Accessories FOR HELIAX PRODUCTS P r o d u c t S E L E C T I O N G U I D E 2 0 0 7
Table of Cotets Itroductio Cable Istallatio Accessories Cable Hoistig ad Attachmets... 8 Weatherproofig... 19 Cable Etry... 22 Istallatio Aids... 24 Lightig Protectio Groudig Kits... 30 Groudig Bars... 34 Surge Arrestors... 37 Appedixes Appedix 1: Quarterwave Stub Surge Arrestors... 40 Appedix 2: Gas Tube Surge Arrestors... 43 Appedix 3: dc Passig T-Series Surge Arrestors... 46 Appedix 4: Lightig Strike Probability... 47 Appedix 5: Additioal Documets... 48 Appedix 6: Hager Spacig Guidelies... 49 Idex... 58 B D A A D E C F A B C D E F Cable Hoistig ad Attachmet Weatherproofig Cable Etry Groudig Kits Groudig Bars Arrestor Plus Surge Arrestors
Adrew s Clear Advatage Aroud the globe, i a world beig trasformed by commuicatios, people aticipate more tha ever that wireless services will ehace their lives, workplaces, ad commuities. With the covergece of voice, data, ad video, we experiece the promise of mobility ad we experiece Adrew. Adrew supports the emergig mobile society, ad the compaies that make this today s reality, with complete wireless solutios. Our customers represet the leadig wireless, broadbad, ad satellite commuicatio providers of the world. We support all major operators ad OEMs i every regio ad are extremely proud of these relatioships, may of which we have served for decades. Adrew solutios are techology agostic ad ubiased regardig platform, frequecy ad techology evolutio, eve withi our ow product portfolio. With our broad base of products, we support more global markets ad offer more kowledge ad experiece i licesig, spectrum aalysis ad utilizatio, asset optimizatio, ad customized, multi-prog problem-solvig for buildig, optimizig, ad ehacig etworks for growth ad success. Simply, we uderstad your challeges ad are uiquely prepared to help as a umatched oe-stop resource for maagig the etire life cycle of wireless etworks. Adrew provides products ad solutios for the etire RF footprit with our Atea ad Cable passive products ad our Wireless Network Solutios active products. Our substatial ivestmet i global research ad developmet esures a pipelie of ew products ad solutios that address our customers evolvig etwork requiremets. The Adrew flash represets a eviable 70-year legacy of customer service that brigs us to today, with over 11,000 employees i 35 coutries, ad a umatched global distributio etwork that esures that our customers receive essetial support wherever ad wheever they eed it. Our talets, expertise, ad commitmet are always earby, ad our local presece i every regio of the world esures cost-effective products ad o-time delivery ad services. Everywhere you look, the promise of mobility is here ad we at Adrew promise to liste, aticipate, ad iovate, ad to cotiue to ear the trust ad respect of our customers.
Atea ad Cable Products Segmet Wireless Network Solutios Segmet ANTENNA AND CABLE PRODUCTS SATELLITE COMMUNICATIONS BASE STATION SUBSYSTEMS NETWORK SOLUTIONS WIRELESS INNOVATIONS Base Statio Atea ad Remote Electrical Dowtilt Systems Microwave Ateas Coaxial Foam, Air, ad Specialty Cable Coectors, Surge Arrestors, ad Assemblies Broadbad Cables Site Istallatio Products ad Services Bias Tees Direct-to-Home Outdoor Uits Very Small Aperture Termial Outdoor Uits Earth Statio Ateas Gateway Systems MilSatCom Atea Systems Govermet/Radar Ateas RF Electroics Site Istallatio ad Services Sigle-Carrier Power Amplifiers Multicarrier Power Amplifiers Custom I-Cabiet Amplifiers Custom I-Cabiet Filters Tower Mouted Amplifiers Filters/Combiers Itegrated Products Micro/Pico Cells Remote Radio Heads After Market Services Geolocatio ad Locatio Based Services/ Geolocatio Mobile Locatio Solutios Spectrum Maagemet Network Optimizatio Network Ifrastructure ad Program Maagemet Advaced Data Collectio RF Repeaters RF Boosters Optical Distributio Networks Radiatig Cable Passive Splitters, Combiers, Duplexers, Termiators, ad Idoor Ateas Operatios ad Maiteace Ceter Turkey System Desig ad Project Maagemet
Services Plaig Software AASP the first ad oly PCS/Cellular Systems Desig Software Desig your PCS or cellular system i less time, with greater accuracy ad lower costs with advaced Adrew Atea Systems Plaer software (AASP). Powerful AASP software graphically guides you through the etire desig process, from the choice of frequecy to the available shippig optios. The program s dyamic, rule-based logic geerates custom solutios by usig stadard Adrew products while automatically checkig compoet compatibility. Upo completio, AASP provides you with a customized bill of materials of the Adrew parts ecessary for the system. AASP is available o the Adrew Powertools CD or as a dowload from www.adrew.com. Customer Support Ceter (CSC) Service Aroud the Clock, Aroud the World Cotact the Adrew Customer Support Ceter for: d Techical support d Order status d Coordiatig product service, repairs, or replacemet d Product iformatio d Replacemet materials OePack SM Site Kits The Aswer for More Efficiet System Build-outs Today s global build-out demads ew solutios that speed system deploymet ad simplify supply chai maagemet. To help system maagers better achieve these goals, Adrew offers kits for wireless RF commuicatios systems sites. OePack Site Kits provide the critical compoets i easy to order, easy to maage packages. System desigers ad maagers ca be cofidet of shorteed project plaig ad executio cycles, improved efficiecy, ad depedable system performace. Call toll free from: North America 1-800-255-1479 Fax 1-800-349-5444 Iteratioal: Uited Kigdom 0800-250055 Australia 1800-803 219 New Zealad 0800-441-747 Call from other areas: +1 708-873-2307
Istallatio Techiques to Esure Quality! Adrew products ad people are at the forefrot of coectig the wireless world. As the idustry evolves, the Adrew Istitute is committed to providig you with quality, effective traiig. Our traiers deliver kowledge that ca develop your skills ad self-assurace, as well as beefit your system performace ad reliability. Dedicated Adrew Istitute traiers will share their prove istallatio techiques ad expertise with you i oe- or two-day sessios. Adrew Istitute Techical Traiig You will lear: d How to obtai the highest possible performace with every Adrew product istalled d System fudametals ad how compoets work together d Proper istallatio of cable, coectors, ad accessories through hads-o practice d TMW systems fudametals ad essetial elemets of path aligmet d Pressurizatio systems theory of operatio ad istallatio techiques d Proper path aligmet d Fudametals of VSWR sweep testig, isertio loss, ad TDR/FDR plots The Adrew Istitute welcomes the opportuity to serve the idustry. We ca brig select courses to your facility, or you ca come to ay oe of our coveiet traiig locatios. Build a Ageda Customize Your Traiig: Coector Attachmet Fudametals of VSWR (1 hour per coector) (4 hours) d Cable cocepts d Typical site cofiguratio d Coector attachmet d Plot/sweep iterpretatio d Accessories d Troubleshootig RET Atea (2 hours) d Atea cocepts d Moutig techiques d Weatherproofig d Ispectio ad maiteace Terrestrial Microwave Systems (2 days) d RF theory/tmw fudametals d Atea istallatio d Path aligmet d Pressurizatio fudametals More customers are madatig that techicias istallig their systems are registered as havig completed Adrew Istitute traiig. For more iformatio visit our Web site at: www.adrew.com Registratio is available olie or call: +1-779-435-6231 Orlad Park, Illiois USA Lochgelly, Scotlad Sorocaba, Brazil Suzhou, Chia
Selectio Guide Elemets of a Cable Moutig ad Protectio System Oce you ve selected the cable ad coectors for your system, the cable moutig ad protectio system must be plaed. Adrew offers a comprehesive lie of istallatio accessories ad lightig protectio systems to help you realize your commuicatios system s full potetial. Hoistig Grips Select a hoistig grip to safely raise the cable ad hold it durig hager attachmet. I some cases, a hoistig grip must also be used with a calibrated clamp, available from Adrew, to provide permaet support for the cable. Cable Etry The fial step i a base statio istallatio is to brig the cable ito the buildig or radio cabiet. Two basic types of cable etry systems are available: a stadard buildig etry, ad a itegrated system that combies cable etry ad lightig surge suppressio ito oe efficiet system. Hagers The type or shape of the structure, the space available for cable attachmet, the type of eviromet the system will be exposed to, ad the ease of istallatio or maiteace are key cosideratios. May hager optios are available, ad may variables have tradeoffs that affect total hager system cost. The table o page 18 will help you select the best hagers for your system ad budget. Weatherproofig Weatherproofig keeps coector iterfaces tight ad adds a additioal layer of protectio agaist the eviromet. Adrew offers three types of weatherproofig. A stadard weatherproofig kit provides uiversal coverage ad uses butyl ad viyl tapes to wrap coector surfaces. Our 3M Cold Shrik weatherproofig kit uses a self-shrikig techology to reduce istallatio time. New WeatherShield eclosures seal ad protect coectors for the eviromet i secods. Groudig Kits A groudig kit diverts trasiet currets from lightig off the trasmissio lie to a earth groudig system to prevet damage to cable ad radio equipmet. A typical istallatio uses three groudig kits: ear the top of the mai feeder cable, at the bottom of the mai feeder prior to the horizotal ru, ad just prior to the cable eterig the buildig. Adrew offers three kit types to meet the requiremets of your system ad budget. Surge Arrestors Adrew Arrestor Plus surge arrestors provide the last stage of a effective lightig protectio system. Istall them to divert lightig trasiets off the ier coductor of your coaxial cable before they reach your radio equipmet. Select from a variety of surge arrestors to meet your exact requiremets.
CABLE INSTALLATION ACCESSORIES ( Cable Hoistig ad Attachmet ( Weatherproofig ( Cable Etry ( Istallatio Aids
Cable Istallatio Accessories Cable Hoistig ad Attachmet Support/Hoistig Grip Safer, Faster Cable Hoistig Lift ad support cable i your moopole or o your tower faster ad more safely ad without the threat of slippage. Our oe-piece grip ad lockig clamp speed ad simplify istallatio by elimiatig time cosumig lacig. Use at 200 ft (60 m) itervals to raise cable ad provide permaet cable support. Basic kit icludes oe grip ad oe support clamp. Support clamps are also available i kits of 10. Istallatio tool is required. Part Number Part Number Support Grip Support Clamp Cable Size Cable Type F1SGRIP F1SGRIP-1IK 1/4" FSJ1 L1SGRIP L1SGRIP-1IK 1/4" LDF1 E2SGRIP E2SGRIP-2IK 3/8" EFX2 L2SGRIP L2SGRIP-2IK 3/8" LDF2 F2SGRIP F2SGRIP-2IK 3/8" FSJ2 C2SGRIP C2SGRIP-2IK 3/8" CNT-400 L4SGRIP L4SGRIP-4IK 1/2" LDF4 F4SGRIP F4SGRIP-4IK 1/2" FSJ4 L45SGRIP L45SGRIP-45IK 5/8" LDF4.5 L5SGRIP L5SGRIP-5IK 7/8" LDF5, VXL5 L6SGRIP L6SGRIP-6IK 1-1/4" LDF6, VXL6 L7SGRIP L7SGRIP-7IK 1-5/8" LDF7, VXL7 L12SGRIP L12SGRIP-12IK 2-1/4" LDF12 3CCGRIP RET cable Part Number Descriptio SG-IT Support Clamp Istallatio Tool Stadard Hoistig Grip For Trasmissio Lie Istallatio Use at 200 ft (60 m) itervals to raise cable o tower. Use with additioal support clamp to achieve optimum cable grip. Part Number Part Number Hoistig Grip Support Clamp Cable Size 43094 L4SGRIP-4IK 1/2" 29958 L45SGRIP-45IK 5/8" 19256B L5SGRIP-5IK 7/8" 29961 L6SGRIP-6IK 1-1/4" 24312A L7SGRIP-7IK 1-5/8" 31535 L12SGRIP-12IK 2-1/4" 26985A 3" 34759 4" 31031-1 5" TIP! Use the support/hoistig grip wheever possible. Rely o the stadard, lace up hoistig grip oly whe coectors are pre-attached or you have to place a grip i the middle of a cable ru over 200 ft.
Cable Istallatio Accessories Cable Hoistig ad Attachmet SapStak Hagers No more worries about fumblig with hardware or losig small parts because there are t ay! New atea systems ca ow be added to crowded multiple-teat towers with miimal space! SapStak sap-i hagers ca be stacked up to three deep whe usig 1/2 i ad 7/8 i coaxial cable, or two deep whe usig 1-1/4 i ad 1-5/8 i coaxial cable. Each hager accommodates oe ru of HELIAX cable. The distictive, self-cotaied desig of the SapStak stackable sapi hager elimiates the eed for moutig hardware ad istallatio tools. This simplifies coaxial cable istallatios, lowerig both time ad cost. Retetio tabs o the sprig fork make SapStak hagers highly resistat to pop-out, so istallatios are robust ad secure. Yet, specially desiged to dampe vibratios, SapStak hagers do ot have a rigid hold o the tower, so motio caused by wid is simply absorbed. This reduces movemet dow the coaxial cable, greatly reducig stress o the coectios at the jumper cable, atea, or device. SapStak hagers ca be mouted directly to the tower support system, or used i cojuctio with a variety of moutig accessories for rooftops, buildigs, ad water towers. The SapStak hager istalls i 3/4 i holes i support structures 1/8 i (0.120 i to 0.150 i) thick. The stailess steel costructio of the SapStak sap-i hager provides exceptioal itegrity, eve i highly corrosive eviromets ad extreme weather coditios. Compact istallatios save tower space. Ad maiteace is easy, sice SapStak stackable sap-i hagers are self sufficiet o hardware required for istallatio! Mouts to pre-puched 3/4 i (19 mm) holes, kit of 10. Part Number Descriptio SSH-12 SapStak hager kit for 1/2" corrugated cable SSH-78 SapStak hager kit for 7/8" corrugated cable SSH-114 SapStak hager kit for 1-1/4" corrugated cable SSH-158 SapStak hager kit for 1-5/8" corrugated cable SSHAK-3812 SapStak hager kit for RET cable SSHA-38 Isert, adapts 1/2" sap i hager to RET cable Uited States Patets: 6,345,543, 6,899,305, ad 6,161,804. Other patets pedig. Sap-I Hagers Attachmet with No Hardware! Adrew Sap-I hagers provide quick ad easy attachmet i all types of weather. The hagers sap directly ito holes i the tower support members. Istallatio time ad costs are substatially reduced. These hagers feature cable grippig tabs to prevet cable slippage, ad are costructed of heavy gauge stailess steel for high stregth ad excellet corrosio resistace. Waveguide versios iclude a heavy UV resistat rubber isert to secure the elliptical waveguide. Part Number Descriptio 206706A-6 For 5/8" cable 206706A-5 For 2-1/4" cable EWSH-52 For EW52 waveguide EWSH-63 For EW63 waveguide EWSH-64 For EW64 waveguide EWSH-77 For EW77 waveguide EWSH-90 For EW90 waveguide EWSH-127A For EW127A waveguide EWSH-132 For EW132 waveguide EWSH-180 For EW180 waveguide EWSH-220 For EW220 waveguide EWSH-240 For EW249 waveguide
Cable Istallatio Accessories Cable Hoistig ad Attachmet Uiversal Sap-I Adapter The uiversal sap-i adapter is a versatile device for securig coaxial cable hagers to structures such as commuicatios towers, rooftops, buildigs ad water towers. The uiversal sap-i adapter secures coaxial cable to ay roud or agle tower members where pre-puched holes are ot easily accessible. The adapter has a pre-puched 3/4 i hole that allows the istaller to mout cable hagers such as Adrew SapStak sap-i hagers to wireless commuicatios towers or other structures. Stailess steel costructio for log life. Uiversal Adapter Applicatios Sap-I Tower Stadoffs For moutig sap-i hagers to roud support members. Adapter is desiged with 3/4 i pre-puched hole. Adapter provides 2-1/2 i (60 mm) stadoff. All parts are stailess steel or galvaized, kit of 10. Part Number Member Diameter, i (mm) STS3-12 1 2 (25 50) STS3-23 2 3 (50 75) STS3-34 3 4 (75 100) STS3-45 4 5 (100 125) Part Number Descriptio UA-3 Uiversal sap-i adapter, kit of 10 Uiversal Agle Adapter Isert Isert trasitios the uiversal adapter s 3/4 i to a 3/8 i hole diameter, which allows the use of stadard hagers. Part Number Descriptio UAAI Uiversal agle adapter Isert, kit of 10 SapStak Hager Tool Specially desiged pliers make istallatio ad removal of SapStak sap-i hagers extremely easy. The sprig loaded pliers are desiged with a hook that holds ad spreads the hager ope to slip easily over the cable. Serrated pads the squeeze the hager together for effortless isertio ito the moutig structure. Isulated hadle ad a layard hole make it easy to hag o to. Part Number Descriptio SHT-4 SapStak hager tool, quatity 1 ( UA-3 Each part sold separately ( UAAI 10
Cable Istallatio Accessories Cable Hoistig ad Attachmet Achor Rail Adapter Achor rail adapters make cable istallatio fast, secure, ad eat. These oe-piece, oe-size, self-cotaied achor rail adapters require o tools ad sap ito commo strut or achor rail systems, such as UiStrut Metal Framig. The 3/4 i hole accepts commo sap-i hagers. Adapters ca be used for horizotal or vertical cable to produce eatly aliged istallatios o large poles, smokestacks, rooftops, walls, or ay support structure. Uited States Patet: 7,090,174. UiStrut is a registered trademark of the UiStrut Corporatio Part Number Descriptio ARA-22 Achor rail adapter for 0.86" (22 mm) rails (North America stadard), kit of 10 Cluster Support Bracket The cluster support bracket is a versatile meas to support multiple rus of coaxial cable i virtually ay applicatio. The oval desig allows coaxial cable to be ru iside ad outside of the bracket, which maximizes its capacity. Each bracket features 3/4 i holes to accommodate sap-i hagers ad 3/8 i holes for butterfly hagers usig stadard 3/8 i hardware. The cluster support bracket supports seve rus of coaxial cable. Sold i uits of oe, U-bolt hardware sold separately. Part Number CS-B Descriptio Cluster support bracket with U-bolt for 2-3/8" roud member attachmet Uiversal Sap-I Bracket These galvaized steel brackets are desiged to work o both agle ad roud members. They are pre-puched with 3/4 i holes to hold sap-i hagers or stadard hagers. Part Number Descriptio SS-TB2550 Uiversal sap-i bracket, for 1-1/2" to 5-9/16" roud member 2-1/2" to 5" agle member. Accommodates six sap-i or stadard hagers. SS-TB6080 Uiversal sap-i bracket, for 6" to 10-3/4" roud member 6" to 8" agle member accommodates six sap-i or stadard hagers. Sap-I Adapter Bracket This bracket is used i cojuctio with WRAPLOCK ad is used o large, roud members, water towers, or outside of a moopole. The brackets slide o the WRAPLOCK ad hold up to six rus of coaxial cable. You ca use multiple brackets for the umber of rus required for your system. The galvaized steel bracket supports both stadard hagers ad sap-i hagers. Accommodates six rus of sap-i hagers ad four rus of click-o hagers. Part Number Descriptio RM-USBG Sap-i adapter bracket, kit of 10 12395-1 Stailess steel WRAPLOCK PVC Roof Sleeper Support rooftop coaxial cable rus usig the sap-i PVC roof sleepers. PVC roof sleepers are pre-puched with 3/4 i holes to accommodate sap-i hagers. Sleepers are made of a gray 4 i (102 mm) x 4 i (102 mm), UV-resistat PVC material. Part Number MT-F1598 MT-F1599 MT-F1600 Descriptio 4 ru, 22" (559 mm) legth 8 ru, 32" (810 mm) legth 12 ru, 43" (1102 mm) legth 11
Cable Istallatio Accessories Cable Hoistig ad Attachmet Sap-I Adapter Block This sap-i adapter block is desiged to accommodate a sap-i hager o each side of the block. You ca attach this to the tower with our stadard agle adapters or tower stadoffs. Stailess steel costructio. Part Number Descriptio SA-38 Sap-i adapter block, kit of 10 Part Number Attachmet Hardware 243684 Compact agle adapter, see page 16 for details 244350 Ceilig adapter, kit of 10 Roud member adapter (various sizes) see page 16 Flat Member Attachmet Click-O Hagers Click-O Hagers Istall Cable with Oe Easy Click Specifically desiged to support HELIAX coaxial cable, stackable click-o hagers istall i just miutes ad provide a perfect fit that gives your PCS/PCN, cellular, microwave, rural telephoy, GSM, or other telecommuicatios system a professioal appearace, especially i cofied spaces. Available i either sigle or double versios, click-o hagers are maufactured of tough UV-resistat material ad set the stadard for durability, simplicity of istallatio, ad cost effectiveess. Uited States Patet: 5794897. Double Sigle* Part Number Part Number Descriptio L4CLICK L4SCLICK 1/2" hager, kit of 10 L45CLICK 5/8" hager, kit of 10 L5CLICKB L5SCLICKB 7/8" hager, kit of 10 L6CLICK L6SCLICK 1-1/4" hager, kit of 10 L7CLICK L7SCLICK 1-5/8" hager, kit of 10 Roud Member Attachmet Agle Adapter Attachmet Ceilig Adapter Attachmet 12
Cable Istallatio Accessories Cable Hoistig ad Attachmet Click-O Hager Hardware Kits Click-o hager attachmet hardware is available i 3/8 i or M10 sizes. Costructed of stailess steel for durability. Select hardware legth accordig to plaed hager stack height. Each kit cotais 10 threaded rods, 30 uts, 40 flat washers ad 20 lock washers. Note: Click-o hagers accommodate two rus of cable ad ca be stacked up to three deep to hadle up to six rus. Part Number Stack Height Cable Size Rod Legth (# of hagers) i (mm) Imperial 243095-9 1 1/2" or 7/8" 3.75 (95) 243095-5 2 1/2" or 7/8" 5.40 (137) 243095-1 3 1/2" or 7/8" 7.00 (177) 243095-10 1 1-1/4" or 1-5/8" 4.75 (121) 243095-6 2 1-1/4" or 1-5/8" 7.25 (184) 243095-2 3 1-1/4" or 1-5/8" 9.75 (248) Metric 243095-11 1 1/2" or 7/8" 3.97 (101) 243095-7 2 1/2" or 7/8" 5.50 (141) 243095-3 3 1/2" or 7/8" 7.10 (181) 243095-12 1 1-1/4" or 1-5/8" 5.00 (126) 243095-8 2 1-1/4" or 1-5/8" 7.30 (186) 243095-4 3 1-1/4" or 1-5/8" 9.90 (251) Miiature Click-O Hagers Fast, easy istallatio for small cables Now istallig small cables ito hagers is accomplished i oe easy click with miiature click-o hagers. Each compact, miiature click-o hagers accommodates two rus of cable. Miiature click-o hagers are compact ad stackable, makig it easy to istall several rus of cable i cofied spaces. Miiature click-o hagers are cost effective ad durable. With flexible grippig ribs, the hager provides secure support o a rage of cable sizes, ad idexig o the hager body helps alig cables durig istallatio. Specifically desiged to accommodate small corrugated coaxial cables, elliptical waveguide, ad braided cable rus, miiature click-o hagers provide a perfect fit for your istallatio. Hagers are packed i kits of 10. Attachmet hardware made of ati-corrosio coated metal for log service life is sold separately i kits of 10. Uited States Patet: 7,007,900. Select hardware by iteded hager stack height. Part Number Descriptio 68MCLICK Click-o hagers for 6-8 mm cable; FSJ1A, CNT-240, CNT-300 912MCLICK Click-o hagers for 9-12 mm cable; LDF1, EFX2, FSJ2, LDF2, CNT-400, EW380 1316MCLICK Click-o hagers for 13-16 mm cable; FSJ4, LDF4-50A, CNT-500, CNT-600 Part Number 252026-10KT 252027-10KT 252028-10KT 252029-10KT Descriptio Mii agle adapters, M8 tap Sigle stack hardware for mii click-o hagers, M8 thread Double stack hardware for mii click-o hagers, M8 thread Triple stack hardware for mii click-o hagers, M8 thread TIP! Multi-ru hagers are the best choice for istallig cables where space is very limited o crowded towers. 13
Cable Istallatio Accessories Cable Hoistig ad Attachmet KwikClamp Hagers Multiple Ru Cable Hagers for Europea Norms Ideal for multiple ru cable hagers desiged exclusively for Europeastyle towers, cost effective KwikClamp cable hagers elimiate the eed for drillig ad adapters. These self-clampig cable hagers attach directly to roud or flat tower members, providig sturdy, reliable, log-term support to systems. Hagers are sold i kits of 10. KwikClamp Orderig Iformatio See the table below to build a KwikClamp part umber for your applicatio. 1 Select your cable size ad ote the base part umber show below that cable size. 2 Select the tower member type ad the umber of cable rus for your applicatio. 3 Locate the part umber detail at the juctio of the cable size colum ad the tower member type row. The base part umber plus the part umber detail idicates the full part umber. For example, the KwikClamp hager part umber for three rus of 7/8 ich cable o a 8 25 mm roud tower member is L5CLAMP-RDN-3. Cable ad Hager Type Cable Size RG8 1/2" 5/8" 7/8" 1-1/4" 1-5/8" Base Part Number R8CLAMP-( ) L4CLAMP-( ) L45CLAMP-( ) L5CLAMP-( ) L6CLAMP-( ) L7CLAMP-( Tower Member Type # of Rus Part Number Detail 3-11 mm 2 UNV-2 8-25 mm roud or 3-25 mm flat plate 1 RDN-1 RDN-1 RDN-1 RDN-1 RDN-1 2 RDN-2 RDN-2 RDN-2 RDN-2 RDN-2 3 RDN-3 RDN-3 RDN-3 RDN-3 RDN-3 14
Cable Istallatio Accessories Cable Hoistig ad Attachmet A B C Stadard Hagers Stadard Hagers ad Hardware For Security ad Flexibility Stadard hagers are desiged for easy istallatio. The clamp lockig bolt ad ut are pre-assembled ad captivated to miimize istallatio labor. Proper tesio is easy to determie. The hager is simply tighteed util there is a 5/16 i gap betwee the clamp legs. The predrilled hole for 3/8 i or 1/2 i moutig hardware ad slots for roud member adapter clamps further simplify istallatio. See pages 16 18 for accessories to adapt these hagers to most tower cofiguratios. Please refer to Appedix 6 for specific recommedatios. Hager Part Number Cable Size Photo Referece 43211A 3/8" A 43211A 1/2" A 42396A-9 5/8" B 42396A-5 7/8" B 42396A-1 1-1/4" B 42396A-2 1-5/8" B 42396A-4 2-1/4" B 31766A-11 3" C 31766A-10 4" C Hager Waveguide Part Number Size Photo Referece 31766A-9 EW17 C 31766A-10 EW20 C 31766A-11 EW28 C 42396A-4 EW37 B 42396A-16 EW43 B 42396A-8 EW52 B 42396A-7 EW63 B 42396A-1 EW64 B 42396A-11 EW77 B 42396A-5 EW85 B 42396A-5 EW90 B 42396A-9 EW127A B 42396A-9 EW132 B 43211A EW180 B 43211A EW220 B 43211A EW240 B Hardware Sets, Kit of 10 Imperial kits iclude 3/8 i fillister-head bolts, lock washers, ad uts for attachmet of stadard hagers to drilled tower members. The metric kit icludes M10 bolts ad lock washers for use with metric agle adapters. Part Number Legth 31769-5 3/4" (19 mm) 31769-1 1" (25 mm) 243684-MH Metric M10 19 mm Additioal Moutig Hardware Threaded Rod Support Kit for Stadard Hagers. Use to mout hagers away from supportig structure, uder cable bridge, ad iside equipmet room. Icludes 3/8 i diameter threaded rod, galvaized ceilig moutig plate, uts, ad washers. Attach to agle tower members with 31768A agle adapters. Attach to roud tower members with 30848 series tower stadoffs. All compoets are stailess steel, except ceilig moutig plate. Part Number Part Number Rod Legth, i (mm) Kit of 1 Kit of 5 31771 31771-4 12 (305) 31771-9 31771-6 24 (610) 31771-10 36 (915) 15
Cable Istallatio Accessories Cable Hoistig ad Attachmet Agle Adapter Galvaized ad No-marrig For moutig 1/2 i to 2-1/4 i cable hagers to agle tower members up to 3/4 i (19 mm) thick. Hager attachmet hardware sold separately, kit of 10. Part Number Descriptio 247763-I Tapped for 3/8" hardware 247763 Tapped for metric hardware Agle Adapter Stailess steel, kit of 10. For moutig 1/2 i to 4 i cable hagers to agle tower members up to 7/8 i (22 mm) thick. Icludes hager attachmet hardware. Part Number 31768A 31768A-M Descriptio 3/8" hardware Metric hardware Compact Stailess Steel Agle Adapters These compact, lightweight, high quality stailess steel agle adapters provide a cost savig optio to stadard adapters for may wireless systems that use HELIAX coaxial cable. These compact agle adapters are suitable for use with sigle rus of HELIAX cable up to 2-1/4 i i diameter. Whe used with our stackable click-o hagers, they ca accommodate up to six rus of 1-1/4 i cable or smaller cable ad up to four rus of 1-5/8 i cable. Icludes 3/8 i or mid-hager attachmet hardware, kit of 10. Part Number Descriptio 243684 Imperial agle adapter, kit of 10 243684-M Metric agle adapter, kit of 10 Roud Member Adapter Stailess steel clamps to mout 1/2 i to 4 i cable hagers to roud support members. Two each are eeded for 3 i ad 4 i cable hagers, kit of 10. Part Number Member Diameter, i (mm) 31670-1 1 2 (25 50) 31670-2 2 3 (50 75) 31670-3 3 4 (75 100) 31670-4 4 5 (100 125) 31670-5 5 6 (125 150) 31670-6 6 8 (150 200) 16
Cable Istallatio Accessories Cable Hoistig ad Attachmet Tower Stadoff Adapters with roud member clamps ad hardware for 1/2 i to 4 i hagers. All parts are stailess steel or galvaized, kit of 10. Part Number Member Diameter, i (mm) 30848-5 0.75 1.5 (20 40) 30848-4 1.5 3.0 (40 75) 30848-1 3 4 (75 100) 30848-2 4 5 (100 125) 30848-3 5 6 (125 150) Nylo Cable Ties For Jumper Cable Attachmet Cable ties secure cable budles where space is limited. They are a excellet choice for orgaizig jumper cables withi ad betwee radio cabiets ad for budlig jumper cables. Nylo cable ties provide support for small diameter cable 1/4 i to 1/2 i. Typical applicatios iclude securig jumper cables i buildigs ad alog horizotal atea moutig arms. Part Number Descriptio 40417 Nylo cable ties, 5/16" wide 14.5" log, kit of 50 Clamp Head Part Number Descriptio MF39901-10 Clamp head, kit of 10 45 Adapter Use with agle adapter ad threaded rod support kit to place a hager at a waveguide bed, kit of 10. Part Number Descriptio 42334 45 degree adapter, kit of 10 17
Cable Istallatio Accessories Hager Selectio Guide Hager Type Costructio SapStak Hagers Stailess steel KwikClamp Hagers Stailess steel ad plastic Click-O Sigle, Double, or Miiature Hagers Egieered plastic sigle or double Stadard Hagers Stailess steel Support/ Hoistig Grips* Ti coated broze Cable Ties** Nylo Cable rus supported 1 to 3 1 to 3 2 to 6 1 1 1 Primary applicatios Towers with pre-puched cable ladders, sap-i accessories New or existig towers Rooftops, water towers, ad towers with limited space Tower istallatios subject to high wid, high corrosio, ad high ice Moopole towers Jumper cables ad iter-rack cablig Typical istallatio time (miutes)*** 7 15 20 20 2 Key feature Attaches cables i compact budles, savig tower space Built i tower adapter Stackable up to three high Stailess steel tesioig hardware Calibrated clamp provides permaet cable support Uiversal fasteig Beefits Fastest hager istallatio; No additioal hardware eeded Attaches cables i compact three ru budles Impervious to evirometal extremes Uiversal hager accommodates all corrugated cables Requires o additioal hardware for tower attachmets Fits roud, flat agle, ad C-chael tower members Quick istallatio UV stable Attaches cables i compact six ru budles Versatile ad adaptable to almost ay applicatio Easy to istall click-o desig UV stable Impervious to evirometal extremes Adaptable to various tower cofiguratios Quick istallatio Moopole applicatio Accommodates sigle ru of cable Fits most cable sizes ad tower members Quick istallatio Iexpesive Accommodates sigle ru of lightweight cable Attachmet capability (Tower member type) 3/4" drilled cable ladder Various adapters (see pages 10 11) Roud member Agle member chael sectio Cable ladders 3/8" (M10) drilled hardware ladder Various adapters (see pages 12 13) 3/8" (M10) drilled cable ladder Various adapters (see pages 16-17) All towers ad moopoles Roud member, agle member, cable ladders Additioal parts eeded Noe Noe Threaded rod ad hardware Tower attachmet hardware kit Noe Noe Tower adapters (allows hager attachmet to various tower types) Cluster mout Uiversal tower adapter Achor rail adapter Noe required Roud member adapter Agle adapter Roud member adapter Agle adapter Noe required Noe required Coditios * Support grip or hoistig/support grip required with all cable istallatios ** Should oly be used with 1/2 i cable ad smaller *** Istallatio time based o a 100 ft (30 m) ru of 7/8 i cable with 3 ft (1 m) hager spacig. Moopole applicatio applied 200 ft itervals, 2 miutes. 18
Cable Istallatio Accessories Weatherproofig NEW! WeatherShield Reusable Coectio Protectio Eclosures For I-Lie Coectors, Ateas, ad Tower Top Devices Complete your trasmissio lie istallatio with WeatherShield coectio protectio eclosures which seal ad protect coectors from the eviromet. This robust, oe-piece weatherproofig eclosure offers a additioal measure of system protectio by providig a high temperature resistat, watertight seal aroud the coectors while also helpig to dampe vibratio that ca loose coector iterfaces over time. The reusable eclosure cotais a iovative trifold seal that provides complete moisture block for istalled coectors. The ease of istallatio o hard-to-reach coectios ad the log-term protectio provided by this eclosure makes it the most cost-effective solutio available today. The WeatherShield coectio protectio eclosure takes just secods to istall. Simply place the housig aroud the coector ad sap the tabs together. No tapes, tools, or shrik tubes are required. The Adrew WeatherShield coectio protectio eclosures will accommodate Type N ad 7-16 DIN coectios ad are compatible with Adrew HELIAX cable, SureFlex cable assemblies, ad most brads of stadard jumpers. Part Number Descriptio AWE-A12 Eclosure for 1/2" atea coectio/device AWE-7812 Eclosure for 7/8" to 1/2" coectios AWE-11412 Eclosure for 1-1/4" to 1/2" coectios AWE-15812 Eclosure for 1-5/8" to 1/2" coectios More Iformatio: See the istallatio video at www.adrew.com/ products/tras_lie/heliax/weathershield.aspx 19
Cable Istallatio Accessories Weatherproofig Weathertight Seal Quickly Istalls i Three Miutes Complete your trasmissio lie istallatio with the premier weatherproofig product to seal ad protect coectors, splices, surge protectors, ad jumper-to-atea iterfaces from the eviromet. Adrew 3M Cold Shrik weatherproofig protects your ivestmet ad your system s performace. No Tools Required Cold Shrik weatherproofig simply slips over the coectio ad compresses aroud the iterface. No tapes or heat gus are required for sealig or shrikig. Simply place the Cold Shrik kit over the cable ad coector, make the coectio, ad uwid the pull-tab applicator. Oce it is collapsed, its cotiuous compressio desig forms a watertight seal aroud the cable. Developed joitly by Adrew ad 3M Corporatio, Cold Shrik weatherproofig has prove itself i thousads of high power cable istallatios for more tha 15 years. Fits up to 2-1/4 i HELIAX Cable Kits are available for trasitios from larger to smaller diameter cable, such as 1-5/8 i to 1/2 i, or for same diameter cable, such as 1/2 i to 1/2 i. See the table for part umbers. 3M ad Cold Shrik are trademarks of Miesota Miig ad Maufacturig Compay Part Number Miimum Applicatio Diameter, i (mm)* Kit Coverage, Cable Size to Cable Size Coectors, 7-16 DIN or Type N 245173 0.63 0.41 (16 10.0) 3/8" through 1/2" to 3/8" through 1/2" 241475-13 0.80 0.29 (20 7.4) 1/4" through 5/8" to 1/4" through 1/2" 245171 0.84 0.29 (2 7.4) 7/8" to 1/4" through 1/2" 245172 1.20 0.29 (30 7.4) 1-5/8" or 1 1/4" to 1/4" through 1/2" 245175 1.40 0.41 (36 10.0) 2-1/4" to 1/4" through 1/2" Ateas, filters, amplifiers, 7-16 DIN or Type N** 245174 0.84 0.29 (21 7.4) 1/2" 7/8" jumpers to atea * Miimum applicatio diameter is the fully compressed diameter of each tube i the kit. **Adrew 3M Cold Shrik Weatherproofig is completely compatible with Adrew base statio ateas. See special publicatio SP50030 for specific applicatio iformatio o the use of Cold Shrik for atea iterfaces. Self-fusig Tape Self-fusig ad markig tape is a time savig alterative to traditioal butyl rubber sealat tapes. The silicoe tapes are produced from specially formulated UV-resistat silicoe rubber. Whe applied to RF coectors, the tape wraps bod together givig the coectio a additioal layer of protectio agaist water, dirt, ad vibratio. Compared to covetioal tapes, self-fusig tape is both easy to apply ad remove from coectios. Available i three colors optios, self-fusig tape ca also be used to color code tower top cable istallatios, makig it easy to locate cables for moitorig purposes. Part Number Descriptio Quatity FT-TB Self-fusig tape, black.030" x 1.5" x 15' 2 rolls FT-TR Self-fusig tape, red.030" x 1.5" x 15' 2 rolls FT-TW Self-fusig tape, white.030" x 1.5" x 15' 2 rolls 20
Cable Istallatio Accessories Weatherproofig Stadard Weatherproofig Kit for Coectors ad Ateas The applicatio of sealig materials to atea cable coectios protects them from weather coditios. These iclude moisture peetratio ad looseig of coectios from vibratios caused by strog wids. Adrew Corporatio recommeds weatherproofig these coectios with stadard weatherproofig tapes such as butyl ad plastic electrical tapes. d Mai feeder cable-to-jumper cable coectio d Jumper cable-to-atea coectio This kit provides a additioal moisture seal for cable coectios. It also prevets looseig of coectios from vibratio or other exteral stresses, which would evetually allow moisture peetratio. The sealed coectio is suitable for typical exposed ad buried cable applicatios. Weatherproofig Coectios Per Kit Applicatios Coectio Type Per Kit 2-1/4" to 1/2" (57 mm to 13 mm) 2 1-5/8" to 1/2" (41 mm to 13 mm) 2 1-1/4" to 1/2" (32 mm to 13 mm) 2 7/8" to 1/2" (22 mm to 13 mm) 4 1/2" to 1/2" (13 mm to 13 mm) 12 7/8" to atea, amplifier, device (22 mm to 13 mm) 12 1/2" to atea, amplifier, device (13 mm to 13 mm) 12 Istallatio Tips d Whe applied, the tape must be above 32 F (0 C) to esure adhesio. Keep tape warm by carryig i coat pockets. d Do ot stretch the tape. Apply oly eough tesio to provide a smooth wrap. d Smooth each wrapped layer with your hads to esure full adhesio. d Do ot pull the tape to tear tape always cut it. (Pulled tape evetually uravels, decreasig protectio.) d Add extra fial layers of tape i warmer climates where there will be log exposure to damagig ultra violet (UV) rays. Two or three extra layers of tape will provide additioal UV protectio. d Whe wrappig tape, overlap the tape to half-width. d Esure vet or drai holes at the bottom of the atea or device are ot covered with weatherproofig tape. Adrew 221213 Weatherproofig Kit cotais: 2 rolls of 3/4 i x 66 ft black plastic tape 1 roll of 2 i x 20 ft black plastic tape 6 rolls of 2-1/2 i x 24 i butyl rubber tape Stadard Weatherproofig Tape Part Number Descriptio 221213 Complete kit, black 221213-S Complete kit, slate gray 42615-10 2-1/2" x 24" butyl rubber roll 9905-41 3/4" x 66' black plastic tape roll 9905-71 2" x 20' black plastic tape roll Colored Electrical Markig Tape Colored tape is a coveiet way to mark ad code cable rus. Six differet colors are available i 3/4 i x 66 i rolls. Sold i idividual rolls. Part Number Descriptio CM-TB Blue, 3/4" x 66' (19.1 mm x 20.1 m) CM-TBR Brow, 3/4" x 66' (19.1 mm x 20.1 m) CM-TG Gree, 3/4" x 66' (19.1 mm x 20.1 m) CM-TR Red, 3/4" x 66' (19.1 mm x 20.1 m) CM-TW White, 3/4" x 66' (19.1 mm x 20.1 m) CM-TY Yellow, 3/4" x 66' (19.1 mm x 20.1 m) 21
Cable Istallatio Accessories Cable Etry ArrestorPort II Itegrated Trasmissio Lie Etry/Groud System The ArrestorPort II itegrated buildig etry/groud system redefies the way you achieve cable shelter etry ad groudig. Traditioal istallatios rely o a piecemeal approach that steals time ad icreases costs. ArrestorPort II uifies the istallatio of etry ports, Arrestor Plus surge protectors, ad trasmissio lie groudig ito a itegrated etry/groud system. Arrestor Plus surge arrestors cut costs, save valuable iterior space, ad protect your reveues ad persoel from the damagig effects of lightig strikes. The ArrestorPort II itegrated wall etry/groudig system kit cosists of a etry pael ad a 1/8 i solid copper groud bar assembly with assembly hardware, weather strippig, ad weatherproof sealig caps for all etry ports. Use with Arrestor Plus surge arrestors (pages 37 ad 38, order separately) ad stadard cable boots (page 22 ad 23, order separately). Part Number Descriptio APORT-13-4 Provides moutig positios for 13 bulkhead mout surge arrestors ad icludes four 4" holes for waveguide etry Multiple Etrace Wall/Roof Feed-Thru Plate Plate with oe or more 4 or 5-ich holes. Weatherproof sealig caps icluded. Use with the correspodig size rubber cable boot (sold separately). Part Number Number Height, Width of Opeigs i (mm) i (mm) 4 i (102 mm) Etry Opeig, Multiple Etrace Plate 204673-1 1 7.0 (178.0) 7 (178) 204673-2 1 5.0 (127.0) 5(127) 204673-2A 3 9.5 (241.3) 20 (508) 204673-4 4 9.5 (241.3) 25.5 (648) 204673-6 6 17.5 (444.0) 23 (584) 204673-8 8 17.5 (444.0) 25.5 (648) 204673-9 9 23.0 (584.0) 23.0 (584) 204673-10 10 9.5 (241.3) 31.0 (787) 204673-12 12 25.5 (648.0) 25.5 (648) 204673-16 16 25.5 (648.0) 25.5 (648 204673-18 18 25.5 (648.0) 39.5 (1003) 204673-20 20 28.8 (731.0) 31.0 (787) 204673-24 24 31.0 (787.0) 39.5 (1003) Sigle Etrace Wall/Roof Feed-Thru Assembly Icludes rubber boot, clamp, ad alumium plate. Order from table. Part Number Cable Size SCE-12 1/2" SCE-58 5/8" SCE-78 7/8" SCE-114 1-1/4" SCE-158 1-5/8" SCE-214 2-1/4" Stadard Cable Etry Boots Use with feed-thru plate with the correspodig size etry hole. Cable Boot Cable Number of Part Number Size Holes i Boots 4 i (102 mm) Cable Boots 204679A-17 1/4" foam 3 204679A-19 3/8" foam 1 204679A-5 1/2" foam 1 204679A-7 1/2" foam 3 204679A-6 1/2" air 1 204679A-1 1/2" air 3 204679A-16 1/2" 4 204679A-13 5/8" 1 204679A-14 5/8" 3 204679A-2 7/8" 1 204679A-18 7/8" 2 204679A-15 7/8" 3 204679A-3 1-1/4" 1 204679A-4 1-5/8" 1 204679A-8 2-1/4" 1 204679A-9 3" 1 CAP-4 Blak cap 0 5 i (127 mm) Cable Boots 48939A-16 3/8" foam 3 48939A-6 1/2" foam 1 48939A-8 1/2" foam 3 48939A-7 1/2" air 1 48939A-5 1/2" air 3 48939A-17 1/2" 4 48939A-14 5/8" 1 48939A-15 5/8" 3 48939A-1 7/8" 1 48939A-2 7/8" 3 48939A-3 1-1/4" 1 48939A-4 1-5/8" 1 48939A-9 2-1/4" 1 48939A-10 3" 1 EP-CAP5 Blak cap 0 Hole Plugs Part Number Descriptio PLUG-12 Plug, 1/2", for uused cable boot holes, kit of 5 PLUG-78 Plug, 7/8", for uused cable boot holes, kit of 5 PLUG-114 Plug, 1-1/4", for uused cable boot holes, kit of 5 PLUG-158 Plug, 1-5/8", for uused cable boot holes, kit of 5 22
Cable Istallatio Accessories Cable Etry Elliptical Waveguide Stadard Cable Etry Wall ad Roof Feed-Thru ad Boots A Sigle etrace wall/roof feed-thru assembly. Icludes rubber boot, clamp, ad galvaized steel plate. Order from table below. B Sigle etrace wall/roof feed-thru assembly for EW37 EW240. Icludes rubber boot, clamps, ad alumium plate. C Waveguide boot for use with 204673 ad 48940 series multiple etrace wall/roof feed-thru plates. Boot diameter of 4 i or 5 i (102 or 127 mm) is available to match plate. Order idividually from table below. A, B Sigle Etrace Wall/Roof Feed-Thru Assemblies Sigle Etrace For Waveguide Photo Size Referece Part Number EW17 A 35849A-10 EW20 A 35849A-9 EW28 A 35849A-13 EW37 B 245314-37 EW43 B 245314-43 EW52 B 245314-52 EW63 B 245314-63 EW64 B 245314-64 EW77 B 245314-77 EW85 B 245314-85 EW90 B 245314-90 EW127A B 245314-127A EW132 B 245314-132 EW180 B 245314-180 EW220 B 245314-220 EW240 B 245314-240 A A C B C Waveguide Boots Part Number by Diameter For Waveguide Size 4 i (102 mm) 5 i (127 mm) EW17 EW20 EW28 EW37 WGB4-37 WGB5-37 EW43 WGB4-43 WGB5-43 EW52 WGB4-52 WGB5-52 EW63 WGB4-63 WGB5-63 EW64 WGB4-64 WGB5-64 EW77 WGB4-77 WGB5-77 EW85 WGB4-85 WGB5-85 EW90 WGB4-90 WGB5-90 EW127A WGB4-127 WGB5-122 EW132 WGB4-132 WGB5-132 EW180 WGB4-180 WGB5-180 EW220 WGB4-220 WGB5-220 EW240 WGB4-240 WGB5-240 B C C 23
Cable Istallatio Accessories Istallatio Aids Better Coectios Yield Superior System Performace The coector iterface is oe of the most critical factors affectig trasmissio lie operatio. Eve experieced techicias fid the job more difficult whe equipped with makeshift devices or a iadequate array of simple had tools, ad it oly takes a sigle faulty coectio to degrade performace ad threate your operatio s reveues. EASIAX Plus Automated Cable Preparatio Tool For Reliable Cable Preparatio i 10 Secods Cable istallers ad system desigers ca dramatically reduce cable preparatio time ad expese while improvig overall system performace with the EASIAX Plus automated cable preparatio tool. Fit the EASIAX Plus tool to ay stadard power drill, ad it removes the cable jacket, outer coductor, ad foam, the cuts back ad chamfers the ier coductor to the correct dimesios for coector attachmet all i less tha 15 secods. The EASIAX Plus automated method of cable preparatio meas cable coectios that are more cosistet, more reliable, ad more repeatable. EASIAX 2 Cable Preparatio Tools Improve system performace ad cut istallatio time with specialized EASIAX 2 cable preparatio tools. Wireless istallatio specialists require tools that provide precisio ad cosistecy whe attachig coectors. The tools provide a clea cut of the coaxial cable ad elimiate copper shavigs. This lesses the potetial for high VSWR ad IMD readigs. EASIAX 2 tools also reduce the time spet preparig cable for coector attachmet by 40%, compared to usig commo tools. Part Number CPTV2-158 CPTV2-114 CPTV2-BK Descriptio Cable preparatio tool for use with AL, AVA, VXL, ad LDF 1-5/8" cable Cable preparatio tool for use with VXL ad LDF 1-1/4" cable Replacemet blade kit for CPTV2 tools Tool Part Number Cable Type Coector Type CPT-L1 LDF1-50 Stadard coectors CPT-E2L2N EFX2-50 Type N coectors CPT-E2L2DIN EFX2-50 7-16 DIN coectors CPT-E2L2N LDF2-50 Type N coectors CPT-E2L2DIN LDF2-50 7-16 DIN coectors CPT-F4 FSJ4-50B FSJ4 versio two coectors CPT-L4ARC1 LDF4-50 7-16 DIN or Type N stadard, RigFlare, HL4RP-50 OePiece, or Positive Stop coectors CPT-L45RC LDF4.5-50 RigFlare coectors CPT-78U LDF5-50A 7-16 DIN or Type N stadard, RigFlare, AVA5-50 OePiece, or Positive Stop coectors VXL5-50 AL5-50 CPTL6 LDF6-50 7-16 DIN or Type N stadard, RigFlare, OePiece, or Positive Stop coectors CPT-158U LDF7-50 7-16 DIN or Type N stadard, RigFlare, AVA7-50 OePiece, or Positive Stop coectors VXL7-50 AL7-50 EASIAX Replacemet Blades Tool Replacemet Blade Kit Part Number Part Number CPT-L1 CPT-BKS1 CPT-F4 CPT-BK CPT-L4ARC1 CPT-BKS1 CPT-E2L2DIN CPT-BKS1 CPT-E2L2N CPT-BKS1 CPT-L45RC CPT-BKS1 CPTL6 CPT-BK6 CPT-158U CPT-BK7 CPT-78U CPT-BK5 Recommeded drill size for tools for 1/4 i through 1/2 i cables is 3/8 i torque value with 12 volt miimum. Cordless drill 14.4 miimum voltage,400 650 RPM. Recommeded drill size for tools for 7/8 i through 1-5/8 i cable is 1/2 i. Cordless drill 15.4 miimum voltage, 400 650 RPM. For detailed iformatio o cable preparatio, see Special Publicatio SP50262. 24
Cable Istallatio Accessories Istallatio Aids EASIAX Cable Preparatio Tool For Fast, Precisio Cuts i 15 Secods It s Accurate Cuts precisely at crest of copper corrugatio at the exact distace required for easy coector attachmet. Clea cut makes flarig easier tha ever. Precise blade depth makes it impossible to cut ier coductor. It s Cosistet Every cut by every techicia o every iterface of ay cable will be exactly the same. It s oe more way to esure cosistet electrical performace for your cable system. EASIAX precisio cuttig tool is the oly cuttig tool made exclusively for HELIAX coaxial cable. Cable Types Cuttig Tool Replacemet Blades Part Number Descriptio Part Number, kit of 5 FSJ1, FSJ4, ETS1, RXL1* Series MCPT-1412 Cuts jacketig ad outer coductor 209874 FSJ2, FSJ4,ETS2 Series MCPT-3812 Cuts jacketig ad outer coductor 209874 LDF4, HL4RP-50A, RXL4** Series MCPT-L4 Cuts outer coductor ad scores jacketig MCPT-BK4 LDF5, VXL5, AVA5, RXL5, AL5-50 Series MCPT-78 Cuts outer coductor ad ier coductor MCPT-BK5 ad scores jacketig AVA5 A5MCPT-78 Cuts outer coductor ad ier coductor A5MCPT-BK5 ad scores jacketig Remove 2 of jacketig MCPT-78 Rotatio * Except RXL1-1RNT ** Except RXL4-(1, 2 or 3) RNT 25
Cable Istallatio Accessories Istallatio Aids Coector Attachmet Torque Wreches Preset to Adrew Specificatios Adrew torque wreches attach ay type of HELIAX coectors to HELIAX LDF4.5, LDF5, LDF6, LDF7, ad LDF12 coaxial cables. All are desiged with a mechaism to audibly otify the istaller that the proper torque has bee reached ad release the pressure. Part Number Cable Type Coector Type 247696 LDF4-50A OePiece 245154 LDF4-50A RigFlare 244376 LDF4.5-50 RigFlare ad Stadard 244378 LDF5-50A, OePiece, RigFlare, AVA5-50 ad Stadard ad VXL5-50 244375 LDF6-50 RigFlare ad Stadard 247698 LDF6-50 LDF6 OePiece oly 244374 LDF7-50A OePiece, RigFlare ad Stadard 244374 VXL7-50 OePiece, RigFlare ad Stadard 244373 LDF12-50 Stadard 244379 All Type N couplig ut 244377 All 7-16 DIN couplig ut 247696 LDF4-50 OePiece Alumium Groudig Kit Tool Now istallers ca prepare trasmissio lie cable for groudig kit istallatio i oe simple, precise step ad without usig a kife! The Adrew alumium groudig kit preparatio tool takes just secods to use: simply sap the tool i place aroud the cable ad rotate. I oe step the tool removes the exact amout of jacketig ecessary to attach the groudig strap. The groudig kit preparatio tool is a maually operated cuttig device that quickly trims away a sectio of cable jacket for the purpose of groudig strap istallatio. The tool is ideal for use o cables mouted close to structures ad other cable rus, ad will ot scrape or damage the cable s outer coductor. Part Number Cable Type Groudig Kit Type GKT-F4A FSJ4 Stadard GKT-L4A LDF4 Stadard, CSGL, SGL, ad SGPL series GKT-78A LDF5, VXL5, AVA5, AL5 Stadard, CSGL, SGL, ad SGPL series GKT-114A LDF6 Stadard, CSGL, SGL, ad SGPL series GKT-158A LDF7, VXL7, AVA5, AL7 Stadard, CSGL, SGL, ad SGPL series Part Number Replacemet Blade Kit GKT-F4A GKT-BKF4 GKT-L4A GKT-BK512 GKT-78A GKT-BK512 GKT-114A GKT-BK67 GKT-158A GKT-BK67 Crimpig Tool Used to attach crimp-o lugs for stadard ad SureGroud series. Not required for kits havig factory-attached lugs. Part Number 207270 26
Cable Istallatio Accessories Istallatio Aids Attachmet Tool Kits Cable Size Tool Part Number Descriptio Easier Coectios The coector iterface is oe of the most critical factors affectig trasmissio lie operatio. Eve experieced techicias ca have a hard time whe equipped with makeshift devices or a iadequate array of simple had tools, ad it oly takes a sigle faulty coectio to degrade performace ad threate your operatio s reveues. Selectio The table is desiged to help you select the right tools for each cable size. Uder each cable size you will fid a list of part umbers for the appropriate cable preparatio tools, cable coditioig tools, spaer ad torque wreches, ad groudig kit preparatio tools. You ll have the optio of selectig a maual or automated cable preparatio tool. Uder the idividual tools you will fid the torque wreches for the coector iterface uts. Geeral Purpose 1/4" 3/8" 1/2" F4 F4 ad L4 TB-COMP-KIT *MCPT-1412 224361 224362 244494 MCPT-3812 224361 224362 244494 CPT-F4 MCPT-1412 241953 224361 224362 244394 Complete tool box kit icludes all idividual tools marked with a asterisk i the list below. Maual cable preparatio tool for 1/4" FSJ1-50 cable Cut-off tool 7/32" Cut-off tool 8/32" Cut-off tool 9/32" Maual cable preparatio tool for 3/8" FSJ2-50 cable Cut-off tool 7/32" Cut-off tool 8/32" Cut-off tool 9/32" Automated/maual cable preparatio tool for 1/2" coaxial superflexible cable Maual cable preparatio tool for 1/2" superflexible FSJ4-50B cable Chamfer tool Cut-off tool 7/32" Cut-off tool 8/32" Cut-off tool 9/32" 1/2" L4 CPT-L4ARC1 247696 245154 MCPT-L4 Automated/maual cable preparatio tool for 1/2" coaxial cable 21 mm torque wrech for L4 OePiece coectors 3/4" torque wrech for L4 RigFlare coectors Maual cable preparatio tool for 1/2" LDF4-50A cable GKT-L4A GKT-BK512 Alumium groudig kit strippig tool for LDF4 cable Replacemet blade kit for groudig kit strippig tool for LDF4 cable 7/8" *MCPT-78 CPT-78U 244378 245516 244459-5 GKT-78A GKT-BK512 Maual cable preparatio tool for 7/8" cable Automated cable preparatio tool for 7/8" cable 1-1/4" torque wrech for 7/8" coectors 1-3/8" ope ed wrech for OePiece 7/8" coectors, fits body of Positive Stop coectors 1-1/4" ope ed wrech for 7/8" coectors, fits clampig ut of Positive Stop coectors Alumium groudig kit strippig tool for 7/8" cable Replacemet blade kit for plastic groudig kit strippig tool for 7/8" cable *This tool is icluded i the complete tool kit box, TB-COMP-KIT. 27
Cable Istallatio Accessories Istallatio Aids Cable Size 1-1/4" cable 1-5/8" Idividual Tools Tool Part Number CPTV2-114 CPTV2-BK CPTL6 244375 247698 GKT-114A GKT-BK67 244459-6 CPTV2-158 CPTV2-BK CPT-158U 244374 244459-7 GKT-158A GKT-BK67 244379 244377 *224352 *224354 *224355 *224356 *224360 *224363 *224368 *224373 *224380 *224395 *114468 *114469 Descriptio Maual cable preparatio tool for 1-1/4" cable Replacemet blade for CPTV2-114 Automated cable preparatio tool for 1-1/4" LDF6 cable 1-7/8" torque wrech 1-1/4" stadard or RigFlare coectors 1-3/4" torque wrech for 1-1/4" OePiece coectors Alumium groudig kit strippig tool for 1-1/4" cable Replacemet blade kit for groudig kit strippig tool for 1-1/4" cable 1-7/8" ope ed wrech Maual cable preparatio tool for 1-5/8" cable Replacemet blade for CPTV2-158 Automated cable preparatio tool for 1-5/8" cable 2-1/4" torque wrech for 1-5/8" coectors 2-1/4" ope ed wrech for 1-5/8" coectors Alumium groudig kit strippig tool for 1-5/8" cable Replacemet blade kit for groudig kit strippig tool for 1-5/8" cable Type N couplig ut torque wrech 7-16 DIN couplig ut torque wrech Safety kife Ruler Grease brush Poit file Pi aligmet tool Cable flare tool LDF4 Cable flare tool LDF5 Cable flare tool LDF6 Pi depth gauge, Type N male Pi depth gauge, Type N female Pi depth gauge, 7 16 DIN male Pi depth gauge, 7 16 DIN female *This tool is icluded i the complete tool kit box, TB-COMP-KIT. 28
LIGHTNING PROTECTION ( Groudig Kits ( Groudig Bars ( Surge Arrestors
Lightig Protectio Groudig Kits Trasmissio Lie Groudig A well desiged system uses groudig kits to provide a bod betwee the cable ad the tower/earth groud system. Oe groudig kit is recommeded at tower top, tower bottom, at 200 ft (60 m) itervals (where applicable), ad at the etrace to the equipmet shelter. Adrew solid copper groudig kits have passed Uited States Air Force lightig simulatio tests ad meet MIL-STD- 188-124A. The o-braided solid copper costructio of all Adrew groudig kits elimiates corrosio caused by moisture retetio ad wickig. A heat shrik tube protects the cable termial coectio. Groudig Poit 1 Groudig Kit Selectio Several groudig kit optios are available to meet the requiremets of ay trasmissio lie groudig applicatio. d Compact SureGroud groudig kits provide the fastest, easiest istallatio with the highest degree of lightig protectio. Their self-sealig desig clips ad locks oto the cable i less tha a miute. d SureGroud groudig kits, a idustry favorite, offer clip o attachmet with taped weatherproofig. d Stadard groudig kits provide the best groudig solutio for elliptical waveguide. The copper groudig strap is coiled aroud the cable ad weatherproofed with tape. d Uiversal groudig kits ca be applied to a broad rage of coaxial or elliptical trasmissio lies. Groudig Poit 4 (Rus loger tha 200 ft) ( Compact SureGroud ( SureGroud ( Stadard Groudig Poit 2 Groudig Poit 3 Heavy Duty Groud Lead Adrew groudig kits use heavy duty 6 gauge groud leads to maximize performace. The MIL-STD-188-124B compliat copper groud lead reduces dc resistace. The extremely pliable jacket provides protectio ad makes it easy to maeuver the lead ito positio for attachmet to the dow coductor. d Solid copper costructio for high curret hadlig capability, compatibility with copper cable outer coductors d Meets military stadards at commercial prices. d Provides certaity of cotiued operatio, tested at a idepedet laboratory Groudig Kit Selectio Guide Compact SureGroud SureGroud Stadard Uiversal Key Feature Over-molded weatherproof Preformed clip-o strap Wraparoud groudig strap Multiple cable size desig for easy, fast istallatio wraparoud groudig strap Beefits Uiform istallatio compact Requires o tools Fits stadard coaxial cable Breakaway desig fits desig for budled istallatio for istallatio ad elliptical waveguide multiple sizes of coaxial cable ad elliptical waveguide Istallatio Time Less tha 1 miute About 3 miutes About 6 miutes About 7 miutes Costructio Preformed copper Pre-tesioed copper Copper groudig strap Copper groudig strap groudig strap groudig clip Over-molded weatherproof Stadard weatherproofig Stadard weatherproofig Stadard weatherproofig boot, lockig bail 30
Lightig Protectio Groudig Kits NEW! Compact SureGroud Groudig Kits Now wireless commuicatios system istallers ad desigers ca protect their systems from the effects of lightig easier ad at lower cost. The ew Compact SureGroud groudig kit, available oly from Adrew, is a oe-piece groudig assembly with the weatherproofig molded right ito the groudig strap. Compact SureGroud groudig kit features: Easy attachmet d Self-lockig, self-sealig weatherproof eclosure elimiates loose hardware ad tapig d Saves up to a hour of istallatio time per typical ie ru site Sure protectio d Largest surface cotact area i the idustry d Provides surety of protectio agaist eve the most severe lightig strikes d Waterproof to IEC529, IP68 Compact size d Clip ad lock istallatio ideal for tight cable budles or crowded towers d Exclusive uiversal groudig lug ca be fitted to a oe- or two-hole earthig attachmet poit. Uited States Patet: 6,548,762. Other patets pedig. More Iformatio d See Compact Suregroud orderig iformatio o page 33 d See the istallatio video at www.adrew.com/products/tras_lie/heliax/suregroud.aspx SureGroud Kits Fast Istallatio, Complete Protectio Protect your equipmet from the effects of lightig with SureGroud groudig kits. Meetig both MIL ad IEC stadards, the SureGroud self-securig groud strap elimiates the eed for attachmet tools ad provides protectio agaist lightig strikes i excess of 100 ka. Quality o-braided solid copper costructio prevets moisture retetio ad wickig, while a heavy duty 6 gauge, MIL-STD-188-124B compliat copper groud lead maximizes performace. Istallatio is fast, easy, ad error-free. Groudig kits iclude a solid copper strap riveted to the groudig wire, tower attachmet hardware, ad a two-part tape weatherproofig system. Groudig kit versios are available with a ti platig for compatability with alumium cables. Uited States Patet: 5,850,056. TIP! The Compact SureGroud Kit with itegrated weatherproofig is the choice for the speediest istallatio, best fit i tight locatios, ad log-term protectio. Easy Istallatio Positio Compact SureGroud groudig kit Clip ad lock to seal Completed 31
Lightig Protectio Groudig Kits Stadard Groudig Kits Easy Istallatio for System Protectio Stadard groudig kits are traditioal solutios for lightig protectio ad are also well suited for elliptical waveguide istallatios. Oe groudig kit is recommeded at the tower top, tower bottom, at 200 ft (60 m) itervals, ad at the etrace to the equipmet shelter. Stadard groudig kits (204989 ad 241088 series) require few steps to istall ad iclude easy-to-follow istructios. Proper tesioig is esured by a expasio sectio that provides visual idicatio that the strap is secured. Series 204989 ad 241088 kits iclude a solid copper strap riveted to the groudig wire, coilig tool for proper tighteig, uiversal groudig lug, tower attachmet hardware, ad a two-part tape weatherproofig system. Field-attachable, crimp-o groudig lugs require a crimpig tool (ot icluded). Uiversal Groudig Lugs This groudig lug provides you with the optio of a oe-hole cofiguratio or two-hole cofiguratio. Just break away the bottom portio of the lug ad this will give you your oe-hole lug. This uiversal lug will fit commo buss bar cofiguratios with two-hole spacigs of 0.750, 0.815, or 1.0 i. Desiged to crimp o 6 gauge or 16 mm 2 groudig wire. Icluded o all groudig kits ad available separately. Part Number Descriptio 245529-10 Uiversal groudig lug, kit of 10 207136-3 Groudig lug hardware kit For two bolt groudig For oe bolt groudig Sap off pre-scored lug for oe hole optio Uiversal Groudig Kit Part Number Descriptio UG12158-15B4 1/2" 1-5/8" EW180 EW63 60" field attached lug Crimpig Tool for SureGroud ad Stadard Groudig The crimpig tool is used to attach crimp-o lugs for stadard ad SureGroud series groudig kits. Not required for kits with factory attached lugs. Part Number Descriptio 207270 Crimpig tool, quatity 1 Coector Groudig Kit for Moutig Rail Part Number Descriptio CGT12 Coector groudig kit fits all F4 ad L4 (except OePiece ) series coectors CGT58 Coector groudig kit fits all L4.5 ad L5 stadard coectors CGT78 Coector groudig kit fits all L5, V5, A5, OePiece, ad Positive Stop series coectors CGT114 Coector groudig kit fits all L6 series coectors CGT158 Coector groudig kit fits all L7 ad V7 series coectors CGT214 Coector groudig kit fits all L12 series coectors 40 mm x 22 mm x 17 mm 32
Lightig Protectio Groudig Kits Compact SureGroud 24 i 36 i 60 i Size/Type 600 mm 1 meter 1.5 meters factory attached lug field attached lug 1/2" LDF4 black CSGL4-06B2 CSGL4-10B2 CSGL4-15B4 1/2" LDF4 gray CSGL4-06S2 CSGL4-10S2 CSGL4-15S4 7/8" black CSGL5-06B2 CSGL5-10B2 CSGL5-15B4 7/8" gray CSGL5-06S2 CSGL5-10S2 CSGL5-15S4 1-1/4" black CSGL6-06B2 CSGL6-10B2 CSGL6-15B4 1-1/4" gray CSGL6-06S2 CSGL6-10S2 CSGL6-15S4 1-5/8" black CSGL7-06B2 CSGL7-10B2 CSGL7-15B4 1-5/8" gray CSGL7-06S2 CSGL7-10S2 CSGL7-15S4 SureGroud Size/Type 600 mm 1 meter 1.5 meters factory attached lug field attached lug 1/2" LDF4 black SGL4-06B2 SGL4-10B2 SGL4-15B4 1/2" LDF4 gray SGL4-06S2 5/8" black SGL45-06B2 SGL45-10B2 SGL45-15B4 7/8" black SGL5-06B2 SGL5-10B2 SGL5-15B4 7/8" gray SGL5-06S2 7/8" alumium cable SGL5-06B2-T SGL5-15B4-T 1-1/4" black SGL6-06B2 SGL6-10B2 SGL6-15B4 1-1/4" gray SGL6-06S2 1-5/8" black SGL7-06B2 SGL7-10B2 SGL7-15B4 1-5/8" gray SGL7-06S2 1-5/8" alumium cable SGL7-06B2-T SGL7-15B4-T 2-1/4" SGL12-06B2 SGL12-10B2 SGL12-15B4 Stadard Groudig Kit Size/Type 24" i 36" i 60" i factory attached lug field attached lug 1/4" ad 3/8", EW240, EW380 223158-2 223158-3 223158-4 1/2", EW180, EW220 241088-1 241088-6 241545 5/8" ad 7/8", EW85, EW90, EW127A, EW132 241088-2 241088-7 220497 1-1/4", EW64, EW77 241088-3 241088-8 241088-60 1-5/8", EW52, EW63 241088-4 241088-9 220498 EW43 204989-10 241088-64 204989-28 2-1/4" ad 3", EW28, EW37 241088-5 241088-10 223700-724 4", EW17, EW20 204989-6 Uiversal Groudig Kit Size/Type 60" field attached lug 1/4" 5/8" (Cita, HELIAX ) GK-SUNV Uiversal Coector Groudig Kit Part Number Descriptio 244495 Uiversal coector groudig kit 33
Lightig Protectio Groudig Bars Groud Buss Bars Adrew offers a complete rage of groudig buss bar sizes ad hole patter cofiguratios to accommodate just about ay applicatio. Each groudig bar is made from 1/4 i solid copper bar stock ad is available with optioal ti platig. Kits come complete with isulators, stailess steel brackets, adapters, ad hardware for moutig to a wall or tower. 2" Groud Buss Bar Kits Part Number Descriptio 2" x 10" Groud Buss Bar Kits Bare Copper UGBKIT-0210 Uiversal groud buss bar kit, 1/4" x 2" x 10" (6.4 mm x 50.8 mm x 254.0 mm) with uiversal buss bar hardware kit Tied Copper UGBKIT-0210-T Uiversal tied groud buss bar kit, 1/4" x 2" x 10" (6.4 mm x 50.8 mm x 254.0 mm) with uiversal buss bar hardware kit 2" (50.8 mm) 1/2" (12.7 mm) 7/16" (11.1 mm) 7/16" x 5/8" (11.1 mm x 15.9 mm) 3/4" (19.1 mm) 10" (254 mm) 2" x 12" Groud Buss Bar Kits Bare Copper UGBKIT-0212 Uiversal groud buss bar kit, 1/4" x 2" x 12" (6.4 mm x 50.8 mm x 304.8 mm) with uiversal buss bar hardware kit Tied Copper UGBKIT-0212-T Uiversal tied groud buss bar kit, 1/4" x 2" x 12" (6.4 mm x 50.8 mm x 304.8 mm) with uiversal buss bar hardware kit 7/16" (11.1 mm) 2" x 14" Groud Buss Bar Kits Bare Copper UGBKIT-0214 Uiversal groud buss bar kit, 1/4" x 2" x 14" (6.4 mm x 50.8 mm x 355.6 mm) with uiversal buss bar hardware kit Tied Copper UGBKIT-0214-T Uiversal tied groud buss bar kit, 1/4" x 2" x 14" (6.4 mm x 50.8 mm x 355.6 mm) with uiversal buss bar hardware kit 2" (50.8 mm) 1/2" (12.7 mm) 2-1/2" Groud Buss Bar Kits Part Number Descriptio 2-1/2" x 12-1/2" Groud Buss Bar Kits Bare Copper UGBKIT-2 Uiversal groud buss bar kit, 1/4" x 2-1/2 x 12-1/2 (6.4 mm x63.5 mm x 317.5 mm) with uiversal buss bar hardware kit Tied Copper UGBKIT-2T Uiversal tied groud buss bar kit, 1/4" x 2-1/2" x 12-1/2" (6.4 mm x 63.5 mm x 317.5 mm) with uiversal buss bar hardware kit 2-1/2" (63.5 mm) 13/16" (20.6 mm) 1" (25.4 mm) 7/16" (11.1 mm) 1" (25.4 mm) 12-1/2" (317.5 mm) 7/16" x 5/8" (11.1 x 15.9 mm) 3/4" (19.1 mm) 7/16" (11.1 mm) 1-3/8" (34.9 mm) 14" (355.6 mm) 1-1/4" (31.8 mm) 2" (50.8 mm) 1/2" (12.7 mm) 12" (304.8 mm) ( UGBKIT 34
Lightig Protectio Groudig Bars 2-1/2" x 19-1/2" Groud Buss Bar Kits Bare Copper UGBKIT Uiversal groud buss bar kit, 1/4" x 2-1/2" x 19-1/2" (6.4 mm x 63.5 mm x 495.3 mm) with uiversal buss bar hardware kit Tied Copper UGBKIT-T Uiversal tied groud buss bar kit, 1/4" x 2-1/2" x 19-1/2" (6.4 mm x 63.5 mm x 495.3 mm) with uiversal buss bar hardware kit 4" x 14" Groud Buss Bar Kits Bare Copper GBKIT-0414 Uiversal groud buss bar kit, 1/4" x 4" x 14" (6.3 mm x 101.6 mm x 355.6 mm) with uiversal buss bar hardware kit. Tied Copper UGBKIT-0414-T Uiversal tied groud buss bar kit, 1/4" x 4" x 14" (6.3 mm x 101.6 mm x 355.6 mm) with uiversal buss bar hardware kit. 13/16" (20.6 mm) 2-1/2" (63.5 mm) 1" (25.4 mm) 7/16" (11.1 mm) 1-3/8" (34.9 mm) 19-1/2" (495.3 mm) 1-1/4" (31.8 mm) 4" (101.6 mm) (11.1 mm) (11.1 mm x 15.9 mm) (6.4 mm) 4" Groud Buss Bar Kits Part Number Descriptio 4" x 12" Groud Buss Bar Kits Bare Copper UGBKIT-0412 Uiversal groud buss bar kit, 1/4" x 4" x 12" (6.3 mm x 101.6 mm x 304.8 mm) with uiversal buss bar hardware kit Tied Copper UGBKIT-0412-T Uiversal tied groud buss bar kit, 1/4" x 4" x 12" (6.3 mm x 101.6 mm x 304.8 mm) with uiversal buss bar hardware kit 1-1/2" (38.1 mm) (12.7 mm) (355.6 mm) (12.7 mm) 7/16" (11.1 mm) 7/16" x 5/8" (11.1 mm x 15.9 mm) 4" (101.6 mm) 1/2" (12.7 mm) 3/4" (19 mm) 12" (304.8 mm) ( UGBKIT-0412 ( UGBKIT-0210 35
Lightig Protectio Groudig Bars 4" x 20" Groud Buss Bar Kits Bare Copper UGBKIT-0420 Uiversal groud buss bar kit, 1/4" x 4" x 20" (6.3 mm x 101.6 mm x 508.0 mm) with uiversal buss bar hardware kit. Tied Copper UGBKIT-0420-T Uiversal tied groud buss bar kit, 1/4" x 4" x 20" (6.3 mm x 101.6 mm x 508.0 mm) with uiversal buss bar hardware kit. 4" (101.6 mm) 1-3/4" (44.5 mm) 7/16" (11.1 mm) 7/16" x 5/8" (11.1 mm x 15.9 mm) 3/4" (19 mm) 20" (508 mm) 4" x 24" Groud Buss Bar Kits Bare Copper UGBKIT-0424 Uiversal groud buss bar kit, 1/4" x 4" x 24" (6.3 mm x 101.6 mm x 609.6 mm) with uiversal buss bar hardware kit. Tied Copper UGBKIT-0424-T Uiversal tied groud buss bar kit, 1/4" x 4" x 24" (6.3 mm x 101.6 mm x 609.6 mm) with uiversal buss bar hardware kit. Uiversal Arrestor Groud Bar Assembly This pre-puched solid copper groud bar assembly simplifies moutig ad groudig of surge arrestors iside the buildig. Istead of relyig o idividual wires or field-fabricated trapeze setups, the Adrew uiversal arrestor groud bar assembly provides a uiform moutig ad groudig poit for surge arrestors ad groudig leads. The 1/8 i assembly uses three horizotal members that ca be orieted flat or upright ad adjusted vertically as eeded to accommodate various surge arrestor types. Also icluded is a moutig kit that icludes ceilig brackets, isulators, threaded rod, ad hardware. d Compatible with stadard etry port sizes d Height-adjustable bars d Solid copper costructio d Accepts bulkhead or bolt grouded surge arrestors d Accommodates oe- ad two-hole groudig lugs d Elimiates eed for iteral buss bar Part Number Descriptio UGBA-DIN-36 Three 6-positio groud bars puched for oversized 7-16 DIN mout arrestors (APTL ad APT series) or bolt-grouded arrestors UGBA-36 Three 6-positio groud bars puched for most 7-16 DIN, Type N or bolt-grouded arrestors (Adrew APG ad APM series arrestors) UGBA-DIN-34 Three 4-positio groud bars puched for oversized 7-16 DIN mout arrestors (APTL ad APT series) or bolt-grouded arrestors UGBA-34 Three 4-positio groud bars puched for most 7-16 DIN, Type N, or bolt-grouded arrestors (Adrew APG ad APM series arrestors) 7/16" (11.1 mm) 7/16" x 5/8" (11.1 mm x 15.9 mm) 4" (101.6 mm) 1-3/4" (44.5 mm) 3/4" (19 mm) 20" (508 mm) 36
Lightig Protectio Surge Arrestors Arrestor Plus Lightig Surge Arrestors Add the fial measure of protectio to your equipmet from lightig curret travelig dow the trasmissio lie with Arrestor Plus surge arrestors. All desigs are completely weatherproof ad feature low retur, isertio loss, ad low itermodulatio. Our wide rage of surge arrestor types ad cofiguratios support most applicatios. T-Series Dual Bad dc Pass Dual Bad Replaceable Gas Tube Itegrated Bias Tee dc Block T-Series Surge Arrestors Arrestor Plus T-series surge arrestors give egieers more flexibility whe cofigurig lightig protectio systems. This slim profile arrestor fits easily iside equipmet eclosures, is bidirectioal, ad offers true multistrike protectio. The arrestor plus bulkhead mout T-series features uiversal Type N ad 7-16 DIN iterfaces. The dc passig versio allows curret to travel to the top of the tower. Replaceable Gas Tube Surge Arrestors Offerig broadbad performace from 0 2200 MHz ad excellet electrical characteristics, Arrestor Plus replaceable gas tube surge arrestors are easy to istall, are bidirectioal, ad feature dc pass capability through the ceter coductor to the active tower top electroics. The uit s removable cap makes periodic maiteace fast ad easy. 45 2200 MHz, 90 V APG-BDFDF-090 APG-BDFDM-090 APG-BNFNF-090 APG-BNFNM-090 45 2200 MHz, 350 V APG-BDFDF-350 APG-BDFDM-350 APG-BNFNF-350 APG-BNFNM-350 824 960 MHz ad 1710 2170 MHz 824 960 MHz ad 1710 2170 MHz dc Passig 380 520 MHz 675 825 MHz 2000 2800 MHz APT-DFDF-DB APT-DFDM-DB APT-BDFDF-DB APC-BDFDM-DB APT-BDFDM-DB APT-NFNF-DB APT-NFNM-DB APT-BNFNF-DB APT-BNFNM-DB APTDC-BDFDF-DB APTDC-BDFDM-DB APTDC-BNFNM-DB APC-BDFDM-450 APC-BDFDM-700 APB-BNFNF-2400 37
Lightig Protectio Surge Arrestors Itegrated Surge Arrestor/Coector The Arrestor Plus itegrated, T-series lightig surge arrestor is a oepiece surge arrestor/heliax coector. It uiquely combies the reliability of quarterwave shortig stub techology with the prove performace of HELIAX coectors to deliver premium lightig protectio i a sigle compoet. 824 960 MHz ad 1710 2170 MHz APTA5DC-BDF-DB APTA7DC-BDF-DB dc Block The dc block is desiged to block dc sigals from passig through the ceter coductor of a coaxial trasmissio lie. The dc block is a bidirectioal RF device. Either RF port may be coected to the equipmet side or the atea side of the trasmissio lie iterface to provide equivalet protectio. 824 960 MHz ad 1710 2170 MHz ADCB-DFDM-DB Bias Tee Adrew bias tees are desiged to protect equipmet from damagig trasiets iduced by lightig strikes. This product allows the ijectio of dc curret to the ceter coductor of the feeder lie, allowig curret to travel to the top of the tower. Bias tees are uidirectioal devices. Ports are clearly marked to show moutig directio with either Atea or Radio. 824 960 MHz ad 1710 2170 MHz ABT-DFDM-ADBH ABT-DFDM-DB ABT-DMDF-ADBH ABT-DMDF-DB ABT-NFNM-DB ABT-NMNF-DB Surge Arrestor Accessories Part Number Descriptio GASTUBE-090 90 volt gas tube replacemet, kit of 10 GASTUBE-350 350 volt gas tube replacemet, kit of 10 243951 90 degree moutig/groudig bracket, Type N 243950 90 degree moutig/groudig bracket, 7 16 DIN 244847 Itegrated surge arrestor/coector 90 degree moutig/groudig bracket, 7 16 DIN DF-CAPKIT Plated port sealig cap, 7 16 DIN (Fits oto DIN female coector), IP 66 ad 68 38
APPENDIXES
Appedix 1 Quarterwave Stub Surge Arrestors Quarterwave Stub Surge Arrestors Cosideratios ad Selectio Quarterwave Stub (QWS) Surge Arrestor Techology A uderstadig of the key cocepts of quarterwave stub techology ad its relatioship to lightig trasiets ca be of great beefit to trasmissio lie system desigers ad operators. With this uderstadig, system desigers ad operators ca more fully utilize lightig protectio systems that use QWS techology as well as uderstad the critical role multistrike ability plays i lightig protectio systems. Arrestor Plus T-series surge arrestors from Adrew Corporatio employ QWS techology, a uique desig that allows microwave sigals to pass uatteuated while shutig the lower frequecies associated with lightig-iduced trasiets to groud. This prove QWS techology is utilized i APT Arrestor Plus Surge Arrestors. To uderstad QWS techology, oe eeds to uderstad lightig. The lightig trasiet is characterized by a curret waveform with a 8-microsecod rise time (time to reach 90% of the peak value) ad a 20-microsecod decay time (time to decay to 50% of the peak value). Peak currets ca reach excessive values, but 50% of all strikes will reach values of oly 18 ka. It is importat to remember that this is oly a laboratory characterizatio of the lightig trasiet, but it facilitates stadardized testig techiques for the idustry. Figure 1 depicts a actual laboratory-geerated 8/20 µsec waveform that was used to evaluate Adrew surge arrestors. For more detailed iformatio regardig laboratory geerated surge waveforms, see IEC 60-2, ANSI-IEEE Std 4-1978, ad ANSI C62.1-1984. The substatial eergy associated with lightig trasiets has frequecy compoets ear dc with compoets of decreasig value of eergy extedig through 160 khz. The effectiveess of surge arrestors is characterized by the throughput eergy ad the ability to withstad multiple surges. These characteristics are readily measurable i a laboratory equipped with the appropriate test equipmet. Throughput eergy is a measure of the amout of eergy passed through the output of the device whe the iput of the device is subjected to a lightig trasiet waveform. The throughput eergy ca be calculated from the residual voltage waveform usig the relatioship: Figure 2 shows the residual output voltage preset whe a APT Series Surge Arrestor was subjected to a actual 8/20 µsec waveform with a peak curret of 20 ka. I this case, the residual voltage was recorded across a 50 ohm load. The resultig throughput eergy was 72 microjoules. The objective of the surge arrestor is to miimize the throughput eergy to a maageable level. Most microwave trasmitters ad receivers used i today s wireless systems are capable of withstadig throughput eergy levels of 10 millijoules or less. Residual output voltage of a APT quarterwave stub surge arrestor whe subjected to a 8 x 20 µsec curret surge with peak curret of 20,000 amperes. Laboratory geerated 8 x 20 µsec lightig surge curret waveform. Peak curret: 21 kiloamperes Time (microsecods) Figure 2 Time (microsecods) Figure 1 The ability to withstad multiple strikes is also a importat measure of surge arrestor merit. Multistrike ability is measured by subjectig the QWS surge arrestors to repeated surges ad observig if the arrestors cotiue to properly fuctio or show 40
Appedix 1 Quarterwave Stub Surge Arrestors sigs of degradatio. No evidece of failure or degradatio was observed after subjectig the Adrew Arrestor Plus surge arrestors to over 100 strikes at 50 ka peak curret usig a 8/20 µsec waveform. This level of reliability is essetial i protectig today s telecommuicatios systems from the potetial of damagig lightig trasiets. Arrestor Plus QWS surge arrestors are carefully desiged ad tested to provide a low impedace path to groud for ay lightig iduced trasiet eergy preset o the ceter coductor of the trasmissio lie. These surge arrestors are desiged to withstad multiple strikes of the most severe surges. The uique attributes of QWS surge arrestors are made possible by careful desig ad selectio of the geometry ad cross-sectioal area of the coductors that make up the shortig stub. QWS desigs result i extremely low throughput eergy devices with true multistrike ability. Whe selectig a surge arrestor, the RF performace must be cosidered. Characteristics that describe RF performace are operatig badwidth, VSWR (retur loss), isertio loss, maximum average power, ad passive itermodulatio distortio. The operatig badwidth of quarterwave shorted stubs is limited, but Adrew Arrestor Plus QWS surge arrestors are desiged to accommodate the operatig badwidth requiremets of today s wireless telecommuicatios systems. Quarterwave shorted stubs ca be desiged to accommodate up to 20% badwidth. The badwidth characteristics of the surge arrestors is similar to that of a badpass filter: RF sigals at the ceter of the bad pass uatteuated, while out-of-bad sigals (such as lightig trasiets) are diverted harmlessly to groud. Figure 3 shows the measured widebad S11 (retur loss) of a QWS surge arrestor. Note that i the bad of iterest, the S11 levels are typically -30 db. S11 vs Frequecy for a QWS surge arrestor It is key to ote that dc sigals caot be passed through the device. Whe dc passig is required, as is ofte the case for tower top active electroics, the it is strogly recommeded to use Adrew APG gas tube series surge arrestors. For more iformatio o APG gas tube series arrestors, see Appedix 2. The lowest ceter frequecy of operatio is limited to approximately 400 MHz, while the highest ceter frequecy is limited by the cutoff frequecy of the coaxial cable beig used. Figure 4 shows a cross-sectioal view of a QWS surge arrestor. The lower operatig frequecy is limited due to the physical size of the shortig stub. Whe the shortig stub reaches too log of a physical legth, the stub appears as a iductive load, resultig i excessive residual voltages. Quarterwave shorted stubs ca be desiged to accommodate systems operatig as high as 12 GHz. Figure 4 I the operatig badwidth of the Arrestor Plus QWS surge arrestors, the RF performace characteristics are optimal. At the operatig frequecies of the Arrestor Plus, the isertio loss is less tha 0.1 db, o more tha addig a coector to the trasmissio lie path. Figure 5 shows the measured S21 (isertio loss) performace of a APM type QWS surge arrestor. Note that i the bad of iterest, the S21 levels are better tha -0.05 db. The maximum average operatig power of the Arrestor Plus QWS surge arrestor is limited by the coector iterface. The suggested maximum average operatig power for Type N coectors is 600 watts at 900 MHz. The suggested maximum average operatig power for 7-16 DIN coectors is 3000 watts at 900 MHz. Exceedig these values ca result i excessive temperature rise ad permaet damage to the device. Itermodulatio distortio (IMD) is a major cocer i today s PCS, cellular, ESMR, ad other wireless systems. IMD is caused by oliear effects withi a device. For coectors, these oliear effects ca be caused by poor cotact betwee iteral surfaces, platig with ferrous materials, such as ickel, or by oxide build up betwee cotact surfaces. Frequecy (MHz) Figure 3 41
Appedix 1 Quarterwave Stub Surge Arrestors S21 vs Frequecy for a QWS surge arrestor Frequecy (MHz) Figure 5 Arrestor Plus surge arrestors are desiged with high pressure cotacts, premium platigs, ad are compesated to offer the best possible IMD performace. The fuctioality of Arrestor Plus QWS surge arrestors ca be readily evaluated by usig ordiary RF field test equipmet. If there is o degradatio of the VSWR or isertio loss of the arrestor, the the surge arrestor is reassurigly fuctioig as a trasiet lightig protectio device. VSWR ad isertio loss measuremets ca be made by usig vector or scalar etwork aalyzers as well as a variety of other readily available field test equipmet. No other maiteace is required. As obvious as it may seem, surge arrestors should ever be istalled or tested whe a storm is occurrig or approachig. System requiremets ofte dictate outdoor istallatio of surge arrestors. Arrestor Plus surge arrestors are ideal for these applicatios ad desiged to withstad the harshest eviromets ad are extesively tested to meet idustry stadard specificatios for waterproofig, vibratio, thermal cyclig, mechaical shock, salt spray, fugus, ad moisture resistace. QWS surge arrestors are excellet choices for wireless base statio applicatios where superior RF performace is required to esure call quality ad whe protectio agaist multiple lightig strikes is of primary importace. 42
Appedix 2 Gas Tube Surge Arrestors Gas Tube Surge Arrestors Cosideratios ad Selectio Gas Tube Surge Arrestor Techology To simplify selectig the appropriate gas tube surge arrestor for your system plots, maximum average power vs. VSWR have bee compiled. Figures 1 ad 2 show plots of maximum average power vs. VSWR for 90 ad 350 volt gas tubes. Each graph shows differet values of commoly used dc bias voltages. These graphs were established from extesive laboratory testig ad iclude the appropriate safety factors to esure proper gas tube selectio. Usig these graphs for selectig a gas tube will optimize the level of protectio required for your system. Gas tube elemets are offered i various spark-over voltages. Adrew Corporatio simplifies the selectio process by limitig the choice to two optios, 90 volt for GPS applicatios ad 350 volt for may other wireless applicatios requirig a dc bias. Plots of maximum average power vs. VSWR have bee compiled for the 90 ad 350 volt gas tubes from extesive laboratory testig ad have built-i safety factors to esure proper selectio. See figures 3 ad 4. Each graph shows several differet values of commoly used dc bias voltages. Usig these graphs for selectig a gas tube will optimize the level of protectio required for your system. Whe workig i today s eviromet of diplexed sigals, overlaid etworks, tower mouted amplifiers, ad multiple carriers, it is ecessary to verify that a system s maximum average power does ot exceed that ratig for the gas tube. The followig example illustrates the process of usig the voltage deratig curves that follow. Usig the Maximum Average Power Deratig Curves GSM Radio Operatig Coditios: 1. Number of carriers = 2 2. Power of each carrier (dbm) = +42 dbm carriers at the output of a hybrid combier (+45 dbm at combier iput) 3. VSWR = 1.25:1 4. dc Bias = 15 V 5. Nomial Impedace = 50 Ω 1. Calculate the peak istataeous voltage of a sigle +42 dbm carrier for a 50 ohm based system Average Power (average power per carrier i dbm/10) per Carrier (watts)= 10 1000 V rms per carrier (volts): = average power per carrier (watts) Impedace (ohms) V rms per carrier (volts) = 28.284 V peak per carrier (volts):= 2 V rms per carrier (volts) V peak per carrier (volts) = 40 Therefore, the peak istataeous voltage of a sigle +42 dbm carrier is 40 volts. 2. Calculate the peak istataeous voltage of a two, +42 dbm carrier, 50 ohm based system Peak istataeous voltage (volts):= V peak per carrier (volts) umber of carriers (N) Peak istataeous voltage (volts) = 80 Therefore, the peak istataeous voltage of a two +42 dbm carriers is 80 volts. 3. Calculate the peak istataeous power of two, +42 dbm carrier, 50 ohm based system Peak istataeous power (watts):= (Peak istataeous voltage (volts)) 2 Impedace (ohms) Peak istataeous power (watts) = 128 Peak istataeous power (dbm):= 10 log Peak istataeous power (watts) 0.001 Peak istataeous power (dbm) = 51.072 Therefore, the peak istataeous voltage of two, +42 dbm carriers is 128 watts (+51 dbm). 4. The gas tube selectio curves are specified as Maximum Average Power vs. VSWR. Therefore, it is required to calculate a estimate of the average (RMS) power from the peak istataeous power. A reasoable calculatio of this estimate is show below: Peak istataeous voltage (volts) = 80 RMS equivalet (volts): = RMS equivalet (volts) = 56.569 RMS equal power (watts):= RMS equal power (watts) = 64 Peak istataeous voltage (volts) 2 (RMS equivalet (volts))2 Impedace (ohms) Therefore, to utilize the gas tube selectio curves, a approximate value of 64 watts average power would provide a reasoable estimate. Note that for this calculatio, the dc bias voltage was ot specified ad the VSWR was ot specified. The gas tube selectio curves provide a deratig for both the VSWR ad dc bias voltage. 5. Apply calculated iformatio to the deratig curves. 43
Appedix 2 Gas Tube Surge Arrestors Deratig of maximum average power due to VSWR ad applied dc bias for APG Arrestor Plus surge arrestors with 90 volt gas tubes Deratig of maximum average power due to VSWR ad applied dc bias for APG Arrestor Plus surge arrestors with 90 volt gas tubes Vdc bias 15 V 375 W 3.25 W Vdc bias 15 V 1.25 VSWR Figure 1 VSWR Figure 2 Steps 1. Apply system parameters to 90 V curves. 2. Estimate 15 V dc bias lie 3. Fid average power level at itersectio with 1.25 VSWR 4. Average power = 3.25 W 5. 3.25 W is much less tha 64 W therefore 90 V gas tube is ot chose for this applicatio. 6. Move o to 350 V curve. Gas Tube Deratig Curves Deratig of maximum average power due to VSWR ad applied dc bias for APG Arrestor Plus surge arrestors with 90 volt gas tubes Steps 1. Locate maximum average power for system with VSWR = 1.25 ad Vdc = 15 V as before. 2. Maximum average power (est.) = 375 W (+55.74 dbm) 3. Estimated average power (from calculatio) = 64 W (+48.06 dbm) 4. Resultig safety margi is 7.68 db. 5. 350 V gas tube is chose due to acceptable safety margi. The APTDC lie of dc passig surge arrestors should be used for those cases where the itersectio of VSWR ad Maximum Average Power lie above the 0 volt dc offset curve. Deratig of maximum average power due to VSWR ad applied dc bias for APG Arrestor Plus surge arrestors with 350 volt gas tubes 90 Volt Figure 3 350 Volt Figure 4 44
Appedix 2 Gas Tube Surge Arrestors Adrew Arrestor Plus gas tube surge arrestors allow field replacemet of gas tube elemets. Gas tubes ca be replaced by simply removig the ut ad replacig the elemet. A gas tube elemet may ot always show outward sigs of failure or degradatio, therefore, routie maiteace ad ispectio is suggested. If the umber of storms i a area is high, gas tube elemets should be replaced more frequetly. Gas tube degradatio is depedet o the umber as well as the itesity of the lightig strikes. As obvious as it may seem, gas tube elemets should ever be replaced whe a storm is occurrig or approachig. Whe selectig a surge arrestor, the RF performace must be cosidered. Characteristics that describe RF performace are operatig badwidth, VSWR (retur loss), isertio loss, ad maximum average power. Arrestor Plus gas tube arrestors offer the widest badwidth available of ay gas tube surge arrestors o the market. Ulike quarterwave stub arrestors, Adrew APG gas tube arrestors ca be used for applicatios uder 400 MHz. A sigle uit ca be used for broadbad applicatios over the full frequecy rage of 0 2000 MHz. Figure 5 shows the measured widebad S11 retur loss plot of a gas tube surge arrestor. Note that i the commoly used 800 960 MHz ad 1700 2000 MHz bads, the S11 levels are typically better tha -30 db. S11 vs Frequecy for a APG gas tube surge arrestor S21 vs Frequecy for a APG gas tube surge arrestor Ulike QWS arrestors, a gas tube arrestor ca pass dc curret alog the ceter coductor, as is ofte required for today s wireless commuicatio systems icorporatig tower top active electroics. VSWR ad isertio loss measuremet of APG gas tube surge arrestors ca be made by usig vector or scalar etwork aalyzers as well as a variety of other readily available types of field test equipmet. The arrestors are dc passig broadbad devices ad ca therefore be used with time domai reflect meters or fault locatio equipmet. System requiremets ofte dictate that surge arrestors will be istalled outdoors. The Arrestor Plus APG series surge arrestors from Adrew are ideal for these applicatios ad are desiged to withstad the harshest eviromet. They are extesively tested to meet idustry stadard specificatios for waterproofig, vibratio, thermal cyclig, mechaical shock, salt spray, fugus, ad moisture resistace. Adrew Arrestor Plus gas tube surge arrestors are a excellet choice for broadbad frequecy applicatios or whe a dc bias is required for providig power to tower top devices. Please visit our website at www.adrew.com for more iformatio. Frequecy (MHz) Figure 5 Over the operatig frequecies of the Arrestor Plus surge arrestor, the isertio loss is less tha 0.1 db, o more tha addig a coector to the trasmissio lie path. Figure 6 shows the measured S21 (isertio loss) performace for a typical APG family arrestor. Note that i the commoly used 800 960 MHz ad 1700 2000 MHz bads, the S21 levels are typically -0.05 db ad -0.12 db, respectively. 45
Appedix 3 dc Passig T-Series Surge Arrestors dc Passig T-Series Surge Arrestors Adrew Arrestor Plus dc passig surge arrestors (US patet pedig) are true broadbad RF devices that are capable of allowig a dc bias to pass alog the ceter while shortig the lower frequecies associated with lightig iduced trasiets to the outer coductor ad to earth groud. By removig the gas tube from the RF path, they allow dc voltage to pass ad greatly ehace power hadlig capability. Arrestor Plus dc passig widebad surge arrestors are the same geeral shape ad size as a typical quarterwave surge arrestors. The arrestor is comprised of two coaxial coector iterfaces joied by a ceter coductor passig through a coaxial arrestor body. A shortig stub coects to the ceter coductor o a axis perpedicular to the ceter coductor through a port i the arrestor body. A gas discharge tube sits directly o top of the RF shortig stub, uder costat pressure applied by the gas tube sprig clip. The shortig stub, RF shortig stub, gas tube, ad gas tube sprig clip are sealed iside of the shortig stub sleeve ad arrestor body by compressig a o-rig betwee the screw-i gas cap ad the shortig stub sleeve. The fuctio of the various elemets i the dc passig T-series surge arrestor described above are best uderstood if modeled as a simple electroic circuit as show i figure 1, below. Figure 1 Electroic circuit diagram of dc-passig widebad surge arrestor The two coaxial coector iterfaces, ports P1 ad P2, provide couplig to coaxial cables that ru betwee the output of the radio equipmet ad the surge arrestor ad the surge arrestor ad the atea. This cable is idicated as havig a omial impedace (Zo) of 50 Ω. The ceter coductor sectios that are betwee the coaxial coector iterfaces ad the shortig stub are modeled as trasmissio lies TL1 ad TL2. The shortig stub is modeled as a iductor (L1) that coects to the ceter coductor betwee TL1 ad TL2. The outer surface of the RF shortig stub is coated with a dielectric material to create a series capacitace (C1) betwee the ed of the helical shortig stub ad the shortig stub sleeve, which is a groud (G1). A gas discharge tube with capacitace (C2) sits i parallel with capacitor C1 ad groud (G2). The iductace, L1, of the helical shortig stub ad the effective capacitace of parallel capacitors C1 ad C2 tue the surge arrestor givig it a broadbad frequecy respose. Uder ormal operatig coditios, the RF sigal will pass straight from P1 to P2 sice the iductor, L1, appears as a ope circuit. Whe a dc bias voltage is applied at either P1 or P2, it will also pass straight through the device. The dc bias voltage is preveted from shortig to either earth grouds, G1 or G2, by capacitors, C1 ad C2, because these capacitors appear as ope circuits to low curret dc bias voltages typically applied to power tower mouted amplifiers or active ateas. The gas i the gas discharge tube will ioize uder lightig strikes or other high voltage coditios allowig the trasiet to go from the ceter coductor to the outer coductor or groud (G2). For purposes of effective groudig, the surge arrestor ca either be mouted to groud through a bulkhead iterface or by moutig the surge arrestor to a copper groudig buss bar via threaded moutig hardware that is provided with the surge arrestor or ordered separately. 46
Appedix 4 Lightig Strike Probability Lightig Strikes Statistics ad Defiitios Statistics o the probability of a lightig strike to towers of various heights i various locatios o Earth Isokerauic Flash Groud Strikes per Year: Locatio Level Latitude Desity Flash Desity 50-foot tower 100-foot tower 200-foot tower Chicago, IL 41 42 33.60 9.95 0.041 0.153 0.591 Arligto, TX 48 33 46.10 9.85 0.040 0.151 0.585 Atlata, GA 50 34 50.00 11.30 0.046 0.173 0.671 Tampa, FL 100 28 200.00 35.00 0.143 0.537 2.081 York, UK 9 53 1.62 0.67 0.003 0.010 0.039 Taiwa 20 23 8.00 1.27 0.005 0.019 0.075 Hog Kog 30 23 18.00 2.85 0.012 0.043 0.170 Sigapore 140 2 392.00 39.30 0.160 0.604 2.340 Rio de Jaeiro 60 23 72.00 11.40 0.046 0.175 0.679 Defiitios ad Commets Isokerauic Level: The isokerauic level is a measure of the umber of thuderstorm days per year. A thuderstorm day is defied as a day o which thuder is heard. For example, the city of Chicago averages 41 thuderstorm days per year. The isokerauic level is expressed as: Ty = Isokerauic Levels Total Flash Desity: The total flash desity is a measure of the umber of flashes per year per square kilometer. For example, the city of Chicago averages 33 flashes per year per square kilometer. Total flash desity icludes itracloud flashes, itercloud flashes, ad cloud-to-groud flashes. Total flash desity ca be expressed as DT. The expressio for total flash desity is a empirically determied value based o may years of observatio ad ca be approximated as follows: P fractio DT 0.02 x Ty2 P fractio Groud Flash Desity: The groud flash desity is a measure of the umber of flashes that reach the groud (as opposed to itercloud ad itracloud type flashes). Flashes that reach the groud are the oes that are threateig to us. For example, the city of Chicago averages 9.9 groud flashes per year per square kilometer. The expressio for groud flash desity is a empirically determied value based o may years of observatio ad ca be expressed as follows: DGroud Flash = P fractio x DT is the fractio of total flashes that reach the groud. The value is related to the latitude as expressed i the followig equatio: P fractio = 0.1 x [1 + ( latitude ) ] 2 30 Area of Attractio of a Structure: A structure has a defied attractio area that is strogly depedet o the height ad less depedet o its width ad legth. For a structure of height H, legth L, ad width W, the area of attractio (sometimes referred to as area of collectio ) ca be estimated by usig the followig equatio. All uits are i meters. Note that if the structure has a small legth or small width as compared to the height, such as a commuicatios tower or pole, the the equatio is domiated by the height. AreaC = L W = 4.4 H (L + W) + π (2.2 H) 2 Average Number of Strikes per Year to a Tower: The average umber of strikes per year for a arbitrary tower of height H, legth L ad width W, ca be estimated by multiplyig the Area of Attractio, Area C, by the Groud Flash Desity, D Groud Flash. Sice the Area of Attractio, is expressed i square meters ad the Groud Flash Desity is expressed i square kilometers, a factor of 10-6 must be icluded. Sψ Area c x D Groud Flash x H 2 x 10-6 Strikes per Year, 50 foot tower: As a example, a 50-foot tower i the Chicago area will average 0.040 strikes per year (or this ca be iterpreted as 1 strike every 24.6 years). The calculatios were based o a 50-foot (15.24 meters) height, 3.5-meter width, 3.5- meter legth, latitude of 42 degrees, ad a isokerauic level of 41 thuderstorm days per year. Strikes per Year, 100 foot tower: As a example, a 100-foot tower i the Chicago area will average 0.153 strikes per year (or this ca be iterpreted as 1 strike every 6.5 years). The calculatios were based o a 100-foot (30.48 meters) height, 3.5-meter width, 3.5-meter legth, latitude of 42 degrees, ad a isokerauic level of 41 thuderstorm days per year. Strikes per Year, 200 foot tower: As a example, a 200-foot tower i the Chicago area will average 0.591 strikes per year (or this ca be iterpreted as 1 strike every 1.7 years). The calculatios were based o a 200-foot (60.96 meters) height, 3.5-meter width, 3.5-meter legth, latitude of 42 degrees, ad a isokerauic level of 41 thuderstorm days per year. It is importat to remember that these are statistical calculatios based o may years of observatio. Whe lightig strikes withi eve a few kilometers of the tower, damagig trasiets ca be coupled ad carried o ay trasmissio lies, data lies, ad power lies i the viciity ad cause damagig effects withi the area of the tower. Refereces 1 IEC 1312-1, Protectio Agaist Lightig Electromagetic Impulse 2 IEEE C62.41-1991, IEEE Recommeded Practice o Surge Voltages i Low-Voltage ac Power Circuits 3 MIL-STD-188-124A, Military Stadard for Groudig, Bodig ad Shieldig 4 MIL-HDBK-419A, Military Hadbook for the Theory of Groudig, Bodig ad Shieldig of Commuicatios Electroics. Volume 1 (Basic Theory), Volume 2 (Applicatios) 5 MIL-STD-1757A, Lightig Qualificatio Test Techiques for Aerospace Vehicles ad Hardware 6 Natioal Electric Code 1993, Article 280 7 IEC 1024-1, Protectio of Structures Agaist Lightig. 8 BS 6651, 1992 Code of Practice for Protectio of Structures Agaist Lightig 9 Aleksa, J. ad Stockma, C., A Flash of Beauty or a Force for Destructio?, South Africa Wireless Commuicatios, Aug 1997 10 Fisher, F.A. ad Plumer, J.A., Lightig Protectio of Aircraft, Lightig Techologies, 1990 47
Appedix 5 Additioal Documets The table below lists Adrew publicatios for the products metioed i this guide. They are available at www.adrew.com. Adrew Accessory Products Iformatio Cable Hoistig ad Attachmet Bulleti Number Support/Hoistig Grips for HELIAX Cables 237409 Click-O Hagers 237397 Stadard Hager Kits 37378 Type 31766A Hager Kits 17783 Hager Kits 37321 Hoistig Grip ad Cable Support Hagers SP30-45 Compact Agle Adapters 10140 Agle Adaptors (types 31768A, 243684, 243684-M) 237363 Hager Spacig Guidelies SapStak Adapter for 3/8" Cotrol Cable Cable Tie 40417 TP-101619.1-EN TP-100940-EN TP-101085-EN Hoistig Grip for 1/4" Data Cables 7540680 SapStak Istallatio 237637 Tools HELIAX Coector Tool Kit 237274 Wrech Kits 10234 Securig Coaxial Cable i a Moopole 10236 Adrew Istallatio Tools PA-100414.2-EN Weatherproofig 3M Cold Shrik Weatherproofig Kits 237272 3M Cold Shrik Weatherproofig Kits 237426 Applicatio Details for 3M Cold Shrik Kits SP50030 Coector/Splice Weatherproofig Kit 237133 WeatherShield Eclosures PA-100428.4-EN WeatherShield Istallatio, Mai Feeder Atea 750141 WeatherShield Istallatio, Atea 237914 Techical Specificatios for WeatherShield TP-100257.2-EN Cable Etry Cabiet Feed-Thru Plates for 1/2" through 1-5/8" 237362 Types 204673 ad 48940 Wall/Roof Feed Thru Plates 237060 Sigle Etrace Wall/Roof Feed-Thru Kits 37007 ArrestorPort II Etry/Groud System 237516 Lightig Protectio Uiversal Groudig Bar 237440 Uiversal Groud Bar Assembly 237513 SureGroud Istallatio 237549 Stadard Groudig Kits 237549 Coector Groudig Kit 237701 Compact SureGroud Kit Compact SureGroud Testig Performace PA-101089-EN SP50365-A Compact SureGroud Istallatio Istructio 7513851 48
Appedix 6 Hager Spacig Guidelies HELIAX Coaxial Cable Recommeded maximum hager spacigs are tabulated below for various wid speed ad ice coditios. The recommedatios are based o guidelies stated i EIA Stadard RS-222 ad ew wid tuel ad vibratio tests. They supersede those i previous Adrew catalogs. Please refer to Adrew publicatio umber TP-101619-EN available at www.adrew.com for the most curret recommedatios. These spacig recommedatios assume that all hagers are properly istalled ad tighteed. Istallatios i Typical Climates Use the 125 mph (200 km/h), 1/2 i ice coditios, highlighted i red. Severe or Mild Climates Use the wid speed ad ice coditios that most closely approximate the expected worst case coditios for the local climate. Stadard Hager Maximum Hager Spacig Cable Size Cable Type Hager Part Number Recommeded Maximum Hager Spacig, feet (meters) Wid Speed 85 mph (137 km/h) 100 mph (160 km/h) Radial Ice No Ice 1/2" (13 mm) 1" (25 mm) No Ice 1/2" (13 mm) 1" (25 mm) 1/2" LDF4-50A 43211A 5 (1.5) 4 (1.2) 3 (0.9) 5 (1.5) 4 (1.2) 3 (0.9) 1/2" LDF4-75A 43211A 5 (1.5) 4 (1.2) 3 (0.9) 5 (1.5) 4 (1.2) 3 (0.9) 1/2" HL4RP-50 43211A 5 (1.5) 4 (1.2) 3 (0.9) 5 (1.5) 4 (1.2) 3 (0.9) 1/2" HJ4-50 43211A 5 (1.5) 4 (1.2) 3 (0.9) 5 (1.5) 4 (1.2) 3 (0.9) 1/2" HLT4-50 43211A 5 (1.5) 4 (1.2) 3 (0.9) 5 (1.5) 3 (0.9) 2 (0.6) 1/2" HT4-50 43211A 5 (1.5) 4 (1.2) 3 (0.9) 5 (1.5) 4 (1.2) 3 (0.9) 1/2" HST4-50 43211A 5 (1.5) 3 (0.9) 3 (0.9) 4 (1.2) 3 (0.9) 2 (0.6) 1/2" HS4RP-50 43211A 5 (1.5) 3 (0.9) 3 (0.9) 4 (1.2) 3 (0.9) 2 (0.6) 1/2" FSJ4-50B 43211A 5 (1.5) 3 (0.9) 3 (0.9) 4 (1.2) 3 (0.9) 2 (0.6) 1/2" FSJ4-75A 43211A 5 (1.5) 3 (0.9) 3 (0.9) 4 (1.2) 3 (0.9) 2 (0.6) 5/8" LDF4.5-50 42396A-9 5 (1.5) 5 (1.5) 4 (1.2) 5 (1.5) 5 (1.5) 4 (1.2) 5/8" HJ4.5-50 42396A-9 5 (1.5) 5 (1.5) 4 (1.2) 5 (1.5) 5 (1.5) 4 (1.2) 7/8" AVA5-50 42396A-5 5 (1.5) 5 (1.5) 4 (1.2) 5 (1.5) 5 (1.5) 4 (1.2) 7/8" LDF5-50A 42396A-5 5 (1.5) 5 (1.5) 4 (1.2) 5 (1.5) 5 (1.5) 4 (1.2) 7/8" AL5-50 42396A-5 5 (1.5) 5 (1.5) 4 (1.2) 5 (1.5) 5 (1.5) 4 (1.2) 7/8" HJ5-50 42396A-5 5 (1.5) 5 (1.5) 4 (1.2) 5 (1.5) 5 (1.5) 4 (1.2) 7/8" HJ5-75 42396A-5 5 (1.5) 5 (1.5) 4 (1.2) 5 (1.5) 5 (1.5) 4 (1.2) 7/8" HT5-50 42396A-5 5 (1.5) 5 (1.5) 4 (1.2) 5 (1.5) 5 (1.5) 4 (1.2) 1-1/4" LDF6-50 42396A-1 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 3 (0.9) 1-5/8" AVA7-50 42396A-2 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 3 (0.9) 3 (0.9) 1-5/8" LDF7-50A 42396A-2 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 3 (0.9) 3 (0.9) 1-5/8" AL7-50 42396A-2 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 3 (0.9) 3 (0.9) 1-5/8" HJ7-50A 42396A-2 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 3 (0.9) 3 (0.9) Defiitios ad Assumptios 1. Per EIA-222 Stadard: Coefficiet of drag for coaxial cable is 1.2 (cylidrical members). Ice forms completely aroud member (360 degrees). Combied wid ad ice loadig is reduced by 25% to reflect lower probability of wid ad ice occurrig simultaeously. 2. Wid speeds are maximum, which icludes gust factors ad exposure factors. Note: Stadard tower cofiguratio spacig is 3 to 4 ft. 49
Appedix 6 Hager Spacig Guidelies Stadard Hager Maximum Hager Spacig Cable Size Cable Part Number Hager Part Number Recommeded Maximum Hager Spacig, feet (meters) Wid Speed 85 mph (137 km/h) 100 mph (160 km/h) Radial Ice No Ice 1/2" (13 mm) 1" (25 mm) No Ice 1/2" (13 mm) 1" (25 mm) 2-1/4" LDF12-50A 42395A-4 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 3 (0.9) 3 (0.9) 2-1/4" HJ12-50 42396A-4 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 3 (0.9) 3 (0.9) 3" HJ8-50B 31766A-11 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 4" HJ11-50B 31766A-10 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5" HJ9HP-50 33598-5 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5" HJ9-50 33598-5 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) Cable Size Cable Part Number Hager Part Number Recommeded Maximum Hager Spacig, feet (meters) Wid Speed 125 mph (200 km/h) 150 mph (240 km/h) Radial Ice No Ice 1/2" (13 mm) 1" (25 mm) No Ice 1/2" (13 mm) 1" (25 mm) 1/2" LDF4-50A 43211A 4 (1.2) 3 (0.9) 2 (0.6) 3 (0.9) 2 (0.6) 1 (0.3) 1/2" LDF4-75A 43211A 4 (1.2) 3 (0.9) 2 (0.6) 3 (0.9) 2 (0.6) 1 (0.3) 1/2" HL4RP-50 43211A 4 (1.2) 3 (0.9) 2 (0.6) 3 (0.9) 2 (0.6) 1 (0.3) 1/2" HJ4-50 43211A 4 (1.2) 3 (0.9) 2 (0.6) 3 (0.9) 2 (0.6) 1 (0.3) 1/2" HLT4-50 43211A 4 (1.2) 3 (0.9) 2 (0.6) 3 (0.9) 2 (0.6) 1 (0.3) 1/2" HT4-50 43211A 4 (1.2) 3 (0.9) 2 (0.6) 3 (0.9) 2 (0.6) 1 (0.3) 1/2" HST4-50 43211A 3 (0.9) 3 (0.9) 2 (0.6) 3 (0.9) 2 (0.6) 1 (0.3) 1/2" HS4RP-50 43211A 3 (0.9) 3 (0.9) 2 (0.6) 3 (0.9) 2 (0.6) 1 (0.3) 1/2" FSJ4-50B 43211A 3 (0.9) 3 (0.9) 2 (0.6) 3 (0.9) 2 (0.6) 1 (0.3) 1/2" FSJ4-75A 43211A 3 (0.9) 3 (0.9) 2 (0.6) 3 (0.9) 2 (0.6) 1 (0.3) 5/8" LDF4.5-50 42396A-9 5 (1.5) 4 (1.2) 3 (0.9) 4 (1.2) 3 (0.9) 3 (0.9) 5/8" HJ4.5-50 42396A-9 5 (1.5) 4 (1.2) 3 (0.9) 4 (1.2) 3 (0.9) 3 (0.9) 7/8" AVA5-50 42396A-5 5 (1.5) 4 (1.2) 3 (0.9) 4 (1.2) 3 (0.9) 2 (0.6) 7/8" LDF5-50A 42396A-5 5 (1.5) 4 (1.2) 3 (0.9) 4 (1.2) 3 (0.9) 2 (0.6) 7/8" AL5-50 42396A-5 5 (1.5) 4 (1.2) 3 (0.9) 4 (1.2) 3 (0.9) 2 (0.6) 7/8" HJ5-50 42396A-5 5 (1.5) 4 (1.2) 3 (0.9) 4 (1.2) 3 (0.9) 2 (0.6) 7/8" HJ5-75 42396A-5 5 (1.5) 4 (1.2) 3 (0.9) 4 (1.2) 3 (0.9) 2 (0.6) 7/8" HT5-50 42396A-5 5 (1.5) 4 (1.2) 3 (0.9) 4 (1.2) 3 (0.9) 2 (0.6) 1-1/4" LDF6-50 42396A-1 4 (1.2) 4 (1.2) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 1-5/8" AVA7-50 42396A-2 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 2 (0.6) 1-5/8" LDF7-50A 42396A-2 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 2 (0.6) 1-5/8" AL7-50 42396A-2 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 2 (0.6) 1-5/8" HJ7-50A 42396A-2 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 2 (0.6) 2-1/4" LDF12-50 42395A-4 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 2-1/4" HJ12-50 42396A-4 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3" HJ8-50B 31766A-11 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 4" HJ11-50B 31766A-10 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5" HJ9HP-50 33598-5 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5" HJ9-50 33598-5 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) Note: Stadard tower cofiguratio spacig is 3 to 4 ft. 50
Appedix 6 Hager Spacig Guidelies Sap-I Hager Recommeded Maximum Hager Spacig Cable Size Cable Part Number Hager Part Number Recommeded Maximum Hager Spacig, feet (meters) Wid Speed 85 mph (137 km/h) 100 mph (160 km/h) Radial Ice No Ice 1/2" (13 mm) 1" (25 mm) No Ice 1/2" (13 mm) 1" (25 mm) 1/2" LDF4-50A SSH-12 4 (1.2) 4 (1.2) 3 (0.9) 4 (1.2) 3 (0.9) 2 (0.6) 1/2" LDF4-75A SSH-12 4 (1.2) 4 (1.2) 3 (0.9) 4 (1.2) 3 (0.9) 2 (0.6) 1/2" HL4RP-50 SSH-12 4 (1.2) 4 (1.2) 3 (0.9) 4 (1.2) 3 (0.9) 2 (0.6) 1/2" HJ4-50 SSH-12 4 (1.2) 4 (1.2) 3 (0.9) 4 (1.2) 3 (0.9) 2 (0.6) 1/2" HLT4-50 SSH-12 4 (1.2) 4 (1.2) 3 (0.9) 4 (1.2) 3 (0.9) 2 (0.6) 1/2" HT4-50 SSH-12 4 (1.2) 4 (1.2) 3 (0.9) 4 (1.2) 3 (0.9) 2 (0.6) 1/2" HST4-50 SSH-12 4 (1.2) 4 (1.2) 3 (0.9) 4 (1.2) 3 (0.9) 2 (0.6) 1/2" HS4RP-50 SSH-12 4 (1.2) 4 (1.2) 3 (0.9) 4 (1.2) 3 (0.9) 2 (0.6) 1/2" FSJ4-50B SSH-12 4 (1.2) 3 (0.9) 2 (0.6) 3 (0.9) 2 (0.6) 2 (0.6) 1/2" FSJ4-75A SSH-12 4 (1.2) 3 (0.9) 2 (0.6) 3 (0.9) 2 (0.6) 2 (0.6) 5/8" LDF4.5-50 206706A-6 4 (1.2) 4 (1.2) 3 (0.9) 4 (1.2) 3 (0.9) 2 (0.6) 5/8" HJ4.5-50 206706A-6 4 (1.2) 4 (1.2) 3 (0.9) 4 (1.2) 3 (0.9) 2 (0.6) 7/8" AVA5-50 SSH-78 4 (1.2) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 2 (0.6) 7/8" LDF5-50A SSH-78 4 (1.2) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 2 (0.6) 7/8" AL5-50 SSH-78 4 (1.2) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 2 (0.6) 7/8" HJ5-50 SSH-78 4 (1.2) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 2 (0.6) 7/8" HJ5-75 SSH-78 4 (1.2) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 2 (0.6) 7/8" HT5-50 SSH-78 4 (1.2) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 2 (0.6) 1-1/4" LDF6-50 SSH-114 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 2 (0.6) 1-5/8" AVA7-50 SSH-158 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 2 (0.6) 1-5/8" LDF7-50A SSH-158 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 2 (0.6) 1-5/8" AL7-50 SSH-158 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 2 (0.6) 1-5/8" HJ7-50A SSH-158 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 2 (0.6) 2-1/4" LDF12-50 206706A-6 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 2 (0.6) 2 (0.6) 2-1/4" HJ12-50 206706A-6 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 2 (0.6) 2 (0.6) Defiitios ad Assumptios 1. Per EIA-222 Stadard: Coefficiet of drag for coaxial cable is 1.2 (cylidrical members). Ice forms completely aroud member (360 degrees). Combied wid ad ice loadig is reduced by 25% to reflect lower probability of wid ad ice occurrig simultaeously. 2. Wid speeds are maximum, which icludes gust factors ad exposure factors. Note: Stadard tower cofiguratio spacig is 3 to 4 ft. 51
Appedix 6 Hager Spacig Guidelies Sap-I Hager Recommeded Maximum Hager Spacig Cable Size Cable Part Number Hager Part Number Recommeded Maximum Hager Spacig, feet (meters) Wid Speed 125 mph (200 km/h) 150 mph (240 km/h) Radial Ice No Ice 1/2" (13 mm) 1" (25 mm) No Ice 1/2" (13 mm) 1" (25 mm) 1/2" LDF4-50A SSH-12 3 (0.9) 3 (0.9) 2 (0.6) 3 (0.9) 2 (0.6) 1 (0.3) 1/2" LDF4-75A SSH-12 3 (0.9) 3 (0.9) 2 (0.6) 3 (0.9) 2 (0.6) 1 (0.3) 1/2" HL4RP-50 SSH-12 3 (0.9) 3 (0.9) 2 (0.6) 3 (0.9) 2 (0.6) 1 (0.3) 1/2" HJ4-50 SSH-12 3 (0.9) 3 (0.9) 2 (0.6) 3 (0.9) 2 (0.6) 1 (0.3) 1/2" HLT4-50 SSH-12 3 (0.9) 3 (0.9) 2 (0.6) 3 (0.9) 2 (0.6) 1 (0.3) 1/2" HT4-50 SSH-12 3 (0.9) 3 (0.9) 2 (0.6) 3 (0.9) 2 (0.6) 1 (0.3) 1/2" HST4-50 SSH-12 3 (0.9) 3 (0.9) 2 (0.6) 3 (0.9) 2 (0.6) 1 (0.3) 1/2" HS4RP-50 SSH-12 3 (0.9) 3 (0.9) 2 (0.6) 3 (0.9) 2 (0.6) 1 (0.3) 1/2" FSJ4-50B SSH-12 3 (0.9) 2 (0.6) 1 (0.3) 2 (0.6) 2 (0.6) 1 (0.3) 1/2" FSJ4-75A SSH-12 3 (0.9) 2 (0.6) 1 (0.3) 2 (0.6) 2 (0.6) 1 (0.3) 5/8" LDF4.5-50 206706A-6 3 (0.9) 3 (0.9) 2 (0.6) 2 (0.6) 2 (0.6) 1 (0.3) 5/8" HJ4.5-50 206706A-6 3 (0.9) 3 (0.9) 2 (0.6) 2 (0.6) 2 (0.6) 1 (0.3) 7/8" AVA5-50 SSH-78 3 (0.9) 3 (0.9) 2 (0.6) 2 (0.6) 1 (0.3) 1 (0.3) 7/8" LDF5-50A SSH-78 3 (0.9) 3 (0.9) 2 (0.6) 2 (0.6) 1 (0.3) 1 (0.3) 7/8" AL5-50 SSH-78 3 (0.9) 3 (0.9) 2 (0.6) 2 (0.6) 1 (0.3) 1 (0.3) 7/8" HJ5-50 SSH-78 3 (0.9) 3 (0.9) 2 (0.6) 2 (0.6) 1 (0.3) 1 (0.3) 7/8" HJ5-75 SSH-78 3 (0.9) 3 (0.9) 2 (0.6) 2 (0.6) 1 (0.3) 1 (0.3) 7/8" HT5-50 SSH-78 3 (0.9) 3 (0.9) 2 (0.6) 2 (0.6) 1 (0.3) 1 (0.3) 1-1/4" LDF6-50 SSH-114 3 (0.9) 3 (0.9) 2 (0.6) 2 (0.6) 1 (0.3) 1 (0.3) 1-5/8" AVA7-50 SSH-158 3 (0.9) 3 (0.9) 2 (0.6) 2 (0.6) 1 (0.3) 1 (0.3) 1-5/8" LDF7-50A SSH-158 3 (0.9) 3 (0.9) 2 (0.6) 2 (0.6) 1 (0.3) 1 (0.3) 1-5/8" AL7-50 SSH-158 3 (0.9) 3 (0.9) 2 (0.6) 2 (0.6) 1 (0.3) 1 (0.3) 1-5/8" HJ7-50A SSH-158 3 (0.9) 3 (0.9) 2 (0.6) 2 (0.6) 1 (0.3) 1 (0.3) 2-1/4" LDF12-50 206706A-6 3 (0.9) 3 (0.9) 2 (0.6) 2 (0.6) 1 (0.3) 1 (0.3) 2-1/4" HJ12-50 206706A-6 2 (0.6) 2 (0.6) 1 (0.3) 2 (0.6) 1 (0.3) 1 (0.3) Defiitios ad Assumptios 1. Per EIA-222 Stadard: Coefficiet of drag for coaxial cable is 1.2 (cylidrical members). Ice forms completely aroud member (360 degrees). Combied wid ad ice loadig is reduced by 25% to reflect lower probability of wid ad ice occurrig simultaeously. 2. Wid speeds are maximum, which icludes gust factors ad exposure factors. Note: Stadard tower cofiguratio spacig is 3 to 4 ft. 52
Appedix 6 Hager Spacig Guidelies Click-O Hager Recommeded Maximum Hager Spacig Cable Size Cable Part Number Hager Part Number Recommeded Maximum Hager Spacig, feet (meters) Wid Speed 85 mph (137 km/h) 100 mph (160 km/h) Radial Ice No Ice 1/2" (13 mm) 1" (25 mm) No Ice 1/2" (13 mm) 1" (25 mm) 1/2" LDF4-50A L4CLICK, 1 Stack 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 1/2" LDF4-50A L4CLICK, 2 Stack 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 1/2" LDF4-50A L4CLICK, 3 Stack 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) Note: These same hager spacig recommedatios apply for the other followig 1/2 i cable types: LDF4-75A, HL4RP-50, HLT4-50, HS4RP-50, HST4-50, HT4-50, HJ4-50 5/8" LDF4.5-50A L45CLICK, 1 Stack 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 5/8" LDF4.5-50A L45CLICK, 2 Stack 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 5/8" LDF4.5-50A L45CLICK, 3 Stack 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) Note: These same hager spacig recommedatios apply for the other followig 5/8 i cable types: HJ4.5-50 7/8" LDF5-50A L5CLICK, 1 Stack 4 (1.2) 4 (1.2) 4 (1.2) 3 (0.9) 3 (0.9) 3 (0.9) 7/8" LDF5-50A L5CLICK, 2 Stack 4 (1.2) 4 (1.2) 4 (1.2) 3 (0.9) 3 (0.9) 3 (0.9) 7/8" LDF5-50A L5CLICK, 3 Stack 4 (1.2) 4 (1.2) 4 (1.2) 3 (0.9) 3 (0.9) 3 (0.9) Note: These same hager spacig recommedatios apply for the other followig 7/8 i cable types: AVA5-50, VXL5-50, AL5-50, HJ5-50, HJ5-75, HT5-5 1-1/4" LDF6-50 L6CLICK, 1 Stack 4 (1.2) 4 (1.2) 4 (1.2) 3 (0.9) 3 (0.9) 3 (0.9) 1-1/4" LDF6-50 L6CLICK, 2 Stack 4 (1.2) 4 (1.2) 4 (1.2) 3 (0.9) 3 (0.9) 3 (0.9) 1-1/4" LDF6-50 L6CLICK, 3 Stack 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 1-5/8" LDF7-50A L7CLICK, 1 Stack 4 (1.2) 4 (1.2) 4 (1.2) 3 (0.9) 3 (0.9) 3 (0.9) 1-5/8" LDF7-50A L7CLICK, 2 Stack 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 1-5/8" LDF7-50A L7CLICK, 3 Stack 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) Note: These same hager spacig recommedatios apply for the other followig 1 5/8 i cable types: HJ7-50A, AVA7-50, AL7-50 * These hager spacigs have bee specified based o usig the Click-O Hagers with Adrew specified hardware kits. (Note: Stadard tower cofiguratio spacig is 3 to 4 ft) Defiitios ad Assumptios 1. Per EIA-222 Stadard: Coefficiet of drag for coaxial cable is 1.2 (cylidrical members). Ice forms completely aroud member (360 degrees). Combied wid ad ice loadig is reduced by 25% to reflect lower probability of wid ad ice occurrig simultaeously. 2. Wid speeds are maximum, which icludes gust factors ad exposure factors. 53
Appedix 6 Hager Spacig Guidelies Click-O Hager Recommeded Maximum Hager Spacig Cable Size Cable Part Number Hager Part Number Recommeded Maximum Hager Spacig, feet (meters) Wid Speed 125 mph (200 km/h) 150 mph (240 km/h) Radial Ice No Ice 1/2" (13 mm) 1" (25 mm) No Ice 1/2" (13 mm) 1" (25 mm) 1/2" LDF4-50A L4CLICK, 1 Stack 3 (0.9) 3 (0.9) 3 (0.9) 2 (0.6) 2 (0.6) 2 (0.6) 1/2" LDF4-50A L4CLICK, 2 Stack 3 (0.9) 3 (0.9) 3 (0.9) 2 (0.6) 2 (0.6) 2 (0.6) 1/2" LDF4-50A L4CLICK, 3 Stack 3 (0.9) 3 (0.9) 3 (0.9) 2 (0.6) 2 (0.6) 2 (0.6 Note: These hager spacig recommedatios are also applicable for these 1/2 i cable types: LDF4-75A, HL4RP-50, HLT4-50, HS4RP-50, HST4-50, HT4-50, HJ4-50 5/8" LDF4.5-50A L45CLICK, 1 Stack 3 (0.9) 3 (0.9) 3 (0.9) 2 (0.6) 2 (0.6) 2 (0.6) 5/8" LDF4.5-50A L45CLICK, 2 Stack 3 (0.9) 3 (0.9) 3 (0.9) 2 (0.6) 2 (0.6) 2 (0.6) 5/8" LDF4.5-50A L45CLICK, 3 Stack 2 (0.6) 2 (0.6) 2 (0.6) 2 (0.6) 2 (0.6) 2 (0.6) Note: These hager spacig recommedatios are also applicable for this 5/8 i cable type: HJ4.5-50 7/8" LDF5-50A L5CLICK, 1 Stack 3 (0.9) 3 (0.9) 3 (0.9) 2 (0.6) 2 (0.6) 2 (0.6) 7/8" LDF5-50A L5CLICK, 2 Stack 3 (0.9) 3 (0.9) 3 (0.9) 2 (0.6) 2 (0.6) 2 (0.6) 7/8" LDF5-50A L5CLICK, 3 Stack 2 (0.6) 2 (0.6) 2 (0.6) 2 (0.6) 2 (0.6) 2 (0.6) Note: These hager spacig recommedatios are also applicable for these 7/8 i cable types: AVA5-50, VXL5-50, AL5-50, HJ5-50, HJ5-75, HT5-5 1-1/4" LDF6-50 L6CLICK, 1 Stack 3 (0.9) 3 (0.9) 3 (0.9) 2 (0.6) 2 (0.6) 2 (0.6) 1-1/4" LDF6-50 L6CLICK, 2 Stack 3 (0.9) 3 (0.9) 3 (0.9) 2 (0.6) 2 (0.6) 2 (0.6) 1-1/4" LDF6-50 L6CLICK, 3 Stack 2 (0.6) 2 (0.6) 2 (0.6) 2 (0.6) 2 (0.6) 2 (0.6) 1-5/8" LDF7-50A L7CLICK, 1 Stack 3 (0.9) 3 (0.9) 3 (0.9) 2 (0.6) 2 (0.6) 2 (0.6) 1-5/8" LDF7-50A L7CLICK, 2 Stack 2 (0.6) 2 (0.6) 2 (0.6) 2 (0.6) 2 (0.6) 2 (0.6) 1-5/8" LDF7 50A L7CLICK, 3 Stack 2 (0.6) 2 (0.6) 2 (0.6) 2 (0.6) 2 (0.6) 2 (0.6) Note: These hager spacig recommedatios are also applicable for these 1 5/8 i cable types: HJ7-50A, AVA7-50, AL7-50 (Note: Stadard tower cofiguratio spacig is 3 to 4 ft) Mii Click-O Hager Recommeded Maximum Hager Spacig Cable Size Cable Part Number Hager Part Number Wid Speed 125 mph (200 km/h) Radial Ice 6 mm 8mm CNT-240, CNT-300, FSJ1 series 68MCLICK, 1 Stack No Ice 1.5 (0.61) 1/2" (13 mm) 1.5 (0.61) 1" (25 mm) 1.5 (0.61) 6 mm 8mm CNT-240, CNT-300, FSJ1 series 68MCLICK, 2 Stack 1.5 (0.61) 1.5 (0.61) 1.5 (0.61) 6 mm 8mm 9 mm 12 mm CNT-240, CNT-300, FSJ1 series CNT-400, LDF1, FSJ2, LDF2, EFX2 series 68MCLICK, 3 Stack 912MCLICK, 1 Stack 1.5 (0.61) 3.0 (0.90) 1.5 (0.61) 3.0 (0.90) 1.5 (0.61) 3.0 (0.90) 9 mm 12 mm CNT-400, LDF1, FSJ2, LDF2, EFX2 series 912MCLICK, 2 Stack 3.0 (0.90) 3.0 (0.90) 3.0 (0.90) 9 mm 12 mm CNT-400, LDF1, FSJ2, LDF2, EFX2 series 912MCLICK, 3 Stack 2.0 (0.60) 2.0 (0.60) 2.0 (0.60) 13 mm 16 mm CNT-500, CNT-600, FSJ ad LDF4 series 1316MCLICK, 1 Stack 3.0 (0.90) 3.0 (0.90) 3.0 (0.90) 13 mm 16 mm CNT-500, CNT-600, FSJ ad LDF4 series 1316MCLICK, 2 Stack 3.0 (0.90) 3.0 (0.90) 3.0 (0.90) 13 mm 16 mm CNT-500, CNT-600, FSJ ad LDF4 series 1316MCLICK, 3 Stack 2.0 (0.60) 2.0 (0.60) 2.0 (0.60) Defiitios ad Assumptios 1. Per EIA-222 Stadard: Coefficiet of drag for coaxial cable is 1.2 (cylidrical members). Ice forms completely aroud member (360 degrees). Combied wid ad ice loadig is reduced by 25% to reflect lower probability of wid ad ice occurrig simultaeously. 2. Wid speeds are maximum, which icludes gust factors ad exposure factors. Note: Stadard tower cofiguratio spacig is 3 to 4 ft. 54
Appedix 6 Hager Spacig Guidelies HELIAX Elliptical Waveguide Recommeded maximum hager spacigs are tabulated below for various wid speed ad ice coditios. The recommedatios are based o guidelies stated i EIA Stadard RS-222 ad ew wid tuel ad vibratio tests. They supersede those i previous Adrew catalogs. Istallatios i Typical Climates Use the 125 mph (200 km/h), 1/2 i ice coditios, highlighted i red. Severe or Mild Climates Use the wid speed ad ice coditios that most closely approximate the expected worst case coditios for the local climate. Stadard Hager for HELIAX Elliptical Waveguide Recommeded Maximum Hager Spacig Waveguide Type Hager Part Number Recommeded Maximum Hager Spacig, feet (meters) Wid Speed 85 mph (137 km/h) 100 mph (160 km/h) Radial Ice No Ice 1/2" (13 mm) 1" (25 mm) No Ice 1/2" (13 mm) 1" (25 mm) EW17 31766A-9 6.0 (1.80) 6.0 (1.80) 6.0 (1.80) 6.0 (1.80) 6.0 (1.80) 6.0 (1.80) EW20 31766A-10 6.0 (1.80) 6.0 (1.80) 6.0 (1.80) 6.0 (1.80) 6.0 (1.80) 6.0 (1.80) EW28 31766A-11 6.0 (1.80) 6.0 (1.80) 6.0 (1.80) 6.0 (1.80) 6.0 (1.80) 5.5 (1.68) EW37 42396A-4 6.0 (1.80) 6.0 (1.80) 5.5 (1.68) 5.5 (1.68) 5.5 (1.68) 5.0 (1.50) EW43 42396A-16 6.0 (1.80) 6.0 (1.80) 5.5 (1.68) 5.0 (1.50) 5.0 (1.50) 4.5 (1.37) EW52 42396A-8 5.5 (1.68) 5.0 (1.50) 4.5 (1.37) 4.5 (1.37) 4.5 (1.37) 4.0 (1.20) EW63 42396A-7 5.0 (1.50) 4.5 (1.37) 4.0 (1.20) 4.0 (1.20) 4.0 (1.20) 3.5 (1.07) EW64 42396A-1 5.0 (1.50) 6.0 (1.80) 4.0 (1.20) 4.5 (1.37) 4.0 (1.20) 3.5 (1.07) EW77 42396A-11 5.0 (1.50) 6.0 (1.80) 4.0 (1.20) 4.5 (1.37) 4.0 (1.20) 3.5 (1.07) EW85 42396A-5 5.5 (1.68) 6.0 (1.80) 4.0 (1.20) 4.5 (1.37) 4.0 (1.20) 3.5 (1.07) EW90 42396A-5 5.5 (1.68) 4.5 (1.37) 4.0 (1.20) 4.5 (1.37) 4.0 (1.20) 3.0 (0.90) EW127A 42396A-9 5.5 (1.68) 4.5 (1.37) 3.5 (1.07) 4.5 (1.37) 4.0 (1.20) 3.0 (0.90) EW132 42396A-9 5.5 (1.68) 4.5 (1.37) 3.5 (1.07) 5.0 (1.20) 4.0 (1.20) 3.0 (0.90) EW180 43211A 6.0 (1.80) 4.5 (1.37) 3.5 (1.07) 5.0 (1.20) 4.0 (1.20) 3.0 (0.90) EW220 43211A 6.0 (1.80) 4.5 (1.37) 3.5 (1.07) 5.0 (1.20) 4.0 (1.20) 3.0 (0.90) EW240 43211A 6.0 (1.80) 4.5 (1.37) 3.5 (1.07) 5.0 (1.20) 4.0 (1.20) 3.0 (0.90) EW380 43211A 6.0 (1.80) 4.5 (1.37) 3.5 (1.07) 5.0 (1.20) 4.0 (1.20) 3.0 (0.90) Note: Stadard tower cofiguratio spacig is 3 to 4 ft. 55
Appedix 6 Hager Spacig Guidelies Stadard Hager for HELIAX Elliptical Waveguide Recommeded Maximum Hager Spacig Waveguide Type Hager Part Number Recommeded Maximum Hager Spacig, feet (meters) Wid Speed 125 mph (200 km/h) 150 mph (240 km/h) Radial Ice No Ice 1/2" (13 mm) 1" (25 mm) No Ice 1/2" (13 mm) 1" (25 mm) EW17 31766A-9 6.0 (1.80) 6.0 (1.80) 5.5 (1.68) 5.0 (1.50) 5.0 (1.50) 4.5 (1.37) EW20 31766A-10 5.5 (1.68) 5.5 (1.68) 5.0 (1.50) 4.5 (1.37) 4.5 (1.37) 4.0 (1.20) EW28 31766A-11 5.0 (1.50) 5.0 (1.50) 4.5 (1.37) 4.0 (1.20) 4.0 (1.20) 3.5 (1.07) EW37 42396A-4 4.5 (1.37) 4.5 (1.37) 4.0 (1.20) 3.5 (1.07) 3.5 (1.07) 3.0 (.090) EW43 42396A-16 4.0 (1.20) 4.0 (1.20) 3.5 (1.07) 3.5 (1.07) 3.5 (1.07) 3.0 (.090) EW52 42396A-8 3.5 (1.07) 3.5 (1.07) 3.0 (.090) 3.0 (.090) 3.0 (.090) 2.5 (0.76) EW63 42396A-7 3.5 (1.07) 3.0 (.090) 2.5 (0.76) 2.5 (0.76) 2.5 (0.76) 2.0 (0.60) EW64 42396A-1 3.5 (1.07) 3.0 (.090) 2.5 (0.76) 3.0 (.090) 2.5 (0.76) 2.0 (0.60) EW77 42396A-11 3.5 (1.07) 3.0 (.090) 2.5 (0.76) 3.0 (.090) 2.5 (0.76) 2.0 (0.60) EW85 42396A-5 3.5 (1.07) 3.0 (.090) 2.5 (0.76) 3.0 (.090) 2.5 (0.76) 2.0 (0.60) EW90 42396A-5 3.5 (1.07) 3.0 (.090) 2.5 (0.76) 3.0 (.090) 2.5 (0.76) 2.0 (0.60) EW127A 42396A-9 3.5 (1.07) 3.0 (.090) 2.5 (0.76) 3.0 (.090) 2.5 (0.76) 2.0 (0.60) EW132 42396A-9 4.0 (1.20) 3.0 (.090) 2.5 (0.76) 3.0 (.090) 2.5 (0.76) 2.0 (0.60) EW180 43211A 4.0 (1.20) 3.0 (.090) 2.5 (0.76) 3.5 (1.07) 2.5 (0.76) 2.0 (0.60) EW220 43211A 4.0 (1.20) 3.0 (.090) 2.5 (0.76) 3.5 (1.07) 2.5 (0.76) 2.0 (0.60) EW240 43211A 4.0 (1.20) 3.0 (.090) 2.5 (0.76) 3.5 (1.07) 2.5 (0.76) 2.0 (0.60) Defiitios ad Assumptios 1. Per EIA-222 Stadard: Coefficiet of drag for coaxial cable is 1.2 (cylidrical members). Ice forms completely aroud member (360 degrees). Combied wid ad ice loadig is reduced by 25% to reflect lower probability of wid ad ice occurrig simultaeously. 2. Wid speeds are maximum, which icludes gust factors ad exposure factors. Note: Stadard tower cofiguratio spacig is 3 to 4 ft. * These hager spacig recommedatios have bee specified usig the click-o hagers with Adrew specified hardware kits. 56
INDEX
114468............................... 28 114469............................... 28 12395-1.............................. 11 1316MCLICK........................... 13 19256B............................... 8 204673-1............................. 22 204673-10............................ 22 204673-12............................ 22 204673-16............................ 22 204673-18............................ 22 204673-2............................. 22 204673-20............................ 22 204673-24............................ 22 204673-2A............................ 22 204673-4............................. 22 204673-6............................. 22 204673-8............................. 22 204673-9............................. 22 204679A-1............................ 22 204679A-13........................... 22 204679A-14........................... 22 204679A-15........................... 22 204679A-16........................... 22 204679A-17........................... 22 204679A-18........................... 22 204679A-19........................... 22 204679A-2............................ 22 204679A-3............................ 22 204679A-4............................ 22 204679A-5............................ 22 204679A-6............................ 22 204679A-7............................ 22 204679A-8............................ 22 204679A-9............................ 22 204989.............................. 32 204989-10............................ 33 204989-28............................ 33 204989-6............................. 33 206706A-5............................. 9 206706A-6............................. 9 207270............................... 32 207270............................... 32 209874............................... 25 209874............................... 25 220497............................... 33 220498............................... 33 221213............................... 21 221213............................... 21 221213-S............................. 21 223158-2............................. 33 223158-3............................. 33 223158-4............................. 33 223700-724........................... 33 224352............................... 28 224354............................... 28 224355............................... 28 224356............................... 28 224360............................... 28 224361............................... 27 224361............................... 27 224361............................... 27 224362............................... 27 224362............................... 27 224362............................... 27 224363............................... 28 224368............................... 28 224373............................... 28 224380............................... 28 224395............................... 28 241088............................... 32 241088-1............................. 33 241088-10............................ 33 241088-2............................. 33 241088-3............................. 33 241088-4............................. 33 241088-5............................. 33 241088-6............................. 33 241088-60............................ 33 241088-64............................ 33 241088-7............................. 33 241088-8............................. 33 241088-9............................. 33 241475-13............................ 20 241545............................... 33 241953............................... 27 243095-1............................. 13 243095-10............................ 13 243095-11............................ 13 243095-12............................ 13 243095-2............................. 13 243095-3............................. 13 243095-4............................. 13 243095-5............................. 13 243095-6............................. 13 243095-7............................. 13 243095-8............................. 13 243095-9............................. 13 24312A............................... 8 243684............................... 12 243684............................... 16 243684-M............................ 16 243684-MH........................... 15 243950............................... 38 243951............................... 38 244350............................... 12 244373............................... 26 244374............................... 26 244374............................... 26 244374............................... 28 244375............................... 26 244375............................... 28 244376............................... 26 244377............................... 26 244377............................... 28 244378............................... 26 244378............................... 27 244379............................... 26 244379............................... 28 244394............................... 27 244459-5............................. 27 244459-6............................. 28 244459-7............................. 28 244494............................... 27 244494............................... 27 244495............................... 32 244847............................... 38 245154............................... 26 245154............................... 27 245171............................... 20 245172............................... 20 245173............................... 20 245174.............................. 20 245175............................... 20 245314-127A.......................... 23 245314-132........................... 23 245314-180........................... 23 245314-220........................... 23 245314-240........................... 23 245314-37............................ 23 245314-43............................ 23 245314-52............................ 23 245314-63............................ 23 245314-64............................ 23 245314-77............................ 23 245314-85............................ 23 245314-90............................ 23 245516............................... 27 245529-10............................ 32 247696............................... 26 247696............................... 26 247696............................... 27 247698............................... 26 247698............................... 28 247763............................... 16 247763-I............................. 16 252026-10KT.......................... 13 252027-10KT.......................... 13 252028-10KT.......................... 13 252029-10KT.......................... 13 26985A............................... 8 29958................................. 8 29961................................. 8 30848-1.............................. 17 30848-2.............................. 17 30848-3.............................. 17 30848-4.............................. 17 30848-5.............................. 17 31031-1............................... 8 31535................................. 8 31670-1.............................. 16 31670-2.............................. 16 31670-3.............................. 16 31670-4.............................. 16 31670-5.............................. 16 31670-6.............................. 16 31766A-10............................ 15 31766A-10............................ 15 31766A-11............................ 15 31766A-11............................ 15 31766A-9............................. 15 31768A-M............................ 16 31769-1.............................. 15 31769-5.............................. 15 31771................................ 15 31771-10............................. 15 31771-4.............................. 15 Idex 58
31771-6.............................. 15 31771-9.............................. 15 34759................................. 8 35849A-10............................ 23 35849A-13............................ 23 35849A-9............................. 23 3CCGRIP............................... 8 40417................................ 17 42334................................ 17 42396A-1............................. 15 42396A-1............................. 15 42396A-11............................ 15 42396A-16............................ 15 42396A-2............................. 15 42396A-4............................. 15 42396A-4............................. 15 42396A-5............................. 15 42396A-5............................. 15 42396A-5............................. 15 42396A-7............................. 15 42396A-8............................. 15 42396A-9............................. 15 42396A-9............................. 15 42396A-9............................. 15 42615-10............................. 21 43094................................. 8 43211A.............................. 15 43211A.............................. 15 43211A.............................. 15 43211A.............................. 15 43211A.............................. 15 48939A-1............................. 22 48939A-10............................ 22 48939A-14............................ 22 48939A-15............................ 22 48939A-16............................ 22 48939A-17............................ 22 48939A-2............................. 22 48939A-3............................. 22 48939A-4............................. 22 48939A-5............................. 22 48939A-6............................. 22 48939A-7............................. 22 48939A-8............................. 22 48939A-9............................. 22 68MCLICK............................. 13 912MCLICK............................ 13 9905-41.............................. 21 9905-71.............................. 21 A5MCPT-78........................... 25 A5MCPT-BK5.......................... 25 ABT-DFDM-ADBH....................... 38 ABT-DFDM-DB.......................... 38 ABT-DMDF-ADBH....................... 38 ABT-DMDF-DB.......................... 38 ABT-NFNM-DB.......................... 38 ABT-NMNF-DB.......................... 38 ADCB-DFDM-DB........................ 38 APB-BNFNF-2400....................... 37 APC-BDFDM-450....................... 37 APC-BDFDM-700....................... 37 APC-BDFDM-DB........................ 37 APG-BDFDF-090........................ 37 APG-BDFDF-350........................ 37 APG-BDFDM-090....................... 37 APG-BDFDM-350....................... 37 APG-BNFNF-090........................ 37 APG-BNFNF-350........................ 37 APG-BNFNM-090....................... 37 APG-BNFNM-350....................... 37 APORT-13-4........................... 22 APTA5DC-BDF-DB....................... 38 APTA7DC-BDF-DB....................... 38 APT-BDFDF-DB......................... 37 APT-BDFDM-DB......................... 37 APT-BNFNF-DB......................... 37 APT-BNFNM-DB......................... 37 APTDC-BDFDF-DB....................... 37 APTDC-BDFDM-DB...................... 37 APTDC-BNFNM-DB...................... 37 APT-DFDF-DB.......................... 37 APT-DFDM-DB.......................... 37 APT-NFNF-DB.......................... 37 APT-NFNM-DB.......................... 37 ARA-22............................... 11 AWE-11412........................... 19 AWE-15812........................... 19 AWE-7812............................ 19 AWE-A12............................. 19 C2SGRIP............................... 8 C2SGRIP-2IK............................ 8 CAP-4................................ 22 CGT114.............................. 32 CGT12............................... 32 CGT158.............................. 32 CGT214.............................. 32 CGT58............................... 32 CGT78............................... 32 CM-TB............................... 21 CM-TBR.............................. 21 CM-TG............................... 21 CM-TR............................... 21 CM-TW............................... 21 CM-TY............................... 21 CPT-158U............................. 24 CPT-158U............................. 24 CPT-158U............................. 28 CPT-78U.............................. 24 CPT-78U.............................. 24 CPT-78U.............................. 27 CPT-BK............................... 24 CPT-BK5.............................. 24 CPT-BK6.............................. 24 CPT-BK7.............................. 24 CPT-BKS1............................. 24 CPT-BKS1............................. 24 CPT-BKS1............................. 24 CPT-BKS1............................. 24 CPT-BKS1............................. 24 CPT-E2L2DIN........................... 24 CPT-E2L2DIN........................... 24 CPT-E2L2DIN........................... 24 CPT-E2L2N............................ 24 CPT-E2L2N............................ 24 CPT-E2L2N............................ 24 CPT-F4............................... 24 CPT-F4............................... 24 CPT-F4............................... 27 CPT-L1............................... 24 CPT-L1............................... 24 CPT-L45RC............................ 24 CPT-L45RC............................ 24 CPT-L4ARC1........................... 24 CPT-L4ARC1........................... 24 CPT-L4ARC1........................... 27 CPTL6................................ 24 CPTL6................................ 24 CPTL6................................ 28 CPTV2-114............................ 24 CPTV2-114............................ 28 CPTV2-158............................ 24 CPTV2-158............................ 28 CPTV2-BK............................. 24 CPTV2-BK............................. 28 CPTV2-BK............................. 28 CS-B................................. 11 CSGL4-06B2........................... 33 CSGL4-06S2........................... 33 CSGL4-10B2........................... 33 CSGL4-10S2........................... 33 CSGL4-15B4........................... 33 CSGL4-15S4........................... 33 CSGL5-06B2........................... 33 CSGL5-06S2........................... 33 CSGL5-10B2........................... 33 CSGL5-10S2........................... 33 CSGL5-15B4........................... 33 CSGL5-15S4........................... 33 CSGL6-06B2........................... 33 CSGL6-06S2........................... 33 CSGL6-10B2........................... 33 CSGL6-10S2........................... 33 CSGL6-15B4........................... 33 CSGL6-15S4........................... 33 CSGL7-06B2........................... 33 CSGL7-06S2........................... 33 CSGL7-10B2........................... 33 CSGL7-10S2........................... 33 CSGL7-15B4........................... 33 CSGL7-15S4........................... 33 DF-CAPKIT............................ 38 E2SGRIP............................... 8 E2SGRIP-2IK............................ 8 EP-CAP5.............................. 22 EWSH-127A............................ 9 EWSH-132............................. 9 EWSH-180............................. 9 EWSH-220............................. 9 EWSH-240............................. 9 EWSH-52.............................. 9 EWSH-63.............................. 9 EWSH-64.............................. 9 EWSH-77.............................. 9 EWSH-90.............................. 9 F1SGRIP............................... 8 F1SGRIP-1IK............................ 8 Idex 59
F2SGRIP............................... 8 F2SGRIP-2IK............................ 8 F4SGRIP............................... 8 F4SGRIP-4IK............................ 8 GASTUBE-090.......................... 38 GBKIT-0414........................... 35 GK-SUNV.............................. 33 GKT-114A............................. 26 GKT-114A............................. 26 GKT-114A............................. 28 GKT-158A............................. 26 GKT-158A............................. 26 GKT-158A............................. 28 GKT-78A.............................. 26 GKT-78A.............................. 26 GKT-78A.............................. 27 GKT-BK512............................ 26 GKT-BK512............................ 26 GKT-BK512............................ 27 GKT-BK512............................ 27 GKT-BK67............................. 26 GKT-BK67............................. 26 GKT-BK67............................. 28 GKT-BK67............................. 28 GKT-BKF4............................. 26 GKT-F4A.............................. 26 GKT-F4A.............................. 26 GKT-L4A.............................. 26 GKT-L4A.............................. 26 GKT-L4A.............................. 27 L12SGRIP.............................. 8 L12SGRIP-12IK.......................... 8 L12SGRIP-12IK.......................... 8 L1SGRIP............................... 8 L1SGRIP-1IK............................ 8 L2SGRIP............................... 8 L2SGRIP-2IK............................ 8 L45CLAMP-( ).......................... 14 L45CLICK............................. 12 L45SGRIP.............................. 8 L45SGRIP-45IK.......................... 8 L45SGRIP-45IK.......................... 8 L4CLAMP-( )........................... 14 L4CLICK.............................. 12 L4SCLICK............................. 12 L4SGRIP............................... 8 L4SGRIP-4IK............................ 8 L4SGRIP-4IK............................ 8 L5CLAMP-( )........................... 14 L5CLICKB............................. 12 L5SCLICKB............................ 12 L5SGRIP............................... 8 L5SGRIP-5IK............................ 8 L5SGRIP-5IK............................ 8 L6CLAMP-( )........................... 14 L6CLICK.............................. 12 L6SCLICK............................. 12 L6SGRIP............................... 8 L6SGRIP-6IK............................ 8 L6SGRIP-6IK............................ 8 L7CLAMP-( )........................... 14 L7CLICK.............................. 12 L7SCLICK............................. 12 L7SGRIP............................... 8 L7SGRIP-7IK............................ 8 L7SGRIP-7IK............................ 8 MCPT-1412............................ 25 MCPT-1412............................ 27 MCPT-1412............................ 27 MCPT-3812............................ 25 MCPT-3812............................ 27 MCPT-78.............................. 25 MCPT-78.............................. 27 MCPT-BK4............................ 25 MCPT-BK5............................ 25 MCPT-L4.............................. 25 MCPT-L4.............................. 27 MCPT-V2.............................. 25 MF39901-10........................... 17 MT-F1598............................. 11 MT-F1599............................. 11 MT-F1600............................. 11 PLUG-114............................. 22 PLUG-12.............................. 22 PLUG-158............................. 22 PLUG-78.............................. 22 R8CLAMP-( )........................... 14 RM-USBG............................. 11 SA-38................................ 12 SCE-114.............................. 22 SCE-12............................... 22 SCE-158.............................. 22 SCE-214.............................. 22 SCE-58............................... 22 SCE-78............................... 22 SG-IT................................. 8 SGL12-06B2........................... 33 SGL12-10B2........................... 33 SGL12-15B4........................... 33 SGL4-06B2............................ 33 SGL4-06S2............................ 33 SGL4-10B2............................ 33 SGL4-15B4............................ 33 SGL45-06B2........................... 33 SGL45-10B2........................... 33 SGL45-15B4........................... 33 SGL5-06B2............................ 33 SGL5-06B2-T.......................... 33 SGL5-06S2............................ 33 SGL5-10B2............................ 33 SGL5-15B4............................ 33 SGL5-15B4-T.......................... 33 SGL6-06B2............................ 33 SGL6-06S2............................ 33 SGL6-10B2............................ 33 SGL6-15B4............................ 33 SGL7-06B2............................ 33 SGL7-06B2-T.......................... 33 SGL7-06S2............................ 33 SGL7-10B2............................ 33 SGL7-15B4............................ 33 SGL7-15B4-T.......................... 33 SHT-4................................ 10 SSH-114............................... 9 SSH-12................................ 9 SSH-158............................... 9 SSH-78................................ 9 SSHA-38............................... 9 SSHAK-3812............................ 9 SS-TB2550............................ 11 SS-TB6080............................ 11 STS3-12.............................. 10 STS3-23.............................. 10 STS3-34.............................. 10 STS3-45.............................. 10 TB-COMP-KIT.......................... 27 UA-3................................. 10 UAAI................................. 10 UG12158-15B4......................... 33 UGBA-34.............................. 36 UGBA-36.............................. 36 UGBA-DIN-34.......................... 36 UGBA-DIN-36.......................... 36 UGBKIT............................... 34 UGBKIT-0210.......................... 34 UGBKIT-0210-T......................... 34 UGBKIT-0212.......................... 34 UGBKIT-0212-T......................... 34 UGBKIT-0214.......................... 34 UGBKIT-0214-T......................... 34 UGBKIT-0412.......................... 35 UGBKIT-0412-T......................... 35 UGBKIT-0414-T......................... 35 UGBKIT-0420.......................... 36 UGBKIT-0420-T......................... 36 UGBKIT-0424.......................... 36 UGBKIT-0424-T......................... 36 UGBKIT-2............................. 34 UGBKIT-2T............................. 34 UGBKIT-T.............................. 35 WGB4-127............................ 23 WGB4-132............................ 23 WGB4-180............................ 23 WGB4-220............................ 23 WGB4-240............................ 23 WGB4-37............................. 23 WGB4-43............................. 23 WGB4-52............................. 23 WGB4-63............................. 23 WGB4-64............................. 23 WGB4-77............................. 23 WGB4-85............................. 23 WGB4-90............................. 23 WGB5-122............................ 23 WGB5-132............................ 23 WGB5-180............................ 23 WGB5-220............................ 23 WGB5-240............................ 23 WGB5-37............................. 23 WGB5-43............................. 23 WGB5-52............................. 23 WGB5-63............................. 23 WGB5-64............................. 23 WGB5-77............................. 23 WGB5-85............................. 23 WGB5-90............................. 23 Idex 60
Oe Compay. A World of Solutios. Adrew Corporatio 3 Westbrook Corporate Ceter Suite 900 Westchester, IL 60154 Customer Support Ceter From North America Telephoe: 1-800-255-1479 Fax: 1-800-349-5444 Iteratioal Telephoe: +1-708-873-2307 Fax: +1-708-349-5444 Iteret: www.adrew.com All desigs, specificatios, ad availabilities of products ad services preseted i this catalog are subject to chage without otice. Bulleti CA-101772-EN (06/07) Prited i the USA 2007 Adrew Corporatio, Westchester, IL 60154 USA