Chip carrier package for mount The, S5107, and S7510 are Si PIN photodiodes sealed in chip carrier packages suitable for mount using automated solder reflow techniques. These photodiodes have large photosensitive areas, making them suitable for FSO (free space optics) where a wide field-of-view angle is required. Other applications include POS scanners, power meters and analytical instruments. Features : 5 5 mm S5107: 10 10 mm : 10 mm S7510: 6 11 mm Ceramic chip carrier package for mount Suitable for solder reflow High sensitivity Applications FSO Laser radar Power meter Bar-code reader Structure / Absolute maximum ratings Type no. Dimensional outline/ Window material* area size Effective photosensitive area (mm) (mm ) /R 5 5 5 S5107 /R 10 10 100 /R 10 0 S7510 /R 6 11 66 Reverse voltage VR Max (V) Absolute maximum ratings Power Operating dissipation temperature P Topr (mw) ( C) Storage temperature Tstg ( C) 30 50-40 to +100-40 to +15 * Window R: Resin coating Note: Exceeding the absolute maximum ratings even momentarily may cause a drop in product quality. Always be sure to use the product within the absolute maximum ratings. Electrical and optical characteristics (Typ. Ta=5 C, unless otherwise noted) Type no. Spectral response range λ Peak sensitivity wavelength λp Photosensitivity S (A/W) Short circuit current Isc 100 lx (μa) Dark current ID Typ. Max. (na) (na) Temp. coefficient of ID TCID Cutoff frequency fc RL=50 Ω (MHz) Terminal capacitance Ct f=1 MHz (pf) NEP λ=λp λp 660 nm 780 nm 830 nm (nm) (nm) (times/ C) (W/Hz 1/ ) 7 0.4 5 0 40 1.6 10-14 S5107 110 0.9 10 10 150.4 10 30 to 1100 960 0.7 0.45 0.57 0.6 1.15-14 0.5 5 0 40 1.7 10-14 S7510 7 1.0 10 15 80.5 10-14 Note:, : For mass production, order unit is 100 pieces. S5107, S7510: For mass production, order unit is 50 pieces. www.hamamatsu.com 1
Spectral response 0.8 (Typ. Ta=5 C) Photosensitivity temperature characteristics +1.5 (Typ.) 0.7 Photosensitivity (A/W) 0.6 0.5 0.4 0.3 0. 0.1 Temperature coefficient (%/ C) +1.0 +0.5 0 0 00 300 400 500 600 700 800 900 1000 1100-0.5 00 300 400 500 600 700 800 900 1000 1100 Wavelength (nm) Wavelength (nm) KPINB0165EB KPINB0093EC Dark current vs. reverse voltage 10 na (Typ. Ta=5 C) Terminal capacitance vs. reverse voltage 10 nf (Typ. Ta=5 C, f=1 MHz) 1 na S5107, S7510 Dark current 100 pa 10 pa Terminal capacitance 1 nf 100 pf S5107 S7510 1 pa 0.1 1 10 100 10 pf 0.1 1 10 100 Reverse voltage (V) Reverse voltage (V) KPINB0166EB KPINB018EB
Dimensional outlines (unit: mm) S5107 8.80 ± 0. 14.5 ± 0. 10.6 ± 0. Index mark 1.5.5 0.46 1.6 ± 0.15 16.5 ± 0. 1.5 1.8 3.0 0.46 1.6 ± 0.15 (10 ) 0.6 1.7 KPINA000EG (10 ) 1..54 1.8 KPINA0013ED S7510 (4 ) R0.5 15.35 14.8 ± 0. 6.50 0.46 1.6 ± 0.15 11.5 ± 0. 0.46 1.6 ± 0.15 (18 ) 0.6 (16 ) 0.6 1.7 KPINA0055EC 1.7 KPINA0056EC 3
Recommended land pattern (unit: mm) S5107 y:.5 min. x: 1. max. y:.8 min. KPINC0031EA KPINC003EA S7510 y: 3.0 min. y: 3.0 min. KPINC008EB KPINC0033EA 1. Solder all terminals.. Do not make the land area larger than necessary. 3. It is preferable that the land sizes be about equal. 4. Make land width x about the same as the terminal width. 5. Make land length y at least 1 mm longer than the terminal length, protruding outside the package. 4
Precautions The light input window of this product uses soft silicone. Avoid touching the window to keep it from grime and damage that can decrease sensitivity. External force applied to the may deform or cut off the wires, so do not touch the window to prevent such troubles. Use rosin flux when soldering, to prevent the terminal lead corrosion. Reflow oven temperature should be at 60 C maximum for 5 seconds maximum time under the conditions that no moisture absorption occurs. Reflow soldering conditions differ depending on the type of PC board and reflow oven. Carefully check these conditions before use. swells when it absorbs organic solvent, so do not use any solvent other than alcohol. Avoid unpacking until you actually use this product to prevent the terminals from oxidation and dust deposits or the coated from absorbing moisture. When the product is stored for 3 months while not unpacked or 4 hours have elapsed after unpacking, perform baking in nitrogen atmosphere at 150 C for 3 to 5 hours or at 10 C for 1 to 15 hours before use. Related information www.hamamatsu.com/sp/ssd/doc_en.html Precautions Disclaimer Surface mount type products Technical information Si photodiodes / Application circuit examples Information described in this material is current as of April 018. Product specifications are subject to change without prior notice due to improvements or other reasons. This document has been carefully prepared and the information contained is believed to be accurate. In rare cases, however, there may be inaccuracies such as text errors. Before using these products, always contact us for the delivery specification sheet to check the latest specifications. The product warranty is valid for one year after delivery and is limited to product repair or replacement for defects discovered and reported to us within that one year period. However, even if within the warranty period we accept absolutely no liability for any loss caused by natural disasters or improper product use. Copying or reprinting the contents described in this material in whole or in part is prohibited without our prior permission. www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Solid State Division 116-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, Bridgewater, N.J. 08807, U.S.A., Telephone: (1) 908-31-0960, Fax: (1) 908-31-118, E-mail: usa@hamamatsu.com Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-811 Herrsching am Ammersee, Germany, Telephone: (49) 815-375-0, Fax: (49) 815-65-8, E-mail: info@hamamatsu.de France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 9188 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10, E-mail: infos@hamamatsu.fr United Kingdom: Hamamatsu Photonics UK Limited: Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-94888, Fax: (44) 1707-35777, E-mail: info@hamamatsu.co.uk North Europe: Hamamatsu Photonics Norden AB: Torshamnsgatan 35 16440 Kista, Sweden, Telephone: (46)8-509 031 00, Fax: (46)8-509 031 01, E-mail: info@hamamatsu.se Italy: Hamamatsu Photonics Italia S.r.l.: Strada della Moia, 1 int. 6, 000 Arese (Milano), Italy, Telephone: (39)0-93 58 17 33, Fax: (39)0-93 58 17 41, E-mail: info@hamamatsu.it China: Hamamatsu Photonics (China) Co., Ltd.: B101, Jiaming Center, No.7 Dongsanhuan Beilu, Chaoyang District, Beijing 10000, China, Telephone: (86) 10-6586-6006, Fax: (86) 10-6586-866, E-mail: hpc@hamamatsu.com.cn Taiwan: Hamamatsu Photonics Taiwan Co., Ltd.: 8F-3, No. 158, Section, Gongdao 5th Road, East District, Hsinchu, 300, Taiwan R.O.C. Telephone: (886)03-659-0080, Fax: (886)03-659-0081, E-mail: info@hamamatsu.com.tw Cat. No. KPIN1033E07 Apr. 018 DN 5