Test Sample Ballistic Threat Results. BFD (mm) Model No.: Projectile Shots (fps) Penetrations (lbs.) Min. Max. Min. Max.

Transcription

1 July 7, 016 Safe Life Defense 836 Cupertino Heights Way Las Vegas, NV ATTN: Nick Groat Dear Mr. Groat: In accordance with your instructions, Oregon Ballistic Laboratories conducted Ballistic Resistance (V 0) testing on four samples. The sample was tested in accordance with in an indoor range with the muzzle of the test barrel mounted 0 feet away from the target and positioned to produce 0-degree obliquity impacts. Four infrared light screens, in conjunction with time-based frequency counters, were positioned such that bullet velocity was measured 8. feet from the target. Penetrations were determined by examination of a.-inch clay block mounted behind the test sample. Results for all testing performed for this purpose are summarized in the following table. OBL.: Test Sample Ballistic Threat Results Velocity Weight (mm) Model.: Projectile Shots (fps) Penetrations (lbs.) Min. Max. Min. Max. Pass/Fail 1306 SLD-MTC-IIIA SIG FN Pass 1307 SLD-MTC-IIIA Mag SJHP Pass 1309 IIIA # SIG FN Pass 1308 IIIA # Mag SJHP Pass Samples will be maintained at Oregon Ballistic Laboratories for 30 days and then discarded, unless other instructions are received. If you have any further questions or concerns, please contact us. Sincerely, Brandon Bertsch Oregon Ballistic Laboratories

2 Customer: OBL ID#: Test Date: Safe Life Defense /9/016 Model.: SLD-MTC-IIIA Sample.: IIIA ID: "PREMIUM" Lot.: ft F Screen Dist. Vel. (ft.): Bar. Pressure: 30.0 in. Hg Screen 4 to target (ft): Rel. Humidity: 1.4 % Primary Vel. Location: 8. ft. from target Backing Material:." clay block w/ 3/4" plywood backing.37 Sig/1:16/10" Projectile:.37 SIG 1gr. FMJ Lot #436 D03-03 Required Velocity: 1470 fps ± 30 fps SHOT PROJECTILE POWDER TIME 1 TIME VELOCITY 1 VELOCITY AVERAGE PENET P P P P P 0 Sample was not subjected to Armor Submersion per section 7.8.

3 OBL ID#: 1307 Test Date: 6/9/016 Model.: SLD-MTC-IIIA Sample.: IIIA ID: "PREMIUM" Lot.: ft. 69. F Screen Dist. Vel. (ft.): Bar. Pressure: 30.0 in. Hg Screen 4 to target (ft): Rel. Humidity: 0. % Primary Vel. Location: 8. ft. from target Backing Material:." clay block w/ 3/4" plywood backing.44 Mag/1:0/10" Projectile:.44 Mag 40gr. SJHP Lot #443 D03-03 Required Velocity: 1430 fps ± 30 fps SHOT PROJECTILE POWDER TIME 1 TIME VELOCITY 1 VELOCITY AVERAGE PENET P P P P P 0 Sample was not subjected to Armor Submersion per section 7.8.

4 OBL ID#: 1309 Test Date: 6/9/016 Model.: IIIA #1 Sample.: Lot.: ft F Screen Dist. Vel. (ft.): Bar. Pressure: 30.0 in. Hg Screen 4 to target (ft): Rel. Humidity: 1.4 % Primary Vel. Location: 8. ft. from target Backing Material:." clay block w/ 3/4" plywood backing.37 Sig/1:16/10" Projectile:.37 SIG 1gr. FMJ Lot #436 D03-03 Required Velocity: 1470 fps ± 30 fps SHOT PROJECTILE POWDER TIME 1 TIME VELOCITY 1 VELOCITY AVERAGE PENET P P P P P 0 Sample was not subjected to Armor Submersion per section 7.8.

5 OBL ID#: 1308 Test Date: 6/9/016 Model.: IIIA #1 Sample.: Lot.: ft F Screen Dist. Vel. (ft.): Bar. Pressure: 30.0 in. Hg Screen 4 to target (ft): Rel. Humidity: 1. % Primary Vel. Location: 8. ft. from target Backing Material:." clay block w/ 3/4" plywood backing.44 Mag/1:0/10" Projectile:.44 Mag 40gr. SJHP Lot #443 D03-03 Required Velocity: 1430 fps ± 30 fps SHOT PROJECTILE POWDER TIME 1 TIME VELOCITY 1 VELOCITY AVERAGE PENET P P P P P 0 Sample was not subjected to Armor Submersion per section 7.8.