Tuesday, July 27, Testing and Characterization Plans
|
|
|
- Coleen Lyons
- 6 years ago
- Views:
Transcription
1 Testing and Characterization Plans
2 Laser testing lab is a high-level characterization facility systems integration-level a little too complicated for simple failure analysis of single plates What can we do, in collaboration with the ALD group, to develop lower-level quality control? 2
3 Optical backlighting IV curve (low voltage) Failure Analysis HV test/thermal imaging Phosphor/UV imaging Full B-Flange Testing Complete 3
4 Failure Analysis Optical backlighting IV curve (low voltage) HV test/thermal imaging Phosphor/UV imaging tilt MCP along bias angle in microscope illuminate from beneath and photograph look for dirt/mechanical issues Equipment already available Full B-Flange Testing Complete 4
5 Failure Analysis Optical backlighting IV curve (low voltage) HV test/thermal imaging Phosphor/UV imaging measure resistance in vacuum study linearity of IV measure thermal coefficient of resistivity verify in B-flange already available and in use Full B-Flange Testing Complete 5
6 Failure Analysis Optical backlighting IV curve (low voltage) HV test/thermal imaging Phosphor/UV imaging Full B-Flange Same chamber used for IV curve Subject single MCPs to high voltage Use IR camera to see uniformity and extent of heating under high voltage how to ALD MCPs dissipate heat? indirect way of measuring resistive uniformity Testing Complete 6
7 LAPPD Collaboration: Large Area Picosecond Photodetectors Thermal Imaging 05/25/10 LAPPD Collaboration Meeting 7
8 Optical backlighting IV curve (low voltage) Failure Analysis HV test/thermal imaging Phosphor/UV imaging Full B-Flange Study the amplification of single plates Image uniformity Testing Complete 8
9 Optical backlighting Failure Analysis IV curve (low voltage) HV test/thermal imaging Phosphor/UV imaging Full B-Flange Systems testing Stripline anode Timing response/ amplification dependence on plate properties Dependence on voltage gaps Testing Complete 9
10 Oreo Testing Oreo cookies can be fit into the B-flange with two ceramic plates Can be ready by beginning of September. Working with Jeff/Qing/ Anil on readiness of samples and testing sechedule We have a few questions: who s drilling, when? what about dust? masking during electroding? 10
11 Laser Lab Schedule Water installation Pack Laser SOP/safety clearance Schedule riggers, repairs, and installation Riggers to Move Laser Curtain installation Oscillator installation Pump amplifier repair 11
12 Laser Lab Schedule Water installation (wrapping up this week) Pack Laser (starting this week) SOP/safety clearance (starting this week) Schedule riggers, repairs, and installation (starting this week) Riggers to Move Laser (next week) Curtain installation (this month) Oscillator installation (this month) Pump amplifier repair (this month) 12
13 Testing Schedule Small setback from sparking, mostly due to a bad vacuum seal (top voltages in the 5 kv ballpark) Laser lab slightly delayed. LED-based measurements this month 3 resistances on top and bottom ALD over and under electrode AAO plates 2 different pore sizes variation of gap voltages September timing measurements with laser Oreo cookies 13
Experimental Astrophysics Group, Space Sciences Laboratory, 7 Gauss Way, University of California, Berkeley, CA 94720
O.H.W. Siegmund* a, J.B. McPhate a, A.S. Tremsin a, S.R. Jelinsky a, J.V. Vallerga a, R. Hemphill a, H.J. Frisch b, J. Elam c, A. Mane c, and the LAPPD Collaboration c a Experimental Astrophysics Group,
Operating Experience and Reliability Improvements on the 5 kw CW Klystron at Jefferson Lab
Operating Experience and Reliability Improvements on the 5 kw CW Klystron at Jefferson Lab Richard Walker & Richard Nelson Jefferson Lab, Newport News VA Jefferson Lab is a $600M Department of Energy facility
Commissioning the TAMUTRAP RFQ cooler/buncher. E. Bennett, R. Burch, B. Fenker, M. Mehlman, D. Melconian, and P.D. Shidling
Commissioning the TAMUTRAP RFQ cooler/buncher E. Bennett, R. Burch, B. Fenker, M. Mehlman, D. Melconian, and P.D. Shidling In order to efficiently load ions into a Penning trap, the ion beam should be
MCP Upgrade: Transmission Line and Pore Importance
MCP Upgrade: Transmission Line and Pore Importance Tyler Natoli For the PSEC Timing Project Advisor: Henry Frisch June 3, 2009 Abstract In order to take advantage of all of the benefits of Multi-Channel
Tutorial: Trak design of an electron injector for a coupled-cavity linear accelerator
Tutorial: Trak design of an electron injector for a coupled-cavity linear accelerator Stanley Humphries, Copyright 2012 Field Precision PO Box 13595, Albuquerque, NM 87192 U.S.A. Telephone: +1-505-220-3975
INSTRUMENT CATHODE-RAY TUBE
INSTRUMENT CATHODE-RAY TUBE 14 cm diagonal rectangular flat face domed mesh post-deflection acceleration improved spot quality for character readout high precision by internal permanent magnetic correction
Tender Notification for the procurement of a Scanning Electron Microscope" at IISc (Last Date for submission of tenders: 3 rd October 2018)
Tender Notification for the procurement of a Scanning Electron Microscope" at IISc (Last Date for submission of tenders: 3 rd October 2018) Dear Sir/Madam, We are looking for a high-resolution scanning
AREAL- Phase 1. B. Grigoryan on behalf of AREAL team
AREAL- Phase 1 Progress & Status B. Grigoryan on behalf of AREAL team Contents Machine Layout Building & Infrastructure Laser System RF System Vacuum System Cooling System Control System Beam Diagnostics
KLYSTRON GUN ARCING AND MODULATOR PROTECTION
SLAC-PUB-10435 KLYSTRON GUN ARCING AND MODULATOR PROTECTION S.L. Gold Stanford Linear Accelerator Center (SLAC), Menlo Park, CA USA Abstract The demand for 500 kv and 265 amperes peak to power an X-Band
INSTRUMENT CATHODE-RAY TUBE
Instrument cathode-ray tube D14-363GY/123 INSTRUMENT CATHODE-RAY TUBE mono accelerator 14 cm diagonal rectangular flat face internal graticule low power quick heating cathode high brightness, long-life
ELECTRON OPTICS OF ST-X, ST-Y SERIES OF STREAK & FRAMING CAMERA TUBES
ELECTRON OPTICS OF ST-X, ST-Y SERIES OF STREAK & FRAMING CAMERA TUBES INTRODUCTION The basic electron optics of this range of streak tubes were designed by Ching Lai at the Lawrence Livermore National
Quality produced by means of electron beam
Quality produced by means of electron beam EB-generators by Steigerwald Strahltechnik tradition and innovation In material processings Steigerwald Strahltechnik has been well known for its production and
2x1 prototype plasma-electrode Pockels cell (PEPC) for the National Ignition Facility
Y b 2x1 prototype plasma-electrode Pockels cell (PEPC) for the National Ignition Facility M.A. Rhodes, S. Fochs, T. Alger ECEOVED This paper was prepared for submittal to the Solid-state Lasers for Application
PRODUCT DATA SHEET FEATURES
Backlights Wavelengths from 1050nm to 1650nm are now offered in the Metaphase Backlight. Short-wave infrared technology provides the necessary contrast to illuminate test objects that visible and ultraviolet
ET-5050x-BF1W Datasheet
PLCC Series ET-5050x-BF1W Datasheet Features : High luminous Intensity and high efficiency Based on GaN technology Wide viewing angle : 120 Excellent performance and visibility Suitable for all SMT assembly
High ResolutionCross Strip Anodes for Photon Counting detectors
High ResolutionCross Strip Anodes for Photon Counting detectors Oswald H.W. Siegmund, Anton S. Tremsin, Robert Abiad, J. Hull and John V. Vallerga Space Sciences Laboratory University of California Berkeley,
University of Minnesota Nano Fabrication Center Standard Operating Procedure
Equipment Name: Focused Ion Beam (FIB) Coral Name: fib Revision Number: 2 Model: FEI Quanta 200 3D Revisionist: Kevin Roberts Location: Area 3 Date: 9/17/2013 1 Description The Quanta 200 3D is a DualBeam
Combination Solder Pad for Single-chip LEDs with P-LCC-2 and P-LCC-4 Housings Application Note
Combination Solder Pad for Single-chip LEDs with P-LCC-2 and P-LCC-4 Housings Application Note Introduction For many years, surface mounted devices (SMDs) have been the standard component form used for
FEL Gun Test Stand (GTS) from construction to beam operations
FEL Gun Test Stand (GTS) from construction to beam operations Carlos Hernandez-Garcia for the FEL team CASA Beam Physics Seminar June 19 2008 The DC photocathode gun Outline The enclosure and all other
The TORCH PMT: A close packing, multi-anode, long life MCP-PMT for Cherenkov applications
The TORCH PMT: A close packing, multi-anode, long life MCP-PMT for Cherenkov applications James Milnes Tom Conneely 1 page 1 Photek MCP-PMTs Photek currently manufacture the fastest PMTs in the world in
Lecture 17 Microwave Tubes: Part I
Basic Building Blocks of Microwave Engineering Prof. Amitabha Bhattacharya Department of Electronics and Communication Engineering Indian Institute of Technology, Kharagpur Lecture 17 Microwave Tubes:
Surface Mount Multilayer Ceramic Capacitors for RF Power Applications
Surface Mount Multilayer Ceramic Capacitors for RF Power Applications FEATURES Case size 0505,, 2525, and 3838 Available Ultra-stable, high Q dielectric material Available Lead (Pb)-free terminations code
Thyratrons. High Energy Switches. Features. Description
Thyratrons Lighting Imaging Telecom High Energy Switches D A T A S H E E T Description Thyratrons are fast acting high voltage switches suitable for a variety of applications including radar, laser and
3mm Round White LED T-1. Technical Data Sheet. Part No: LL-304WC2E-W2-3TC
3mm Round White LED T-1 Technical Data Sheet Part No: LL-304WC2E-W2-3TC Spec No: UP302 Rev No:V.1 Date:Feb/16/2004 Page: 1 OF 8 Features Popular T-1 diameter package High efficiency Selected minimum intensities
Development of Multiple Beam Guns for High Power RF Sources for Accelerators and Colliders
SLAC-PUB-10704 Development of Multiple Beam Guns for High Power RF Sources for Accelerators and Colliders R. Lawrence Ives*, George Miram*, Anatoly Krasnykh @, Valentin Ivanov @, David Marsden*, Max Mizuhara*,
Analog Circuits Prof. Nagendra Krishnapura Department of Electrical Engineering Indian Institute of Technology, Madras. Module - 04 Lecture 12
Analog Circuits Prof. Nagendra Krishnapura Department of Electrical Engineering Indian Institute of Technology, Madras Module - 04 Lecture 12 So, far we have discussed common source amplifier using an
Part No: 0805-FLWC-DHB
Features: Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Mono-color type. The product itself will
RF Power Generation II
RF Power Generation II Klystrons, Magnetrons and Gyrotrons Professor R.G. Carter Engineering Department, Lancaster University, U.K. and The Cockcroft Institute of Accelerator Science and Technology Scope
SURFACE MOUNT LED LAMP FULL COLOR 1210
PACKAGE DIMENSIONS 2 1 Top View.6 (1.5) G B R.17 (2.7) 3 4.127 (3.2) COMMON ANODE Side View RESIN.198 (.5).43 (1.1) Bottom View PCB.473 (1.2) ANODE SIDE.276 (.7) Pin 4 Die 1 Pin 1 (Red) Die 2 Pin 2 (Green)
Features: Descriptions: Applications:
Features: Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Mono-color type. The product itself will
Analog Technologies. LED Bulb ATLB3W20
Figure 1. The Photo of Figure 2. The Physical Photo of FEATURES Compatible with Traditional Halogen E27/26/B22 High Luminance Low Power Consumption High Stability Aluminum Alloy Heat-sink No UV Radiation
Spec No.: R3528 Date: 28-Sep-2017
R3528RGBC-8-B Features: PLCC-4 package. White package. Optical indicator. Colorless clear window. Black face. Ideal for backlight and light pipe application. Wide viewing angle. Suitable for automatic
MCP Signal Extraction and Timing Studies. Kurtis Nishimura University of Hawaii LAPPD Collaboration Meeting June 11, 2010
MCP Signal Extraction and Timing Studies Kurtis Nishimura University of Hawaii LAPPD Collaboration Meeting June 11, 2010 Outline Studying algorithms to process pulses from MCP devices. With the goal of
Optical Cryostat - Omniplex TM
The Omniplex TM, DE204*F-FMX-19OP, is a top loading optical cryostat with the ARS manufactured DE-204 cryocooler. The ARS Omniplex TM systems features large optical access and quick sample change. The
LITE-ON TECHNOLOGY CORPORATION
Features * Lead (Pb) free product RoHS compliant. * Low power consumption. * High efficiency. * Versatile mounting on p.c. board or panel. * I.C. compatible/low current requirement. * Popular T-1 diameter.
A Brief Technical History of the Large-Area Picosecond Photodetector (LAPPD) Collaboration
Preprint typeset in JINST style - HYPER VERSION A Brief Technical History of the Large-Area Picosecond Photodetector (LAPPD) Collaboration B. W. Adams a,, K. Attenkofer a,, M. Bogdan c,k. Byrum a, A. Elagin
Photodetector Testing Facilities at Nevis Labs & Barnard College. Reshmi Mukherjee Barnard College, Columbia University
Photodetector Testing Facilities at Nevis Labs & Barnard College Reshmi Mukherjee Barnard College, Columbia University First AGIS Collaboration Meeting, UCLA, June 26-27, 2008 M64 MAPMT Testing for Double
A HIGH POWER LONG PULSE HIGH EFFICIENCY MULTI BEAM KLYSTRON
A HIGH POWER LONG PULSE HIGH EFFICIENCY MULTI BEAM KLYSTRON A.Beunas and G. Faillon Thales Electron Devices, Vélizy, France S. Choroba DESY, Hamburg, Germany Abstract THALES ELECTRON DEVICES has developed
GA A26497 SOLID-STATE HIGH-VOLTAGE CROWBAR UTILIZING SERIES-CONNECTED THYRISTORS
GA A26497 SOLID-STATE HIGH-VOLTAGE CROWBAR by J.F. Tooker, P. Huynh, and R.W. Street JUNE 2009 DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government.
Luckylight Package Pure Green Chip LED. Technical Data Sheet. Part No.: S150PGC-G5-1B
126 Package Pure Green Chip LED Technical Data Sheet Part No.: S15PGC-G5-1B Spec No.: S15 Rev No.: V.3 Date: Jul./1/26 Page: 1 OF 9 Features: Package in 8mm tape on 7 diameter reel. Compatible with automatic
Physics Requirements for the CXI Ion Time-of-Flight
PHYSICS REQUIREMENT DOCUMENT (PRD) Doc. No. SP-391-000-30 R0 LUSI SUB-SYSTEM CXI Physics Requirements for the CXI Ion Time-of-Flight Sébastien Boutet CXI Scientist, Author Paul Montanez CXI Lead Engineer
Applications Keypad Backlighting Symbol Backlighting Status Indication Front Panel Indicator
Reverse Surface Mount Flip Chip LEDs Technical Data HSMS-H630/H730 HSMD-H630/H730 HSMY-H630/H730 HSMG-H630/H730 Features Reverse Mountable Surface Mount LED Breakthrough Reliability through Elimination
Features. Applications
ASMB-BTE1-0B332 High Brightness PLCC4 Tricolor LED Data Sheet Description This family of SMT LEDs packaged in the form of PLCC-4 with common Anode pin. The full black plastic housing with white inner reflector
Luckylight Package Warm White Chip LED. Technical Data Sheet. Part No.: S150W-W6-1E
126 Package Warm White Chip LED Technical Data Sheet Part No.: S15W-W6-1E Spec No.: S15 Rev No.: V.3 Date: Jul./1/26 Page: 1 OF 11 Features: Package in 8mm tape on 7 diameter reel. Compatible with automatic
Data Sheet. HSMD-Cxxx, HSMG-Cxxx, HSMH-Cxxx, HSMS-Cxxx, HSMY-Cxxx, Surface Mount Chip LEDs
HSMD-Cxxx, HSMG-Cxxx, HSMH-Cxxx, HSMS-Cxxx, HSMY-Cxxx, Surface Mount Chip LEDs Data Sheet HSMx-C11/ HSMx-C12/HSMx-C15/HSMx-C17/HSMx-C177/ HSMx-C19/HSMx-C191/HSMx-C197/HSMx-C265 Description These chip LEDs
Projectors EFFORTS FOR PROJECTOR QUALITY
Projectors EFFORTS FOR PROJECTOR QUALITY Projectors require a strong power of expression to build effective communication in business. We envision all circumstances from a wide range of installation methods
Luckylight. 1.10mm Height 0805 Package. Warm White Chip LED. Technical Data Sheet. Part No.: S170W-W6-1E
1.1mm Height 85 Package Warm White Chip LED Technical Data Sheet Part No.: S17W-W6-1E Spec No.: S17 Rev No.: V.3 Date: Jul./1/26 Page: 1 OF 11 Features: Luckylight Package in 8mm tape on 7 diameter reel.
Design and Simulation of High Power RF Modulated Triode Electron Gun. A. Poursaleh
Design and Simulation of High Power RF Modulated Triode Electron Gun A. Poursaleh National Academy of Sciences of Armenia, Institute of Radio Physics & Electronics, Yerevan, Armenia poursaleh83@yahoo.com
Data Sheet. ASMT-UWB1-NX302 OneWhite Surface Mount PLCC-2 LED Indicator. Description. Features. Applications
ASMT-UWB1-NX32 OneWhite Surface Mount PLCC-2 LED Indicator Data Sheet Description This family of SMT LEDs is packaged in the industry standard PLCC-2 package. These SMT LEDs have high reliability performance
Measurement of Microdisplays at NPL
Conference on Microdisplays Measurement of Microdisplays at NPL Christine Wall, Dr Julie Taylor, Colin Campbell 14 th Sept 2001 Overview Displays measurement at NPL Why measure microdisplays? Measurement
YJ-VTC-5730-G02 High CRI LED
PRODUCT: 5730 SURFACE MOUNT LED VTC FEATURES: 5.7 mm 3.0 mm 0.8 mm surface-mount LED 120 emission angle 95 min Ra DESCRIPTION Yuji LED s VTC 5730 SMD provides true full spectrum coverage and ultra high
Design, Fabrication and Testing of Gun-Collector Test Module for 6 MW Peak, 24 kw Average Power, S-Band Klystron
Available online www.ejaet.com European Journal of Advances in Engineering and Technology, 2014, 1(1): 11-15 Research Article ISSN: 2394-658X Design, Fabrication and Testing of Gun-Collector Test Module
1.10mm Height 1210 Package. Bi-Color (Multi-Color) Chip LED. Technical Data Sheet. Part No: S155VBC-V12B-B41B
.mm Height 2 Package Bi-Color (Multi-Color) Chip LED Technical Data Sheet Part No: S55VBC-V2B-B4B Spec No.: S55 Rev No.: V.3 Date: Jul.//25 Page: OF Features: Package in 8mm tape on 7 diameter reel. Bi-color
Technical Data Sheet 0603 Package Chip LED (0.4mm Height)
Technical Data Sheet 0603 Package Chip LED (0.4mm Height) Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow
Agilent HSMx-C265 Surface Mount Chip LEDs Data Sheet
Agilent HSMx-C265 Surface Mount Chip LEDs Data Sheet Description The HSMx-C265 is a reverse mountable chip-type LED for lighting the non-component side of a PCB board. In this reverse mounting configuration,
THE CARE AND FEEDING OF CROWBAR THYRATRONS
THE CARE AND FEEDING OF CROWBAR THYRATRONS Application Notes Load faults can result in damaging internal arcs in high power RF Broadcast Transmitter Amplifier devices, such as Inductive Output Tubes (IOT),
Data Sheet. HSMD-Cxxx, HSMG-Cxxx, HSMH-Cxxx, HSMS-Cxxx, HSMY-Cxxx, Surface Mount Chip LEDs. HSMx-C110/C120/C150/C170/ C177/C190/C191/C197/C265
HSMD-Cxxx, HSMG-Cxxx, HSMH-Cxxx, HSMS-Cxxx, HSMY-Cxxx, Surface Mount Chip LEDs Data Sheet HSMx-C11/C12/C15/C17/ C177/C19/C191/C197/C265 Description These chip LEDs are designed in an industry standard
Jefferson Lab Experience with Beam Halo, Beam Loss, etc.
Jefferson Lab Experience with Beam Halo, Beam Loss, etc. Pavel Evtushenko with a lot of input from many experienced colleagues Steve Benson, Dave Douglas, Kevin Jordan, Carlos Hernandez-Garcia, Dan Sexton,
Lifetime of MCP-PMTs
Lifetime of MCP-PMTs, Merlin Böhm, Alexander Britting, Wolfgang Eyrich, Markus Pfaffinger, Fred Uhlig (Universität Erlangen-Nürnberg) Motivation Approaches to increase lifetime Results of aging tests Outlook
Brief Description of Circuit Functions. The brief ckt. description of V20 107E5 17 Monitor
Exhibit 4 Brief Description of Circuit Functions The brief ckt. description of V20 107E5 17 Monitor 0. Functional Block Diagram 1. General Description 2. Description of Circuit Diagram A. Power Supply
Luckylight. 0.56" Quadruple Digit Numeric Displays. Technical Data Sheet. Model No.: KW4-56NXWB-P-Y
.56" Quadruple Digit Numeric Displays Technical Data Sheet Model No.: KW4-56NXWB-P-Y Spec No.:W5643E/F Rev No.: V.2 Date: Oct/23/28 Page: 1 OF 6 Features:.56 (inch) digit height. Excellent segment uniformity.
Physics of high-current diode
Physics of high-current diode Lie Liu National University of Defense Technology Changsha, Hunan 410073, China Content 1 Electron emission mechanisms and fabrication of cathode 2 Plasma formation and diagnostics
High-power klystrons. The benchmark in scientific research. State-of-the-art RF sources for your accelerator
> High- klystrons The benchmark in scientific research State-of-the-art RF sources for your accelerator Thales has been one of the leading manufacturers of RF and microwave sources for decades, and is
The SLAC Polarized Electron Source *
SLAC-PUB-9509 October 2002 The SLAC Polarized Electron Source * J. E. Clendenin, A. Brachmann, T. Galetto, D.-A. Luh, T. Maruyama, J. Sodja, and J. L. Turner Stanford Linear Accelerator Center, 2575 Sand
i-pcgrid Workshop 2018
i-pcgrid Workshop 2018 Power Line Carrier Holes and Field Trial Tests Presented by: Tony Bell PLC Product Manager AMETEK Power Instruments Pulsar Products www.ametekpower.com 1 DEFINITION of Carrier Holes
A quick and dirty magnet design for the magnetized beam LDRD proposal Jay Benesch 10/16/2015
A quick and dirty magnet design for the magnetized beam LDRD proposal Jay Benesch 10/16/2015 Abstract I describe a realizable Helmholtz pair design which provides 500 ppm Bz uniformity over a 1 cm cylinder
Through Hole Lamp Product Data Sheet LTW-2S3D7 Spec No.: DS Effective Date: 10/06/2012 LITE-ON DCC RELEASE
Through Hole Lamp Product Data Sheet LTW-2S3D7 Spec No.: DS20-2005-014 Effective Date: 10/06/2012 Revision: C LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien
This work was supported by FINEP (Research and Projects Financing) under contract
MODELING OF A GRIDDED ELECTRON GUN FOR TRAVELING WAVE TUBES C. C. Xavier and C. C. Motta Nuclear & Energetic Research Institute, São Paulo, SP, Brazil University of São Paulo, São Paulo, SP, Brazil Abstract
WAH WANG HOLDINGS (HONG KONG) CO., LTD.
Wah Wang Data Sheet For 5mm Super Flux White LED High Reliable Type High Power 3 LED Chips Series RF-M05V53WUR4-B4-Q Address : Unit C, D & E, 12/F., Po Shau Centre, No. 115 How Ming Street Kwun Tong, Kowloon,
Filament Series Flexible Filament
Filament Series Filament Series Flexible Filament Datasheet Decorative Light Decorative lighting Hotel Lighting Bulb Commercial Lighting Introduction : Edison Flexible Filament use flip chip packaging
Features. Applications. Part Number Color Package Description
HSMF-C113 and HSMF-C115 Right Angle Tricolor Surface Mount ChipLEDs Data Sheet Description The HSMF-C113 / C115 tricolor chip-type LED is designed in an ultra small package for miniaturization. It is the
S195AVGC-2BM 1.6x0.8mm, Red & Yellow Green LED Surface Mount Bi-Color Chip LED Indicator
Features: Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Bi-color type. Color: Red & Yellow Green.
Reducing tilt errors in moiré linear encoders using phase-modulated grating
REVIEW OF SCIENTIFIC INSTRUMENTS VOLUME 71, NUMBER 6 JUNE 2000 Reducing tilt errors in moiré linear encoders using phase-modulated grating Ju-Ho Song Multimedia Division, LG Electronics, #379, Kasoo-dong,
PEP-II Overview & Ramp Down Plan. J. Seeman DOE PEP-II Ramp Down-D&D Review August 6-7, 2007
PEP-II Overview & Ramp Down Plan J. Seeman DOE PEP-II Ramp Down-D&D Review August 6-7, 2007 Topics Overview of the PEP-II Collider PEP-II turns off September 30, 2008. General list of components and buildings
SMD LED Product Data Sheet LTW-006DCG-5 Spec No.: DS Effective Date: 11/30/2010 LITE-ON DCC RELEASE
SMD LED Product Data Sheet LTW-006DCG-5 Spec No.: DS22-2010-0293 Effective Date: 11/30/2010 Revision: - LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road,
Through Hole Lamp Product Data Sheet LTW-42NDP4-HF Spec No.: DS Effective Date: 08/23/2011 LITE-ON DCC RELEASE
Through Hole Lamp Product Data Sheet LTW-42NDP4-HF Spec No.: DS20-2011-0111 Effective Date: 08/23/2011 Revision: A LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien
Image Intensifier User Guide
Image Intensifier User Guide This User Manual is intended to provide guidelines for the safe operation of Photek MCP Intensifiers. (Please take particular note of pages 3 and 4). If you require any further
Operation of CEBAF photoguns at average beam current > 1 ma
Operation of CEBAF photoguns at average beam current > 1 ma M. Poelker, J. Grames, P. Adderley, J. Brittian, J. Clark, J. Hansknecht, M. Stutzman Can we improve charge lifetime by merely increasing the
DESIGN AND OPTIMIZATION OF LARGE-AREA OLEDS
DESIGN AND OPTIMIZATION OF LARGE-AREA OLEDS BY ELECTRO-THERMAL MODELING S. Altazin 1, R. Hiestand 1, C. Kirsch 2, M. Diethelm 1,2, L. Penninck 1, M. A. Maindin 1, M. Fontenlos 1, B. Ruhstaller 1,2* beat.ruhstaller@zhaw.ch
LED Display Product Data Sheet LTS-2306CKD-P Spec No.: DS Effective Date: 07/20/2013 LITE-ON DCC RELEASE
LED Display Product Data Sheet LTS-2306CKD-P Spec No.: DS30-2013-0036 Effective Date: 07/20/2013 Revision: - LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1
Features. Applications
HSMF-C118 TriColor ChipLED Data Sheet Description The HSMF-C118 tricolor chip-type LED is designed in an ultra small package for miniaturization. It is the first of its kind to achieve such small packaging
CX1725W Liquid Cooled, Hollow Anode Two-Gap Metal/Ceramic Thyratron
CX1725W Liquid Cooled, Hollow Anode Two-Gap Metal/Ceramic Thyratron The data to be read in conjunction with the Hydrogen Thyratron Preamble. ABRIDGED DATA Hollow anode, deuterium-filled two-gap thyratrons
Agilent HSMx-C660 Right Angle Surface Mount Chip LEDs Data Sheet
Agilent HSMx-C66 Right Angle Surface Mount Chip LEDs Data Sheet Features Right Angle Mounting Compatible with IR Reflow Soldering Process Available in a Wide Variety of Colors Available in 8 mm Tape on
VM GATE VALVE GRINDING & LAPPING MACHINE
VM1150-1200 GATE VALVE GRINDING & LAPPING MACHINE 2014 04 VM1150-1200 Lightweight for easy handling and installation. Powerful Wide working range: nominal diameter of 1.5-48 inches (40-1200 mm). Submersion
SURFACE MOUNT LED LAMP 0603 (0.8 mm Height)
PACKAGE DIMENSIONS 0.071 (1.8) 0.055 (1.4) 0.035 (0.9) 0.028 (0.7) TOP 0.047 (1.2) 0.031 (0.8) 0.012 (0.3) SIDE 0.039 (1.0) CATHODE MARK BOTTOM + - POLARITY NOTE: Dimensions for all drawings are in inches
HE Series. EdiPower III. Datasheet
EdiPower III EdiPower III Series HE Series Datasheet Down Light High Bay Spot Light PAR Lamp Bulb Street Light Introduction : Edison COB is a high uniformity array component which delivers high lumen output
Through Hole Lamp Product Data Sheet LTW-1KHDS5Z Spec No.: DS Effective Date: 10/19/2012 LITE-ON DCC RELEASE
Through Hole Lamp Product Data Sheet LTW-1KHDS5Z Spec No.: DS20-2012-0148 Effective Date: 10/19/2012 Revision: - LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien
SURFACE MOUNT LED LAMP STANDARD BRIGHT 0606
PACKAGE DIMENSIONS 0.075 (1.9) 0.063 (1.6) 0.035 (0.9) TOP 0.047 (1.2) 0.012 (0.3) 0.032 [0.8] SIDE 0.043 [1.1] 1 3 0.020 [0.5] 2 4 BOTTOM CATHODE MASK 1 2 3 4 HER / AlGaAs Red / Yellow (for-34) Green
ASMT SxB5 Nxxxx Surface Mount LED Indicator
ASMT SxB5 Nxxxx Surface Mount LED Indicator Description Avago Power PLCC 4 is an extension of our PLCC 2 SMT LEDs. The package can be driven at higher current due to its superior package design. The product
Yet Another KW Amplifier for 432
Yet Another KW Amplifier for 432 Luis Cupido, CT1DMK Abstract: The Russian VHF triode GS35b is specified to operate up to 1000MHz with 1.5KW anode dissipation. Although the tube geometry makes the construction
VM GATE VALVE GRINDING & LAPPING MACHINE
VM1350-1600 GATE VALVE GRINDING & LAPPING MACHINE 2014 04 VM1350-1600 Powerful, rigid design with easy set up and handling. Powerful Wide working range: nominal diameter of 1.5-48 inches (40-1200 mm).
Surface Mount Multilayer Ceramic Capacitors for RF Power Applications
Surface Mount Multilayer Ceramic Capacitors for RF Power Applications FEATURES Case size 0505 and and 2525 Available Ultra-stable, high Q dielectric material Available Lead (Pb)-free terminations code
CHAPTER 9. Actives Devices: Diodes, Transistors,Tubes
CHAPTER 9 Actives Devices: Diodes, Transistors,Tubes 1 The electrodes of a semiconductor diode are known as anode and cathode. In a semiconductor diode, electrons flow from cathode to anode. In order for
AMBIENT LIGHT SENSOR IC
Features Close to the human eye s response Infrared light wavelength cut off:430-640nm Good output linearity across wide illumination range Low sensitivity variation across various light sources Guaranteed
HIGH VOLTAGE SWITCH PERFORMANCE OF THE EIMAC X-2159 TETRODE ABSTRACT
HIGH VOLTAGE SWITCH PERFORMANCE OF THE EIMAC X-2159 TETRODE by Bobby R. Gray High Power Component & Effects Section Techniques Branch Surveillance Division Rome Air Development Center Griffiss Air Force
Large Area, High Speed Photo-detectors Readout
Large Area, High Speed Photo-detectors Readout Jean-Francois Genat + On behalf and with the help of Herve Grabas +, Samuel Meehan +, Eric Oberla +, Fukun Tang +, Gary Varner ++, and Henry Frisch + + University
Data Sheet. ASMT-UWB1-NX302 OneWhite Surface Mount PLCC-2 LED Indicator. Description. Features. Applications
ASMT-UWB1-NX302 OneWhite Surface Mount PLCC-2 LED Indicator Data Sheet Description This family of SMT LEDs is packaged in the industry standard PLCC-2 package. These SMT LEDs have high reliability performance
Reproduce Amplifier Revision-D
Reproduce Amplifier Revision-D AMPEX UPGRADE ELECTRONICS Owners Manual RTZ Professional Audio 4260 Pine Vista Blvd Alpharetta, GA 30022 USA Web: http://www.rtzaudio.com Email: rtzaudio@mindspring.com COPYRIGHT
YJ-VTC-2835-G01 High CRI LED
PRODUCT: 2835 SURFACE MOUNT LED VTC FEATURES: 2.8 mm 3.5 mm 0.7 mm surface-mount LED 120 emission angle 95 min Ra DESCRIPTION Yuji LED s VTC 2835 SMD provides true full spectrum coverage and ultra high
Photo IC diode. COB (chip on board) type, small package. S CT. Absolute maximum ratings
COB (chip on board) type, small package mm The photo IC has spectral response close to human eye sensitivity. Two photosensitive areas are made on a single chip. Almost only the visible range can be measured