or
The Horizon Fully Automated, -Clamp Perfect Binder features an interchangeable glue tank for both and adhesives. Features Fully automated set-up through the intuitive icon based LCD touchscreen. Customer replaceable glue tank unit for both hotmelt and hotmelt adhesives to meet varying customer requirements. Simplified and accurate changeover to produce professionally finished books. Equipped with two large application rollers for strong, high-quality binds and a separate side glue tank for added flexibility. Space-saving design with front operation and front maintenance. Book-binding up to 5 mm (.55 ) thickness. Easily operated by anyone in the bindery. Maximum cycle speed is,50 books per hour ( hotmelt glue). Ergonomic sliding windows provide easy, safe access and a clear view of operations.
Key Features Color Touchscreen Milling Lever Nipping Height Adjustment The 0. inch large color touchscreen maximizes ease of operation. Trouble-shooting screen helps operator maintain smooth production. Three different milling styles can be selected: Milling Off, Milling for or Milling for. Suction Cover Feed A strong, rigid nipping mechanism ensures high quality binding. The nipping height is simple and easy to adjust. Supersonic Double Feed Detect Sensor The advanced rotary suction feed system insures faster production. A wide range of cover sheets can be handled without any marking. The supersonic double feed detect sensor comes standard. Advanced detection with supersonic sensor ensures accurate double detection even with a solid black printed sheet. Delivery Conveyor Smoke Extractor The automated elevation conveyor can stack books up to 00 mm (. ) high. The jogging table is attached to the conveyor for efficient operation. Extracts fumes of hotmelt glue for comfortable working conditions.
Perfect Binder Tank and Tank Automated set-ups ensure user-friendly operation and professional binding. ii System The incorporates the remarkable binding mechanism and features an interchangeable glue tank, for both and adhesives. Book Feeding Section 5 The Horizon ii system can be integrated with pre-press and printing workflow to create a comprehensive automated CIP bindery with the prospect of jobs passing from the eye of the creator to the eye of the beholder in a single ii Net>Work>Flow for ultimate flexibility and efficiency in the on-demand era. MU-0 Polyurethane reactive adhesive suitable for coated stock. Lay-flat binding can be performed. End-to-end Automated Set-up Carriage Clamp Width at book feeding section at milling section Side Gluing Roller Width at glue tank unit Glue Length (Top-Bottom) at glue tank unit Wiper Opening for Glue Amount (First Application Roller/ Second Application Roller) at glue tank unit Spine Glue Thickness (Second Application Roller Height) at glue tank unit Nipping Width at nipping section (Fore-edge) at cover registration section 5 Cover Tail Edge Positioner at cover registration section 5 Scoring Position ( lines) at scoring section at cover feeding section at book delivery section Option MU-0 Commonly used for all kinds of binding. The melted glue can be used repeatedly so there's no need to clean up the tank after operation. Cleaning and Replacement of MU-0 Milling Section The application drums and back spinner lift and latch to provide easy access for cleaning of the tank. Install the special drain for glue run-off. The tank and drums are Teflon coated so that the remaining glue can be easily peeled off after cooling. Horizon s ii system can extract finishing data from written upstream at pre-press or, where these are not available, data can be input at the ii Control PC, to setup networked finishing equipment automatically. ii offers ultimate efficiency of production and total bindery management by minimising downtime at makeready, reducing waste, increasing staff flexibility and allowing constant job information management. Sliding glue tank for easy replacement. Pull out the tank and remove it with the optional special lifter. M Carriage Clamp Width A rigid clamping system holds the book block firmly in position during the milling and nipping process to produce a quality finished book. The safety beam ensures risk-free operation. Glue Tank Unit Dual application rollers and side gluing rollers ensure superior glue application to the spine for quality binding. Nipping Width A strong rigid nipping mechanism guarantees precise alignment of the cover to the book block. The nipping operating time and nipping delay time can be set up through the LCD touchscreen. Horizon ii System. Scan the Job Ticket with barcode reader on Satellite PC Polyurethane Reactive, also called, is a polyurethane adhesive attracting attention in both binding strength and ecology. Powerful servo motor driven milling and notching mechanism mills the spine of a book block or signature for optimum glue penetration and adherence. Milling depth can be adjusted from 0 to mm (0 to 0.5 ). Cover Registration Section 5 Scoring Section Cover Feeding Section Book Delivery Section Strong and Lay-Flat Binding Durable against Temperature As the printing industry becomes more diverse, demands for binding with color prints are growing. hotmelt glue has difficulty binding coated stock firmly and does not currently meet the requirements of Lay-Flat binding. However, the hotmelt glue can provide adequate binding strength on both offset and digital prints for quality Lay-Flat spread binding. The hotmelt glue is durable against high and low temperatures. The temperature resistance for hotmelt glue ranges from 0 to 0 degrees Celsius versus 0 to 0 degrees Celsius for hotmelt glue. This allows the bound book to be handled in almost any climate or location. The hotmelt glue provides the best page spread compared to the traditional hotmelt glue. High binding strength allows for the application of a small amount of glue so that well-spread books can be produced. Spine Glue: Glue Length (Top-Bottom), Wiper Opening for Glue Amount (First Application Roller/Second Application Roller), Spine Glue Thickness (Second Application Roller Height), Side Glue: Side Gluing Roller Width Nipping Section S Satellite PC Strong, Environmentally Friendly Solution I (Fore-edge), Cover Tail Edge Positioner Scoring Position ( lines) After transport to the nipping section, the cover is registered precisely with the fore-edge guide and tail edge positioner. The scoring width and position are automatically set up through the LCD touchscreen. Scoring is performed on thick covers for professional binding with sharp, square spine corners. The high capacity cover feed station has a maximum pile height of 50 mm (5.9 ) for continuous binding operation. The cover feeder can handle a wide range of cover stocks form. to 0. gsm of normal paper or 0. to.9 gsm of coated paper. The delivery section employs an elevation conveyor so that the bound books are gently received and transported to the stacker without damage to the book spine.. Transfer the setting parameter. Receive job status and fine-tune profile Hydraulic Cutter APC-II SB Three-side Trimmer HT-0 Computerized Cross Folder Prepress (Based on CIP) AFC-AKTSC AFC-AKTSC AFC-5FKT AFC-5AKTSC AFC-5AKTSC AFC-5AKTSC AFC-5AKTSC Postpress 5. Transfer the Job data Control PC. Load and arrange Job. Receive job status of each machine Perfect Binder BQ-0 Ecology Saddle-stitching System is an environmentally friendly adhesive and the bound book can be recycled. At 0 degrees Celsius, the glue temperature for is lower than that of hotmelt glue during application and saves energy. StitchLiner5500 Bookletmaker CTP Thermal Plate. out the Job Ticket. Put the Job Ticket on the stack of printed sheets SPF-00A/FC-00A High Performance Binding System CABS5000 CABS000 -Clamp Perfect Binder SB-0
Perfect Binder Tank and Tank Automated set-ups ensure user-friendly operation and professional binding. ii System The incorporates the remarkable binding mechanism and features an interchangeable glue tank, for both and adhesives. Book Feeding Section 5 The Horizon ii system can be integrated with pre-press and printing workflow to create a comprehensive automated CIP bindery with the prospect of jobs passing from the eye of the creator to the eye of the beholder in a single ii Net>Work>Flow for ultimate flexibility and efficiency in the on-demand era. MU-0 Polyurethane reactive adhesive suitable for coated stock. Lay-flat binding can be performed. End-to-end Automated Set-up Carriage Clamp Width at book feeding section at milling section Side Gluing Roller Width at glue tank unit Glue Length (Top-Bottom) at glue tank unit Wiper Opening for Glue Amount (First Application Roller/ Second Application Roller) at glue tank unit Spine Glue Thickness (Second Application Roller Height) at glue tank unit Nipping Width at nipping section (Fore-edge) at cover registration section 5 Cover Tail Edge Positioner at cover registration section 5 Scoring Position ( lines) at scoring section at cover feeding section at book delivery section Option MU-0 Commonly used for all kinds of binding. The melted glue can be used repeatedly so there's no need to clean up the tank after operation. Cleaning and Replacement of MU-0 Milling Section The application drums and back spinner lift and latch to provide easy access for cleaning of the tank. Install the special drain for glue run-off. The tank and drums are Teflon coated so that the remaining glue can be easily peeled off after cooling. Horizon s ii system can extract finishing data from written upstream at pre-press or, where these are not available, data can be input at the ii Control PC, to setup networked finishing equipment automatically. ii offers ultimate efficiency of production and total bindery management by minimising downtime at makeready, reducing waste, increasing staff flexibility and allowing constant job information management. Sliding glue tank for easy replacement. Pull out the tank and remove it with the optional special lifter. M Carriage Clamp Width A rigid clamping system holds the book block firmly in position during the milling and nipping process to produce a quality finished book. The safety beam ensures risk-free operation. Glue Tank Unit Dual application rollers and side gluing rollers ensure superior glue application to the spine for quality binding. Nipping Width A strong rigid nipping mechanism guarantees precise alignment of the cover to the book block. The nipping operating time and nipping delay time can be set up through the LCD touchscreen. Horizon ii System. Scan the Job Ticket with barcode reader on Satellite PC Polyurethane Reactive, also called, is a polyurethane adhesive attracting attention in both binding strength and ecology. Powerful servo motor driven milling and notching mechanism mills the spine of a book block or signature for optimum glue penetration and adherence. Milling depth can be adjusted from 0 to mm (0 to 0.5 ). Cover Registration Section 5 Scoring Section Cover Feeding Section Book Delivery Section Strong and Lay-Flat Binding Durable against Temperature As the printing industry becomes more diverse, demands for binding with color prints are growing. hotmelt glue has difficulty binding coated stock firmly and does not currently meet the requirements of Lay-Flat binding. However, the hotmelt glue can provide adequate binding strength on both offset and digital prints for quality Lay-Flat spread binding. The hotmelt glue is durable against high and low temperatures. The temperature resistance for hotmelt glue ranges from 0 to 0 degrees Celsius versus 0 to 0 degrees Celsius for hotmelt glue. This allows the bound book to be handled in almost any climate or location. The hotmelt glue provides the best page spread compared to the traditional hotmelt glue. High binding strength allows for the application of a small amount of glue so that well-spread books can be produced. Spine Glue: Glue Length (Top-Bottom), Wiper Opening for Glue Amount (First Application Roller/Second Application Roller), Spine Glue Thickness (Second Application Roller Height), Side Glue: Side Gluing Roller Width Nipping Section S Satellite PC Strong, Environmentally Friendly Solution I (Fore-edge), Cover Tail Edge Positioner Scoring Position ( lines) After transport to the nipping section, the cover is registered precisely with the fore-edge guide and tail edge positioner. The scoring width and position are automatically set up through the LCD touchscreen. Scoring is performed on thick covers for professional binding with sharp, square spine corners. The high capacity cover feed station has a maximum pile height of 50 mm (5.9 ) for continuous binding operation. The cover feeder can handle a wide range of cover stocks form. to 0. gsm of normal paper or 0. to.9 gsm of coated paper. The delivery section employs an elevation conveyor so that the bound books are gently received and transported to the stacker without damage to the book spine.. Transfer the setting parameter. Receive job status and fine-tune profile Hydraulic Cutter APC-II SB Three-side Trimmer HT-0 Computerized Cross Folder Prepress (Based on CIP) AFC-AKTSC AFC-AKTSC AFC-5FKT AFC-5AKTSC AFC-5AKTSC AFC-5AKTSC AFC-5AKTSC Postpress 5. Transfer the Job data Control PC. Load and arrange Job. Receive job status of each machine Perfect Binder BQ-0 Ecology Saddle-stitching System is an environmentally friendly adhesive and the bound book can be recycled. At 0 degrees Celsius, the glue temperature for is lower than that of hotmelt glue during application and saves energy. StitchLiner5500 Bookletmaker CTP Thermal Plate. out the Job Ticket. Put the Job Ticket on the stack of printed sheets SPF-00A/FC-00A High Performance Binding System CABS5000 CABS000 -Clamp Perfect Binder SB-0
Perfect Binder Tank and Tank Automated set-ups ensure user-friendly operation and professional binding. ii System The incorporates the remarkable binding mechanism and features an interchangeable glue tank, for both and adhesives. Book Feeding Section 5 The Horizon ii system can be integrated with pre-press and printing workflow to create a comprehensive automated CIP bindery with the prospect of jobs passing from the eye of the creator to the eye of the beholder in a single ii Net>Work>Flow for ultimate flexibility and efficiency in the on-demand era. MU-0 Polyurethane reactive adhesive suitable for coated stock. Lay-flat binding can be performed. End-to-end Automated Set-up Carriage Clamp Width at book feeding section at milling section Side Gluing Roller Width at glue tank unit Glue Length (Top-Bottom) at glue tank unit Wiper Opening for Glue Amount (First Application Roller/ Second Application Roller) at glue tank unit Spine Glue Thickness (Second Application Roller Height) at glue tank unit Nipping Width at nipping section (Fore-edge) at cover registration section 5 Cover Tail Edge Positioner at cover registration section 5 Scoring Position ( lines) at scoring section at cover feeding section at book delivery section Option MU-0 Commonly used for all kinds of binding. The melted glue can be used repeatedly so there's no need to clean up the tank after operation. Cleaning and Replacement of MU-0 Milling Section The application drums and back spinner lift and latch to provide easy access for cleaning of the tank. Install the special drain for glue run-off. The tank and drums are Teflon coated so that the remaining glue can be easily peeled off after cooling. Horizon s ii system can extract finishing data from written upstream at pre-press or, where these are not available, data can be input at the ii Control PC, to setup networked finishing equipment automatically. ii offers ultimate efficiency of production and total bindery management by minimising downtime at makeready, reducing waste, increasing staff flexibility and allowing constant job information management. Sliding glue tank for easy replacement. Pull out the tank and remove it with the optional special lifter. M Carriage Clamp Width A rigid clamping system holds the book block firmly in position during the milling and nipping process to produce a quality finished book. The safety beam ensures risk-free operation. Glue Tank Unit Dual application rollers and side gluing rollers ensure superior glue application to the spine for quality binding. Nipping Width A strong rigid nipping mechanism guarantees precise alignment of the cover to the book block. The nipping operating time and nipping delay time can be set up through the LCD touchscreen. Horizon ii System. Scan the Job Ticket with barcode reader on Satellite PC Polyurethane Reactive, also called, is a polyurethane adhesive attracting attention in both binding strength and ecology. Powerful servo motor driven milling and notching mechanism mills the spine of a book block or signature for optimum glue penetration and adherence. Milling depth can be adjusted from 0 to mm (0 to 0.5 ). Cover Registration Section 5 Scoring Section Cover Feeding Section Book Delivery Section Strong and Lay-Flat Binding Durable against Temperature As the printing industry becomes more diverse, demands for binding with color prints are growing. hotmelt glue has difficulty binding coated stock firmly and does not currently meet the requirements of Lay-Flat binding. However, the hotmelt glue can provide adequate binding strength on both offset and digital prints for quality Lay-Flat spread binding. The hotmelt glue is durable against high and low temperatures. The temperature resistance for hotmelt glue ranges from 0 to 0 degrees Celsius versus 0 to 0 degrees Celsius for hotmelt glue. This allows the bound book to be handled in almost any climate or location. The hotmelt glue provides the best page spread compared to the traditional hotmelt glue. High binding strength allows for the application of a small amount of glue so that well-spread books can be produced. Spine Glue: Glue Length (Top-Bottom), Wiper Opening for Glue Amount (First Application Roller/Second Application Roller), Spine Glue Thickness (Second Application Roller Height), Side Glue: Side Gluing Roller Width Nipping Section S Satellite PC Strong, Environmentally Friendly Solution I (Fore-edge), Cover Tail Edge Positioner Scoring Position ( lines) After transport to the nipping section, the cover is registered precisely with the fore-edge guide and tail edge positioner. The scoring width and position are automatically set up through the LCD touchscreen. Scoring is performed on thick covers for professional binding with sharp, square spine corners. The high capacity cover feed station has a maximum pile height of 50 mm (5.9 ) for continuous binding operation. The cover feeder can handle a wide range of cover stocks form. to 0. gsm of normal paper or 0. to.9 gsm of coated paper. The delivery section employs an elevation conveyor so that the bound books are gently received and transported to the stacker without damage to the book spine.. Transfer the setting parameter. Receive job status and fine-tune profile Hydraulic Cutter APC-II SB Three-side Trimmer HT-0 Computerized Cross Folder Prepress (Based on CIP) AFC-AKTSC AFC-AKTSC AFC-5FKT AFC-5AKTSC AFC-5AKTSC AFC-5AKTSC AFC-5AKTSC Postpress 5. Transfer the Job data Control PC. Load and arrange Job. Receive job status of each machine Perfect Binder BQ-0 Ecology Saddle-stitching System is an environmentally friendly adhesive and the bound book can be recycled. At 0 degrees Celsius, the glue temperature for is lower than that of hotmelt glue during application and saves energy. StitchLiner5500 Bookletmaker CTP Thermal Plate. out the Job Ticket. Put the Job Ticket on the stack of printed sheets SPF-00A/FC-00A High Performance Binding System CABS5000 CABS000 -Clamp Perfect Binder SB-0
Perfect Binder Tank and Tank Automated set-ups ensure user-friendly operation and professional binding. ii System The incorporates the remarkable binding mechanism and features an interchangeable glue tank, for both and adhesives. Book Feeding Section 5 The Horizon ii system can be integrated with pre-press and printing workflow to create a comprehensive automated CIP bindery with the prospect of jobs passing from the eye of the creator to the eye of the beholder in a single ii Net>Work>Flow for ultimate flexibility and efficiency in the on-demand era. MU-0 Polyurethane reactive adhesive suitable for coated stock. Lay-flat binding can be performed. End-to-end Automated Set-up Carriage Clamp Width at book feeding section at milling section Side Gluing Roller Width at glue tank unit Glue Length (Top-Bottom) at glue tank unit Wiper Opening for Glue Amount (First Application Roller/ Second Application Roller) at glue tank unit Spine Glue Thickness (Second Application Roller Height) at glue tank unit Nipping Width at nipping section (Fore-edge) at cover registration section 5 Cover Tail Edge Positioner at cover registration section 5 Scoring Position ( lines) at scoring section at cover feeding section at book delivery section Option MU-0 Commonly used for all kinds of binding. The melted glue can be used repeatedly so there's no need to clean up the tank after operation. Cleaning and Replacement of MU-0 Milling Section The application drums and back spinner lift and latch to provide easy access for cleaning of the tank. Install the special drain for glue run-off. The tank and drums are Teflon coated so that the remaining glue can be easily peeled off after cooling. Horizon s ii system can extract finishing data from written upstream at pre-press or, where these are not available, data can be input at the ii Control PC, to setup networked finishing equipment automatically. ii offers ultimate efficiency of production and total bindery management by minimising downtime at makeready, reducing waste, increasing staff flexibility and allowing constant job information management. Sliding glue tank for easy replacement. Pull out the tank and remove it with the optional special lifter. M Carriage Clamp Width A rigid clamping system holds the book block firmly in position during the milling and nipping process to produce a quality finished book. The safety beam ensures risk-free operation. Glue Tank Unit Dual application rollers and side gluing rollers ensure superior glue application to the spine for quality binding. Hydraulic Cutter APC-II SB Three-side Trimmer. Receive job status and fine-tune profile HT-0 Polyurethane Reactive, also called, is a polyurethane adhesive attracting attention in both binding strength and ecology. Powerful servo motor driven milling and notching mechanism mills the spine of a book block or signature for optimum glue penetration and adherence. Milling depth can be adjusted from 0 to mm (0 to 0.5 ). Nipping Section ii System Computerized Cross Folder Cover Registration Section 5 Scoring Section Cover Feeding Section Book Delivery Section Strong and Lay-Flat Binding Durable against Temperature As the printing industry becomes more diverse, demands for binding with color prints are growing. hotmelt glue has difficulty binding coated stock firmly and does not currently meet the requirements of Lay-Flat binding. However, the hotmelt glue can provide adequate binding strength on both offset and digital prints for quality Lay-Flat spread binding. The hotmelt glue is durable against high and low temperatures. The temperature resistance for hotmelt glue ranges from 0 to 0 degrees Celsius versus 0 to 0 degrees Celsius for hotmelt glue. This allows the bound book to be handled in almost any climate or location. The hotmelt glue provides the best page spread compared to the traditional hotmelt glue. High binding strength allows for the application of a small amount of glue so that well-spread books can be produced. Spine Glue: Glue Length (Top-Bottom), Wiper Opening for Glue Amount (First Application Roller/Second Application Roller), Spine Glue Thickness (Second Application Roller Height), Side Glue: Side Gluing Roller Width S. Transfer the setting parameter Strong, Environmentally Friendly Solution I Nipping Width A strong rigid nipping mechanism guarantees precise alignment of the cover to the book block. The nipping operating time and nipping delay time can be set up through the LCD touchscreen. (Fore-edge), Cover Tail Edge Positioner Scoring Position ( lines) After transport to the nipping section, the cover is registered precisely with the fore-edge guide and tail edge positioner. The scoring width and position are automatically set up through the LCD touchscreen. Scoring is performed on thick covers for professional binding with sharp, square spine corners. The high capacity cover feed station has a maximum pile height of 50 mm (5.9 ) for continuous binding operation. The cover feeder can handle a wide range of cover stocks form. to 0. gsm of normal paper or 0. to.9 gsm of coated paper. The delivery section employs an elevation conveyor so that the bound books are gently received and transported to the stacker without damage to the book spine. Prepress Digital Control PC. Load and arrange Job. Receive job status of each machine Perfect Binder BQ- 0C Cace Binder Satellite PC HCB- Saddle-stitching System Ecology is an environmentally friendly adhesive and the bound book can be recycled. At 0 degrees Celsius, the glue temperature for is lower than that of hotmelt glue during application and saves energy.. Scan the Job Ticket with barcode reader on Satellite PC Postpress 5. Transfer the job data StitchLiner000 StitchLiner5500 Bookletmaker SPF-00A/FC-00A Digital CTP. out the Job Ticket High Performance Binding System CABS5000 CABS000 -Clamp Perfect Binder Thermal Plate AFC-A /D AFC-A /D AFC-5F AFC-5A AFC-5A AFC-5A AFC-5A AF-5TF AF- 0TA SB-0. Put the Job Ticket on the stack of printed sheets
Binding Mode Number of Clamps Book Block Size (Top-Bottom x Fore-edge) Book Thickness Cover Size (Top-Bottom x Fore-edge) Cover Weight Range Cover Pile Height Warm up Time Glue Temperature Maximum Milling Depth Cycle Speed Voltage / Frequency Rated Current Power Consumption Heat Output Motors Heaters Machine Dimensions Machine Weight Major Specifications Binding with milling, Binding without milling and Padding Max. 0 x 0 mm (.59 x.59 ) Min. 5 x 05 mm (5. x. ) 0. to 5 mm (0.05 to.50 ) (The book thickness can be limited depending on the sheet weight, book size and milling depth.) Max. 0 x 0 mm (.59 x 5.9 ) (Up to 50 mm or. forwards from the clamp face.) (Up to 0 mm or.0 backwards from the clamp face.) Min. 5 x 5 mm (5. x. ) (Up to 5 mm or.5 forwards from the clamp face.) (Up to 0 mm or. backwards from the clamp face.) Normal Paper. to 0. gsm Coated Paper 0. to.9 gsm Max. 50 mm (5.9 ) 0 min. : 50 to 0 C (0 C for HM-0) Spine Glue Tank : 0 to 0 C Side Glue Tank : 50 to 0 C (0 C for HM-0) mm (0.5 ) Max.,50 cycles/hr. Max.,000 cycles/hr. -Phase 00 / 0 / 00 V, 50 / 0 Hz The external transformer is necessary for 0 V / 00 V. -Phase 00 V 50 / 0 Hz 0.5 /.0 A (Max..9 /. A) -Phase 0 V 50 / 0 Hz. /. A (Max..9 /.0 A) -Phase 00 V 50 / 0 Hz 5. /.5 A (Max.. /. A) -Phase 00 V 50 / 0 Hz. /.0 kw -Phase 0 V 50 / 0 Hz. /.0 kw -Phase 00 V 50 / 0 Hz. /. kw,00 kj (,0 kcal). kw x / 50 W x / 50 W x / 00 W x / 00 W x / 00 W x / 0 W x / 5 W x Delivery Conveyor : 0 W x / 0 W x 50 W x / :. kw x / : 900 W x / 0 W x With delivery conveyor and milling blower duct :,0(W) x,0(d) x,000(h) mm (. x. x. ) Without delivery conveyor and milling blower duct :,0(W) x,090(d) x,000(h) mm (. x.0 x. ) Main Body :,90 kg (, lbs.), Delivery Conveyor : 99 kg (9 lbs.), Transformer : 0 kg ( lbs.) Options SI-0 Book Thickness Measuring Device The SI-0 is a book thickness measuring and input device for further operation efficiency. T-0 Weekly Timer The T-0 weekly timer automatically switches power on at pre-set times for quick makeready. Time and day of the week can be set. PM-0 Premelt Tank ( litter) The PM-0 is the premelt tank for hotmelt glue. L-0 Manual Simple Lifter F-0 Fork for Lifter The L-0 is a hand lifter for easy and safe tank replacement. The F-0 fork is a custom-fit attachment to the lifter that holds the glue tank firmly in position for easy and safe tank replacement. S-0 Stand for Melt Tank Unit The S-0 stand is designed to receive and hold the glue tank unit after replacement. *The machine design and specifications are subject to change without any notice. Height =,000 (. ) Machine Dimensions Unit : mm (inch) 00 (5. ),0 (. ) M-0 Glue Melting Heater The M-0 is a laboratory oven used to premelt the hotmelt glue.,090 (.0 ) Transformer Height = 0 (.9 ) 0 (. ) (.5 ),50 (5. ) 50 (0. ),0 (. ) B-0 Teflon Coated Beaker The B-0 Teflon coated beaker can be used to premelt the hotmelt glue to refill the glue tank. Distributed by 50 Kuze Ooyabu-cho, Minami-ku, Kyoto, 0-0, Japan Phone : +-(0)5-9-00, Fax : +-(0)5-9-0, www.horizon.co.jp 000/SO/BQ0/0E/SV