dynamic seat, driver dynamic seat, passenger Set level for Set level for Activate easy-entry/exit for exterior rear view mirror Set automatic locking

Transcription

1 The table below shows what settings can be changed within the various menus. Detailed instructions on making individual settings can be found on the following pages. INSTRUMENT CLUSTER TIME/DATE LIGHTING VEHICLE CONVENIENCE DYNAMIC SEAT* Select speedometer display mode Synchronizing the time Set daytime running lamp mode (USA only) Set automatic locking Activate easy-entry/exit feature Select language Set time (hours) Set locator lighting Set parking position for exterior rear view mirror Select display (speed display or outside temperature) for status line Select display (speed display or outside temperature) for basic display Set time (minutes) Ambient lighting Set date (month) Setting headlamps delayed shut-off Set date (day) Setting interior Set date (year) lighting delayed shut-off Set level for dynamic seat, driver Set level for dynamic seat, passenger 165

2 Instrument cluster submenu Access the Instr. cluster submenu via the Settings menu. Use the Instr. cluster submenu to change the instrument cluster display settings. The following functions are available: Function Page Select speedometer display mode 166 Select language 166 Select display (speed display or outside temperature) for status display Select display (speed display or outside temperature) for basic display 166 Selecting speedometer display mode cluster until the message Display unit Speed-/odometer appears in the multifunction display. Press button æ or ç to set speedometer unit to km or miles. Selecting language cluster until the message Language appears in the multifunction display. the language to be used for the multifunction display messages.

3 Available languages: German (Deutsch) English (English) French (Français) Italian (Italiano) Spanish (Español) Dutch (Nederlands) Danish (Dansk) Swedish (Svenska) Portuguese (Português) Turkish (Türkçe) Selecting display (speed display or outside temperature) for status display cluster until the message Status line display appears the status line to Speed or Outside temp.. Controls in detail i You will see the status indicator when you have called up a different display from the standard display. Selecting display (speed display or outside temperature) for basic display cluster until the message Basic display appears the display permanently shown in the multifunction display.

4 Time/Date submenu Access the Time/Date submenu via the Settings menu. Use the Time/Date submenu to change the time and date display settings. The following functions are available: Function Page Synchronizing the time 168 Set time (hours) 168 Set time (minutes) 169 Set date (month) 169 Set date (day) 169 Set date (year) 170 i Information on setting the time, refer to separate COMAND instructions. 168 Synchronizing the time This function can only be seen on vehicles with COMAND and navigation module*. until the message Time sync. with head unit appears in the multifunction display. the desired Set time (hours) This function can only be seen when time synchronization is switched off. until the message Clock, hours appears The selection marker is on the hour hours. Confirm by pressing reset button ( page 150).

5 Set time (minutes) This function can only be seen when time synchronization is switched off. until the message Clock, minutes appears The selection marker is on the minute minutes. Confirm by pressing reset button ( page 150). Set date (month) until the message Set date month appears The selection marker is on the month month. Controls in detail Set date (day) until the message Set date day appears The selection marker is on the day day. 169