Robert Burén Product Manager 10G Solutions Nexans Cabling Solutions 1
10 Gigabit Ethernet.Performance 30 GByte can be transmitted within 24 seconds Example: MRI-scan size is 30GB as average A memory device of 2 TByte capacity can be loaded within 27 minutes Over 156 000 ISDN-telephone calls can be transmitted over just one connection at individual speed of 64 kbit per second each 2
Pre-Terminated Fibre Assemblies 3
Applications Pre-Terminated Fibre Premise (LAN) Inter & Intra-building backbones Horizontal cabling 1 to 10 Gb/s Ethernet Data Center (SAN) Main, Horizontal, Zone and Equipment Distribution Areas 1 to 10 Gb/s Fibre Channel 4
Applications Pre-Terminated Fibre 2.0mm or 900µ fanout enable: Active to Panel Active to Active Panel to Panel Multi-patching 5
Product overview Pre-Terminated Fibre Grommet Pulling eye Protection tube Fanout legs 6
Product details Pre-Terminated Fibre High quality LANmark-OF cables: SM 62,5 50µ OM3 Tight-buffer construction Range of cores: 6-12-24 Any cable length available 1m step Max Lengths: 6cores: 630m 12 cores: 540m 24 cores: 380m High performing connectors: LC, SC, MTRJ, ST, Fanout leg size: 2.0mm or 900µ 7
Link loss improved Pre-Terminated Fibre Better connector performances # of connections wthin the link higher number of connections within the link Standard 10Gbase SR LANmark-OF Pre-term 2 300m 340m 4 N/A 320m 6 N/A 280m 8 N/A 260m 10 N/A 200m Values for 50µm Multimode Fibre with 2000MHz.KM Bandwidth Up to 13 connections over 100m Cutting edge advantage for Data centres/san s 8
Fibre SAN s Today fibre is most common solution for SAN s High bandwidth multimode fibre meets capacity Small Form Factor (SFF) connectors improve density Nexans has complete fibre solution LANmark-OF3/OF3xt cables SFF snap-in couplers Modular panels Accessories 9
Why develop 10 Gig Copper? Fibre is best for long distance / few terminations e.g. backbone links SAN s tend to be short links / many terminations Fibre is relatively high cost Copper expected to be only 40% cost of fibre 10
10 Gigabit over Twisted Pair 11
A-XT of good Cat.6a A-XT Measurements of one of best Cat.6a solutions A-NEXT of augmented UTP 40 PSANEXT UTP Blue 50 PSANEXT UTP Orange PSANEXT UTP Green 60 PSANEXT UTP Brown IEEE Limit 70 Cat6a Limit 80 90 100 110 Requires Field Testing and Verification On Site 1 10 100 1000 12
Example of High Density Copper Horizontal Links to the Backbone 13
Installation issues in risers 14
NCS 10G Solutions Additional requirements Class F Class E screened Class E UTP Extended freq to 500MHz LANmark-7 LANmark-6 10G TBD Not risk free today LANmark-6A Alien crosstalk Not risk free today Nexans launches 2 new RJ45 based solutions for 10G (now 3 in total) All components fully specified and manufactured up to 500MHz No risk from AXT / No need for A-XT Field testing No UTP solution yet due to field testing issues 15
NCS 10G Solutions Why 3 solutions? LANmark philosophy is to deliver the benefits of choice to customers and not follow One solution fits all Best fit to customer needs Offer all major important technologies Application requirements and standard development are not always in sync Cabling standards shall be application independant 16
NCS 10G Solutions Solution Purpose Focus LANmark-6 10G Application driven solution, exceeds all application requirements specified in IEEE802.3an, TSB155, ISO TR24750 10G LANmark-6A Additionally compliant with next generation cabling drafts Cat 6A TIA568B.2-1ad.10 ISO 11801 2002 am 1.1 Class Ea Standard Compliance LANmark-7 2 in 1 Forwards compatible to next interface Cat 6A with future upgrade potential to Cat 7 using GG45 cords Highest Bandwidth / Future Safety 17
NCS 10G Solutions 3 different performance levels All guarantee 10G support All guarantee >10dB margin on most critical parameter A-XT Fieldtestingobsolete Guaranteed Channel Margin against IEEE, TIA, ISO 10GBase-T Standards LAN mark 6A LAN mark-6 10G LAN mark-7 / RJ45 LAN mark-7 / GG45 Insertion Loss min 1.5% min 2.5 % min 2.5% NEXT 3 3.5 22 PSNEXT 4.5 4.5 23.5 ELFEXT 6 7 15 PSELFEXT 9 10 15 Return Loss 2 2 2.5 PSANEXT 15 15 / 20 20 PSAELFEXT 10 10 / 15 15 18
LANmark-6 10G 19
10G Cable LANmark-6 10G F 1 TP Designed for 10G Guaranted performance to 500MHz Screened - No Alien Crosstalk issues F/UTP Design C3 Central Strength Element to secure pair position Easy to install 1 Foil (not 5) Optimised insulation technology allows smaller conductor for improved handling Small OD : 7.1mm Fast termination (Aluminium foil side outwards looking) 20
10G Connector Designed for 10G 500 MHz performance Screened - No AXT issues LANmark-6 10G EVO Connector screened Same mechanical features as the top selling Cat.6 product Shorter Faster Easier to install Re-usable Snap In Format: Wide range of modular panels and outlet available Special Version for stranded wires available 21
Screening LANmark Panels automatically install screening contact and earth 2 sided Clip On wings Clip On for Connector: Front part Clip On for Cable: Second row combined with strain relief 22
10G Patchcords Designed for 10G 500 MHz performance Screened - No AXT issues Patented plug technology Standard lengths 10m single end version for Consolidation Points and Cross Connects LANmark-6 10G Ultim patchcords 23
LANmark-6 10G Performance NEXT LANmark-6 10G Channel NEXT 120 100 NEXT (in db) 80 60 40 NEXT 1,2-3 NEXT 1,2-4 NEXT 1,2-7 NEXT 3,6-4 NEXT 3,6-7 NEXT 4,5-7 NEXT Limit 20 0 0 50 100 150 200 250 300 350 400 450 500 Freq (in MHz) *4 Connector Channel Configuration of maximum length 24
LANmark-6 10G Performance ACR LANmark-6 10G 4 C Channel IL and NEXT 120 Next (in db)) 100 80 60 40 IL 1,2 IL 3,6 IL 4,5 IL 7,8 NEXT 1,2-3,6 NEXT 1,2-4,5 NEXT 1,2-7,8 NEXT 3,6-4,5 NEXT 3,6-7,8 NEXT 4,5-7,8 IL Limit IEEE802.3a NEXT Limit 20 0 0 50 100 150 200 250 300 350 400 450 500 Freq in MHz 25
Performance ELFEXT LANmark-6 10G LANmark-6 10G Channel ELFEXT 120 100 ELFEXT (in db) 80 60 40 1,2-3, 1,2-4, 1,2-7, 3,6-1, 3,6-4, 3,6-7, 4,5-1, 4,5-3, 4,5-7, 7,8-1, 7,8-3, 7,8-4, Guar 20 0 0 50 100 150 200 250 300 350 400 450 500 Freq (in db) *4 Connector Channel Configuration of maximum length 26
Performance A-XT LANmark-6 10G LANmark-6 10G PSANEXT 8a1 Channel 40 PSANEXT FTP Blue 50 PSANEXT FTP Orange PSANEXT FTP Green 60 PSANEXT FTP Brown 70 IEEE Limit 80 90 100 110 50 100 150 200 250 300 350 400 450 LANmark-6 10G PSELFEXT 8a1 Channel 0 PSAELFEXT FTP Blue PSAELFEXT FTP Orange 20 PSAELFEXT FTP Green PSAELFEXT FTP Brown 40 IEEE PS AELFEXT 60 80 100 50 100 150 200 250 300 350 400 450 5 27
Summary LANmark-6 10G Complete solution Designed to meet 10G requirements with headroom Zero risk of AXT problems All components tested up to 500 Mhz Easy to handle and install 25 years warranty : meets IEEE802.3an No mitigation techniques required No A-XT measurement protocolls required Most cost effective solution LANsense compatible 28
LANmark-6A 29
LANmark 6A Cable Designed for 10G and Cat6A compliance Guaranted performance to 500MHz Screened - No Alien Crosstalk issues Extra Headroom for attenuation build in Higher ACR than required in standards LANmark-6A F/UTP F/UTP Design C3 Central Strength Element to secure pair position Easy to install 1 Foil (not 5) Small OD : 7.1mm 30
LANmark 6A Connector Designed for 10G and Cat6A / Class EA compliance 500 MHz performance Screened - No AXT issues Additional NEXT Headroom build in LANmark-6A Connector screened Snap In Format: Wide range of modular panels and outlet available Same mechanical features as the GG45 Excellent screening Robustness of Metal Housing Patented Cat6 compensation technique Easy and reliable cable termination 31
LANmark 6A Channel Performance Channel Performance exceeds Cat.6A Excellent electrical performance in high frequency range Designed for 10G and more Guaranteed Channel Margin against TIA Augmented Cat 6 (CAT6A) LAN mark 6A LAN mark-7 / RJ45 LAN mark-7 / GG45 Insertion Loss min 1.5% min 1.5% NEXT 2 20 PSNEXT 3.5 23.5 ELFEXT 6.5 13 PSELFEXT 10.5 13 Return Loss 2.5 2.5 PSANEXT 15 20 PSAELFEXT 10 15 32
LANmark-7 33
LANmark-7 A no brainer re performance: Cat 6a, Cat 7 & Cat 7a compliant Exceeds all requirements by far : Cable & Connector, Channel, Alien Crosstalk Available Guaranteed to support final application Forwards Compatible because 2 in 1 Standardised new interface included: GG45 is the only RJ45 compatible connector standardised beyond 250/500MHz Cat 6a modus RJ45 modus is Cat6a compliant 15 db guaranteed headroom on Alien Crosstalk Cat 7(a) modus 20 db guaranteed headroom on Alien Crosstalk Smaller - patching 34
LANmark-7 Performance A-XT LANmark-7 PSANEXT 8a1 Channel 40 LM7 Blue 50 LM7 Orange LM7 Green 60 LM7 Brown 70 IEEE Limit 80 90 100 LANmark-7 PSAELFEXT 8a1 Channel 110 50 100 150 200 250 300 350 400 450 0 LM7 Blue LM7 Orange 20 LM7 Green LM7 Brown 40 IEEE PS AELFEXT 60 80 100 50 100 150 200 250 300 350 400 450 35
36