Power & Cable Routing for Tables Technology. Within reach.
02 OVERVIEW Technology. Out of sight, but always within reach. Enwork furniture is developed to support today s evolving wired and wireless office environments. Power and cable routing, both horizontal and vertical, is designed into every new Enwork table. The result? Technology integration with clean, uncluttered aesthetics and convenient user access. Many of Enwork s conference table bases can accommodate power/data assemblies directly over the base, concealing the power and cable routing with only the user interface visible. Some conference bases are large enough to contain technology components. And many bases are open at the bottom so they can be placed directly over floor cores. In this brochure, you ll find illustrations and descriptions of some of the different routing options for each line of table bases.
03 CONCURRENCE Power Data Video Concurrence 5 Conference Bases Vertically, all bases have a removable inner panel for easy maintenance. Power and cables route within the base cavity and exit through a small gap between the inner panel and bottom bracket. Horizontally, power and cables are routed between the two beams. Optional trough covers can fully conceal the clutter underneath. Concurrence 12 Build-Your-Own Conference Bases Power and cable routing is the same as the standard 5 base. 12 bases are designed to fit over a floor core. Additional space is available within the base cavity to house technology components. Bases feature an access door for easy maintenance. 12 bases can be added to a standard base and trough assembly. Using the build-your-own components, base assemblies can include any combination of 6 and 12 bases.
04 CONCURRENCE Concurrence VS Tables Horizontally, power and cables are routed between the two beams. Standard sliding trough covers fully conceal the clutter underneath. Vertically, power and video cables route within the mast to connect to the monitor. Power and cables can be routed through the bottom of the mast or through the table base. In both cases, they exit through a small gap between the inner panel and bottom bracket.
05 FOUNDATION Foundation 6 Individual Panel Bases Horizontally, cable grippers or cable managers (PDGR or PDJTR) can be specified to route power and cables beneath the table top. Vertically, power and cables route within the base cavity and exit through a small gap between the inner panel and the floor. An optional access door is available for easy maintenance. Foundation Panel Base and Trough Assemblies Horizontally, power and cables are routed within the optional trough fully concealing the clutter underneath. The trough includes cable grippers (PDGR) and a removable bottom panel. Vertically, power and cables route within the base cavity and exit through a small gap between the inner panel and the floor. All bases have an access door for easy maintenance.
06 FOUNDATION Foundation 10 Individual Conference Panel Bases Horizontally, cable grippers or cable managers (PDGR or PDJTR) can be specified to route power and cables beneath the table top. Vertically, power and cables route within the base cavity and attach to the floor completely concealed. All bases have an optional access door for easy maintenance. 10 individual bases are designed to sit directly over a floor core. Foundation Individual Drum Bases The top and bottom of the Drum base are open, allowing power and cables to be completely concealed within the base. An optional access door is available for easy maintenance. Drum Bases are designed to sit directly over top of a floor core.
07 IMPRESSION Impression Straight Legs Cable grippers or cable managers (PDGR or PDJTR) can be specified to route power and cables horizontally beneath the table top. through the straight leg via a hole at the top and bottom. Alternatively, removable leg covers can be added, creating a 3/8 channel to conceal and route power and cabling to the floor. Impression C-Legs Cable grippers or cable managers (PDGR or PDJTR) can be specified to route power and cables horizontally beneath the table top. With optional routing holes, power and cables route through the C-Leg via holes at the top and bottom. Alternatively, removable leg covers can be added, creating a 3/8 channel to conceal and route power and cabling to the floor. With optional integrated removable covers, power and cables route vertically inside of the C-Leg. A removable panel with a mousehole at the top and bottom provides access. Impression T-Legs Cable grippers or cable managers (PDGR or PDJTR) can be specified to route power and cables horizontally beneath the table top. With optional routing holes, power and cables route through the T-Leg via holes at the top and bottom. Alternatively, removable leg covers can be added, creating a 3/8 channel to conceal and route power and cabling to the floor. With optional integrated removable covers, power and cables route vertically inside of the T-Leg. A removable panel with a mousehole at the top and bottom provides access.
08 IMPRESSION Impression O-Legs Cable grippers or cable managers (PDGR or PDJTR) can be specified to route power and cables horizontally beneath the table top. through the O-Leg via a hole at the top and bottom. With optional removable leg covers, power and cables route vertically along the outside of the O-Leg within a 3/8 channel to the floor. Impression X-Bases w/ Power Data top plate Power and cables route vertically through the power data top plate and X-Base column, exiting via a hole at the bottom. Impression 4-Post X-Bases Cable grippers or cable managers (PDGR or PDJTR) can be specified to route power and cables horizontally beneath the table top. With the optional infill, power and cables are fully concealed. through an X-Base post via a hole at the top and bottom. Alternatively, removable leg covers can be added, creating a 3/8 channel to conceal and route power and cabling to the floor. Impression TT-Bases Cable grippers or cable managers (PDGR or PDJTR) can be specified to route power and cables horizontally beneath the table top. through the TT-Leg via a hole at the top and bottom. Alternatively, removable leg covers can be added, creating a 3/8 channel to conceal and route power and cabling to the floor.
09 LANDING TEAM TABLES Landing Team Tables (2 Panel) Horizontally, power and cables are routed between double keel panels with optional cable grippers or cable managers (PDGR or PDJTR), concealing clutter underneath. Vertically, the optional wire chase on either end provides a channel for power and cables to route to the floor, exiting through a mouse hole. Landing Team Tables (3 panel) Horizontally, power and cables are routed between double keel panels and through a large opening in the top of the center panel with optional cable grippers or cable managers (PDGR or PDJTR), concealing clutter underneath. Vertically, the optional wire chase on either end provides a channel for power and cables to route to the floor, exiting through a mouse hole.
10 LUGANO Power Data Adjustability Mechnaism Fixed Height Lugano Bases Horizontally, cable grippers or cable managers (PDGR or PDJTR) can be specified to route power and cables beneath the table top. Vertically, power and cables route within the base cavity and can attach to the floor through the open base, completely concealed. Alternatively, power and cables can exit between the base plate and the floor. All bases have an access door on one side for easy maintenance. Electric Height-Adjustable Lugano Bases Horizontally, cable grippers or cable managers (PDGR or PDJTR) can be specified to route power and cables beneath the table top. Vertically, power and cables route within the base cavity and can attach to the floor through the open base, completely concealed. Alternatively, power and cables can exit between the base plate and the floor. A plug strip comes installed inside the base to connect Power/Data assemblies and the height adjustable mechanisms. All bases have an access door on one side for easy maintenance.
11 SAWHORSE Sawhorse Training Table Legs Cable grippers or cable managers (PDGR or PDJTR) can be specified to route power and cables horizontally beneath the table top. Vertically, power and cables can be routed through a channel (PDUCM) down the side of the C-Leg. Sawhorse Conference Bases Cable grippers or cable managers (PDGR or PDJTR) can be specified to route power and cables horizontally beneath the table top. With optional routing holes, power and cables route vertically through the leg via holes at the top and bottom.
12 SENSATION Sensation Straight Legs Cable grippers or cable managers (PDGR or PDJTR) can be specified to route power and cables horizontally beneath the table top. through a hole at the top of the Straight Leg and exit through a second hole near the bottom of the leg column. Sensation C-Legs Cable grippers or cable managers (PDGR or PDJTR) can be specified to route power and cables horizontally beneath the table top. through a hole at the top of the C-Leg and exit through the bottom opening of the vertical column. Sensation T-Leg Flip Base Assemblies Cable grippers or cable managers (PDGR or PDJTR) can be specified to route power and cables horizontally beneath the table top. through a hole at the top of the T-Leg and exit through the bottom opening of the vertical column.
13 SENSATION Sensation Y-Legs Cable grippers or cable managers (PDGR or PDJTR) can be specified to route power and cables horizontally beneath the table top. through a hole at the top of the Y-Leg and exit through the bottom opening of the vertical column. Sensation 4-Post X-Bases Cable grippers or cable managers (PDGR or PDJTR) can be specified to route power and cables horizontally beneath the table top. through a hole at the top of an X-Base post and exit through the bottom opening of the vertical column. Sensation TT-Legs Cable grippers or cable managers (PDGR or PDJTR) can be specified to route power and cables horizontally beneath the table top. through a hole at the top of TT-Leg and exit through the bottom opening of the vertical column.
14 SOLANO Solano C-Legs through the C-Leg via a hole at the top and bottom. Optional cable grippers or cable managers route power and cables horizontally beneath the table top. Alternatively, removable leg covers can be added, creating a 3/8 channel to conceal and route power and cabling to the floor. Solano T-Legs through the T-Leg via a hole at the top and bottom. Optional cable grippers or cable managers route power and cables horizontally beneath the table top. Alternatively, removable leg covers can be added, creating a 3/8 channel to conceal and route power and cabling to the floor.
15 SOLANO Solano X-Bases w/ Power Data top plate Power and cables route vertically through the power data top plate and X-Base, exiting via a hole at the bottom. Solano TT-Bases through the TT-Leg via a hole at the top and bottom. Optional cable grippers or cable managers route power and cables horizontally beneath the table top. Alternatively, removable leg covers can be added, creating a 3/8 channel to conceal and route power and cabling to the floor.
16 STATEMENT Statement Conference Bases Horizontally, optional cable grippers or cable managers route power and cables beneath the table top. Vertically, power and cables route through a steel channel within the wooden base and exit through a mouse hole in the center of the base.
17 STEALTH Stealth Conference Base and Trough Assemblies Vertically, all bases have a removable inner panel for easy maintenance. Power and cables route within the base cavity and exit through a small gap between the inner panel and bottom bracket. Horizontally, power and cables are routed between the two beams. Optional trough covers can fully conceal the clutter underneath. Stealth Team Tables Vertically, power and cables route within the base cavity and exit through a small gap between the fixed inside panel and floor. Horizontally, optional cable grippers or cable managers route power and cables beneath the top.
18 VALUE Value Straight Legs With optional cable grippers or cable managers (PDGR or PDJTR), power and cables can be routed horizontally beneath the table top. Vertically, power and cables can be routed through a channel (PDUCM) down the outside of the Straight Leg. Value C-Legs With optional cable grippers or cable managers (PDGR or PDJTR), power and cables can be routed horizontally beneath the table top. Vertically, power and cables can be routed through a channel (PDUCM) down the outside of the C-Leg. Value H-Legs With optional cable grippers or cable managers (PDGR or PDJTR), power and cables can be routed horizontally beneath the table top. Vertically, power and cables can be routed through a channel (PDUCM) down the outside of the H-Leg.
12900 Christopher Drive Lowell, Michigan 49331 800.815.7251 www.enwork.com quotes@enwork.com orders@enwork.com 02/2017 Specifications subject to change without notice.