FLEXIBLE CONDUIT AND ACCESSORIES

CABLE PROTECTION AND EQUIPMENT FLEXIBLE CONDUIT AND ACCESSORIES Kabelflex Protecting underground buried electrical & telecommunication cables: Kabelflex is a cable conduit (duct) used for protecting underground buried electrical and telecommunications cables. Double wall corrugated construction. Smooth bore ensures easy draw-in of cables. Manufactured from HDPE with high impact strength Available in 4 nominal diameters DN50,75,110 & 160mm. Available in 6m lengths (DN75,110 and 160). 50m coils (DN50,75 and 110) and 25m coils (DN160). Carries the SABS certification mark in respect of specification SANS IEC 6138624:2005. Manufactured in accordance with BS EN50086-2-2. Simple push fit couplings available with or without rubber sealing ring. Outside Diameter Inside Diameter Standard Straight Length Minimum Bending Radius 6m length 50 40 n/a n/a K6311 75 63 1400 250 K27 110 95 2500 350 K869 160 137 4000 450 K925 Kabelflex Coils Outside Diameter Inside Diameter Standard Length Coils Minimum Bending Radius Coils 50 40 n/a n/a K413 75 63 1400 250 K916 110 95 2500 350 K870 160 137 4000 450 K926 product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 93 3

CABLE PROTECTION AND EQUIPMENT FLEXIBLE CONDUIT AND ACCESSORIES Couplings Description Size Nextube Coupling 50 K887 Nextube Coupling & Seal 75 K111 Nextube Coupling & Seal 110 K104 Nextube Coupling & Seal 160 K105 Bends Description Size Nextube Bend 50 K428 Nextube Bend 75 K425 Nextube Bend 110 K65 Nextube Bend 160 K538 94 2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.

product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 95 3

UNIVERSAL GLAND AND CABLE RATING CHART Approximate dimensions and nett mass per 100m Sustained current ratings Volt Drop To Suit Max overall Per Rated area Number Nett mass In air Laid Direct In Ducts diameter m/amp of cores (mm²) (kg) (amp) (amp) (amp) (mv) 1.5 2 14.0 39 23 29 23 29 0 E26 3 14.5 44 20 24 20 25 0 E27 4 15.5 49 20 24 20 25 0 E27 2.5 2 15 45 31 37 31 18 0 E27 3 15.5 50 26 32 26 15 0 E28 4 16.5 58 26 32 26 15 0-1 E28 4 2 17 59 41 50 41 11 0-1 E28 3 17.5 66 36 42 34 9.5 1 E28 4 18.5 77 36 42 34 9.5 1 E28 6 2 17.5 67 53 62 51 7.3 1 E28 3 18.5 78 45 53 43 6.4 1 E28 4 20.0 91 45 53 43 6.4 2 E30 10 2 21 89 72 83 68 4.4 2 E30 3 22 102 62 70 58 3.8 2 E30 4 23.5 120 62 70 58 3.8 2 E30 16 2 18.5 93 96 107 88 2.8 2 E30 3 20.5 114 82 91 75 2.4 2 E30 4 23 140 82 91 75 2.4 3 E32 25 2 21.5 120 128 142 116 1.75 2-3 E30 3 24.5 160 109 119 96 1.50 3 E32 4 27.5 200 109 119 96 1.50 3 E32 35 2 23 142 156 171 139 1.25 3 E30 3 27.5 200 133 143 116 1.10 3 E32 4 29.5 247 133 143 116 1.10 3-4 E34 50 3 29.5 250 162 169 138 0.81 4 E34 4 34 338 162 169 138 0.81 4 E34 70 3 33 344 205 210 171 0.57 4 E34 4 39.5 470 205 210 171 0.57 4-5 E35 95 3 38.5 482 252 251 205 0.43 4-5 E36 4 45 612 252 251 205 0.43 5 E36 120 3 42.5 590 291 285 234 0.35 5 E36 4 47 752 291 285 234 0.34 5 E38 150 3 45 705 334 320 263 0.29 5-6 E38 4 53 960 334 320 263 0.29 6 E40 185 3 52 910 383 361 298 0.25 6 E40 4 58 1150 383 361 298 0.25 6 E42 Size Clamp to Suit Note: Cable Construction: Plain annealed stranded copper conductors, PVC insulated, PVC Bedded, Galvanised steel wire armoured, PVC Sheathed (600/1000V). SABS 1507/1000 96 2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.

GLANDS, BOXES AND SHROUDS BW Captive Cone Gland TM (For PVC SWA PVC Cable) Size 0-20s 0503-0 H178 1-20 050301 H179 2-25 050302 H181 3-32 050303 H182 4-40 050304 H183 5-50 050305 H184 6-63 050306 H185 7-75 050307 H186 8-80 050308 H187 *9-90 050309 H188 *10-100 050310 H180 *11-110 050311 H4235 *12-120 050312 H4236 Features and Benefits For indoor and outdoor use. Two part handling, no loose parts. Freely rotating captive cone, providing an armour clamp and earth bond without twisting the armouring. Precision manufactured from high quality brass (nickel plated) and available in aluminium on request. Complete with high quality brass locknuts. Neoprene Shroud Size 0 1521-0 H416 1 152101 H417 2 152102 H418 3 152103 H419 4 152104 H420 5 152105 H421 6 152106 H422 7 152107 H423 PVC Shroud Size 0 1522-0 H428 1 152201 H429 2 152202 H430 3 152203 H431 4 152204 H432 5 152205 H433 6 152206 H434 7 152207 H435 8 152208 H436 9 152209 H437 10 152210 H438 Note: Longer lead times apply to items marked with a (*) in the sizes column and need to be confirmed at the time the order is placed. product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 97 3

GLANDS, BOXES AND SHROUDS A2 Compression Gland (For Unarmoured Cable) Size 00-20ss 053500 H198 0-20s 0535-0 H197 1-20 053501 H199 2-25 053502 H200 3-32 053503 H201 4-40 053504 H202 5-50 053505 H203 6-63 053506 H204 7-75 053507 H205 8-80 053508 H206 9-90 053509 H207 *10-100 053510 H4237 *11-110 053511 H4238 Features and Benefits For indoor and outdoor use. Seals the cable sheath to IP66/67/68. Specially formulated elastomeric seals. Wide sealing range. Precision manufactured from high quality brass (nickel plated) available in aluminium or stainless steel on request. Complete with high quality brass (nickel plated) locknuts and IP gasket or high temperature sealing gasket or o-ring. IPlus TM Corrosion Guard TM (For PVC SWA PVC Cable) Size 00-16ss 054600-16-IP H4239 00-20ss 054600-IP H4240 0-20s 0546-0-IP H2094 1-20 054601-IP H2095 2-25 054602-IP H2096 3-32 054603-IP H2097 4-40 054604-IP H2098 5-50 054605-IP H2099 6-63 054606-IP H4241 7-75 054607-IP H4242 Features and Benefits For highly corrosive and wet locations. Cable gland manufactured from high quality brass (nickel plated). The screw-on Corrosion Guard is manufactured from non-metallic material to protect the steel wire armour and metal arts of the gland from corrosion. Provides sealing on inner and outer sheath of the cable sealing to IP66/68. Corrosion guard screws onto the gland body and seals over the outer sheath of the cable giving an IP66/67/68 seal. Complete with high quality brass locknuts and polypropylene gasket. Posi-Flex TM Compression Gland TM (For Unarmoured Cable) Size 00-20ss 053800 H378 0-20s 0538-0 H377 1-20 053801 H379 2-25 053802 H380 3-32 053803 H381 4-40 053804 H382 Features and Benefits For use in highly corrosive areas. All brass parts encapsulated in a non-corrosive body. Wide sealing range. Complete with a fitted elastromeric seal to seal cable IP66/67/68. Supplied with a brass locknut and polypropylene gasket. Note: Longer lead times apply to items marked with a (*) in the sizes column and need to be confirmed at the time the order is placed. 98 2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.

GLANDS, BOXES AND SHROUDS D1W Captive Component Gland TM (For PVC SWA PVC Cable) Size 00-16ss 052000-16 H4244 00-20ss 052000 H4245 0-20s 0520-0 H4246 1-20 052001 H3228 2-25 052002 H3229 3-32 052003 H3230 4-40 052004 H3231 5-50 052005 H3232 6-63 052006 H3233 7-75 052007 H4247 8-80 052008 H4248 9-90 052009 H4249 Features and Benefits For indoor and outdoor use. Two piece handling, no loose parts. Freely rotating captive cone and cone ring, providing an armour clamp and earth bond without twisting the armour wire. Factory fitted captive elastromeric inner seal for ingress protection IP66/67/68. Seals on the inner sheath of the cable. Precision manufactured from high quality brass (nickel plated). Complete with polypropelyne sealing gasket. BarrierTex TM A Barrier Gland (For use with Unarmoured Cable) Size 00-20ss 052500 H4258 0-20s 0525-0 H4259 1-20 052501 H4260 2-25 052502 H4261 3-32 052503 H4262 4-40 052504 H4263 5-50 052505 H4264 6-63 052506 H4265 Features and Benefits Provides a barrier seal between the individual cores of the cables. Inspectable compound chamber and flameproof chamber. Prevents explosive gasses propagating through a cable. prevents gas and moisture migrating through a cable. Precision manufactured from high quality brass (electroless nickel plated) and stainless steel. BarrierTex TM F Barrier Gland (For Unarmoured Cable) Size 00-20ss 052600 H4243 0-20s 0526-0 H2539 1-20 052601 H4250 2-25 052602 H4251 3-32 052603 H4252 4-40 052604 H4253 5s-50s 052655 H4254 5-50 052605 H4255 6s-63s 052666 H4256 6-63 052606 H4257 Features and Benefits Provides a barrier seal between the individual cores of the cables. Inspectable compound chamber and flameproof chamber. Prevents explosive gasses propagating through a cable. prevents gas and moisture migrating through a cable. Precision manufactured from high quality brass (electroless nickel plated) and stainless steel. product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 99 3

GLANDS, BOXES AND SHROUDS Gland Size Reference Entry Thread Metic-NPT 'C' FLP Captive Component Gland (For MAC - Multi Armour Cable) 'D' Cable Details (Dia) Min-Max 'A' Max 'B' Max Length Hexagonal Details (Max) 'E' 'Flats' 'Crns' 0521-00 00-20ss 052100-16 15 3.0-8.0 16.0 46 25 28 H10208 0521-0 0-20s 052100 15 8.0-11.5 16.0 46 25 28 H217 052101 1-20 0521-0 15 11.5-14.0 19.0 48 30 34 H218 052102 2-25 052101 15 14.0-20.5 26.5 60 42 48 H219 052103 3-32 052102 15 20.5-26.5 33.0 76 47 54 H220 052104 4-40 052103 20 26.5-32.5 40.5 84 60 69 H221 052155 5-50s 052104 20 32.5-38.0 46.0 90 74 85 H10209 052105 5-50 052155 20 38.0-44.5 52.0 90 74 85 H222 052165 6-63s 052105 20 44.5-50.0 60.0 96 85 98 H10210 052106 6-63 052165 20 50.0-56.0 67.0 96 85 98 H223 Features and Benefits Two part handling, freely rotating captive cone for earth continuity and armour clamping. Factory fitted with a specially formulated elastromeric seal provides built-in safety. No loose parts that can get lost. Manufactured from high quality brass, nickel plated and stainless steel. Complete with an orange thread cap/safety gauge for correct gland selection. Gland Size Reference Entry Thread Metic-NPT 'C' 'D' FLP Hose Compression Gland Cable Details (Dia) Min-Max 'A' To Suit Hoze Size 'B' Hexagonal Details (Max) 'Flats' 'Crns' 0527-0 0-20s M20-½ 15 8.0-11.5 ½ - 13 25 28 H241 052701 1-20 M20-½/¾ 15 11.5-14.0 ¾ - 19 30 34 H3094 052702 2-25 M25-¾/1 15 14.0-20.5 1-25 42 48 H242 052703 3-32s M32-1/1¼ 15 20.0-26.5 1¼ - 32 47 54 H2544 052704 4-40 M40-1¼/1½ 20 26.5-32.5 1¼ - 38 60 69 H2545 Features and Benefits Fitted complete with a specially formulated elastromeric captive seal for built-in safety. Complete with a spigot to attache as hose for cable protection. Manufactured from high quality brass, nickel plated and stainless steel. Complete with an orange thread cap/safety gauge for correct gland selection. Gland Size Reference Entry Thread Metic-NPT 'C' FLP TR Compression Gland Cable Details Max. Length Hexagonal Details (Max) 'D' Min-Max 'A' 'E' 'Flats' 'Crns' 042400 00-20ss M20 15 3.5-8.5 57 25 28 H244 0524-0 0-20s M20 15 8.0-11.5 57 25 28 H243 052401 1-20 M20 15 11.5-14.0 59 30 34 H245 052402 2-25 M25 15 14.0-20.5 71 42 48 H246 052403 3-32 M32 15 20.5-26.5 87 47 54 H247 052404 4-40 M40 20 26.5-32.5 96 60 69 H248 052455 5s-50s M50 20 32.5-38.0 112 74 85 H10219 052405 5-50 M50 20 38.0-44.5 112 74 85 H249 052465 6s-63s M63 20 44.5-50.0 124 85 98 H10220 052406 6-63 M63 20 50.0-56.0 124 85 98 H250 Features and Benefits Fitted complete with a specially formulated elastromeric captive seal for built-in safety. No loose parts that can get lost. Provided with an extra hard gripper seal to grip cable. Manufactured from high quality brass, nickel plated and stainless steel. Complete with an orange thread cap/safety gauge for correct gland selection. 100 2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.

GLANDS, BOXES AND SHROUDS D1EX Captive Component Gland TM (For use with Unarmoured Cable) Size 00-16ss 051900-16 H4266 00-20ss 051900 H4267 0-20s 0519-0 H208 1-20 051901 H3227 2-25 051902 H3220 3-32 051903 H2720 4-40 051904 H2541 5-50 051905 H2542 6-63 051906 H4268 7-75 051907 H4269 8-80 051908 H4270 9-90 051909 H4271 10-100 051910 H4272 Features and Benefits For indoor and hazardous areas. Two part handling, no loose parts, freely rotating captice cone ring, providing armour clamp and earth bond without twisting the armour wires. Factory fitted with a specially formulated elastrometric seal for built-in safety, seals on the inner sheath of the cable. Precision manufactured from high quality brass (electrolesss nickel plated). Complete with polypropylene sealing gasket and an end cap/safety guage for correct gland selection. A2EX Compression Gland TM (For Unarmoured Cable) Size 00-16ss 053600-16 H4273 00-20ss 053600 H172 0-20s 0536-0 H171 1-20 053601 H173 2-25 053602 H174 3-32 053603 H175 4-40 053604 H176 5-50 053605 H177 6-63 053606 H3136 7-75 053607 H3092 Features and Benefits For indoor, outdoor and hazardous areas with unfilled hygroscopic multicore cables. Prevents gas and moisture transmitting down cable. Prevents explosive gasses transmitting down cables. Precision manufactured from high quality brass (electroless nickel plated). Ex Corrosion Guard TM Cable Gland (For use with Unarmoured Cable) Size 00-16ss 054700-16 H4274 00-20ss 054700 H4275 0-20s 0547-0 H209 1-20 054701 H210 2-25 054702 H211 3-32 054703 H212 4-40 054704 H213 5-50 054705 H214 6-63 054706 H215 7-75 054707 H216 8-80 054708 H4276 9-90 054709 H4277 10-100 054710 H4278 Features and Benefits Provides a barrier seal between the individual cores of the cables. Inspectable compound chamber. Prevents explosive gasses propagating through a cable. prevents gas and moisture migrating through a cable. Precision manufactured from high quality brass (electroless nickel plated) with screw on corrosion guard. product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 101 3

GLANDS, BOXES AND SHROUDS Posi Grip TM Compression Gland (For Unarmoured Cable) Size 00-20ss 054500 H225 0-20s 0545-0 H224 1-20 054501 H226 2-25 054502 H227 3-32 054503 H228 4-40 054504 H229 5-50 054505 H230 6-63 054506 H231 7-75 054507 H232 Features and Benefits For use in highly corrosive and hazardous areas. Brass parts are encapsulated in a non-corrosive body Complete with a hard gripper seal, deluge proof O-ring and elastomeric inner seal for complete ingress protection IP68. Complete with a polypropylene sealing gasket and an end cap/safety gauge for correct gland selection. Handi-Fit Box 4-Way / Y-Box (For PVC SWA PVC Cable) Size 4-Way 0 0650-0 H58 1 065001 H59 2 065002 H60 3 065003 H61 Y-Box 0 0651-0 H4279 1 065101 H55 2 065102 H56 3 065103 H57 Utility Box / Foundation Box (General Purpose Junction Box) Size Utility Box 20mm 102101 H63 25mm 102102 H64 Foundation Box 20mm 102401 H2821 25mm 102402 H3241 Roof Box Size 20mm 102700 H2252 Empty Posi Fit, Box 4-Way / Y-Box (Hazardous Area Junction Box) Size 4-Way 0 1003-0 H46 1 100301 H49 2 100302 H53 3 100303 H54 Y-Box 0 1009-0 H1425 1 100901 H2732 2 100902 H2483 3 100903 H2484 Features and Benefits Can be wired to your configuration for full creditation and certification 102 2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.

CABLE GLANDS BWR Rotary Cone Glands Benefits Sizes Features codew 0 H2742 Easy to install (rotary cone) Protects armour wire 1 H2743 2 3 4 5 Rotary cone. High quality nickel plating. To provide clamping of the armour wire for earth continuity and mechanical retention of the cable. May be used both indoors and outdoors. H2744 H2745 H2746 H2747 6 H2748 7 H2749 BWL Loose Cone Glands Benefits Sizes Features code 0 H2734 1 H2735 Easy to install (loose cone) Protects armour wire 2 3 4 5 Loose cone. High quality nickel plating. To provide clamping of the armour wire for earth continuity and mechanical retention of the cable. May be used both indoors and outdoors. H2736 H2737 H2738 H2739 6 H2740 7 H2741 A2 Compression Gland Benefits Sizes Features code 00 H2750 0 H2751 Easy to install (loose cone) Displacement seal concept ensures effective seal to the outer sheath 1 H2752 2 3 4 Novel seal design accomodates wide cable range. High quality nickel plating. May be used both indoors and outdoors. H2753 H2754 H2755 5 H2756 6 H2757 7 H2758 product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 103 3

GLAND ACCESSORIS Shrouds PVC Shroud Rubber Shroud Size Size 0 H2763 0 H10225 1 H2764 1 H2929 2 H2765 2 H2930 3 H2766 3 H2931 4 H2767 4 H2932 5 H2768 5 H2933 6 H2769 6 H10226 7 H2770 7 H10227 Earth Tags Slip-on Earth Tag Slip-Size Ø A Ø B ET0 0 20 6.8 H10228 ET1 1 20 6.8 H10229 ET2 2 25 6.8 H10230 ET3 3 32 6.8 H10231 ET4 4 40 6.8 H10232 ET5 5 50 10.5 H10233 ET6 6 63 10.5 H10234 ET7 7 75 10.5 H10235 104 2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.

UTILITY JUNCTION BOX Total Width Outside Hight Inside Height Gland Size Inside Width Fixing Hole A B C D E F G H 109 75 57 M20 94 122 96 6.9 H1451 135 85.5 69.5 M25 124 150 106 7 H10222 109 75 57 M20 94 122 96 6.9 H10223 135 85.5 59.5 M25 124 150 106 7 H10224 Dimensions Features and Benefits Manufacturedfrom high impact, corrosion and UVesistant material For use in general and industrial installations SABS 1222 IP66/68. (Dust and water tight) Allows for 1, 2, 3 and 4 way connections Blanking plugs, O-rings and lock nuts provided No need for drilling and tapping Internal earth plate provided (no exposed metal parts) Din rail mounting studs provided UJB1/2T - Special locking key to prevent unauthorised entry (optional) UBJ1/2C - UBJ1 with clear lid GLANDS PVC Glands your electrical connection Size Colour Gland 00/0/1 UNI: 3-in-1 White H960 Gland 00/0/1 UNI: 3-in-1 Black H961 Gland 00/0/1 UNI: 3-in-1 Push in H1116 Gland PVC 0 White - Screw H263 Gland PVC 1 White - Screw H265 Gland PVC 2 White H3237 product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 105 3

REDUCERS AND ADAPTORS Adaptors and Reducers Metric Reducers Size Thread M F RM025M020S M25 M20 H390 RM032M020S M32 M20 H393 RM032M025S M32 M25 H1773 RM040M020S M40 M20 H396 RM040M025S M40 M25 H398 RM040M032S M40 M32 H400 RM050M020S M50 M20 H402 RM050M025S M50 M25 H404 RM050M032S M50 M32 H406 RM050M040S M50 M40 H408 RM063M032S M63 M32 H410 RM063M040S M63 M40 H412 RM063M050S M63 M50 H414 Metric Adaptors Size M Thread F AM020M025S M20 M25 H10168 AM025M032S M25 M32 H2477 AM032M040S M32 M40 H10169 AM040M050S M40 M50 H10170 AM050M063S M50 M63 H10171 AM063M075S M63 M75 H10172 Ex Adaptors and Reducers Metric Reducers Size Thread M F RM025M020E M25 M20 H391 RM032M020E M32 M20 H394 RM032M025E M32 M25 H395 RM040M020E M40 M20 H397 RM040M025E M40 M25 H399 RM040M032E M40 M32 H401 RM050M020E M50 M20 H403 RM050M025E M50 M25 H405 RM050M032E M50 M32 H407 RM050M040E M50 M40 H409 RM063M032E M63 M32 H411 RM063M040E M63 M40 H413 RM063M050E M63 M50 H415 Metric Adaptors Size M Thread F AM020M025E M20 M25 H37 AM025M032E M25 M32 H2475 AM032M040E M32 M40 H10173 AM040M050E M40 M50 H2166 AM050M063E M50 M63 H10174 AM063M075E M63 M75 H10175 106 2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.

JOINT KITS Scotchcast Resin Joints In-Line Splices Min. Cable O.D Max. Cable O.D Cable Conductor Size (mm²) Scotchcast 82 Splicing Kits Scotchcast 82-A1 7 16 2,5-4 H277 Scotchcast 82-A2 14 28 6-16 H278 Scotchcast 82-A3 17 40 25-35 H279 Scotchcast 91 Splicing Kits Scotchcast 91-A1 8 28 4-10 H280 Scotchcast 91-A2 14 32 16-25 H281 Scotchcast 91-A3 23 39 35-50 H282 Scotchcast 91-A4 28 51 70 H283 Scotchcast 91-A4.5 30 55 95 H715 Scotchcast 91-A5 45 70 120-150 H284 Scotchcast 91-A6 48 86 185-240 H285 Electrical Insulating Resins Size Scotchcast Electrical Insulating Resins 4SA Epoxy Resin in Unipak Bag A/90cm³ H2810 4SA Epoxy Resin in Unipak Bag B/209cm³ H276 4SA Epoxy Resin in Unipak Bag C/418cm³ H3189 product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 107 3

JOINT KITS Flame Retardant Splicing Kits Low Tension Splicing Kits with Flame Retardant Mould and Flame Retardant non Halogenated Clear Epoxy Resin No. 52FR Size 91-A1/W 91-A2/W 91-A3/W 91-A4/W 91-A4,5/W 91-A5/W 91-A5/WE with Earthing Kit 91-A6/W (8mm - 28mm) 4-10mm² (14mm - 32mm) 16-25mm² (23mm - 39mm) 35-50mm² (28mm - 52mm) 70mm² (30mm - 55mm) 95mm² (45mm - 70mm) 120-150mm² (45mm - 70mm) 120-150mm² (48mm - 79mm) 185-240mm² H3102 H3103 H3104 H3106 H3105 H10427 H10428 H10429 MV Termination Kits Medium Voltage Cable Size Kit Reference 3 Core 11kV Heat Shrink Splicing Kits PILC 35-95 HPJ-1 H10395 PILC 120-185 HPJ-2 H10396 PILC 240-300 HPJ-3 H10397 XLPE 16-36 HXJ-1 H10398 XLPE 50-95 HXJ-2 H10399 XLPE 120-185 HXJ-3 H10400 XLPE 240-300 HXJ-4 H10401 Cable Size 3 Core 11kV Heat Shrink Splicing Kits Indoor (450, 750mm Tails) Outdoor (750, 1200, 1600mm Tails) Kit Reference Kit Reference PILC 35-95 HPTI-1 - HPTO-1 H10402 PILC 120-185 HPTI-2 - HPTO-2 H10403 PILC 240-300 HPTI-3 - HPTO-3 H10404 XLPE 16-36 HPTI-1 - HPTO-1 H10405 XLPE 50-95 HPTI-2 - HXTO-1 H10406 XLPE 120-185 HPTI-3 - HXTO-2 H10407 XLPE 240-300 HPTI-4 - HXTO-3 H10408 108 2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.

JOINT KITS Cable Tape Splicing Kits Cable Tape Splicing Kits Size (mm2) Scotchcast 6.6kV Cable Splicing Kits 92-A5 PILC Cable 16-50 H3108 92-A5X XLPE Cable 16-50 H10458 Scotchcast 11kV Cable Splicing Kits Poured Resin Joints, No. 460M Polyurethane 92-A11-6 PILC Cable 16-150 H3071 92-A11-X6 XLPE Cable 16-150 H1724 Low Voltage Cable Joint Information: Epoxy resins IEC / SANS approved your electrical connection Size GPJ0 1,5-4 H2802 GPJ1 4,0-10 H2803 GPJ2 10-16 H2804 GPJ2H 16-35 H290 GPJ3 35-50 H291 GPJ3H 50-95 H292 GPJ4 95-150 H293 GPJ5 150-240 H294 GPJ6 240-300 H4234 Duracast Resin Cable Joint Kits Size Dura Joint P0 - S 1.5-4 x 4C H268 Dura Joint P1 - S 4.0-10 x 4C H269 Dura Joint P2.5 - S 16-35 H270 Dura Joint P2 - S 10-16 x 4C H271 Dura Joint P3 - S 35-50 H273 Dura Joint P3.5 - S 50-95 H272 Dura Joint P4 - S 95-150 H274 Dura Joint P5 - S 150-240 H275 product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 109 3

LUGS AND FERRULES Copper Lugs for Stranded Conductor Cable Dimension 1. The nominal area of the circular stranded conductor is that of the nominal lug or ferrule size. 2. For flexible cables the next highest lug or ferrule size in relation to the area must be used. 3. For compacted cable the heavy duty lugs and ferrules must be used. C D F E Certain compacted cables vary in nominal diameter and cable diameter must be matched to the lug or ferrule barrel inside diameter. B A Typical Conductors Nominal Dimensions Nominal Lug Size Circular Stranded Flexible Stranded Stud Size Barrel Spade (mm 2 ) (mm 2 ) A B C D E F I.D O.D Length Length Hole Pos. Width 3 9,0 4,5 7,0 H10283 H964-4 12,0 4,5 7,0 H10284 H966 H2551 1,5 3/0,81 1 1,9 3,8 7,0 5 12,0 4,5 8,0 H10285 H967 H2552 6 13,0 5,5 9,0 H10286 H968 H2553 3 8,5 4,5 7,0 H10287 H969-4 12,0 4,5 7,0 H10288 H971 H2554 2,5 3/1,04 1,5 5 2,4 3,9 7,3 12,0 4,5 9,0 H10289 H972 H2555 6 13,0 5,5 9,5 H10290 H973 H2556 8 15,0 7,5 12,0 H10291 H975 H2557 3 9,0 4,5 7,0 H10292 H976-4 12,0 4,5 7,0 H10293 H977 H2559 5 8,0 12,0 4,5 8,5 H10294 H978 H2560 4 7/0,86 2,5 2,8 4,7 6 13,0 5,5 10,0 H10295 H979 H2561 8 17,0 6,5 13,0 H10296 H980 H2562 10 11,0 19,0 7,5 14,0 H10297 H981 H2563 4 12,0 4,5 7,5 H10298 H2857 H2564 5 12,0 4,5 8,5 H10299 H982 H2565 6 7/1,05 4 6 3,4 5,3 8,5 13,0 5,5 9,5 H10300 H983 H2566 8 9,3 17,0 7,0 13,0 H10301 H984 H2567 10 11,0 19,0 7,5 15,0 H10302 H985-5 10,5 12,0 4,5 9,0 H10303 H987 H2568 6 10,5 13,0 6,0 10,0 H10304 H988 H2569 10 7/1,36 6 8 4,4 6,3 11,0 17,0 7,5 13,0 H10305 H989 H2570 10 11,0 19,0 7,5 15,0 H10306 H990 H2571 12 12,0 20,0 10,0 19,0 H10307 H991 H2572 5 13,0 5,5 10,5 H10308 H993 H2574 6 13,0 5,5 11,0 H10309 H994 H2575 8 5,5 7,6 12,0 18,0 7,5 13,0 H10310 H995 H2576 16 7/1,72 10 10 20,0 7,5 15,0 H10311 H996 H2577 12 25,0 10,5 18,0 H10312 H997 H2578 16 27,0 13,0 24,0 H10313 H998 H2579 6 16,0 6,0 14,0 H10314 H999 H2581 18/1,35 8 17,0 8,0 14,0 H10315 H1000 H2582 25 16 10 6,9 9,0 15,0 18,0 8,0 16,0 H10316 H1001 H2583 19/1,55 12 21,0 11,0 18,0 H10475 H1002 H2584 16 27,0 13,0 24,0 H10317 H338 - Items above with (-) in the codes column are available on special request. Note: Indent compression recommended for flexible stranded. Confirm stock and brand availability with your local branch. Components are tested to IEC 61238-1. 110 2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.

LUGS AND FERRULES Copper Lugs for Stranded Conductor Cable Nominal Lug Size Typical Conductors Circular Stranded Flexible Stranded Stud Size Barrel Nominal Dimensions Spade (mm 2 ) (mm 2 ) 35 18/1,59 19/1,55 50 18/1,9 19/1,85 70 95 120 150 185 240 300 18/2,25 19/2,19 36/1,86 37/1,83 36/2,08 37/2,05 36/2,34 37/2,29 36/2,59 37/2,53 60/2,23 61/2,26 60/2,55 61/2,53 Items above with (-) in the codes column are available on special request. Note: Indent compression recommended for flexible stranded. Confirm stock and brand availability with your local branch. Components are tested to IEC 61238-1. 25 35 50 70 70/95 95/120 120/150 150/185 185/240 A B C D E F I.D O.D Length Length 400 91/2,39 240/300 16 27,5 35,6 41,0 Hole Pos. Width 6 15,0 18,0 8,0 16,0 H10318 H1003 H2585 8 15,0 18,0 9,0 16,0 H10319 H1004 H2586 10 8,2 10,7 15,0 18,0 9,0 16,0 H10320 H1005 H2587 12 15,0 22,0 10,0 18,0 - H1006 H2588 16 16,0 30,0 13,0 24,0 H10321 H1007 H2589 6 16,0 17,0 8,0 18,0 H10322 H1008 H2590 8 16,0 17,0 9,0 18,0 H10323 H1009 H2591 10 17,0 24,0 10,0 20,0 H10324 H1010 H2592 12 10,0 12,8 18,0 24,0 10,0 20,0 - H1012 H2593 16 18,0 30,0 13,0 26,0 H10325 H1013 H2594 20 18,0 30,0 13,0 26,0 H10326 H3266-8 20,5 20,0 9,5 21,0 H10327 H1014 H2597 10 21,0 26,0 11,0 22,0 H10328 H1015 H2598 12 11,7 15,0 21,0 28,0 12,0 22,0 H10329 H1017 H2599 16 22,0 32,0 14,0 28,0 - H1018 H1342 20 22,0 34,0 15,0 30,0 H10330 H1175 H2600 8 24,0 9,5 25,0 H10331 H1019 H2601 10 26,0 13,0 26,0 H10332 H1020 H2602 12 13,5 17,4 23,0 28,0 13,0 26,0 H10333 H1022 H2603 16 32,0 14,0 28,0 - H1023 H2604 20 36,0 16,0 30,0 H10334 H1176 H2605 10 26,0 12,0 27,0 H10335 H1024 H2606 12 28,0 12,0 28,0 H10336 H1025 H2607 16 15,5 19,8 26,0 32,0 14,0 30,0 H10337 H1026 H2608 20 36,0 16,0 32,0 H10338 H2861-10 31,0 12,5 31,0 H10339 H1027 H2609 12 33,0 16,0 32,0 H10340 H1028 H2610 16 17,0 22,0 27,0 35,0 16,0 32,0 H10341 H1029 H1343 20 36,0 16,0 32,0 H10342 H1030 H2661 10 29,0 12,5 34,0 H10343 H1031 H2611 12 31,0 16,0 34,0 H10344 H1032 H2612 16 19,0 24,4 29,0 34,0 16,0 36,0 H10345 H1033 H2613 20 H10346 H1179-10 36,0 16,0 40,0 H10347 H1180 H2614 12 36,0 16,0 40,0 H10348 H1034 H2615 16 21,5 27,7 33,0 38,0 20,0 40,0 H10349 H1884 H2616 20 42,0 20,0 40,0 H10350 H3267 H2617 10 35,0 15,0 45,0 H10351 H3268-12 24,5 31,3 35,0 35,0 15,0 45,0 H10352 H1289 H2618 16 45,0 15,0 45,0 H10353 H367-20 45,0 16,0 45,0 H10354 H2863 H2619 47,0 49,0 - H4281-47,0 24,0 51,0 - H4280 H368 500 91/2,67 300/400 31,6 40,0 41,5 54,0 58,0 H369 H4282-630 127/2,54 400/500 34,5 44,6 53,0 65,0 64,0 H370 H4283-800 127/2,87 630 40,0 51,2 68,0 75,0 73,0 - H4284-1000 127/3,22 44,0 56,6 75,0 75,0 81,0 - H4285 - product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 111 3

LUGS AND FERRULES Heavy Duty Copper Lugs for Compacted XLPE Cable 6.35-11kV F C R1 D E B A Nominal Dimensions Nominal Lug Size (mm 2 ) SANS 1411-1 Nominal Diameter Over Cond. Stud Size Barrel Spade A B C D E F I.D O.D Length Length Hole Pos. Width 35 7,0 10 7,30 10,50 16,0 24,0 11,0 19,0 H4130 50 8,2 10 8,75 12,30 20,0 24,0 11,0 19,0 H4131 70 9,7 10 10,40 14,60 21,0 27,0 14,0 20,0 H4132 95 11,4 10 12,10 17,00 24,0 28,0 14,0 24,0 H4133 120 12,6 12 14,00 19,10 26,0 28,0 14,0 26,0 H4134 150 14,6 12 15,25 21,30 31,0 37,0 18,0 30,0 H4135 185 15,9 12 17,00 23,70 34,0 40,0 19,0 33,0 H4136 240 16,3 12 20,00 27,10 34,0 41,0 19,0 37,0 H4137 300 20,8 * 21,63 30,50 38,0 48,0 20,0 42,5 H4138 400 23,6 * 24,50 34,64 51,0 49,0 23,5 48,0 H4139 500 26,2 * 28,50 38,90 51,0 52,0 25,0 54,0 H4140 630 30,3 * 33,00 45,00 53,0 65,0 28,0 64,0 H4141 Note: * Stud sizes can be made to customer requirements. Components are tested to IEC 61238-1. 112 2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.

LUGS AND FERRULES Aluminium Stranded Circular Cable Lugs Cable Stud SIze A B C D E Palm width Palm Thick (mm 2 ) "F" "G" d1 d2 25 35 50 70 95 120 150 185 8 8,40 H4158 15,00 4,00 10 65,00 28,00 10,40 17,00 12,00 7,00 11,30 H4159 12 12,50 21,00 3,00 H4160 8 8,40 H4161 17,50 4,00 10 70,00 30,00 10,40 17,00 12,00 8,30 12,90 H4162 12 12,50 21,00 3,50 H4163 10 10,40 H4164 20,00 4,50 12 70,0 32,00 12,50 17,00 12,00 9,90 14,70 H4165 16 16,50 26,00 3,50 H4166 10 10,40 H4167 23,00 5,00 12 78,00 36,00 12,50 17,00 12,00 11,70 17,00 H4168 16 16,50 26,00 4,50 H4169 10 10,40 12 85,00 39,00 12,50 18,00 12,00 27,50 5,50 13,70 19,70 H4171 16 16,50 H4172 10 10,40 12 89,00 45,00 12,50 17,00 12,00 31,00 6,50 15,30 22,20 H4174 16 16,50 H4175 12 12,50 16 100,00 48,00 16,50 20,00 16,00 34,50 7,00 17,20 24,70 H4177 20 20,50 H4178 12 12,50 16 108,00 53,00 16,50 20,00 16,00 38,00 7,50 19,00 27,30 H4180 20 20,50 H4181 240 118,00 57,00 22,00 18,00 43,50 8,50 21,80 31,00 H4182 On request On request 300 132,00 62,00 25,00 20,00 49,00 9,50 24,90 35,00 H4183 Note: Components are tested to IEC 61238-1. H4170 H4173 H4176 H4179 product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 113 3

LUGS AND FERRULES Aluminium 3 Core Sector Shaped Cable Lugs Cable Stud SIze Palm A B C D E width Palm Thick (mm 2 ) "F" "G" d1 d2 25 35 50 70 95 120 150 185 8 8,40 H4184 15,00 4,00 10 65,00 28,00 10,40 17,00 12,00 5,20 8,73 H4185 12 12,50 21,00 3,00 H4186 8 8,40 H4187 17,50 4,5 10 70,00 30,00 10,40 17,00 12,00 5,90 10,05 H4188 12 12,50 21,00 3,50 H4189 10 10,40 H4190 22,00 4,50 12 70,00 32,00 12,50 17,00 12,00 7,25 11,85 H4191 16 16,50 26,00 3,50 H4192 10 10,40 H4193 24,00 5,00 12 78,00 36,00 12,50 17,00 12,00 8,5 14,10 H4194 16 16,50 26,00 4,50 H4195 10 12 82,00 38,00 12,50 18,00 12,00 28,00 6,00 9,55 16,35 H4197 Note: Components are tested to IEC 61238-1. 10,40 16 16,50 H4198 10 10,40 12 88,00 45,00 12,50 17,00 12,00 31,00 6,50 11,05 18,50 H4200 16 16,50 H4201 12 12,50 16 103,00 48,00 16,50 20,00 18,00 34,00 7,00 12,15 20,60 H4203 20 20,50 H4204 12 12,50 16 106,00 53,00 16,50 20,00 18,00 38,00 8,50 13,40 22,48 H4206 20 20,50 H4207 240 118,00 57,00 22,00 18,00 43,50 8,50 15,55 26,05 H4208 On request On request 300 132,00 62,00 25,00 20,00 49,00 10,00 17,35 29,00 H4209 H4196 H4199 H4202 H4205 114 2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.

LUGS AND FERRULES Aluminium 4 Core Sector Shaped Cable Lugs Cable Stud SIze A B C D E Palm width Palm Thick (mm 2 ) "F" "G" d1 d2 25 35 50 70 95 120 150 185 8 8,40 H4210 15,00 4,00 10 65,00 25,00 10,40 17,00 12,00 5,80 7,88 H4211 12 12,50 21,00 3,00 H4212 8 8,40 H4213 17,50 4,5 10 70,00 30,00 10,40 17,00 12,00 7,10 9,70 H4214 12 12,50 21,00 3,50 H4215 10 10,40 H4216 20,00 4,50 12 70,00 32,00 12,50 17,00 12,00 8,35 10,95 H4217 16 16,50 26,00 3,00 H4218 10 10,40 H4219 23,00 5,00 12 78,00 36,00 12,50 17,00 12,00 9,30 13,00 H4220 16 16,50 26,00 4,50 H4221 10 10,40 12 85,00 39,00 12,50 18,00 12,00 27,50 5,70 10,85 15,10 H1021 16 16,50 H4222 10 10,40 12 89,00 45,00 12,50 17,00 12,00 31,00 6,50 12,05 17,00 H4224 16 16,50 H4225 12 12,50 16 100,00 48,00 16,50 20,00 16,00 34,50 7,20 13,80 18,80 H4227 20 20,50 H4228 12 12,50 16 108,00 53,00 16,50 20,00 16,00 38,50 8,00 15,25 21,00 H4229 20 20,50 H4230 240 118,00 57,00 22,00 18,00 43,50 8,50 17,35 23,80 H4231 On request On request 300 132,00 62,00 25,00 20,00 49,00 9,70 19,50 26,40 H4232 Note: Components are tested to IEC 61238-1. H353 H4223 H4226 H363 product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 115 3

LUGS AND FERRULES Copper Ferrules for Stranded Conductor Cable C B A Nominal Sleeve Size Nominal Dimensions I.D O.D Length Typical Conductors Circular Stranded (mm 2 ) A B C 1,5 1,9 3,6 13,0 3/0,81 H10367 H121 H2514 2,5 2,4 3,9 14,0 3/1,04 H10368 H124 H2515 4 2,8 4,7 16,0 7/0,86 H10369 H126 H2516 6 3,4 5,3 18,0 7/1,05 H10370 H129 H2517 10 4,4 6,3 20,0 7/1,36 H10371 H131 H2518 16 5,5 7,6 22,0 7/1,72 H10372 H133 H2519 25 6,9 9,0 25,0 18/1,35 H2174 H137 H2520 35 8,2 10,7 28,0 18/1,59 H2175 H141 H2521 50 10,0 12,8 31,0 18/1,90 H2176 H144 H2522 70 11,7 15,0 35,0 18/2,25 H23 H147 H2523 95 13,5 17,4 39,0 36/1,86 H2928 H151 H2524 120 15,5 19,8 43,0 36/2,08 H2177 H155 H2525 150 17,0 22,0 48,0 36/2,34 H2178 H159 H2526 185 19,0 24,4 54,0 36/2,59 H10373 H162 H2527 240 21,5 27,7 60,0 60/2,23 H10374 H165 H2528 300 24,5 31,3 67,0 60/2,55 H10375 H167 H2529 400 27,5 35,6 80,0 91/2,39 H10376 H3265 H2530 500 31,6 40,0 90,0 91/2,67 H10377 H4154-630 34,5 44,6 110,0 127/2,54 H10378 H4155-800 40,0 51,2 130,0 127/2,87 H10379 H4156-1000 44,0 56,6 154,0 127/3,22 H10380 H4157 - Heavy Duty Copper Ferrules for Compacted XLPE Cable 6.35-11kV Nominal Dimensions Nominal Ferrule Size I.D O.D Length (mm 2 ) A B C 35 7,30 10,5 38 H4142 50 8,75 12,3 42 H4143 70 10,40 14,6 43 H4144 95 12,10 17,0 45 H4145 120 14,00 19,1 55 H4146 150 15,25 21,3 58 H4147 185 17,00 23,7 64 H4148 240 20,00 27,1 70 H4149 300 21,63 30,5 75 H4150 400 24,50 34,6 80 H4151 500 28,50 38,9 90 H4152 630 33,00 45,0 100 H4153 For items marked with a dash (-) please enquire at branch or reference website Note: Components are tested to IEC 61238-1. 116 2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.

LUGS AND FERRULES Aluminium Ferrules A Stranded 3 Core 4 Core Cable (mm 2 ) A D1 Stranded 3 Core 4 Core D2 H W 25 66 7,00 11,30 H135 5,20 8,73 H4286 5,8 7,88 H4296 35 70 8,30 12,90 H139 10,05 5,90 H4287 7,10 9,70 H4297 50 74 9,90 14,70 H142 11,85 7,25 H4288 8,35 10,95 H4298 70 78 11,70 17,00 H145 14,10 8,25 H4289 9,30 13,00 H4299 95 84 13,70 19,70 H149 16,35 9,55 H4290 10,85 15,10 H4300 120 91 15,30 22,20 H153 18,50 11,05 H4291 12,50 17,00 H4301 150 102 17,20 24,70 H157 20,60 12,15 H4292 13,80 18,80 H4302 185 108 19,00 27,30 H160 22,40 13,40 H4293 15,25 21,00 H4303 240 118 21,80 31,00 H163 26,05 15,55 H4294 17,35 23,80 H4304 300 130 24,90 35,00 H4233 29,00 17,35 H4295 19,50 26,40 H4305 Note: Components are tested to IEC 61238-1. H W product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 117 3

PRE-INSULATED TERMINALS Insulated Ring Terminals W 1R3 Wire Range Stud Size Dimensions Colour (mm2) W L F 3,2 5,5 17,5 5,0 H526 1R4 4,3 8,0 20,5 7,0 H527 1R5 5,3 8,0 20,5 7,0 H528 0,25-1,65 Red 1R6 6,4 11,6 26,8 11,0 H529 1R8 8,4 11,6 26,8 11,0 H530 1R10 10,5 13,6 30,5 13,9 H525 F L 2R35 3,7 6,6 17,8 6,6 H532 2R4 4,3 8,5 21,8 8,5 H533 2R5 5,3 9,5 21,8 9,5 H534 1,04-2,63 Blue 2R6 6,4 12,0 26,8 11,0 H535 2R8 8,4 12,0 26,8 11,0 H536 2R10 10,5 13,6 30,5 13,9 H531 3R35 3,7 7,2 22,7 6,1 H539 3R4 4,3 9,5 26,6 9,1 H540 3R5 5,3 9,5 26,6 9,1 H541 3R6 2,63-6,64 Yellow 6,4 12,0 29,5 10,5 H542 3R8 8,4 15,0 34,0 13,5 H543 3R10 10,5 15,0 34,0 13,5 H537 3R12 12,0 19,2 38,6 16,0 H538 Insulated Spade Terminals W 1S35 Wire Range Stud Size Dimensions Colour (mm2) W L F 3,7 6,4 21,0 6,5 H306 F 1S4A 4,3 6,4 21,0 6,5 H307 0,25-1,65 Red 1S5A 5,3 8,1 21,0 6,5 H308 1S6A 6,4 9,5 21,0 6,5 H309 L 2S35 3,7 6,0 21,0 6,5 H310 2S4A 4,3 6,4 21,0 6,5 H311 1,04-2,63 Blue 2S5A 5,3 7,9 21,0 6,5 H312 2S6A 6,4 9,3 21,0 6,5 H313 3S4A 4,3 8,3 25,5 7,0 H314 3S5 2,63-6,64 Yellow 5,3 9,0 25,5 7,0 H315 3S6A 6,4 9,0 25,5 7,0 H316 Insulated Pin Terminals W Wire Range Dimensions Colour (mm2) W L F F 1P10 0,25-1,65 Red 1,9 19,8 10,0 H371 L 2P10 1,04-2,63 Blue 1,9 19,8 10,0 H372 2P12 1,9 21,8 12,0 H1035 3P13 2,63-6,64 Yellow 2,8 27,0 13,0 H373 Note: Lead times need to be confirmed at the time the order is placed. 0,5-1,5mm2-19Amp 600V 1,5-2,5mm2-27Amp 600V 4,0-6,0mm2-48Amp 600V 118 2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.

PRE-INSULATED TERMINALS Insulated Ferrules C Wire Range Dimensions Colour (mm2) D C L 1UT 0,25-1,65 Red 4,0 1,7 24,6 H120 L 2UT 1,04-2,63 Blue 4,5 2,3 24,6 H123 D 3UT 2,63-6,64 Yellow 6,3 3,4 26,5 H128 Insulated Blade Terminals F W W L 1FB10 Wire Range Dimensions Colour (mm2) W L F 2,3 19,8 10,0 H512 1FB11 3,0 20,8 11,0 H513 0,25-1,65 Red 1FB14 3,0 23,8 14,0 H514 1FB18 2,2 27,8 18,0 H515 2FB9 2,8 18,8 9,0 H516 1,04-2,63 Blue 2FB18 2,2 27,8 18,0 H517 3FB10 2,8 23,0 10,0 H519 2,63-6,64 Yellow 3FB14 4,5 27,0 14,0 H520 Insulated Hook Blade Terminals W Wire Range Dimensions Colour (mm2) W L F F 1HB3 3,0 27,2 16,8 H522 0,25-1,65 Red 1HB 4,6 27,2 16,8 H521 L 2HB 1,04-2,63 Blue 4,6 27,2 16,8 H523 3HB 2,63-6,64 Yellow 4,6 30,2 17,2 H524 Insulated Male Disconnects F F W W L L Wire Range Dimensions Colour (mm2) W L F 1DM4 4,8 19 6,5 A8478 0,25-1,65 Red 1DM 6,35 21 7,7 H504 2DM4 4,8 10 6,5 H9960 1,04-2,63 Blue 2DM 6,35 21 7,7 H508 3DM 2,63-6,64 Yellow 6,35 24 7,7 H511 Note: Lead times need to be confirmed at the time the order is placed. product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 119 3

PRE-INSULATED TERMINALS Insulated Female Disconnects F W 1DF2 Wire Range Dimensions Colour (mm2) W L F 3,2 18,6 6,5 H503 1DF4 0,25-1,65 Red 5,0 19,0 6,4 H10249 L 1DF 6,6 20,5 7,3 H502 2DF4 5,0 19,0 6,4 H507 2DF 1,04-2,63 Blue 6,6 20,5 7,3 H506 2DF9 10,0 25,5 12,0 H10250 3DF 6,6 23,5 7,3 H510 2,63-6,64 Yellow 3DF9 10,0 28,5 12,0 H10251 Fully Insulated Female Disconnects W F F1DF2 Wire Range Dimensions Colour (mm2) W L F 3,8 19,0 6,4 H10252 F1DF4 0,25-1,65 Red 5,0 19,3 6,4 H10253 L F1DF 6,6 22,0 7,3 H10254 F2DF4 5,0 19,3 6,4 H10255 1,04-2,63 Blue F2DF 6,6 22,0 7,3 H10256 F3DF 6,6 24,0 7,3 H10257 2,63-6,64 Yellow F3DF9 10,0 28,5 12,0 H10258 Insulated Piggy Back Disconnects W F Wire Range Dimensions Colour (mm2) W L F L 1PB 0,25-1,65 Red 6.6 22.0 8.0 H2330 2PB 1,04-2,63 Blue 6.6 22.0 8.0 H2329 Insulated Male Bullet Disconnects W Wire Range Dimensions Colour (mm2) W L F F 1ULM4 0,25-1,65 Red 4,0 21,5 8,5 H2303 L 2ULM4 1,04-2,63 Blue 4,0 21,5 8,5 H2305 3ULM4 4,0 24,0 8,5-2,63-6,64 Yellow 3ULM5 5,0 24,0 8,5 H9449 Items above with (-) in the codes column are available on special request. Note: Lead times need to be confirmed at the time the order is placed. 1202 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.

PRE-INSULATED TERMINALS Insulated Female Bullet Disconnects W Wire Range Dimensions Colour (mm2) W L F F 1ULF4 0,25-1,65 Red 3,9 21,5 7,3 H2302 L 2ULF4 3,9 25,5 7,3 H2304 1,04-2,63 Blue 2ULF5 5,9 25,5 7,0-3ULF4 2,63-6,64 Yellow 4,9 24,5 7,0 H9491 0.5-1,5mm2-19Amp 600V 1.5-2,5mm2-27Amp 600V 4-6mm2-48Amp 600V Quick Splice Connectors Wire Range Dimensions Colour (mm2) W L 1QS 0,25 Red 20,0 27,0 H387 W L 2QS 2,0 Blue 20,0 27,0 H388 3QS 5,5 Yellow 20,5 34,5 H74 Insulated Female Disconnects E - Insulated D C D C Wire Range Dimensions (mm2) Colour L F W B C D E0510 0.5 White 10.0 16.0 2.6 6.0 1.0 1.3 H111 E0710 0.75 Blue 10.0 16.3 3.0 6.3 1.2 1.5 H112 L L E01010 1.0 Red 10.0 16.3 3.0 6.3 1.4 1.7 H113 F F E01510 1.5 Black 10.0 16.4 3.5 6.3 2.0 1.7 H114 W E02512 2.5 Grey 12.0 19.4 4.0 7.4 2.3 2.6 H116 E4012 4.0 Orange 12.0 19.4 4.5 7.4 2.8 3.2 H117 B W BW E6012 6.0 Green 12.0 20.5 6.0 8.5 3.5 3.9 H118 E10012 10.0 Brown 12.0 20.8 7.5 8.8 4.5 4.9 H10261 Items above with (-) in the codes column are available on special request. Note: Lead times need to be confirmed at the time the order is placed. product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 121 3

BRASS TERMINALS Uninsulated Disconnect - Female C Wire Range Dimensions (mm2) L C W W UDF 19.0 7.5 6.6 H3078 L 0.5-2.0 UDF 2 16.0 6.4 3.2 H9908 Uninsulated Disconnect - Male C Wire Range Dimensions (mm2) L C W W L UDM 0.5-2.0 20.0 7.5 6.3 H7479 Note: Lead times need to be confirmed at the time the order is placed. PRE-INSULATED TERMINALS Pre-packs Description Quantity of Each Component Content K150T Pre-Insulated Terminal Kit complete with Crimping Tool 10/5 1R4, 2R4, 2R5, 1S35, 2S35, 1UT, 2UT, 3R5, 3S5, 3UT, 1DF, 2DF, 1DM, 2DM O2001 YL2001 (Crimping Tool) K175 Pre-Insulated Terminal Kit 15/10/5 2R35A, 1UT, 2UT, 1DF, 2DF, 1DM, 2DM, 1R4, 1R5, 2R4, 2R5, 1S35, 3UT, 3R5 H10281 K300 Pre-Insulated Terminal Kit 25/20/15/10/5 1R4, 1R5, 1S35, 2R4, 1DF, 2DF, 1DM, 2DM, 2R35A, 2R5, 1UT, 2UT, 3R5, 3R6, 3UT H10282 1222 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.

PRE-INSULATED TERMINALS Pre-Packs Wall mounted stand comprising of 10 packs of 43 most popular types of terminals, which includes an Assortment Pack (PRPK28) and a Tool Kit (Crimper + Assortment Pack PRPK 29) of terminals. Ideal for electricians and handymen. Wire Range Qty Per Pack 1R6 0.34-1.57 10 H963 1R5-10 H1154 1R4-10 H1161 2R6 1.17-3.24 8 H1167 2R5-10 H1169 2R4-10 H1246 3R8 2.5-6.0 6 H1247 3R6-6 H1170 3R5-6 H1249 1S35 0.34-1.57 10 H1144 1S4A - 10 H1145 2S35 1.17-3.24 10 H1146 2S5A - 10 H1147 1P10 0.34-1.57 10 H1148 2P12 1.17-3.24 10-1UT 0.34-1.57 10 H1150 2UT 1.17-3.24 8 H1151 1DM 0.34-1.57 10 H1152 2DM 1.17-3.24 10 H1153 1DF 0.34-1.57 10 H1155 2DF 1.17-3.24 10 H1156 1PB 0.34-1.57 10 H1369 2PB 1.17-3.24 6 H1370 1ULM4 0.34-1.57 8 H1157 2ULM4 1.17-3.24 8 H1158 1ULF 0.34-1.57 8 H1159 2 ULF 1.17-3.24 8 H1160 Lug Pre Pack Assorted H1241 1S5A 0.34-1.57 10 H1162 2S4A 1.17-3.24 10 H1163 1DF2 0.34-1.57 10 H1320 1DF4-10 H1164 2DF4 1.17-3.24 10 H1321 3DF 2.5-6.0 8 H1165 3DM - 8 H1166 3DF9-5 H1242 F1DFY 0.34-1.57 5 H1371 F2DFY 1.17-3.24 5 H1243 3UT 2.5-6.0 6 H1168 3R10-5 H1245 Items above with (-) in the codes column are available on special request. product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 123 3

3M TAPES Vinyl Electrical Tapes Name Description Thickness Temperature Rating Applications Sizes ( C) Scotch Super 33+ Premium Vinyl Electrical Tape Highly conformable in all weather applications. Resists UV rays, abrasion,corrosion, alkalis acids. Flame retardant UL listed. CSA callsified. 0,18 105 C Primary insulation for splices up to 600V. Protective jacketing. 19mm x 20m H1420 H477 Scotch 35 Colour Coding Tape 9 Fade resistant colours, excellet insulating properties. Resists UV rays, abrasion, corrosion, alkalis & acids 0.18 105 C Phase indintification & marking. Harnessing. 19mm x 20m H478 H479 H480 H481 Scotch 22 Heavy Duty Vinyl Electrical Tape Thicker for increased mechanical strength, abrasion resistant. UL listed. CSA certified. Electrical insulating 0,25mm 105 C Primary insulation for splices up to 600V. Protective jacketing. 24mm x 30m 36mm x 30m H1432 H471 9mm x 6m - 3M 33 Vinyl Electrical Tape Spcification grade vinyl insulation tape. Flame retardant 0.18 80 C Primary insulation for splices up to 600V. Protective jacketing. 18mm x 6m - 18mm x 20mm H1420 H1202 H1203 Scotch 1710 Vinyl Electrical Tape A good quality electrical vinyl insulating tape. Flame retardant. SABS122 specified 0.18 80 C Protective jacketing. Harnessing. 18mm x 20m H1204 H1205 H1206 H1207 Corrosion Protection Tapes Name Description Thickness Temperature Rating Applications Sizes ( C) Scotchwrap 50&51 All weather Corrosion Protection Tape All weather performances & resistance. Resistant to impact & abrasions. 0,25 80 C Corrosion protection on pipes, conduits, joints, etc. Various x 30m H2625 0,5 H482 Speciality Tapes Name Description Thickness Temperature Rating Applications Sizes ( C) 12mm x 20m H1306 Scotch 27 Glass Cloth Tape Woven insulating glass cloth. High temperature resistance. High mechanical strength. UL recognised. 0.18mm 27 is Class B temp 130 C Heat-stable insulation for furnace & oven controls, motor leads & switches 19mm x 20m 12mm x 55m H1307 H2670 25mm x 55m H2671 Items above with (-) in the codes column are available on special request. 1242 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.

3M TAPES Insulating and Splicing Tapes Name Description Thickness Temperature Rating Applications Sizes ( C) Scotch 13 Semi- Conducting Tape Rubber tape, Semi-conductive. Compatible with cable semi-conductive jackets. 0,76 continuous: 90 C short term: 130 C Electrically round high voltage connections. Provides cable shield continuation. 18mm x 4,5m H1200 18mm x 9m H472 Scotch 23 Self-Fusing Rubber Tape High & low voltage insulating, self-fusing rubber tape. 0,76 continuous: 90 C short term: 130 C Primary electrical insulation for splicing all solid dielectric cables through 69kV. 24mm x 9m H10193 Scotch 24 Shielding Tape All metal open weave shielding braid, conformable, temperature stable. Continued electrostatic shielding across splice. 25mm x 4,5m H10194 12mm x 4,5m H10195 Scotch 25 & 26 Grounding Braid All metal woven braid. High current carrying capacity of 12mm 2 wire. Solderable Gorunding of HV splices & terminations. 25mm x 5m H2669 Scotch 70 Self-Fusing Silicone Rubber Tape Arc & tracking resistant self-fusing, long lasting silicone rubber. 0,3mm 180 C Protective over-wrap for terminating high voltage cables. 24mm x 9m H483 Scotchfil Electrical Insulation Putty Black, self-fusing, insulating putty in tape form 3,2mm 80 C Insulate bus bars, motor lead (re-entry) service drop connections. 38mm x 1,5m H2621 product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 125 3

3M TAPES 3M Tape Applications Scotch Super 33+ Vinyl Electrical Tape Scotch Super 33+ Vinyl Electrical Tape is a black 0.18mm is a premium grade all-weather vinyl electrical insulating tape with an aggressive adhesive and elastic backing that enables it to easily conform to irregular surfaces for water resistant electrical and mechanical protection. Scotch Super 33+ is highly conformable and super stretchy in all weather applications. This tape provides flexibility and easy handling for all round performances in cold to -18 C and is designed to perform in a continuous temperature environment up to 105 C. Scotch 35 Vinyl Electrical Tape Scotch 35 Vinyl Electrical Tape 0.18mm is a premium grade electrical vinyl tape which stretches to conform to virtually any shape which requires colour-coded insulation. Available in nine fade resistant colours. Scotch 35 Vinyl Electrical Colour Coding Tape is used in phase identification, colour coding leads and piping systems and for marking safety areas. This tape is abrasion-and weather-resistant, with excellent mechanical and electrical insulation properties which wraps smoothly and holds tight over a wide range of temperatures. Flame-retardant and excellent all-weather performance in cold to -18 C or hot to 105 C. Scotch 22 Vinyl Insulation Tape Scotch 22 Vinyl Insulation Tape is a black 0.25mm tape and one of 3M s thickest vinyl electrical tapes. It seals in all kinds of weather and provides moisture-tight electrical and mechanical protection with fewer wraps than thinner tapes. Scotch 22 Heavy Duty Vinyl Insulation Tape is designed for heavy duty insulation applications that require greater mechanical strength and abrasion resistance. UL listed for use as electrical insulation up to 600 volts and 80 C. UL 510 is flame-retardent. 1262 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.

NITTO INSULATION TAPE Insulation Tape Thickness Width Length )mm( )mm( )mm( Colour Heavy Duty Red H459 Green H458 0.2 18 20 Blue Yellow H457 H462 Black H456 White H460 Light Duty Red H2664 Green H2663 0.13 19 20 Blue Yellow H4312 H2666 Black H3272 White H2665 Tapes Size Barrier Tape W H L 75 75 500 H485 Detector Tape 75 150 500 H484 Skull and crossbones Danger Tape 75 150 500 H1208 Danger sign product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 127 3

CABLE TIES AND STRAPPING Hellerman Cable Tie Chart T18R T30R T50R T50I T50L T12OS T12OR LK5BK 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 360 370 380 390 400 410 420 430 440 450 460 470 480 490 500 510 520 530 540 mm Min. Tensile Strenght (N) Nylon Nylon Cable Ties Bundle Lenght Width Cradles Length Width Height Cable Tie Width Black White Black White T18R 80 22 100 2.5 H575 H579 TY3 20 14 4.5 Up to 3.5 H445 H443 TY8 32 25 6.0 Up to 7.5 H1984 H1983 T30R 135 35 150 3.5 H585 H588 T50R 225 50 200 4.6 H608 H612 T50I 225 85 300 4.6 H594 H598 T50L 225 110 390 4.6 H604 H606 T12OS 535 55 225 7.6 O206 H612 T12OR 535 105 390 7.6 H618 H619 LK5BK 1115 150 535 13.2 H574 - Items above with (-) in the codes column are available on special request. 1282 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.

CABLE TIES AND STRAPPING Release Cable Ties HT L x W Average Tensile Strength Maximum Cable Bundle Diameter REL100 100 x 6.5 26 21 H10476 REL140 145 x 7.5 30 35 H10477 REL150 770 x 8.8 100 225 H10478 REL250 250 x 7.5 30 68 H10479 SOFTXXL 880 x 28 35 H10480 SOFTXL 580 x 28 35 H10481 SOFTL 340 x 11 12 H10482 SOFTM 260 x 11 12 H10483 SOFTS 260 x 7 5 H10484 SOFTXS 180 x 7 5 H10485 Stainless Steel Cable Ties HT L x W Average Tensile Strength Maximum Cable Bundle Diameter MLT8SS5/10 230 x 5/10 13.0/28.8 60 H10486 MLT12SS5/10 330 x 5/10 13.0/28.8 90 H10487 MLT16SS5/10 430 x 5/10 13.0/28.8 120 H10488 MLT24SS5/10 630 x 5/10 13.0/28.8 180 H10489 MAT8SS7/12 230 x 7/12 8.2/12.8 60 H10490 MAT12SS7/12 330 x 7/12 8.2/12.8 90 H10491 MAT16SS7/12 430 x 7/12 8.2/12.8 120 H10492 MAT24SS7/12 630 x 7/12 8.2/12.8 180 H10493 product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 129 3

CABLE TIES AND STRAPPING ME.T Nylon Cable Ties with Stainless Steel Tooth The special design of the ME.T cable tie guarantees maximum resistance and safety even in the most extreme applications. Size Items per Bag 100 x 2,5 100 200 x 2,5 100 140 x 3,5 100 200 x 3,5 100 280 x 3,5 100 186 x 4,5 100 290 x 4,5 100 360 x 4,5 100 360 x 7,5 50 Colour Maximum Diameter Opening load / Extraction Article (kg/dan) White 24 18 MET.2.2102R H10086 Black 24 18 MET.3.2102R H10087 White 55 18 MET.2.2105R H10176 Black 55 18 MET.3.2105R H10088 White 36 28 MET.2.2110R H10177 Black 36 28 MET.3.2110R H10089 White 55 28 MET.2.2111R H10178 Black 55 28 MET.3.2111R H10090 White 80 28 MET.2.2112R H10179 Black 80 28 MET.3.2112R H10091 White 51 40 MET.2.2123R H10180 Black 51 40 MET.3.2123R H10092 White 76 40 MET.2.2140R H10181 Black 76 40 MET.3.2140R H10094 White 101 40 MET.2.2126R H10182 Black 101 40 MET.3.2126R H10093 White 101 80 MET.2.2534R H10183 Black 101 80 MET.3.2534R H10095 Note: We can supply heat resistant, UV-stabilised, VO self-extinguishing and coloured cable ties to order. Comparative Cold-resistance Test Comparative Tie Opening Tests ME.T ME.T -40 C 80 dan -30 C 60 dan -20 C SEL 40 dan SEL -10 C 20 dan 0 C -40-25 -40-25 -25-15 -25-15 2,5 3,5 4,5 7,5 0 dan 18 11 28 20 40 28 80 65 2,5 3,5 4,5 7,5 130 2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.

CABLE AND WIRE MARKERS Ovalgrip Cable Markers Features and Benefits Ovalgrip markers have been specifically designed to mark cable and wire both before and after termination. Their oval shape means that these markers are easy to fit by hand directly onto the cable pre-termination or they can be attached as an identification flag post-termination using special marker Arrowtags. Arrowtags fitted with Ovalgrip are fastened using cable ties and can very easily be modified or removed without the need to uninstall the cable. Sizes 50 and 85 can be used with Arrowtags for identifying larger cable bundles. Application Ideally suited to panel building, mass transit, utilities, telecommunications and electrical contracting. Flexible PVC (High temperature 85 C). Coding A-Z and 0-9. Custom marking on request. HO markers available, black on yellow or white. International colour coding. Standard packets of: H085 = 100, HO50 = 500 May be filed directly on the cable or alternatively onto Arrow Tags. Material Data Materials Flexible Polyvinyl Chloride, cadmium free (PVC) Colour White, yellow, international resistor colour code Operating Temperature 65 C to +85 C, Intermittent +135 C Flammability Self extinguishing 0 1 2 3 4 5 6 7 8 9 0 9 A Z + - / Specification BS 2782-540B, BS 6746C, UL224, IEC 304, IEC 757 Cable Dimensions Arrowtag OD Packaging Lenght (mm2) Tag Characters 0-9 A - Z 1,5 3,6 500 AT1 62,5 9 H1486 H1487 2,5 5,9 100 AT2 63 11 H1489 H1490 AT3 100 19 - - Items above with (-) in the codes column are available on special request. Note: Arrowtags will accept Hellerman Tyton Insulok Cable Ties from 2.5-5mm (T18 - T50 Series). product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 1313

CABLE AND WIRE MARKERS Helagrip Cable Markers Features and Benefits Helagrip is a versatile and cost effective cable identification system. The specially designed internal profile allows one size of marker to be fitted onto a wide range of cable diameters. Helagrip s chevron cut ensures that the markers lock together, enabling the text legend to stay in place where cable movement or vibration is likely. The flexible material ensure that Helagrip cable markers always fit securely onto the wire. Application Ideally suited to panel building, mass transit, utilities, telcommunications and electrical contracting. Helagrip is supplied on a reel for ease of use. Markers are available as standard in international resistor colour code and yellow material marked in black. White material marked in black is available on special order. Characters are 0-9, A - Z and standard electrical symbols. For smaller cables and wire it is recommended that you use the AD applicator or the TJC installation tool. Flexible PVC (High temperature 85 C). Coding A-Z and 0-9. Custom marking on request. HO markers available, black on yellow or white. International colour coding. Standard packets of: H085 = 100, HO50 = 500 May be filed directly on the cable or alternatively onto Arrow Tags. Note Helagrip Markers - Chevron cut available colour coded, black on yellow or black on white. Material Data Materials Flexible Polyvinyl Chloride, cadmium free (PVC) Colour White, yellow, international resistor colour code Operating Temperature -65 C to +105 C. Intermittent +135 C Flammability Self extinguishing 0 1 2 3 4 5 6 7 8 9 0 9 A Z + - / Specification BS 2782-540B, BS 6746C, UL224, IEC 684-3 - 113 Cable Dimensions Quantity Per Applicator OD Tools Packet Reel 0-9 A - Z 1,0-3,0 500 1000 TJC13 H1465 H1466 2,0-5,0 500 1000 TJC25 H1468 H1469 3,0-6,0 500 250 TJC36 H1471 H1472 TJC applicator tools. 4,0-9,0 250 - TJC49 H1474 H1475 132 2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.

CONNECTORS Porcelain Scruits Description and Size Scruit Porcelain Midget Midget up to 4mm H97 Scruit Porcelain Normal Normal up to 10mm H99 Porcelain Connectors Description and Size Porcelain in 6A 2-Way CFH C402 Porcelain in 15A 2-Way CFH C404 Porcelain in 30A 2-Way CFH C406 Porcelain in 6A 3-Way CFH C403 Porcelain in 15A 3-Way CFH C405 Porcelain in 30A 3-Way CFH H79 H81 H82 H84 H86 H87 Electro Terminal Hi-Heat Strip Connectors Description and Size CONN HIHT 05A/12W H2488 CONN HIHT 10A/12W + FT H2491 CONN HIHT 10A/12W + FT H2492 CONN HIHT 10A/12W + FT/WP H2493 CONN HIHT 10A/12W H2494 CONN HIHT 10A/12W + WP H2495 CONN HIHT 16A/12W+ FT H2498 CONN HIHT 16A/12W+ FT/WP H2499 CONN HIHT 16A/12W H2500 CONN HIHT 16A/12W+ WP H2501 CONN LOHT 16A/12W BLACK - CONN LOHT 16A/12W WHITE H3134 CONN HIHT 32A/12W H2504 PVC Strip Connectors Description and Size 12W BLACK 12W TRANS 12W TRANS 12W BLACK 12W BLACK 12W TRANS 12W BLACK 12W TRANS 12W BLACK H88 H2490 H2497 H90 H92 H93 H94 H2506 H96 Items above with (-) in the codes column are available on special request. product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 1333

HEAT SHRINK Commericial Grade Polyolefin Is ideal for providing insulation of electrical connections, terminals, components and wiring systems. It requires a minimum shrink temperature of 120 C and is well suited to manual as well as automatic methods of application. Is very suitable for use as a continuous insulation sleeve in a variety of industrial applications. Mini Reels Supplied Recov. Wall (WT) Colour Ø D Ø D nom. Black CP24R 2.4 1.2 0.5 H683 CP32R 3.2 1.6 0.5 H685 CP48R 4.8 2.4 0.5 H687 CP64R 6.4 3.2 0.6 H689 CP95R 9.5 4.8 0.6 H691 CP127R 12.7 6.4 0.6 H693 CP190R 19.0 9.5 0.8 H695 CP254R 25.4 12.7 0.9 H697 Pre - Packs Supplied Recov. Wall (WT) Colours Ø D Ø D nom. Red Green Blue Yellow Black White Yellow CP24P 2.4 1.2 0.5 H643 - H642 H6314 H641 H644 CP32P 3.2 1.6 0.5 H647 - H646 H6157 H645 H648 CP48P 4.8 2.4 0.5 H651 - H650 - H649 H652 CP64P 6.4 3.2 0.6 H655 - H654 H7429 H653 H656 CP95P 9.5 4.8 0.6 H659 - H658 - H657 H660 CP127P 12.7 6.4 0.6 H663 - H662 - H692 H664 CP190P 19.0 9.5 0.8 H667 - H666 H6930 H694 H668 CP254P 25.4 12.7 0.9 H671 - H670 - H696 H672 CPPKITBK 2.4-4.8 x 10 each / 6.4-25.4 x 5 each - (Black) - - - - H10416 - CPPKITCOL 2.4-12.7 x 5 each / 19.0-25.4 x 2 each - (Std Colours) H10417 Material Data Commercial Grade Polyolefin Shrink Ratio 2:1 Longitudinal Change after Shrinkage.max %-5 )Minimum Shrink Temperature (Metric Operating Temperature )Dielectric Strength (metric Flammability +120 C -55 C to +135 C 25kV/mm Flame retardant except for clear Items above with (-) in the codes column are available on special request. Note: All dimensions in mm except for quantity in metre (m). Subject to technical changes. Colours available: Black, Red, Blue, White, Yellow, Green/Yellow, Clear (Clear is not Self Extinguishing) 134 2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.

PUTTY Cable Compound Putty Technical Data Description B.I.C.C 500g Pack H68 CABLE CLIPS Description and Size Flat White 5.0 K804 8.5 K805 10.5 K806 12.5 K807 14.5 K808 Round White 03 K809 04 K810 05 K811 06 K812 07 K813 08 K815 09 K817 10 K819 11 K821 12 K823 14 K824 20 K25 22 K825 Black 08 K814 09 K816 10 K818 11 K820 12 K822 product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 1353

GROMMETS, PLUGS AND STRIPS PVC Beading Edge Protection Strip Features and Benefits Manufactured from a flexible PVC compound which ensures ease of use. Can be used to protect cables from chafing on bulkheads. Application PVC Beading strip is used to protect cables routed through sharp-edged cutout sections. It can also be used to provide an attractive finish to panel edges. Technical Data Width Width Width Width Width Height (W) (W2) (W3) (W4) (H) (H2) SM1 5.0 1.0 1.8 4.2 6.3 4.9 H10462 RA1 6.4 2.4 - - 7.1 5.6 H10463 PS1 1.2 0.6 - - 5.0 3.15 H10464 Material Data Material Colour Operating Temperature Flammability )Flexible Polyvinyl Chloride, cadmium free (PVC )Black (BK -65 C to +105 C Self extinguishing WE ALSO STOCK A WIDE RANGE OF EDGE PROTECTION GROMMETS. Features and Benefits HellermannTyton edge protection grommets, made of cadmium-free, flexible PVC or Polyethylene, come in a wide range of shapes and sizes. They are resistant to various minerals and environmental effects. Application Edge protection grommets are used wherever cable and wires are routed through outlets and apertures. Grommets offer excellent mechanical protection. Note: For full range of grommets, plugs and strips enquire at your nearest branch. 136 2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.