GENERAL CATALOGUE. Professional

Intelligent welding In car body repair GENERAL CATALOGUE Professional

CAR MANUFACTURERS ADVISING USING TECNA PRODUCTS 2

TECNA: Intelligent welding in car body repair This wide range is composed of: Hand-operated welding equipment for steel and aluminium studs (and pins) with capacitor discharge generators. Spotter with built-in transformer, 0.8kVA at 50%. Cable Spotter, 5 kva at 50%. Hand-operated spot guns (with built-in transformer), 2-6 kva at 50% Single-phase cable spot welders on trolley, 8 kva at 50% (which can be equipped with either manual or pneumatic guns, with either single or double program welding control unit). Single-phase cable spot welders on trolley, 10kVA at 50% (which can be equipped with water cooling, pneumatic guns, double program digital control unit). Rocker arm spot welders, foot and airoperated, 16-25 kva at 50%. Last generation inverter technology (low energy consumption) cable spot welders, 25 kva at 50%: equipped with built-in transformer guns (18 kva at 50%) and touch-screen welding control unit. Also, they can be equipped with either X or C pneumatic guns, exchangeable arms, water-cooled single-sided gun. Index Spotter 7600-7660 p. 4 Spotter 3464 p. 4 Spotter 3460N p. 5 TSW 1500 CAR p. 5 T-Spot 120 3541 p. 6 T-Spot 130 3542 p. 6 3481 3484 p. 7 3487/W p. 7 3450 p. 8 8095N p. 8 3650CF20 3655CF20 p. 9 3650ECF20 3655ECF20 p. 9 3664 3664P 3664P7 p. 10 8679T 8679TS 8679TS7 p. 10 X gun 8678T p. 11 Smart Plus p. 11 Accessories p. 12 Accessories p. 13 Selection of Arms, Electrodes and Accessories p. 14 Selection of Arms, Electrodes and Accessories p. 15 Selection of Arms, Electrodes and Accessories p. 16 Selection of Arms, Electrodes and Accessories p. 17 7018 7020 7034 7042 p. 18 Selection of Arms, Electrodes and Accessories p. 19 3406 3407 3408 p. 20 3410 3411 3415 p. 20 3416 3417 3418 p. 21 Selection of Arms, Electrodes and Accessories p. 21 Notes p. 22 Company profile p. 23 Tecna spot welders are approved and homologated by the best Car Manufacturers for being used in authorised car body shops. TECNA S.p.A. Specifications subject to change without notice 3

Spotter 7600-7660 Spotter 3464 SPOTTER 7600 and SPOTTER 7660 Cut the cost on body repairs, no need to remove interior trims and fitments, double skin areas easily repaired, shrinking attachment for difficult dents and pimples, fit trim studs in seconds. A rt. 7630K - 7690K Multifunction portable spotter 2500A. Extremely versatile equipment for the repairs in car body shops. The welding systems with built-in transformers are supplied complete with: micro-processor digital welding control unit with time adjustment in cycles (from 0,5 to 99) and welding current adjustment. The welding system is equipped with Auto-start mode which can be either enabled or disabled. Art. 7630PL - 7690PL Art. 7630CA - 7690CA Supplied with a multifunction gun with 2000 mm cable and a 2000 mm long earth cable. The mains cable is 4 m long. Standard equipment: Percussion extractor, kit of accessories and consumable material for straightening works in car-body shop. It is possible to perform shrinking with the carbon electrode. A quick straightening of panels is carried out thanks to the 3-point star on the percussion extractor. Improved versatility to allow the use of different accessories for sheet straightening. 7630CA - 7690CA Spotter with accessories in cardboard carrying case. 7630PL - 7690PL Spotter with accessories in plastic carrying case. 7630K - 7690K Spotter with accessories in stiff plastic carrying case. Item 7600-7660 Supply voltage 230 V Mains frequency 50 / 60 Hz Mains protection (delayed) 16 A Nominal power 50% ED 0,8 kva Maximum welding power 6 kva Maximum secondary voltage 2,25 ka No load secondary voltage 3 V *Weld time *65 cycles Protection rating 21 IP Weight 6 kg * Only on version item 7660 Item 3464 Supply voltage 230 V Mains frequency 50 / 60 Hz Mains protection (delayed) 16 A Nominal power 50% ED 2,5 kva Maximum welding power 18 kva Maximum secondary voltage 2,25 ka No load secondary voltage 9 V Weld time 0,5 99 cycles Protection rating 21 IP Weight 19 kg 4

Spotter 3460N TSW 1500 CAR Multifunction portable spotter 4500A. Extremely versatile equipment for the repairs in car body shops. Supplied with a multifunction gun with 1600 mm cable and a ground clamp with 1400 mm cable.the mains cable is 4 m long. Standard equipment: percussion extractor, Kit of accessories and consumable material for repairs in car-body shops. It allows to single-spot weld rivets, screws, self-threading rivets, washers and pins. It is possible to perform shrinking. A quick straightening of panels is carried out thanks to the 3-point star on the percussion extractor. Improved versatility to allow the use of different accessories for sheets straightening. The TSW 1500 CAR welding system runs with an extremely quick discharge (2-3 ms) of a capacitors bank that welds pins from Ø 2 3 mm to Ø 6 8 mm. This technology allows welding threaded studs, unthreaded pins, washers, fastons, etc. onto clean non-oxidized surfaces made out of mild steel, galvanized steel, stainless steel, aluminium or brass. The process quickness does not alter the surfaces on the side opposite the weld and in many cases it may be used with painted, pre-painted, plasticized and galvanized sheets. Item 3460N Supply voltage *400 V Mains frequency *50 / 60 Hz Mains protection (delayed) 16 A Nominal power 50% ED 5 kva Maximum welding power 20 kva Maximum secondary voltage 4,5 ka Thermal current 100% 0,63 ka No load secondary voltage 5,6 V Weld time 1 99 cycles Protection rating 21 IP Weight 28 kg Item TSW 1500 CAR Supply voltage 230 V Mains frequency 50/60 Hz Mains protection (delayed) 10 A Nominal power 1000 VA Nominal current 5 A Capacity 66 mf Welding programs 4 Protection rating 22 IP Weight 14 kg * Different voltages and frequencies on demand 5

T-Spot 120 3541 T-Spot 130 3542 3541 T-SPOT 120 double function combined welder for steel. The 3541 T-Spot 120 welder is a machine for repairing steel car bodies. It integrates two different functions in just one generator: steel spotter and twoside spot welding of non-structural sheets. Multifunction gun for sheet straightening, rivets welding and localised sheets heating with carbon electrode. A push-button remotely allows the programs' quick selection and a fine adjustment. The auto-start function allows to have the welding process automatically started when the tool gets in touch with the sheet. 3542 T-SPOT 130 triple function combined welder for steel and aluminium. The 3542 T-Spot 130 welder is a machine for repairing steel and aluminium car bodies. It integrates three different functions in just one generator: steel spotter, aluminium spotter and two-side spot welding of non-structural sheets. Multifunction gun for sheet straightening, rivets welding and localised sheets heating with carbon electrode. A push-button remotely allows the programs' quick selection and a fine adjustment. The auto-start function allows to have the welding process automatically started when the tool gets in touch with the sheet. Gun for capacitor discharge welding. Particularly on aluminium, the fast supply of very high current allows to arc weld suitable pins. Item 3541 T-Spot 120 Power supply 400 V Mains frequency 50/60 Hz Mains protection (delayed) 16 A Nominal power at 50% 5 kva Maximum short circuit current C type gun 4.5 ka Multifunction gun 2.9 ka Secondary no-load voltage C type gun 5.6 V Multifunction gun 8.3 V Item 3542 T-Spot 130 Power supply 400 V Mains frequency 50/60 Hz Mains protection (delayed) 16 A Nominal power at 50% 5 kva Maximum short circuit current C type gun 4.5 ka Multifunction gun 2.9 ka Secondary no-load voltage C type gun 5.6 V Multifunction gun 8.3 V CAPACITOR DISCHARGE WELDER Capacity 66 mf Adjustment field 40-210 V 6

3481 3484 3487/W Universal welding station 8 kva, hand-operated gun, double program. Simultaneous connection of two tools with automatic recall of the relevant welding program, enabling to save time, avoid errors so to have a simple and safe working process. Car body shop repair works: resistance spot welding of sheets, sheet straightening with spotter (nails and washers), localised sheets heating (carbon electrode), screws and rivets welding, inox sheet-metals spotting. The welding systems with built-in transformers are supplied equipped with: 2 Item 3473 - Extra-flexible cables L= 1800 mm, 150 mm, synchronous SCR welding control unit, time adjustment in cycles and pulses, welding current adjustment and stepping function. Universal welding station 8 kva, hand-operated gun, built-in watercooling group and double program. Simultaneous connection of two tools with automatic recall of the relevant welding program, enabling to save time, avoid errors so to have a simple and safe working process. Car body shop repair works: resistance spot welding of sheets, sheet straightening with spotter (nails and washers), localised sheets heating (carbon electrode), screws and rivets welding, inox sheet-metals spotting. The welding systems with built-in transformers are supplied equipped with: 2 Item 3473 - Extra-flexible cables L= 1800 mm, 150 mm, synchronous SCR welding control unit, time adjustment in cycles and pulses; welding current adjustment and stepping function. Item 3481 3484 Supply voltage *400 *400 V Mains frequency *50 / 60 *50 / 60 Hz Mains protection (delayed) 25 25 A Nominal power 50% ED 8 8 kva Maximum welding power 35 35 kva Maximum secondary voltage 6,4 6,4 ka Thermal current 100% 0,88 0,88 ka No load secondary voltage 7 7 V Weld time 1 99 1 99 cycles Protection rating 21 21 IP Weight 70 85 kg Art. 3487/W Supply voltage Mains frequency Mains protection (delayed) Nominal power 50% ED Maximum welding power Maximum secondary voltage Thermal current 100% No load secondary voltage Weld time Protection rating Weight *400 V *50 / 60 Hz 25 A 8 kva 35 kva 6,4 ka 0,88 ka 7 V 1 99 cycles 21 IP 105 kg * Different voltages and frequencies on demand * Different voltages and frequencies on demand 7

3450 8095N Universal welding station 10 kva, pneumatic gun. Upon request: watercooled arms, electrodes, cables with double program and simultaneous connection of two tools, with automatic recall of the relevant memorized welding program, enabling to save time, avoid errors so to have a simple and safe working process. Smart Gun, patented pneumatic gun with adjustable stroke. Car body shop repair works: resistance spot welding of sheets, sheet straightening with spotter (nails and washers), localised sheets heating (carbon electrode), screws and rivets welding, inox sheet-metals spotting. The welding stations with epoxy-coated transformers are supplied equipped with: synchronous digital welding control unit TE95, with double program, time adjustment in cycles and pulses, welding current adjustment and stepping function; Welding cables: Item 3873 - Extra-flexible (welding) 2 2 cables 150 mm, L = 2000 mm; Item 3452 - Water- cooled cables 150 mm, 2 L = 1800 mm; Item 3453 - Water- cooled cables 150 mm, L = 2000 mm; 2 Item 3454 - Water- cooled cables 150 mm, L = 2400 mm. Universal welding station 10 kva, pneumatic gun. Upon request: watercooled arms, electrodes, cables, with double program and simultaneous connection of two tools, with automatic recall of the relevant memorized welding program, enabling to save time, avoid errors so to have a simple and safe working process. Smart Gun, patented pneumatic gun with adjustable stroke. Car body shop repair works: resistance spot welding of sheets, sheet straightening with spotter (nails and washers), localised sheets heating (carbon electrode), screws and rivets welding, inox sheet-metals spotting. The welding stations with epoxy-coated transformers are supplied equipped with: synchronous digital welding control unit TE95, with double program, time adjustment in cycles and pulses, welding current adjustment and stepping function; Welding cables: Item 3873 - Extra-flexible (welding) 2 2 cables 150 mm, L = 2000 mm; Item 3452 - Water- cooled cables 150 mm, 2 L = 1800 mm - Item 3453 - Water- cooled cables 150 mm, L = 2000 mm; 2 Item 3454 - Water- cooled cables 150 mm, L = 2400 mm. Item 3450 Supply voltage *400 V Mains frequency *50 / 60 Hz Mains protection (delayed) 25 A Nominal power 50% ED 10 kva Maximum welding power 50 kva Maximum secondary voltage 8 ka Thermal current 100% 0,88 ka No load secondary voltage 8 V Weld time 1 99 cycles Protection rating 21 IP Weight 105 kg * Different voltages and frequencies on demand 8 Item 8095N Supply voltage *400 V Mains frequency *50 / 60 Hz Mains protection (delayed) 25 A Nominal power 50% ED 10 kva Maximum welding power 50 kva Maximum secondary voltage 8 ka Thermal current 100% 0,88 ka No load secondary voltage 8 V Weld time 1 99 cycles Protection rating 21 IP Weight 125 kg * Different voltages and frequencies on demand

3650CF20 3655CF20 Direct current welding station with inverter tecnology M.F. 25 kva. (1000 Hz), Water-cooled pneumatic double program. Simultaneous connection of two tools, with automatic recall of the relevant memorized welding program, enabling to save time, avoid errors so to have a simple and safe working process. Fast Gun, patented pneumatic gun with adjustable stroke. Car body shops repair works: spot welding with C gun, even for high strength steels both single-sided and twin spot; welding of nails and washers for sheet straightening (spotter function); localised heating with carbon electrode; sheet-metals spotting. By means of the inverter technology that allows a constant and high welding current, not influenced by the variations of the supply voltages and by the secondary circuit conditions, the quality of the spot is improved also on galvanized sheets. The high current value allows to save time resulting in a longer electrodes life. The reduced absorption balanced on the three phases reduces the connecting costs. The epoxy-coated welding transformer is water-cooled. Analog welding control unit and potentiometer, with two independent programs, time adjustment in cycles, pulses, welding current and compensation. 3650ECF20 3655ECF20 NE W CONTRO L UNIT NEW EVOLUTION direct current welding stations with inverter technology M.F. 25 kva. (1000 Hz) equipped with: - NEW TE40i inverter WELDING CONTROL UNIT provided with presettled main welding programs for high resistance materials too, time adjustment in ms, real welding current display, pulses, welding current and automatic compensation. - USB port for upgrading and welding data managing on PC. - Automatic proportional valve for managing the force at the electrodes. - Machine's NEW DESIGN. NEW TROLLEY equipped with protected wheels providing greater stability and ergonomics. The NEW EVOLUTION welding systems keep alive those features which made the TECNA welding systems versatile and reliable: - Independent double program; - Water-cooling; - Pneumatic functioning with simultaneous connection of two tools and automatic recall of the relevant memorized welding program enabling to save time, avoid errors so to have a simple and safe working process. The NEW EVOLUTION welding systems for car body repair are equipped with last generation's Smart Guns and Fast Guns, pneumatic guns providing maximum pressures from 320 dan up to 450 dan Item Supply voltage Mains frequency Mains protection (delayed) Nominal power 50% ED Maximum welding power Maximum secondary voltage Thermal current 100% No load secondary voltage Weld time Protection rating Weight 3650CF20 3655CF20 *400 *400 V *50 / 60 *50 / 60 Hz 35 40 A 25 25 kva 125 -- kva 9 12 ka 1,25 1,25 ka 14 15 V 1 65 1 65 cycles 21 21 IP 150 150 kg Item 3650ECF20 3655ECF20 Supply voltage *400 *400 V Mains frequency *50 / 60 *50 / 60 Hz Mains protection (delayed) 35 40 A Nominal power 50% ED 25 25 kva Maximum welding power 125 -- kva Maximum secondary voltage 9 12 ka Thermal current 100% 1,25 1,25 ka No load secondary voltage 14 15 V Weld time 0,01 2 0,01 2 s Protection rating 21 21 IP Weight 150 150 kg * Different voltages and frequencies on demand * Different voltages and frequencies on demand 9

3664 3664P 3664P7 8679T 8679TS 8679TS7 Item 8679TS7 for SMART PLUS mode Item 8679TS for SMART PLUS mode Item 8679T Resistance spot welding system, controlled by a microprocessor, designed for car body repair shops. The welding control unit with digital touch-screen enables to display and check all the welding parameters according to the type of tool, the type and thickness of the sheets to be welded. 10 The welder's main features are: system that automatically acknowledges the tool connected to the machine; Welding tool equipped with built-in transformer that is connected to the machine by means of an industrial plug and quick connection devices. Thus, it is possible to easily change the tool avoiding the use of keys, tools and screws; fully water-cooled welding tool, transformer, arms and electrodes, by means of a closed circuit cooling system placed on the trolley of the machine. Item 3664 3664P 3664P7 Supply voltage Mains frequency Mains protection (delayed) Protection rating Weight *400 V *50 / 60 Hz 25-32 A 21 IP 130 * Different voltages and frequencies on demand Item 8679T 8679TS 8679TS7 Nominal power 50% ED 12 12 12 kva Maximum welding power 17 17 17 kva Maximum secondary voltage 14 14 14 ka Thermal current 100% No load secondary voltage Max. electrode force 1,8 1,8 1,8 ka 8,7 8,7 8,7 V 450 450 700 dan Recognition sensor -- S S Protection rating 21 21 21 IP Weight 12,5 12,5 12,5 kg S = Smart Plus * Different voltages and frequencies on demand

X gun 8678T Smart Plus Smart Plus Mode automatic welding system (pending patent) Car Manufacturers parameters with display of the parts to be welded Extra stroke Item 8678T Nominal power 50% ED 12 kva Maximum welding power 17 kva Maximum secondary voltage 14 ka Thermal current 100% 1,8 ka No load secondary voltage 6,8 V Max. electrode force arms L 120mm 610 dan Protection rating 21 IP Weight 13 kg Graphic display of the welding parameters * Different voltages and frequencies on demand 11

Accessories 3491 3460N 3481/3484 3487/W 3450 3650/3655 Accessories 8677 22 max 240 dan at 8 bar with 5127 20 max 190 dan at 8 bar with 5121 3460N 3481/3484 3487/W 3450 3650/3655 Hand-operated gun with air cooling. Standard and large gap arms item 5001 5085. 3696 Water-cooled pneumatic gun. Standard and large gap arms item 5127 5137. 3575 Art. 7638 Art. 7636 Hand-operated C type gun with air cooling. Reduced overall dimensions. Cables length 1600 mm. 8651 Multifunction gun for the welding of screws, pins, washers, rivets and single-spot. Star electrode for straightening. Percussion extractor. 8659 Air and water cooled twin spot gun. 8075 ART. 7638 ART. 7636 Water-cooled pneumatic C - Type gun. Multifunction gun for the welding of screws, pins, washers, rivets and single-spot. Star electrode for straightening. Percussion extractor. 8669 8658 Water-cooled pneumatic C - Type gun. 8675 Water-cooled pneumatic C - Type Gun. 8672/S1 20 max 150 dan at 8 bar with 5021 18 max 150 dan at 8 bar with 5121 Water-cooling group with pneumatic pump. 8675/S Smart gun: pneumatic gun with air and water cooling. Standard and large gap arms item 5001 5085 and item 5121 5185. Water-cooling group with electric pump. 8676 20 max 190 dan at 8 bar with 5121 8675/SP Smart gun: pneumatic gun with air and water cooling. Standard and large gap arms item 5001 5085 and item 5121 5185. 12 Water-cooling group with electric pump. Standard equipment / Upon request / Not available

Accessories Accessories Water cooled cables L=2400 mm, 2 150 mm section, for L-C type guns. 23221 3454-5 3456-7 7694 7695 Buttonholed washers. Twisted buttonholed washers. 7693 7696 Electrode for buttonholed and twisted buttonholed washers. Universal fast ground. 7684 7686 Rings for screws. Threaded pins 7691 7698 Aluminium hammer - 450 g Aluminium hammer - 120 g 7699 7697 Aluminium hammer - 120 g Aluminium hammer - 80 g Water cooled cables L=3000 mm, 2 150 mm section, for L-C type guns. 7682 7683 72133 7692 Universal multifunction pulling bar with Revolving. Pull system. Pressure multiplier 88188 88002 Gun for capacitor discharge welding. Ground cable with two guns. 88189 3461T Gun for capacitor discharge welding. T-Roller. Universal multifunction pulling bar. Pendrive. 13

Selection of Arms, Electrodes and Accessories Ø 18 mm - Air-cooled L=107 mm item 5021 L=152 mm item 5022 L=235 mm item 5023 L=330 mm item 5024 L=480 mm item 5025 L=107 mm item 5081 L=107 mm item 5082 L=230 mm item 5084 L=107 mm item 5001 L=235 mm item 5003 L=332 mm item 5004 L=483 mm item 5005 L=152 mm item 5032 L=235 mm item 5033 L=330 mm item 5034 L=480 mm item 5035 L=330 mm item 5085 Item 7351 Item 5201/C Item 5202/C Item 5203/C Item 5204/C Set of 20 pieces Ø 20 mm - Water-cooled L=107 mm Item 5121 L=152 mm Item 5122 L=332 mm Item 5124 L=483 mm Item 5125 L=350 mm Item 5134 L=550 mm Item 5136 L=350 mm Item 5183 L=350 mm Item 5185 L=250 mm Item 5186 Item 5210/C Item 5211/C Item 5212/CItem 5213/CItem 5218/C L=107 mm Item 5182 L=107 mm Item 5181 L=250 mm Item 5184 L=335 mm Item 5188 Ø 22 mm - Water-cooled Item 5214/C Item 5215 Item 5216 Item 7335 Set of 12 pieces L=152 mm Item 5127 L=232 mm Item 5128 L=332 mm Item 5129 L=483 mm Item 5130 L=350 mm Item 5137 L=250 mm Item 5187 L=107 mm Item 5192 L=107 mm Item 5191 7610 7611 7666 7667 7668 7670 7672 7636 Item 7639 7673 7674 7675 7614 7676 7654 7645 7646 7647 7648 7649 7650 7656 15 13 14

355 635 205 85 5 0 5 Selection of Arms, Electrodes and Accessories Electrodes Item 8659 Item 5224-Ø13 Item 5228-Ø16 Item 5225-Ø13 Item 5229-Ø16 Item 5230-Ø16 Accessories Item 8659 Ø 13 Item 5208/C 5201/C 5202/C 5203/C Electrodes Item 8669 Item 5224-Ø13 Item 5228-Ø16 Item 5225-Ø13 Item 5229-Ø16 Item 5230-Ø16 Item 8688-8688/W - 8688/W/S Item 5226-Ø13 Item 5226/W-Ø13 Item 5227/W-Ø16 Accessories Item 8669 Ø 16 Item 5233 5231 5232 5234 225 Item 8685-8685/W - 8685/W/S Item 5226-Ø13 Item 5226/W-Ø13 Item 5227/W-Ø16 160 Standard for item 8659 Standard for item 8669 Item 8684-8684/W - 8684/W/S Item 5226-Ø13 Item 5226/W-Ø13 Item 5227/W-Ø16 Standard for item 8659 Standard for item 8669 Item 8687-8687/W - 8687/W/S Item 5226-Ø13 Item 5226/W-Ø13 Item 5227/W-Ø16 160 Standard for item 8659 Standard for item 8669 Item 8686-8686/W - 8686/W/S Item 5226-Ø13 Item 5226/W-Ø13 Item 5227/W-Ø16 225 160 Standard for item 8659 Standard for item 8669 Standard for item 8659 Standard for item 8669 15

82 1 0 8 305 Selection of Arms, Electrodes and Accessories Item 8690/W/S Item 5222-Ø13 Item 5222/W-Ø13 Item 5223/W-Ø16 500 225 Standard Upon request Item 5220 Item 5220/W Item 5225-Ø13 Item 5229-Ø16 Item 5239/W Item 5230-Ø16 Standard Upon request 160 Standard Upon request 160 Item 5221/2 Item 5221/1 Item 5238/W Item 5230-Ø16 Item 5237/W Standard Upon request 160 Standard Upon request 160 Item 8689 Item 5220 Item 5224-Ø13 Item 5228-Ø16 Item 5221/2 Item 5220 Item 5221/1 Standard Upon request OPTIONAL for 5221/2 5210/C 5211/C 5212/C 5214/C 5218/C 16 The accessories upon demand item 8689-5220-5221/1-5221/2 can be used at max 6 bar only

Selection of Arms, Electrodes and Accessories For Item 8678T Ø28 G=100 Ø28 L 40 130 L = 120 mm Item 5260 L = 155 mm Item 5261 L = 255 mm Item 5262 L = 355 mm Item 5263 L = 505 mm Item 5264 Ø28 G=100 50 Ø28 L L = 250 mm Item 5268 L = 350 mm Item 5269 L = 505 mm Item 5270 Item 5233 Item 5231 Item 5232 Item 5234 Ø28 Ø28 G=102 L L = 275 mm Item 5271 56 Item 30033 17

7018 7020 7034 7042 Item 7018 HAND-OPERATED SPOT GUN - 2kVA - Portable spot gun for maintenance and light production work without timer. - Power at 50% 2kVA. - Short circuit current 7.2 ka. - Maximum simplicity and minimum cost. - The welding time is controlled by the operator by varying the duration of the pressure on the control lever. - Handles in maximum balance position. - Threaded base for fixing on a bench. - Additional lower armholder coupling to provide large gap between arms. - The opening of the electrodes is increased by operating the same lever by which the working stroke is obtained. Item 7034 WATER COOLED SPOT GUN - 6kVA - Portable water-cooled spot gun to be used with arms item 7512-7513 - 7514-7515 supplied on request. - For heavy duty works in car body repair. - For light production works in industry. - Power at 50% 6kVA. - Short circuit current 8.2 ka. - Synchronous built-in electronic timer with SCR from 0,05 to 1,25. - The compensation circuit starts the timer only when there is a proper passage of current, which enables to perform welding on oxidised sheets or surfaces with paint residues. - Threaded base for fixing on a bench. - Additional lower armholder coupling to provide large gap between arms. - The opening of the electrodes is increased by operating the same lever by which the working stroke is obtained. Item 7020 HAND-OPERATED SPOT GUN - 2kVA - Light and improved spot gun for car body repair. - Power at 50% 2kVA. - Short circuit current 7.2 ka. - Synchronous built-in electronic timer with SCR from 0,05 to 1,25. - The compensation circuit starts the timer only when there is a proper passage of current, which enables to perform welding on oxidised sheets or surfaces with paint residues. - Handles in maximum balance position. - Threaded base for fixing on a bench. - Additional lower armholder coupling to provide large gap between arms. - The opening of the electrodes is increased by operating the same lever by which the working stroke is obtained. Item 7042 HAND-OPERATED SPOT GUN - 2.5kVA - Spot gun for car body repair, maintenance and light production work. - Power at 50% 2.5kVA. - Short circuit current 8.2 ka. - Synchronous built-in electronic timer with SCR from 0,05 to 1,25. - The compensation circuit starts the timer only when there is a proper passage of current, which enables to perform welding on oxidised sheets or surfaces with paint residues. - Handles in maximum balance position. - Threaded base for fixing on a bench. - Additional lower armholder coupling to provide large gap between arms. - The opening of the electrodes is increased by operating the same lever by which the working stroke is obtained. Item 7018 7020 7034 7042 Supply voltage *400 *400 *400 *400 V Mains frequency *50 / 60 *50 / 60 *50 / 60 *50 / 60 Hz Mains protection (delayed) 16 16 16 16 A Nominal power 50% ED 2 2 6 2,5 kva Maximum welding power 13 13 16 16 kva Maximum secondary voltage 7,2 7,2 8,2 8,2 ka Thermal current 100% 0,61 0,61 1,7 0,7 ka No load secondary voltage 2,3 2,3 2,5 2,5 V Weld time 1 1 65 1 65 1 65 cycles Protection rating 21 21 21 21 IP Weight 11 10 11 11 kg 18 * Different voltages and frequencies on demand

Selection of Arms, Electrodes and Accessories Item 7521 L=125 mm Item 7501 L=250 mm Item 7502 L=350 mm Item 7503 L=500 mm Item 7504 Item 7524 L=500 mm Item 7509 Item 7523 Item 7523 L=125 mm Item 7511 L=250 mm Item 7506 Item 7523 Item 7533 Item 7522 Item 7526 L=350 mm Item 7507 Item 7516 Item 7510 Item 3830 L=125 mm Item 7401 L=250 mm Item 7402 L=350 mm Item 7403 L=500 mm Item 7404 L=650 mm Item 7405 Item 7421 Item 7452 L=350 mm Item 7406 L=500 mm Item 7407 Item 7454 Item 7453 L=150 mm Item 7512 L=250 mm Item 7513 L=350 mm Item 7514 L=500 mm Item 7515 Arms and electrodes for item 7042 Arms and electrodes for item 7034 - suitable to all other models too Item 5211/2 Item 5212/2 Item 5214/2 Item 3833 Item 3835 Item 9356 9357 Item 7551 19

3406 3407 3408 3410 3411 3415 Rocker arm foot-operated spot welder with electronic welding control unit TE25. Arms adjustable in length according to the job to be carried out. Chrome-copper electrode holders for long life and heavy duty service, designed for straight and angled fitting. Epoxy coated, water-cooled transformer. Protection thermostat. Watercooled arms, electrode holders and electrodes. Synchronous SCR contactor insulated from cooling water circuit. Adjustable electrode stroke. Foot control adjustable in length. Adjustable electrode pressure; a microswitch starts the welding cycle when the desired pre-set value is reached. Air operated rocker arm spot welder with electronic welding control unit TE25. Arms adjustable in length according to the job to be carried out. Chromecopper electrode holders for long life and heavy duty service, designed for straight and angled fitting. Adjustable electrode stroke to have the maximum working rate. Pneumatic foot-switch which activates directly the electrodes. Epoxy coated, water-cooled transformer. Protection thermostat. Watercooled arms, electrode holders and electrodes. Synchronous SCR contactor insulated from cooling water circuit. Electrode force adjustment with air filter reducer with gauge, placed inside the welder in a protected position, with semi-automatic drainage system. Item 3406 3407 3408 Supply voltage Mains frequency Mains protection (delayed) Nominal power 50% ED Maximum welding power Maximum secondary voltage Thermal current 100% No load secondary voltage Weld time Protection rating *400 *50 / 60 32 16 32 9,4 3,3 3,4 1 65 21 *400 *50 / 60 40 20 44 11,2 3,5 4 1 65 21 *400 V *50 / 60 Hz 50 A 25 kva 62 kva 13,2 ka 3,8 ka 4,6 V 1 65 cycles 21 IP Weight 110 115 123 kg Item 3410 3411 3415 Supply voltage *400 *400 *400 V Mains frequency *50 / 60 *50 / 60 *50 / 60 Hz Mains protection (delayed) 32 40 50 A Nominal power 50% ED 16 20 25 kva Maximum welding power 32 44 62 kva Maximum secondary voltage 9,4 11,2 13,2 ka Thermal current 100% 3,3 3,5 3,8 ka No load secondary voltage 3,4 4 4,6 V Weld time 1 65 1 65 1 65 cycles Protection rating 21 21 21 IP Weight 105 110 118 kg 20 * Different voltages and frequencies on demand * Different voltages and frequencies on demand

3416 3417 3418 Selection of Arms, Electrodes and Accessories 3436 Additional foot control for program no. 2 3444 Brass arm without electrode-holder D=36 mm L=380 700 mm (Item 3407-3411-3417) Air operated rocker arm welding machine with microprocessor welding control unit TE90. Arms adjustable in length according to the job to be carried out. Chrome-copper electrode holders for long life and heavy duty service, designed for straight and angled fitting. Adjustable electrode stroke to have the maximum working rate. Epoxy coated water-cooled transformer. Water-cooled arms, electrode holders and electrodes. Synchronous SCR contactor insulated from cooling water circuit and protection thermostat. Two-stage electric foot switch, that besides its normal use in automatic and single spot mode, allows the operator to bring the pieces together and to weld them only when correctly positioned. Pre-arrangement for the connection of a second electric two-stage foot switch item 70284. The addition of the second foot switch allows to recall two different adjustments of time and current, required when different kinds of welding are to be performed on the same piece. Single and automatic repeat modes. 3445 Brass arm without electrode-holder D=40 mm L=380 700 mm (Item 3408-3415-3418) 3446-3447 Reduced size brass arm. D=36 mm - L=380 700 mm - ø62 mm (Item 3446 for 16-20 kva) D=40 mm - L=380 700 mm - ø70 mm (Item 3447 for 25 kva) 3448-3449 Item 3416 3417 3418 Supply voltage *400 *400 *400 V Mains frequency *50 / 60 *50 / 60 *50 / 60 Hz Mains protection (delayed) 32 40 50 A Nominal power 50% ED 16 20 25 kva Maximum welding power 32 44 62 kva Maximum secondary voltage 9,4 11,2 13,2 ka Thermal current 100% 3,3 3,5 3,8 ka No load secondary voltage 3,4 4 4,6 V Weld time 1 99 1 99 1 99 cycles Protection rating 21 21 21 IP Weight 112 117 125 kg * Different voltages and frequencies on demand Reduced size brass arm. D=36 mm - L=380 700 mm - ø48 mm (Item 3448 for 16-20 kva) D=40 mm - L=380 700 mm - ø48 mm (Item 3449 for 25 kva) 3566-3567 - 3569 Item 3566 Item 3569 Item 3567 Item. 3566 Electrode-holder with ring nut, couplings and electrode item 3567 Item 3567 Offset electrode for item 3566 Item 3569 Straight electrode for item 3566 21

22 Notes:

SPOT WELDERS FOR CAR BODY REPAIR TECNA has been designing and producing resistance spot welders and balancers for more than 30 years. This wide experience in the industrial field qualifies Tecna as a supplier for important car manufacturers and big multinational groups. PRODUCTS The wide productive range of TECNA's goes from the resistance welding machines for industrial use with single-phase, three-phase inverter, three-phase D.C. and capacitors discharge technologies, to the machines for car body repair shops and passes through the control units, the transformers, the measurement instruments, as far as a very professional range of balancers. The experience acquired in the industrial field, as a supplier of very important car manufacturers, the broad know-how, a very high vertical organization of the production process and, particularly, an extreme specialization in the field of resistance welding have permitted important innovations and a huge range of products. BALANCERS INDUSTRIAL RESISTANCE WELDERS TECNA IN THE WORLD A constant company growth obtained by means of a very high level of its products quality and its continuous technological improvement allow TECNA to be present in every continent and to be acknowledged as an important actor in this particular product field. Basically, a commercial network of distributors and agents covers the market worldwide.

F.S. Via Emilia Modena F.S. Genova Milano Venezia Bologna Roma MILANO PIACENZA Napoli Taranto A1 MODENA BOLOGNA B. Panigale AIRPORT AEROPORTO A13 VENEZIA PADOVA FERRARA BOLOGNA Arcoveggio BOLOGNA Fiera BOLOGNA Casalecchio STAZIONE RAILWAY STATION N A1 FIRENZE ROMA NAPOLI BOLOGNA S. Lazzaro CASTEL S. PIETRO TERME CASTEL S. PIETRO TERME IMOLA Via Emi lia Rimini TECNA S.p.A. - Via Grieco, 25/27-40024 Castel San Pietro Terme - Bologna (Italy) - Pho. +39.051.6954400 - Tel. 051.6954410 - Fax +39.051.6954490 http://www.tecna.net - E-mail:sales@tecna.net - vendite@tecna.net A14 RIMINI ANCONA BARI 500-06/2010 - DP0002GB - TECNA SpA - Castel San Pietro Terme - tipografia F.lli Cava srl