Revision 1.0 Parts List Mini

Similar documents
Revision 3.0 Parts List Minex 1~ Minex Lite, Minex 3~

Revision 3.0 Parts List Salvador 1~, 3~

Revision 2.0 Parts List Minor

Revision 2.0 Parts List Minette 1~, 3~

Revision 1.0 Parts List Salvador 1~, 3~

Revision 1.0 Parts List Minor

Revision 1.0 Parts List Mega

Revision 1.0 Parts List Mega

Parts List _2.1. Flygt /.890

Parts List _2.1. Flygt /.190

Flygt /190. Parts List

Flygt Handleiding voor installatie, bediening en onderhoud

Flygt D 8050, 50 Hz. Technical specification

Phone Horizontal Multistage Pumps Horizontal Stainless Steel Multistage Pumps 3, 6, 9 m³/h

Dewatering. Series description Wilo-Drain STS 65. Submersible sewage pump

PARTS LIST FOR CM-1250-A/C 1.5 HP

Inductive sensor NI3-EG08K-Y1-H1341

Inductive sensor BI1.5-EG08K-Y1

Series description: Wilo-Drain VC

Pendant Light Fitting IEC Series 6470/2

AristoMig U320w 208/230/400/460/475/500 V 3~ 50/60 Hz With cooling unit and central connection

Immersion Pumps HCT (High Chem) sealless EN

Inductive sensor NI10-M18-Y1X-H1141

Data sheet: Wilo-Drain TP 65 E 114/11 (1~230 V)

CM MTC PARTS LIST

Gear Pump Units For single-line centralized lubrication systems

Data sheet: Wilo-Drain TP 50 E 101/5,5 (1~230 V)

Linear flow control with actuator IFC

Immersion Pumps HCT (High Chem) sealless

SOGEVAC. Rotary Vane Vacuum Pumps single-stage, oil-sealed, m 3 x h -1 ( cfm)

Okta 1000, Roots pump without motor

MIKRO POWER FACTOR CORRECTION COMPONENTS

Operating Instructions 07/2007 Edition. SINAMICS G130/G150 Line harmonics filter. sinamics

SQM40/41 Actuators for air and gas dampers

Roots pumps with a pumping speed of 280 to 840 m 3 /h: Okta 500 DUO DN1 DN B A

Okta 600, Roots pump, 230/400 V, 50 Hz; 265/460 V, 60 Hz

Installation Manual IPT Installation of skillet systems with 125 A track current. MV a-E.

Bimetal Temperature Switch

820 NOVA 820 NOVA. 1 Control knob. 2 Pressure regulator cap screw 3 Pilot gas rate adjuster 4 Thermocouple connection

R407C compressors. New: Semi-hermetic compressors for air-conditioning applications with R407C

DMP 335. Industrial Pressure Transmitter. Welded, Dry Stainless Steel Sensor. accuracy according to IEC 60770: 0.5 % FSO.

82540/ /2-way diaphragm valves

Installation and Operating Instructions Electric Vibrators HV/VFL/HF Series

EXPlora. Introduction

Pendant Light Fittings Series 6050

2100/2200/4100/6200 & MPB Series Bottom Mount Drive Pack. for Standard Load Parallel Shaft 60 Hz Gearmotors

PDP Series. Positive displacement dosing pump. Sandwich hydraulic diaphragm type with an internal relief-refilling valve SDI. The right dosing choice

Duo 65 M, 3-phase motor, 3TF, 230/400 V, 50 Hz; 265/460 V, 60 Hz

DMP 331 DMP 331. Industrial Pressure Transmitter. for Low Pressure. Stainless Steel Sensor. Pressure Transmitter. Industrial. tri-matic.

DS 400 P. Intelligent Electronic Pressure Switch in Hygienic Stainless Steel Ball Housing. on hygienic process connections

CM MVC & CM MHC PARTS LIST

Series description: Wilo-Sub TWU 3 HS

2100, 2200, 4100, 6200, MPB Series Side Mount Drive Package for Light Load 60 Hz Gearmotors

Duo 65 MC, 3-phase motor, 3TF, 230/400 V, 50 Hz 265/460 V, 60 Hz

SP 1U CNC Die sinking EDM

DMP 343. Industrial Pressure Transmitter. Without Media Isolation. accuracy according to IEC 60770: 0,35 % FSO. Nominal pressure

SOGEVAC. Rotary Vane Vacuum Pumps single-stage, oil-sealed, m 3 x h -1 ( cfm) Central Vacuum Supply Systems

SINAMICS G130 / G150. Line harmonics filter. Operating Instructions 05/2010 SINAMICS

Series description: Wilo-Jet HWJ

1.2 EUREKA Series... from page c.14

Linear flow controls VFC Linear flow controls with actuator IFC

Admiss. counterpressure

Up to 85% higher Service Life due to efficient sealing method.

Inductive sensor With analog output BI15-M30-LI-EXI

Screw pump Series ALLFUEL AFT

Model ED 400 Drying and heating chambers Classic.Line with natural convection

DMP 331i DMP 333i. Precision Pressure Transmitter. Stainless Steel Sensor. accuracy according to IEC 60770: 0.1 % FSO

Installation. SAPTF33xx-1xx in the Network. Standard Configuration

8 Installation Equipment

DMP 335 DMP 335. Industrial Pressure Transmitter. Welded, Dry Stainless Steel Sensor. Pressure Transmitter. Industrial

SIDE CHANNEL BLOWERS. Voltage Δ / Y 2 V 230/ / / / / /460 - Current Δ / Y Revolutions

Contactor 4 kw / 400 V with 3 Main Contacts and max. 4 Auxiliary Contacts Series 8510/122

Duo 65, 3-phase motor, 3TF, 230/400 V, 50 Hz; 265/460 V, 60 Hz

LC1D32P7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 32 A V AC 50/60 Hz coil

Modular Lube Lubrication Systems System Controls

LC1D12P7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 12 A V AC coil

DMP 331Pi. Precision. Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm. Pressure Transmitter.

CME500 SERVICE PARTS

R87B. Box Fan. Comprehensive Lineup of Single, Double, and Triple Axial Fans with Easy One-step Mounting. Model Number Structure. Ordering Information

Operating instructions

Agilent High Capacity RV Pumps & Roots Pumping Systems

EXEL. Ex de. - Double locking system operated by hexagonal-head tool - Double channel electronic ballast - Zones 1, 2, 21, 22. G13 bi-pin lamp holder

AP2-3 AT2-3/AT2V-3V ATE2/ATE2V

Duo 65 C, 3-phase motor, 3TF, 230/400 V, 50 Hz 265/460 V, 60 Hz

Actuators IC 20, IC 40

Gear Pump Units. For single-line lubrication systems

SMALL OIL SEALED PUMPS

Sentronic PLUS Electronic Pressure Regulator. Installation Manual

Contactors. Agency approvals. UL 508 Guide No. NLDX2, File # E CE/Semko Certified EN :1991 IEC DP 30 C 3P - 1 /B

7 Lighting Technology

Briggs&Stratton 44Q B1

High performance circuit breakers

Circuit-Breakers for Motor Protection Series 8523/8

Type: DILM25 10(24V50HZ) Article No.:

Product Data Sheet 4656 ZW

Guide for installers. METTLER TOLEDO MultiRange System solution Point Ex.

LC1D12B7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 12 A - 24 V AC coil

Flygt Submersible Motor Cables

LC1D65AF7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 65 A V AC 50/60 Hz coil

Guide for installers. METTLER TOLEDO MultiRange System solution analog Ex1. Hazardous area. Safe area

Transcription:

Revision.0 www.grindex.com Parts List 822.2 Mini

Table of Contents Table of Contents Introduction... 2 Specially approved products...2 Product Description...3 Products included... 3 The data plate...3 Exploded Views...4 822.2...4 Spare Parts... 5 822.2...5 822.2 Mini Parts List

Introduction Introduction Purpose of this manual The purpose of this manual is to provide necessary information on spare parts and accessories order. Disclaimer Always use genuine Grindex parts. The use of other spare parts or accessories can invalidate any claims for warranty or compensation. Grindex does not take any responsibility for damages that are caused by the use of non-original parts. For more information, contact your local sales and service representative. Data for ordering spare parts The following information is needed for spare part orders: Serial number of the product Part number Quantity of bulk material, see * in tables Specially approved products Qualification of personnel Only Grindex or Grindex-authorized service personnel may undertake repair work on Ex-approved products. Dimensional accuracy inspection Spare parts marked with (Ex) after the part number are subject to dimensional accuracy inspection. 2 822.2 Mini Parts List

Product Description Product Description Products included The data plate Pump model Standard EX MSHA Drainage Sludge Mini 822.2 X X Introduction The data plate The data plate is a metal label located on the main body of the pump. The data plate lists key product specifications. 2 5 3 4 4 3 2 0 9 8 7 6 5 WS006202A. Pump model 2. Serial number 3. Phase; type of current; frequency 4. Product weight 5. Maximum capacity 6. Maximum submergence 7. Maximum head 8. Degree of protection 9. Read installation manual 0. Thermal class. International standard 2. Maximum power consumption 3. Country of origin 4. Rated current 5. Rated voltage Product approvals for hazardous locations 822.2 Mini Parts List 3

Exploded Views Exploded Views 822.2 27 2 3 4 5 28 5 29 6 7 30 8 9 2 806 3 0 29 3 32 4 33 5 5 6 34 O-RING KIT 7 35 36 5 8 9 20 37 800 38 FLOAT SWITCH KIT 2 39 40 84 22 4 BASIC REPAIR KIT 23 24 42 5 25 900 26 204B_expl_view_822.2 4 822.2 Mini Parts List

Spare Parts Spare Parts 822.2 Pos. No Part. No Denomination 40 777 Hex.socket hd screw M6X80-A2-70 2 5 649 00 Motor cable unit 532.U +H07RN-F 3X MM2 H07RN-F 3x 8,60-0mm L= 0m Supply connection: Plug IEC 83:975 C4 2 5 649 07 Motor cable unit H07RN-F 3x 8,60-0mm L= 0m Supply connection: Plug (2P+J) SEV 0 S24507 2 5 649 0 Motor cable unit SOOW-6AWG/3 5V USA CDN 2 5 649 05 Motor cable unit SOW-6AWG/3 230V USA CDN 2 5 649 04 Motor cable unit H07RN-F 3X MM2 0V GB 2 5 649 02 Motor cable unit H07RN-F 3X MM2 230V GB 2 5 649 03 Motor cable unit H07RN-F 3X MM2 230V AUS SOW 6AWG/3 9,78-0,90mm L= 6m Supply connection: Plug IEC 83:975 A5-5 SOW 6AWG/3 9,78-0,90mm L= 6m Supply connection: Plug IEC 83:975 A6-5 H07RN-F 3x 8,70-9,30mm L= 0,60m Supply connection: Plug for FGB (2P+E), fuse 6A, 0-5V H07RN-F 3x 9 L= 9,50m Supply connection: Plug for FGB, fuse 3A, 230-240V H07RN-F 3x 9 L= 9,50m Supply connection: Plug for FAUS 230-240V 3 5 650 00 Plug 4 40 778 O-ring 20.0X2.0 NBR 5 40 757 Hex.socket hd screw M6X35-A2-70 6 5 65 00 Handle 7 50 02 00 Hex.socket hd screw M8X25-A2-70 8 32 289 Plain washer 8-A2-70 9 50 839 00 Discharge connection 2" DN 50 Hose Thread : ISO G2A Outer Second outlet included 9 50 839 02 Discharge connection G2" DN 50 Thread : ISO G2A Outer Quick coupling: Storz DN 50 Hose Thread : ISO G2A Outer Second outlet included Qty/Version 2 3 2 2 822.2 Mini Parts List 5

Spare Parts Pos. No Part. No Denomination 9 50 839 0 Discharge connection NPSM 2" DN 50 Thread : NPSM 2- /2 Outer 9 40 027 Coupling part DN 50 Thread : ISO G2A Outer Quick coupling: Storz 9 30 756 Discharge connection DN 50 HOSE DN 50 Hose aluminium 9 3 409 Discharge connection DN 50 Thread : ISO G2A Outer aluminium 0 50 037 52 O-ring 52.5X3.0 NBR 2 5 652 00 Data plate 3 5 653 00 Cover unit 3, 50 836 03 Air release valve 3,2 - Cover 4 30 944 O-ring 49.3X5.7 NBR 5 50 893 02 Capacitor 30 MFD 275V Stator -phase 50 Hz 2- poles 5V 5 5 662 00 Starter unit Stator -phase 50 Hz 2- poles 230V-240V 5 50 893 03 Capacitor 35 MFD 275V Stator -phase 60 Hz 2- poles 5V 5 50 893 0 Capacitor 4 MFD 450V Stator -phase 60 Hz 2- poles 220V-230V 6 40 780 Terminal device 48X2X6 MAX.380V 8A 6 40 78 Terminal device 54X2X8.5 MAX.380V 8A -phase 7 5 655 00 Cooling jacket 8 40 008 Hex.socket hd screw M4X6-A2-70 9 50 844 04 Motor switch 5V 50HZ Stator -phase 50 Hz 2- poles 5V 9 50 844 05 Motor switch 230V 50HZ Stator -phase 50 Hz 2- poles 230V-240V 9 50 844 06 Motor switch 5V 60HZ Stator -phase 60 Hz 2- poles 5V 9 50 844 07 Motor switch 230V 60HZ Stator -phase 60 Hz 2- poles 220V-230V 20 32 07 O-ring 99.5X3.0 NBR 2 5 654 00 Stator housing 22 50 780 00 Stator 2-08-2b -phase 50 Hz 2-poles 5V -phase 60 Hz 2-poles 5V Qty/Version 2 6 822.2 Mini Parts List

Spare Parts Pos. No Part. No Denomination 22 50 780 0 Stator 2-08-2b -phase 60 Hz 2-poles 220V-230V -phase 50 Hz 2-poles 230V-240V 23 50 452 00 Spring washer 3.5X25X0.35 24 50 037 35 O-ring 26.0X.2 NBR 25 50 287 02 Ball bearing 2X32X0 26 5 656 0 Shaft unit 27 50 287 0 Ball bearing 5X35X 28 5 657 00 Bearing housing 29 50 037 38 O-ring 4.5X3.0 NBR 2 30 50 037 02 O-ring 04.5X3.0 NBR 3 50 453 00 Retaining ring 32 50 443 00 Oil housing 33 5 658 00 Washer 34 50 447 00 Wear protection 35 50 436 02 Torque flow impeller N 50Hz -phase Max ambient temp=40 DC 35 5 659 0 Torque flow impeller N 60Hz -phase Max ambient temp=40 DC 35 50 436 00 Impeller N 50Hz -phase Max ambient temp=40 DC 36 50 020 05 Plain washer 37 50 896 00 Diffuser unit 38 50 037 34 O-ring 0.3X2.4 NBR 39 - Inspection screw 40 50 440 00 Strainer 4 5 660 00 Barrel nut 3 42 50 020 06 Plain washer 902-6,4X8X,6 800 5 663 00 O-ring kit 806 50 965 00 Seal kit 807 50 966 00 Outer seal kit 84 5 665 00 Level regulator kit 84 5 665 0 Level regulator kit 900 5 664 00 Basic repair kit 900, 50 452 00 Spring washer 3.5X25X0.35 900,2 50 037 35 O-ring 26.0X.2 NBR 900,3 50 287 0 Ball bearing 5X35X 900,4 50 287 02 Ball bearing 2X32X0 Qty/Version 2 3 822.2 Mini Parts List 7

www.grindex.com Grindex Gesällvägen 33 74 07 Sundbyberg Sweden Tel: +46-8-606 66 00 Fax: +46-8-745 53 28 www.grindex.com Visit our Web site for the latest version of this document and more information The original instruction is in English. All non-english instructions are translations of the original instruction. 204 Grindex 885499_.0_en-US_205-06_GPL.822.2