KVT-935DVD KVT-945DVD KVT-965DVD INSTRUCTION MANUAL

Transcription

1 TELEVISION WITH DVD RECEIVER KVT-DVD KVT-DVD KVT-DVD INSTRUCTION MANUAL PRINTED IN JAPAN B-0-0/0 (M)(AI)

2 Contents Before Use... About discs... Notes on playing MP/WMA... Opening/Closing the Monitor and Power Switch...8 Removing/Attaching the Protection Panel... KVT-DVD (PAL TV type) Basic operation...0 KVT-DVD (NTSC TV type)/dvd/dvd Basic operation... Basic Operations of Remote Controller... Switch Small Display... Switch Screen Mode... Control during DVD Video, DVD Audio or Video CD Playback...8 Displaying the DVD/VCD Playback Displaying the Easy Control Panel Displaying the DVD-V/DVD-A/VCD Control DVD Disc Menu VCD Zoom Control Information Display Direct Search TV Control... Displaying the TV Picture Displaying the Easy Control Panel Displaying the TV Control Displaying the TV Menu Seek Mode Auto Memory Manual Memory Preset Select Set Station Name Direct Search Tuner Control...8 Displaying the Easy Control Panel Displaying the Tuner Control Displaying the Tuner Menu Seek Mode Auto Memory Manual Memory Preset Select Set Station Name Direct Search Traffic Information Search for Program Type Radio Text CD/MP/WMA/Disc Changer Play Control... Displaying the Easy Control Panel Displaying the CD/MP/WMA/Disc Changer Control Displaying the CD/MP/WMA/Disc Changer Menu Set Disc Name Select Folder (during MP/WMA play) ID/WMA TAG Display (during MP/WMA play) Disc Select (during play by disc changer) Direct Search Source Select... Displaying the Control Displaying the Source Select Mute Telephone... Mute Telephone Character Entry... How To Use the Character Entry Adjusting the Monitor Display Position and Quality... Displaying the Screen Control Displaying the Angle Control Setup Menu Setup Menu... Displaying the Control Displaying the Setup Menu Audio Set Up... Displaying the Car Type Set Up Displaying the Speaker Set Up Displaying the Channel Level Speaker Set Up Channel Level DTA Setup Crossover Network Setup Speaker Setup Memory DVD Setup... Displaying the DVD SETUP Displaying the DVD SETUP Displaying the DVD SETUP Language Selection Parental Level Setup System Setup... Displaying the System Displaying the System AV Interface...8 Displaying the AV I/F Displaying the AV I/F User Interface...0 Displaying the User I/F Displaying the User I/F Displaying the User I/F Touch Panel Adjust Clock Security Code Setup TV Setup <Function of KVT-DVD (PAL TV type)/ DVD/DVD>... Displaying the TV Area Set Up Displaying the TV Area Set Up RDS Setup <Function of KVT-DVD (PAL TV type)>... Displaying the RDS Set Up Displaying the RDS Set Up AMP Control... Displaying the AMP Control Sound Effects Menu Sound Effects Menu...8 Displaying the Control Displaying the Sound Effects Menu Audio Control... Displaying the Audio Control SFC...0 Displaying the SFC SFC Adjustment Equalizer... Displaying the Equalizer Parametric Equalizer Position... Displaying the Position Position Fine Control Zone Control... Displaying the Zone Control Hands-Free Unit Control GSM control...8 Displaying the Control When called When dialing Calling by Phone Book Addition to Phone Book Editing the Phone Book Quick Dialing Hands Free Setup Reading the SMS (Short Message Service) messages Creating an SMS (Short Message Service) message Before Installation...8 Connection...88 Installation... Glossary... Troubleshooting Guide... Specifications...0

3 Before Use WARNING To prevent injury and/or fire, take the following precautions: Ensure that the unit is securely installed. Otherwise it may fly out of place during collisions and other jolts. When extending the ignition, battery or ground wires, make sure to use automotive-grade wires or other wires with an area of 0.mm (AWG8) or more to prevent cable deterioration and damage to the cable coating. To prevent short circuits, never put or leave any metallic objects (e.g., coins or metal tools) inside the unit. If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood dealer. Do not touch the liquid crystal fluid if the LCD is damaged or broken due to shock. The liquid crystal fluid may be dangerous to your health or even fatal. If the liquid crystal fluid from the LCD contacts your body or clothing, wash it off with soap immediately. CAUTION To prevent damage to the machine, take the following precautions: Make sure to ground the unit to a negative V DC power supply. Do not open the top or bottom covers of the unit. Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. Do not subject the faceplate to excessive shock, as it is a piece of precision equipment. When replacing a fuse, only use a new one with the prescribed rating. Using a fuse with the wrong rating may cause your unit to malfunction. To prevent short circuits when replacing a fuse, first disconnect the wiring harness. Do not use any screws except for the ones provided. The use of improper screws might result in damage to the main unit. You cannot view video pictures whilst the vehicle is moving. To enjoy TV/video pictures, find a safe place to park and engage the parking brake. NOTE If you experience problems during installation, consult your Kenwood dealer. If the unit does not seem to be working right, try pressing the reset button first. If that does not solve the problem, consult your Kenwood dealer. Reset button Screen brightness during low temperatures When the temperature of the unit falls such as during winter, the liquid crystal panel's will become darker than usual. Normal brightness will return after using the monitor for a whilst. Audio units you can control from the KVT-DVD/KVT-DVD/KVT-DVD Receiver (in November of 00): KDC-CPS8, KDC-CPS8, KDC-CPS8, KDC-C, KDC-C, KDC-C, KDC-C, KDC-C, KDC-C, KDC-D0, KDV-C80, KDC-CPS8P, KCA-HF (Set the "O-N" switch to "N" position if provided.) Navigation units you can control from the KVT-DVD/KVT-DVD/KVT-DVD Receiver (in November of 00): KNA-DV00 Loading and Replacing the battery. Use two "AAA"-size batteries. Slide the cover while pressing downwards to remove it as illustrated.. Insert the batteries with the + and - poles aligned properly, following the illustration inside the case. WARNING Store unused batteries out of the reach of children. Contact a doctor immediately if the battery is accidentally swallowed. Do not set the remote on hot places such as above the dashboard. The provided batteries are intended for use in operation checking, and their service life may be short. When the remote controllable distance becomes short, replace both of the batteries with new ones. Cleaning the panel and monitor When the operator panel and monitor panels are dirty, wipe and clean them using a soft cloth (such as a commercially available silicon coated cloth). When contaminated excessively, clean them using a cloth dipped in a neutral detergent first, then remove the detergent using a dry cloth. Do not use a hard cloth and a volatile chemical (such as an alcohol). If used, the panel surface may be scratched or printed letters may be erased. Cleaning the disc slot As dust can accumulate in the disc slot, clean it occasionally. Your discs can get scratched if you put them in a dusty disc slot. Lens Fogging Right after you turn on the car heater in cold weather, dew or condensation may form on the lens in the disc player of the unit. Called lens fogging, discs may be impossible to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a whilst, consult your Kenwood dealer. The marking of products using lasers (Except for some areas) CLASS LASER PRODUCT The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit. Region codes in the world The DVD players are given a region code according to the country or area it is marketed, as shown in the following map. Icons on the DVD discs Icon 8 : LB Description Indicates the region code where the disc can be played. Number of voice languages recorded with the audio function. The number in the icon indicates the number of voice languages. (Max. 8 languages) Number of subtitle languages recorded with the subtitle function. The number in the icon indicates the number of subtitle languages. (Max. languages) Number of angles provided by the angle function. The number in the icon indicates the number of angles. (Max. angles) Aspect ratios that can be selected. "LB" stands for Letter Box and PS for Pan/Scan. In the example on the left, the : video can be converted into letter box video. Unplayable discs This player cannot play back any of the following discs. DVD-ROM/DVD-RAM discs HQ-VCD discs CDV discs (Only the audio part can be reproduced) CD-G/CD-EG/CD-EXTRA discs (Only the audio can be reproduced) Photo CD discs Also, you cannot play back the DVD-R/RW and DVD+R/RW discs if not recorded in the DVD-Video or DVD-Audio format. Restrictions due to difference between discs Some DVD and VCD discs can be played only in certain playback modes according to the intentions of the software producers. As this player plays discs according to their intentions, some functions may not work as intended by you. Please be sure to read the instructions provided with each disc. When an inhibition icon is displayed on the monitor, it indicates that the disc being played is under the restriction as described above. Inhibition icon The illustrations of the display and the panel appearing in this manual are examples used to explain more clearly how the controls are used. Therefore, what appears on the display in the illustrations may differ from what appears on the display on the actual equipment, and some of the illustrations on the display may represent something impossible in actual operation. Explanation of icons used on this manual Indicates the key operation on the receiver. Indicates the button you must touch. Indicates the key or joystick operation on the remote controller. The initial value of each setup is shown. Gives an additional information or an operation advice.

4 About discs Notes on playing MP/WMA Handling discs Don t touch the recording surface of the disc. CD-R/RW, DVD-R/RW, and DVD+R/RW are easier to damage than a normal music CD. Use a CD-R/RW, DVD- R/RW, or DVD+R/RW after reading the caution items on the package etc. Don t stick tape etc. on the disc. Also, don t use a disc with tape stuck on it. When using a new disc If the disc center hole or outside rim has burrs, use it after removing them with a ball pen etc. Burrs Disc accessories Don t use disc type accessories. Burrs Disc cleaning Clean from the center of the disc and move outward. Removing discs When removing discs from this unit pull them out horizontally. Discs that can t be used Discs that aren t round can t be used. Discs with coloring on the recording surface or that are dirty can t be used. This unit can only play the CDs with. It may not correctly play discs which do not have the mark. A CD-R or CD-RW that hasn t been finalized can t be played. (For the finalization process refer to your CD- R/CD-RW writing software, and your CD-R/CD-RW recorder instruction manual.) Disc storage Don t place them in direct sunlight (On the seat or dashboard etc.) and where the temperature is high. Store discs in their cases. This unit can play MP (MPEG, Audio Layer )/WMA. Note, however, that the MP recording media and formats acceptable are limited. When writing MP, pay attention to the following restrictions. Acceptable media The MP/WMA recording media acceptable to this unit are CD-ROM, CD-R, and CD-RW. When using CD-RW, do full format not quick format to prevent malfunction. Acceptable medium formats The following formats are available for the media used in this unit. The maximum number of characters used for file name including the delimiter (".") and three-character extension are indicated in parentheses. ISO 0 Level ( characters) ISO 0 Level ( characters) Joliet ( characters) Romeo (8 characters) Up to 0 characters can be displayed in the long file name format. For a list of available characters, see the instruction manual of the writing software and the section Entering file and folder names below. The media reproducible on this unit has the following limitations: Maximum number of directory levels: 8 Maximum number of files per folder: Maximum number of characters for folder name: Maximum number of folders: 00 MP written in the formats other than the above may not be successfully played and their file names or folder names are not properly displayed. Settings for your MP/WMA encoder and CD writer Do the following setting when compressing audio data in MP data with the MP/WMA encoder. Transfer bit rate: MP: 8 0 kbps WMA: 8 kbps Sampling frequency: MP:,., 8 khz WMA:,., 8 khz When you use your CD writer to record MP/WMA up to the maximum disc capacity, disable additional writing. For recording on an empty disc up to the maximum capacity at once, check Disc at Once. Play mode may not be possible when portions of the functions of Windows Media Player or higher are used. Entering file and folder names The code list characters are the only file names and folder names that can be entered and displayed. If you use any other character for entry, the file and folder names are not displayed correctly. They may neither be displayed correctly depending on the CD writer used. The unit recognizes and plays only those MP/WMA which have the MP extension (.MP/.WMA). A file with a name entered with characters not on the code list may not play correctly. Writing files into a medium When a medium containing MP/WMA data is loaded, the unit checks all the data on the medium. If the medium contains a lot of folders or non-mp/wma files, therefore, it takes a long time until the unit starts playing MP/WMA. In addition, it may take time for the unit to move to the next MP/WMA file or a File Search or Folder Search may not be performed smoothly. Loading such a medium may produce loud noise to damage the speakers. Do no attempt to play a medium containing a non- MP/WMA file with the MP/WMA extension. The unit mistakes non-mp/wma files for MP/WMA data as long as they have the MP/WMA extension. Do not attempt to play a medium containing non MP/WMA. MP/WMA playing order When selected for play, Folder Search, File Search, or for Folder Select, files and folders are accessed in the order in which they were written by the CD writer. Because of this, the order in which they are expected to be played may not match the order in which they are actually played. You may be able to set the order in which MP/WMA are to be played by writing them onto a medium such as a CD-R with their file names beginning with play sequence numbers such as "0" to "", depending on your CD writer. Entering ID tag The Displayable ID tag is ID version.x. For the character code, refer to the List of Codes.

5 Opening/Closing the Monitor and Power Switch Removing/Attaching the Protection Panel Open the monitor Remove the protection panel [OPEN/CLOSE] key Close the monitor Attach the protection panel Place the right end of the protection panel onto hooks and push it until clicked and locked. Then, push the left end of the panel to lock it. Two hooks Turn the power switch on [Source] key Hold down the [Source] key more than one second to turn it off. Do not touch the moving components when you are opening or closing the monitor. If done, you will get hurt. Do not try to open or close the monitor by hand. You can automatically open or close the monitor when you turn on or off the ignition key (see page ). If the monitor movement is stopped by the shift lever or another obstacle when the monitor is opened, this movement is canceled by the safety function. If an obstacle is pinched by the monitor when closed, the monitor movement is also canceled by the safety function. If it has occurred, remove the obstacle and press the [OPEN/CLOSE] key again. Close the monitor first, then remove or attach the protection panel. After you have removed the protection panel, you cannot operate the receiver. After you have removed the protection panel, you can flash the burglar alarm lamp (see page ). 8

6 SRC SRC KVT-DVD (PAL TV type) Basic operation When the monitor is open Play Disc [Disc insertion slot] A disc is played when you insert it. Stop to Play [] key Stops to play. Play/Pause [8] key Pauses and replays a disc. Eject Disc [Eject] key The disc is ejected. 8 Track/Station Selectors [Up] /[Down] key Selects a music or chapter, track, or frequency. Band/Folder Selectors [FM]/[AM] key Press the [FM] key to switch to the FM// band or the next folder/disc. Press the [AM] key to switch to the AM band or the previous folder/disc. p Attenuator [Att] key Attenuates the volume. Press it again to cancel muting. Switch Video Sources [V.SEL] key The video sources are switched each time you press the key. q Traffic Information [TI] key Turns the Traffic Information function On or Off. (see page ) ATT DISP SCREEN MODE V.SEL FNC BSM V.OFF S M V F TI TI AV OUT SEL Clears the video image when pressed more than one second. When pressed again, the original image is redisplayed. w e Screen Setup [SCREEN] key Displays the Screen Setup or Angle Setup. (see page ) Function [FNC] key The video sources are switched each time you press the key. Switch Audio Source/Power Supply [Source] key The audio sources are switched each time you press the key. Switches the source that is output at the AV OUTPUT terminal when it is pressed more than second. When the monitor is closed r Switch Screen Mode/GSM [MODE]/[GSM] key The mode is switched. (see page ) The GSM Control appears when you hold down the key more than second. t Small Display [Display] key Switches to the Small Display. (see page ) * Optional accessory Hold down more than second to turn the power supply Off. Push it again to turn power supply On. ATT DISP TI Volume Controls []/[ ] key When a disc has already been loaded (when the "red" disc indicator lights), do not insert another disc into its slot. If done, the discs may be scratched or the system may be damaged. Disc indicator The display turns on when you put the parking brake, except for the navigation system. 0

7 SRC SRC KVT-DVD (NTSC TV type)/dvd/dvd Basic operation When the monitor is open Play Disc [Disc insertion slot] A disc is played when you insert it. Stop to Play [] key Stops to play. Play/Pause [8] key Pauses and replays a disc. Eject Disc [Eject] key The disc is ejected. 8 Track/Station Selectors [Up] /[Down] key Selects a music or chapter, track, or frequency. Band/Folder Selectors [FM]/[AM] key Press the [FM] key to switch to the FM// band or the next folder/disc. Press the [AM] key to switch to the AM band or the previous folder/disc. p Attenuator [Att] key Attenuates the volume. Press it again to cancel muting. Switch Video Sources [V.SEL] key The video sources are switched each time you press the key. q Select Seek Mode [Auto] key Selects the Seek mode. (see pages /0 for the <Seek Mode>) ATT DISP SCREEN MODE V.SEL FNC V.OFF S M V F AUTO AV OUT SEL Clears the video image when pressed more than one second. When pressed again, the original image is redisplayed. w e Screen Setup [SCREEN] key Displays the Screen Setup or Angle Setup. (see page ) Function [FNC] key The video sources are switched each time you press the key. AUTO Switch Audio Source/Power Supply [Source] key The audio sources are switched each time you press the key. Switches the source that is output at the AV OUTPUT terminal when it is pressed more than second. When the monitor is closed r Switch Screen Mode [MODE] key The mode is switched. (see page ) t Small Display [Display] key Switches to the Small Display. (see page ) * Optional accessory ATT DISP AUTO AUTO Hold down more than second to turn the power supply Off. Push it again to turn power supply On. Volume Controls []/[ ] key When a disc has already been loaded (when the "red" disc indicator lights), do not insert another disc into its slot. If done, the discs may be scratched or the system may be damaged. Disc indicator The display turns on when you put the parking brake, except for the navigation system.

8 Basic Operations of Remote Controller TV DVD AUD BAND ATT STOP DIRECT DISC SRC RETURN TV DVD AUD BAND ATT STOP DIRECT DISC SRC RETURN Joystick [DISC] Right or left: Selects a chapter, a track or a song. Up or down: Select a folder or a disc. Push: Plays or pauses. [TV] Right or left: Select a channel. Up: Switches to TV, TV, VIDEO or VIDEO. Push: Selects the Seek mode. (see page for the <Seek Mode>) [TUNER] Right or left: Selects a station. Up: Switches to the FM, FM, or FM band. Down: Switches to the AM band. Push: Selects the Seek mode. (see page 0 for the <Seek Mode>) [DVD] Returns to the previous when the DVD Disc Menu is used. q [DVD] Selects an option from the DVD Disc Menu. w [TV] [TUNER] Call the stations from memory. [DVD] Fast Backward (Rewind). The speed changes each time it is pressed. Fast Forward. The speed changes each time it is pressed. Switches the voice channel. Slow Backward. Slow Forward. Switches the caption language. ` Switches the view angle. e Switches the Video source at the AV OUTPUT plug. r Clears a numeric value you have entered in the built-in disc player during direct search. OPEN MODE 8 [DVD] TOP MENU MENU Calls the Top menu of DVD Disc Menu. AUDIO PBC ENTER AUDIO [Other than DVD] ( "TV", "AUD") Opens or closes the monitor. SUBTITLE V.SEL SUBTITLE [DVD] Calls the DVD Disc Menu. [VCD] Turns the PBC (Playback Control) function On or Off. AV OUT ANGLE CLEAR AV OUT ANGLE CLEAR [Other than DVD/VCD] ( "TV", "AUD") Switches the mode. (see page ) p [DVD] [VCD] Enters your selection from the DVD/VCD Disc Menu. [Other than DVD/VCD] ( "TV", "AUD") The video sources are switched each time you press the key. Remote Control Mode selector Selects one of the following remote control modes. TV: TV source DVD: Built-in DVD/VCD/CD/MP/WMA player source AUD: Tuner source or attached disc changer source Volume Control Adjusts the volume. Press this control to mute. Press it again to cancel muting. [DISC] Stops to play the built-in disc player. Switches over the sound source each time it is pressed. Selects the Direct Search mode. (see page /// for <Direct Search>) [DVD] : An operation during DVD playback [VCD] : An operation during VCD playback [DISC] : An operation during DVD, VCD, CD, MP/WMA or MD playback [Other than DVD] : An operation other than DVD playback [Other than DVD/VCD] : An operation other than DVD or VCD playback [TV] : An operation during TV source [TUNER] : An operation during FM/AM broadcasting source

9 SCREEN MODE V.SEL FNC V.OFF S M V F AV OUT SEL SCREEN MODE V.SEL FNC V.OFF S M V F AV OUT SEL Switch Small Display Switch Screen Mode The Small Display mode changes each time the [Display] key is pressed. The Screen mode of the monitor changes each time the [MODE] key is pressed. KVT-DVD (PAL TV type) Full picture mode [FULL] KVT-DVD (NTSC TV type)/dvd/dvd Justify picture mode [JUST] Cinema picture mode [CINEMA] Zoom picture mode [ZOOM] Normal picture mode [NORMAL] * Hold down the [Display] key more than second to switch to the Frequency display. When the Menu, Easy Control, or Navigation is selected, it is shown in the full-size display mode automatically. Their Screen mode cannot be changed. The Screen mode can be set for each of DVD/VCD, TV, and video images.

10 ATT SOURCE TI EJECT Control during DVD Video, DVD Audio or Video CD Playback Control during DVD Video, DVD Audio or Video CD Playback Various control s appear when you play back a DVD Video (DVD-V), a DVD Displaying the DVD/VCD Playback You can use the following operations when displaying DVD/VCD images. DVD playback Plays back the DVD or VCD. DVD VIDEO Title Chap T 0:0: Mode: FULL AVOUT: TV Title Number Display (DVD-V) Group Number Display (DVD-A) Chapter Number Display (DVD-V) Track Number Display (DVD-A) Play Time Display Forward Chapter Search Area (DVD-V) Selects the next chapter. Forward Track Search Area (DVD-A) Selects the next track. Backward Chapter Search Area (DVD-V) Selects the previous chapter. Backward Track Search Area (DVD-A) Selects the previous track. Audio (DVD-A) or a Video CD (VCD) disc. Displaying the Easy Control Panel The Control Panel is displayed in a floating position of the DVD/VCD. Display of Easy Control Panel e Adjusts the volume. r Switches the source. t Stops to play. y Rewinds or fast forwards. u Chapter Search (DVD-V) Searches for a chapter. Track Search (DVD-A) Searches for a track. Scene/Track Search (VCD) Selects a scene (when PBC is On) or a track (when PBC is Off). i Plays or pauses. DVD Disc Menu Control Buttons Area Information Display Button Area SRC DVD VIDEO Title Chap T 0:0: IN 8 The Easy Control Panel display is cleared when you touch the center of image display area. VCD playback DVD VCD Mode: FULL PBC VER AVOUT: TV 0 Scene P 0:0 8 8 Scene/Track Number Display (VCD) Forward Scene/Track Search Area (VCD) Selects the next scene (when PBC is On) or track (when PBC is Off). p Backward Scene/Track Search Area (VCD) Selects the previous scene (when PBC is On) or track (when PBC is Off). q Zoom Control Button Area Displays the Zoom Control buttons (see page ). w Information Display Button Area For DVD/VCD playback, DVD-V/VCD picture selection, or controller key operations, see <KVT- DVD/DVD/DVD Basic Operations> (see page 0/). The information display is cleared automatically after approximately seconds. Also, the information can be displayed automatically when it is updated (see page 0). 8

11 Control during DVD Video, DVD Audio or Video CD Playback Displaying the DVD-V/DVD-A/ VCD Control Plays a DVD/VCD using various functions. DVD/VCD Control IN o Adjusts the volume. ; Ejects the disc from the built-in disc player. a Calls the Sound Effects Menu. (see page ) s Switches the source. Displays the Source Select when touched more than one second. (see page ) d Calls the Setup Menu. (see page 8) f Fast Forwards or Rewinds. g Stops to play. When pressed twice, the disc is played from its beginning when you play it in the next time. h Selects a chapter, a scene or a track. When the DVD-V is paused, touch this button to start single-frame stepping. j Plays or pauses. k Slow Forwards or Backwards. (DVD-V, DVD-A) l Turns the PBC function of VCD On or Off. (VCD Ver.0) / Switches the Repeat Play operations in the following sequence. DVD-V: Title Repeat, Chapter Repeat, Repeat Off DVD-A: Group Repeat, Track Repeat, Repeat Off VCD: Track Repeat, Repeat Off (Available when the PBC is off) z Scrolls the display text. x Switches the play time display in the following sequence. DVD-V: Title, chapter, remaining titles DVD-A: Track, group, remaining groups VCD: Track, disc, remaining discs (Effective only when the PBC function is off) c Title Number Display (DVD-V) Group Number Display (DVD-A) v Chapter/Scene/Track Number Display b Play Time Display n Appears when a disc is inserted. m Function Indicator, Clock/Level meter Display When touched, the display of Clock, Level meter, Clock, and Level meter are switched one after the other.. Volume Label Display 0

12 Control during DVD Video, DVD Audio or Video CD Playback DVD Disc Menu Select Disc Menu options VCD Zoom Control Direct Search Selects an option from the DVD Disc Menu. Displays the Disc Menu Control Disc Menu MENU Ctrl Displays an enlarged VCD. Displays the Zoom Control You can search for a DVD/VCD chapter, scene or track by entering its number. Selects the Direct Search mode DVD Disc Menu Control Buttons Area (page 8) Menu Control TOP Menu MENU Top RTN Zoom Control Button Area (page 8) DIRECT MENU Ctrl ANGLE SUB Page + Page - ZOOM / / Calls the Menu Control. Switches the picture angle. (during program playback only) Switches the caption language. (during program playback only) Switches the voice language. (during program playback only) Switches the still images. (during DVD-A playback only) Displays the Zoom Control. Clears the Disc Menu Control. AUDIO / Exit Cancel Calls the Menu. (during DVD-V playback only) Returns to the Disc Menu Control. Selects a menu option. Enters your menu selection. Returns to the previous menu. Displays the Top Menu. Zoom Control Zoom Control ZOOM Zoom Enter Top Off Zoom Control Changes the zoom ratio at levels ( times, times, times, or off) each time you touch. Scrolls the in the direction you touch. Clears the Zoom Control button. Information Display Displays the DVD and AV information. Zoom Top Off Information Display Button Area (Page 8) Exit The following items can be searched directly each time it is pressed. DVD-V: Title, Chapter, Time, Direct number DVD-A: Group, Track, Time, Direct number VCD (when PBC is On): Scene, Direct number VCD (when PBC is Off): Track, Time However, the direct search may not be supported for some discs. Enter a number or time When playing back a VCD, enter a PBC number (if PBC is On) or a track number (if PBC is Off). Search To clear your incorrect entry, press (CLEAR). The information is displayed for seconds. Cancel The operation ends automatically if you do not operate within 0 seconds. Changes the zoom ratio at levels ( times, times, times, or off) each time you touch. Scrolls the in the direction you touch. Returns to the Disc Menu Control.

13 TV Control TV Control Various control s appear in the TV Source mode. Displaying the TV Picture Various control s appear in the TV Source mode. TV Picture TV Selects the TV Pictures. TV Group Preset ch AUTO Mode: FULL AVOUT: TV Displaying the Easy Control Panel The Control Panel is displayed in a floating position of the TV picture. Displaying the Easy Control Panel SRC 0 TV 8 TV Band Number Display TV Area Group Display <Function of KVT-DVD (PAL TV type)> (see page ) Memory Number Display Channel Number Display Channel Up Area Increase the channel. Channel Down Area Decrease the channel. Band/Video Switch Area Switches to TV, TV, VIDEO or VIDEO. 8 Information Display Button Area For TV picture selection and receiver key operations, see <KVT-DVD/ DVD/ DVD Basic Operations> (see page 0/). The information display is cleared automatically after approximately seconds. Also, the information can be displayed automatically when it is updated (see page 0). Adjusts the volume. p Switches the source. q Switches to Video (VIDEO or VIDEO). w Switches the TV band (to TV or TV). e Calls up a channel. r Switches the Seek mode. (see page for the <Seek Mode>) The Easy Control Panel display is cleared when you touch the center of image display area. Displaying the TV Control You can tune in a TV station using various functions. TV Control 8 Next TV - AME SEEK Displaying the TV Menu You can select menu options using various functions. MENU TV Menu TV Group Preset ch AUTO TV VIDEO TV SEEK SRC Preset 0 AUTO 0 ch 8 t Adjusts the volume. y Calls the TV Menu. u Calls the Sound Effects Menu. (see page 8) i Switches the source. Displays the Source Select when touched more than one second. (see page ) o Calls the Setup Menu. (see page ) ; Switches to VIDEO or VIDEO. a Switches to TV or TV. s Select a channel. Use the <Seek Mode> (see page ) to change the channel tuning sequence. d Switches between to buttons and Function buttons to use. f Selects the Auto Memory mode. (see page for the <Auto Memory>) g Switches the Seek mode. (see page for the <Seek Mode>) h When to buttons appear, you can call up the channels from memory. For memory of broadcasting stations, see <Auto Memory> (see page ) or <Manual Memory> (see page ). j Seek Mode Indicator k Clock/Level meter Display When touched, the display of Clock, Level meter, Clock, and Level meter are switched one after the other. l TV Area Group Display <Function of KVT-DVD (PAL TV type)> (see page ) / Memory Number Display z Selects options from various function menus. x Returns to the TV Control. The available functions vary depending on the model used (the tuner specifications and the broadcasting system that can be received).

14 TV Control Seek Mode Sets a TV station selection. SEEK If is not shown, touch Next. The mode is switched each time you touch the button. AUTO AUTO MANUAL SEEK Auto Memory Tunes in a station with good reception automatically. Tune in stations in memory one after another. Switches to the next channel manually. Stores stations with good reception in memory automatically. Manual Memory Stores the current receiving channel in memory. If to are not shown, touch Next. Continue to touch until the memory number appears. Preset Select Lists and tunes in stations in memory one after the other. Select a channel you wish to store in memory Call the TV Menu TV Store in memory Set Station Name Names a station. Select a station you wish to name Enter a name TV Call the TV Menu MENU Selects the Set Name mode Name Set For character entry details, see <Character Entry> (see page ). Exit the Set Name mode Function of KVT-DVD (NTSC TV type) Direct Search Tunes in a station when its channel number is entered. Selects the Direct Search mode DIRECT Enter a channel number When you enter a channel number, signal reception starts. Example: When you receive Channel 0 Direct Search ends automatically if you do not operate within 0 seconds. Select a band you wish to store in memory MENU (P y) OK TV Select the Auto Memory mode Call the Preset Select Menu Preset Select You can store up to 0 stations in memory. You can set a station name only after you have applied the parking brake. AME If AME is not shown, touch Next. Start Auto Memory TV P ch TV Preset chch TV Touch or. Auto Memory terminates when stations are stored or when all stations are tuned in. The operation ends automatically if you do not operate within 0 seconds. Tunes in the displayed station. If the station name is displayed if it has been set. Switches the band of the displayed station list. Band Display. Returns to the TV Menu.

15 Tuner Control Tuner Control Various control s appear in the Tuner Source mode. Displaying the Easy Control Panel The Tuner Control Panel is displayed in a floating position of the selected picture. Displaying the Easy Control Panel SRC TUNER FM AUTO AM FM SEEK 8. MHz Adjusts the volume. Switches the source. Switches the band (to AM or FM//). Tunes in a station Switches the Seek mode. (see page 0 for the <Seek Mode>) For receiver key operations, see <KVT-DVD/ DVD/DVD Basic Operations> (see page 0/). The Easy Control Panel display is cleared when you touch the center of image display area. Displaying the Tuner Control You can tune in a station using various functions. Tuner Control 0 8 SRC Next 8 MONO AME SEEK SCRL LO.S Preset 8. MHz Displaying the Tuner Menu You can select menu options using various functions. MENU Tuner Menu AUTO 0 Adjusts the volume. Calls the Tuner Menu. 8 Calls the Sound Effects Menu. (see page 8) Switches the source. Displays the Source Select when touched more than one second. (see page ) p Calls the Setup Menu. (see page ) q Switches to the FM// band. w Switches to the AM band. e Tunes in a station. Use the <Seek Mode> to change the frequency switching. r Switches between to buttons and Function buttons to use. MONO t Select the Monaural sound mode. (Only when receiving the FM broadcast) <Function of KVT-DVD (PAL TV type)> CRSC Turns the CRSC function On or Off. (Only when receiving the FM broadcast) <Function of KVT-DVD (NTSC TV type)/ DVD/DVD> y Selects the Auto Memory mode. (See page 0 for the <Auto Memory>) u Switches the Seek mode. (see page 0 for the <Seek Mode>) i Selects the Program Service Name, or Radio Text mode for text display. <Function of KVT-DVD (PAL TV type)> o Scrolls the display text. <Function of KVT-DVD (PAL TV type)> ; Turns the Local seek function On or Off. <Function of KVT-DVD (PAL TV type)> a When to buttons appear, you can call up the stations from memory. For memory of broadcasting stations, see <Auto Memory> (see page 0) or <Manual Memory> (see page 0). s Seek Mode Indicator d Clock/Level meter Display When touched, the display of Clock, Level meter, Clock, and Level meter are switched one after the other. f Memory Number Display g Selects options from various function menus. h Returns to the Tuner Control. 8 The available functions vary depending on the model used (the tuner specifications and the broadcasting system that can be received).

16 Tuner Control Seek Mode Sets a station selection. SEEK SEEK If is not shown, touch Next. The mode is switched each time you touch the button. Manual Memory Stores the current receiving station in memory. Select a station you wish to store in memory FM AM Store in memory Preset Select Lists and tunes in stations in memory one after the other. Call the Tuner Menu MENU Call the Preset Select Menu Function of KVT-DVD (NTSC TV type)/dvd/dvd Set Station Name Names a station. Tune in a station you wish to name FM Call the Tuner Menu AM AUTO Tunes in a station with good reception automatically. Preset Select MENU AUTO Tune in stations in memory one after another. If to are not shown, touch Next. Continue to touch until the memory number appears. Selects the Set Name mode MANUAL Switches to the next channel manually. Name Set Auto Memory Stores stations with good reception in memory automatically. Select a band you wish to store in memory Select the Auto Memory mode AME FM AM If AME is not shown, touch Next. FM P 8. MHz FM Preset 8. MHz Tunes in the displayed station. If the station name is displayed if it has been set. (KVT-DVD (NTSC TV type)/dvd/dvd) Switches the band of the displayed station list. Band Display. Returns to the Tuner Menu. Enter a name For character entry details, see <Character Entry> (see page ). Exit the Set Name mode OK You can store up to 0 stations in memory. When you are receiving the traffic information, you can also name the traffic information station in the same way as above. (Function of KVT-DVD (NTSC TV type)) You can set a station name only after you have applied the parking brake. Start Auto Memory Touch or. Auto Memory terminates when stations are stored or when all stations are tuned in. The operation ends automatically if you do not operate within 0 seconds. 0

17 Tuner Control Direct Search Tunes in a station when its frequency is entered. Select a band Function of KVT-DVD (PAL TV type) Traffic Information When a traffic bulletin starts, any source is switched to the traffic information and it is displayed automatically. When the traffic bulletin starts... The Traffic Information appears automatically. Function of KVT-DVD (PAL TV type) Search for Program Type A program is tuned when you set its program type. Call the Tuner Menu MENU Function of KVT-DVD (PAL TV type) Radio Text You can display the radio text. Call the Tuner Menu MENU Selects the Direct Search mode DIRECT Enter a frequency Traffic Information SRC Call the PTY Search Menu PTY Search Display the Radio Text Radio-Text SRCH When you enter them, signal reception starts. Example: When you receive FM. MHz Example: When you receive AM 80 khz Control the volume. Calls the Sound Effects Menu. (see page 8) Switches the source. Calls the Setup Menu. (see page ) n RTN The operation ends automatically if you do not operate within 0 seconds. Preset of traffic information volume Tune in a station Adjust the volume Selects a program type. Scrolls the program type list. Searches for the program type. It is displayed when the Program Type is selected. Returns to the Tuner Menu. Displays the Radio Text Scrolls the Radio Text. It is displayed when information cannot be displayed on a single page. Returns to the Tuner Menu. Preset the volume Select a program type News Continue to touch the key until the volume is displayed. The preset volume is used automatically when the traffic bulletin starts in the next time. Search for the program type SRCH

18 CD/MP/WMA/Disc Changer Play Control CD/MP/WMA/Disc Changer Play Control You can call various control s during CD/MP/WMA/Disc Changer playback. Displaying the Easy Control Panel The CD/MP/WMA/Disc Changer Play Control Panel is displayed in a floating position of the selected picture. Display of Easy Control Panel During CD playback SRC DVD CD Track P :0 During MP/WMA playback Adjusts the volume. Switches the source. Stops to play the built-in disc player. When a CD is played back on the built-in disc player: Rewinds or fast forwards. Selects a song. Plays or pauses. When an MP/WMA is played back on the built-in disc player: Selects a folder. 8 When a disc is played back on the disc changer: Selects a disc. For CD/MP/WMA/Disc Changer playback and receiver key operations, see <KVT-DVD/ DVD/DVD Basic Operations> (see page 0/). The Easy Control Panel display is cleared when you touch the center of image display area. Displaying the CD/MP/WMA/Disc Changer Control You can play the CD/MP/WMA/disc changer using various functions. CD Control SRC SCN REP RDM DISP SCRL TIME Track P :0 IN 8 During CD playback Adjusts the volume. p Calls the CD/MP/WMA/Disc Changer Menu. q Calls the Sound Effects Menu. (see page 8) w Switches the source. Displays the Source Select when touched more than one second. (see page ) e Calls the Setup Menu. (see page ) r Ejects the disc from the built-in disc player. t Fast Forwards or Rewinds. y Selects a track. u Plays or pauses. i Starts or stops Scan Play (that plays the beginning of each song one after the other). o Repeats to play (the present track). ; Starts or stops Random Play (to play songs in random order). SRC DVD MP/WMA P :8 F - F + a Selects the Disc Name (see <Set Disc Name>, page ), Disc Text, or Track Text mode for text display. s Scrolls the display text. During playback on disc changer SRC CD-CH D T P 00:0 8 8 D - D + d Switches the play time display between Track, Disc, and Disc Remaining Time. f Track Number Display g Play Time Display h Appears when a disc is inserted. j Stops to play the built-in disc player. When pressed twice, the disc is played back from its beginning in the next time. k Clock/Level meter Display When touched, the display of Clock, Level meter, Clock, and Level meter are switched one after the other. l Function Indicator

19 CD/MP/WMA/Disc Changer Play Control MP/WMA Control 0 SRC Next 8 0 SCN REP SCRL - P 00:0: - FREP IN During MP/WMA play / Ejects a disc. z Fast Forwards. x Stops to play. When pressed twice, the disc is played back from its beginning in the next time. c Selects a song. v Plays or pauses. b Selects a folder. n Starts or stops Scan Play (that plays the beginning of each song one after the other). m Repeats to play (the present song)., Starts or stops Random Play (to play songs of the present folder in random order).. Selects the Folder name, File name, Title (ID/WMA tag), Artist name (ID/WMA tag), or Album name (ID tag) for text display. P Scrolls the display text. Q Switches the button display. W Repeats to play the song of the present folder. E Folder and File Number Display R Play Time Display T Appears when a disc is inserted. Y Clock/Level meter Display When touched, the display of Clock, Level meter, Clock, and Level meter are switched one after the other. U Function Indicator Disc Changer Control 8 8 SRC 0 Next 8 SCN REP RDM SCRL TIME 0 D T P 0: - DREP MRDM During play by the disc changer I Selects a track. Starts Fast Forward or Fast Rewind when it is held down. O Selects a disc. : Plays or pauses. A Starts or stops Scan Play (that plays the beginning of each song one after the other). S Repeats to play (the present track). D Starts or stops Random Play (to play songs in random order). F Repeats to play disc (the present disc). G Starts or stops Magazine Random Play (to play songs of the disc changer in random order). H Switches the button display. J Selects the Disc Name (see <Set Disc Name>, page ), Disc Text, or Track Text mode for text display. K Scrolls the display text. L Switches the play time display between Track, Disc, and Disc Remaining Time. Disc Number Display Track Number Display Play Time Display Clock/Level meter Display When touched, the display of Clock, Level meter, Clock, and Level meter are switched one after the other. Function Indicator

20 CD/MP/WMA/Disc Changer Play Control Displaying the CD/MP/WMA/ Disc Changer Menu You can select menu options using various functions. MENU Selects options from various function menus. Returns to the CD/MP/WMA/Disc Changer Control. Set Disc Name Names a CD. Play a CD you wish to name Call the CD/Disc Changer Menu MENU Select Folder (during MP/WMA play) The folders of an MP/WMA disc are listed for quick search. Call the MP/WMA Menu MENU CD Menu Select the Set Name mode Start the Select Folder Name Set Folder Select CD The Name Set position varies depending on the disc you are playing. Enter a name The available functions vary depending on the source used. For character entry details, see <Character Entry> (see page ). Exit the Set Name mode 8 Open 0. File Name OK You cannot name an MD or MP/WMA disc. You can store up to 00 disc names in memory. The receiver s Set Disc Name function uses the Memory Function of the receiver itself, rather than the memory function of disc changer or others. Therefore, you can store up to 00 disc names independent from the memory function of the attached device. Returns to the root directory. Displays the next higher level of hierarchy. Displays a folder if the subdirectory has a folder without files. When you touch the folder, it opens. Displays a folder if the subdirectory has files without a folder. When you touch the folder, it opens. Displays a folder if the subdirectory has both files and folders. When you touch the folder, it opens. Displays the folder which has no files and folders in lower layers. Displays the MP/WMA files. When you touch a file, its song is played back. 8 Plays the selected folder. Scrolls the list. Select a song ##. File Name Display the desired song and touch the file display. 8

21 CD/MP/WMA/Disc Changer Play Control ID/WMA TAG Display (during MP/WMA play) The ID/WMA TAG information of MP/WMA file is listed. Disc Select (during play by disc changer) The discs loaded on the disc changer are listed for quick disc selection. Direct Search Searches for a disc or a song when its number is entered. During play on the built-in disc player Call the MP/WMA Menu Calls the Disc Changer Menu Select the Direct Search mode MENU MENU DIRECT Display the ID/WMA TAG Infomation Call the Disc Select Menu CH Disc Select The following items can be searched directly each time it is pressed. CD: Track number, Total play time MP/WMA: Folder, File Enter a disc or track number Search.KENWOOD When searching for a song: Scrolls the list. Plays the displayed disc. Selects the Disc Name or Disc Text mode for text display. Scrolls the list. (It is not displayed when a disc changer having or less discs is used.) During play on an external in disc player or disc changer ENTER Enter a disc or track number Select the desired disc.kenwood Touch the desired disc display. Search When searching for a song: When searching for a disc: The operation ends automatically if you do not operate within 0 seconds. 0

22 Source Select Mute Telephone Character Entry Source Select The source you wish to listen to can be selected quickly. Displaying the Control Mute Telephone When the telephone is called, the system is paused automatically. When the telephone is called... The Phone Call ("Call") appears, and system is paused. How To Use the Character Entry When you select the Set Disc Name mode or others, the following appears for character entry. Character Entry Press this key several times unit the Control appears. Phone Call ("Call") f や -l Control Call r ゆ x つ よ ' Call OK IN The Source Select can be displayed from the control of any source. Returns to the previous source and restart the system to play. If you continue to listen the source audio during phone call... Shifts the cursor. Enters a space. If you erase a character, locate the cursor on it and touch this button. Enters characters. Displays respective character entry s. Exits the Character Entry mode and returns to the previous. You can enter characters only after you have applied the parking brake. Displaying the Source Select SRC Adjusts the volume. Select the source. Returns to the Control previously displayed. The system restarts to play while the phone call is continued. When the call ends... Continue to touch until the Source Select appears. Hang up the phone. The system restarts to play. Source Select All Off Tuner TV DVD CD-CH Next

23 Adjusting the Monitor Display Position and Quality Setup Menu Adjusting the Monitor Display Position and Quality You can adjust the position and picture quality of the monitor. Displaying the Screen Control You can adjust the picture quality using the following keys. Screen Control B TIN COL CONT BLK Auto DIM Off Angle OK 8 Brightness Control Disabled if the Auto Dimmer is On. Tint Control Displayed when an NTSC system image is displayed. Color Control Displayed on the TV and Video only. Contrast Control Black Level Adjustment Displays the Adjust Monitor Position. (see Displaying the Angle Control >, page ) Auto Dimmer Setup When turned "On", the display is dimmed automatically when the ambient becomes dark. 8 Returns to the previous. Setup Menu You can set up various receiver parameters. Displaying the Control Press this key several times until the Control appears. Control IN You can call the same Setup Menu for the Control of each source. The Screen Control is displayed only when you have applied the parking brake. Displaying the Angle Control You can set the monitor position and open/close speed. Angle Angle Control 0 Monitor Action Normal 0 Screen OK Monitor Angle Adjustment p Forward/Backward Monitor Position Adjustment q Monitor Open/Close Setup When turned "On", the monitor is opened or closed automatically when you turn on or off the ignition key. w Monitor Action Setup When set to "Quick", the monitor is opened quickly. e Returns to the Screen Control. r Returns to the previous. Displaying the Setup Menu Setup Menu Security Adjusts the volume. Scrolls the Setup Menu. Calls each Setup Menu. Recalls the previous Setup Menu. Calls the Sound Effects Menu. (see page 8) Returns to the Control of the previous source. Your setup on the <Sound Effects Menu> is adjusted automatically according to your <Audio Set Up> (see page ) on the Setup menu. We recommend you to complete the <Audio Set Up> first, then set up the <Sound Effects Menu>. The available functions vary depending on the model used (the tuner specifications and the broadcasting system that can be received).

24 Setup Menu Audio Set Up You can set up the car type and speaker system you use together with this unit. Displaying the Car Type Set Up If your vehicle type is selected, the Digital Time Alignment is set automatically (for timing adjustment of sound output for each channel) to have the highest surround effects. Audio Set Up Car Type Set Up MENU Preset DTA 8 Adjusts the volume. Returns to the Control of the previous source. Calls the Sound Effects Menu. (see page 8) Calls the Setup Menu. Sets up the car type you use together with this unit. Displays the DTA (Digital Time Alignment) Setup. (see page 0) You can adjust the digital time alignment that was set automatically when you selected the car type. Call the DTA setup from memory. 8 Displays the Speaker Set Up. If or Audio Set Up Next is not shown, touch to display it. Prev. Displaying the Speaker Set Up When the speaker type and size are set, the speaker crossover network and equalizer curve are set automatically. Speaker Set Up 0 Use 0 Selects a speaker to be set. (see <Speaker Set Up>, page 8) p Selects a speaker type. (see <Speaker Set Up>, page 8) q Stores your setup in memory. (see <Speaker Setup Memory>, page ) w Displays the Speaker Crossover Setup. (See <Crossover Network Setup>, page ) You can adjust the crossover setup that was set automatically when you selected the speaker type. e Set the use or no use of tweeter. (see <Speaker Set Up>, page 8) r Displays the Channel Level Setup. t Displays the Car Type Set Up. Displaying the Channel Level You can set the volume at each setup position. y Selects a speaker to be set. (see <Channel Level>, page ) u Sets the speaker volume. (see <Channel Level>, page ) Channel Level i Starts or stops test signal tone output for setup check db o Displays to the Speaker Set Up. Your setup on the <Sound Effects Menu> is adjusted automatically to get the best sound effects according to the car type and speaker you have set on the <Audio Set Up> (see page ). We recommend you to complete the <Audio Set Up> first, then set up the <Sound Effects Menu>. You can fine-adjust the automatic set value by <DTA Setup> (see page 0), <Crossover Network Setup> (see page ), or <Parametric Equalizer> (see page ).

25 Setup Menu Speaker Set Up Select a speaker type Channel Level Select a speaker type and its size to get the best sound effects. Select a speaker you wish to adjust You can select any of the following speaker types. Set the volume at each setup position. Select a speaker you wish to adjust Speaker Set Up Center speaker: None, 0 mm x 0 mm, cm, 0 cm, cm, cm over Front speakers: OEM, 0 cm, cm, cm, cm, 8 cm, x inches, x inches, x8 inches, x inches, x0 inches Channel Level setup +8 db Rear speakers: None, OEM, 0 cm, cm, cm, cm, 8 cm, x inches, x inches, x8 inches, x inches, x0 inches Center speaker Front speaker Rear speaker Subwoofer Tweeter setup You can set the tweeter when you are selecting front speakers. If you are using a tweeter together with the front speakers, set the tweeter to "Use". In the "Use" position, the Equalizer is adjusted to its best position. Subwoofer: None, cm, 0 cm, cm, 0 cm, 8 cm over If you set the center speaker to "NONE" even in a short time when you are setting the SFC (see page 0) to "Bypass+Center", the SFC is set to "Bypass" automatically. If you set the center and rear speakers to "NONE" when you are setting the SFC (see page 0) to "Dolby PL II", the SFC is set to "Bypass" automatically. Select "NONE" if you have no speakers. Center speaker Left front speaker Right front speaker Left rear speaker Right rear speaker Adjust the volume 8

26 Setup Menu DTA Setup Set a delay time Crossover Network Setup Speaker Setup Memory Manually set the sound output timing of each channel. Display the DTA Setup DTA DTA Setup (P ) The speakers are virtually moved to the desired distance. When the values of center speaker and front speakers increase, they are virtually moved forward. When the values of rear speakers and subwoofer increase, they are virtually moved backward. Store or call your setup into/from memory To store your setup in memory Preset You can manually set a crossover frequency of speakers. LPF X'Over (P w) 00Hz Frequency Slope 8dB/Oct Phase Return khz Normal You can store all of speaker and crossover setup in memory simultaneously. To store your setup in memory Preset (P q) Continue to touch more than seconds. To call your setup from memory Preset (P q) Return Selects a speaker to be adjusted. Sets a delay time of the selected speaker. Stores the adjusted status in memory or calls it from memory. Returns to the Car Type Set Up. Select a speaker you wish to adjust Continue to touch more than seconds. To call your setup from memory Preset You can also call the setup from memory by touching Preset on the Car Type Set Up. Sets a crossover frequency. Sets a crossover slope. Returns to the Speaker Set Up. Sets the phase of subwoofer output (it is displayed when the subwoofer crossover frequency is set). The phase is reversed 80 degrees when set to "Reverse". When you select a speaker type from the Speaker Setup, the crossover frequency setup is erased. During crossover setup, the speaker type is set to "USER" on the Speaker Set Up. Center speaker Front speaker Rear speaker Subwoofer 0

27 Setup Menu DVD Setup You can set up the DVD play. Displaying the DVD SETUP DVD SETUP DVD SETUP Set Set Adjusts the volume. Returns to the Control of the previous source. Calls the Sound Effects Menu. (see page 8) Calls the Setup Menu. Selects a disc menu language.* (See <Language Setup>, page ) Selects a subtitle language.* (See <Language Setup>, page ) Displaying the DVD SETUP DVD SETUP Set Off t Displays the Parental Lock.* ( OFF) (See <Parental Level Setup>, page ) y Turns the Continuous Group Play On or Off.* ( Off) When turned "Off", the play is stopped or the menu is displayed after the group play has ended. u Sets the DVD Audio disc play mode.* ( Off) When turned "On", a DVD Audio disc is played as the DVD Video disc. i Displays the DVD SETUP. D 8 Set 8 Selects an audio language. * (See <Language Setup>, page ) 8 Sets the dynamic range.* ( Wide) The dynamic range is reduced by changing from "Wide" to "Normal" and from "Normal" to "Midnight". You can easy to listen a small sound when the dynamic range is narrow. This is effective only when you are using a Dolby Digital software. 8 Off * Disabled when a DVD is being played. * Disabled when the Zone function is On. Displays the DVD SETUP. If or DVD SETUP Next is not shown, touch to display it. Prev. Displaying the DVD SETUP DVD SETUP 0 : LB Off 0 Off p Turns the Speaker Protect filter On or Off. ( On) Turn the Speaker Protect Filter "On" to protect speakers by cutting off the 0 khz and higher frequency (or 0 khz and higher frequency when the filter is "Off"). This function is effective when you are using a DVD Audio software having the khz or.khz sampling frequency. q Sets an angle mark display. ( On) w Selects the display mode.* ( :) ":": Displays wide pictures. ":(LB)": Displays wide pictures in the Letter Box format (having black stripes at the top and bottom of ). ":(PS)": Displays wide pictures in the Pan & Scan format (showing pictures cut at the right and left ends). e Displays the DVD SETUP. r Displays the DVD SETUP.

28 Setup Menu Language Setup Select a language you use for the speech and menus. Display the Language Setup See <Displaying the DVD SETUP > (see page ) and select a language you wish to use. Audio Language Set Enters a language code. Cancels the language setup and returns to the DVD SETUP. Clears the language code. Sets the original audio language. (It appears during audio language setup.) Sets the language and returns to the DVD SETUP. (It appears after you have entered a language code.) Enter a language code See the Language Code Table shown at right to select the desired language. Set the language you use Enter Language Code Table Abbreviation Language aa Afar ab Abkhazian af Afrikaans am Amharic ar Arabic as Assamese ay Aymara az Azerbaijani ba Bashkir be Byelorussian bg Bulgarian bh Bihari bi Bislama bn Bengali, Bangla bo Tibetan br Breton ca Catalan co Corsican cs Czech cy Welsh da Danish de German dz Bhutani el Greek en eo Esperanto es Spanish et Estonian eu Basque fa Persian fi Finnish fj Fiji fo Faroese fr French fy Frisian ga Irish gd Scots Gaelic gl Galician gn Guarani gu Gujarati ha Hausa hi Hindi hr Croatian hu Hungarian hy Armenian ia Interlingua ie Interlingue ik Inupiak in Indonesian is Icelandic it Italian iw Hebrew ja Japanese ji Yiddish jw Javanese ka Georgian kk Kazakh kl Greenlandic km Cambodian kn Kannada ko Korean ks Kashmiri ku Kurdish ky Kirghiz la Latin ln Lingala lo Laotian lt Lithuanian Abbreviation lv mg mi mk ml mn mo mr ms mt my na ne nl no oc om or pa pl ps pt qu rm rn ro ru rw sa sd sg sh si sk sl sm sn so sq sr ss st su sv sw ta te tg th ti tk tl tn to tr ts tt tw uk ur uz vi vo wo xh yo zh zu Language Latvian, Lettish Malagasy Maori Macedonian Malayalam Mongolian Moldavian Marathi Malay Maltese Burmese Nauru Nepali Dutch Norwegian Occitan (Afan) Oromo Oriya Punjabi Polish Pashto, Pushto Portuguese Quechua Rhaeto-Romance Kirundi Romanian Russian Kinyarwanda Sanskrit Sindhi Sangho Serbo-Croatian Singhalese Slovak Slovenian Samoan Shona Somali Albanian Serbian Siswati Sesotho Sundanese Swedish Swahili Tamil Telugu Tajik Thai Tigrinya Turkmen Tagalog Setswana Tongan Turkish Tsonga Tatar Twi Ukrainian Urdu Uzbek Vietnamese Volapuk Wolof Xhosa Yoruba Chinese Zulu Parental Level Setup Sets a parental level. Display the Parental Level code number Set (P y) Enters a code number. Cancels the current setup and returns to the DVD SETUP. Clears the code number. Displays the present parental lock level. Determines the code number and displays the Parental Level Setup. Enter the code number 0 The number you enter first is set as your code number. You can clear the password by pressing the Reset button. Level Display the Parental Level Setup Code Number Cancel **** Level 8 0 Clear Enter Enter Sets a parental level. Returns to the DVD SETUP. Set a parental level Enter the parental level setup Return Return If a disc has a higher parental lock level, the audience needs to enter the code number. The parental lock level varies depending on a loaded disc. If a disc has no parental lock, any audience can play it back even when you have set the parental lock.

29 Setup Menu System Setup You can set up the system parameters. Displaying the System Adjusts the volume. Returns to the Control of the previous System Set Up source. System Calls the Sound Effects Menu. (see page 8) Calls the Setup Menu. System Turns the key touch tone On or Off. ( On) Off Allows scrolling of text display on the Source Control. ( Auto) 0 "Auto": Scrolls the automatically. "Manual": Allows you to scroll the manually. On Off Selects a remote control signal. If you turn it "Off", your operation from the remote controller is rejected when you are in the TV mode. 8 8 Displays the System. If or System Set Up Next is not shown, touch to display it. Prev. Displaying the System Selects an illumination color of receiver keys. ( Red) "Green" Green "Red" Red p Selects an illumination color of the Small Display. ( Blue) "Blue": A blue color display "Key Sync": The same color as the this unit button illumination color q Flashes the burglar alarm lamp if the protection panel is removed. ( On) w Sets a music CD playback. ( ) "" Automatically recognizes and plays back an MP/WMA disc, a DVD or a music CD. "" Forcibly plays back a disc as a music CD. Select "" if you wish to play a music CD having a special format or if you cannot play a disc in the "" position. You cannot play an MP/WMA/VCD disc in the "" position. Also, you may not play some music CDs in the "" position. Your setup is disabled when the disc is being played. e Displays the System.

30 Setup Menu AV Interface You can set audio and visual (AV) interface parameters. Displaying the AV I/F AV I/F AV Interface 8 Normal 8 Adjusts the volume. Returns to the Control of the previous source. Calls the Sound Effects Menu. (see page 8) Calls the Setup Menu. Selects a navigation system connection. ( RGB) "RGB" Allows the Kenwood s Navigation System to connect via its interface cable. "AV-IN": Allows a third-party navigation system to connect via the AV INPUT port. "OFF" Must be used if no navigation system is connected. (The navigation display is cancelled when the AV source is switched.) Sets a name to be displayed when you select a system that is connected via the AV INPUT port. ( VIDEO) Displaying the AV I/F AV I/F 0 L 0 p Selects an AV source to be output at the AV OUTPUT port. ( TV) q Selects speakers used for voice guidance of the navigation system. ( Left) "Left" Uses the front left side speaker for voice guidance. "Right": Uses the front right side speaker for voice guidance. "Front All": Uses both front speakers for voice guidance. w Adjusts the volume for voice guidance of the navigation system. ( ) e Adjusts the volume for voice guidance of the navigation system. ( On) When turned "On", the volume level drops for voice guidance. r Displays the AV I/F. If you have set the navigation system connection to "AV IN", the display is fixed to "NAV". Sets an image display of the system that is connected via the AV INPUT port. ( Normal) "Normal": When the image source is switched, an image entered via the AV INPUT port is displayed. "AUTO": When an image signal is entered via the AV INPUT port, this image is displayed. "R-ViewCAM": An image entered via the AV INPUT port is displayed when the shift lever of the car is placed in the Reverse position. 8 Sets a name to be displayed when you select an image of the system that is connected via the AV INPUT port. ( VIDEO) If you have selected the "R-ViewCAM" display for the AV INPUT port, the "R-ViewCAM" is always selected. Displays the AV I/F. If or AV Interface Next is not shown, touch to display it. Prev. 8

31 Setup Menu User Interface You can set up user interface (IF) parameters. Displaying the User I/F User I/F User Interface Adjusts the volume. Returns to the Control of the previous source. Calls the Sound Effects Menu. (see page 8) Calls the Setup Menu. Selects a background color of the Source Control. ( No Change) If you select the "Auto Change", the background color is gradually changed automatically. Turns the background motion picture of the Source Control On or Off. ( On) Displaying the User I/F User I/F y Turns the information display On or Off when a button is touched on the Source Control. ( On) u Sets a point display when you touch the. ( Pattern) You can select "Pattern", "Pattern" or "OFF". i Displays the User I/F. 8 8 Selects a frame pattern. ( Pattern) You can select "Pattern" or "Pattern". 8 Turns the saver On or Off on the Source Control. ( On) If you turn it "On" and if you do not operate within one minute, the saver starts. The saver is canceled when the is touched. 8 Displays the User I/F. If or User Interface Next is not shown, touch to display it. Prev. Displaying the User I/F User I/F On Screen DVD Auto 0 p Sets an on- display of the navigation. ( Auto) If you set to "Auto", an information is displayed for seconds when updated. q Sets an on- display of the TV. ( Auto) If you set to "Auto", an information is displayed for seconds when updated. w Sets an on- display of the video playback. ( Auto) If you set to "Auto", an information is displayed for seconds when updated. e Sets an on- display of the DVD playback. ( Manual) If you set to "Auto", an information is displayed for seconds when updated. r Displays the User I/F. t Displays the User I/F. 0

32 Setup Menu Touch Panel Adjust You can adjust the touch panel operations. Display the Touch Panel Adjust If or Touch Next Touch is not shown, touch to display it. Prev. Touch the center of left lower and right upper when requested. Clock Adjustment Security Code Setup You can set a security code to protect your receiver system against theft. When the Security Code function is activated, the code can't be changed and the function can't be released. Note, the Security Code can be set as the digit number of your choice. Display the Security Code Setup Enters a security code. Clears your entry. Cancels the registration and returns to the Security Code Setup. Enters the security code. Enter a security code Input a four-digit number. 0 Adjusts the clock time Security Register your security code Set Display the Clock Screen Clock If or Security Next is not shown, touch to display it. Prev. Enter Adjusts the volume. Returns to the Control of the previous source. Calls the Sound Effects Menu. (see page 8) Calls the Setup Menu. Allows you to start touch panel adjustment. If or Clock Next is not shown, touch to display it. Prev. 8 Set Reenter the security code Reenter the same security code as that you have entered in Step for confirmation. If you enter a different security code, the returns to Step (for the first code entry). Register the security code again Start to adjust the touch panel Set Cancel Reset Cancels the adjustment and returns to the Touch Panel Adjust. Resets to the initial status. Adjusts the volume. Returns to the Control of the previous source. Calls the Sound Effects Menu. (see page 8) Calls the Setup Menu. Clock time display. Adjusts hours. Adjusts minutes. 8 Sets "00" minute. Setup examples: :00~: :00 :0~: :00 Sets the clock time in synchronous with the time data sent from the RDS station. <Function of KVT- DVD (PAL TV type)> ( On) When turned "On", the synchronous mode starts and the clock cannot be adjusted manually. Off Adjusts the volume. Returns to the Control of the previous source. Calls the Sound Effects Menu. (see page 8) Calls the Setup Menu. Allows you to start security code registration. If you have already completed the code Set registration, the is not displayed. Start the security code registration PassWord Set **** st Cancel Your security code has been registered. If you press the Reset button or if you disconnect your Receiver from the battery after the code registration, you need to enter the registered security code. See below for details. If you have pressed the Reset button or if you have disconnected the Receiver from battery... Enter the correct security code You must enter the same security code as that you have entered in Step above. Enter the security code 0 Enter Adjust the clock time 8 0 Clear Enter Enter Now, you can use your Receiver.

33 Setup Menu TV Setup <Function of KVT-DVD (PAL TV type)/dvd/dvd> The TV signal receiving areas can be set. Displaying the TV Area Set Up TV Area Set Up TV Set Up Adjusts the volume. Returns to the Control of the previous source. Calls the Sound Effects Menu. (see page 8) Calls the Setup Menu. Sets the present TV receiving area. Displays the TV Area Set Up. If or TV Set Up Next is not shown, touch to display it. Prev. RDS Setup <Function of KVT-DVD (PAL TV type)> The related RDS parameters can be set. Displaying the RDS Set Up RDS Set Up RDS Set Up Regional On On 8 Adjusts the volume. Returns to the Control of the previous source. Calls the Sound Effects Menu. (see page 8) Calls the Setup Menu. Sets a news bulletin interrupt time. Turns the Alternative Frequency function On or Off. ( On) Turns the Region Restriction function On or Off. ( On) 8 Turns the Auto TP Seek function On or Off. ( On) Displays the RDS Set Up. If or RDS Set Up Next is not shown, touch to display it. Prev. Displaying the TV Area Set Up Sets the present TV receiving area. 8 Displays the TV Area Set Up. Displaying the RDS Set Up p Selects a display language for the PTY function. q Displays the RDS Set Up. TV Area Set Up RDS Set Up 0 0 8

34 Setup Menu AMP Control Sets the power amp connected via the LX bus. Displaying the AMP Control AMP Control 8 Adjusts the volume. Calls the Setup Menu. Calls the Sound Effects Menu. (see page 8) Returns to the Control of the previous source. Setup option and value display Select a setup option. Selects a set value. 8 Enters the set value. If is not shown, touch Prev. or Next to display it. For the model name of amp you can control from the system, see the amp s catalog. For the options and values you can change and for the amp s operation when changed, see the amp s instruction manual.

35 Sound Effects Menu Sound Effects Menu You can set up the receiver sound effects. Displaying the Control Audio Control You can adjust the front and rear and right and left audio balance. Displaying the Audio Control Adjusts the volume. Control Audio Control Audio Control Returns to the Control of the previous source. Calls the Setup Menu. (see page ) Calls the Sound Effects Menu. Adjusts the right and left volume balance. Adjusts the front and rear volume balance. IN You can display the same Sound Effects Menu on the Control of any source. FAD F BAL R Sub Woofer - 8 Adjusts the volume of the present source based on the difference level of original volume. 8 Adjusts the subwoofer volume. If you have increased the volume first, then reduced it using the "Vol. Offset", the big sound may suddenly be generated when you switch to another source. Displaying the Sound Effects Menu Adjusts the volume. Calls the Sound Effects Menu. Recalls the previous Sound Effects Menu. Sound Effects Calls the Setup Menu. (see page ) Returns to the Control of the previous source. Position Your setup on the <Sound Effects Menu> is adjusted automatically according to your <Audio Set Up> (see page ) on the Setup menu. We recommend you to complete the <Audio Set Up> first, then set up the <Sound Effects Menu>. Zone Control 8

36 Sound Effects Menu SFC SFC Adjustment Adjust the sound field You can set up the sound field. Displaying the SFC SFC SFC MENU Concert Hall Stream Information Dolby Digital khz Adjust Adjusts the volume. Returns to the Control of the previous source. Calls the Setup Menu. (see page ) Calls the Sound Effects Menu. Sets a sound field. You can select any of the following sound fields. "Bypass" "Stadium" "Concert Hall" "Live House" "Theater" "Disco" "Club Disco" "Jazz Club" "Studio" "Listening Room" "Church" "Bypass+Center" "Dolby PL II Music" "Dolby PL II Movie" "Dolby PL II Matrix" You can adjust the sound field. Display the SFC Adjustment SFC Adjust Adjust Center Level Mid Adjusts the volume. Sets a sound field effects level. Adjusts the bass boost level of the rear speaker. Adjusts the volume level of center speaker. Enters your setup and returns to the SFC Control. Return Exit the sound field adjustment Return Displays the present source information. The stream (Dolby Digital, dts, Linear PCM, Packed PCM, MPEG or MP/WMA), input channels (front or rear channels), and sampling frequency are displayed. Displays the SFC Adjustment. (See <SFC Adjustment>, page ) If you select "Dolby PL II" when selecting a source other than the built-in player, the play of DVD source is stopped. When you have selected the TV or TUNER source and when you set the Dolby PL, we recommend you to select the "Dolby PL II Matrix" mode. If you select another Dolby PL mode, the sound is NOT output from rear speakers when you receive monaural broadcasting sounds. If the sound field of "Dolby PL II Music" has been set: Sets the surround position by adjusting the front and rear volume balance. Sets the vocal image position by adjusting the right and left vocal volume level. 8 Turns the Panorama mode On or Off. 8 Off You cannot use the <SFC Adjustment> during playback of a.-channel source, "dts", or "Dolby Digital". You cannot use the <SFC Adjustment> when the sound field of "Dolby PL II Movie", or "Dolby PL II Matrix" has been set. 0

37 Sound Effects Menu Equalizer Parametric Equalizer Set a Q value You can set up the equalizer. Displaying the Equalizer Equalizer Equalizer Flat Normal P-EQ T 8 8 Adjusts the volume. Returns to the Control of the previous source. Calls the Setup Menu. (see page ) Calls the Sound Effects Menu. Adjusts the bass boost of the B.M.S power amplifier (optional accessory). You may not set some models of power amp boost to "+8". See the catalog or instruction manual of power amplifier. Set the center frequency of bass boost you have set for the "Amp Bass". If you set it to "Low", the center frequency is dropped for 0 to 0%. Displays the Parametric Equalizer. (see page ) You can adjust the value set for the Equalizer Curve Type. 8 Selects an equalizer curve type. You can select any of the following equalizer curves. "NATURAL" "ROCK" "TOP 0" "DANCE" "VOCAL" "CLASSIC" You can Manually set the equalizer curve by adjusting the center frequency, gain and Q value. Display the Parametric Equalizer Frq 80Hz +db Q.0 Band Gain P P-EQ P P Adjusts the volume. Select a band to be adjusted. Sets a frequency. Sets a gain level. 8 Sets a Q value. Store the present equalizer curve in memory, or calls it from memory. 0 Exits the Parametric Equalizer setup and returns to the Equalizer. Select a frequency band you wish to adjust Q- Return 8 0 Q+ To store the equalizer curve in memory: Continue to touch P to P more than seconds. To call the equalizer curve from memory: Touch P to P of the equalizer curve you wish to call from memory. When you call an equalizer curve, its type is shown as "USER#". Q- Store or call the equalizer curve into/from memory P P Close the Parametric Equalizer Return Q+ P P Band Band You can adjust the following frequency bands. 0, 80, 00, 0, 0, 00, 0 Hz, 00, 00, 0, 800, k Hz.k,.k, k,.k,.k, k Hz k,.k, 8k, 0k,.k, k Hz Set a center frequency Set a gain

38 Sound Effects Menu Position Position Fine Control Set a delay time You can adjust the sound effects according to your listening position. Displaying the Position Position Adjusts the volume. Returns to the Control of the previous source. Calls the Setup Menu. (see page ) You can fine-adjust your listening position. Display the Position Fine Control Adjust Position Fine Control Store or call your adjustment into/from memory To store your adjustment in memory: Position just FRONT R P P P Calls the Sound Effects Menu. Sets a listening position. You can select any of "FRONT R" (Right front), "FRONT L" (Left front), "FRONT ALL" (All front), and "ALL" (All) positions. Displays the Position Fine Control. (see page ) Call your setup you have stored in memory from the Position Fine Control. cm cm P P Continue to touch P to P more than seconds. To call your adjustment from memory: P P P The final distance is adjusted to the total of Car Type Set Up value (see page ) and Position Setup (both Position and Position Fine Control) value. If you change the Car Type Set Up value (see page ), the position is set to "ALL". Adjusts the volume. Selects a speaker to be adjusted. Indication of setup distance. The adjusted distance (Position and Position Fine Control values), and the total of the distance adjusted by Car Type Set Up (see page ) and the adjustment distance for position setup are indicated. Adjust the distance to each speaker. Stores the present adjustment setup in memory, or calls it from memory. Exits the Position Fine Control setup and returns to the Position. Touch P to P of your adjustment you wish to call from memory. You can also call your adjustment setup in memory using P to P buttons on the Position (see page ). Only the adjusted distance of position setup (Position and Position Fine Control values) is stored in memory. Therefore, the final adjustment distance changes if you change the Car Type Set Up value (see page ). Select a speaker you wish to adjust Close the Position Fine Control Screen Return Center speaker Left front speaker Right front speaker Left rear speaker Right rear speaker Subwoofer

39 Sound Effects Menu Zone Control You can set the front and rear audio source. Displaying the Zone Control Zone Control Zone Control Area 8 Reverse Fron DVD Rear Rear Adjusts the volume. Returns to the Control of the previous source. Calls the Setup Menu. (see page ) Calls the Sound Effects Menu. Turns the Zone Function (that sets different source sounds for front and rear speakers) On or Off. When turned On, Front and Rear are shown. Adjust the front and rear audio balance. (This button appears when the Zone function is On.) When the Zone function is turned On, this button appears on the all Source Control. Sets the front and rear audio source separately. (This button appears when the Zone function is On.) When the rear speaker sound is switched, the audio source that is output at the AV OUTPUT terminal is also switched to the same source. However, if you have set the "Area" to "Reverse", the audio source that is output at the AV OUTPUT terminal is switched depending on the front sound source. 8 Switches the front and rear audio sources. (This button appears when the Zone function is On.) Use "Reverse" to change over the front and rear audio sources.

40 Hands-Free Unit Control GSM control When called When dialing You can call the following control s if the GSM is connected to the system. Displaying the Control GSM Control Or the telephone is called. AUTO 0 Displays the Search for Phone Book. (See the <Calling by Phone Book>, page 80) Adds a number to the Phone Book. (See the <Addition to Phone Book>, page 8) Displays the Create a Mail. (See the <Creating an SMS (Short Message Service) messages>, page 8) Displays the SMS list. (See the <Reading SMS (Short Message Service) messages>, page 8) When you are called, you can use the handsfree phone. Respond to a phone call When the telephone is called, the GSM Control appears automatically. Terminate the phone call Originate a call by entering a phone number. Enter a phone number 0 Originate a call You can start talking when the destination responds. SetUp * + 0 # Clear 8 Return Displays the Hands-Free Call Setup. (See the <Hands Free Setup>, page 8) Enter three phone numbers for quick dialing. (See the <Quick Dialing>, page 8) Enters a phone number. (See the <When dialing>, page ) 8 Clears the entered phone number. All numbers you have entered are cleared if the button is pressed more than second. The previous reappears. Terminate the phone call The previous reappears. Starts the hands-free phone call. p Displays the previously called phone number. q Ends the hands-free phone call. w Returns to the previous. e Displays the radio wave intensity r Displays the present Auto Response status t Indicates the SMS registration availability y Displays the calling and called phone numbers If you have registered a phone number in the Phone Book, the destination person name is displayed. For details on the hands-free phone calls, see the Instruction Manual of KCA-HF GSM Hands-Free Unit (optional). 8

41 Hands-Free Unit Control Calling by Phone Book You can call a person using his/her phone number that you have registered in the Phone Book. Display the Search for Phone Book The Initial Input appears. Initial Input Aa Type Switches the character type. Scrolls the character array display. Displays the Phone Book beginning with the name whose first character you have touched. A S Y etc. The Phone Book List appears. T Z U, Select the initial character of a person name in memory V. W! X? AUTO Return Phone Book List Scrolls the list. Enters the destination (called party) name. Displays the destination data edit. (See the <Editing the Phone Book>, page 8) Clears the destination if this button is touched more than seconds. Enters the destination data and returns to the GSM Control. Returns to the GSM Control. The GSM Control appears again. The selected destination data is displayed. Originate a call Kenwood Kenwood Select a destination you wish to call Kenwood Select a destination you wish to call OK AUTO Edit Clear OK Return Addition to Phone Book You can add a phone number to the Phone Book. Enter a phone number you wish to register 0 + Device Select Start phone number registration + Registers a phone number in the SIM card. Registers a phone number in the GSM system itself. Returns to the GSM Control. AUTO Return Select a memory device in which you wish to register phone data When you select the device, the Name Edit appears. Name Edit Screen SIM CARD O Space Aa Type S Y T Z IN MEMORY U, Shifts the cursor. Enters a space. Switches the character type. The digits, accent and extended code characters, and alphabets are switched each time it is pressed. Scrolls the keyboard display. Enters a character. Clears the character. All entry characters are cleared if this key is touched more than second. Enters the entry characters. 8 Returns to the Device Select. V. W The extended code characters are displayed only when a cellular phone supporting the GSM alphabets is connected. Each of extended code characters (^, {, }, \, [, ],,, ) occupies a two-character memory space when registered.! X? Clear OK 8 Return Enter a name You can start talking when the destination responds. Terminate the phone call A etc. Register the name The previous reappears. OK The name has been registered. 80 8

42 Hands-Free Unit Control Editing the Phone Book Register the phone number Quick Dialing Hand Free Setup You can edit data you have registered in the Phone Book. Select an item you wish to edit See the <Calling by Phone Book> (see page 80) and select an item you wish to edit on the Phone Book List. Start editing The Edit Phone Number appears. Edit Phone Number ("TEL Number Edit") TEL Num Kenwood Kenwood Kenwood EDIT AUTO AUTO Edit Clear OK Return The phone number is registered, the Edit Name ("Name Edit") appears. Edit Name ("Name Edit") OK O Space Aa Type S Y T Z U, Shifts the cursor. Enters a space. Switches the character type. The digits, accent and extended code characters, and alphabets are switched each time it is pressed. Scrolls the keyboard display. Enters a character. Clears the character. All entry characters are cleared if this key is touched more than second. Enters the entry characters. 8 Returns to the Edit Phone Number ("TEL Number Edit"). V. W! X? Clear OK 8 Return You can register up to phone numbers for quick dialing. To register a phone number: Display a phone number you wish to register See the <Calling by Phone Book> (see page 80) and <When dialing> (see page ). Register the phone number P Continue to touch more than seconds. To call a phone number from memory: P P P Only a phone number can be registered for Quick Dialing. Therefore, the destination subscriber name and others are not displayed during dialing. The hands-free system can be set as follows. Display the SMS SetUp SetUp Hands Free Set Up Hands Free Set Up Auto Response Time MIC Sense Phone Voice 0 sec Sets an automatic response time after call termination. Adjusts the microphone sensitivity. Sets a ringing tone output position. "FL": Outputs the tone from the front left-hand side speaker. "FR": Outputs the tone from the front right-hand side speaker. Synchronizes the GSM with the Phone Book of optional KCA-HF unit. Synchronizes the GSM with the SMS of optional KCA-HF unit. Returns to the GSM Control. FL Book SMS Sync FR Sync AUTO Return * + 0 # Clear OK Return The extended code characters are displayed only when a cellular phone supporting the GSM alphabets is connected. Each of extended code characters (^, {, }, \, [, ],,, ) occupies a two-character memory space when registered. Enter a name The "Phone Voice" of both "FL" and "FR" can be turned On at the same time. But they cannot be turned Off at the same time. Enters a phone number. Clears the input phone number. All entry number are cleared if this key is touched more than second. Returns to the Phone Book List. Enters the phone number. A etc. Register the phone number Enter a phone number OK 0 The editing completes and the Phone Book data is updated. 8 8

43 Hands-Free Unit Control Reading the SMS (Short Message Service) messages You can display messages received by the SMS. Display the BOX Message List BOX Message List Displays messages. Scrolls the message list. Returns to the GSM Control. Select a message you wish to display The message is displayed on the Box Message. BOX Message BOX Message List 0/0/ /0/0 80 0/08/0 : 80 0/0/0 :0 80 0/0/0 0: 08 AUTO AUTO Return Clear Creating an SMS (Short Message Service) message You can create a message to be sent by the SMS. Enter the destination number where you wish to send an SMS message Display the SMS Message Input SMS Message Input 0 O Space Aa Type Shifts the cursor. Switches the character type. The digits, accent and extended code characters, and alphabets are switched each time it is pressed. Enters a space. Scrolls the keyboard display. Enters a character. Clears the character. All entry characters are cleared if this key is touched more than second. Displays the "Select a Library Sentence". 8 Sends the created message. Returns to the GSM Control. Create a message R S T U V W X Y Z,.!? 8 Clear Library Return Returns to the GSM Control. The extended code characters are displayed only when a cellular phone supporting the GSM alphabets is connected. Each of extended code characters (^, {, }, \, [, ],,, ) occupies a two-character memory space when registered. Selecting a sentence from library Send the message Display the SMS Library Text Library SMS Library Text SMS Library Text ABCDE HIJKLM OPQRSTU VWXYZ Selects a sentence from the library. Scrolls the library text. Edits the sentence selected from the library. Enters the selected sentence and returns to the SMS Message Input. Returns to the SMS Message Input. Select a library text ABCDEFG AUTO Edit OK Return Editing the library text EDIT The SMS Library Edit appears. SMS Library Edit AUTO Aa Type Space Shifts the cursor. Switches the character type. The digits, accent and extended code characters, and alphabets are switched each time it is pressed. Enters a space. Scrolls the keyboard display. Enters a character. Clears the character. All entry characters are cleared if this key is touched more than second. Quits editing and returns to the SMS Library Text. The extended code characters are displayed only when a cellular phone supporting the GSM alphabets is connected. Each of extended code characters (^, {, }, \, [, ],,, ) occupies a two-character memory space when registered. Up to 80 characters can be registered in one library. Up to libraries can be registered. R S T U V W X Y Z,.!? Clear Return Return Scrolls for a single message. Clears the message if this button is touched more than seconds. Returns to the BOX Message List. A etc. You can also select a message from the sentence library. See <Selecting a sentence from library> given below. Register the library text OK The SMS Message Input appears again. 8 8