RGB CONVERTER SPECIFICATION. Car Solutions -. MODEL: RGB-LE-V3 -. PRODUCT CODE : RB www. car-solutions.com

Size: px

Start display at page:

Download "RGB CONVERTER SPECIFICATION. Car Solutions -. MODEL: RGB-LE-V3 -. PRODUCT CODE : RB www. car-solutions.com"

Harvey Taylor
6 years ago
Views:

1 RGB CONVERTER SPECIFICATION -. MODEL: RGB-LE-V3 -. PRODUCT CODE : RB www. car-solutions.com

2 INDEX -. Pre-Caution -. Main Specification -. System Composition Map -. Out-Line Dimension -. MODULE EXTERNAL -. Connector Pin Assignment -. DIPSWOperationProcess Process -. Remote Control Guide -. Products composition -. FAQ

3 -Pre-Caution - You must keep the car key taken off from the car while you work this and finally, connect power of the interface. - When to connect the interface cable, you must keep the power cable taken off. - You must work this at the environment without any static electricity or damages. - All of process on this installation should be done by professionals. - You must not break the labels attached on the board, if it s broken, no warranty. - When you receive this package you have to check whether there s any parts not included and you have to contact us right away. - Our repair service do not accept any problems caused by user s any fault or carelessness.

4 -Main Specification 1. Input Spec. (MULTI VIDEO INTERFACE) -. 2 x CVBS Input (External video source) x CVBS (REAR CAMERA) Input (Rear camera source) -. 1 x Analog RGB Input (Car commander original monitor output) -. 1 x Analog RGB Input (Navigation System output)- OPTION 2. Output Spec x CVBS OUTPUT (Video Out for installing Headrest monitor) -. 1 x RGB OUTPUT(LCD Operation) i -. 1 x Audio Select OUTPUT (For operating A/V sources ex) 12V is come out on V1 port, when AV1 is chosen.) 3. Power Spec. - Input Power : 8VDC ~ 24VDC - Consumption Power : 5WATT, Max 4. Switch Input mode - NAVI/CVBS1,2 Original MUTE Function : Possible to mute each input by operating Dip S/W - Possible to switch Input mode with remote control or toggle switch. - Rear View Camera mode : When to sense rear gear power, be switched to Rear view camera mode (Impossible to switch to rear mode with Toggle S/W or the Remote control) 5. Special Function - Remote Key scanning function (Option If you want to use this function, you have to purchase the remote additionally.) * How to use? Press 4291 buttons of Remote offered, then LED lamp of interface blinks. After that, press any button of A/V source remote such as Navigation, DVD etc. that you want to use. If LED lamp of the interface blinks slowly, It means to succeed and you can use the button that you set for mode change.

5 -System Composition Map NAVIGATION Input (Analog RGB) CVBS1 CVBS2 CVBS (Rear camera) Car Screen Input (CAR MAIN BOARD) Remote ControlSwitch for source toggle & REAR SENSE VIDEO CIRCUIT POWER CIRCUIT MCU VIDEO MUX DISPLAY CVBS OUT Power Input (+8VDC ~ +24VDC) Dip S/W CAR Installation OEM LCD HEADREST MONITOR

6 -Out-Line Dimension 129mm * 75mm * 21mm 75mm 21mm 129mm This can change under manufacturer's circumstance

7 -Module External LED AUDIO-SEL DIP S/W RGB(OUT) OEM(IN) POWER MODE IR V1 V2 R/V NAVI(IN) V-Out This can change under manufacturer's circumstance

8 -Module External NAVI(IN) OEM(IN) RGB(OUT) DIP S/W ADO-SEL POWER MODE IR V1 V2 R/V V-OUT This can change under manufacturer's circumstance

9 -Connector Pin Assignment *NAVI-IN Connect R DATA 2 G DATA 3 B DATA 4 SYNC 5 GND 6 NAVI IR 7 DVD IR *RGB-OEM Connect R Data : Red 2 G Data : Green 3 B Data : Blue 4 Sync : White 5 GND : Black *RGB-OUT Connect B Data : Blue 2 G Data : Green 3 R Data : Red 4 Sync Data : White 5GND : Black 6 ACC : Yellow 7 Video S/W : Orange 8 Not used This can change under manufacturer's circumstance

10 -Connector Pin Assignment *Power Connect GND ( 2 I -Drive 3 F MTX 4N.C 5 ACC 6 R EAR This can change under manufacturer's circumstance

11 -Connector Pin Assignment * Power cable FILTER & FUSE BOX Gray Red Black Orange 990mm Orange Black 990mm Red Gray I - DRV GND ACC LAMP - RV

-DIP SW Operation Process ON : DOWN, OFF : UP #PIN FUNCTION DIP S/W Selection 1 RGB INPUT MUTE 2 CVBS1 MUTE 3 CVBS2 MUTE 4 CAN 5 OEM MUTE 6 INTERLACE 7 REAR MODE 8 SYNC ON GREEN ON : Skipping RGB

12 -DIP SW Operation Process ON : DOWN, OFF : UP #PIN FUNCTION DIP S/W Selection 1 RGB INPUT MUTE 2 CVBS1 MUTE 3 CVBS2 MUTE 4 CAN 5 OEM MUTE 6 INTERLACE 7 REAR MODE 8 SYNC ON GREEN ON : Skipping RGB Mode OFF : RGB Display ON : Skipping CVBS1 OFF : CVBS1 Display ON : Skipping CVBS2 OFF : CVBS2 Display ON : When install to the Cayenne OFF : When install to all of the car ON : Skipping OEM OFF : OEM Display ON : Non-Interlace OFF : Interlace ON : External Rear Camera OFF : OEM Rear Camera ON : Sync On Green (RGSB) OFF : Sync On Green Off DIP S/W Use Example [W211] -. Use Input Mode : CVBS1, Navigation (RGB), Main -. Rear Camera : When to be installed on CVBS 4 DIP S/W : 1 OFF DIP S/W : 2 OFF DIP S/W : 3 ON DIP S/W : 4 OFF (All of the Car except Cayenne) DIP S/W : 5 OFF DIP S/W : 6 OFF DIP S/W : 7 ON (enable CVBS4) DIP S/W : 8 OFF * Caution - If the displayed screen vibrates, please try to operate Dip S/W No. 6 after turning power off.

-Remote Control Guide Power : Mode is changed on only headrest monitor by this button, when front monitor shows Navigation or Rearview camera, Main.

Navi : To change mode to Navigation directly AV1 : To change mode to A/V source you connected to A/V1 directly AV2 : To change mode to A/V source you connected to A/V2 directly AV3 : To change mode

13 -Remote Control Guide Power : Mode is changed on only headrest monitor by this button, when front monitor shows Navigation or Rearview camera, Main. Source : When to change mode, you can change mode by this button. Navi : To change mode to Navigation directly AV1 : To change mode to A/V source you connected to A/V1 directly AV2 : To change mode to A/V source you connected to A/V2 directly AV3 : To change mode to A/V source you connected to A/V3 directly : Increasing OK : Select : Decreasing Menu : To enable OSD Menu 4:3 : To convert screen rate from 4:3 to 16:9 or 16:9 to 4:3 Main : To change to Main mode directly Scan : Not available Mute : Not available Disp : Currency A/V source screen display Reset : To make all value to factory default. Cont. : To adjust Color under OSD (Hot Key) Brt. : To adjust Brightness under OSD (Hot Key)

14 -Products composition Power cable : 1 Audio Select Cable: 1 Mode cable : 1 RGB NAVI : 1 RGB(Out) cable : 1 IR Cable : 1 RGB OEM : 1 Remote Control : 1

15 Installation Structure MONITOR Offered FFC Original FFC Control Box LAMP- RV ACC FMTX I-DRV GND LED V i d e S o S S Y G A S N y G y G N N C /. n N n N O O B G R C D C W C RG B c D R G B c D U U T T P P U U T T 1 2 ADO-SEL DIP S/W RGB(OUT) OEM(IN) RGB CONVERTER(LE) NAVI(IN) POWER MODE IR V1 V2 R/V V-OUT X Solder this wire to the Head Unit for changing mode by original button (Only for Cayenne, W164EU, W211)

16 -FAQ 1. When can not change mode. -. Check if the IR Cable (remote control) is connected or not. -. Check if LED is turned on or not. If it is not turned on, Check if power cable is connected or not. 2. When the screen is displaying only black color. -. Check if 2 nd LED is turned on or not. If it is not turned on, please check the sources that you will connect with the interface is operating well or not. -. Check if interface is connected well. 3. When displayed color of screen is not proper. (If it s too dark or the color is not proper) -. Try to push Reset button on the remote control. If the color of screen keeps on displaying wrong color, you have to ask manufacturer for the problem. 4. When Back-up camera is not displayed d on the screen. -. Turn Dip S/W no.7 on. 5. When the mode you set is not skip. -. Check if Dip S/W is set in proper way. 6. When Main screen on the car is not displayed. -. Check if In/Out cables are connected well. If it keeps showing the same problem, you have to ask manufacturer for the problem. 7. When the screen is displaying only white color. -. Check if out cable is connected well. If it keeps showing the same problem, you have to ask manufacturer for the problem. 8. The case the screen is changed to Main mode despite of choosing Back-up camera mode. -. Check if Dip S/W no.7 is turned on. If it s not, youhavetoturniton turn on. 9. When the screen is blinking or not proper. -. Turn Dip S/W no.6 on.

VL6-CADVD. Specification & Installation. Compatible with Comand APS DVD (manufactured by Siemens/VDO) also referred to by Mercedes Benz as NTG1

VL6-CADVD. Specification & Installation. Compatible with Comand APS DVD (manufactured by Siemens/VDO) also referred to by Mercedes Benz as NTG1 Updated date: 2017.05.31 Model: RGB-LE-V3.1 / Product code: RB-100126-013 VL6-CADVD Specification & Installation Compatible with Comand APS DVD (manufactured by Siemens/VDO) also referred to by Mercedes