InGaAs multichannel detector head C8062-01 Designed for InGaAs linear image sensor The C8061/C8062-01 are multichannel detector heads for use with InGaAs linear image sensors. The is designed for the one-stage TE-cooled InGaAs linear image sensors and the C8062-01 for two-stage TE-cooled InGaAs linear image sensors.the and C8062-01 incorporate a low-noise driver/amplifier circuit that provide reliable operation from simple external signals. They also include a highly stable temperature controller that cools the sensor to a preset temperature level (: Ts= -10 C, C8062-01: Ts= -20 C) as soon as the power is turned on. If the cooler fails and overheat occurs, the built-in protection circuit automatically turns off the power to maintain safety. Despite its compact size, the housing configuration is designed for good heat dissipation, and threaded mounting holes on the front panel allow connections to other devices such as monochromators. Controller for multichannel detector head C7557-01 is also available. The software supplied with the C7557-01 allows easy control of the multichannel detector head and data acquisition. Features Designed for InGaAs linear image sensor : One-stage TE-cooled type C8062-01: Two-stage TE-cooled type Built-in driver/amplifier and temperature circuit Highly stable temperature controller Cooling temperature (Ta=10 to 30 C) fixed at Td=-10 ± 0.1 C (), -20 ± 0.1 C (C8062-01) Simple signal input operation Compact configuration Applications Near infrared multichannel spectroscopy Radiation thermometry Non-destructive inspection Optical fiber transmittance measurement Selection Guide The table below shows InGaAs image sensors applicable for the C8061/C8062-01. Scince the C8061/C8062-01 do not include a InGaAs image sensor, so select the desired sensor and order it sparately. Type no. C8062-01 InGaAs linear image sensor Type no. Cooling Number of Number of Pixel size Image size pixels effective pixels* 1 [µm (H) µm (V)] [mm (H) mm (V)] G9201-256S 256 256 50 250 12.8 0.25 G9202-512S 512 512 25 250 12.8 0.25 G9203-256S 256 256 50 500 12.8 0.50 G9204-512S One-stage 512 512 25 500 12.8 0.50 G9211-256S TE-cooled 256 >253 50 250 12.8 0.25 G9212-512S 512 >506 25 250 12.8 0.25 G9213-256S 256 >253 50 500 12.8 0.50 G9214-512S 512 >506 25 500 12.8 0.50 G9205-256W 256 >244 50 250 G9205-512W 512 >487 25 250 G9206-02 256 >244 50 250 G9206-256W Two-stage 256 >244 50 250 G9206-512W TE-cooled 512 >487 25 250 12.8 0.25 G9207-256W 256 >244 50 250 G9208-256W 256 >244 50 250 G9208-512W 512 >487 25 250 *1: Number of active pixels: The total number of pixels whose dark current and sensitivity uniformity do not exceed the maximum values. www.hamamatsu.com 1
Absolute maximum ratings Parameter Symbol Min. Typ. Max. Unit Supply voltage (for digital circuitry) VD1, VD2-0.5 - +7 Supply voltage (for analog circuitry) VA+ - - +18 VA- - - -18 Supply voltage Vp - - +7 VF - - +14 V Digital input voltage - - - VD1, VD2 Operating temperature Topr +10 to +30 Storage temperature Tstg 0 to +50 C Note: Exceeding the absolute maximum ratings even momentarily may cause a drop in product quality. Always be sure to use the product within the absolute maximum ratings. Electrical characteristics [unless otherwise noted, Ta=25 C, : VD1,VD2=+5 V, VA+=+15 V, VA-=-15 V, VD2=+5 V, Vp=+5 V, VF=+12 V C8062-01: VD1=+5 V, VA+=+15 V, VA-=-15 V, VD2=+6 V, Vp=+6 V, VF=+12 V] Parameter Symbol Min. Typ. Max. Unit Digital input High level VIH +2.0 - VD1, VD2 V Low level VIL -0.5 - +0.8 V Clock pulse frequency f - - 4 MHz Data video readout frequency fv - - f/8 Hz pulse width tst 1/f - - s Digital output High level (Io=-6 ma) VoH +2.0 - - V Low level (Io=+6 ma) VoL - - +0.8 V Power supply conditions Digital circuitry VD1 +4.75 +5.0 +5.25 V Analog circuitry VA1+ +14.5 +15.0 +15.5 V VA1- -14.5-15.0-15.5 V Voltage +4.75 +5.0 +5.25 V VD2 C8062-01 +5.75 +6.0 +6.25 V Other +4.75 +5.0 +5.25 V Vp C8062-01 +5.75 +6.0 +6.25 V VF +11.75 +12.0 +12.25 V VD1 (+5 V) - - - +100 ma VA+ (+15 V) - - - +200 ma VA- (-15 V) - - - -50 ma Current VD2 : +5 VDC C8062-01: +6 VDC - - - +50 ma Vp : +5 VDC - - +1.2 +1.7 A C8062-01: +6 VDC - - +2.0 +3.0 A VF (+12 V) - - - +200 ma 2
Electrical and optical characteristics [Unless otherwise noted, Ta=25 C, : Td=-10 C, G9211-256S (Cf=10 pf), VD1=+5 V, VA+=+15 V, VA-=-15 V, VD2=+5 V, Vp=+5 V, VF=+12 V C8062-01: Td=-20 C, G9208-256W (Cf=10 pf), VD1=+5 V, VA+=+15 V, VA-=-15 V, VD2=+6 V, Vp=+6 V, VF=+12 V] Parameter Symbol Min. Typ. Max. Unit Spectral response range - 0.9 to 1.67 - µm λ C8062-01 - 0.9 to 2.55 - µm Peak sensitivity wavelength - 1.55 - µm λp C8062-01 - 2.3 - µm Saturation output charge Qsat - 30 - pc Conversion gain* 2 G - 0.3 - V/pC Dark current - 0.1 3 pa/pixel ID C8062-01 - 500 2000 pa/pixel Photoresponse nonuniformity* - - ±5 % 3 PRNU C8062-01 - - ±10 % *2: Including the circuit gain *3: Measured at 50% of the saturated output charge. Except for the start pixel and the last pixel. Specifications for temperature controller [Unless otherwise noted, Ta=25 C, : Td=-10 C, VD1=+5 V, VA+=+15 V, VA-=-15 V, VD2=+5 V, Vp=+5 V, VF=+12 V C8062-01: Td=-20 C, VD1=+5 V, VA+=+15 V, VA-=-15 V, VD2=+6 V, Vp=+6 V, VF=+12 V] Parameter Symbol Min. Typ. Max. Unit Cooling temperature -11-10 -9 C Td C8062-01 -21-20 -19 C Temperature control range Td -0.1 - +0.1 C Power dissipation of peltier - - 7 W Pp element C8062-01 - - 11 W Cool down time to preset temperature to - - 5 min Setting temperature for overheat protection* 4 To - +45 - C *4: Temperature at back side of housing. (between housing and fin) Note: Other functions include error display, automatic power off, and detection of electrical oepns and shorts by the thermosensor. 3
Spectral response Photosensitivity (A/W) 1.5 1.0 0.5 Td=25 C Td=-10 C Td=-20 C G9206-256W G9201 to G9204 series G9211 to G9214 series G9205 series G9206-02 G9206-512W G9207-256W (Typ.) G9208 series 0 0.5 1.0 1.5 2.0 2.5 3.0 Wavelength (µm) KMIRB0071EC Equivalent circuit Equivalent circuit (G8050 to G8053/G8160 to G8163/G8180/G9201 to G9204/G9211 to G9214/G9205 to G9208 series) 1 pixel High gain Low gain Shift register Photodiode CDS Offset compensation circuit VIDEO AD-TRIG Timing generator Vdd INP Vss RESET Vref External input KMIRC0010ED 4
Block diagram 1 (when used in combination with 256-pixel image sensor) TE+ Thermo-electric cooler InGaAs image sensor G9201-256S G9203-256S G9211-256S G9213-256S G9205-256W G9206-02 G9206-256W G9207-256W G9208-256W TE- THERM THERM INP Vref Vdd Vss Reset Cf select AD-TRIG Voltage regulator Amplifier Temperature controller TH. H Timing generator LED VP * P.GND VD2 * VF (+12 V) F.GND Temp monitor Cooling control VD1 (+5 V) VA1+ (+15 V) VA1- (-15 V) A.GND Cf SEL Video Data video Amplifier MUX & Amplifier DC clamp Buffer amplifier * +5 V (), +6 V (C8062-01) KACCC0193ED Block diagram 2 (when used in combination with 512-pixel image sensor) TE+ Thermo-electric cooler TE- THERM THERM InGaAs image sensor G9202-512S INP G9204-512S Vref G9205-512W Vdd G9206-512W Vss G9208-512W G9212-512S G9214-512S -odd, -even Reset-odd, Reset-even Cf select AD-TRIG-odd, AD-TRIG-even Video-odd Voltage regulator Amplifier Temperature controller TH. H Timing generator LED VP* P.GND VD2* VF (+12 V) F.GND Temp monitor Cooling control VD1 (+5 V) VA1+ (+15 V) VA1- (-15 V) A.GND Cf SEL Data video Video-even Amplifier MUX & Amplifier DC clamp Buffer amplifier * +5 V (), +6 V (C8062-01) KACCC0194ED 5
Timing chart 1 (when used in combination with 256-pixel image sensor) Clock Reset Video Data valid 2 clocks 8 clocks 8 (N-1) clocks 17 clocks ch 1 ch 2 ch 3 ch 4 ch (N-3) ch (N-2) ch (N-1) ch N ch 1 ch 2 ch 3 ch 4 ch (N-3) ch (N-2) ch (N-1) ch N Clock Reset Video Data valid Integration period ch 1 ch 2 ch 3 ch 1 ch 2 ch 3 Note: N is the number of pixels (N=256) KACCC0195EB Timing chart 2 (when used in combination with 512-pixel image sensor) Clock-odd Reset-odd Video-odd AD-TRIG-odd Clock-even Reset-even Video-even AD-TRIG-even Data valid 2 clocks 8 clocks 8 (N-1) clocks 17 clocks ch 1 ch 3 ch (N-3) ch (N-1) ch 2 ch 4 ch (N-2) ch N ch 1 ch 2 ch 3 ch 4 ch (N-3) ch (N-2) ch (N-1) ch N Clock-odd Reset-odd Video-odd AD-TRIG-odd Clock-even Reset-even Video-even AD-TRIG-even Data valid Integration period Note: N is the number of pixels (N=512) ch 1 ch 3 ch 2 ch 1 ch 2 ch 3 KACCC0196EC KACCC0196EC 6
Pin assignment of signal I/O connector 15-pin D-sub connector 8 7 6 5 4 3 2 1 15 14 13 12 11 10 9 KACCC0069EA Pin no. Terminal name Description 1 Cf SEL Digital input signal used to select conversion gain of charge amplifier in InGaAs image sensor. HCMOS compatible High level or left open: Low gain (0.3 V/pC) Low level: High gain (6 V/pC) 2 Data video* 5 Analog video output Positive polarity (Typ. 10 V) 3 VA1+ (+15 V) Analog power supply 4 VA1- (-15 V) Analog power supply 5 VD1 (+5 V) Digital power supply 6 Digital input signal for initializing the circuit HCMOS compatible. Positive logic 7 Digital input signal for operating the circuit HCMOS compatible Rising edge operation 8 Digital output signal for indicating end-of-scan of the image sensor HCMOS compatible Negative logic 9 A.GND Analog ground 10 A.GND Analog ground 11 NC No Connection 12 Digital ground 13 Digital ground 14 Digital ground 15 Digital output signal for A/D conversion HCMOS compatible Positive logic *5: Depending on the individual sensor to install, some channels might have a dark output lower than ground potential so use a bipolar A/D converter. 7
Pin assignment of TE-control connector 9-pin D-sub connector 5 4 3 2 1 9 8 7 6 KACCC0075EA Pin no. Terminal name Description 1 VD2* 6 Power supply 2 Temp Monitor Analog output signal of the temperature of the InGaAs image sensor 3 Cooling control Digital input signal for starting to cool down HCMOS compatible. H-level or left open: cooling L-level : stand-by 4 Vp* 6 Power supply for the thermoelectric cooler in the InGaAs image sensor 5 VF (+12 V) Power supply for cooling fan 6 Ground 7 Ground 8 P.GND Power supply return of the thermoelectric cooler mounted in the InGaAs image sensor 9 F.GND Ground return for cooling fan *6: : +5 V, C8062-01: +6 V Note: Available for using same power supply (+6 V) for VD2 and VP. Caution: Do not connect VD2 and VP together on the backside of the 9-sub D-sub connector. These may be connected (shorted) at the power supply end, not 9-pin D-sub connector. 8
Dimensional outline (unit: mm) 34.0 35.0 2.05 0.5 Focal plane 77.0 100.0 62.0 11.0 90.0 80.0 60.0 50.0 Focal plane 82.0 TE Control I/O Signal I/O 50.0 (4 ) M3 depth 4 KACCA0089EA C8062-01 75.4 65.0 2.25 0.5 34.0 Focal plane 100.0 90.0 80.0 60.0 50.0 Focal plane 88.4 81.0 TE Control I/O Signal I/O 50.0 (4 ) M3 depth 4 KACCA0090EA 9
Connection example TE controller Power supply VF (+12 V) F.GND VP * P.GND VD2 * Controller Cooling control 9 8 7 6 5 4 3 2 1 I/O signal Pulse generator Power supply Controller VD1 (+5 V) VA+ (+15 V) VA- (-15 V) A.GND Cf SEL 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 S/H or A/D Oscilloscope Analog input A.GND S/H input CH1 GND Ext.Trig GND * : +5 V, C8062-01: +6 V KA KACCC0197EB Related information www.hamamatsu.com/sp/ssd/doc_en.html Precautions Disclaimar 10
Multichannel detector head controller C7557-01 When connected to a HAMAMATSU multichannel detector head and a personal computer, the C7557-01 allows easy control of the detector head and data acquisition by using dedicated software that comes with the unit. Suitable multichannel detector head C7020/-02, C7021/-02, C7025/-02, C7040, C7041, C7043, C7044, C7180, C7181,, C8062-01, C10150, C10151, C5964 series, C8892 Accessories Spare fuse (2.5 A)* 7 AC cable 2 to 3 conversion adapter USB cable Detector head connection cables (for SIGNAL I/O and TE CONTROL I/O terminal of multichannel detector head) CD-R (MCD USB driver, software, operation manual) MOS adapter *7: Contained in the holder just above the AC cable connector on the C7557-01 rear panel. Connection example Shutter* timing pulse AC cable (100 to 240 V included with C7557-01) Trig. Dedicated cable (included with C7557-01) POWER SIGNAL I/O TE CONTROL I/O USB cable (included with C7557-01) Image sensor + Multichannel detector head C7557-01 PC (USB 2.0/3.0) [Windows 7 (32-bit, 64-bit)/ Windows 8 (64-bit)/ Windows 8.1 (64-bit)] * Shutter, etc. are not available. KACCC0402ED Information described in this material is current as of December 2017. Product specifications are subject to change without prior notice due to improvements or other reasons. This document has been carefully prepared and the information contained is believed to be accurate. In rare cases, however, there may be inaccuracies such as text errors. Before using these products, always contact us for the delivery specification sheet to check the latest specifications. The product warranty is valid for one year after delivery and is limited to product repair or replacement for defects discovered and reported to us within that one year period. However, even if within the warranty period we accept absolutely no liability for any loss caused by natural disasters or improper product use. Copying or reprinting the contents described in this material in whole or in part is prohibited without our prior permission. www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Solid State Division 1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, Bridgewater, N.J. 08807, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218, E-mail: usa@hamamatsu.com Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 8152-375-0, Fax: (49) 8152-265-8, E-mail: info@hamamatsu.de France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10, E-mail: infos@hamamatsu.fr United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777, E-mail: info@hamamatsu.co.uk North Europe: Hamamatsu Photonics Norden AB: Torshamnsgatan 35 16440 Kista, Sweden, Telephone: (46)8-509 031 00, Fax: (46)8-509 031 01, E-mail: info@hamamatsu.se Italy: Hamamatsu Photonics Italia S.r.l.: Strada della Moia, 1 int. 6, 20020 Arese (Milano), Italy, Telephone: (39)02-93 58 17 33, Fax: (39)02-93 58 17 41, E-mail: info@hamamatsu.it China: Hamamatsu Photonics (China) Co., Ltd.: B1201, Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: (86) 10-6586-6006, Fax: (86) 10-6586-2866, E-mail: hpc@hamamatsu.com.cn Taiwan: Hamamatsu Photonics Taiwan Co., Ltd.: 8F-3, No. 158, Section2, Gongdao 5th Road, East District, Hsinchu, 300, Taiwan R.O.C. Telephone: (886)03-659-0080, Fax: (886)03-659-0081, E-mail: info@hamamatsu.com.tw 11 Cat. No. KACC1089E11 Dec. 2017 DN