THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS AND ACCESSORIES BOOKLET

Size: px
Start display at page:

Download "THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS AND ACCESSORIES BOOKLET"

Transcription

1 THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS AND ACCESSORIES BOOKLET

2 THE SKALAR CONTINUOUS FLOW ANALYZERS COMPONENTS AND ACCESSORIES BOOKLET The SAN plus Analyzer logo Please read the following information about this booklet:- When placing an order always include the catalog number and the description of the required item. For a description of the terms and conditions for ordering please contact your local representative or Skalar's Headquarters in the Netherlands. Each item is supplied individually unless otherwise stated. For all fuses see your user manual. For any item not included in this booklet please contact your local representative or Skalar's Headquarters in the Netherlands. Skalar reserves the right to change specifications and appearance of the equipment without further notification. On page 3 Table of contents these symbels are buttons click on the number to go directly to the corresponding page To go directly to the ʻTable of contentsʼ click on the gray area on either side of the page. Publication No: G. US Issue date: November 2008 Copyright Skalar P.O. Box DE BREDA The Netherlands Tel: + 31 (0) info@skalar.com Fax: + 31 (0) Internet:

3 TABLE OF CONTENTS Page No. + Button Section 1: Samplers and accessories 1.1 Samplers Sample and standards containers Sample and standards racks Sample needles, wash vessels & accessories Motors and accessories General sampler accessories Section 2: Chemistry units and standard components 2.1 Chemistry units Accessories for chemistry units Pump and accessories Chemicals and reagents Section 3: Chemistry module components 3.1 Standard module components Clamps Manifolds Glass coils Heat exchangers and accessories Reactors and accessories Dialyzers and accessories Miscellaneous module components Section 4: Tubing, needles and nipples 4.1 Pump tubing tygon 3 color bridges Pump tubing silicon 3 color bridges Pump tubing solvent flex 3 color bridges Pump tubing acid flex 3 color bridges Pump tubing tygon 2 color bridges Pump tubing silicon 2 color bridges Pump tubing solvent flex 2 color bridges Pump tubing acid flex 2 color bridges Tubing Sleeves Needles, nipples and tubing connector Section 5: Photometers, detectors and meters 5.1 Photometers Accessories for photometers UV photometer and accessories Ion selective electrode and accessories Other detectors and meters plus accessories Flow cells Filters Section 6: Data handling 6.1 Software Analogue interface Digital interface Section 7: Supplements and accessories 7.1 Rinsing valves and accessories Distillation unit and accessories Digester unit and accessories Block digester and accessories Othere supplements Numerical appendix

4 1.1 Samplers Section 1: Samplers and accessories SA 1100/1150 SA 1050/1053 SA 1100 Sampler digital, 50 or 100 positions 220/240 V, 50 Hz or 110/120 V, 60 Hz SA 1050 Sampler random access 140 positions 220/240 V, 50 Hz or 110/120 V, 60 Hz SA 1150 Sampler digital, 4th digit timing 50 or 100 positions 220/240 V, 50 Hz or 110/120 V, 60 Hz SA 1053 Sampler random access, dual needle, 2 x 70 positions 220/240 V, 50 Hz or 110/120 V, 60 Hz SA 1074 SA 1075 SA 1074 Sampler random access 300 positions 220/240 V, 50 Hz or 110/120 V, 60 Hz SA 1075 Sampler random access 540 positions 220/240 V, 50 Hz or 110/120 V, 60 Hz 1.2 Sample and standards containers SA 1020 SA 1021 SA 1022 SA 1023 Sample cups 2.0 ml Polystyrene 1000 pcs. Sample cups 1.5 ml Polystyrene 1000 pcs. Sample cups 3.5 ml Polystyrene 1000 pcs. Sample cups 8.5 ml Polystyrene 1000 pcs. 4

5 1.2 Sample and standards containers, continued SA 1025 SA 1026 SA 1027 SA 1030 Sample cups 3.5 ml Polypropylene 1000 pcs. Sample cups 8.5 ml Polypropylene 1000 pcs. Sample cups 3.5 ml Polyethylene 1000 pcs. Sample cups 3.5 ml Polystyrene red 1000 pcs. SA 1032 SA 1033 SA 1034 SA 1036 Sample cups 3.5 ml Polystyrene green 1000 pcs. Sample tubes 10 ml polystyrene 1000 pcs. Sample tubes 30 ml and screw caps 1000 pcs. Sample tubes 10 ml glass 300 pcs. SA 1037 SA Sample cup glass 5 ml Sample caps for SA1020/ 21/22/25/27/30/ pcs. Standards container 35 ml with cap for SA 1050/ 1053/1074 sampler 40 pcs. Container glass 30 ml for standards, SA 1050/1053/ 1074 samplers 12 pcs Container for standards SA Container rack complete with 35 ml containers for SA 1050/ 1053 sampler 5

6 1.3 Sample and standards racks Dust cover for cup plate SA 1000 Cup plate for SA 1000 Sample rack 28 sample positions for SA 1050 Sample rack 35 positions for SA B Sample rack, StSt., 2 x 35 positions for SA 1053 Sample rack 35 positions for use with SA 1034 cups on SA 1050 Rack for standards containers for SA 1070 Rack 60 sample positions for SA pcs Rack 24 samples positions for SA pcs. Rack for 30 standards containers, complete for SA 1070 Sample needle extension set for SA 1070 Risers for sample rack 20 pcs Holder and 40 standard containers of 35 ml for SA 1074 Sample rack 60 positions, for sampler for SA 1074 Exchange set to use other sample racks for SA 1074 Rack for 26 standards containers, complete for SA Sample rack 60 positions, for sampler for SA 1075 Standards insert for cup plate Cup plate 80 sample and 10 standards positions for SA 1100/1150 Cup plate 100 sample and standards positions for SA 1100/1150 6

7 1.3 Sample and standards racks, continued B Dust cover for cup plate SA 1100/ Sample needles, wash vessels and accessories SA 1011 SA 1012 SA 1013 SA 1014 Sample needle standard for SA 1000/1100 Sample needle small for SA 1000/1100 Sample needle Pt/Ir for SA 1000/1100 Sample needle for SA 1006/1070 SA 1015 SA 1016 SA 1017 SA 1018 Sample needle and anti cup lift for SA 1000 Sample needle Pt/Ir for SA 1006/50/70/74 Sample needle for SA 1100/1150 Sample needle for SA 1006/50/70/ Holder for rinsing vessel for SA 1000 Sample needle holder for SA 1000 Rinsing vessel PTFE for SA 1000 Mounting screw needle holder for SA 1000/50/70/74 7

8 1.4 Sample needles, wash vessels and accessories, continued Rinsing vessel for SA 1000 Needle holder for SA 1050 Rinsing vessel holder for SA 1050/53 Sample needle for SA 1053 sampler (2 required for one sampler) Rinsing vessel for two needles on SA 1053 Purge needle for mixing device Rinsing vessel glass for SA 1050/1070/74/75 Rinsing vessel glass for 2/3 needles for SA Sample needle holder for SA 1070 Needle guide on SA 1074 for one needle Needle holder for 1 needle for SA 1074 Needle guide for one needle for SA Sample needle for SA 1075 sampler Purge needle for mixing device SA 1075 sampler 8

9 1.5 Motors and accessories SA Pump head for rinsing pump for SA 1000/1003/1006 SA 1100/1150 Pulley Z cable for SA 1050/53 Z Cable for SA 1050/53 Spring for Z cable for SA 1050/ Rinsing pump with motor 20 rpm for SA 1050/53/74 Rinsing pump for SA 1070 Motor for rinsing pump SA 1050/53, 20 rpm Motor for rinsing pump SA 1000 and SA 1100/ Motor for rinsing pump SA 1070 Sample arm SA 1000 and SA 1100/50 Motor for sample tray rotation SA 1000 Motor for rinsing pump SA 1050/53 Motor for Z movement SA 1050/53 and X movement SA Motor for R movement SA 1050/53 Motor for Y movement SA 1050/53/70 and Y/Z movement SA 1074 Valve block for diluter. SA 1050 up to serial No SA 1074 up to serial No Valve block for diluter. SA 1050 from serial No SA 1074 from serial No

10 1.6 General sampler accessories SA 1024 SA 1060 SA 1061 SA 1080 Filette sample filter system 1000 pcs. Pump tubing, rinsing pump for SA 1000/03/06 SA 1050/74 / SA 1100/50 8 pcs. Pump tubing rinsing pump for SA pcs. Sample valve set for extension 40 to 80 samples for SA 1000 SA Tubing for diluter with screw and seal 2 pcs. Tubing clamp wash pump for SA 1000 Plunger complete for Z-cable SA 1050/53 Tubing holder for SA 1050/ Cover Plate Valves for SA 1050/53 Cover Plate Diluter for SA 1050/53 Needle guide for SA 1050 Needle guide, Hastelloy, for SA Auto diluter station for SA 1050 Eprom V. 5.2 and lower Auto diluter station for SA 1050 Eprom V. 5.3 and higher Mixing device for samples for SA 1050/74 220/240 V, 50 Hz Mixing device for samples for SA 1050/74 110/120 V, 60 Hz Mixing device for samples for SA 1053, 220/240 V, 50 Hz or 110/120 V, 60 Hz Spring, tube guiding for SA Upgrade set for SA 1070 with use of FlowAccess software Upgrade set for use of two (2) needles for SA Serial No and lower

11 1.6 General sampler accessories, continued Upgrade set for use of four (4) needles on SA Serial No and lower Upgrade set for use of two (2) needles on SA Serial No and higher Upgrade set for use of four (4) needles on SA Serial No and higher Auto diluter station for SA 1074 Serial No and higher Auto diluter station for SA 1074 Serial No and lower Mixing device for samples for V, 50Hz. Mixing device for samples for V, 50Hz. Cable RS232 for connecting SA 1090 to SA Valve electric with DIN connector for SA 1100/1150 Upgrade kit to 80 or 100 samples, valve and needle for SA 1100/1150 Flush vessel for sampler SA 1074/1050 (Note; remove plastic top, not required) Cable RS 232, connecting sampler SA 1074 to computer 3 m Cable RS 232, connecting sampler SA 1050/52/53/70 to computer 5 m Valve electrical 2 way for SA 1050/53/74 Syringe 10 ml for diluter station Syringe 25 ml for diluter station Syringe salt line 10 ml for diluter station Plunger for syringe 11 O-ring for flush vessel in diluter stations / /

12 Section 2: Chemistry units and standard components 2.1 Chemistry units SA modules 16 channels with one pump deck SA modules 16 channels with two pump decks Discontinued SA 2000 SA modules 16 channels with one pump deck 4 modules 16 channels with two pump decks 2.2 Accessories for chemistry units SA 2010 SA 5219 SA 5380 SA 5381 Grease for pump decks 50 ml Pinners for cleaning StSt needles, 2 sizes included 2 pcs. Sinker, glass 10 pcs. Reagent filter, in-line 10 pcs. SA 5382 SA 5383 SA 5384 SA 5385 Plastic reagent bottle 1 liter Plastic reagent / waste container 5 liter Plastic reagent / waste container 10 liter Plastic waste container 20 liter SA 5386 SA 5387 SA 5388 SA 5389 Glass bottle, brown 1 liter Plastic reagent bottle 2 liter Plastic bottle 0.5 liter Plastic waste container 25 liter SA 5418 SA Lubricant, bottle 25 ml Glue for Tygon, bottle 25 ml Plastic bottle, brown 500 ml Plastic bottle, brown 1 liter 12

13 2.2 Accessories for chemistry units, continued SA 5703 SA 5781 SA KIT Tool kit for continuous flow analyzer Wash bottle, glass Accessories, analyzer start-up kit, customized for your applications Waste receptacle for 6 waste tube Base mounting plate for re-sampler Dustcover for SA 2000/4000 Mounting plate Z shape for Dustcover for SA 3000/ Pump for the accommodation of four additional pumptubes Heating control board (heater 1 and 2) for SA 3000/5000 Heating control board (heater 3 and 4) for SA 3000/5000 Socket bench 10 positions 230 V, for Euro power plugs Power cord for 230 V, Euro power plug Power cord, USA plug 110V / 60Hz Push button speed selection for SA 3000/5000 Cooling fan for SA 2000/ Cooling fan for SA 3000/5000 Power supply board for SA 3000/5000 Temperature controller for SA 3000/5000 T connector plastic for waste vessel 13

14 2.2 Accessories for chemistry units, continued L connector plastic for waste vessel Pressure regulator Tube connector for pressure regulator 2.3 Pump and accessories 16 channels 16 channels Pump, 2 x 16 channels for SA /240 V, 50 Hz Pump, 2 x 16 channels for SA V, 60 Hz Pump, 1 x 16 channels for SA /240 V, 50 Hz Pump, 1 x 16 channels for SA V, 60 Hz Pump, 2 x 16 channels for SA Volt DC Pump, 1 x 16 channels for SA Volt DC Handle for pump deck Cogwheel pump side Cogwheel motor side for SA 2000/4000 Cogwheel motor side for SA 3000/ Roller Cage Springs for pump deck pcs. Pump deck for pump Needle block for Bubble injector Motor for SA 2000/ /240 V, 50 Hz Capicitor for pump motor SA 2000/4000, 220 V Capicitor for pump motor SA 2000/4000, 110 V 14

15 2.3 Pump and accessories, continued Motor for SA 2000/ /120 V, 60 Hz Motor for SA 2000/ /120 V, 50 Hz Motor for SA 3000/ Volt DC Pump for air injection Tube connector for needle block Chemicals and reagents SC Brij 35, 30% solution 250 ml SC MSD (Iron determination) 20% solution 50 ml SC TW20, 50% solution 50 ml SC SOD20E (Sulfur Dioxide application) 250 ml SC Lerolat, 20% solution 50 ml SC Triton X-100, 10% solution 50 ml SC FFD ml SC FFD ml SC Lauryl Sulfate Sodium salt 25 g SC Antifoam, 10% suspension 50 ml SC Activated Cadmium 10 g SC Sigmacote, for coating of phase separator 25 ml SC Hostapur 50 ml SC OCD-8, cleaning detergent 250 ml Boiling granules 250 g 15

16 3.1 Standard module components Section 3: Chemistry module components SA 5102 SA 5107 SA 5108 SA 5109 Module mounting plate solvent resistant, 38 x 10.5 cm Module mounting plate standard, 38 x 10.5 cm Module mounting plate with dialyzer hole, 38 x 10.5 cm End block for SA 5102/07/08 SA 5115 SA Module mounting plate standard, 38 x 8.4 cm Module mounting plate solvent resistant, 38 x 8.4 cm Manifold holder including rod and screws 3.2 Clamps SA 5110 SA 5111 SA 5113 SA 5114 Mounting clamp for coils large Mounting clamp for coils small Mounting clamp for coil SA 5307 Mounting clamp for coils SA 5327/5365/ Mounting clamp for SA 5357 Metal clamp 6 mm Metal clamp 12 mm Mounting clamp for waste receptacle Clamp for pump tubes 16

17 3.3 Manifolds SA 3230 SA 3231 SA 3235 SA 3236 Discontinued, replaced by SA 3235 Discontinued, replaced by SA 3236 Manifold 4-way, 3 StSt needle 1.0 mm Manifold 4-way, 3 StSt needle 1.5 mm SA 5200 SA 5201 SA 5202 SA 5203 Manifold glass T-shape large bore Manifold glass T-shape 1.5 mm Manifold glass T-shape PtIr 1.5 mm Manifold glass, PtIr inlet 1.0 mm SA 5204 SA 5205 SA 5206 SA 5207 Manifold glass, H-shape 2.0 mm Inlet connector glass capillary 1.5 mm Inlet connector glass PtIr 2.0 mm Debubbler glass large volume SA 5208 SA 5209 SA 5210 SA 5211 Adductor glass T-piece 1.5 mm capillary Inlet connector glass 2.0 mm capillary Debubbler glass, H-shape, small volume Debubbler, glass, T, small volume, inlet ID 1.5 mm outlet ID 2.0 mm SA 5212 SA 5213 SA 5214 SA 5215 Debubbler straight very large volume Manifold gas/liquid separator Connector glass, T-shape, 2.0 mm ID Gas/liquid separator, glass 17

18 3.3 Manifolds, continued SA 5216 SA 5217 SA 5220 SA 5221 Manifold 4-way, 2 PtIr needles glass 2.0 mm Debubbler glass, medium volume Manifold T, 1 StSt needle, Perspex 2.0 mm Manifold T, 1 KelF nipple, Perspex 2.0 mm SA 5222 SA 5223 SA 5224 SA 5230 Manifold T, 1 KelF nipple, KelF 2.0 mm Sample splitter 3-way Perspex, KelF nipples Sample splitter 3-way Perspex, KelF nipples large bore Discontinued, replaced by SA 5235 SA 5232 SA 5233 SA 5234 SA 5235 Discontinued, replaced by SA 5237 Discontinued, replaced by SA 5238 Manifold 4-way 1 PtIr needle 2 KelF nipple KelF 2.0 mm Manifold 4-way 3 StSt needle, Perspex 1.5 mm SA 5237 SA 5238 SA 5240 SA 5241 Manifold 4-way 1 PtIr needle 2 KelF nipple Perspex 2.0 mm Manifold 4-way 1 PtIr needle 2 KelF nipple Perspex 1.5 mm Manifold 3-way 2 StSt needles Perspex 1.5 mm Manifold 3-way 2 StSt needles Perspex 2.0 mm SA 5242 SA 5244 SA 5245 SA 5246 Manifold 3-way 2 KelF nipple KelF 2.0 mm Manifold 4-way 3 StSt needles Perspex 2.0 mm micro bore needle Manifold 4-way 3 StSt needles Perspex 2.0 mm Manifold 2-way 2 StSt needles Perspex 1.0 mm 18

19 3.3 Manifolds, continued SA 5247 SA 5248 SA 5249 SA 5250 Manifold 2-way 2 KelF nipples KelF 1.0 mm Manifold 4-way 4 StSt needles Perspex 0.8 mm Manifold 3-way 3 StSt needles Perspex Resampler 3-way 1 StSt needle Perspex SA 5251 SA 5255 SA 5256 SA 5260 Resampler 3-way 1 KelF nipple KelF Resampler 3-way 1 StSt needle Perspex Resampler 3-way 1 KelF nipple KelF Sample splitter 3-way 3 StSt needles Perspex SA 5261 SA 5262 SA 5263 Sample splitter 4-way 4 StSt needles Perspex Sample splitter 5 way 5 StSt needles Perspex Sample splitter 3-way 3 PtIr needles KelF SA 5349 SA 5421 Decanting coil glass OD ID 2.0 mm Fastener Perspex small 10 pcs. SA 9220 SA 9221 SA 9222 SA 9240 Manifold T StSt needle Manifold T Kelf nipple Manifold T Kelf Manifold 3-way 2 StSt needle 19

20 3.3 Manifolds, continued SA 9241 SA 9242 SA 9244 SA 9245 Manifold 3-way 2 StSt needle Manifold 3-way nipple 2.0 mm Manifold inlet connector 1.5mm Manifold inlet connector 2.0 mm 20

21 3.4 Glass coils SA 3310 Coil glass 50 turns micro bore SA 3312 Coil glass 30 turns micro bore SA 3313 Coil glass 20 turns micro bore SA 3314 Coil glass 10 turns micro bore SA 3315 Coil glass 5 turns micro bore SA 3317 Coil glass 50 turns micro bore large SA 5320 Coil glass 50 turns OD x ID 4.0 x 1.5 mm SA 5321 Coil glass 40 turns OD x ID 4.0 x 1.5 mm SA 5322 Coil glass 30 turns OD x ID 4.0 x 1.5 mm SA 5323 Coil glass 20 turns OD x ID 4.0 x 1.5 mm SA 5324 Coil glass 10 turns OD x ID 4.0 x 1.5 mm SA 5325 Coil glass 5 turns OD x ID 4.0 x 1.5 mm SA 5326 Coil glass 5 turns OD x ID 4.0 x 2.0 mm SA 5327 Coil glass 50 turns OD x ID 4.0 x 1.5 mm, 50 mm Diameter SA 5328 Coil glass 10 turns OD x ID 4.0 x 2.0 mm SA 5329 Coil glass 20 turns OD x ID 4.0 x 2.0 mm 3.5 Heat exchanger and accessories SA 5300 SA 5300-B SA 5301 SA 5301-B SA 5302 SA 5302-B SA 5303 SA 5303-B SA 5304 SA 5304-B SA 5305 SA 5305-B SA 5307 SA 5308 Coil with heat-exchanger 50 turns Coil with heat-exchanger 50 turns, light protected Coil with heat-exchanger 40 turns Coil with heat-exchanger 40 turns, light protected Coil with heat-exchanger 30 turns Coil with heat-exchanger 30 turns, light protected Coil with heat-exchanger 20 turns Coil with heat-exchanger 20 turns, light protected Coil with heat-exchanger 10 turns Coil with heat-exchanger 10 turns, light protected Coil with heat-exchanger 5 turns Coil with heat-exchanger 5 turns, light protected Coil with heat-exchanger 50 turns, 50 mm diameter Coil with heat exchanger 50 turns, 120 mm SA 5310 Coil glass 50 turns for SA 5300 SA 5311 Coil glass 40 turns for SA 5301 SA 5312 Coil glass 30 turns for SA 5302 SA 5313 Coil glass 20 turns for SA 5303 SA 5314 Coil glass 10 turns for SA 5304 SA 5315 Coil glass 5 turns for SA 5305 SA 5317 Coil glass 50 turns for SA 5307 SA 5318 Coil glass 50 turns for SA 5308 SA 5330 Heat-exchanger for SA 5305/5304 SA 5331 Heat-exchanger for SA 5303/5302 SA 5332 Heat-exchanger for SA 5301/5300 SA 5334 Heat-exchanger for SA 5308 SA 5335 Heat-exchanger for SA 5307 SA 5344 SA 5346 Teflon coil 1.5 m with heat exchanger, complete Teflon coil 5 m with heat exchanger, complete 21

22 3.5 Heat exchanger and accessories, continued SA 5333 SA 5336 SA 5337 SA 5338 Tube connector for heat exchanger SA 5300/1/2/3/4/5 5 pcs. O ring for heat exchanger cap pcs. O ring for SA pcs. O ring for fastener SA pcs. SA 5339 SA Screw, nylon for heat-exchanger 10 pcs. Fastener nylon large 5 pcs. Cap for SA 5300/1/2/3/4/5 without O ring Cap for SA 5307 without O ring Cap for SA 5308 without O ring Tube connector for heat exchanger SA 5308 O -ring for heat exchanger cap O -ring for heat exchanger cap

23 3.6 Reactor and accessories SA 3521 SA 5521 SA 5522 SA 5523 SA 5524 Reactor including glass coil micro bore, 220/240 V, 50 Hz or 110/120 V, 60 Hz Reactor including glass coil , 220/240 V, 50 Hz or 110/120 V, 60 Hz Reactor including glass coil , 220/240 V, 50 Hz or 110/120 V, 60 Hz Reactor including glass coil , 220/240 V, 50 Hz or 110/120 V, 60 Hz Reactor including glass coil , 220/240 V, 50 Hz or 110/120 V, 60 Hz SA 5531 Reactor including glass coil , 220/240 V, 50 Hz or 110/120 V, 60 Hz Reactor including StSt coil V, 50 Hz Reactor including StSt coil V, 60 Hz Reactor including StSt coil V, 50 Hz Reactor including StSt coil V, 60 Hz Reactor including StSt coil V, 50 Hz Reactor including StSt coil V, 60 Hz Reactor including StSt coil V, 50 Hz Reactor including StSt coil V, 60 Hz Reactor including PTFE coil 32 turns 230 V, 50 Hz Reactor including PTFE coil 32 turns 110 V, 60 Hz Coil glass 35 turns for SA Coil glass 15 turns for SA Coil glass double for SA Coil glass 5 turns for SA Coil glass 35 turns for SA 3521 micro bore Coil glass double for SA Coil StSt 64 turns for Coil StSt 5 turns for Coil StSt 32 turns for Coil StSt 15 turns 3 mm ID for Controller reactor including temperature display 230 V, 50 Hz Controller reactor including temperature display 110 V, 60 Hz Controller reactor including temperature display 240 V, 50 Hz. SA O rings and oil for SA 5521/22/23/24 Insolation set for all reactors except the smaller SA 5531 Heating element for reactor 110 V, 60 Hz Heating element for reactor 230 V, 50 Hz 23

24 3.6 Reactor and accessories, continued Pt 100 element for reactor Extension cable reactor 120 cm Thermal Fuse 165 C for SA 5521/22/22/23/24 Thermal switch 165 C for SA 5521/22/23/ Dialyzers and accessories SA 3271 Dialyzer 75 mm Micro bore SA 3272 Dialyzer 150 mm Micro bore SA 3274 Dialyzer 300 mm Micro bore SA 3275 Dialyzer 800 mm Micro bore SA 5271 SA 5272 SA 5273 SA 5274 SA 5275 SA 5276 Dialyzer 70 mm Dialyzer 150 mm Dialyzer 35 mm Dialyzer 300 mm Dialyzer 700 mm Dialyzer 700 mm, 2 mm bore Dialyzer, PTFE, 150 mm Dialyzer, PTFE, 35 mm Dialyzer, PTFE, 300 mm Dialyzer, PTFE, 700 mm. SA 5421 SA 5280 Membrane PTFE 150 mm (Conductivity) 4 pcs. SA 5282 Membranes pre-mount, small 12 pcs. SA 5283 Membranes pre-mount, large 12 pcs. SA 5284 Membrane CO 2 for gas dialysis 1 pcs Membranes PTFE, pre-mount for SA pcs. Fastener Perspex small Membranes PTFE, pre-mount for SA pcs. (old model) 10 pcs Membranes PTFE, pre-mount for SA 5274/ pcs Membranes Pergamin, pre-mount for SA pcs Membranes Pergamin, pre-mount for SA pcs Membranes PTFE, for gas dialysis, pre-mount for SA pcs Membranes PTFE, for gas dialysis, pre-mount for SA pcs Membranes PTFE, for gas dialysis, pre-mount for SA 5274/ pcs. 24

25 3.8 Miscellaneous module components SA 5218 SA 5290 SA 5291 SA 5292 Pressure/liquid separator, 3 way Valve manual switching 4-way for Cd column or pre-dilution Tubing for SA pcs. Fitting and ring for SA pcs. SA 5293 SA 5355 SA 5357 SA 5358 Valve automatic switching reagent/cd column Column glass, phosphate separation without resin Column glass U, unfilled Column glass U, filled with activated Cadmium SA 5359 SA 5360 SA 5373 SA 5374 Tube glass, OD x ID 4.0 x 2.0 mm 1.5 m Tube glass, ODxID 4.0 x 1.5 mm 1.5 m Cadmium column glass, unfilled Cadmium column glass, filled with activated Cadmium SA 5421 SA 5424 SA 5530 SA 5705 Fastener Perspex small 10 pcs. Tubing conector for SA 5373/ pcs. Back pressure regulator Glass bottle for potassium cyanide reagent for nicotine in tobacco SA 5706 SA 5707 SA 5708 SA 5709 Waste bottle for collecting antidote dilutions for nicotine in tobacco Overflow bottle nicotine Antidote collecting tube glass Safety air scrubber glass 25

26 3.8 Miscellaneous module components continued SA 5710 SA 5711 SA 5720 SA 5725 Glass tube for bottle SA 5707 Glass tube for bottle SA 5720 Reagent bottle for nicotine in tobacco Waste bottle for nicotine in tobacco, complete set SA CA Air/liquid separator for TOC Safety vessel glass Mounting plate for Cd column, complete Mounting clamp for SA Ball valve 3-way 1 4 PP Male connector 1 4 PP for ball valve (3 required) Cap with O-ring, 18 mm Cap with O-ring, 25 mm Cap with O-ring, 32 mm Note: All Chemicals and reagents see page 14 SC Activated Cadmium 10 g 26

27 Section 4: Tubing, sleeves, needles and nipples Special SA 3002 Pump tubing Santoprene 3 color bridges, black 0.32 ml/min, set 12 pcs. 4.1 Pump tubing TYGON 3 color bridges, set 12 pcs. Transparent SA 3021 orange/red 0.03 ml/min SA 3022 orange/blue 0.05 ml/min SA 3023 red/blue 0.06 ml/min SA 3024 orange/green 0.10 ml/min SA 3025 orange/yellow 0.16 ml/min SA 3026 orange/white 0.23 ml/min SA 3027 black 0.32 ml/min SA 3028 orange 0.42 ml/min SA 3029 white 0.60 ml/min SA 3030 red 0.80 ml/min SA 3031 grey 1.00 ml/min SA 3032 yellow 1.20 ml/min SA 3033 yellow/blue 1.40 ml/min SA 3034 blue 1.60 ml/min SA 3035 green 2.00 ml/min SA 3036 purple 2.50 ml/min SA 3037 purple/black 2.90 ml/min SA 3038 purple/orange 3.40 ml/min SA 3039 purple/white 3.90 ml/min 4.2 Pump tubing SILICON 3 color bridges, set 6 pcs. Opaque SA 3041 orange/white 0.23 ml/min SA 3042 black 0.32 ml/min SA 3043 orange 0.42 ml/min SA 3044 white 0.60 ml/min SA 3045 red 0.80 ml/min SA 3046 grey 1.00 ml/min SA 3047 yellow 1.20 ml/min SA 3048 yellow/blue 1.40 ml/min SA 3049 blue 1.60 ml/min SA 3050 green 2.00 ml/min SA 3051 purple 2.50 ml/min SA 3052 purple/black 2.90 ml/min SA 3053 purple/orange 3.40 ml/min SA 3054 purple/white 3.90 ml/min 4.3 Pump tubing SOLVENT FLEX 3 color bridges, set 12 pcs. Yellow SA 3063 orange/white 0.23 ml/min SA 3064 black 0.32 ml/min SA 3065 orange 0.42 ml/min SA 3066 white 0.60 ml/min SA 3067 red 0.80 ml/min SA 3068 grey 1.00 ml/min SA 3069 yellow 1.20 ml/min SA 3070 yellow/blue 1.40 ml/min SA 3071 blue 1.60 ml/min SA 3072 green 2.00 ml/min SA 3073 purple 2.50 ml/min 4.4 Pump tubing ACID FLEX 3 color bridges, 1 pcs. Black SA 3080 orange/yellow 0.16 ml/min SA 3081 orange/white 0.20 ml/min SA 3082 black 0.30 ml/min SA 3083 orange 0.43 ml/min SA 3084 white 0.53 ml/min SA 3085 red 0.64 ml/min SA 3086 grey 0.77 ml/min SA 3087 yellow 0.92 ml/min 27 SA 3088 yellow/blue 1.10 ml/min SA 3089 blue 1.20 ml/min SA 3090 green 1.40 ml/min SA 3091 purple 1.80 ml/min SA 3092 purple/black 2.10 ml/min SA 3093 purple/orange 2.40 ml/min SA 3094 purple/white 2.80 ml/min

28 SA 1060 Pump tubing Tygon 2 color bridges, orange/black, set 8 pcs. (see also page 9) SA 1061 Pump tubing Tygon 2 color bridges, red, set 8 pcs. (see also page 9) 4.5 Pump tubing TYGON 2 color bridges, set 12 pcs. Transparent SA 5020 orange/black ml/min SA 5021 orange/red 0.03 ml/min SA 5022 orange/blue 0.05 ml/min SA 5023 red/blue 0.06 ml/min SA 5024 orange/green 0.10 ml/min SA 5025 orange/yellow 0.16 ml/min SA 5026 orange/white 0.23 ml/min SA 5027 black 0.32 ml/min SA 5028 orange 0.42 ml/min SA 5029 white 0.60 ml/min SA 5030 red 0.80 ml/min SA 5031 grey 1.00 ml/min SA 5032 yellow 1.20 ml/min SA 5033 yellow/blue 1.40 ml/min SA 5034 blue 1.60 ml/min SA 5035 green 2.00 ml/min SA 5036 purple 2.50 ml/min SA 5037 purple/black 2.90 ml/min SA 5038 purple/orange 3.40 ml/min SA 5039 purple/white 3.90 ml/min 4.6 Pump tubing SILICON 2 color bridges, set 6 pcs. Opaque SA 5040 translucent 1.30 ml/min SA 5041 orange/white 0.23 ml/min SA 5042 black 0.32 ml/min SA 5043 orange 0.42 ml/min SA 5044 white 0.60 ml/min SA 5045 red 0.80 ml/min SA 5046 grey 1.00 ml/min SA 5047 yellow 1.20 ml/min SA 5048 yellow/blue 1.40 ml/min SA 5049 blue 1.60 ml/min SA 5050 green 2.00 ml/min SA 5051 purple 2.50 ml/min SA 5052 purple/black 2.90 ml/min SA 5053 purple/orange 3.40 ml/min SA 5054 purple/white 3.90 ml/min 4.7 Pump tubing SOLVENT FLEX 2 color bridges, set 12 pcs. Yellow SA 5060 orange/blue 0.05 ml/min SA 5061 orange/green 0.10 ml/min SA 5062 orange/yellow 0.16 ml/min SA 5063 orange/white 0.23 ml/min SA 5064 black 0.32 ml/min SA 5065 orange 0.42 ml/min SA 5066 white 0.60 ml/min SA 5067 red 0.80 ml/min SA 5068 grey 1.00 ml/min SA 5069 yellow 1.20 ml/min SA 5070 yellow/blue 1.40 ml/min SA 5071 blue 1.60 ml/min SA 5072 green 2.00 ml/min SA 5073 purple 2.50 ml/min SA 5074 purple/black 2.90 ml/min SA 5075 purple/orange 3.40 ml/min SA 5076 purple/white 3.90 ml/min 4.8 Pump tubing ACID FLEX 2 color bridges, each Black SA 5080 orange/yellow 0.16 ml/min SA 5081 orange/white 0.20 ml/min SA 5082 black 0.30 ml/min SA 5083 orange 0.43 ml/min SA 5084 white 0.53 ml/min SA 5085 red 0.64 ml/min SA 5086 grey 0.77 ml/min SA 5087 yellow 0.92 ml/min 28 SA 5088 yellow/blue 1.10 ml/min SA 5089 blue 1.20 ml/min SA 5090 green 1.40 ml/min SA 5091 purple 1.80 ml/min SA 5092 purple/black 2.10 ml/min SA 5093 purple/orange 2.40 ml/min SA 5094 purple/white 2.80 ml/min

29 4.9 Tubing SA 3142 Tubing Polyethylene 0.5 mm ID 5 m SA 3150 Tubing Silicon 0.5 mm ID 3 m SA 5130 Tubing Tygon 0.8 mm ID 15 m SA 5131 Tubing Tygon 1.6 mm ID 15 m SA 5132 Tubing Tygon 2.4 mm ID 15 m SA 5133 Tubing Tygon 3.2 mm ID 15 m SA 5140 Tubing Polyethylene 0.7 mm ID 15 m SA 5141 Tubing Polyethylene 1.0 mm ID 15 m SA 5142 Tubing Polyethylene 1.5 mm ID 15 m SA 5143 Tubing Polyethylene 4 x 1 mm Od x ID 15 m SA 5144 Tubing Polyethylene 1.0 mm ID 0.2 m SA 5150 Tubing Silicone 1.0 mm ID 15 m SA 5154 Tubing for waste organic solvents 3 m SA 5155 Tubing PVC 6.0 mm ID 15 m SA 5156 Tubing PVC 25 mm ID 1.5 m SA 5160 Tubing PTFE 0.7 mm ID 15 m SA 5170 Tubing PTFE 2.8 x 0.8 mm Od x ID 15 m SA 5180 Transmission tubing Acidflex 0.51 mm ID 1 m SA 5181 Transmission tubing Acidflex 0.63 mm ID 1 m SA 5182 Transmission tubing Acidflex 0.76 mm ID 1 m SA 5183 Transmission tubing Acidflex 0.89 mm ID 1 m SA 5184 Transmission tubing Acidflex 1.00 mm ID 1 m SA 5185 Transmission tubing Acidflex 1.10 mm ID 1 m SA 5186 Transmission tubing Acidflex 1.30 mm ID 1 m SA 5187 Transmission tubing Acidflex 1.40 mm ID 1 m SA 5188 Transmission tubing Acidflex 1.50 mm ID 1 m SA 5189 Transmission tubing Acidflex 1.70 mm ID 1 m SA 5190 Transmission tubing Acidflex 1.90 mm ID 1 m SA 5191 Transmission tubing Acidflex 2.10 mm ID 1 m SA 5192 Transmission tubing Acidflex 2.30 mm ID 1 m SA 5193 Transmission tubing Acidflex 2.50 mm ID 1 m SA 5194 Transmission tubing Acidflex 2.80 mm ID 1 m SA 5291 Tubing for pcs. SA 5359 Tube glass, 4.0 x 2.0 mm OD x ID 1.5 m SA 5360 Tube glass, 4.0 x 1.5 mm OD x ID 1.5 m 4.10 Sleeves Teflon tubing, 1.6 x 0.8 mm OD x ID 15 m Pharmed tubing 1 mm ID 1 m SA 5400 Sleeve, Tygon 3.2 mm ID 50 pcs. SA 5401 Sleeve, Tygon 2.4 mm ID 50 pcs. SA 5402 Sleeve, Tygon 1.6 mm ID 50 pcs. SA 5406 Sleeve, Silicon 2.4 mm ID 50 pcs. SA 5407 Sleeve insert for phase separator 5 pcs. SA 5408 Sleeve, Polyethylene 1.5 mm ID 50 pcs. SA 5409 Sleeve, PVC 6.0 mm ID 50 pcs. SA 5414 Sleeve, Acidflex 1,9mm. ID 25 pcs. SA 5415 Sleeve, Acidflex 2,5mm. ID 25 pcs. 2CA14321 Sleeve, Acidflex 3.2 mm ID 5 pcs. 29

30 4.11 Needles, nipples and tubing conector SA 5431 Needle StSt 0.45 mm ID 5 pcs. SA 5432 Needle StSt 0.80 mm ID 5 pcs. SA 5433 Needle StSt 1.00 mm ID 5 pcs. SA 5434 Needle StSt 1.50 mm ID 5 pcs. SA 5435 SA 5436 Needle PtIr 0.50 mm ID Needle PtIr 0.80 mm ID SA 5454 Nipple polyethylene N5 10 pcs. SA 5455 Nipple polyethylene N6 10 pcs. SA 5456 Nipple polyethylene N7 10 pcs. SA 5457 Nipple polyethylene N8 10 pcs. SA 5458 Nipple polyethylene N9 10 pcs. SA 5504 Connector for SA T connector plastic for waste vessel L connector plastic for waste vessel 30

31 5.1 Photometers Section 5: Photometers, detectors and meters SA 6200 Photometer dual channel 220/240 V, 50 Hz or 110/120 V, 60 Hz * SA 6205 Photometer insert, dual channel SA 6250 Photometer matrix correction 220/240 V, 50 Hz or 110/120 V, 60 Hz * SA 6255 Photometer insert, turbo matrix correction * Please note; extension to power supply units with bajonet connectors (at rear) require an additional conversion cable cat. no plus 2 nuts cat. no

32 5.1 Photometers, continued * SA 6260 Photometer insert, matrix correction SA 6270 Photometer turbo matrix correction 220/240 V, 50 Hz or 110/120 V, 60 Hz * Please note; extension to power supply units with bajonet connectors (at rear) require an additional conversion cable cat. no plus 2 nuts cat. no

33 5.2 Accessories for photometers Photometer lamp for SA 6000 PCB for SA 6200/05/50/55/60/70 Cable, conversion for 3 pin photometer plug to 5 pin Cable, photometer to interface Photometer head dual channel analogue for SA 6200/05 Photometer head dual channel digital for Cable, connecting detector head to SA 6300 Power supply for 2 x SA 6205/55/ Photometer head matrix for SA 6250/60 Photometer head matrix digital for Photometer head turbo matrix for SA 6255/70 Photometer head turbo matrix digital for Cable digital photometer head to interface for /4/6/8 (old interface) 1.5 meter Cable, connecting detector head to analog photometers Dial for fine potentiometer SA 6000 and SA 6200/50/70 Indication light power switch Lamp for SA 6200/05/50/55/60/70/ 6300 (replaces ) Photometer photocell nm Photometer photocell nm 33

34 5.3 UV photometer and accessories SA 6850 SA 6443 UV Photometer 220/240 V, 50 Hz or 110/120 V, 60 Hz Flow cell 30 mm for bubble gating, including spacer SA 6701 SA 6703 SA 6711 SA 6712 Flow cell 10 mm quartz for SA 6750, including spacer (SA 6750 UV photometer discontinued) Inlet and outlet connection tubing with screws for SA 6701 Deuterium lamp for UV detector SA 6700 (SA 6700 UV photometer discontinued) Deuterium lamp for UV detector SA 6750 (SA 6750 UV photometer discontinued) SA 6752 SA 6801 SA 6803 SA 6811 Flow cell holder for SA 6701 Filter 275 nm for SA 6850 Filter 280 nm for SA 6850 Deuterium lamp for UV detector SA

35 5.4 Ion selective electrode (ISE) and accessories SA 6054 SA 6055 SP Electrode reference outer filling solution for Electrode reference inner filling solution for Interface for ph/ise 230 V, 50 Hz or 110 V/120 V, 60 Hz Chamber for 12 mm. Ø ISE and reference electrode Flow cell for Chloride electrochemical measurement Power supply for O-ring for sealing ISE, bottom O-ring for sealing ISE electrode Electrode ISE Fluoride, 12 mm. OD Electrode ISE Reference, 12 mm. OD Cable for ISE detector /4 1.2 m 35

36 5.5 Other detectors and meters plus accessories Flame photometer Start up kit flame photometer Flame photometer single channel Flame photometer dual channel Air compressor silent, for /910 flame photometer Fluorimeter SA 6310 SA 6430 SA Fluorimeter 220/240 V, 50 Hz or 110/120 V, 60 Hz Flow cell without debubbler Flow cell with debubbler Lamp for SA 6310 fluorimeter ph and viscosity SA 5295 SA 8640 Electrode, ph, micro flow through, DIN Signal offset compensator for ph and Viscosity IR detector Conductivity SA 6280 SA 5267 IR detector, stand alone unit Conductivity cell 36

37 5.6 Flow cells Flow cell 50 mm Flow cell 30 mm + spacer Flow cell 10 mm + spacer SA 3401 Flow cell 10 mm with debubbler, including spacer SA 3411 Flow cell 10 mm without debubbler 1.0 mm ID, including spacer SA 6275 Flow cell 50 mm with debubbler, for SA 6270/55 only SA 6400 Flow cell 5 mm with debubbler 1.8 mm ID, including spacer SA 6401 Flow cell 10 mm with debubbler 1.8 mm ID, including spacer SA 6403 Flow cell 30 mm with debubbler 1.8 mm ID, including spacer SA 6411 Flow cell 10 mm without debubbler 1.0 mm ID, including spacer SA 6413 Flow cell 30 mm without debubbler 1.0 mm ID, including spacer SA 6415 Flow cell 50 mm without debubbler 1.0 mm ID SA 6421 Flow cell 10 mm tube shape SA 6423 Flow cell 30 mm tube shape SA 6425 Flow cell 50 mm tube shape SA 6430 Flow cell without debubbler for 6310 SA 6431 Flow cell with debubbler for 6310 SA 6441 Flow cell 10 mm for bubble gating, including spacer SA 6443 Flow cell 30 mm for bubble gating, including spacer SA 6445 Flow cell 50 mm for bubble gating SA 6460 Flow cell 5 mm for color in beer and wort 1.4 mm, including spacer SA 6461 Flow cell 10 mm color in beer 1.4 mm ID, including spacer SA 6475 * Flow cell 50 mm without debubbler tube shape SA 6701 Flow cell 10 mm quartz for SA 6700/6750, including spacer * To be used with applications using Chloroform extraction 5.7 Filters SA 6501 SA 6503 SA 6506 SA 6507 SA 6511 SA 6513 SA 6514 SA 6515 SA 6517 SA 6518 SA 6519 SA 6520 SA 6521 SA 6523 SA 6525 SA 6527 SA 6529 Filter 340 nm Filter 350 nm Filter 365 nm Filter 370 nm Filter 390 nm Filter 400 nm Filter 405 nm Filter 410 nm Filter 420 nm Filter 425 nm Filter 430 nm Filter 435 nm Filter 440 nm Filter 450 nm Filter 460 nm Filter 470 nm Filter 480 nm SA 6531 SA 6533 SA 6534 SA 6535 SA 6537 SA 6539 SA 6541 SA 6542 SA 6543 SA 6544 SA 6545 SA 6547 SA 6549 SA 6551 SA 6553 SA 6555 SA 6557 Filter 490 nm Filter 500 nm Filter 505 nm Filter 510 nm Filter 520 nm Filter 530 nm Filter 540 nm Filter 545 nm Filter 550 nm Filter 555 nm Filter 560 nm Filter 570 nm Filter 580 nm Filter 590 nm Filter 600 nm Filter 610 nm Filter 620 nm SA 6559 SA 6561 SA 6562 SA 6563 SA 6565 SA 6571 SA 6573 SA 6575 SA 6577 SA 6595 SA 6597 SA 6601 SA 6609 SA 6635 SA 6801 SA 6803 Filter 630 nm Filter 640 nm Filter 645 nm Filter 650 nm Filter 660 nm Filter 690 nm Filter 700 nm Filter 710 nm Filter 720 nm Filter 810 nm Filter 820 nm Filter 840 nm Filter 880 nm Filter 1010 nm Filter 275 nm Filter 280 nm SA 6610 Grey filters 0.6 OD 6 pcs. 1.0 OD 6 pcs. 37

38 6.1 Software Section 6: Data handling FlowAccess, Microsoft Windows based data aquasition software program FlowReport, Microsoft Windows based software program for customized data output protocols 6.2 Analogue interface Extension set analogue for upgrade from 2 to 4 channels Extension set analogue for upgrade from 4 to 8 channels Extension set analogue for upgrade from 8 to 16 channels System controller extension set includes 1 x socket bench 220/240 V, 50 Hz or 110/120 V, 60 Hz System controller extension set includes 2 x socket bench 220/240 V, 50 Hz or 110/120 V, 60 Hz Extension set for RS232 connection of max. 3 PC controlled samplers 6.3 Digital interface CFA interface includes desktop computer, printer, and FlowAccess Windows TM software 220/240 V, 50 Hz or 110/120 V, 60 Hz 38

39 6.3 Digital interface, continued Digital matrix detector 220/240 V, 50 Hz or 110/120 V, 60 Hz Digital dual channel detector 220/240 V, 50 Hz or 110/120 V, 60 Hz Digital turbo matrix detector 220/240 V, 50 Hz or 110/120 V, 60 Hz Socket bench, 220/240 V, 50 Hz or 110/120 V, 60 Hz Please state which plug type required Adaptor cable for socket bench to connect interface or chemistry unit (special) Analogue insert for 2 channels Analogue insert for 4 channels Analogue insert for 8 channels System controller extension set incl. 1x socket bench 230V, 50Hz or 110/120V, 60Hz Upgrade kit System Controller Sampler Extension Cable digital photometer head to interface for /02/ meter Board insert for the interfacing of one (1) analogue input Board insert for the interfacing of two (2) analogue inputs Board insert for the interfacing of four (4) analogue inputs Board insert for the interfacing of eight (8) analogue inputs Board insert for the interfacing of ten (10) analogue inputs Extension set digital for interface & detector upgrade 2 to 4 and 6 to 8 channels Extension set digital for interface & detector upgrade 4 to 6 channels Extension set digital for interface & detector upgrade 4 to 8 channels System controller extension set includes one socket bench 220/240 V, 50 Hz or 110/120 V, 60 Hz System controller extension set includes two socket bench 220/240 V, 50 Hz or 110/120 V, 60 Hz Extension set for RS232 connection of maximum three PC controlled samplers 39

40 7.1 Rinsing valves and accessories Section 7: Supplements and Accessories SA Rinsing valve 10 channel, manual operated Rinsing valve 4 channel acid resistant for use with SA 8502/8503 interface, computer controlled Rinsing valve 4 channel acid resistant for SA 8505 interface, computer controlled Rinsing valve 5 channel + 2 channel acid resistant for SA 8502/ 8503 interface, computer controlled Rinsing valve 5 channel + 2 channel acid resistant for SA 8505 interface, computer controlled Rinsing valve 5 channel, computer controlled Rinsing valve 5 channel for SA 8505 interface, computer controlled Rinsing valve 10 channel, computer controlled Rinsing valve 10 channel for SA 8505 interface, computer controlled SA 1502 SA Scale 300% O ring for pcs. Nipple screw for SA 1500/1521 and pcs. Block (empty) for SA 1500 Manual operation lever for SA Plunger for SA 1500/21 Plunger for /4/7/ /4/7/9 Nipple, rinsing water inlet for SA 1500/1521 Nipple, rinsing water inlet for /9 40

41 7.2 Distillation unit accessories SA 5268 SA 5361 SA 5362 SA 5370 Distillation unit with gas flow through reactor Distillation unit glass, with reagent inlet Distillation unit glass Air/Liquid separator SA 5371 SA CA Condenser, glass Vacuum pump cyanide distillation Air restrictor cyanide distillation Bracket for dust cover SA 3000/5000 with distillation unit Dustcover for SA 3000/5000 with distillation unit Dustcover for distillation unit including spacer SA 3000/5000 Support for stand alone distillation unit Dust cover for stand alone distillation unit 41

42 7.3 Digester and accessories SA 5580 SA 5590 Digester UV-A in-line complete 220/240 V, 50 Hz or 110/120 V, 60 Hz Digester UV-B in-line complete 220/240 V, 50 Hz or 110/120 V, 60 Hz Discontinued SA 5550 SA 5555 Digester UV-A Digester UV-B SA 5365 SA 5549 SA 5551 SA 5552 Coil quartz for SA 5550/80 UV-A digester Power supply for SA 5590 digester 220/240 V, 50 Hz or 110/120 V, 60 Hz Lamp for SA 5550/80 digester Power supply for SA 5550/80 digester 220/240 V, 50 Hz or 110/120 V, 60 Hz SA 5553 SA 5554 SA 5556 SA 5557 Housing for SA 5550 digester Connection nipple for ventilation SA 5550 digester Lamp for SA 5555/90 digester Coil Boro-Silicate for SA 5555/90 digester, 4.0 x 1.5 mm OD x ID SA 5558 SA 5559 SA 5560 SA 5561 Power supply for SA 5555 digester 220/240 V, 50 Hz or 110/120 V, 60 Hz Housing for SA 5555 digester Coil Boro-Silicate for SA 5555 digester 4.0 x 2.0 mm OD x ID Coil Boro-Silicate for SA 5590 digester, 4.0 x 2.0 mm OD x ID 42

43 7.4 Block digester and accessories SA 5620 SA 5630 SA 5640 Block digester for 20 tubes, 250 ml 230 V, 50 Hz Block digester for 20 COD tubes, 230 ml 230 V, 50 Hz Block digester for 42 tubes, 75 ml 230 V, 50 Hz SA 5394 SA 5395 SA 5396 SA 5621 Digester tube 75 ml for SA 5620, calibration mark at 20 ml 20 pcs. Digester tube 75 ml for SA pcs. Digester tube 250 ml for SA pcs. Rack for SA 5620 SA 5641 SA 5730 SA 5750 SA 5751 Rack for SA 5640 Scrubber system for SA 5750/60 Exhaust head for SA 5640 Exhaust tube for SA 5750 SA 5752 SA 5753 SA 5754 SA 5755 Collection tube for SA 5750 Exhaust tube rack for SA 5750 PTFE ring for SA 5750 Rubber ring for SA 5750 SA 5760 SA 5761 SA Exhaust head for SA 5620 Exhaust tube for SA Collection tube for SA 5760 Controller for SA 5620/30/ V, 50 Hz (replaces SA 5600 controller)

44 7.4 Block digester and accessories, continued SA 5763 SA 5764 SA 5765 SA 5770 Exhaust tube rack for SA 5760 PTFE ring for SA 5760 Rubber ring for SA 5760 Acid resistant connection tubing 3 m SA 5780 SA 5782 SA 5783 SA 5785 Scrubber glassware for SA 5730 Bottle container StSt Vacuum pump for SA 5730, 230 V Mobile tray for SA Heating element for SA 5620/30/40 Exhaust-head carrier for manual lift off of rack Pt100 Sensor for SA 5620/30/40 44

45 7.5 Other supplements Enzyme deactivation unit Enzyme deactivation unit two channel, 220/240 V, 50 Hz Enzyme deactivation unit two channel, 110 V, 60 Hz Enzyme deactivation unit two channel, 240 V, 50 Hz Flow meters and valve SA 1330 SA 1331 SA Flow meter 45 l/h Micro flow meter 15 l/h Electric valve gas flow 220/240 V, 50 Hz or 110/120 V, 60 Hz Requires system controler Support for flow meter SA 1330/31 Water bath SA 5501 SA 5505 Water bath for circulation 220/240 V, 50 Hz or 110/120 V, 60 Hz Cooling/heating bath for circulation 220/240 V, 50 Hz or 110/120 V, 60 Hz 45

46 Recorder accessories SA 7031 Recorder paper roll for SA 7011/21 25 pcs. SA 7041 Recorder pen red for SA 7011/21 5 pcs. SA 7042 Recorder pen blue for SA 7011/21 5 pcs. SA 7043 Recorder pen green for SA 7011/21 5 pcs. SA 7044 Recorder pen black for SA 7011/21 5 pcs. SA 7045 Recorder pen red long for SA pcs. SA 7055 Recorder paper roll for SA 7052, set 10 pcs. SA 7532 Recorder paper fanfold for SA 7503/04/05/06 10 pcs. SA 7540 Recorder pen blue for multi pen recorder 5 pcs. SA 7541 Recorder pen red for multi pen recorder 5 pcs. SA 7542 Recorder pen green for multi pen recorder 5 pcs. SA 7543 Recorder pen black for multi pen recorder 5 pcs. SA 7544 Recorder pen brown for multi pen recorder 5 pcs. SA 7545 Recorder pen violet for multi pen recorder 5 pcs. 46

47 Cat. No. Item Page No. SA 1011 Sample needle 7 SA 1012 Sample needle 7 SA 1013 Sample needle 7 SA 1014 Sample needle 7 SA 1015 Sample needle, anti cup lift 7 SA 1016 Sample needle 7 SA 1017 Sample needle 7 SA 1018 Sample needle 7 SA 1020 Sample cups 4 SA 1021 Sample cups 4 SA 1022 Sample cups 4 SA 1023 Sample cups 4 SA 1024 Filette sample filter system 10 SA 1025 Sample cups 5 SA 1026 Sample cups 5 SA 1027 Sample cups 5 SA 1030 Sample cups 5 SA 1032 Sample cups 5 SA 1033 Sample tubes 5 SA 1034 Sample tubes 5 SA 1036 Sample tubes 5 SA 1037 Sample tubes 5 SA 1038 Sample caps 5 SA 1050 Auto Sampler 4 SA 1053 Auto Sampler 4 SA 1060 Pump tubing 10/28 SA 1061 Pump tubing 10/28 SA 1065 Pump head 9 SA 1074 Auto Sampler 4 SA 1075 Auto Sampler 4 SA 1080 Sample valve extension set 10 SA 1091 Tubing 10 SA 1100 Sampler digital 4 SA 1150 Sampler digital 4 SA 1330 Flow meter 45 SA 1331 Micro flow meter 45 SA 1332 Electric valve 45 SA 1500 Rinsing valve 40 SA 1502 O ring 40 SA 1504 Nipple screw 40 SA 2010 Grease 12 SA 3000 Module holder 12 SA 3002 to SA 3094 Pump tubing 27 SA 3142 Tubing 29 SA 3150 Tubing 29 SA 3230 Manifold 17 SA 3231 Manifold 17 SA 3235 Manifold 17 SA 3236 Manifold 17 SA 3271 Dialyzer 24 SA 3272 Dialyzer 24 SA 3274 Dialyzer 24 SA 3275 Dialyzer 24 SA 3310 to SA 3317 Coils, glass 21 SA 3401 Flow cell 37 SA 3411 Flow cell 37 SA 3521 Reactor 23 SA 5000 Module holder 12 SA 5020 to SA 5094 Pump tubing Cat. No. Item Page No. SA 5102 Module mounting plate 16 SA 5107 Module mounting plate 16 SA 5108 Module mounting plate 16 SA 5109 End block 16 SA 5110 Mounting clamp 16 SA 5111 Mounting clamp 16 SA 5113 Mounting clamp 16 SA 5114 Mounting clamp 16 SA 5115 Module mounting plate 16 SA 5116 Module mounting plate 16 SA 5130 to SA 5194 Tubing 29 SA 5200 to SA 5215 Manifolds 17 SA 5218 Pressure/liquid separator 25 SA 5219 Pinners 12 SA 5216 to SA 5246 Manifolds 18 SA 5247 to SA 5263 Manifolds 19 SA 5267 Conductivity cell 36 SA 5268 Distillation unit 41 SA 5271 to SA 5276 Dialyzers 24 SA 5280 Membrane 24 SA 5282 Membranes pre-mount 24 SA 5283 Membranes pre-mount 24 SA 5284 Membranes 24 SA 5290 Valve 25 SA 5291 Tubing 25/29 SA 5292 Fitting and ring 25 SA 5293 Automatic switching valve 25 SA 5295 Micro ph electrode 36 SA 5300 to SA 5308 Coil + heat-exchanger 21 SA 5310 to SA 5318 Coils glass 21 SA 5320 to SA 5329 Coils glass 21 SA 5330 Heat-exchanger 21 SA 5331 Heat-exchanger 21 SA 5332 Heat-exchanger 21 SA 5333 Tube conector 22 SA 5334 Heat-exchanger 21 SA 5335 Heat-exchanger 21 SA 5336 O rings 22 SA 5337 O rings 22 SA 5338 O rings 22 SA 5339 Screw, nylon 22 SA 5344 Heat-exchanger 21 SA 5346 Heat-exchanger 21 SA 5349 Decanting coil 19 SA 5355 Column, glass 25 SA 5357 Column, unfilled 25 SA 5358 Column, filled 25 SA 5359 Tube, glass 25/29 SA 5360 Tube, glass 25/29 SA 5361 Distillation unit, glass 41 SA 5362 Distillation unit, glass 41 SA 5365 Coil quartz 42 SA 5370 Air/Liquid separator 41 SA 5371 Condenser, glass 41

48 Cat. No. Item Page No. Cat. No. Item Page No. SA 5373 Column, unfilled 25 SA 5374 Column, filled 25 SA 5380 Sinker, glass 12 SA 5381 Reagent filter 12 SA 5382 Reagent bottle 12 SA 5383 Container 12 SA 5384 Container 12 SA 5385 Container 12 SA 5386 Bottle 12 SA 5387 Reagent bottle 12 SA 5388 Plastic bottle 12 SA 5389 Container 12 SA 5394 Digester tube 43 SA 5395 Digester tube 43 SA 5396 Digester tube 43 SA 5400 to SA 5415 Sleeves 29 SA 5418 Lubricant 12 SA 5419 Glue for Tygon 12 SA 5421 Fastener Perspex 19/24/25 SA 5423 Fastener nylon 22 SA 5424 Tubing connector 25 SA 5431 to SA 5436 Needles 30 SA 5454 to SA 5458 Nipples 30 SA 5501 Water bath for circulation 45 SA 5504 Connector 30 SA 5505 Cooling/heating bath 45 SA 5521 Reactor 23 SA 5522 Reactor 23 SA 5523 Reactor 23 SA 5524 Reactor 23 SA 5527 O ring and oil 23 SA 5530 Back pressure regulator 25 SA 5531 Reactor 23 SA 5549 Power supply UV-B 42 SA 5551 Lamp UV-A 42 SA 5552 Power supply UV-A 42 SA 5553 Housing for UV-A 42 SA 5554 Connection nipple 42 SA 5556 Lamp for UV-B 42 SA 5557 Coil UV-B 42 SA 5558 Power supply UV-B 42 SA 5559 Housing for UV-B 42 SA 5560 Coil UV-B 42 SA 5561 Coil Boro-Silicate 42 SA 5580 Digester UV-A 42 SA 5590 Digester UV-B 42 SA 5620 Block digester 43 SA 5621 Rack 43 SA 5630 Block digester 43 SA 5640 Block digester 43 SA 5641 Rack 43 SA 5703 Toolkit 13 SA 5705 Glass bottle 25 SA 5706 Waste bottle 25 SA 5707 Overflow bottle 25 SA 5708 Antidote collecting tube 25 SA 5709 Safety air scrubber glass 25 SA 5710 Glass tube 26 SA 5711 Glass tube SA 5720 Reagent bottle 26 SA 5725 Waste bottle 26 SA 5730 Scrubber system 43 SA 5750 Exhaust head 43 SA 5751 Exhaust tube 43 SA 5752 Collection tube 43 SA 5753 Exhaust tube rack 43 SA 5754 PTFE ring 43 SA 5755 Rubber ring 43 SA 5760 Exhaust head 43 SA 5761 Exhaust tube 43 SA 5762 Collection tube 43 SA 5763 Exhaust tube rack 44 SA 5764 PTFE ring 44 SA 5765 Rubber ring 44 SA 5770 Acid resistant tubing 44 SA 5780 Scrubber glassware 44 SA 5781 Wash bottle, glass 13 SA 5782 Bottle container StSt 44 SA 5783 Vacuum pump 44 SA 5785 Mobile tray 44 SA 6054 Electrode solution 35 SA 6055 Electrode solution 35 SA Channel photometer 31 SA 6205 Photometer insert 31 SA 6250 Photometer matrix 31 SA 6255 Photometer insert 31 SA 6260 Photometer insert 32 SA 6270 Turbo matrix photometer 32 SA 6275 Flow cell with debubbler 37 SA 6280 IR detector 36 SA 6310 Fluorimeter 36 SA 6400 to SA 6475 Flow cells 37 SA 6430 Flow cell 36/37 SA 6431 Flow cell 36/37 SA 6443 Flow cell 34/37 SA 6501 to SA 6609 Filters 37 SA 6610 Grey filters 37 SA 6635 Filter 37 SA 6701 Flow cell quartz 34/37 SA 6703 Inlet and outlet tubing 34 SA 6711 Deuterium lamp 34 SA 6712 Deuterium lamp 34 SA 6752 Flow cell holder 34 SA 6801 Filter 34/37 SA 6803 Filter 34/37 SA 6811 Deuterium lamp 34 SA 6850 Photometer UV 34 SA 7031 to SA 7545 Recorder accessories 46 SA 8640 Signal offset compensator 36 SA 9031 Vacuum pump 41 SA 9220 to SA 9240 Manifolds 19 SA 9241 to SA 9245 Manifolds 20 SA 9370 Air/liquid separator 26 SA KIT Analyzer start- up kit 13 SP400 Interface for ph/ise 35

49 Cat. No. Item Page No. SC to SC Chemicals / reagents 15 2CA10095 Safety vessel glass 26 2CA14031 Air restrictor 41 2CA14321 Sleeves Tubing clamp Holder for rinsing vessel Sample needle holder Rinsing vessel Mounting screw Rinsing vessel Dust cover Cup plate Plunger Needle holder Pulley for Z cable Z Cable Rinsing vessel holder Tubing holder Cover plate for valves Cover plate for diluter Spring for Z cable Needle guide Needle guide Sample rack Sample needle Rinsing vessel Purge needle Standards container Sample rack B Sample rack Sample rack Auto diluter station Rinsing pump Auto diluter station Mixing device Mixing device Mixing device Rack for standard containers Rinsing vessel glass Spring, tube guiding Rinsing vessel glass Rinsing pump Sample rack Sample rack Rack for standard containers Sample needle holder Sample needle extension set Upgrade kit Needle guide Needle holder Needle guide Upgrade set Upgrade set Upgrade set Upgrade set Risers for sample rack Holder + standard containers Container for standards Sample rack Exchange set Auto diluter station Cat. No. Item Page No Auto diluter station Mixing device Mixing device Sample needle Purge needle Standards container Sample rack Cable RS Standards insert Cup plate Cup plate Valve electric Upgrade kit B Dust cover Enzyme deactivation unit Enzyme deactivation unit Enzyme deactivation unit Block (empty) Manual operation lever Plunger Plunger Rinsing valve Rinsing valve Rinsing valve Rinsing valve Rinsing valve Rinsing valve Rinsing valve Rinsing valve Pump Pump Pump Pump Handle for pump deck Cogwheel pump side Cogwheel motor side Cogwheel Roller Cage Springs Pump deck Needle block Bubble injector Pump Pump Waste receptacle 11/ Base mounting plate Dust cover Mounting plate Mounting plate Motor Dust cover Bracket Dust cover Pump Dust cover PCB PCB Adaptor cable Manifold holder to Membranes Dialyzer 24

50 Cat. No. Item Page No Dialyzer Dialyzer Dialyzer Cap Cap Mounting clamp 16/ Cap Tube connector Insolation set Heating element Heating element Pt 100 element to Coils for reactor Extension cable to Reactors Controller reactor Controller reactor Controller reactor Heating element Exhaust-head carrier Boiling granules Controller Photometer lamp Chamber reference electrode PCB Cable converter Cable Photometer head Photometer head Cable Flow cell Power supply Power supply Photometer head Photometer head Photometer head Photometer head Start up kit Flame photometer Flame photometer Air compressor silent Extension set Extension set Extension set System controller System controller Extension set Cable Board insert Board insert Board insert Board insert Board insert Extension set Extension set Extension set System controller System controller Extension set Cable Cat. No. Item Page No CFA interface complete Digital matrix detector Digital detector Digital detector Analogue insert Analogue insert Analogue insert System controller extension Upgrade System Controller Socket bench Sampler Extension Support for flow meter Support for distillation unit Dust cover FlowAccess software FlowReport software Capicitor Capicitor Pt100 Sensor Thermal Fuse Thermal switch Socket bench Power cord Power cord Cable RS Cable RS Cable Valve Ball valve Dial Lamp Indication light Lamp Motor Motor Motor Motor Motor Motor Motor Motor Motor Motor Motor Push button Cooling fan Cooling fan PCB Temperature controller Container for standards Container for standards Bottle Bottle Clamp Clamp Mounting clamp Male connector Cap with O-ring Cap with O-ring Cap with O-ring Connector 13/ Connector 14/30

51 Cat. No. Item Page No Syringe 10 ml Syringe 25 ml Syringe 10 ml, salt line Plunger foe syringe Valve block Valve block O-ring O-ring O-ring O-ring O-ring Pump for air injection Tube connector 15 Cat. No. Item Page No Pressure regulator Tube connector Nipple Nipple Clamp for pump tube Tubing Tubing Photometer photocell Photometer photocell Electrode Electrode Cable for ISE detector 35 Notes

52 For more information please contact us;- Headquarters Skalar Analytical B.V. Tel. +31 (0) Tinstraat 12 Fax. +31 (0) AA Breda The Netherlands Internet: USA Skalar, Inc Financial Drive, Suite 180 Norcross, GA Tel. + 1 (1) Toll Free: Fax. + 1 (0) info.usa@skalar.com Germany Skalar Analytic GmbH Gewerbestraße Sud Erkelenz Germany Tel (0) Fax (0) info.germany@skalar.com United Kingdom Skalar (UK) Ltd. Breda House Millfield Industrial Estate Wheldrake, York YO19 6NA Tel (0) Fax (0) info.uk@skalar.com Austria Skalar Analytic GmbH Am Anger 22 A-7451 Oberloisdorf Austria Tel (0) Fax (0) info.austria@skalar.com France Skalar Analytique S.A.R.L. 79, Avenue Aristide Briand Arcueil France Tel (0) Fax (0) info.france@skalar.com Belgium Skalar Belgium bvba Antwerpsestraat Boom Belgium Tel (0) Fax (0) info.belgium@skalar.com or the agent in your country:-

FRACTION COLLECTOR. Microcomputer Controlled CHF122SC

FRACTION COLLECTOR. Microcomputer Controlled CHF122SC FRACTION COLLECTOR Microcomputer Controlled CHF122SC From open column to HPLC liquid chromatography and general liquid samplings, the Super Fraction Collector, model CHF122SC has a wide range of uses.

More information

Operation Manual for the Refractive Index detector VE-3580

Operation Manual for the Refractive Index detector VE-3580 Operation Manual for the Refractive Index detector VE-3580 October 2012 (MAN0446-1.0) (Version 4.3) Page 1 of 32 pages Table of Contents Table of Contents... 3 Notices, Warnings and Definitions... 5 Figures...

More information

Collator series 300/400, 310B Spare parts list

Collator series 300/400, 310B Spare parts list Collator series 300/400, 30B Spare parts list AUGUST 997 Part # 9049 USER INFORMATION T0703 This Spare part list is devided into one Series 300/400 section, one 30 B section and one Paper feeder section.

More information

CM MTC PARTS LIST

CM MTC PARTS LIST 8650 Enterprise Drive, Peosta IA 52068-0050 319-556-7484 / Fax 319-556-1235 CM-2400-0MTC PARTS LIST ENGINE OIL GRADE: ENGINE OIL CAPACITY: PUMP OIL: PUMP OIL CAPACITY: NOZZLE SIZE: 30W 21 oz. MI-T-M #AW-4085-0016

More information

Model KT 53 Cooling incubators with thermoelectric cooling

Model KT 53 Cooling incubators with thermoelectric cooling Model KT 53 Cooling incubators with thermoelectric cooling The KT series combines outstanding performance with impressive energy efficiency and environmental friendliness. The cooled incubators of the

More information

Bartels Micropumps. ( ) Rev. 2.8

Bartels Micropumps. ( ) Rev. 2.8 EN Bartels Micropumps Micropumps transporting the tiniest amounts of gases or liquids can be considered the heart of microfluidics. In many sectors they have become indispensable. Dosing lubricants, feeding

More information

Model KT 115 Cooling incubators with thermoelectric cooling

Model KT 115 Cooling incubators with thermoelectric cooling Model KT 115 Cooling incubators with thermoelectric cooling The KT series combines outstanding performance with impressive energy efficiency and environmental friendliness. The cooled incubators of the

More information

AristoMig U320w 208/230/400/460/475/500 V 3~ 50/60 Hz With cooling unit and central connection

AristoMig U320w 208/230/400/460/475/500 V 3~ 50/60 Hz With cooling unit and central connection Spare parts list Edition 060727 Valid for serial no. 310 -xxx -xxx, 445 -xxx -xxx, 620 -xxx -xxx The AristoMig 450 power source is renamed: New name Old name Mig 4500i AristoMig 450 Mig U4500i AristoMig

More information

Model KBF 115 Constant climate chambers with large temperature / humidity range

Model KBF 115 Constant climate chambers with large temperature / humidity range Model KBF 115 Constant climate chambers with large temperature / humidity range The BINDER KBF is the specialist for unconditionally reliable stability testing and precise maintenance of constant climate

More information

Orbit TM DIGITAL SHAKERS

Orbit TM DIGITAL SHAKERS Orbit TM DIGITAL SHAKERS INSTRUCTION MANUAL Models P2, P4, M60, 300, 1000, 1900 Labnet International PO Box 841 Woodbridge, NJ 07095 Phone: 732 417-0700 Fax: 732 417-1750 email: labnet@labnetlink.com 2

More information

Model KT 53 Refrigerated incubators with thermoelectric refrigeration

Model KT 53 Refrigerated incubators with thermoelectric refrigeration Model KT 53 Refrigerated incubators with thermoelectric refrigeration The KT series combines outstanding performance with impressive energy efficiency and environmental friendliness. The refrigerated incubators

More information

Model KBF 1020 Constant climate chambers with large temperature / humidity range

Model KBF 1020 Constant climate chambers with large temperature / humidity range Model KBF 1020 Constant climate chambers with large temperature / humidity range The BINDER KBF is the specialist for unconditionally reliable stability testing and precise maintenance of constant climate

More information

Contents Section 9, Illustrated Parts

Contents Section 9, Illustrated Parts Contents Section 9, Illustrated Parts Figures 9-1. Parts of RT7... 9-5 9-2. RT7 Drive Assembly... 9-9 9-3. RT7 Refrigeration System... 9-10 9-4. Parts of RT7 PLUS... 9-15 9-5. RT7 PLUS Drive Assembly...

More information

Model FP 240 Drying and heating chambers Classic.Line with forced convection and program functions

Model FP 240 Drying and heating chambers Classic.Line with forced convection and program functions Model FP 240 Drying and heating chambers Classic.Line with forced convection and program functions A BINDER material test chamber with mechanical convection of the FP series provides reliably short drying

More information

Customer Responsibilities. Important Customer Information Infinity LC/1260 Infinity LC Site Preparation Checklist

Customer Responsibilities. Important Customer Information Infinity LC/1260 Infinity LC Site Preparation Checklist 1290 Site Preparation Infinity LC/1260 Checklist Infinity LC Thank you for purchasing an Agilent instrument. To get you started and to assure a successful and timely installation, please refer to this

More information

Flash-Point with Closed Cup - Abel Method - ABA 4 (automatic)

Flash-Point with Closed Cup - Abel Method - ABA 4 (automatic) Flash-Point with Closed Cup - Abel Method - ABA 4 (automatic) ISO 1516, ISO 1523, ISO 13736, DIN 51755-1, DIN 53213 (obs.), EN 456 (obs.), EN 924, IP 113 (obs.), IP 170, IP 304-1 (obs.), IP 304-2 (obs.),

More information

Model KBF P 240 Humidity test chambers with ICH-compliant light source

Model KBF P 240 Humidity test chambers with ICH-compliant light source Model KBF P 240 Humidity test chambers with ICH-compliant light source The KBF P humidity test chamber, equipped with ICH-compliant light source, is an expert when it comes to photostability tests and

More information

CM MVC & CM MHC PARTS LIST

CM MVC & CM MHC PARTS LIST 8650 Enterprise Drive, Peosta IA 52068 319-556-7484 / Fax 319-556-1235 CM-2400-0MVC & CM-2403-0MHC PARTS LIST (After Serial #215703) Vanguard Engine Oil Grade: Vanguard Engine Oil Capacity: Honda Engine

More information

Hotplate/Stirrers. Performance, Selection, Control

Hotplate/Stirrers. Performance, Selection, Control Hotplate/Stirrers Performance, Selection, Control Professional Hotplates, Stirrers and Hotplate/Stirrers Display for speed, temperature, and time External temperature probe Electronic stir brake Safety

More information

Customer Responsibilities. Important Customer Information. Agilent InfinityLab LC Series Site Preparation Checklist

Customer Responsibilities. Important Customer Information. Agilent InfinityLab LC Series Site Preparation Checklist Agilent Site Preparation InfinityLab Checklist LC Series Thank you for purchasing an Agilent instrument. To get you started and to assure a successful and timely installation, please refer to this specification

More information

Model KBF 720 Constant climate chambers with large temperature / humidity range

Model KBF 720 Constant climate chambers with large temperature / humidity range Model KBF 720 Constant climate chambers with large temperature / humidity range BENEFITS Homogeneous climate conditions thanks to APT.line technology Automatic water and wastewater management Pressure

More information

Connectivity accessories by Nestor Cables

Connectivity accessories by Nestor Cables Connectivity accessories by Nestor Cables NesCon product family includes essential installation and connection accessories for fibre optic networks, from ODFs to joint closures and terminations. www.nestorcables.com

More information

Model KT 170 Cooling incubators with thermoelectric cooling

Model KT 170 Cooling incubators with thermoelectric cooling Model KT 170 Cooling incubators with thermoelectric cooling BENEFITS Safe and reproducible incubation conditions even at high environmental conditions Disinfection routine at 100 C Energy efficient, environmentally

More information

Model CB 160 CO 2 incubators with hot air sterilization and heat sterilizable CO 2 sensor

Model CB 160 CO 2 incubators with hot air sterilization and heat sterilizable CO 2 sensor Model CB 160 CO 2 incubators with hot air sterilization and heat sterilizable CO 2 sensor The BINDER CB series CO 2 incubator is the premium class among the CO 2 incubators. It is suitable for all sensitive

More information

A PASSION FOR PERFECTION. OktaLine. The Power Pump Portfolio. Roots Pumps for Every Low and Medium Vacuum Application.

A PASSION FOR PERFECTION. OktaLine. The Power Pump Portfolio. Roots Pumps for Every Low and Medium Vacuum Application. A PASSION FOR PERFECTION OktaLine The Power Pump Portfolio. Roots Pumps for Every Low and Medium Vacuum Application. OktaLine The Power Pump Portfolio. Roots Pumps for Every Low and Medium Vacuum Application.

More information

OZONESONDE FLIGHT PREPARATIONS

OZONESONDE FLIGHT PREPARATIONS OZONESONDE FLIGHT PREPARATIONS 2 Table of Contents Notes... 3 A week before flight preparations... 4 Changing the sensor solution... 4 Measuring background current... 5 Day of flight preparation... 7 Closing

More information

Briggs&Stratton 44Q B1

Briggs&Stratton 44Q B1 Accessories IPL, Briggs&Stratton 44Q777-1272-B1, 2010-03 Briggs&Stratton 44Q777-1272-B1 Spare parts Ersatzteile Pièces détachées Reserve onderdelen Repuestos Reservdelar 48 SHORT BLOCK 1329 REPLACMENT

More information

PARTS LIST FOR CM-1250-A/C 1.5 HP

PARTS LIST FOR CM-1250-A/C 1.5 HP 8650 Enterprise Drive, Peosta IA 52068 563-556-7484 / Fax 563-556-1235 PARTS LIST FOR CM-1250-A/C Motor Specs: Pump Oil: Pump Oil Capacity: Nozzle Size: 1.5 HP / 1 Phase / 115 Volts Mi-T-M #AW-4085-0016

More information

Industrial Monitor Update Kit

Industrial Monitor Update Kit Industrial Monitor Update Kit (Bulletin Number 6157) Installation Instructions 2 Table of Contents Table of Contents Industrial Monitor Update Kit... 3 Overview... 3 Part 1 - Initial Preparation... 5 Part

More information

DATA SHEET Panorama Rudder Indicator, TRI-2

DATA SHEET Panorama Rudder Indicator, TRI-2 DATA SHEET Panorama Rudder Indicator, TRI-2 Class 1 accuracy on CAN version Readable from up to 5 metres Single and dual CAN or analogue interface LED illumination DEIF A/S Frisenborgvej 33 DK-7800 Skive

More information

Read/write head TN-M18-H1147

Read/write head TN-M18-H1147 Threaded barrel, M18 x 1 Chrome-plated brass Every read/write head can communicate with a number of different TURCK data carriers. Powered and operated solely via BLident interface module M12 x 1 male,

More information

Instruction Manual Fixed Speed Vortex Mixer Analog Vortex Mixer Digital Vortex Mixer Pulsing Vortex Mixer

Instruction Manual Fixed Speed Vortex Mixer Analog Vortex Mixer Digital Vortex Mixer Pulsing Vortex Mixer Instruction Manual Fixed Speed Vortex Mixer Analog Vortex Mixer Digital Vortex Mixer Pulsing Vortex Mixer Table of Contents Package Contents............ 1 Warranty............ 1 Installation............

More information

SOGEVAC. Rotary Vane Vacuum Pumps single-stage, oil-sealed, m 3 x h -1 ( cfm) Central Vacuum Supply Systems

SOGEVAC. Rotary Vane Vacuum Pumps single-stage, oil-sealed, m 3 x h -1 ( cfm) Central Vacuum Supply Systems SOGEVAC Rotary Vane Vacuum Pumps single-stage, oil-sealed, 10-1200 m 3 x h -1 (5.9-707 cfm) Central Vacuum Supply Systems 172.02.02 Excerpt from the Product Section C02 Edition 2010 Contents General Product

More information

Liquid Chromatography- Mass Spectrometer Manual

Liquid Chromatography- Mass Spectrometer Manual Liquid Chromatography- Mass Spectrometer Manual Joshua Willis, Elizabeth Sattely Department of Chemical Engineering Stanford University November 6, 2014 Abstract This manual will explain the LC/MS, its

More information

Magnetic Stirrers Magnetic Stirr

Magnetic Stirrers Magnetic Stirr Magnetic Stirrers Heidolph Magnetic Stirrers Product Line features 0 0 0 D 1 1 K 1 K8 HG 1 HG 1 K 2 2 S8 4 safety P/N 503-000-00 504-00011-00 504-03010-00 504-00-00 504-10-00 504-10108-00 504-40000-00

More information

Model ED 400 Drying and heating chambers Classic.Line with natural convection

Model ED 400 Drying and heating chambers Classic.Line with natural convection Model ED 400 Drying and heating chambers Classic.Line with natural convection BENEFITS Uniform drying conditions thanks to APT.line technology Identical test conditions throughout the chamber interior

More information

DS 200 P DS 200 P. Electronic Pressure Switch with Flush Process Connection

DS 200 P DS 200 P. Electronic Pressure Switch with Flush Process Connection with Flush Process Connection piezoresistive pressure sensor up to independent contacts, configurable optional: analogue output Exprotection (for wire) cooling element up to 00 C nominal pressure ranges

More information

THE ULTIMATE DRY CHOICE

THE ULTIMATE DRY CHOICE SMALL DRY PUMPS THE ULTIMATE DRY CHOICE nxds Dry Scroll Pump 6 XDS Scroll Vacuum Pump 68 XDD Diaphragm Vacuum Pump 7 D-LAB Diaphragm Vacuum Pump 75 6. nxds DRY SCROLL PUMP THE ULTIMATE DRY CHOICE With

More information

Infra-Red Vortex-Evaporator. User manual Version 3.4

Infra-Red Vortex-Evaporator. User manual Version 3.4 CombiDancer Infra-Red Vortex-Evaporator User manual Version 3.4 Seestrasse 204a, CH-8806 Baech / SZ, Switzerland Tel. +41 44 786 80 20, Fax +41 44 786 80 21 E-mail: mail@hettich-ag.ch, Internet: http://www.hettich-ag.ch

More information

Model CB 60 CO 2 incubators with hot air sterilization and heat sterilizable CO 2 sensor

Model CB 60 CO 2 incubators with hot air sterilization and heat sterilizable CO 2 sensor Model CB 60 CO 2 incubators with hot air sterilization and heat sterilizable CO 2 sensor The BINDER CB series CO 2 incubator is the premium class among the CO 2 incubators. It is suitable for all sensitive

More information

ENCODER. Incremental Angle Transducer. Series A36, A58. Key-Features:

ENCODER. Incremental Angle Transducer. Series A36, A58. Key-Features: ENCODER Incremental Angle Transducer Series A36, A58 Key-Features: Content: Technical Data A36...2 Technical Data A58...4 Elektrical Data...6 Accessories...7 Measuring Wheels...8 Order Code...9 - Incremental

More information

Model ED 23 Drying and heating chambers Classic.Line with natural convection

Model ED 23 Drying and heating chambers Classic.Line with natural convection Model ED 23 Drying and heating chambers Classic.Line with natural convection The strengths of a BINDER ED series drying chamber include routine drying and sterilization tasks up to 300 C. Thanks to the

More information

eblot L1 Protein Transfer System Fast Wet Transfer System for Mini Gels

eblot L1 Protein Transfer System Fast Wet Transfer System for Mini Gels eblot L1 Protein Transfer System Fast Wet Transfer System for Mini Gels Table of Contents Components and Initial set up Warranty 1 1. Instrument Overview 1.1 Instrument Overview 1. Instrument Specification

More information

Prodigy Eclipse ECC and EH222 Service Parts EH222 Cabinet - C Series

Prodigy Eclipse ECC and EH222 Service Parts EH222 Cabinet - C Series This part list contains the service parts for the Eclipse ECC 800 and 000 systems. Prodigy Plus D Series production began in late 0. The models that are covered include: EH - head ECC0800 - condensing

More information

DMP 331Pi. Precision. Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm. Pressure Transmitter.

DMP 331Pi. Precision. Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm. Pressure Transmitter. Precision Pressure Transmitter Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm Version with cooling element accuracy according to IEC 0770: 0. % FSO Precision Pressure

More information

03-Durchfuehren_RZ_0708_EN.qxd:03-Durchfuehren GB.qxd :06 Uhr Seite 200 Feed-through

03-Durchfuehren_RZ_0708_EN.qxd:03-Durchfuehren GB.qxd :06 Uhr Seite 200 Feed-through Feed-through Feed-through FEED-THROUGH Series Size Page Rotary Feed-through for Robots DDF 202 DDF 031 206 DDF 040 208 DDF 040-1 210 DDF 050 212 DDF 050-1 214 DDF 063 216 DDF 080 218 DDF 080-1 220 DDF

More information

SUHNER QMA SUBMINIATURE CONNECTORS

SUHNER QMA SUBMINIATURE CONNECTORS SUHNER QMA SUBMINIATURE CONNECTORS Description Content Page SUHNER QMA coaxial connectors are available with 50 Ω impedance. The frequency range extends to 11 GHz, depending on the connector and cable

More information

IKA Analytical line Calorimeters C 2000

IKA Analytical line Calorimeters C 2000 Calorimeters C 2000 Analytical line Calorimeters 140 C 2000 basic,, C 2000 basic high pressure and high pressure The C 2000 basic and calorimeters are the newest systems from IKA for determining gross

More information

2.9 Sigma/ 2 Plunger Metering Pumps

2.9 Sigma/ 2 Plunger Metering Pumps .9 Sigma/ Plunger Metering Pumps.9Sigma/ Plunger Metering Pumps.9.1 Sigma Plunger Metering Pumps The Sigma/ motor plunger metering pump has a high-strength inner metal housing for those component parts

More information

Monolith Turntable P/N User's Manual

Monolith Turntable P/N User's Manual Monolith Turntable P/N 27749 User's Manual SAFETY WARNINGS AND GUIDELINES Please read this entire manual before using this device, paying extra attention to these safety warnings and guidelines. Please

More information

Basic Vortex Mixer Standard Vortex Mixer Advanced Vortex Mixer Pulsing Vortex Mixer

Basic Vortex Mixer Standard Vortex Mixer Advanced Vortex Mixer Pulsing Vortex Mixer Instruction Manual Manual Basic Vortex Mixer Standard Vortex Mixer Advanced Vortex Mixer Pulsing Vortex Mixer Table of Contents Package Contents............... 1 Warranty............... 1 Installation...............

More information

Click & Go. LWL-NE4-Katalog. Click & Go Modular Solutions. Subject to technical changes! 1

Click & Go. LWL-NE4-Katalog. Click & Go Modular Solutions. Subject to technical changes! 1 Modular Solutions Subject to technical changes! 1 Since 1986, braun telecom has stood for continuity and competence in broadband communication and has become one of the leading suppliers of products and

More information

DS 400 P. Intelligent Electronic Pressure Switch in Hygienic Stainless Steel Ball Housing. on hygienic process connections

DS 400 P. Intelligent Electronic Pressure Switch in Hygienic Stainless Steel Ball Housing. on hygienic process connections Intelligent Electronic Pressure Switch in Hygienic Stainless Steel Ball Housing Description The electronic pressure switch is the successful combination of hygienic process connections with flush welded

More information

Model KMF 240 Constant climate chambers with expanded temperature / humidity range

Model KMF 240 Constant climate chambers with expanded temperature / humidity range Model KMF 240 Constant climate chambers with expanded temperature / humidity range BENEFITS Homogeneous climate conditions thanks to APT.line technology Automatic water and wastewater management Humidification

More information

ROTARY EVAPORATOR BOECO ROTARY EVAPORATOR RVO 400 SD

ROTARY EVAPORATOR BOECO ROTARY EVAPORATOR RVO 400 SD ROTARY EVAPORATOR BOECO ROTARY EVAPORATOR RVO 400 SD With digital display and control Water or oil bath Motorized lift Built in vacuum controler Variable inclination angle of evaporating flask With vertical

More information

Optical Cryostat - Omniplex TM

Optical Cryostat - Omniplex TM The Omniplex TM, DE204*F-FMX-19OP, is a top loading optical cryostat with the ARS manufactured DE-204 cryocooler. The ARS Omniplex TM systems features large optical access and quick sample change. The

More information

Vortex Mixers. Mini Vortex Mixers Heavy-Duty Vortex Mixers Microplate Vortex Mixers Multi-Tube Vortex Mixers. Asia Pacific

Vortex Mixers. Mini Vortex Mixers Heavy-Duty Vortex Mixers Microplate Vortex Mixers Multi-Tube Vortex Mixers. Asia Pacific Vortex Mixers Mini Vortex Mixers Heavy-Duty Vortex Mixers Microplate Vortex Mixers Multi-Tube Vortex Mixers Asia Pacific Mini Vortex Mixers Four Mini Vortex Mixer models for gentle to high-speed mixing

More information

SPECIFICATION. Spec No : VSS-1402-CS603B

SPECIFICATION. Spec No : VSS-1402-CS603B SPECIFICATION Spec No : VSS-1402-CS603B 1. INTRODUCTION 1.1. General This specification covers the design requirements and characteristics required of fiber optic splice closures to be used on fiber optic

More information

Okta 1000, Roots pump without motor

Okta 1000, Roots pump without motor Okta 1000, Roots pump without motor Okta 1000, Roots pump without motor Similar Image High-performance Roots pump with a pumping speed of 590 to 1,775 m 3 /h Without motor (coupling and motor lantern are

More information

FELIX3.1 assemblymanual

FELIX3.1 assemblymanual FELIX3.1 assemblymanual Assemblymanualfor: FELIX3.1Single FELIX3.1Dual copyrightinformation Thisdocumentcontainsproprietaryinformationthatisprotectedbycopyright. nopartofthisdocumentmaybephotocopied,reproduced,ortranslatedtoanotherlanguagewithoutthepriorwritenconsentoffelixroboticsbv.

More information

Benchtop performance in a compact footprint

Benchtop performance in a compact footprint Benchtop performance in a compact footprint SMALL HETTICH HEMATOCRIT CENTRIFUGE HAEMATOKRIT 200 HAEMATOKRIT 200 Fast and reliable haematocrit determination Hematocrit determination with standard capillaries

More information

This document is a reference document that shows the menus in the 5500sc, 9610sc and 9611sc analyzers. There are 3 top-level menus:

This document is a reference document that shows the menus in the 5500sc, 9610sc and 9611sc analyzers. There are 3 top-level menus: Controller menus 5500sc, 9610sc and 9611sc analyzers DOC273.53.80566 Introduction This document is a reference document that shows the menus in the 5500sc, 9610sc and 9611sc analyzers. There are 3 top-level

More information

2100, 2200, 4100, 6200, MPB Series Side Mount Drive Package for Light Load 60 Hz Gearmotors

2100, 2200, 4100, 6200, MPB Series Side Mount Drive Package for Light Load 60 Hz Gearmotors 00, 00, 400, 600, MPB Series Side Mount Drive Package for Light Load 60 Hz Gearmotors Installation, Maintenance & Parts Manual DORNER MFG. CORP. INSIDE THE USA OUTSIDE THE USA P.O. Box 0 975 Cottonwood

More information

8D with High Frequency Coaxial Contact

8D with High Frequency Coaxial Contact 8D Series M Coaxial Contacts 8D with High Frequency Coaxial Contact robust and powerfull coaxial High Frequency transmission (M) now available in any size 8 SOURIU insert of D38999 Series III. Spring HF

More information

WQ Series Water Quality Bench top Meters

WQ Series Water Quality Bench top Meters USER GUIDE WQ Series Water Quality Bench top Meters Model WQ500 ph, ORP and Temperature Model WQ510 ph, ORP, Conductivity, TDS, Salinity, & Temperature Model WQ530 ph, ORP, Conductivity, TDS, Salinity,

More information

EXPlora. Introduction

EXPlora. Introduction Introduction EXPlora The EXPlora range is most suited to manufacturers of ancillary electrical equipment such as motors, pumps, lighting equipment, process and control gear for use in factories and plant

More information

AU5800 Every Other Week or Every 3,000 Samples (ISE) Maintenance. AU5800 Weekly (Analyzer and ISE) Maintenance

AU5800 Every Other Week or Every 3,000 Samples (ISE) Maintenance. AU5800 Weekly (Analyzer and ISE) Maintenance AU5800 Every Other Week or Every 3,000 Samples (ISE) Maintenance Step 1 Action Perform the Manually Clean the ISE Mix Bar, Liquid Level Sensors, Sample Pot and Sample Pot Tubing procedure AU5800 Weekly

More information

Speed Performance Reliability. Medicinal Chemistry Natural Products Peptides & Polymers Organic Synthesis Purifications

Speed Performance Reliability. Medicinal Chemistry Natural Products Peptides & Polymers Organic Synthesis Purifications Automated Flash Chromatography Systems Medicinal Chemistry Natural Products Peptides & Polymers Organic Synthesis Purifications Speed Performance Reliability CombiFlash Rf - Making Fl Improve Your Productivity

More information

Immersion Pumps HCT (High Chem) sealless

Immersion Pumps HCT (High Chem) sealless Immersion Pumps HCT (High Chem) sealless 1-6004-US Centrifugal pumps of plastic for a wide variety of industrial fluids Technical data Delivery rate Q max = 120 l/min Delivery head H max = 32 m Temperature

More information

CHEMICALLY RESISTANT DIAPHRAGM GAS SAMPLING PUMPS

CHEMICALLY RESISTANT DIAPHRAGM GAS SAMPLING PUMPS CHEMICALLY RESISTANT DIAPHRAGM GAS SAMPLING PUMPS DATA SHEET N 922 EX Concept The diaphragm pumps from KNF are based on a simple principle an elastic diaphragm, fixed on its edge, moves up and down its

More information

3700 Portable Sampler

3700 Portable Sampler 3700 Portable Sampler This pocket guide is not intended to replace the instruction manual. Read the instruction manual thoroughly before operating the sampler. COPYRIGHT 1991 by Teledyne Isco, 4700 Superior

More information

Duo 65 M, 3-phase motor, 3TF, 230/400 V, 50 Hz; 265/460 V, 60 Hz

Duo 65 M, 3-phase motor, 3TF, 230/400 V, 50 Hz; 265/460 V, 60 Hz Duo 65 M, 3-phase motor, 3TF, 230/400 V, 50 Hz; 265/460 V, 60 Hz Duo 65 M, 3-phase motor, 3TF, 230/400 V, 50 Hz; 265/460 V, 60 Hz Similar Image Dual-stage, high-performance rotary vane pump with a pumping

More information

Roots pumps with a pumping speed of 280 to 840 m 3 /h: Okta 500 DUO DN1 DN B A

Roots pumps with a pumping speed of 280 to 840 m 3 /h: Okta 500 DUO DN1 DN B A 3.1 Vacuum generation / / Convection cooled OktaLine Okta 500 with a pumping speed of 280 to 840 m 3 /h: High-performance Roots pump with a pumping speed of 280 to 840 m 3 /h With 3-phase motor, IE2 No

More information

Read/Write Head TN-M30-H1147

Read/Write Head TN-M30-H1147 Threaded barrel, M30 x 1.5 Chrome-plated brass /S2503 Connectors /S2500 Connectors Type designation Ident no. 7030004 Mounting conditions Non-flush Ambient temperature -25 +70 C Operating voltage 10 30

More information

Mechanical flow switch for On/Off control

Mechanical flow switch for On/Off control Mechanical flow switch for On/Off control Economic integration in pipe systems without any additional piping Magnetic measuring principle Mechanical adjustment of setpoint Type 8010 can be combined with...

More information

M SERIES DISPENSER M SERIES DISPENSER

M SERIES DISPENSER M SERIES DISPENSER M SERIES DISPENSER PART NUMBER 5006621 M SERIES DISPENSER M SERIES DISPENSER... M - 1 M15 TOP EXPLODED VIEW... M - 2 M15 TOP PARTS LIST... M - 3 M15 BASE EXPLODED VIEW... M - 4 M15 BASE PARTS LIST... M

More information

DENTAL LABORATORY EQUIPMENT

DENTAL LABORATORY EQUIPMENT DENTAL LABORATORY EQUIPMENT Ceramic furnaces Ceramic furnaces designed and manufactured to ensure the best performance and reliability for each kind of ceramic. With electronic vacuum control. With large

More information

Enterview 2 / Enterview 2V 4 WIRE VIDEO DOORPHONE SYSTEM

Enterview 2 / Enterview 2V 4 WIRE VIDEO DOORPHONE SYSTEM Enterview / Enterview V WIRE VIDEO DOORPHONE SYSTEM INSTALLATION AND OPERATION. Introduction This Video doorphone System is an easy-to-use system offering many benefits and conveniences, such as relieving

More information

Service Parts Diagrams. For Model: 10/20/09 Service Parts Diagrams for the Rear Projection SMART Board 3000i-DV Interactive Whiteboard 1

Service Parts Diagrams. For Model: 10/20/09 Service Parts Diagrams for the Rear Projection SMART Board 3000i-DV Interactive Whiteboard 1 Service Parts Diagrams For Model: 000i-DV with the serial NEC MT060 numbers Serial greater numbers than 000 000i-DV-09000 to 0999 0/0/09 Service Parts Diagrams for the Rear Projection SMART Board 000i-DV

More information

721N Spectrophotometer. Operating Manual

721N Spectrophotometer. Operating Manual 721N Spectrophotometer Operating Manual TABLE OF CONTENTS 1. APPLICATIONS AND FEATURES... 3 2. SPECIFICATIONS AND STANDARD ACCESSORIES... 4 3. PRODUCT APPEARANCE AND FUNCTION KEYS... 6 4. INSTALLATION...

More information

Immersion Pumps HCT (High Chem) sealless EN

Immersion Pumps HCT (High Chem) sealless EN Immersion Pumps HCT (High Chem) sealless 1 6004 EN Centrifugal pumps of plastic for a wide variety of industrial fluids Technical data Delivery rate Q max = 120 l/min Delivery head H max = 32 m Temperature

More information

ENCODER. Incremental Angle Transducer. Series A36, A58. Key-Features:

ENCODER. Incremental Angle Transducer. Series A36, A58. Key-Features: ENCODER Incremental Angle Transducer Series A36, A58 Key-Features: Content: Technical Data A36...2 Technical Data A58...4 Elektrical Data...6 Accessories...7 Measuring Wheels...8 Order Code...9 - Incremental

More information

Cylindrical Photoelectric Sensor CY-100 SERIES

Cylindrical Photoelectric Sensor CY-100 SERIES Cylindrical Photoelectric Sensor CY-00 SERIES Listing (2 m cable length type only) Features Wide product range Shape: Standard type Side view type Connector: 2 m cable length type M2 plug-in connector

More information

Stark Spectroscopy Deanna s Experimental Procedure NWU Hupp Lab Fall 2003

Stark Spectroscopy Deanna s Experimental Procedure NWU Hupp Lab Fall 2003 Stark Spectroscopy Deanna s Experimental Procedure NWU Hupp Lab Fall 2003 1. Generate mixed-valent state of compound check in 1mm cell. Ideally want Abs 1. 2. Setting up the instrument New Dewar i) Approx.

More information

SPECIFICATION FIBER OPTIC SPLICE CLOSURE. Spec No : VSS-1007-BS403A-04A/SD. VSS-0107-BS403A-04A/SD R & D Center Manufacturing Division

SPECIFICATION FIBER OPTIC SPLICE CLOSURE. Spec No : VSS-1007-BS403A-04A/SD. VSS-0107-BS403A-04A/SD R & D Center Manufacturing Division SPECIFICATION FIBER OPTIC SPLICE CLOSURE Model Spec. No. Distribution Depts. VSOF-BS403A VSS-0107-BS403A-04A/SD R & D Center Manufacturing Division Sales Division Management Division Revision 10. 07 (Rev.4)

More information

Cooling systems for ORBIMAT

Cooling systems for ORBIMAT Cooling systems for ORBIMAT ORBICAR W trolley with integrated liquid cooling The ORBICAR W trolley is the perfect accessory for the Orbitalum 300 A power supplies due to the integrated liquid cooling.

More information

10 PDUs 19 PDUs Zero-U PDUs

10 PDUs 19 PDUs Zero-U PDUs 128, av. du Maréchal-de-Lattre-de-Tassigny - 87045 LIMOGES Cedex - France Tel: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 www.legrand.com 10 PDUs Page 1. GENERL CHRCTERISTICS...1 2. EQUIPMENT ND PERFORMNCE...3

More information

2100/2200/4100/6200 & MPB Series Bottom Mount Drive Pack. for Standard Load Parallel Shaft 60 Hz Gearmotors

2100/2200/4100/6200 & MPB Series Bottom Mount Drive Pack. for Standard Load Parallel Shaft 60 Hz Gearmotors 00/00/400/600 & MPB Series Bottom Mount Drive Pack. for Standard Load Parallel Shaft 60 Hz Gearmotors Installation, Maintenance & Parts Manual DORNER MFG. CORP. INSIDE THE USA OUTSIDE THE USA P.O. Box

More information

SERIES BNC 50, COAXIAL MINIATURE CONNECTORS

SERIES BNC 50, COAXIAL MINIATURE CONNECTORS SERIES BNC 50, COAXIAL MINIATURE CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER BNC is still one of the most popular connector series, featuring a two stud bayonet coupling mechanism, which is particularly

More information

M-8460Se Printer Standard Unit

M-8460Se Printer Standard Unit M-8460Se Printer Standard Unit Parts List Page 1-1 P/N 9001090 Table of Contents M-8460Se Spare Parts List Page Frame Assembly...3 Print Head Assembly...8 Ribbon Assembly... 11 Platen Frame Assembly...14

More information

HIGH VACUUM PUMPS. Hybrid Turbomolecular Pumps. ATH series. Adixen by Alcatel Vacuum Technology

HIGH VACUUM PUMPS. Hybrid Turbomolecular Pumps. ATH series. Adixen by Alcatel Vacuum Technology H I G H V A C U U M P U M P S Adixen by Alcatel Vacuum Technology Hybrid Turbomolecular Pumps 139 Introduction Alcatel offers the of hybrid turbomolecular pumps with pumping speeds ranging from 30 to 300

More information

CME500 SERVICE PARTS

CME500 SERVICE PARTS This section contains the parts illustrations and parts lists for the CME500. CME500 ice machines are manufactured in both 115 volt, 60 cycle and 220 volt, 50 cycle. When ordering electrical parts, be

More information

DMP 335. Industrial Pressure Transmitter. Welded, Dry Stainless Steel Sensor. accuracy according to IEC 60770: 0.5 % FSO.

DMP 335. Industrial Pressure Transmitter. Welded, Dry Stainless Steel Sensor. accuracy according to IEC 60770: 0.5 % FSO. DMP 5 Industrial Pressure Transmitter Welded, Dry Stainless Steel Sensor accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 6 bar up to 0... 600 bar Output signals -wire: 4... 0 ma -wire:

More information

Optical Distribution Box 300 Installation Guide. Version : R0.0

Optical Distribution Box 300 Installation Guide. Version : R0.0 Optical Distribution Box 300 Installation Guide Document No. : OD16-546-L-01 Version : R0.0 Date: 21-Mar-2018 IMPORTANT INSTRUCTIONS When using fiber optic equipment, basic precautions should always be

More information

FIST-GCOG2-Dx6. Follow all local safety regulations related to optical fiber plant elements.

FIST-GCOG2-Dx6. Follow all local safety regulations related to optical fiber plant elements. FIST-GCOG2 I N S T A L L A T I O N I N S T R U C T I O N TC-986-IP Rev A, Mar 2017 www.commscope.com FIST-GCOG2-Dx6 Content 1 Introduction 2 General 2.1 Abbreviations 2.2 Kit contents 2.3 Tools 2.4 Accessories

More information

SOGEVAC. Rotary Vane Vacuum Pumps single-stage, oil-sealed, m 3 x h -1 ( cfm)

SOGEVAC. Rotary Vane Vacuum Pumps single-stage, oil-sealed, m 3 x h -1 ( cfm) SOGEVAC Rotary Vane Vacuum Pumps single-stage, oil-sealed, 10-1200 m 3 x h -1 (5.9-707 cfm) 172.02.02 Excerpt from the Product Section C02 Edition March 2007 Contents General Product Range, Features and

More information

UNIGAS Hand-held combustion gas analyzer with 3 sensors

UNIGAS Hand-held combustion gas analyzer with 3 sensors UNIGAS 2000 Hand-held combustion gas analyzer with 3 sensors Unigas 2000+ is a professional flue gas analyser for 3 gases: O 2, CO & NO with electrochemical sensors, plus CO 2 and NO x calculated. Description

More information

ACCESSORIES MANUAL PART NUMBER: PRODUCT REVISION: 1 PNP202. Interconnect Box USER'S GUIDE

ACCESSORIES MANUAL PART NUMBER: PRODUCT REVISION: 1 PNP202. Interconnect Box USER'S GUIDE MANUAL PART NUMBER: 400-0109-001 PRODUCT REVISION: 1 PNP202 Interconnect Box USER'S GUIDE INTRODUCTION Your purchase of the PNP202 Interconnect Box is greatly appreciated. We are sure you will find it

More information

Up to 85% higher Service Life due to efficient sealing method.

Up to 85% higher Service Life due to efficient sealing method. Robot Accessories Feeding through Up to 85% higher Service Life due to efficient sealing method. 346 Robot Accessories Feeding through Feeding through DDF 2 Rotary Feed-through Series Size Page DDF 2 348

More information

MDT3 and MDT4 Service Parts

MDT3 and MDT4 Service Parts This parts lists contains part numbers for the service parts available for the MDT and MDT4. They have been manufactured in both 60 Hz and 50 Hz models. The 60 Hz models are: MDTF-A or MDTFA-H MDT4F-A

More information