695159 Instruction Manual Function Description ( Receiver ) Automatic and manual receive the radio signal (DCF) Max/Min display for indoor / outdoor temperature and humidity Time Zone select:-12~+12 Hour differences Dual time zone selection Continuous calendar up to year 2099 Calendar display ( Date / Month / weekday ) Auto adjust to Winter / Summer time ( DST) Moon of phase / selection Indoor temperature trend displays Low-battery indication for wireless remote sensor Air press trend indication display 12HR air pressure history 12/24 hour format selectable Alarm and Snooze Backlight for 5 seconds 5 weather icons: sunny/party sunny/cloudy/rainy/storm rain 3 comfort icons display ( DRY / COMFORT / WET ) Weekday display in 7 languages ( English-German-French-Italian-Dutch-Spanish-Danish ) Outdoor temperature measuring range -50~+70 Indoor temperature measuring range 0~+50 Outdoor / indoor humidity measuring range : 20-95%RH Receiver (Clock ) can receive 3 wireless remote sensors ( channel 1/2/3 ) Battery: DC 1.5V AA size X 3 PCS Wireless Remoter Sensor ( Transmitter ) Transmitter frequency :433 MHz 3 channels by option Range of transmitter is up to 30m Battery : DC 1.5V AAA size X 2 PCS Receiver Unit Appearance: Front View Front View
Top View Back View Part A-LCD A1: Max-Min memory A2: Indoor temperature and humidity A3: Channel A4: Outdoor temperature and humidity A5: RF icon A6: Transmitter Low battery power display A7: Alarm icon A8: Dual time ( DCF ) A9: Calendar A10: Radio controlled time A11: Radio controlled icon A12: 12HR air pressure history A13 Moon of phase A14: Barometric air pressure A15: comfort icons A16: Air pressure trend indication A17: Weather forecast icon Part B-Buttons B1: DOWN WAVE button B2: - ( UP / MEM ) button B3: CHANNEL button B4: SNOOZE / LIGHT button B5: ALM-SET button B6: SET button B7: RESET button Part C-Structure C1: Insert DC adapter jack C2: Stand C3: Battery door C4: Wall mount hole Wireless Remote Sensor Appearance: Front View Back View Back View
Part D-LCD D1: Outdoor temperature / humidity display D2: RF icon D3: Low battery display D4: Channel Part E- Buttons E1: Reset button E2: Channel select switch button E3: / button Part F-Structure F1: Transmitter Lens F2: Transmitter indication LED F3: Gases hole F4: Wall mount hole F5: Battery door F6: Battery compartment Manual Time Setting : The setting sequence is shown as follow: Year-Month-Date- Time Zone - 24 HR -Hour-Minute-Weekday Languages In time mode, press and hold down the SET(B6) button for 3 seconds, the year display 2011 starts to flash, now use +(B1) or -(B2) buttons to set the correct year. Press B6 to confirm your setting, the month display starts to flash, Now use +(B2) or (B1) buttons to set the correct month. Press B6 to confirm your setting, the date display starts to flash, Now use +(B2) or (B1) buttons to set the correct date. Press B6 to confirm your setting, the 00 display starts to flash. Now use +(B2) or (B1) buttons to set correct time zone. Press B6 to confirm your setting, the12/24 HR display starts to flash. Now use +(B2) or (B1) buttons to set correct time format. Press B6 to confirm your setting, the hour display starts to flash. Now use +(B2) or (B1) buttons to set correct hour. Press B6 to confirm your setting, the minute display starts to flash. Now use +(B2) or (B1) buttons to set correct minute. Press B6 to confirm your setting,the language selection for the weekday displays states to flash, Now use +(B2) or (B1) buttons to select a language.. Press B6 to confirm your setting and to end the setting procedures. After 10 seconds without pressing any button the receiver switches automatically from setting mode to Normal clock mode. Setting The Daily Alarms : In time mode, press ALM SET (B5) button one time, and the icon appears, again press and hold down the B2 button for 3 seconds until AL hour icon starts to flash, now use +(B2) or "-(B1) buttons to set your want time, and press B5 to confirm your setting, AL minute display start to flash, press +(B2) or (B1) buttons to set you want time. And press B5 to confirm your setting. If you want cancel the alarm, please change the alarm mode and press B5 button one time to cancel the alarm, and the icon disappears. To Use Snooze Alarm: When time reaches your set alarm time,your clock will give beep sound to wake up, the Press SNOOZE/LIGHT(B4) button once to stop the alarm temporarily, the will beep again in 5 minutes. icon will flash.. icon keeps flashing,the alarm
To stop the alarm, press anything button once,the alarm beep will stop and the beep again same time next day. Alarm Duration : 2 minutes. Snooze Duration: 5 minutes icon become static,alarm will Reception Of The Radio Signal : When you insert the batteries, all the icons on the LCD display will briefly up for 3 seconds, and you will hear a beep tone. The Receiver (clock ) will now start to make a connection to the wireless remote sensor, this operation takes about 3 minutes and is displayed by flashing reception RF symbol on the LCD display. After receiver has created a connection to the wireless remote sensor ( after 3 minutes ), it will then begin the automatic reception of the DCF radio signal, this operation takes up to 7 minutes and is display by flashing radio mast symbol on the LCD display. If reception is successful, then the radio controlled icon will appear continuously on the LCD display. The Receive automatically must scan the DCF signal at 1:00 a.m.2:00 a.m.3:00 a.m.everyday, if it receiver DCF signal at 3:00 a.m. it will stop receiving until 1:00 a.m. next day.but if it fail reception at 3:00 a.m,it will repeat again at 4:00 a.m.5:00 a.m. This procedure is repeated automatically up to 5 times. If this automatic process is unsuccessful, then use a sharp object to press the RESET (B6) button on the Receiver. Remarks : A flashing radio mast symbol indicates that the DCF signal reception has started. A continuously displayed radio mast symbol indicates that the DCF was received successfully. We recommend a minimum distance of 2.5 meters (8.2 Feet) to all sources of interference such as televisions or computer monitors. Radio reception is weaker in rooms with concrete walls (e.g. in cellars) and in offices. In extreme cases, place the system at a window. As there is less atmospheric interference at night, radio reception is normally possible at this time. A single synchronization each day is sufficient to keep the time display accurate to one second. Manual Receive Signal : To start DCF reception manually, press WAVE (B1) button for 2 seconds, The radio controlled icon starts to flash. if reception is successful the radio controlled icon on the LCD display. If you want to stop DCF reception, press and hold down WAVE (B1) for 2 seconds. If no signal is received within seven minutes, then the DCF signal search stops ( the radio controlled icon disappears ) and starts again the next full hour. DCF Signal Reception And Signal Indicator Weak or no DCF signal ( only icon flashing) Receiving strong DCF signal ( icon flashing ) Successful Reception ( icon becomes static) Failed Reception ( icon disappear) Remark: when your clock is receiving radio controlled time signal,all buttons except the snooze/light button do not function.
/ Temperature Display The temperature is displayed either in,briefly pressing the DOWN (B1) button allows you to switch between individual mode. Moon Phase and Tide Indication Moon phase will be displayed automatically according to current calendar. There are 8 different moon Phases (Moon phase icon Waning crescent; New moon; Waxing crescent; Waxing gibbous; First quarter; Waning gibbous; Full moon; Last quarter) ranging from New Moon to full Moon. Moonphase display is controlled by the current calendar. WET / COMFORT / DRY Icons DRY Humidity below 40% COMFORT Temperature 20-28 ( 68-82 ),humidity in 40-70% range NO Display WET Humidity over 70% When temperature isn t in 20-28 range, Humidity in 40-70% range Weather Forecaster Icon And Pressure Trend Indicator The Receiver (Clock ) has a built-in barometric sensor which measures the change of the air pressure over time,it takes around 24 hour go gather and average air-pressure reading to provide a weather forecast for next 12-24 hour. Weather Forecast Icons : There are four possible types of weather icons that will be displayed SUNNY PARTLY SUNNY CLOUDY RAIN RAINSTORM Air Pressure Tendency Indicators When the arrow upward appears, the air pressure is increasing, the weather is expected to improve When the arrow downward appears, the air pressure is decreasing, the weather is expected to become worse When the arrow horizontal appears, the air pressure change is stable Air Pressure History Bar Chart The bar chart indicates the air pressure history trend over the last 12 hours in 6 steps :0h,-1h,-2h,-3h,-6h and -12h The oh represent the current full hour air pressure recording The columns represent the hpa at specific time
If the bars are raising it means that the weather is getting better due to the increase of air pressure If the bars go down, it means the air pressure has dropped and the weather is expected to get worse from the present time 0h Remarks : Moving your weather from one floor of a building to another floor will affect the accuracy of your Receiver, which should operate at the same altitude all the time, if you move it to a new location, it will take 12-24 hour to get stable and accurate again. As you go higher in the air, the atmospheric pressure decreases, the exact pressure at a particular altitude depends of weather conditions, but a couple of approximations and a formula can give you a general idea of how pressure decreases with altitude, a rule of thumb for the altimeter correction is that the pressure drops about 1 hpa for each 8 meters of altitude gain, these rules work quite well for elevations or altitudes of less than two or three thousand feet. Our Receiver provides next 12-24 hours weather forecast, it may not match with the current weather condition outside. TO Read Maximum-Minimum Indoor /Outdoor Temperature And Humidity: Press the UP/MEM (B2) button to show the maximum indoor /outdoor temperature and humidity with MAX icons appearing on the display. Press the UP/MEM (B2) button again to show the maximum indoor / outdoor temperature and humidity with MIN icons appearing on the display. In MAX/MIN mode,hold UP/MEM ( B2) button for 3 seconds to clear the recorder max/min reading. Press DOWM (B1) button to select indoor/outdoor temperature in Celsius( )mode or Fahrenheit ( ) mode. Display Outdoor Temperature : Press CHANNEL(B5) button to show the 3 channel temperature, the sequence is shown as follow: Press CHANNEL (B3) Press CHANNEL (B3) Press CHANNEL (B3) If only one sensor is registered, press CHANNEL (B3) button will has no function Hold CHANNEL(B3) button for 3 seconds to cancel unused channel manually, it will automatically search and register a new channel again if a new channel is received, if there no temperature display in existing channel ( --- --- is display on the LCD), hold CHANNEL (B3) button for 3 seconds to cancel that channel and receive the channel again. Wireless Remote Sensor Registration Procedure : The wireless remote sensor will automatically transmit temperature to the receive (clock ) after batteries inserted. For having more than one external transmitter,select the channel (CH1-CH2-CH3) to ensure each wireless remote sensor is transmitting different channel before inserting batteries, the channel selecting switch (E2) button is at the back of the wireless remoter sensor. Press / (E3) button on the wireless remote sensor, to select displayed in Celsius mode or Fahrenheit mode