Carbonite Configuration Guide. v11.1

Transcription

1 Configuration Guide v.

2 Document Information Ross Part Number: 0DR-00-. Release Date: September, 0. The information contained in this document is subject to change without notice or obligation. Copyright 0 Ross Video Limited, Ross, CrossOver, Mini, and any related marks are trademarks or registered trademarks of Ross Video Limited. All other trademarks are the property of their respective companies. PATENTS ISSUED and PENDING. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, mechanical, photocopying, recording or otherwise, without the prior written permission of Ross Video. While every precaution has been taken in the preparation of this document, Ross Video assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Microsoft, Windows, and Windows XP are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. NVIDIA and GeForce are trademarks and/or registered trademarks of NVIDIA Corporation in the U.S. and/or other countries. Patents Patent numbers US,0,; US,0,; US,0,; US,0,0 B; US,,; US,9,; US,0,; US,0, B; US,99,09 B; US,9,99 B; US,,9 B; GB,9,9 B; GB,,0 B; and other patents pending. Document Information Configuration Guide (v.)

3 Contents Features... Custom Controls... Device Control... OverDrive Caprica Support... (Fly Key)... Effects Dissolve... General Purpose Interface (GPI)... LiveEDL... Media-Store... MediaWipe... UltraChrome... MemoryAI Recall Mode... Memory System... Effect System... Half... Mini... MediaManager... MultiViewer... Clean Feed Output... MultiScreen... Pattern and Matte/Wash Generators... Matte/Wash Generator... Tally Outputs... Panel Dimensions... CB... CBS... CB... CBS... CBS...9 CBX...9 Frame Dimensions...0 Frame...0 extreme Frame...0 Black Frame...0 Product Comparison... Black Control Panels... Frame... Standard System...9 Black Control Panel...9 Frame...9 System Options...0 Specifications... Switcher Resources... Environmental Characteristics... Video Input Specifications... Video Output Specifications... Audio Specifications... Jitter... System Timing... Power Consumption Control Panel... Power Consumption Frame... Option Summary... Frame Options... Control Panel Options... Configuration Guide (v.) Contents

4 Designed for Live! builds on the Ross Video reputation for designing switchers for live studios, trucks, and post-production. At the center of the action, it is important that the switcher be powerful and versatile, yet maintain its ease of operation. This frees the operator to concentrate on the programming instead of the equipment, delivering a cleaner, more professional production. extreme represents the cutting edge in video production innovation. By combining the video manipulation power of the video production switcher with the robust signal routing and management of the NK-G-X router you have a combination that offers tremendous flexibility in operation and configuration with a significant cost savings. Whether it is a mobile application where space is paramount, or an event based application where destination based routing is the norm, extreme delivers. Black improves on the highly popular series by bringing up to s, Mini outputs, more I/O, dedicated AES audio outputs, and full DashBoard integration with a touchscreen display. All this in the same compact RU frame form factor and intuitive control panel you have come to expect. Designed for Automation! The family of switchers support the highly advanced OverDrive Caprica automated production control system. Caprica takes advantage of the years of device integration that Ross has developed in the large switcher product lines and puts it into an independent server. The Caprica server takes the place of the production switcher for controlling over 00 additional production elements (such as robotics, graphics, audio mixers, servers, etc.), timing the show and creating production macros. Designed for You! With Ross Video products installed in well over countries world-wide, our sales, demonstration, and training people get a lot of ongoing feedback from customers. This feedback is carefully tracked and considered in the design and feature-set development of our products. Key members of the design teams are part of an ongoing program in which they provide product demonstrations, assist with product installation, and train operators. As a result, the complete line of Ross Video products continues to offer our legendary combination of power and ease of use. Join our Growing Customer Base! Deciding to purchase a switcher will put you in good company, with many thousands of Ross switchers installed worldwide. continues to build on a family of multi-definition switchers that have been delivering the goods every day in live sports, stadium scoreboards, and drama productions, mobile productions, as well as local and network newscasts. Experience Great Support! Ross has designed and manufactured production switchers for over 0 years, with significant year over year growth for the past 0 years. We believe that an important factor of our success is our focus on providing a superior customer experience. We continually benchmark our warranty and technical support to ensure that they are the best in the industry. We hope that you join the many thousands of satisfied video professionals around the world that are proud owners of Ross production switchers. Please do not hesitate to contact us with any questions or comments you have related to this Configuration Guide at Tel: +---, Fax: +--- or us at solutions@rossvideo.com. Designed for Linear! The family of switchers continues to build on Ross Video's reputation for setting the standard for multi-definition linear editing suites. The traditional layout and familiar controls of other Ross switchers provide the power and ease of use you have come to expect. cleanly connects to virtually any editor using the industry standard GVG00/0 protocols. Configuration Guide (v.)

5 Features Thank you for your interest in the Ross Series Multi-Definition Live Production Switcher. The series builds on the Ross reputation for designing switchers that fit the needs of any production environment. Custom Controls This feature brings the power of macros to the switcher operator. Button presses, menu selections, event commands, or even the switcher state can be recorded to a custom control with pauses or holds between the events. A simple button press can play these events back again. Step through complex show openings as easily as pressing Custom Control buttons,, then. Device Control The switcher can control a number of external devices, such as video servers and robotic cameras. For a complete list of supported devices, and information on how to set up and control these devices, visit the Ross Video website (rossvideo.com/production-switchers/carbonite/interface-list). OverDrive Caprica Support can be controlled from OverDrive using the Caprica interface. This interface allows OverDrive to perform memory recalls, transitions, and run custom controls on the switcher. For information on setting up Caprica to interface with the switcher, refer to the documentation that came with your Caprica server. The switcher must be in a. mode or have s installed to be controlled by Caprica. (Fly Key) The advanced D comes standard with each switcher, and can be used for performing over the shoulder, or picture in picture shots. This allows all key types to be zoomed, cropped, and repositioned horizontally and vertically to create the look you want, or you can use one of the useful pre-built D effects to perform D background transitions. The + and MultiMedia frames have channels of, or channels in a G Mini or G. switcher mode. The and extreme frames can select between channels of and 0 FSFCs, or channels of and FSFCs. Effects Dissolve The Effects Dissolve feature allows you to interpolate from one memory to another using a memory recall. The switcher will interpolate from the starting memory to the destination memory, creating a smooth, two key frame effect. Source Effect Destination Effect Only elements such as clip level and pattern position can be interpolated in the effects dissolve. Other elements, such as crosspoint selection, pattern, and next transition data are recalled first, and then the switcher will slew to the recalled memory. An effects dissolve can be performed on as many elements and s as required, based on the memory that is being recalled. General Purpose Interface (GPI) The switcher is equipped with GPI I/Os that can be assigned as either an input or output independently. The GPI inputs allow the switcher to interface with peripheral equipment such as editors. Each GPI input can be used to perform simple editing and switcher functions such as fade to black or an auto transition. LiveEDL Edit Decision Lists (EDL) are files used by non-linear editing (NLE) suites to aid in post-production. Your switcher can capture EDL data in a file that you load into your NLE suite. For information on using the LiveEDL feature, visit the Ross Video Website (rossvideo.com). Media-Store Up to independent channels of still/animations are available switcher-wide, allowing for thousands of full screen stills and logos that can be cached and used on the switcher. Media-Store provides GB of cache. Channels and have GB, and channels and have GB. The number of images cached increases considerably when smaller, non-full screen images like logos are loaded from USB. Configuration Guide (v.) Features

6 MediaWipe A MediaWipe allows you to use an animation from the Media-Store to perform background and key transitions. When the transition starts, the switcher plays the selected animation over top of the background and keys that are being transitioned. A cut is then performed behind the animation to bring up the next shot when the animation ends. UltraChrome The UltraChrome chroma keyers uses advanced video processing technology to provide exceptional blue spill reduction and clean edges, even with difficult source material. Glass, smoke, translucent materials, and natural shadows are handled superbly. There are floating Chroma Keys that are available across all s. MemoryAI Recall Mode We take the guessing out of memory recalls by ensuring that a memory recall will not affect what is currently on-air. MemoryAI uses the content of the memory to configure the Next Transition area and Preview bus for the background and keyers so that the next transition takes the same sources on-air that were on-air in the memory. For example, store a memory that has a key on-air with CAM and CAM selected on the background. When this memory is recalled normally, it pops the same key on-air with CAM and CAM on the background. When the memory is recalled with MemoryAI turned on, CAM is selected on the preset bus, and CAM is selected on a key that is not on-air. The transition area is then set up for a background transition to bring CAM onto the background, take any on-air keys off, and take a key on-air with CAM. Memory System Storage for 00 complete switcher snapshots per, Mini, and MultiScreen comes standard with all switchers. All of these memories can be stored to a USB media drive, providing custom tailored memories for every operator and every show. Effect System The (Multi-level Effect) systems are standard. The number of s depends on the chosen switcher model. Each provides keyers supporting pattern mask, box mask, self-key, linear key, and UltraChrome advanced chroma key for each and is available to each keyer. Half The half option is available for any or extreme switcher and adds a third with limited functionality. Mini MultiScreen Table : Half vs. Full Comparison Floating FSFCs Keyers Key Types Transition Types Pattern Mask Mini Half No No No Auto Select and Self Key Dissolve, Cut, and MediaWipe No Full (if frame supports it) Auto Select, Self Key, Chroma Key, and Key Dissolve, Cut, Wipe,, and MediaWipe The Mini is an additional that is provided with the switcher to perform basic dissolves and cuts. Each Mini has keyers, background, and preset buses. Unlike a full, the Mini only supports dissolves and cuts, restricts key to keys only, and has no preview output. Key on a Mini is the same as an keyer. The Mini shares all the same sources as the. MediaManager The MediaManager allows you to easily manage stills and animations on the switcher in a graphics interface. MultiViewer Each MultiViewer allows you to view up to video sources, in different layouts, from a single output BNC. Any video source on the switcher, including Program, Preview, and Media-Store channels, can be routed to any box on the MultiViewer. All boxes on the MultiViewer output include mnemonic source names and red and green tallies. All and Black switchers come standard with broadcast-quality integrated MultiViewer generators. Features Configuration Guide (v.)

7 Note: If is operating in G video mode, the number of video sources and layouts is reduced. PGM/ PST PGM CLEAN FEED Figure : HD Layouts If is operating in a standard-definition video format, the MultiViewer can be set to output high-definition. In HD output mode, the MultiViewer is only available on specific output BNCs and only supports 9 different layouts. Black automatically outputs high-definition, but each MultiViewer is only available on specific output BNCs. MultiScreen All switchers come standard with integrated MultiScreen generators. Each MultiScreen can break a scene into up to outputs that can be sent to independent projectors or displays to make a unified picture. Integrated edge blending allows you to compensate for the overlap in projector outputs, or the outside bezel of your display. Each screen in the MultiScreen output uses a Mini to create the background and keys of the output. This allows you to have MultiScreen generators with screens each, or MultiScreen generator with or screens. Edge Area MultiScreen Edge Area Key Mini Mini Mini Pattern and Matte/Wash Generators A single pattern generator dedicated to wipes comes standard, and is equipped with 0 classic wipes. Most wipes can be rotated, bordered, multiplied, aspectized, and repositioned. Figure : HD in SD Layouts (0i :) Clean Feed Output Clean feed is typically used for bilingual and live-to-tape productions. It provides a second Program output that is derived from a different location than the standard program output. A frequent application is the recording of shows for later airing without call-in phone numbers inserted. The clean feed output can come from before or between the keyers. Matte/Wash Generator A matte generator and complex wash generator per, capable of multi-color washes comes standard. Any one of the color generators can be assigned to MATTE, or wipe pattern edges. An additional simple color generator is available for an Aux Bus. Tally Outputs The switcher has assignable tally relays located in the rack frame. Each tally can be assigned to any number of combinations of input and output or bus. Configuration Guide (v.) Features

8 Product Comparison + MultiMedia extreme Black Use the following table to compare the different switchers in the product line. Black Control Panels Clean Feed System FSFCs (Max/Min) Input Reference Format Independent Reference Inputs /0 /0 Internal / Black Burst / Tri-Level /0 Control Panel Panel Source Buttons per Control Panel Row Number of Control Panel Rows Number of User Assignable Buttons Total Panel Source Buttons CB CBS CB CBS CBS CBX 9 Independent Reference Outputs MultiViewer Generators Effects Capabilities Keys per D Channels per (Max/Min) Proc Amps and Color Correctors Memory AI No / No No Maximum Number of s Supported UltraChrome Chroma Keys Maximum Number of Mini Engines Custom Control Buttons Storage and Networking USB Media Drive Media-Store Channels (user supplied USB.0) Custom Control Bank Buttons Source and Keyer Mnemonics Legendary Ross Fader Handle with Lifetime Guarantee Positioner Memory Keypad No Engineering and Networking Redundant Power External Link Port No Axis (optional) (not available at this time) Media-Store CACHE Audio Only Playout for Media-Store Ethernet Connectivity Linux OS Animated Logo Players with Audio (requires video and alpha playout) Peripheral Interfacing Device Control OverDrive Caprica Compatible GB GigE Ethernet Connectivity GigE (only is available at this time) Roll Clip Control AMP/RossTalk/GPI Output Frame External Link Ports Serial Ports (RJ) Frame + MultiMedia extreme Black Ethernet Serial Port Expanders Automation and Editor Protocols Comtrol DeviceMaster RTS Series RossTalk/GVG00 Separate Rack Frame GPI I/Os Rack Frame Height RU Tallies Redundant Power (optional) USB Ports (Frame) Video Input/Output Multi-Definition HD/SD 00i 0/9.9, 0p 0/9.9, 00pSF.9//9.9, 00p 9.9 Standard Definition Processing, SDI Inputs (Max) HDMI Inputs (Max) Analog Inputs (Max) SDI Outputs (Max) 0 Product Comparison Configuration Guide (v.)

9 Standard System Whether you have a demanding production environment, or a more modest one, selecting the Multi-Definition Live Production Switcher that is right for you should not be a complicated task. Black Control Panel Select the control panel that meets the needs of your production environment and that utilizes the power of your Black Multi-Definition Live Production Engine. Option CB-PANEL CBS-PANEL Description A single panel row with source and custom control buttons, key select and transition buttons, key type buttons, aux bank buttons, and custom control bank buttons. The same features as the previous panel, but with source and custom control buttons, aux bank buttons, an expanded global memory area, and an effects memory keypad per. Option CF-y CF-yPLUS CF-yPLUS CF-yMM CF-yMM CF-EX- CF-EX- CF-EX-9 CBF- Description The same features as the previous frame, but with inputs. + frame with (y) s and inputs. The same features as the previous frame, but with inputs. MultiMedia frame with (y) s and inputs. The same features as the previous frame, but with inputs. extreme frame with s, inputs, and outputs. The same features as the previous frame, but with outputs. The same features as the previous frame, but with 9 outputs. Black frame with s, inputs, and outputs. CB-PANEL CBS-PANEL CBS-PANEL CBX-PANEL The same features as the CB panel, but with panel rows. The same features as the CBS panel, but with panel rows. The same features as the CBS panel, but with panel rows. The same features as the CBS panel, but with source and custom control buttons and user assignable buttons. Frame When selecting a frame, replace the y with the number of s. For example, CF-PLUS is the option code for a (), input (), + (PLUS) frame. Note: The input MultiMedia frame only supports MultiMedia inputs. Note: Each switcher subsystem in the extreme has a maximum of video inputs and 0 video outputs. Video signals coming into the router must be routed to the inputs of the switcher subsystem for the switcher to have access to them. Similarly, video outputs from the switcher subsystem must be routed to a router output. Option CF-y Description frame with (y) s and inputs. Configuration Guide (v.) Standard System 9

10 System Options Options are typically ordered when the switcher is purchased. However, you can order options if your needs change in the future. Most of our options can be easily installed in the field. You can take comfort in knowing that you can purchase options in the future and that installation at your site will be a smooth process. XPression Live (XDS0-000-CPS) Seamlessly combine the creative power of the Ross XPression Designer software with the ease of use of your Ross switcher. Create stunning still graphics using XPression Designer, and transfer them directly to an media-store channel on the switcher using the RossLinq interface. Up to two () channels with dedicated alpha can be controlled from the XPression Software Client. This feature supports still images only. The XPression Designer requires a computer with a Windows (/ But) operating system and an NVIDIA graphics card. Redundant Power The redundant power supply options provides protection against AC power failure. It allows two external power supplies to receive power from independent power sources. Complete failure of one source, or power supply, will not affect the operation of the switcher in the slightest. If the main AC power fails, the switcher instantly draws power from the remaining source. The transition from one power source to the other is totally transparent and has no effect on the output of the switcher; a critical feature should one power source fail during an on-air broadcast. Option PSU-VA-PIN CF-NK-PG PSU-V.9A-PIN Description Adds a redundant power supply for the, +, and MultiMedia frames, as well as the Black control panels. Adds a redundant power supply for the extreme frame only. Adds a redundant power supply for the Black frame only. Input to Input Upgrade (CF-IN-IN-UPG) This option increases the number of SDI video inputs on the frame from to and the number of MultiMedia inputs on the MultiMedia from to. All inputs can be used direct to air, as key alpha channels, or as chroma key sources. Inputs can be freely assigned to any panel source button or shifted button. They can also be hidden and accessed only as alpha channels or they can be locked out if they are not used. Note: All, +, and MultiMedia frames comes with a full SDI video input BNCs. This upgrade option unlocks the additional BNCs in software. to Upgrade (CF---UPG) This option increases the number of s in your, +, MultiMedia, or extreme switcher from to. Note: The half feature comes standard with the option on these frames. Black comes standard with s and can be upgraded to. Black does not support the half feature. to Upgrade (CBF-ADD-) This option increases the number of s in your Black switcher from to. Video Inputs (CF-NK-IG) This option adds a card to the extreme frame that provides support for additional video inputs. Note: A rear connector (CF-NK-IG-RC) is required for every two CF-NK-IG options. The rear connector provides the BNCs at the back of the frame. Video Outputs (CF-NK-OG) This option adds a card to the extreme frame that provides support for additional video outputs. Note: A rear connector (CF-NK-OG-RC) is required for every two CF-NK-OG options. The rear connector provides the BNCs at the back of the frame. extreme Second Switcher Upgrade (CF-EX-NDSWR-UPG) extreme can be upgraded to include two independent switcher subsystems (switcher A and switcher B). Each switcher subsystem has access to all the inputs and outputs of the router subsystem. A router output can only be assigned to a single switcher output. This upgrade installs the extreme CPU into the second slot, and adds a number of cards to the system to support the switcher. 0 System Options Configuration Guide (v.)

11 This option comes with a secondary Controller card, Breakout Panel, Ethernet Interface card, and GPIO/Tally card with rear module. Caution: The upgrade of the extreme with a second switcher must be limited to service personnel only and must be performed with the frame/chassis in a de-energised state. Important: The extreme second switcher upgrade is only compatible with extreme / NK-G-X frame (00AR-0-xx) running software version.0 or higher. If you do not have this frame or software, or are unsure about the model of your frame, please contact Ross Video Technical Support for more information. SideShot Custom Control Shot Box (CPS-SideShot) This option provides quick access to the first custom controls on the first custom control banks of the switcher. Remote Panels This option provides external control for selecting sources on an Aux bus from a remote panel. There are a number of options for the remote control panels, depending on your requirements. On extreme these panels can be configured to operate as an X-Y, cut-bus or multi-cut bus panel for the router subsystem, or as a control panel to select sources any bus or run custom controls for the switcher sub-system. Every control panel in the system can be independently configured to meet the needs of the particular operator. Connects to the switcher through an NK-IPS over ethernet (T-BUS connection between the NK-IPS and remote control panel). On and Black these panels connect to the switcher through an NK-IPS over ethernet (T-BUS connection between the NK-IPS and remote control panel). NK RCP-NKM RCP-NKQ Option Description Adds the source button NK remote control panel. Adds the 0 source button RCP-NKM remote control panel with integrated backlit display. Adds the mnemonic button RCP-NKQ remote control panel. DashBoard Display (CBPS-DashMenu) The DashBoard Display combines a DashBoard computer with a touchscreen into a single unit that can be installed onto a standard VESA-00 mount. The DashBoard Display connects to the switcher over ethernet to provide the advanced menu system interface to the setup and operation of your or Black switcher. The DashBoard Display eliminates the need to connect another computer to your switcher network just to run DashBoard. SMC-990 Serial to MIDI Converter (SMC-990) The SMC-990 Serial to MIDI Converter is used to allow control of an Audio Mixer from a Ross Video switcher. The SMC-990 provides a single DB-9 connector for,00 baud serial RS- communication, one -pin DIN connector for MIDI in, and two -pin DIN connectors for MIDI out. Power, Serial Tx and Rx, MIDI In and MIDI Out Status LEDs next to the ports show activity status. The SMC-990 connect to the switcher via the serial port on the frame, or an external port expander such as the Comtrol DeviceMaster. SHC-9 SDI to HDMI Converter (SHC-9) The SHC-9 SDI to HDMI Converter is a high-quality signal conversion solution within the family of GearLite compact, self-contained modular products. The SHC-9 is the ideal solution for converting any SDI input signal (up to Gb/s) into an HDMI Type-A output format. User-selectable audio decoding is available with unbalanced, stereo analog audio outputs. Up to channels of embedded audio are selectable, in stereo pairs, for de-embedding and decoding. Onsite Operational Training (CARBONITE-OTR-DAY) Although Ross Video switchers are designed to be as easy as possible to install and operate, training is highly recommended to ensure that the process of taking your Ross Video switcher to air is a smooth one. Training is provided on the customer's equipment at their site. Expenses are extra, and billed at the completion of the visit. Ross Video cannot guarantee the availability of a local Trainer, as such, travel costs to all locations will be invoiced at cost. Two () days, or more, of Configuration Guide (v.) System Options

12 training is recommended for multiple MLE systems. Four () weeks advanced scheduling notice is required. Additional days of training can be added with the CARBONITE-OTR-DAY option. Please quote one additional option for each additional day of training required. Customers cancellation or rescheduling of on-site services without seven () calendar days advanced notice will incur full invoice. Online Operational Training (CARBONITE-ONL-DAY) Sometimes you don't need the hands-on attention that having a trainer come to your facility provides. In these situations Ross Video provides comprehensive, web-based, online training. Two () days, or more, of training is recommended for multiple systems. Four () weeks advanced scheduling notice is required. Additional days of training can be added with the CARBONITE-ONL-DAY option. Please quote one additional option for each additional day of training required. Customers cancellation or rescheduling of on-site services without seven () calendar days advanced notice will incur full invoice. Onsite Technical Training (CARBONITE-OTT-DAY) On-site technical training introduces the user to some of the technical aspects of switcher operation and maintenance. This includes, but is not limited to; Basic operation, Switcher installation and configurations, Peripheral interfaces, Video signal flow, System timing requirements, Circuit block diagrams, Circuit board overviews, Jumpers and indicators, Troubleshooting tips, Software upgrading, and Routine maintenance. Training is provided on the customer's equipment at their site. Expenses are extra, and billed at the completion of the visit. Ross Video cannot guarantee the availability of a local Trainer, as such, travel costs to all locations will be invoiced at cost. Two () days, or more, of training is recommended for multiple systems. Four () weeks advanced scheduling notice is required. Additional days of training can be added with the CARBONITE-OTT-DAY option. Please quote one additional option for each additional day of training required. Onsite Commissioning (CARBONITE-COM-DAY) On-site Commissioning is a great way to ensure that your switcher is properly installed into your facility and tuned to maximum performance. Once the customer has installed and cabled the equipment, a Ross Commissioning expert will come on site to get the switcher configured, verify that all peripheral interfaces are operating properly, provide a basic technical orientation, and help you get on the air. Training is provided on the customer's equipment at their site. Expenses are extra, and billed at the completion of the visit. Ross Video cannot guarantee the availability of a local Trainer, as such, travel costs to all locations will be invoiced at cost. Two () days, or more, of training is recommended for multiple MLE systems. Four () weeks advanced scheduling notice is required. Additional days of training can be added with the CARBONITE-COM-DAY option. Please quote one additional option for each additional day of training required. Customers cancellation or rescheduling of on-site services without seven () calendar days advanced notice will incur full invoice. Please note that commissioning does not replace operator or technical training. Contact your Ross representative to discuss which types of assistance are best suited to your needs. Extended Warranty This extends the standard one-year warranty on your control panel or frame by one year. Additional years can be purchased if required. The extreme comes standard with a -year transferable warranty. No extended warranty is available for this frame. Option CB-PANEL-ROSSCARE CBS-PANEL-ROSSCARE CB-PANEL-ROSSCARE CBS-PANEL-ROSSCARE Description Adds an additional year of warranty to the CB control panel. Adds an additional year of warranty to the CBS control panel. Adds an additional year of warranty to the CB control panel. Adds an additional year of warranty to the CBS control panel. System Options Configuration Guide (v.)

13 Option CBS-PANEL-ROSSCARE CBX-PANEL-ROSSCARE CF--ROSSCARE CF--ROSSCARE CBF--ROSSCARE CBF--ROSSCARE Description Adds an additional year of warranty to the CBS control panel. Adds an additional year of warranty to the CBX control panel. Adds an additional year of warranty to the frame. Adds an additional year of warranty to the frame. Adds an additional year of warranty to the CBF- frame. Adds an additional year of warranty to the CBF- frame with the CBF-ADD- option installed. Configuration Guide (v.) System Options

14 Specifications The information is this section is subject to change without notice. Switcher Resources Resource The number of resources specific to your switcher depends on the options installed. + MultiMedia extreme Black Environmental Characteristics All Switchers Ambient Temperature Range 0-0 C ( - 0 F) Frame Cooling Active, Front-to-Back airflow Control Panel Cooling Passive Video Input Specifications Input Specification Black D Channels per (Max/Min)* Aux Buses / 0 Equalization (using Belden 9 cable) Gb/s Gb/s Chroma Keys per (floating) 0 Mb/s ( -0 C) Custom Controls ( Banks CCs) Impedance ohms, terminating FSFCs (Max/Min)* GPI I/Os /0 /0 /0 Video Inputs, SDI SMPTE 9M/9M/M serial digital (non-looping) Keyers per Video Inputs, HDMI HDMI. n/a Matte Generators per Media-Store Channels Media-Store CACHE Memories per s (max) GB 00 Video Inputs, Analog High Speed HDMI Cable (Max 0m) Input Impedance Ohm Levels V peak-to-peak, nominal n/a n/a n/a Mini Engines MultiScreen Generators MultiViewer Boxes ** Reference Inputs (non-terminating, looping Standard Definition analog black High Definition tri-level sync MultiViewer Layouts MultiViewer Heads Video Output Specifications Pattern Generators per Output Specification Value Tallies Return Loss SDI Video Inputs GHz SDI Video Outputs Fixed Frame IP (DIP switch ) Rise and Fall Time 00ps ±0% (SD) 0ps ±0% (HD) Fixed Panel/CarboNET IP (DIP switch) Notes * The number of channels and FSFCs that are available depends on the switcher mode you are in. This table assumes that all options are installed. ** Each MultiScreen consumes Mini engines to generate the output. The number of MultiScreen outputs that are available depends on the number of Mini engines that are available. Signal Level DC Offset Overshoot HD Mode 00mV ±0% 0 Volts <0% Audio Specifications Specification Audio Depth 0-bit SMPTE-9M/M serial digital Black -bit AES in HD (0-bit in SD) Channels Stereo Pairs ( channels) Stereo Pair ( channels) Specifications Configuration Guide (v.)

15 Specification Output Embedded Black AES ( ports) File Format Multi-channel Waveform Audio File (.wav) Impedance Minimum/Maximum output voltage swing Rise and Fall Times Sample Rate Synchronization Jitter n/a n/a n/a 0 Ohms, differential./v peak-to-peak 0ns, typical khz Locked to Video Specification HD - Tri-Level Sync Value Alignment (> 00KHz) < 0.UI Timing (<0Hz) <.0UI HD - Composite Reference SD - Tri-Level Sync Performance not guaranteed with composite reference Alignment (> KHz) < 0.UI Timing (<0Hz) < 0.UI SD - Composite Reference Alignment (> KHz) < 0.UI System Timing Timing (<0Hz) < 0.UI All video inputs zero time relative to reference input, auto timing will correct for inputs out of time by up to +/- 0. line. System delay is less than line. Power Consumption Control Panel CB CBS CB CBS CBS CBX Consumption W.A V 0W.A V W.9A V W.A V W.A V 0W.A V Input Voltage 00-0V~ 0-0V~ -Hz.A Power Consumption Frame + MultiMedia extreme Black Consumption 90W.A V 0W 9.A V W 0.A V 00W A.V 0W.A V Input Voltage 00-0V~ 0-0V~ -Hz.A Configuration Guide (v.) Specifications

16 Option Summary Use the available options listed in the following tables for each control panel or frame. Frame Options + MultiMedia extreme Black Frames, Inputs CF- CF-PLUS CF-MM, Inputs CF- CF-PLUS CF-MM, Inputs CF- CF-PLUS CF-MM CF-EX-*, Inputs CF- CF-PLUS CF-MM, Inputs CBF-, Inputs, 9 Inputs CF-EX-* CF-EX-9* Frame Options - Frame Upgrade CF---UPG - Frame Upgrade CBF-ADD- Redundant Power, Frame PSU-VA-PIN CF-NK-PG PSU-V.9A-PIN Extended Warranty, Frame CF--ROSSCARE ** Extended Warranty, Frame CF--ROSSCARE ** CBF--ROSSCARE Extended Warranty, Frame ** CBF--ROSSCARE extreme Options Video Inputs ( SDI) CF-NK-IG Video Inputs Rear Connector CF-NK-IG-RC Video Inputs ( SDI) CF-NK-OG Video Inputs Rear Connector CF-NK-OG-RC Upgrade from NK-G-X Router CF-EX-STSWR-UPG Second Switcher Subsystem CF-EX-NDSWR-UPG Redundant Controller Card CF-EX-REDCTRL Switcher Options DashBoard Display SHC-9 SDI to HDMI Converter SideShot SMC-990 Serial to MIDI Converter XPression Live CBPS-DashMenu SHC-9 CPS-SideShot SMC-990 XDS0-000-CPS Training Options Online Operational Training Onsite Commissioning CARBONITE-ONL-DAY CARBONITE-COM-DAY Option Summary Configuration Guide (v.)

17 + MultiMedia extreme Black Onsite Operational Training Onsite Technical Training CARBONITE-OTR-DAY CARBONITE-OTT-DAY Notes: * The switcher subsystem only supports a maximum of inputs. ** The extreme comes standard with a -year transferable warranty. No extended warranty is available for this frame. Control Panel Options Control Panel Panel Option Code Redundant Power, Panel Extended Warranty, Panel CB -Button Row CB-PANEL PSU-VA-PIN CB-PANEL-ROSSCARE CBS -Button Row CBS-PANEL PSU-VA-PIN CBS-PANEL-ROSSCARE CB -Button Rows CB-PANEL PSU-VA-PIN CB-PANEL-ROSSCARE CBS -Button Rows CBS-PANEL PSU-VA-PIN CBS-PANEL-ROSSCARE CBS -Button Rows CBS-PANEL PSU-VA-PIN CBS-PANEL-ROSSCARE CBX -Button Rows CBX-PANEL PSU-VA-PIN CBX-PANEL-ROSSCARE Configuration Guide (v.) Option Summary

18 F F F ECT ECT ECT SHOW ALPHA SHOW ALPHA SHOW ALPHA PV PV PV F F F ECT Mini Mini ECT ECT Mini Mini Mini Mini MULTI SCN //CUSTOM CONTROL Mini Mini MULTI SCN MULTI SCN //CUSTOM CONTROL //CUSTOM CONTROL MULTI SCN //CUSTOM CONTROL STORE RECALL STORE STORE //CUSTOM CONTROL //CUSTOM CONTROL STORE RECALL STORE STORE RECALL RECALL PUSH PUSH PUSH PUSH PUSH PUSH RECALL RECALL PUSH PUSH PUSH LOCK HO NU BACK PUSH PUSH PUSH LOCK HO NU BACK CC UP NEXT (SHIFT) CC UP NEXT (SHIFT) ITION LOCK HO NU BACK CC UP NEXT (SHIFT) ECTS MORY BKGD DISS WIPE DIA STORE 9 RECALL PGM M AI DISS ITION ITION 0 ENTER BKGD DISS WIPE DIA LOCK HO NU BACK CC UP NEXT (SHIFT) ECTS MORY ITION BKGD DISS WIPE DIA STORE 9 RECALL PGM M AI DISS STORE 9 RECALL PGM M AI DISS 0 ENTER ECTS MORY 0 ENTER ITION BKGD DISS WIPE DIA USER ITION BKGD DISS WIPE DIA USER BKGD DISS WIPE DIA USER Panel Dimensions CB These dimensions are provided as a guide only. Contact Ross Video Technical Support for scale CAD drawings of the control panels and frames. Dimensions are in inches with metric dimensions shown in brackets [mm].. [9.9] 0. [.] CBS. [.] 0. [.] CB. [9.9]. [.] CBS. [.]. [.] Panel Dimensions Configuration Guide (v.)

19 F F F ECT ECT ECT F F F ECT ECT ECT SHOW ALPHA SHOW ALPHA SHOW ALPHA PV PV PV SHOW ALPHA SHOW ALPHA SHOW ALPHA PV PV PV Mini Mini Mini MULTI SCN //CUSTOM CONTROL //CUSTOM CONTROL //CUSTOM CONTROL Mini MULTI SCN //CUSTOM CONTROL Mini //CUSTOM CONTROL //CUSTOM CONTROL Mini STORE RECALL Mini Mini PUSH PUSH PUSH MULTI SCN MULTI SCN STORE RECALL USER USER USER LOCK HO NU BACK CC UP NEXT (SHIFT) PUSH PUSH PUSH ECTS MORY STORE 9 RECALL PGM M AI DISS ECTS MORY STORE 9 RECALL PGM M AI DISS 0 ENTER ECTS MORY 0 ENTER STORE 9 RECALL PGM M AI DISS 0 ENTER LOCK HO NU BACK CC UP NEXT (SHIFT) ITION ITION ITION BKGD DISS WIPE DIA USER ECTS MORY STORE 9 RECALL PGM M AI DISS STORE 9 RECALL PGM M AI DISS 0 ENTER ECTS MORY ECTS MORY 0 ENTER STORE 9 RECALL PGM M AI DISS 0 ENTER BKGD DISS WIPE DIA USER BKGD DISS WIPE DIA USER ITION ITION ITION BKGD DISS WIPE DIA USER BKGD DISS WIPE DIA USER BKGD DISS WIPE DIA USER CBS. [.]. [.] CBX.9 [90.0]. [.] Configuration Guide (v.) Panel Dimensions 9

20 VID REF T-BUS ALARM IN Frame Dimensions Dimensions are in inches with metric dimensions shown in brackets [mm]. Frame.9 [0.]. [.] Y Pb Pr Y Pb Pr Y Pb Pr Y Pb Pr HDMI HDMI HDMI HDMI PSL INPUTS LTC PS PS TALLY GPIO SERIAL OUTPUTS PV PGM OUT OUT IN REF. [.].0 [.9] extreme Frame.0 [.0] PANEL BREAKOUT PANEL BREAKOUT.9 [0.].0 [0.0] Black Frame.9 [0.]. [.] PS PS LTC TALLY GPIO AES PANEL SERIAL OUT 9 0 OUT. [.] OUT OUT IN REF. [.] 0 Frame Dimensions Configuration Guide (v.)