DET NORSKE VERITAS TYPE APPROVAL CERTIFICATE CERTIFICATE NO. E-12360 This is to certify that the Cable Gland with type designation(s) ADE & RE; AD; FF; MM; SP; ET; LN. Manufactured by COOPER CAPRI SAS NOUAN LE FUZELIER, France is found to comply with Det Norske Veritas' Rules for of Ships, High Speed & Light Craft and Det Norske Veritas' Offshore Standards Application Hazardous areas cable glands & cable gland's accessories. The manufacturer's installation description to be followed. This Certificate is valid until 2015-12-31. Issued at Høvik on 2013-08-02 DNV local station: Le Havre for Det Norske Veritas AS Approval Engineer: Nicolay Horn Marit Laumann Head of Section This Certificate is subject to terms and conditions overleaf. Any significant change in design or construction may render this Certificate invalid. The validity date relates to the Approval Certificate and not to the approval of equipment/systems installed. If any person suffers loss or damage which is proved to have been caused by any negligent act or omission of Det Norske Veritas, then Det Norske Veritas shall pay compensation to such person for his proved direct loss or damage. However, the compensation shall not exceed an amount equal to ten times the fee charged for the service in question, provided that the maximum compensation shall never exceed USD 2 million. In this provision "Det Norske Veritas" shall mean the Foundation Det Norske Veritas as well as all its subsidiaries, directors, officers, employees, agents and any other acting on behalf of Det Norske Veritas. Form No.: TA 1411a Issue: December 2012 Page 1 of 8
Product description I) ADE-1F2, ADE-1F2-Anchorage, ADE-4F, ADE-5F, ADE-6F, ADE-1FC & ADE-6FC cable glands ADE-1F2, IEC60079-0:2011, IEC60079-1:2007, IEC60079-7:2006, The user shall provide additional clamping of the cable nearby to the enclosure. A Cooper Capri Clamping module can be used. -30 to +80 C with Neoprene sealing ring -70 to +140 C with Silicon sealing ring Neoprene or Silicone Unarmoured Gland size n 3 to n 17, for cable outer diameter from Ø 2.75 to104mm Metric thread size: 10, 12, 16, 20, 25, 32, 40, 50, 63, 75, 90, 110. NPT thread size: ⅛, ¼, ⅜, ½, ¾, 1, 1 ¼, 1 ½, 2, 2½, 3, 3½, 4. Clamping module, Shroud, Locknut, Earth-tag, Thread-seal, Serratedwasher, Adaptor, Reducer and Stopper-plug ADE-1F2 Anchorage, IEC60079-0:2011, IEC60079-1:2007, IEC60079-7:2006, -30 to +80 C with Neoprene sealing ring -70 to +140 C with Silicon sealing ring Neoprene or Silicone Unarmoured Gland size n 3 to n 17, for cable outer diameter from Ø 2.75 to104mm Metric thread size: 10, 12, 16, 20, 25, 32, 40, 50, 63, 75, 90, 110. NPT thread size: ⅛, ¼, ⅜, ½, ¾, 1, 1 ¼, 1 ½, 2, 2½, 3, 3½, 4. Shroud, Locknut, Earth-tag, Thread-seal, Serrated-washer, Adaptor, Reducer and Stopper-plug Form No.: TA 1411a Issue: December 2012 Page 2 of 8
ADE-4F. -30 C to +80 C with Neoprene sealing ring -60 C to +140 C with Silicone sealing ring Brass (option of stainless steel, marin bronze or aluminium versions) Neoprene or Silicon Armoured or braided Gland size n 4 to n 17 for cable outer diameter from Ø 4,5 to 104 mm Metric thread size: 10, 12, 16, 20, 25, 32, 40, 50, 63, 75, 90, 110. NPT thread size: ⅛, ¼, ⅜, ½, ¾, 1, 1 ¼, 1 ½, 2, 2½, 3, 3½, 4. ADE-5F. -30 C to +80 C with Neoprene sealing ring -60 C to +140 C with Silicone sealing ring Brass (option of stainless steel, marin bronze or aluminium versions) Neoprene or Silicon Armoured or braided Gland size n 4 to n 17 for cable outer diameter from Ø 4,5 to 104 mm Metric thread size: 10, 12, 16, 20, 25, 32, 40, 50, 63, 75, 90, 110. NPT thread size: ⅛, ¼, ⅜, ½, ¾, 1, 1 ¼, 1 ½, 2, 2½, 3, 3½, 4. Form No.: TA 1411a Issue: December 2012 Page 3 of 8
ADE-6F With braided cable, the user shall provide additional clamping of the cable nearby to the enclosure. A Cooper Capri Clamping module can be used. -30 C to +80 C with Silicone internal sealing (Diaphragm) and Neoprene or Silicone external sealing ring. Neoprene or Silicon Armoured or braided N 5 to N 11, for cable outer diameter from Ø 6 to 48 mm Metric thread size: 16, 20, 25, 32, 40, 50, 63. NPT thread size: ⅜, ½, ¾, 1, 1 ¼, 1 ½, 2 Clamping flanges, Shroud, Locknut, Earth-tag, Thread-seal, Serratedwasher, Adaptor, Reducer and Stopper-plug. ADE-1FC All sizes N 4 to N 16: Additional classification for sizes N 11 to N 16: -60 C to +80 C with internal TSC Compound & Neoprene or Silicone external sealing ring. TSC Compound and Neoprene or Silicone external sealing ring Unarmoured. N 4 to N 16, for cable outer diameter from Ø 4 to 93 mm Metric thread size: 16, 20, 25, 32, 40, 50, 63, 75, 90, 110. NPT thread size: ⅜, ½, ¾, 1, 1 ¼, 1 ½, 2, 2½, 3, 3½, 4. Clamping flanges, Shroud, Locknut, Earth-tag, Thread-seal, Serratedwasher, Adaptor, Reducer and Stopper-plug. Form No.: TA 1411a Issue: December 2012 Page 4 of 8
ADE-6FC All sizes N 5 to N 17: Additional classification for sizes N 11 to N 17: -60 C to +80 C with internal TSC Compound & Neoprene or Silicone external sealing ring. TSC Compound and Neoprene or Silicone external sealing ring Armored or braided cable N 5 to N 17, for cable outer diameter from Ø 6 to 104 mm Metric thread size: 16, 20, 25, 32, 40, 50, 63, 75, 90, 110. NPT thread size: ⅜, ½, ¾, 1, 1 ¼, 1 ½, 2, 2½, 3, 3½, 4. Clamping flanges, Shroud, Locknut, Earth-tag, Thread-seal, Serratedwasher, Adaptor, Reducer and Stopper-plug. II) ADE-1F, ADE-1FLC, ADE-6FLC & Accessories ADE-1F EN/IEC60079-0:2004, EN/IEC60079-1:2004, EN/IEC60079-7:2003, IEC 61241-0:2004, IEC 61241-1:2004 Hazardous Area Ex d IIC / Exe II / Ex nr / Ex td LCIE 97ATEX 6008 X and IECEx LCI 05.0004 X -60 to +80 C / -40 to +100 C with Neoprene sealing ring -70 to +220 C with silicon sealing ring IP66, IP67 &IP68 (10m depth). To provide an Ingress Protection rating greater than IP 54, a sealing washer (gasket) provided by Capri must be used. Brass (option of stainless steel, marin bronze or aluminium versions) Black neoprene or Red silicon Unarmoured Gland size n 4 to n 17 Metric thread size: 12, 16, 20, 25, 32, 40, 50, 63, 75, 90, 110. NPT thread size: ¼, ⅜, ½, ¾, 1, 1 ¼, 1 ½, 2, 2½, 3, 3½, 4. Form No.: TA 1411a Issue: December 2012 Page 5 of 8
ADE-1FLC EN/IEC60079-0:2004, EN/IEC60079-1:2004, EN/IEC60079-7:2003, IEC 61241-0:2004, IEC 61241-1:2004 Hazardous Area Ex d IIC / Ex e II / Ex nr / Ex td LCIE 97ATEX 6008 X and IECEx LCI 05.0004 X -60 to +80 C with filling compound IP66, IP67 &IP68 (10m depth) To provide an Ingress Protection rating greater than IP 54, a sealing washer (gasket) provided by Capri must be used. Brass (option of stainless steel, marin bronze or aluminium), may be plated or coated. Filling compound Black neoprene Unarmoured Gland size n 5 to n 11 Metric thread size: 16, 20, 25, 32, 40, 50, 63. NPT thread size: 3/8, ½, ¾, 1, 1 ¼, 1 ½, 2. ADE-6FLC EN/IEC60079-0:2004, EN/IEC60079-1:2004, EN/IEC60079-7:2003, IEC 61241-0:2004, IEC 61241-1:2004 Hazardous Area Ex d IIC / Ex e II / Ex nr / Ex td LCIE 97ATEX 6008 X and IECEx LCI 05.0004 X -60 to +80 C with filling compound IP66, IP67 &IP68 (10m depth) To provide an Ingress Protection rating greater than IP 54, a sealing washer (gasket) provided by Capri must be used. Brass (option of stainless steel, marin bronze or aluminium), may be plated or coated. Filling compound Black neoprene Armoured or braided. Gland size n 5 to n 11 Metric thread size: 16, 20, 25, 32, 40, 50, 63. NPT thread size: 3/8, ½, ¾, 1, 1 ¼, 1 ½, 2. Form No.: TA 1411a Issue: December 2012 Page 6 of 8
Cable Gland s Accessories: RE: Reducer AD: Adaptor FF: Female Female Adaptor MM: Male Male Adaptor SP: Stopper Plug ET: Earth Tag LN: Lock Nut EN/IEC60079-0:2004, EN/IEC60079-1:2004, EN/IEC60079-7:2003, IEC 61241-0:2004, IEC 61241-1:2004 Hazardous Area Ex d IIC / Ex e II / Ex nr / Ex td LCIE 08 ATEX 6085 X and IECEx LCI 08.0035 X -60 C to +100 C for Metallic Accessories with Neoprene sealing washer (gasket). -70 C to +220 C for Metallic Accessories with fiber sealing washer (gasket). IP66, IP67 &IP68 (10m depth) To provide an Ingress Protection rating greater than IP 54, a sealing washer (gasket) provided by Capri must be used. Brass (option of stainless steel, marin bronze or aluminium), may be plated or coated. Non applicable Non applicable Metric thread size: 12, 16, 20, 25, 32, 40, 50, 63, 75, 90, 110. NPT thread size: ¼, 3/8, ½, ¾, 1, 1 ¼, 1 ½, 2, 2½, 3, 3½, 4. Non applicable Application/Limitation Manufacturer s application instructions to be followed. Manufacturer s assembly instructions to be followed. The information related to Ex certification from recognised test institution is given as information only. Approval documentation Approval documentation for cable gland s Accessories Tests carried out tests in according to IEC 60079-0, IEC 60079-1, and IEC 60079-7, UL standard. Marking of product Name of manufacturer type designation Ex rating. Certificate Retention Survey The scope of the retention/renewal survey is to verify that the conditions stipulated for the approval is complied with and that no alterations are made to the product design or choice of materials. The main elements of the survey are: Form No.: TA 1411a Issue: December 2012 Page 7 of 8
Inspection on factory samples, selected at random from the production line (where practicable) Results from Production Sample Tests (PST) and Routines (RT) checked (if not available tests according to PST and RT to be carried out) Review of type approval documentation Review of possible change in design, materials and performance Ensuring traceability between manufacturer s product type marking and Approval Certificate. Survey to be performed at least every second year. END OF CERTIFICATE Form No.: TA 1411a Issue: December 2012 Page 8 of 8