-90-4-M8-AS ID 0362007 0362027 0362057 38
SRU-plus 35 Unversal swvel unts Max. admssble nerta J Mass moment of nerta Cycles per hour The dagrams are vald for swvel angles of 90 and 180, unts wthout center poston and for applcatons wth a vertcal swvel axs as well as for absolutely centrc loads wth a horzontal rotary axs and wth a pneumatc operatng pressure of 6 bar. The swvelng tmes per throttlng have to be observed, otherwse the lfe tme could reduce. We wll be happy to help you to desgn other cases of applcaton. Swvelng tme Techncal data of SRU-plus wth mddle poston Desgnaton (soft dampng) SRU-plus 35-W-180-3-M SRU-plus 35-W-180-3-VM SRU-plus 35-W-180-90-M ID 0362030 0362040 0362060 End poston dampng Hydr. damper Hydr. damper Hydr. damper Angle of rotaton [ ] 180.0 180.0 180.0 End poston adjustablty [ ] 3.0 3.0 90.0 Torque [Nm] 14.0 14.0 14.0 Mddle poston 1 x M (pneumatc) 1 x VM (locked) 1 x M (pneumatc) Adjustablty of mddle poston [ ] 3.0 3.0 3.0 Protecton class IP 67 67 67 Weght [kg] 3.65 4.15 3.75 Flud consumpton (2 x nomnal angle) [cm³] 216.0 216.0 216.0 Nomnal operatng pressure [bar] 6.0 6.0 6.0 mn./max. operatng pressure [bar] 4/8 4/6.5 4/8 Dameter of connectng hose 6 x 3.9 x 1.05 6 x 3.9 x 1.05 6 x 3.9 x 1.05 mn./max. ambent temperature [ C] 5/60 5/60 5/60 Repeat accuracy [ ] 0.05 0.05 0.05 Cleanroom class ISO 14644-1 5 5 5 Optons wth flud feed-through Desgnaton (soft dampng) SRU-plus 35-W-180-3-M-4 SRU-plus 35-W-180-3-VM-4 SRU-plus 35-W-180-90-M-4 ID 0362032 0362042 0362062 Torque [Nm] 13.4 13.4 13.4 Weght [kg] 3.95 4.45 4.05 No. of flud feed-throughs 4 4 4 max. pressure n the ar feed-through [bar] 8 8 8 Optons wth flud and electrc feed-through Desgnaton (soft dampng) SRU-plus 35-W-180-3-M-4-M8 SRU-plus 35-W-180-3-VM-4-M8 SRU-plus 35-W-180-90-M-4-M8 ID 0362034 0362044 0362064 Weght [kg] 4.7 5.2 4.8 Number / sze of E-fttngs on the output sde 6/M8 6/M8 6/M8 Number of wres 10 10 10 max. voltage [V] 24 24 24 Max. current per wre / total [A] 1/1 1/1 1/1 Optons wth flud and electrc feed-through and mountng kt Desgnaton (soft dampng) SRU-plus 35-W-180-3-M-4-M8-AS SRU-plus 35-W-180-3-VM-4-M8-AS SRU-plus 35-W-180-90-M-4-M8-AS ID 0362037 0362047 0362067 All modules are also avalable n a Vton verson. Please contact us for detals. 39
SRU-plus 35 Unversal swvel unts Man vew for SRU-plus wthout EDF The man vew shows the SRU-plus n the most basc verson, wth a swvel angle of 180 /90, small end poston adjustablty of 3, wthout a mddle poston, and wthout flud feed-through. The SDV-P pressure mantenance valve can be used to mantan the poston n the case of a loss of pressure (see Accessores catalog secton). A, a Man / drect connecton, swvel unt clockwse turnng B, b Man / drect connecton, swvel unt counterclockwse turnng 1 Connecton swvel unt GL Ft for centerng sleeves GM Ft for centerng pns HT Depth of the centerng sleeve hole n the counter part IT Cover caps IK Not ntended for mountng the unt, only for attachments IL Sensor MMS 22.. 40
SRU-plus 35 Unversal swvel unts Man vew for SRU-plus wth EDF The man vew shows the SRU-plus wth the EDF and flud feed-through n the most basc verson, wth a swvel angle of 180 /90, small end poston adjustablty of 3, and wthout a mddle poston. The SRU-plus swvel unt wth the EDF opton can only be mounted from the bottom. A, a Man / drect connecton, swvel unt clockwse turnng B, b Man / drect connecton, swvel unt counterclockwse turnng 1 Connecton swvel unt 2 Attachment connecton BO Flud feed-through GL Ft for centerng sleeves HT Depth of the centerng sleeve hole n the counter part HM Input for 3 pole sensor feed-through HN Input for 4 pole sensor feed-through HO Sensor feed-through output 41
SRU-plus 35 Unversal swvel unts Hose-free drect connecton M5 Pnon wthout flud feed-through 3 Adapter 4 Rotary unt The drect connecton s used for supplyng compressed ar wthout hoses. Instead, the pressure medum s fed through bore-holes n the mountng plate. 2 Attachment connecton BR Through-hole GL Ft for centerng sleeves GQ Clearance for fttng screw Mountng pattern for fastenng the rotatng load to the pnon. The 4x large threads for 4 screws and 2 counter bores for centerng sleeves opton s preferable to the 4x small threads for 2 screws and 2 shoulder bots (n the deeper counter bores) opton. Pnon wth flud feed-through Large end poston adjustablty 90 2 Attachment connecton BR Through-hole GL Ft for centerng sleeves GQ Clearance for fttng screw Mountng pattern for fastenng the rotatng load to the pnon. The 4x large threads for 4 screws and 2 counter bores for centerng sleeves opton s preferable to the 4x small threads for 2 screws and 2 shoulder bots (n the deeper counter bores) opton. Vew applcable only for versons wthout EDF! IT Cover caps Dmensonal changes for the opton wth large end poston adjustablty (90 ). Ths permts the end postons to be adjusted by up to 93. More nformaton can be found n the ntroducton to the seres. 42
SRU-plus 35 Unversal swvel unts Pneumatc mddle poston (M) Locked mddle poston (VM) A, a Man / drect connecton, swvel unt clockwse turnng B, b Man / drect connecton, swvel unt counterclockwse turnng C, c Man / drect connecton, mddle poston D, d Man / drect connecton, mddle poston Dmensonal changes for the opton wth the pneumatc mddle poston. Heavy attachments may swng before they reach the fnal poston. The locked mddle poston (VM) can resolve ths. A, a Man / drect connecton, swvel unt clockwse turnng B, b Man / drect connecton, swvel unt counterclockwse turnng C, c Man / drect connecton, mddle poston D, d Man / drect connecton, mddle poston Dmensonal changes wth the locked mddle poston (VM) opton. The mddle poston s locked and s actuated wth the force of the man drve pston. Shock absorbers dampen the travel to the mddle poston and prevent overshootng. Connectons for flud feed-through Adapter plate desgn A, a Man / drect connecton, swvel unt clockwse turnng B, b Man / drect connecton, swvel unt counterclockwse turnng BO Flud feed-through GL Ft for centerng sleeves HT Depth of the centerng sleeve hole n the counter part Suggested here s an adapter plate desgn whch allows for all flud feed-throughs to be accessed as easly as possble. Vew applcable only for versons wthout EDF! Lower mountng plate for the flud feed-through opton. Vacuum, gases or fluds can be fed through. The connecton may be a screw type or a drect connecton. Vew applcable only for versons wthout EDF! 43
SRU-plus 35 Unversal swvel unts Pneumatc dagram of SRU-plus-VM vertcal axs Pneumatc dagram of SRU-plus-VM horzontal axs 0 VM rotary actuators wth a vertcal rotary axs are generally actuated by two 5/3 drectonal control valves wth an exhausted mddle poston. To prevent damage, t s essental to pay attenton to the actuaton sequence ndcated n the operatng manual. VM rotary actuators wth a horzontal or non-vertcal rotary axs must generally be actuated by three 5/3 drectonal control valves wth an exhausted mddle poston. To prevent damage, t s essental to pay attenton to the actuaton sequence ndcated n the operatng manual. Attachment kt for proxmty swtch at SRU-plus wth EDF Dstrbutor for SRU-plus The attachment kt cannot be ordered separately. The SRU-plus wth EDF and attachment kt are delvered as a complete unt by SCHUNK. Please pay attenton to our optons SRU-plus -AS. 3 Adapter BO Flud feed-through FQ Dstrbutor for meda feed-through GL Ft for centerng sleeves The dstrbutor for SRU-plus facltates the use of the flud feed-throughs, both at the drect attachment to the dstrbutor, and n the lnes conveyng the flud nsde the adapter plate. Due to the dstrbutor, only a smple drllng pattern has to be drlled n the adapter plate located between the pnon and the dstrbutor. Descrpton ID Dstrbutor for SRU-plus V-SRU-plus 35 0357792 Vew applcable only for versons wthout EDF! 44
SRU-plus 35 Unversal swvel unts Attachment kt for proxmty swtch at SRU-plus wthout EDF Inductve proxmty swtches IN for SRU-plus wthout EDF IT AS-NHS-F-SRU-plus 35 IK AS-NHS-SRU-plus 35 The attachment kt cannot be ordered separately. The SRU-plus wth EDF and attachment kt are delvered as a complete unt by SCHUNK. Please pay attenton to our optons SRU-plus -AS. Descrpton ID Mountng kt for proxmty swtch wth adjustable cam AS-NHS-SRU-plus 35 0362090 AS-NHS-SRU-plus 35-4 0362091 Mountng kt for proxmty swtch wth fxed cam AS-NHS-F-SRU-plus 35 0362095 AS-NHS-F-SRU-plus 35-4 0362096 Please note the number of necessary feed-throughs for your swvel unt when selectng the proper attachment kt. AQ Cable outlet IT Sensor IN... IK Sensor IN..-SA End and ntermedate poston montorng can be mounted wth mountng kt Descrpton ID Often combned Mountng kt for proxmty swtch wth adjustable cam AS-NHS-SRU-plus 35 0362090 AS-NHS-SRU-plus 35-4 0362091 Mountng kt for proxmty swtch wth fxed cam AS-NHS-F-SRU-plus 35 0362095 AS-NHS-F-SRU-plus 35-4 0362096 Inductve Proxmty Swtches IN 80-S-M12 0301578 IN 80-S-M8 0301478 IN-C 80-S-M8 0301475 INK 80-S 0301550 INK 80-SL 0301579 Inductve proxmty swtch wth lateral outlet IN 80-S-M12-SA 0301587 IN 80-S-M8-SA 0301483 INK 80-S-SA 0301566 Vew applcable only for versons wthout EDF! 45
SRU-plus 35 Unversal swvel unts Inductve proxmty swtches IN for SRU-plus wth EDF Electronc magnetc swtches MMS End and ntermedate poston montorng mounted drectly Descrpton ID Often combned Inductve Proxmty Swtches IN 80-S-M12 0301578 IN 80-S-M8 0301478 IN-C 80-S-M8 0301475 INK 80-S 0301550 INK 80-SL 0301579 Inductve proxmty swtch wth lateral outlet IN 80-S-M12-SA 0301587 IN 80-S-M8-SA 0301483 INK 80-S-SA 0301566 Cable extenson KV BG12-SG12 3P-0030-PNP 0301999 KV BG12-SG12 3P-0060-PNP 0301998 KV BW08-SG08 3P-0030-PNP 0301495 KV BW08-SG08 3P-0100-PNP 0301496 KV BW08-SG08 3P-0200-PNP 0301497 KV BW12-SG12 3P-0030-PNP 0301595 KV BW12-SG12 3P-0100-PNP 0301596 KV BW12-SG12 3P-0200-PNP 0301597 clp for plug/socket CLI-M12 0301464 CLI-M8 0301463 Connecton cables KA BG08-L 3P-0300-PNP 0301622 KA BG08-L 3P-0500-PNP 0301623 KA BG12-L 3P-0500-PNP 30016369 KA BW08-L 3P-0300-PNP 0301594 KA BW08-L 3P-0500-PNP 0301502 KA BW12-L 3P-0300-PNP 0301503 KA BW12-L 3P-0500-PNP 0301507 Sensor dstrbutor V2-M12 0301776 V2-M8 0301775 V4-M12 0301747 V4-M8 0301746 V8-M12 0301752 V8-M8 0301751 AQ Cable outlet IT Sensor MMS 22.. IK Sensor MMS 22...-SA End and ntermedate poston montorng mounted n C-slot Descrpton ID Often combned Electronc magnetc swtches MMS MMS 22-S-M8-PNP 0301032 MMSK 22-S-PNP 0301034 MMS electronc magnetc swtches wth lateral outlet MMS 22-S-M8-PNP-SA 0301042 MMSK 22-S-PNP-SA 0301044 Cable extenson KV BW08-SG08 3P-0030-PNP 0301495 KV BW08-SG08 3P-0100-PNP 0301496 KV BW08-SG08 3P-0200-PNP 0301497 clp for plug/socket CLI-M8 0301463 Connecton cables KA BG08-L 3P-0300-PNP 0301622 KA BG08-L 3P-0500-PNP 0301623 KA BW08-L 3P-0300-PNP 0301594 KA BW08-L 3P-0500-PNP 0301502 Sensor dstrbutor V2-M8 0301775 V4-M8 0301746 V8-M8 0301751 Two sensors (closer/s) are requred for each unt and extenson cables are avalable as an opton. For sensor cables, note the mnmum permssble bendng rad. These are generally 35 mm. Two sensors (closer/s) are requred for each unt and extenson cables are avalable as an opton. For sensor cables, note the mnmum permssble bendng rad. These are generally 35 mm. 46
SRU-plus 35 Unversal swvel unts Programmable magnetc swtches MMS PI1 AQ Cable outlet IT Sensor MMS 22 PI1-... IK Sensor MMS 22..-PI1-...-SA Poston montorng wth one programmable poston per sensor and electroncs ntegrated n the sensor. Can be programmed usng MT magnetc teachng tool (ncluded n scope of delvery) or ST plug teachng tool (optonal). End poston montorng s mounted n the C-slot. If the ST plug teachng tools are lsted n the table provded, teachng s only possble wth the ST teachng tools. Descrpton ID Often combned Programmable magnetc swtches MMS PI1 MMS 22-PI1-S-M8-PNP 0301160 MMSK 22-PI1-S-PNP 0301162 Programmable magnetc swtches MMS PI1 wth lateral cable outlet MMS 22-PI1-S-M8-PNP-SA 0301166 MMSK 22-PI1-S-PNP-SA 0301168 Programmable magnetc swtches MMS PI1 wth stanless steel housng MMS 22-PI1-S-M8-PNP-HD 0301110 MMSK 22-PI1-S-PNP-HD 0301112 Two sensors (closer/s) are requred for each unt and extenson cables are avalable as an opton. For sensor cables, note the mnmum permssble bendng rad. These are generally 35 mm. 47
SRU-plus 40 Unversal swvel unts Pnon load The ndcated moments and forces are statcal values and should not appear smultaneously Throttlng has to be done for ensurng that the rotary moton takes place wthout mpact or bouncng. otherwse the servce lfe reduces. M y max. 68 Nm F z max. 2900 N Techncal data of SRU-plus wthout mddle poston Desgnaton (soft dampng) SRU-plus 40-W-90-3 SRU-plus 40-W-180-3 SRU-plus 40-W-180-90 ID 0362200 0362220 0362250 Descrpton (Hard Dampng) SRU-plus 40-H-90-3 SRU-plus 40-H-180-3 SRU-plus 40-H-180-90 ID 0362300 0362320 0362350 End poston dampng Hydr. damper Hydr. damper Hydr. damper Angle of rotaton [ ] 90.0 180.0 180.0 End poston adjustablty [ ] 3.0 3.0 90.0 Torque [Nm] 20.0 20.0 20.0 Mddle poston none none none Protecton class IP 67 67 67 Weght [kg] 4.20 4.20 4.30 Flud consumpton (2 x nomnal angle) [cm³] 208.0 336.0 336.0 Nomnal operatng pressure [bar] 6.0 6.0 6.0 mn./max. operatng pressure [bar] 4/8 4/8 4/8 Dameter of connectng hose 8 x 6 x 1 8 x 6 x 1 8 x 6 x 1 mn./max. ambent temperature [ C] 5/60 5/60 5/60 Repeat accuracy [ ] 0.05 0.05 0.05 Cleanroom class ISO 14644-1 5 5 5 Optons wth flud feed-through Desgnaton (soft dampng) SRU-plus 40-W-90-3-8 SRU-plus 40-W-180-3-8 SRU-plus 40-W-180-90-8 ID 0362202 0362222 0362252 Descrpton (Hard Dampng) SRU-plus 40-H-90-3-8 SRU-plus 40-H-180-3-8 SRU-plus 40-H-180-90-8 ID 0362302 0362322 0362352 Torque [Nm] 19.2 19.2 19.2 Weght [kg] 4.9 4.9 5 No. of flud feed-throughs 8 8 8 max. pressure n the ar feed-through [bar] 8 8 8 Optons wth flud and electrc feed-through Desgnaton (soft dampng) SRU-plus 40-W-90-3-8-M8 SRU-plus 40-W-180-3-8-M8 SRU-plus 40-W-180-90-8-M8 ID 0362204 0362224 0362254 Descrpton (Hard Dampng) SRU-plus 40-H-90-3-8-M8 SRU-plus 40-H-180-3-8-M8 SRU-plus 40-H-180-90-8-M8 ID 0362304 0362324 0362354 Weght [kg] 6.45 6.45 6.55 Number / sze of E-fttngs on the output sde 9/M8 9/M8 9/M8 Number of wres 10 10 10 max. voltage [V] 24 24 24 Max. current per wre / total [A] 1/1 1/1 1/1 Optons wth flud and electrc feed-through and mountng kt Desgnaton (soft dampng) SRU-plus 40-W-90-3-8-M8-AS SRU-plus 40-W-180-3-8-M8-AS SRU-plus 40-W-180-90-8-M8-AS ID 0362207 0362227 0362257 Descrpton (Hard Dampng) SRU-plus 40-H-90-3-8-M8-AS SRU-plus 40-H-180-3-8-M8-AS SRU-plus 40-H-180-90-8-M8-AS ID 0362307 0362327 0362357 48
SRU-plus 40 Unversal swvel unts Max. admssble nerta J Mass moment of nerta Cycles per hour Mass moment of nerta The dagrams are vald for swvel angles of 90 and 180, unts wthout center poston and for applcatons wth a vertcal swvel axs as well as for absolutely centrc loads wth a horzontal rotary axs and wth a pneumatc operatng pressure of 6 bar. The swvelng tmes per throttlng have to be observed, otherwse the lfe tme could reduce. We wll be happy to help you to desgn other cases of applcaton. Swvelng tme Swvelng tme Techncal data of SRU-plus wth mddle poston Desgnaton (soft dampng) SRU-plus 40-W-180-3-M SRU-plus 40-W-180-3-VM SRU-plus 40-W-180-90-M ID 0362230 0362240 0362260 End poston dampng Hydr. damper Hydr. damper Hydr. damper Angle of rotaton [ ] 180.0 180.0 180.0 End poston adjustablty [ ] 3.0 3.0 90.0 Torque [Nm] 20.0 20.0 20.0 Mddle poston 1 x M (pneumatc) 1 x VM (locked) 1 x M (pneumatc) Adjustablty of mddle poston [ ] 3.0 3.0 3.0 Protecton class IP 67 67 67 Weght [kg] 5.50 6.50 5.70 Flud consumpton (2 x nomnal angle) [cm³] 336.0 336.0 336.0 Nomnal operatng pressure [bar] 6.0 6.0 6.0 mn./max. operatng pressure [bar] 4/8 4/6.5 4/8 Dameter of connectng hose 8 x 6 x 1 8 x 6 x 1 8 x 6 x 1 mn./max. ambent temperature [ C] 5/60 5/60 5/60 Repeat accuracy [ ] 0.05 0.05 0.05 Cleanroom class ISO 14644-1 5 5 5 Optons wth flud feed-through Desgnaton (soft dampng) SRU-plus 40-W-180-3-M-8 SRU-plus 40-W-180-3-VM-8 SRU-plus 40-W-180-90-M-8 ID 0362232 0362242 0362262 Torque [Nm] 19.2 19.2 19.2 Weght [kg] 6.2 7.2 6.4 No. of flud feed-throughs 8 8 8 max. pressure n the ar feed-through [bar] 8 8 8 Optons wth flud and electrc feed-through Desgnaton (soft dampng) SRU-plus 40-W-180-3-M-8-M8 SRU-plus 40-W-180-3-VM-8-M8 SRU-plus 40-W-180-90-M-8-M8 ID 0362234 0362244 0362264 Weght [kg] 7.75 8.75 7.95 Number / sze of E-fttngs on the output sde 9/M8 9/M8 9/M8 Number of wres 10 10 10 max. voltage [V] 24 24 24 Max. current per wre / total [A] 1/1 1/1 1/1 Optons wth flud and electrc feed-through and mountng kt Desgnaton (soft dampng) SRU-plus 40-W-180-3-M-8-M8-AS SRU-plus 40-W-180-3-VM-8-M8-AS SRU-plus 40-W-180-90-M-8-M8-AS ID 0362237 0362247 0362267 All modules are also avalable n a Vton verson. Please contact us for detals. 49
SRU-plus 40 Unversal swvel unts Man vew for SRU-plus wthout EDF The man vew shows the SRU-plus n the most basc verson, wth a swvel angle of 180 /90, small end poston adjustablty of 3, wthout a mddle poston, and wthout flud feed-through. The SDV-P pressure mantenance valve can be used to mantan the poston n the case of a loss of pressure (see Accessores catalog secton). A, a Man / drect connecton, swvel unt clockwse turnng B, b Man / drect connecton, swvel unt counterclockwse turnng 1 Connecton swvel unt GL Ft for centerng sleeves GM Ft for centerng pns HT Depth of the centerng sleeve hole n the counter part IT Cover caps IK Not ntended for mountng the unt, only for attachments IL Sensor MMS 22.. 50
SRU-plus 40 Unversal swvel unts Man vew for SRU-plus wth EDF The man vew shows the SRU-plus wth the EDF and flud feed-through n the most basc verson, wth a swvel angle of 180 /90, small end poston adjustablty of 3, and wthout a mddle poston. The SRU-plus swvel unt wth the EDF opton can only be mounted from the bottom. A, a Man / drect connecton, swvel unt clockwse turnng B, b Man / drect connecton, swvel unt counterclockwse turnng 1 Connecton swvel unt 2 Attachment connecton BO Flud feed-through GL Ft for centerng sleeves HT Depth of the centerng sleeve hole n the counter part HM Input for 3 pole sensor feed-through HN Input for 4 pole sensor feed-through HO Sensor feed-through output 51
SRU-plus 40 Unversal swvel unts Hose-free drect connecton M5 Pnon wthout flud feed-through 3 Adapter 4 Rotary unt The drect connecton s used for supplyng compressed ar wthout hoses. Instead, the pressure medum s fed through bore-holes n the mountng plate. 2 Attachment connecton BR Through-hole GL Ft for centerng sleeves GQ Clearance for fttng screw Mountng pattern for fastenng the rotatng load to the pnon. The 4x large threads for 4 screws and 2 counter bores for centerng sleeves opton s preferable to the 4x small threads for 2 screws and 2 shoulder bots (n the deeper counter bores) opton. Pnon wth flud feed-through Large end poston adjustablty 90 2 Attachment connecton BR Through-hole GL Ft for centerng sleeves GQ Clearance for fttng screw Mountng pattern for fastenng the rotatng load to the pnon. The 4x large threads for 4 screws and 2 counter bores for centerng sleeves opton s preferable to the 4x small threads for 2 screws and 2 shoulder bots (n the deeper counter bores) opton. Vew applcable only for versons wthout EDF! IT Cover caps Dmensonal changes for the opton wth large end poston adjustablty (90 ). Ths permts the end postons to be adjusted by up to 93. More nformaton can be found n the ntroducton to the seres. 52
SRU-plus 40 Unversal swvel unts Pneumatc mddle poston (M) Locked mddle poston (VM) A, a Man / drect connecton, swvel unt clockwse turnng B, b Man / drect connecton, swvel unt counterclockwse turnng C, c Man / drect connecton, mddle poston D, d Man / drect connecton, mddle poston Dmensonal changes for the opton wth the pneumatc mddle poston. Heavy attachments may swng before they reach the fnal poston. The locked mddle poston (VM) can resolve ths. A, a Man / drect connecton, swvel unt clockwse turnng B, b Man / drect connecton, swvel unt counterclockwse turnng C, c Man / drect connecton, mddle poston D, d Man / drect connecton, mddle poston Dmensonal changes wth the locked mddle poston (VM) opton. The mddle poston s locked and s actuated wth the force of the man drve pston. Shock absorbers dampen the travel to the mddle poston and prevent overshootng. Connectons for flud feed-through Adapter plate desgn A, a Man / drect connecton, swvel unt clockwse turnng B, b Man / drect connecton, swvel unt counterclockwse turnng BO Flud feed-through GL Ft for centerng sleeves HT Depth of the centerng sleeve hole n the counter part Suggested here s an adapter plate desgn whch allows for all flud feed-throughs to be accessed as easly as possble. Vew applcable only for versons wthout EDF! Lower mountng plate for the flud feed-through opton. Vacuum, gases or fluds can be fed through. The connecton may be a screw type or a drect connecton. Vew applcable only for versons wthout EDF! 53
SRU-plus 40 Unversal swvel unts Pneumatc dagram of SRU-plus-VM vertcal axs Pneumatc dagram of SRU-plus-VM horzontal axs 0 VM rotary actuators wth a vertcal rotary axs are generally actuated by two 5/3 drectonal control valves wth an exhausted mddle poston. To prevent damage, t s essental to pay attenton to the actuaton sequence ndcated n the operatng manual. VM rotary actuators wth a horzontal or non-vertcal rotary axs must generally be actuated by three 5/3 drectonal control valves wth an exhausted mddle poston. To prevent damage, t s essental to pay attenton to the actuaton sequence ndcated n the operatng manual. Attachment kt for proxmty swtch at SRU-plus wth EDF Dstrbutor for SRU-plus The attachment kt cannot be ordered separately. The SRU-plus wth EDF and attachment kt are delvered as a complete unt by SCHUNK. Please pay attenton to our optons SRU-plus -AS. 3 Adapter BO Flud feed-through FQ Dstrbutor for meda feed-through GL Ft for centerng sleeves The dstrbutor for SRU-plus facltates the use of the flud feed-throughs, both at the drect attachment to the dstrbutor, and n the lnes conveyng the flud nsde the adapter plate. Due to the dstrbutor, only a smple drllng pattern has to be drlled n the adapter plate located between the pnon and the dstrbutor. Descrpton ID Dstrbutor for SRU-plus V-SRU-plus 40 0357992 Vew applcable only for versons wthout EDF! 54
SRU-plus 40 Unversal swvel unts Attachment kt for proxmty swtch at SRU-plus wthout EDF Inductve proxmty swtches IN for SRU-plus wthout EDF IT AS-NHS-F-SRU-plus 40 IK AS-NHS-SRU-plus 40 The sze-specfc attachment kt s requred for nstallng the nductve proxmty swtches. Up to three proxmty swtches (2x end poston, 1x mddle poston) can be attached usng the attachment kt. Descrpton ID Mountng kt for proxmty swtch wth adjustable cam AS-NHS-SRU-plus 40 0362290 AS-NHS-SRU-plus 40-8 0362291 Mountng kt for proxmty swtch wth fxed cam AS-NHS-F-SRU-plus 40 0362295 AS-NHS-F-SRU-plus 40-8 0362296 Please note the number of necessary feed-throughs for your swvel unt when selectng the proper attachment kt. AQ Cable outlet IT Sensor IN... IK Sensor IN..-SA End and ntermedate poston montorng can be mounted wth mountng kt Descrpton ID Often combned Mountng kt for proxmty swtch wth adjustable cam AS-NHS-SRU-plus 40 0362290 AS-NHS-SRU-plus 40-8 0362291 Mountng kt for proxmty swtch wth fxed cam AS-NHS-F-SRU-plus 40 0362295 AS-NHS-F-SRU-plus 40-8 0362296 Inductve Proxmty Swtches IN 80-S-M12 0301578 IN 80-S-M8 0301478 IN-C 80-S-M8 0301475 INK 80-S 0301550 INK 80-SL 0301579 Inductve proxmty swtch wth lateral outlet IN 80-S-M12-SA 0301587 IN 80-S-M8-SA 0301483 INK 80-S-SA 0301566 Vew applcable only for versons wthout EDF! 55
SRU-plus 40 Unversal swvel unts Inductve proxmty swtches IN for SRU-plus wth EDF Electronc magnetc swtches MMS End and ntermedate poston montorng mounted drectly Descrpton ID Often combned Inductve Proxmty Swtches IN 80-S-M12 0301578 IN 80-S-M8 0301478 IN-C 80-S-M8 0301475 INK 80-S 0301550 INK 80-SL 0301579 Inductve proxmty swtch wth lateral outlet IN 80-S-M12-SA 0301587 IN 80-S-M8-SA 0301483 INK 80-S-SA 0301566 Cable extenson KV BG12-SG12 3P-0030-PNP 0301999 KV BG12-SG12 3P-0060-PNP 0301998 KV BW08-SG08 3P-0030-PNP 0301495 KV BW08-SG08 3P-0100-PNP 0301496 KV BW08-SG08 3P-0200-PNP 0301497 KV BW12-SG12 3P-0030-PNP 0301595 KV BW12-SG12 3P-0100-PNP 0301596 KV BW12-SG12 3P-0200-PNP 0301597 clp for plug/socket CLI-M12 0301464 CLI-M8 0301463 Connecton cables KA BG08-L 3P-0300-PNP 0301622 KA BG08-L 3P-0500-PNP 0301623 KA BG12-L 3P-0500-PNP 30016369 KA BW08-L 3P-0300-PNP 0301594 KA BW08-L 3P-0500-PNP 0301502 KA BW12-L 3P-0300-PNP 0301503 KA BW12-L 3P-0500-PNP 0301507 Sensor dstrbutor V2-M12 0301776 V2-M8 0301775 V4-M12 0301747 V4-M8 0301746 V8-M12 0301752 V8-M8 0301751 AQ Cable outlet IT Sensor MMS 22.. IK Sensor MMS 22...-SA End and ntermedate poston montorng mounted n C-slot Descrpton ID Often combned Electronc magnetc swtches MMS MMS 22-S-M8-PNP 0301032 MMSK 22-S-PNP 0301034 MMS electronc magnetc swtches wth lateral outlet MMS 22-S-M8-PNP-SA 0301042 MMSK 22-S-PNP-SA 0301044 Cable extenson KV BW08-SG08 3P-0030-PNP 0301495 KV BW08-SG08 3P-0100-PNP 0301496 KV BW08-SG08 3P-0200-PNP 0301497 clp for plug/socket CLI-M8 0301463 Connecton cables KA BG08-L 3P-0300-PNP 0301622 KA BG08-L 3P-0500-PNP 0301623 KA BW08-L 3P-0300-PNP 0301594 KA BW08-L 3P-0500-PNP 0301502 Sensor dstrbutor V2-M8 0301775 V4-M8 0301746 V8-M8 0301751 Two sensors (closer/s) are requred for each unt and extenson cables are avalable as an opton. For sensor cables, note the mnmum permssble bendng rad. These are generally 35 mm. Two sensors (closer/s) are requred for each unt and extenson cables are avalable as an opton. For sensor cables, note the mnmum permssble bendng rad. These are generally 35 mm. 56
SRU-plus 40 Unversal swvel unts Programmable magnetc swtches MMS PI1 AQ Cable outlet IT Sensor MMS 22 PI1-... IK Sensor MMS 22..-PI1-...-SA Poston montorng wth one programmable poston per sensor and electroncs ntegrated n the sensor. Can be programmed usng MT magnetc teachng tool (ncluded n scope of delvery) or ST plug teachng tool (optonal). End poston montorng s mounted n the C-slot. If the ST plug teachng tools are lsted n the table provded, teachng s only possble wth the ST teachng tools. Descrpton ID Often combned Programmable magnetc swtches MMS PI1 MMS 22-PI1-S-M8-PNP 0301160 MMSK 22-PI1-S-PNP 0301162 Programmable magnetc swtches MMS PI1 wth lateral cable outlet MMS 22-PI1-S-M8-PNP-SA 0301166 MMSK 22-PI1-S-PNP-SA 0301168 Programmable magnetc swtches MMS PI1 wth stanless steel housng MMS 22-PI1-S-M8-PNP-HD 0301110 MMSK 22-PI1-S-PNP-HD 0301112 Two sensors (closer/s) are requred for each unt and extenson cables are avalable as an opton. For sensor cables, note the mnmum permssble bendng rad. These are generally 35 mm. 57
SRU-plus 50 Unversal swvel unts Pnon load The ndcated moments and forces are statcal values and should not appear smultaneously Throttlng has to be done for ensurng that the rotary moton takes place wthout mpact or bouncng. otherwse the servce lfe reduces. M y max. 340 Nm F z max. 9000 N Techncal data of SRU-plus wthout mddle poston Desgnaton (soft dampng) SRU-plus 50-W-90-3 SRU-plus 50-W-180-3 SRU-plus 50-W-180-90 ID 0362600 0362620 0362650 Descrpton (Hard Dampng) SRU-plus 50-H-90-3 SRU-plus 50-H-180-3 SRU-plus 50-H-180-90 ID 0362700 0362720 0362750 End poston dampng Hydr. damper Hydr. damper Hydr. damper Angle of rotaton [ ] 90.0 180.0 180.0 End poston adjustablty [ ] 3.0 3.0 90.0 Torque [Nm] 52.0 52.0 52.0 Mddle poston none none none Protecton class IP 67 67 67 Weght [kg] 9.40 9.40 9.80 Flud consumpton (2 x nomnal angle) [cm³] 448.0 776.0 776.0 Nomnal operatng pressure [bar] 6.0 6.0 6.0 mn./max. operatng pressure [bar] 4/8 4/8 4/8 Dameter of connectng hose 8 x 6 x 1 8 x 6 x 1 8 x 6 x 1 mn./max. ambent temperature [ C] 5/60 5/60 5/60 Repeat accuracy [ ] 0.05 0.05 0.05 Cleanroom class ISO 14644-1 5 5 5 Optons wth flud feed-through Desgnaton (soft dampng) SRU-plus 50-W-90-3-8 SRU-plus 50-W-180-3-8 SRU-plus 50-W-180-90-8 ID 0362602 0362622 0362652 Descrpton (Hard Dampng) SRU-plus 50-H-90-3-8 SRU-plus 50-H-180-3-8 SRU-plus 50-H-180-90-8 ID 0362702 0362722 0362752 Torque [Nm] 50.3 50.3 50.3 Weght [kg] 9.6 9.6 10 No. of flud feed-throughs 8 8 8 max. pressure n the ar feed-through [bar] 8 8 8 Optons wth flud and electrc feed-through Desgnaton (soft dampng) SRU-plus 50-W-90-3-8-M8 SRU-plus 50-W-180-3-8-M8 SRU-plus 50-W-180-90-8-M8 ID 0362604 0362624 0362654 Descrpton (Hard Dampng) SRU-plus 50-H-90-3-8-M8 SRU-plus 50-H-180-3-8-M8 SRU-plus 50-H-180-90-8-M8 ID 0362704 0362724 0362754 Weght [kg] 11.55 11.55 11.95 Number / sze of E-fttngs on the output sde 9/M8 9/M8 9/M8 Number of wres 10 10 10 max. voltage [V] 24 24 24 Max. current per wre / total [A] 1/1 1/1 1/1 Optons wth flud and electrc feed-through and mountng kt Desgnaton (soft dampng) SRU-plus 50-W-90-3-8-M8-AS SRU-plus 50-W-180-3-8-M8-AS SRU-plus 50-W-180-90-8-M8-AS ID 0362607 0362627 0362657 Descrpton (Hard Dampng) SRU-plus 50-H-90-3-8-M8-AS SRU-plus 50-H-180-3-8-M8-AS SRU-plus 50-H-180-90-8-M8-AS ID 0362707 0362727 0362757 58
SRU-plus 50 Unversal swvel unts Max. admssble nerta J Mass moment of nerta Cycles per hour Mass moment of nerta The dagrams are vald for swvel angles of 90 and 180, unts wthout center poston and for applcatons wth a vertcal swvel axs as well as for absolutely centrc loads wth a horzontal rotary axs and wth a pneumatc operatng pressure of 6 bar. The swvelng tmes per throttlng have to be observed, otherwse the lfe tme could reduce. We wll be happy to help you to desgn other cases of applcaton. Swvelng tme Swvelng tme Techncal data of SRU-plus wth mddle poston Desgnaton (soft dampng) SRU-plus 50-W-180-3-M SRU-plus 50-W-180-3-VM SRU-plus 50-W-180-90-M ID 0362630 0362640 0362660 End poston dampng Hydr. damper Hydr. damper Hydr. damper Angle of rotaton [ ] 180.0 180.0 180.0 End poston adjustablty [ ] 3.0 3.0 90.0 Torque [Nm] 52.0 52.0 52.0 Mddle poston 1 x M (pneumatc) 1 x VM (locked) 1 x M (pneumatc) Adjustablty of mddle poston [ ] 3.0 3.0 3.0 Protecton class IP 67 67 67 Weght [kg] 12.20 12.80 12.60 Flud consumpton (2 x nomnal angle) [cm³] 776.0 776.0 776.0 Nomnal operatng pressure [bar] 6.0 6.0 6.0 mn./max. operatng pressure [bar] 4/8 4/6.5 4/8 Dameter of connectng hose 8 x 6 x 1 8 x 6 x 1 8 x 6 x 1 mn./max. ambent temperature [ C] 5/60 5/60 5/60 Repeat accuracy [ ] 0.05 0.05 0.05 Cleanroom class ISO 14644-1 5 5 5 Optons wth flud feed-through Desgnaton (soft dampng) SRU-plus 50-W-180-3-M-8 SRU-plus 50-W-180-3-VM-8 SRU-plus 50-W-180-90-M-8 ID 0362632 0362642 0362662 Torque [Nm] 50.3 50.3 50.3 Weght [kg] 12.4 13 12.8 No. of flud feed-throughs 8 8 8 max. pressure n the ar feed-through [bar] 8 8 8 Optons wth flud and electrc feed-through Desgnaton (soft dampng) SRU-plus 50-W-180-3-M-8-M8 SRU-plus 50-W-180-3-VM-8-M8 SRU-plus 50-W-180-90-M-8-M8 ID 0362634 0362644 0362664 Weght [kg] 14.35 14.95 14.75 Number / sze of E-fttngs on the output sde 9/M8 9/M8 9/M8 Number of wres 10 10 10 max. voltage [V] 24 24 24 Max. current per wre / total [A] 1/1 1/1 1/1 Optons wth flud and electrc feed-through and mountng kt Desgnaton (soft dampng) SRU-plus 50-W-180-3-M-8-M8-AS SRU-plus 50-W-180-3-VM-8-M8-AS SRU-plus 50-W-180-90-M-8-M8-AS ID 0362637 0362647 0362667 All modules are also avalable n a Vton verson. Please contact us for detals. 59
SRU-plus 50 Unversal swvel unts Man vew for SRU-plus wthout EDF The man vew shows the SRU-plus n the most basc verson, wth a swvel angle of 180 /90, small end poston adjustablty of 3, wthout a mddle poston, and wthout flud feed-through. The SDV-P pressure mantenance valve can be used to mantan the poston n the case of a loss of pressure (see Accessores catalog secton). A, a Man / drect connecton, swvel unt clockwse turnng B, b Man / drect connecton, swvel unt counterclockwse turnng 1 Connecton swvel unt 2 Attachment connecton GM Ft for centerng pns HT Depth of the centerng sleeve hole n the counter part IT Cover caps IK Not ntended for mountng the unt, only for attachments IL Sensor MMS 22.. 60
SRU-plus 50 Unversal swvel unts Man vew for SRU-plus wth EDF The man vew shows the SRU-plus wth the EDF and flud feed-through n the most basc verson, wth a swvel angle of 180 /90, small end poston adjustablty of 3, and wthout a mddle poston. The SRU-plus swvel unt wth the EDF opton can only be mounted from the bottom. A, a Man / drect connecton, swvel unt clockwse turnng B, b Man / drect connecton, swvel unt counterclockwse turnng 1 Connecton swvel unt 2 Attachment connecton BO Flud feed-through GL Ft for centerng sleeves HT Depth of the centerng sleeve hole n the counter part HM Input for 3 pole sensor feed-through HN Input for 4 pole sensor feed-through HO Sensor feed-through output 61
SRU-plus 50 Unversal swvel unts Hose-free drect connecton M6 Pnon wthout flud feed-through 3 Adapter 4 Rotary unt The drect connecton s used for supplyng compressed ar wthout hoses. Instead, the pressure medum s fed through bore-holes n the mountng plate. 2 Attachment connecton BR Through-hole GL Ft for centerng sleeves GQ Clearance for fttng screw Mountng pattern for fastenng the rotatng load to the pnon. The 4x large threads for 4 screws and 2 counter bores for centerng sleeves opton s preferable to the 4x small threads for 2 screws and 2 shoulder bots (n the deeper counter bores) opton. Pnon wth flud feed-through Large end poston adjustablty 90 2 Attachment connecton BR Through-hole GL Ft for centerng sleeves GQ Clearance for fttng screw Mountng pattern for fastenng the rotatng load to the pnon. The 4x large threads for 4 screws and 2 counter bores for centerng sleeves opton s preferable to the 4x small threads for 2 screws and 2 shoulder bots (n the deeper counter bores) opton. Vew applcable only for versons wthout EDF! IT Cover caps Dmensonal changes for the opton wth large end poston adjustablty (90 ). Ths permts the end postons to be adjusted by up to 93. More nformaton can be found n the ntroducton to the seres. 62
SRU-plus 50 Unversal swvel unts Pneumatc mddle poston (M) Locked mddle poston (VM) A, a Man / drect connecton, swvel unt clockwse turnng B, b Man / drect connecton, swvel unt counterclockwse turnng C, c Man / drect connecton, mddle poston D, d Man / drect connecton, mddle poston Dmensonal changes for the opton wth the pneumatc mddle poston. Heavy attachments may swng before they reach the fnal poston. The locked mddle poston (VM) can resolve ths. A, a Man / drect connecton, swvel unt clockwse turnng B, b Man / drect connecton, swvel unt counterclockwse turnng C, c Man / drect connecton, mddle poston D, d Man / drect connecton, mddle poston Dmensonal changes wth the locked mddle poston (VM) opton. The mddle poston s locked and s actuated wth the force of the man drve pston. Shock absorbers dampen the travel to the mddle poston and prevent overshootng. Connectons for flud feed-through Adapter plate desgn A, a Man / drect connecton, swvel unt clockwse turnng B, b Man / drect connecton, swvel unt counterclockwse turnng BO Flud feed-through GL Ft for centerng sleeves HT Depth of the centerng sleeve hole n the counter part Suggested here s an adapter plate desgn whch allows for all flud feed-throughs to be accessed as easly as possble. Vew applcable only for versons wthout EDF! Lower mountng plate for the flud feed-through opton. Vacuum, gases or fluds can be fed through. The connecton may be a screw type or a drect connecton. Vew applcable only for versons wthout EDF! 63
SRU-plus 50 Unversal swvel unts Pneumatc dagram of SRU-plus-VM vertcal axs Pneumatc dagram of SRU-plus-VM horzontal axs 0 VM rotary actuators wth a vertcal rotary axs are generally actuated by two 5/3 drectonal control valves wth an exhausted mddle poston. To prevent damage, t s essental to pay attenton to the actuaton sequence ndcated n the operatng manual. VM rotary actuators wth a horzontal or non-vertcal rotary axs must generally be actuated by three 5/3 drectonal control valves wth an exhausted mddle poston. To prevent damage, t s essental to pay attenton to the actuaton sequence ndcated n the operatng manual. Attachment kt for proxmty swtch at SRU-plus wth EDF Dstrbutor for SRU-plus The attachment kt cannot be ordered separately. The SRU-plus wth EDF and attachment kt are delvered as a complete unt by SCHUNK. Please pay attenton to our optons SRU-plus -AS. 3 Adapter BO Flud feed-through FQ Dstrbutor for meda feed-through GL Ft for centerng sleeves The dstrbutor for SRU-plus facltates the use of the flud feed-throughs, both at the drect attachment to the dstrbutor, and n the lnes conveyng the flud nsde the adapter plate. Due to the dstrbutor, only a smple drllng pattern has to be drlled n the adapter plate located between the pnon and the dstrbutor. Descrpton ID Dstrbutor for SRU-plus V-SRU-plus 50/60 0358192 Vew applcable only for versons wthout EDF! 64
SRU-plus 50 Unversal swvel unts Attachment kt for proxmty swtch at SRU-plus wthout EDF Inductve proxmty swtches IN for SRU-plus wthout EDF IT AS-NHS-F-SRU-plus 50 IK AS-NHS-SRU-plus 50 The sze-specfc attachment kt s requred for nstallng the nductve proxmty swtches. Up to three proxmty swtches (2x end poston, 1x mddle poston) can be attached usng the attachment kt. Descrpton ID Mountng kt for proxmty swtch wth adjustable cam AS-NHS-SRU-plus 50/60 0362690 AS-NHS-SRU-plus 50/60-8 0362691 Mountng kt for proxmty swtch wth fxed cam AS-NHS-F-SRU-plus 50/60 0362695 AS-NHS-F-SRU-plus 50/60-8 0362696 Please note the number of necessary feed-throughs for your swvel unt when selectng the proper attachment kt. AQ Cable outlet IT Sensor IN... IK Sensor IN..-SA End and ntermedate poston montorng can be mounted wth mountng kt Descrpton ID Often combned Mountng kt for proxmty swtch wth adjustable cam AS-NHS-SRU-plus 50/60 0362690 AS-NHS-SRU-plus 50/60-8 0362691 Mountng kt for proxmty swtch wth fxed cam AS-NHS-F-SRU-plus 50/60 0362695 AS-NHS-F-SRU-plus 50/60-8 0362696 Inductve Proxmty Swtches IN 80-S-M12 0301578 IN 80-S-M8 0301478 IN-C 80-S-M8 0301475 INK 80-S 0301550 INK 80-SL 0301579 Inductve proxmty swtch wth lateral outlet IN 80-S-M12-SA 0301587 IN 80-S-M8-SA 0301483 INK 80-S-SA 0301566 Vew applcable only for versons wthout EDF! 65
SRU-plus 50 Unversal swvel unts Inductve proxmty swtches IN for SRU-plus wth EDF Electronc magnetc swtches MMS End and ntermedate poston montorng mounted drectly Descrpton ID Often combned Inductve Proxmty Swtches IN 80-S-M12 0301578 IN 80-S-M8 0301478 IN-C 80-S-M8 0301475 INK 80-S 0301550 INK 80-SL 0301579 Inductve proxmty swtch wth lateral outlet IN 80-S-M12-SA 0301587 IN 80-S-M8-SA 0301483 INK 80-S-SA 0301566 Cable extenson KV BG12-SG12 3P-0030-PNP 0301999 KV BG12-SG12 3P-0060-PNP 0301998 KV BW08-SG08 3P-0030-PNP 0301495 KV BW08-SG08 3P-0100-PNP 0301496 KV BW08-SG08 3P-0200-PNP 0301497 KV BW12-SG12 3P-0030-PNP 0301595 KV BW12-SG12 3P-0100-PNP 0301596 KV BW12-SG12 3P-0200-PNP 0301597 clp for plug/socket CLI-M12 0301464 CLI-M8 0301463 Connecton cables KA BG08-L 3P-0300-PNP 0301622 KA BG08-L 3P-0500-PNP 0301623 KA BG12-L 3P-0500-PNP 30016369 KA BW08-L 3P-0300-PNP 0301594 KA BW08-L 3P-0500-PNP 0301502 KA BW12-L 3P-0300-PNP 0301503 KA BW12-L 3P-0500-PNP 0301507 Sensor dstrbutor V2-M12 0301776 V2-M8 0301775 V4-M12 0301747 V4-M8 0301746 V8-M12 0301752 V8-M8 0301751 AQ Cable outlet IT Sensor MMS 22.. IK Sensor MMS 22...-SA End and ntermedate poston montorng mounted n C-slot Descrpton ID Often combned Electronc magnetc swtches MMS MMS 22-S-M8-PNP 0301032 MMSK 22-S-PNP 0301034 MMS electronc magnetc swtches wth lateral outlet MMS 22-S-M8-PNP-SA 0301042 MMSK 22-S-PNP-SA 0301044 Cable extenson KV BW08-SG08 3P-0030-PNP 0301495 KV BW08-SG08 3P-0100-PNP 0301496 KV BW08-SG08 3P-0200-PNP 0301497 clp for plug/socket CLI-M8 0301463 Connecton cables KA BG08-L 3P-0300-PNP 0301622 KA BG08-L 3P-0500-PNP 0301623 KA BW08-L 3P-0300-PNP 0301594 KA BW08-L 3P-0500-PNP 0301502 Sensor dstrbutor V2-M8 0301775 V4-M8 0301746 V8-M8 0301751 Two sensors (closer/s) are requred for each unt and extenson cables are avalable as an opton. For sensor cables, note the mnmum permssble bendng rad. These are generally 35 mm. Two sensors (closer/s) are requred for each unt and extenson cables are avalable as an opton. For sensor cables, note the mnmum permssble bendng rad. These are generally 35 mm. 66
SRU-plus 50 Unversal swvel unts Programmable magnetc swtches MMS PI1 AQ Cable outlet IT Sensor MMS 22 PI1-... IK Sensor MMS 22..-PI1-...-SA Poston montorng wth one programmable poston per sensor and electroncs ntegrated n the sensor. Can be programmed usng MT magnetc teachng tool (ncluded n scope of delvery) or ST plug teachng tool (optonal). End poston montorng s mounted n the C-slot. If the ST plug teachng tools are lsted n the table provded, teachng s only possble wth the ST teachng tools. Descrpton ID Often combned Programmable magnetc swtches MMS PI1 MMS 22-PI1-S-M8-PNP 0301160 MMSK 22-PI1-S-PNP 0301162 Programmable magnetc swtches MMS PI1 wth lateral cable outlet MMS 22-PI1-S-M8-PNP-SA 0301166 MMSK 22-PI1-S-PNP-SA 0301168 Programmable magnetc swtches MMS PI1 wth stanless steel housng MMS 22-PI1-S-M8-PNP-HD 0301110 MMSK 22-PI1-S-PNP-HD 0301112 Two sensors (closer/s) are requred for each unt and extenson cables are avalable as an opton. For sensor cables, note the mnmum permssble bendng rad. These are generally 35 mm. 67
SRU-plus 60 Unversal swvel unts Pnon load The ndcated moments and forces are statcal values and should not appear smultaneously Throttlng has to be done for ensurng that the rotary moton takes place wthout mpact or bouncng. otherwse the servce lfe reduces. M y max. 340 Nm F z max. 9000 N Techncal data of SRU-plus wthout mddle poston Desgnaton (soft dampng) SRU-plus 60-W-90-3 SRU-plus 60-W-180-3 SRU-plus 60-W-180-90 ID 0362800 0362820 0362850 End poston dampng Hydr. damper Hydr. damper Hydr. damper Angle of rotaton [ ] 90.0 180.0 180.0 End poston adjustablty [ ] 3.0 3.0 90.0 Torque [Nm] 72.0 72.0 72.0 Mddle poston none none none Protecton class IP 67 67 67 Weght [kg] 12.80 12.80 13.50 Flud consumpton (2 x nomnal angle) [cm³] 656.0 1120.0 1120.0 Nomnal operatng pressure [bar] 6.0 6.0 6.0 mn./max. operatng pressure [bar] 4/8 4/8 4/8 Dameter of connectng hose 8 x 6 x 1 8 x 6 x 1 8 x 6 x 1 mn./max. ambent temperature [ C] 5/60 5/60 5/60 Repeat accuracy [ ] 0.05 0.05 0.05 Cleanroom class ISO 14644-1 5 5 5 Optons wth flud feed-through Desgnaton (soft dampng) SRU-plus 60-W-90-3-8 SRU-plus 60-W-180-3-8 SRU-plus 60-W-180-90-8 ID 0362802 0362822 0362852 Torque [Nm] 70.0 70.0 70.0 Weght [kg] 13 13 13.7 No. of flud feed-throughs 8 8 8 max. pressure n the ar feed-through [bar] 8 8 8 Optons wth flud and electrc feed-through Desgnaton (soft dampng) SRU-plus 60-W-90-3-8-M8 SRU-plus 60-W-180-3-8-M8 SRU-plus 60-W-180-90-8-M8 ID 0362804 0362824 0362854 Weght [kg] 14.95 14.95 15.65 Number / sze of E-fttngs on the output sde 9/M8 9/M8 9/M8 Number of wres 10 10 10 max. voltage [V] 24 24 24 Max. current per wre / total [A] 1/1 1/1 1/1 Optons wth flud and electrc feed-through and mountng kt Desgnaton (soft dampng) SRU-plus 60-W-90-3-8-M8-AS SRU-plus 60-W-180-3-8-M8-AS SRU-plus 60-W-180-90-8-M8-AS ID 0362807 0362827 0362857 68
SRU-plus 60 Unversal swvel unts Max. admssble nerta J Mass moment of nerta Cycles per hour The dagrams are vald for swvel angles of 90 and 180, unts wthout center poston and for applcatons wth a vertcal swvel axs as well as for absolutely centrc loads wth a horzontal rotary axs and wth a pneumatc operatng pressure of 6 bar. The swvelng tmes per throttlng have to be observed, otherwse the lfe tme could reduce. We wll be happy to help you to desgn other cases of applcaton. Swvelng tme Techncal data of SRU-plus wth mddle poston Desgnaton (soft dampng) SRU-plus 60-W-180-3-M SRU-plus 60-W-180-3-VM SRU-plus 60-W-180-90-M ID 0362830 0362840 0362860 End poston dampng Hydr. damper Hydr. damper Hydr. damper Angle of rotaton [ ] 180.0 180.0 180.0 End poston adjustablty [ ] 3.0 3.0 90.0 Torque [Nm] 72.0 72.0 72.0 Mddle poston 1 x M (pneumatc) 1 x VM (locked) 1 x M (pneumatc) Adjustablty of mddle poston [ ] 3.0 3.0 3.0 Protecton class IP 67 67 67 Weght [kg] 16.80 17.80 17.50 Flud consumpton (2 x nomnal angle) [cm³] 1120.0 1120.0 1120.0 Nomnal operatng pressure [bar] 6.0 6.0 6.0 mn./max. operatng pressure [bar] 4/8 4/6.5 4/8 Dameter of connectng hose 8 x 6 x 1 8 x 6 x 1 8 x 6 x 1 mn./max. ambent temperature [ C] 5/60 5/60 5/60 Repeat accuracy [ ] 0.05 0.05 0.05 Cleanroom class ISO 14644-1 5 5 5 Optons wth flud feed-through Desgnaton (soft dampng) SRU-plus 60-W-180-3-M-8 SRU-plus 60-W-180-3-VM-8 SRU-plus 60-W-180-90-M-8 ID 0362832 0362842 0362862 Torque [Nm] 70.0 70.0 70.0 Weght [kg] 17 18 17.7 No. of flud feed-throughs 8 8 8 max. pressure n the ar feed-through [bar] 8 8 8 Optons wth flud and electrc feed-through Desgnaton (soft dampng) SRU-plus 60-W-180-3-M-8-M8 SRU-plus 60-W-180-3-VM-8-M8 SRU-plus 60-W-180-90-M-8-M8 ID 0362834 0362844 0362864 Weght [kg] 18.95 19.95 19.65 Number / sze of E-fttngs on the output sde 9/M8 9/M8 9/M8 Number of wres 10 10 10 max. voltage [V] 24 24 24 Max. current per wre / total [A] 1/1 1/1 1/1 Optons wth flud and electrc feed-through and mountng kt Desgnaton (soft dampng) SRU-plus 60-W-180-3-M-8-M8-AS SRU-plus 60-W-180-3-VM-8-M8-AS SRU-plus 60-W-180-90-M-8-M8-AS ID 0362837 0362847 0362867 All modules are also avalable n a Vton verson. Please contact us for detals. 69
SRU-plus 60 Unversal swvel unts Man vew for SRU-plus wthout EDF The man vew shows the SRU-plus n the most basc verson, wth a swvel angle of 180 /90, small end poston adjustablty of 3, wthout a mddle poston, and wthout flud feed-through. The SDV-P pressure mantenance valve can be used to mantan the poston n the case of a loss of pressure (see Accessores catalog secton). A, a Man / drect connecton, swvel unt clockwse turnng B, b Man / drect connecton, swvel unt counterclockwse turnng 1 Connecton swvel unt 2 Attachment connecton GL Ft for centerng sleeves GM Ft for centerng pns HT Depth of the centerng sleeve hole n the counter part IT Cover caps IK Not ntended for mountng the unt, only for attachments IL Sensor MMS 22.. 70
SRU-plus 60 Unversal swvel unts Man vew for SRU-plus wth EDF The man vew shows the SRU-plus wth the EDF and flud feed-through n the most basc verson, wth a swvel angle of 180 /90, small end poston adjustablty of 3, and wthout a mddle poston. The SRU-plus swvel unt wth the EDF opton can only be mounted from the bottom. A, a Man / drect connecton, swvel unt clockwse turnng B, b Man / drect connecton, swvel unt counterclockwse turnng 1 Connecton swvel unt 2 Attachment connecton BO Flud feed-through GL Ft for centerng sleeves HT Depth of the centerng sleeve hole n the counter part HM Input for 3 pole sensor feed-through HN Input for 4 pole sensor feed-through HO Sensor feed-through output 71
SRU-plus 60 Unversal swvel unts Hose-free drect connecton M6 Pnon wthout flud feed-through 3 Adapter 4 Rotary unt The drect connecton s used for supplyng compressed ar wthout hoses. Instead, the pressure medum s fed through bore-holes n the mountng plate. 2 Attachment connecton BR Through-hole GL Ft for centerng sleeves GQ Clearance for fttng screw Mountng pattern for fastenng the rotatng load to the pnon. The 4x large threads for 4 screws and 2 counter bores for centerng sleeves opton s preferable to the 4x small threads for 2 screws and 2 shoulder bots (n the deeper counter bores) opton. Pnon wth flud feed-through Large end poston adjustablty 90 2 Attachment connecton BR Through-hole GL Ft for centerng sleeves GQ Clearance for fttng screw Mountng pattern for fastenng the rotatng load to the pnon. The 4x large threads for 4 screws and 2 counter bores for centerng sleeves opton s preferable to the 4x small threads for 2 screws and 2 shoulder bots (n the deeper counter bores) opton. Vew applcable only for versons wthout EDF! IT Cover caps Dmensonal changes for the opton wth large end poston adjustablty (90 ). Ths permts the end postons to be adjusted by up to 93. More nformaton can be found n the ntroducton to the seres. 72
SRU-plus 60 Unversal swvel unts Pneumatc mddle poston (M) Locked mddle poston (VM) A, a Man / drect connecton, swvel unt clockwse turnng B, b Man / drect connecton, swvel unt counterclockwse turnng C, c Man / drect connecton, mddle poston D, d Man / drect connecton, mddle poston Dmensonal changes for the opton wth the pneumatc mddle poston. Heavy attachments may swng before they reach the fnal poston. The locked mddle poston (VM) can resolve ths. A, a Man / drect connecton, swvel unt clockwse turnng B, b Man / drect connecton, swvel unt counterclockwse turnng C, c Man / drect connecton, mddle poston D, d Man / drect connecton, mddle poston Dmensonal changes wth the locked mddle poston (VM) opton. The mddle poston s locked and s actuated wth the force of the man drve pston. Shock absorbers dampen the travel to the mddle poston and prevent overshootng. Connectons for flud feed-through Adapter plate desgn A, a Man / drect connecton, swvel unt clockwse turnng B, b Man / drect connecton, swvel unt counterclockwse turnng BO Flud feed-through GL Ft for centerng sleeves HT Depth of the centerng sleeve hole n the counter part Suggested here s an adapter plate desgn whch allows for all flud feed-throughs to be accessed as easly as possble. Vew applcable only for versons wthout EDF! Lower mountng plate for the flud feed-through opton. Vacuum, gases or fluds can be fed through. The connecton may be a screw type or a drect connecton. Vew applcable only for versons wthout EDF! 73
SRU-plus 60 Unversal swvel unts Pneumatc dagram of SRU-plus-VM vertcal axs Pneumatc dagram of SRU-plus-VM horzontal axs 0 VM rotary actuators wth a vertcal rotary axs are generally actuated by two 5/3 drectonal control valves wth an exhausted mddle poston. To prevent damage, t s essental to pay attenton to the actuaton sequence ndcated n the operatng manual. VM rotary actuators wth a horzontal or non-vertcal rotary axs must generally be actuated by three 5/3 drectonal control valves wth an exhausted mddle poston. To prevent damage, t s essental to pay attenton to the actuaton sequence ndcated n the operatng manual. Attachment kt for proxmty swtch at SRU-plus wth EDF Dstrbutor for SRU-plus The attachment kt cannot be ordered separately. The SRU-plus wth EDF and attachment kt are delvered as a complete unt by SCHUNK. Please pay attenton to our optons SRU-plus -AS. 3 Adapter BO Flud feed-through FQ Dstrbutor for meda feed-through GL Ft for centerng sleeves The dstrbutor for SRU-plus facltates the use of the flud feed-throughs, both at the drect attachment to the dstrbutor, and n the lnes conveyng the flud nsde the adapter plate. Due to the dstrbutor, only a smple drllng pattern has to be drlled n the adapter plate located between the pnon and the dstrbutor. Descrpton ID Dstrbutor for SRU-plus V-SRU-plus 50/60 0358192 Vew applcable only for versons wthout EDF! 74
SRU-plus 60 Unversal swvel unts Attachment kt for proxmty swtch at SRU-plus wthout EDF Inductve proxmty swtches IN for SRU-plus wthout EDF IT AS-NHS-F-SRU-plus 60 IK AS-NHS-SRU-plus 60 The sze-specfc attachment kt s requred for nstallng the nductve proxmty swtches. Up to three proxmty swtches (2x end poston, 1x mddle poston) can be attached usng the attachment kt. Descrpton ID Mountng kt for proxmty swtch wth adjustable cam AS-NHS-SRU-plus 50/60 0362690 AS-NHS-SRU-plus 50/60-8 0362691 Mountng kt for proxmty swtch wth fxed cam AS-NHS-F-SRU-plus 50/60 0362695 AS-NHS-F-SRU-plus 50/60-8 0362696 Please note the number of necessary feed-throughs for your swvel unt when selectng the proper attachment kt. AQ Cable outlet IT Sensor IN... IK Sensor IN..-SA End and ntermedate poston montorng can be mounted wth mountng kt Descrpton ID Often combned Mountng kt for proxmty swtch wth adjustable cam AS-NHS-SRU-plus 50/60 0362690 AS-NHS-SRU-plus 50/60-8 0362691 Mountng kt for proxmty swtch wth fxed cam AS-NHS-F-SRU-plus 50/60 0362695 AS-NHS-F-SRU-plus 50/60-8 0362696 Inductve Proxmty Swtches IN 80-S-M12 0301578 IN 80-S-M8 0301478 IN-C 80-S-M8 0301475 INK 80-S 0301550 INK 80-SL 0301579 Inductve proxmty swtch wth lateral outlet IN 80-S-M12-SA 0301587 IN 80-S-M8-SA 0301483 INK 80-S-SA 0301566 Vew applcable only for versons wthout EDF! 75
SRU-plus 60 Unversal swvel unts Inductve proxmty swtches IN for SRU-plus wth EDF Electronc magnetc swtches MMS End and ntermedate poston montorng mounted drectly Descrpton ID Often combned Inductve Proxmty Swtches IN 80-S-M12 0301578 IN 80-S-M8 0301478 IN-C 80-S-M8 0301475 INK 80-S 0301550 INK 80-SL 0301579 Inductve proxmty swtch wth lateral outlet IN 80-S-M12-SA 0301587 IN 80-S-M8-SA 0301483 INK 80-S-SA 0301566 Cable extenson KV BG12-SG12 3P-0030-PNP 0301999 KV BG12-SG12 3P-0060-PNP 0301998 KV BW08-SG08 3P-0030-PNP 0301495 KV BW08-SG08 3P-0100-PNP 0301496 KV BW08-SG08 3P-0200-PNP 0301497 KV BW12-SG12 3P-0030-PNP 0301595 KV BW12-SG12 3P-0100-PNP 0301596 KV BW12-SG12 3P-0200-PNP 0301597 clp for plug/socket CLI-M12 0301464 CLI-M8 0301463 Connecton cables KA BG08-L 3P-0300-PNP 0301622 KA BG08-L 3P-0500-PNP 0301623 KA BG12-L 3P-0500-PNP 30016369 KA BW08-L 3P-0300-PNP 0301594 KA BW08-L 3P-0500-PNP 0301502 KA BW12-L 3P-0300-PNP 0301503 KA BW12-L 3P-0500-PNP 0301507 Sensor dstrbutor V2-M12 0301776 V2-M8 0301775 V4-M12 0301747 V4-M8 0301746 V8-M12 0301752 V8-M8 0301751 AQ Cable outlet IT Sensor MMS 22.. IK Sensor MMS 22...-SA End and ntermedate poston montorng mounted n C-slot Descrpton ID Often combned Electronc magnetc swtches MMS MMS 22-S-M8-PNP 0301032 MMSK 22-S-PNP 0301034 MMS electronc magnetc swtches wth lateral outlet MMS 22-S-M8-PNP-SA 0301042 MMSK 22-S-PNP-SA 0301044 Cable extenson KV BW08-SG08 3P-0030-PNP 0301495 KV BW08-SG08 3P-0100-PNP 0301496 KV BW08-SG08 3P-0200-PNP 0301497 clp for plug/socket CLI-M8 0301463 Connecton cables KA BG08-L 3P-0300-PNP 0301622 KA BG08-L 3P-0500-PNP 0301623 KA BW08-L 3P-0300-PNP 0301594 KA BW08-L 3P-0500-PNP 0301502 Sensor dstrbutor V2-M8 0301775 V4-M8 0301746 V8-M8 0301751 Two sensors (closer/s) are requred for each unt and extenson cables are avalable as an opton. For sensor cables, note the mnmum permssble bendng rad. These are generally 35 mm. Two sensors (closer/s) are requred for each unt and extenson cables are avalable as an opton. For sensor cables, note the mnmum permssble bendng rad. These are generally 35 mm. 76
SRU-plus 60 Unversal swvel unts Programmable magnetc swtches MMS PI1 AQ Cable outlet IT Sensor MMS 22 PI1-... IK Sensor MMS 22..-PI1-...-SA Poston montorng wth one programmable poston per sensor and electroncs ntegrated n the sensor. Can be programmed usng MT magnetc teachng tool (ncluded n scope of delvery) or ST plug teachng tool (optonal). End poston montorng s mounted n the C-slot. If the ST plug teachng tools are lsted n the table provded, teachng s only possble wth the ST teachng tools. Descrpton ID Often combned Programmable magnetc swtches MMS PI1 MMS 22-PI1-S-M8-PNP 0301160 MMSK 22-PI1-S-PNP 0301162 Programmable magnetc swtches MMS PI1 wth lateral cable outlet MMS 22-PI1-S-M8-PNP-SA 0301166 MMSK 22-PI1-S-PNP-SA 0301168 Programmable magnetc swtches MMS PI1 wth stanless steel housng MMS 22-PI1-S-M8-PNP-HD 0301110 MMSK 22-PI1-S-PNP-HD 0301112 Two sensors (closer/s) are requred for each unt and extenson cables are avalable as an opton. For sensor cables, note the mnmum permssble bendng rad. These are generally 35 mm. 77
SRU-plus 63 Unversal swvel unts Max. admssble nerta J Pnon load Mass moment of nerta Cycles per hour Swvelng tme The dagrams are vald for swvel angles of 90 and 180, unts wthout center poston and for applcatons wth a vertcal swvel axs as well as for absolutely centrc loads wth a horzontal rotary axs and wth a pneumatc operatng pressure of 6 bar. The swvelng tmes per throttlng have to be observed, otherwse the lfe tme could reduce. We wll be happy to help you to desgn other cases of applcaton. M y max. 950 Nm F z max. 11000 N The ndcated moments and forces are statcal values and should not appear smultaneously Throttlng has to be done for ensurng that the rotary moton takes place wthout mpact or bouncng. otherwse the servce lfe reduces. Techncal data of SRU-plus wthout mddle poston Desgnaton (soft dampng) SRU-plus 63-W-90-3-8-L SRU-plus 63-W-90-3-8-R SRU-plus 63-W-180-3-8 ID 0354841 0354851 0354801 Angle of rotaton [ ] 90.0 90.0 180.0 End poston adjustablty [ ] 2.0 2.0 2.0 Torque [Nm] 115.0 115.0 115.0 Mddle poston none none none Protecton class IP 67 67 67 Weght [kg] 26.50 26.50 26.50 Flud consumpton (2 x nomnal angle) [cm³] 656.0 656.0 1120.0 Nomnal operatng pressure [bar] 6.0 6.0 6.0 mn./max. operatng pressure [bar] 4.5/8 4.5/8 4.5/8 Dameter of connectng hose 8 x 6 x 1 8 x 6 x 1 8 x 6 x 1 No. of flud feed-throughs 8 8 8 mn./max. ambent temperature [ C] 5/60 5/60 5/60 Repeat accuracy [ ] 0.05 0.05 0.05 Cleanroom class ISO 14644-1 5 5 5 78
SRU-plus 63 Unversal swvel unts Man vew for SRU-plus The man vew shows the SRU-plus n the most basc verson,.e. wth swvel angles of 180 /90 and wth low end poston adjustablty of 3. The SDV-P pressure mantenance valve can be used to mantan the poston n the case of a loss of pressure (see Accessores catalog secton). A, a Man / drect connecton, swvel unt clockwse turnng B, b Man / drect connecton, swvel unt counterclockwse turnng 1 Connecton swvel unt 2 Attachment connecton AM Fttng screw GL Ft for centerng sleeves HT Depth of the centerng sleeve hole n the counter part 79
SRU-plus 63 Unversal swvel unts Hose-free drect connecton M8 Pnon wth flud feed-through 3 Adapter 4 Grppers The drect connecton s used for supplyng compressed ar wthout hoses. Instead, the pressure medum s fed through bore-holes n the mountng plate. 2 Attachment connecton GQ Clearance for fttng screw Mountng pattern for assemblng the rotatng load to the pnon. Connectons for flud feed-through Attachment kt for proxmty swtch IN 80 Lower mountng plate for the flud feed-through opton. Vacuum, gases or fluds can be fed through. The connecton may be a screw type or a drect connecton. CK Interferng contour of control cam CM Attachment kt IT MMS 30 IK Sensor IN... End poston montorng can be mounted wth an attachment kt. Descrpton ID Mountng kt for proxmty swtch wth adjustable cam AS-NHS-SRU-plus 63 0300762 Mountng kt for proxmty swtch wth fxed cam AS-NHS-F-SRU-plus 63 0300772 Ths attachment kt needs to be ordered optonally as an accessory. 80
SRU-plus 63 Unversal swvel unts IN 80 nductve proxmty swtches Electronc magnetc swtches MMS IT Sensor IN... End poston montorng can be mounted wth an attachment kt. Descrpton ID Often combned Mountng kt for proxmty swtch wth adjustable cam AS-NHS-SRU-plus 63 0300762 Mountng kt for proxmty swtch wth fxed cam AS-NHS-F-SRU-plus 63 0300772 Inductve Proxmty Swtches IN 80-S-M12 0301578 IN 80-S-M8 0301478 IN-C 80-S-M8 0301475 INK 80-S 0301550 INK 80-SL 0301579 Inductve proxmty swtch wth lateral outlet IN 80-S-M12-SA 0301587 IN 80-S-M8-SA 0301483 INK 80-S-SA 0301566 Two sensors (closer/s) are requred for each unt and extenson cables are avalable as an opton. Ths attachment kt needs to be ordered optonally as an accessory. For sensor cables, note the mnmum permssble bendng rad. These are generally 35 mm. IT MMS 30 End poston montorng for mountng n the C-slot. Descrpton ID Often combned Electronc magnetc swtches MMS MMS 30-S-M12-PNP 0301571 MMS 30-S-M8-PNP 0301471 MMSK 30-S-PNP 0301563 Cable extenson KV BG12-SG12 3P-0030-PNP 0301999 KV BG12-SG12 3P-0060-PNP 0301998 KV BW08-SG08 3P-0030-PNP 0301495 KV BW08-SG08 3P-0100-PNP 0301496 KV BW08-SG08 3P-0200-PNP 0301497 KV BW12-SG12 3P-0030-PNP 0301595 KV BW12-SG12 3P-0100-PNP 0301596 KV BW12-SG12 3P-0200-PNP 0301597 clp for plug/socket CLI-M12 0301464 CLI-M8 0301463 Connecton cables KA BG08-L 3P-0300-PNP 0301622 KA BG08-L 3P-0500-PNP 0301623 KA BG12-L 3P-0500-PNP 30016369 KA BW08-L 3P-0300-PNP 0301594 KA BW08-L 3P-0500-PNP 0301502 Sensor dstrbutor V2-M8 0301775 V4-M8 0301746 V8-M8 0301751 Two sensors (closer/s) are requred for each unt and extenson cables are avalable as an opton. For sensor cables, note the mnmum permssble bendng rad. These are generally 35 mm. 81
SCHUNK GmbH & Co. KG Spann- und Greftechnk Bahnhofstr. 106-134 D-74348 Lauffen/Neckar Tel. +49-7133-103-0 Fax +49-7133-103-2239 nfo@de.schunk.com www.schunk.com www.youtube.com/schunkhq www.twtter.com/schunk_hq www.facebook.com/schunk.hq Jens Lehmann, German goalkeeper legend, SCHUNK brand ambassador snce 2012 for precse grppng and safe holdng. www.gb.schunk.com/lehmann 2017-04-27 2017 SCHUNK GmbH & Co. KG