Data sheet: Wilo-Drain TP 65 E 114/11 (1~230 V) Pump curves Wilo-Drain TP 65 E - 50 Hz - No. of poles: 2 Unit Max. delivery head H max 15.0 m Max. volume flow Q max 52.0 m 3 /h Optimal delivery head H opt 8.0 m Optimum volume flow Q opt 28.0 m 3 /h Pressure connection DN 65 Pump curves in accordance with ISO 9906, Appendix A Flanges (according to EN 1092-2) PN 10 Maximum operating pressure p max 2 bar Free ball passage Operating mode (immersed) Operating mode (non-immersed) Max. immersion depth 44 mm S1 S2-8 min S3-25% 10 m Protection class IP 68 Fluid temperature T +3... +35 C Weight approx. m 24.0 kg Motor data Mains connection 1~230 V, 50 Hz Rated current I N 7.2 A Nominal motor power P 2 1.1 kw Power consumption P 1 1.5 kw Power factor Activation type cos φ 0.99 Direct Nominal speed n 2850 rpm No. of poles 2 Insulation class F Recommended switching frequency 20 1/h Max. switching frequency 40 1/h Permitted voltage tolerance ±10 % Cable Length of connecting cable Cable type 10 m OZOFLEX (PLUS) 07RNF Cable cross-section 4G1 mm 2 Type of connecting cable Mains plug Detachable Equipment/function Float switch Subject to change without prior notice. www.wilo.co.uk 50 Hz 2015-02 1 / 8
Data sheet: Wilo-Drain TP 65 E 114/11 (1~230 V) Motor protection WSK Explosion protection Materials Static seal Impeller Sealing on motor side Mechanical seal NBR PUR NBR SiC/SiC Motor housing 1.4301 Pump housing Pump shaft PUR 1.4404 [AISI316L] Information for order placements Make Wilo Art no. 4007101 EAN number 4016322308485 Price group PG7 Subject to change without prior notice. www.wilo.co.uk 50 Hz 2015-02 2 / 8
Dimensions and dimension drawings: Wilo-Drain TP 65 E 114/11 (1~230 V) Dimension drawing Wilo-Drain TP 65 (1~230 V/1.1 kw) - stationary wet well installation Ø 26.9x2.0 > 325 148 54 170 200 145 DN65 Ø19 Ø 145 308 405 DN 65 PN 10/16 532 4 x M16 300 160 >85 65 93 238 Ø 320 Ø 300 32 Subject to change without prior notice. www.wilo.co.uk 50 Hz 2015-02 3 / 8
Dimensions and dimension drawings: Wilo-Drain TP 65 E 114/11 (1~230 V) Dimension drawing Wilo-Drain TP 65 (1~230 V/1.1 kw) - portable wet well installation Ø 145 150 80 DN 65 PN 10/16 170 532 4 x M16 120 115 193 PG 13 PG 11 PG 13 Ø 320 Ø 300 Subject to change without prior notice. www.wilo.co.uk 50 Hz 2015-02 4 / 8
Pump curves: Wilo-Drain TP 65 E 114/11 (1~230 V) Pump curves Wilo-Drain TP 65 E - 50 Hz - No. of poles: 2 Pump curves in accordance with ISO 9906, Appendix A Subject to change without prior notice. www.wilo.co.uk 50 Hz 2015-02 5 / 8
Ordering information: Wilo-Drain TP 65 E 114/11 (1~230 V) Information for order placements Pump type TP 65 E 114/11 Art no. 4007101 EAN number 4016322308485 Minimum order quantity 1 Minimum order quantity unit PCE Weight (net) kg 24 Length (net) mm 320 Width (net) mm 300 Height (net) mm 505 Weight (gross) kg 24.5 Length (gross) mm 385 Width (gross) mm 285 Height (gross) mm 625 Packaging type Packaging property Cardboard box Transport packaging Pieces per pallet 1 Number per layer 1 Subject to change without prior notice. www.wilo.co.uk 50 Hz 2015-02 6 / 8
Specification texts: Wilo-Drain TP 65 E 114/11 (1~230 V) Fully submersible sewage pump as monobloc unit for the vertical wet well installation for pumping contaminated water. Hydraulics housing and impeller made of plastic, motor housing made of stainless steel. Pressure connection with horizontal pressure port and flange connection. Glanded motors in single-phase version with thermal motor monitoring and 10 metres of detachable connection cable with shock-proof plug. All units without Ex protection. Unit Pressure connection: DN 65 Flanges (according to EN 1092-2): 10 Maximum operating pressure: 2 bar Free ball passage: 44 mm Operating mode (immersed): S1 Operating mode (non-immersed): S2-8 min / S3-25% Max. immersion depth: 10 m Protection class: IP 68 Fluid temperature: +3... +35 C Weight approx.: 24.0 kg Motor data Mains connection: 1~230 V, 50 Hz Rated current: 7.2 A Nominal motor power: 1.1 kw Power consumption: 1.5 kw Power factor: 0.99 Activation type: Direct Nominal speed: 2850 rpm No. of poles: 2 Insulation class: F Max. switching frequency: 40 1/h Permitted voltage tolerance: ±10 % Cable Length of connecting cable: 10 m Cable type: OZOFLEX (PLUS) 07RNF Cable cross-section: 4G1 mm 2 Type of connecting cable: Detachable Mains plug: Materials Static seal: NBR Impeller: PUR Sealing on motor side: NBR Mechanical seal: SiC/SiC Motor housing: 1.4301 Pump housing: PUR Subject to change without prior notice. www.wilo.co.uk 50 Hz 2015-02 7 / 8
Specification texts: Wilo-Drain TP 65 E 114/11 (1~230 V) Pump shaft: 1.4404 [AISI316L] Equipment/function Float switch: Motor leakage detection: Sealing chamber leakage detection: Leakage chamber leakage detection: Motor protection: WSK Explosion protection: Information for order placements Art no.: 4007101 EAN number: 4016322308485 Price group: PG7 Make: Wilo Subject to change without prior notice. www.wilo.co.uk 50 Hz 2015-02 8 / 8