Le module STB 420 offre les possibilités suivantes :
|
|
- Teresa Walton
- 6 years ago
- Views:
Transcription
1 électronique SAFETY MODULE STB 420 FEATURES Checking of 4 power supplies isolated from each other Contrôle de 4 alimentations isolées entre elles Threshold detection for 5V power supply (4.5V) Détection de seuil pour alimentation 5V (4,5V) 4 safety loops for alarms 4 boucles de sécurité pour alarmes Programmable watchdog Levels adjustable from 6V to 220V on power supply check Niveaux ajustables du 6V au 220V sur contrôle alimentation 3 potential-free relay outputs 3 sorties relais libres de potentiel "Fault" display leds Leds de visualisation "défauts" Fitting on DIN RAIL DESCRIPTI The STB 420 module provides the following possibilities : - Checking of 4 DC or AC power supplies isolated from each other ; - Lower limits of the 5V logic for microcomputers (threshold at 4.5V) ; - Checking of 4 safety loops for temperature, ventilation, pressure detection, etc... - Watchdog programmable by switch from a few microseconds to 36 minutes ; - The outputs are potential-free. Le module STB 420 offre les possibilités suivantes : - Contrôle de 4 alimentations, en continu ou alternatif, isolées entre elles ; - Limites inférieures du 5V logique pour les microordinateurs (seuil à 4,5V) ; - Contrôle de 4 boucles de sécurité pour détection de température, ventilation, pression, etc. - Chien de garde programmable par switch de quelques micro-secondes à 36 minutes ; - Les sorties sont libres de potentiel. Small dimensions and easy to integrate into systems or bays (fitting on DIN RAIL), the STB 420 module is an easy-to-use centralized control unit. THE INTERNATIAL CERTIFICATI NETWORK De petites dimensions et facilement intégrable dans les systèmes ou les baies (montage sur RAIL DIN), le STB 420 est une unité de contrôle centralisée simple d emploi. 9, rue Georges Besse FTENAY LE FLEURY - FRANCE - tél:(33) fax:(33) AFAQ ISO 9001 N 1998 / 8803
2 STB 420 SPECIFICATIS TYPE ISOLATED INPUTS - Number of channels - Type - Level - Isolation MODULE POWER SUPPLY - Number - Level (t = 25 C) SAFETY TERMINAL BLOCK 4 AC or DC Adjustable by channel from 6V to 220V AC Injection resistances on studs HCPL 3700 type photocoupler 1 5V to 24 VDC 5V POWER SUPPLY LEVEL CHECK - Type Adjustable threshold detector (module supplied in 5V supply and 4.5V detection mode) SAFETY LOOP - Number of channels - Fault WATCHDOG - Programming - Range - Level RELAYS - Breaking capacity - Max current - Max voltage PRESENTATI - Dimensions in mm (L x W x H) - Fitting ENVIRMENT - Operating temperature - Storage temperature - Relative humidity 4 By loop opening or threshold By switches From 10µs to 36 minutes TTL reset active in low state TTL watchdog active in low state 30VA 2A 220VAC 115 x 115 x 40 On DIN RAIL 0 C to + 60 C - 10 C to + 70 C 90 % (without condensation) HOW TO ORDER? STB /28
3 ADAS --- Electronique --- DOCUMENT REVISI SHEET PRODUCT REFERENCE : STB 420 DATE NATURE OF MODIFICATI AUTHOR MARCH 89 MARCH 93 Update of STB 420 documentation Upgrade to Revision B - Edition 2 Documentation update Upgrade to Revision C - Edition 3 Ph. D 1
4 STB 420 C O N T E N T S A. OPERATI...3 A.1. CHECKING ISOLATED POWER SUPPLIES...3 A.2. SAFETY LOOPS...5 A.3. NOMINAL POWER SUPPLY VALUE FAULT DETECTI...5 A.4. SAFETY FAULT OUTPUT...6 A.5. WATCHDOG...6 B. EQUIPMENT LAYOUT...8 2
5 A. OPERATI A.1. CHECKING ISOLATED POWER SUPPLIES The STB 420 checks the presence of 4 power supplies isolated from each other and from the terminal block. The switch SW1 validates or not the presence of the power supply involved. E.g. : If there are two power supplies to be checked AL1 and AL2 SW AL2 AL1 The resistances R1, R3, R5 and R7 have to be adjusted according to the power supply tested. The STB 420 can receive DC or AC signals. The current injection resistances are mounted on studs for ease of channel customization. The STB 420 makes use of the characteristics of the MID 400 products for version A and HCPL 3700 for the other versions. 3
6 The input structure is as follows : RS RP MID 400 RS RP CF HCPL 3700 The table below describes the values chosen for the versions available : VERSI A B C D E F NORMAL VIN (V) RS (KΩ) 2K CF (µf) NC Photocouplers MID 400 HCPL 3700 The red led D5 indicates whether there is a power supply fault on the operational channels. The "ISO Supply Fault" relay is then deactivated which corresponds to a fault. It can be noted that when the STB 420 terminal block is not supplied the "ISO Supply Fault" appears. 4
7 A.2. SAFETY LOOPS The STB 420 terminal block has detection of four safety loops : SECUR1 to SECUR4. The threshold is set by IC 16 (LM 335). If the inputs exceed this threshold, an alarm will occur. E.g. : Ventilation failure. The LM 335 on the fan overheats, the threshold is exceeded, the alarm is triggered. N.B. : For the unused loops ; short-circuit the corresponding inputs. ST3 enables the two groups of two inputs to be "ORed". ST4 enables the watchdog fault relay excitation to be chosen : AB = watchdog BC = safety fault A.3. NOMINAL POWER SUPPLY VALUE FAULT DETECTI The STB 420 module has a level detector performed by the ICL 8211 chip. The resistances R27, R28 and R29 set the triggering threshold. The straps on ST1 enable configuration according to the application. Example 1 : The terminal block is supplied by the 5V of a system and you want to check this : ST1 - fit BC and EF. Example 2 : The terminal block is supplied with + 12V by and you want to check the 5V of a system : ST1 - fit AB - Power supply in + 12V by VAlim - Check the 5V by VControle The STB 420 module is supplied with a 4.5V detection. 5
8 A.4. SAFETY FAULT OUTPUT The "safety fault" output can be triggered by one of the following three faults : = A malfunction on one of the four safety loops. = Detection of voltage lower than the threshold required on ICL = Checking the presence of the four isolated power supplies. The red led D6 displays the "ε fault" and the "ε safety faults" relay is then deactivated. A.5. WATCHDOG The STB 420 watchdog operates as follows : = On power up, the circuit is set to the "FAULT" state. The red led is lit (D9). = The first pulse from the system boots the watchdog and lets the oscillator go to 1MHz. = At this moment, the led goes out, the watchdog is booted. The pulses then have to occur with a frequency greater than that displayed on the SW2 switches. = If an anomaly occurs, the watchdog trips. Only a repower-up or a pulse on the watchdog INIT input reboots the system. = Watchdog time : The base oscillator of the STB 420 is at 1 MHz. The triggering time is determined by the "SW2" SWITCH assembly. The combination on SW2 sets the time. 6
9 COMMENTS : = The signals on "watchdog" and watchdog "INIT" are active at low state. = They are TTL compatible. = The minimum width must be 100 ns and it is the leading edge which is taken into account. The table below illustrates the possible time lags : SW WD TIME 8 µs 32 µs 128 µs 512 µs 2,048 µs 8,19 ms 32,77 ms 131 ms 512 ms 2,1 s 8,39 s 33,5 s 2mn 14 s 8mn 56 s 36mn 26 s 7
10 B. EQUIPMENT LAYOUT 8
11
32 RELAY OUTPUTS TERMINAL BLOCK SPECIFICATIONS* Versions RB SB SH Contact 1RT 1T 1T
STB 520 32 RELAY OUTPUTS TERMINAL BLOCK STB 520 terminal block provides 32 digital outputs such as relays in a very small unit. It was designed to meet industrial requirements. The availability of optocoupler-ctrolled
More informationCONDITIONER TERMINAL BLOCK 8 ISOLATED ANALOG INPUTS STB 582
CONDITIONER TERMINAL BLOCK 8 ISOLATED ANALOG INPUTS STB 582 Eight 3-port isolated analog inputs INPUTS / OUTPUTS / POWER SUPPLY Protected inputs Levels from ± 50mV FS to ± 40V FS Low-pass 2 nd order filter
More information02/11/2015
DIN Rail Mount 17.5 mm MUS/MUSF 80 AC/DC Part number 84872141 Control relays monitoring their own power supply - MUS : Over/undervoltage control Selectable latching (memory) function - MUSF : Over/undervoltage
More informationHigh performance circuit breakers
Series High performance Description The high performance MCB offers a compact solution to circuit protection. The devices are DIN rail mounted. The is available with application-specific trip characteristics
More informationAssembly. Front view. LEDs. Parametrization interface. Power Bus
otation Speed Monitor Features Assembly 1-channel signal conditioner 2 V DC supply Input for 2- or -wire sensors Input frequency 10 mhz... 50 khz elay contact output Start-up override and restart inhibit
More informationKuhnke Technical Data. Contact Details
Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have
More informationData Pattern Generator
Data Pattern Generator DG2040 * DG2030 * DG2020A * P3410/P3420 Characteristics DG2040. Features Specs Ordering Information Pricing Information Print Data Sheet (61kB) Request a Quote Output Data Data Rate
More informationMultifunction Digital Timer
Multifunction Digital Timer 72 x72 mm Timer with Easy-to-use Functions Nine output modes accommodate a wide variety of applications. All parameters set by scroll-through menus accessed from the front panel.
More informationFOM-9010, FOM-9011 and FOM-9012
Control and Alarm Voltage sense, open collector, or contact inputs Features: FOM-00: Voltage Sense, Open Collector, or Dry Contact Inputs. State Detection for TIA-, TIA-, and TTL Signals. FOM-0: SPDT Form
More informationPRINCIPLES AND APPLICATIONS
GENERATION & NETWORK Digital Automation Measuring and Control Devices AMS7000 PROCOM The optimum operation of an electrical network depends particularly on the reliability and the availability of the protection,
More informationCAMTO LTD. Arc detecting system DC/AC
CAMTO LTD Arc detecting system DC/AC Arc detecting system DC/AC The system is based on experience with arc protection since 1962. The system units are built into boxes that all fit on a 35 mm DIN-rail.
More informationDCP100 Digital Control Programmer Specifications
DCP100 Digital Control Programmer Specifications EN01-6028 October 1996 Overview The DCP100 is a microprocessor based 1 /4 DIN programmer/controller for process variable versus time control of temperature,
More informationCapacitance Limit Detection nivotester FTC 420/421/422
Technical Information TI 127F/00/en Capacitance Limit Detection nivotester FTC 420/421/422 Limit switches in Minipac design for liquids and bulk solids Application Nivotester FTC 420...422 capacitive limit
More informationE6CP-A. An Absolute Encoder at About the Same Price as an Incremental Encoder. Ideal for robot limit signals. Low-cost Encoder with Diameter of 50 mm
Low-cost Encoder with Diameter of 50 mm CSM DS_E An Absolute Encoder at About the Same Price as an Incremental Encoder. Ideal for robot limit signals. High-precision detection of automatic machine timing.
More information14 GHz, 2.2 kw KLYSTRON GENERATOR GKP 22KP 14GHz WR62 3x400V
14 GHz, 2.2 kw KLYSTRON GENERATOR GKP 22KP 14GHz WR62 3x400V With its characteristics of power stability independent of the load, very fast response time when pulsed (via external modulated signal), low
More informationDirect PWM. 1000/2000 Series POWERBLOK MODULE
Direct PWM 1000/2000 Series POWERBLOK MODULE Features A universal servo-drive integrated on a Power Hybrid Module. Designed for direct PWM Servo Control Designed for use with Deta Tau's PMAC controllers
More informationHS-509 VIBRATION TRIP MODULE
HS-509 VIBRATION TRIP MODULE 1. Overview The HS-509 is a configurable trip amplifier capable of accepting a 4-20mA signal from a HS-420 sensor and providing two trip action relay outputs along with an
More informationGamma instabus. Technical product information
Gamma instabus Technical product information Universal dimmer N 554D31, 4 x 300 VA / 1x 1000 VA, AC 230 V Universal dimmer N 554D31 Control of dimmable lamps, including LED without minimum load Output
More informationB. The specified product shall be manufactured by a firm whose quality system is in compliance with the I.S./ISO 9001/EN 29001, QUALITY SYSTEM.
VideoJet 8000 8-Channel, MPEG-2 Encoder ARCHITECTURAL AND ENGINEERING SPECIFICATION Section 282313 Closed Circuit Video Surveillance Systems PART 2 PRODUCTS 2.01 MANUFACTURER A. Bosch Security Systems
More informationFibre Optic Modem ODW-611
Fibre Optic Modem ODW-611 PROFIBUS DP to fibre optic link, point-to-point applications The ODW-611 is a fibre optic modem designed for point-to-point fibre optic connections between PROFI- BUS DP networks.
More informationMagnecraft Power Relays
Description DPST-NO, 30 A; DPDT, 30 A (NO) / 3 A (NC) Description The series power relays offer a small package size and features Class F insulation for a maximum coil temperature of 55 C (3 F). These
More informationRack mounted telephone- and leased line modem for industrial applications
Rack mounted telephone- and leased line modem for industrial applications TR-6 Rack modem for industrial PSTNand /-wire leased line applications The TR-6 is an analogue V. 9 -rack PSTN modem as well as
More informationSequential and Combination Timer TK-415 with RS-232 communication
NOVATEK-ELECTRO LTD. Sequential and Combination Timer TK-415 with RS-232 communication OPERATION MANUAL WWW.NOVATEK-ELECTRO.COM/EN 2011 1. GENERAL PROVISIONS 1.1. BASIC FUNCTIONS - microprocessor controlled.
More informationRST RST WATCHDOG TIMER N.C.
19-3899; Rev 1; 11/05 Microprocessor Monitor General Description The microprocessor (µp) supervisory circuit provides µp housekeeping and power-supply supervision functions while consuming only 1/10th
More informationNational Park Service Photo. Utah 400 Series 1. Digital Routing Switcher.
National Park Service Photo Utah 400 Series 1 Digital Routing Switcher Utah Scientific has been involved in the design and manufacture of routing switchers for audio and video signals for over thirty years.
More informationAK-PVE4 Operating Instructions. Measuring of norm signals in wall-type units. Performance:
AK-PVE4 Operating Instructions Measuring of norm signals in wall-type units 1 2 P Performance: Digit heights: 20 mm Colour: red Display range: -999 9999 Wall-type housing: light grey made of ABS-plastic
More informationMAXTECH, Inc. BRC-1000 Series. C-Band Redundant LNB Systems. Technology for Communications. System Block Diagrams
MAXTECH, Inc. Technology for Communications BRC-1000 Series C-Band Redundant LNB Systems Introduction Redundant LNB systems minimize system downtime due to LNB failure by providing a spare LNB and an automatic
More informationDigital output modules
Appendix 374 Digital output modules Order number Figure Type DO 8xDC 24V 2A DO 16xDC 24V 1A DO 16xDC 24V 2A DO 16xDC 24V 0.5A manual operation General information Note - - - - Features 8 outputs, in groups
More informationF90 Series (Rate Indicators / Controllers) INSTRUCTION MANUAL
F90 Series (Rate Indicators / Controllers) INSTRUCTI MANUAL FEATURES DIN 48 9mm DIN 48 9mm Standard Panel Size Monitor & Preset Type 1 Monitor type with the large display 2 Preset Type can make the upper/lower
More informationStandard RS232 RS ma
1 / 5 CONTROL AND VISUALIZATION OF AC CURRENT IN SINGLE PHASE LINES BY EXTERNAL SHUNT Function Operating mode Current control Frequency control DC component control Shunt Timer Resolution Current precision
More information18 GHz, 2.2 kw KLYSTRON GENERATOR GKP 24KP 18GHz WR62 3x400V
18 GHz, 2.2 kw KLYSTRON GENERATOR GKP 24KP 18GHz WR62 3x400V With its characteristics of power stability whatever the load, very fast response time when pulsed (via external modulated signal), low ripple,
More informationORDERING Page 6 BASLER RELAY STANDARDS, DIMENSIONS, ACCESSORIES Request bulletin SDA
BE1-59NC CAPACITOR NEUTRAL OVERVOLTAGE RELAY The BE1-59NC Capacitor Neutral Overvoltage Relay provides sensitive protection for capacitor banks. ADDITIONAL INFORMATION INSTRUCTION MANUAL ADVANTAGES Helps
More informationORDERING Page 6 STANDARDS, DIMENSIONS and ACCESSORIES Request bulletin SDA
BE1-59NC CAPACITOR NEUTRAL OVERVOLTAGE RELAY The BE1-59NC Capacitor Neutral Overvoltage Relay provides sensitive protection for capacitor banks. ADVANTAGES Helps avoid cascading capacitor failures. Sensing
More informationFibre Optic Modem ODW-622
Fibre Optic Modem ODW-622 RS-232 to fibre optic link, redundant ring or multidrop applications The ODW-622 can be used to create either redundant ring or multidrop solutions for devices with RS-232 interfaces.
More informationInstallation and User Guide 458/CTR8 8-Channel Ballast Controller Module
Installation and User Guide 458/CTR8 8-Channel Ballast Controller Module Helvar Data is subject to change without notice. www.helvar.com i Contents Section Page Introduction 1 Installation 2 1. Attach
More informationUser Guide UD51. Second encoder small option module for Unidrive. Part Number: Issue Number: 5.
EF User Guide UD51 Second encoder small option module for Unidrive Part Number: 0460-0084-05 Issue Number: 5 www.controltechniques.com Safety Information The option card and its associated drive are intended
More informationMG-XV operating instruction. Measuring of norm signals, 4-8-digit. Panel instrument type MG-BV Construction instrument type MG-AV
MG-XV operating instruction Measuring of norm signals, 4-8-digit Panel instrument type MG-BV Construction instrument type MG-AV Contents 1. Brief description... 3 2. Safety instructions... 3 2.1. Proper
More informationDatasheet - SRB-E-201ST
27.04.2016-16:36:21h Datasheet - SRB-E-201ST Multi-function safety modules / SRB-E-201ST STOP 0 Function 1 oder 2-channel control Start button / Auto-start Monitoring two-hand control panels to EN 574
More informationFP-QUAD-510. Features. Power Requirement OPERATING INSTRUCTIONS. 4-Axis, Quadrature Input Module
OPERATING INSTRUCTIONS FP-QUAD-510 4-Axis, Quadrature Input Module These operating instructions describe the installation, features, and characteristics of the FP-QUAD-510. For details on configuring and
More informationType Contact form Model
Low Signal Relay G6A High sensitivity can be driven by digital circuits. Low-profile design allows use in.70 mm (0.50 in) PC board rack. Surge withstand meets FCC Part 68 regulation. Units can be mounted
More informationSpecial Applications Modules
(IC697HSC700) datasheet Features 59 1 IC697HSC700 a45425 Single slot module Five selectable counter types 12 single-ended or differential inputs TTL, Non-TTL and Magnetic Pickup input thresholds Four positive
More informationREGO Start&Go USER MANUAL
REGO Start&Go USER MANUAL Version 0 Rev. B of 03/03/16 Page 1 of 15 Introduction The purpose of the manual is to describe all of the steps required to commission and correctly operate the REGO Start&Go
More informationType Contact form Model Ag (Au clad) Standard DPDT G6A-274P-ST-US Low-sensitivity DPDT G6A-274P-ST40-US
Low Signal Relay G6A Fullly Sealed Relay with High Impulse Withstand High sensitivity can be driven by digital circuits. Low-profile design allows use in 12.70 mm PC board rack. Surge withstand meets FCC
More informationAdvantys STB DATA SHEET. Advantys STB Output Module. Description. Features
Advantys STB Advantys STB Output Module DATA SHEET Description The Advantys model STBDAO5260 Digital Output Module provides 2 isolated discrete output points that operate on a 115 VAC power source. The
More informationMulti-functional safety relay modules PROTECT SRB-E
Multi-functional safety relay modules PROTECT SRB-E PROTECT SRB-E The configurable User-friendly Up to 16 different applications can be selected Monitoring of all conventional safety switchgear Safety
More informationOperating instructions Electronic preset counter Type series 717
Operating instructions Electronic preset counter Type series 717 1. Description 5.98.3_gb 6-digit adding/subtracting counter with two presets Very bright 8mm high LED display Counting and preset range
More informationSIMATRIX NEO V2 Modular Video Matrix
SIMATRIX NEO V2 Modular Video Matrix SIMNEO-168 V2 Modular design Expandable up to 224 video inputs, 32 video outputs Up to 8 keyboards can be connected for control Multiple protocol driver for the direct
More informationMCR3 POWER EQUIPMENT. Microprocessor Controlled Constant Current Regulator. Compliance with Standards. Uses. Features
Microprocessor Controlled Constant Current Regulator Compliance with Standards FAA: ICAO: IEC: 61822 CENELEC: AC 150/5345-10 (current edition), L-828, L-829. Aerodrome Design Manual Part 5, para. 3.2 (current
More informationOrdering details. Approval. Classification
Datasheet - SRB 301MC-24V Guard door monitors and Safety control modules for Emergency Stop applications / General Purpose safety controllers (Series PROTECT SRB) / SRB 301MC Fit for signal evaluation
More information2 WIRE - LOOP POWERED TRANSMITTER FOR PT100 AND NI100 PROBES
EN K20RTD 2 WIRE - LOOP POWERED TRANSMITTER FOR PT00 AND NI00 PROBES General Description The K20RTD instrument converts a temperature signal read by a PT00 (EN 60 75) or NI00 probe with connection by 2,
More informationVideo Detector Switch. VDS Video Detector Switch VDS-3 Video Detector Switch, 3 Channel VSA Video Detector Switch with Audio
The VDS, VDS-3 and VSA Video Detector Switch VDS Video Detector Switch VDS-3 Video Detector Switch, 3 Channel VSA Video Detector Switch with Audio Manual Version 3.0 BURST ELECTRONICS INC ALBUQUERQUE,
More informationSignal Conditioners. Highlights. Battery powered. Line powered. Multi-purpose. Modular-style. Multi-channel. Charge & impedance converters
Signal Conditioners Highlights Battery powered Line powered Multi-purpose Modular-style Multi-channel Charge & impedance converters Industrial charge amplifiers & sensor simulators PCB Piezotronics, Inc.
More informationMultiple Band Outdoor Block Up- and Downconverters
Multiple Band Outdoor Block Up- and Downconverters Vertical Mount Option RF IF LO Frequency Frequency Frequency Model Band (GHz) (MHz) (GHz) Number Block Upconverters 1 12.75 13.25 0.95 1.45 11.8 UPB2-WS-13.625
More informationType Contact form Model PCB SPDT G6E-134P-ST-US G6E-134PL-ST-US. Type Contact form Model
Low Signal Relay G6E Subminiature 7.87 H x.1 W x 16 L mm (0.31 H x 0.3 W x 0.63 L in). High sensitivity with pick-up coil power of 8 mw. Surge withstand meets FCC Part 68 rule and Telcordia 2.5 kv Specifications.
More informationLinear flow controls VFC Linear flow controls with actuator IFC
Linear flow controls VFC Linear flow controls with actuator Product brochure GB 3 Edition 01.16 Linear relationship between adjustment angle and flow rate Large control ratio of 25:1 Actuators IC 20 or
More informationAnalogue output module DAO 081
ANALOGUE OUTPUT MODULE DAO 081 Analogue output module DAO 081 for eight ±10 V DC outputs This analogue output module is used for driving components capable of being analogue driven (e.g. proportional pressure
More informationQUICK START GUIDE FLEXSLICE MODULES
TECHNOLOGY POWER ETHERCAT OUT ETHERCAT IN STATUS LED S POWER AND I/O STATUS LED S USER TAB EBUS CONNECTOR LOCK QUICK START GUIDE FLEXSLICE MODULES P366 P371 P372 P375 P376 P377 P378 P379 description The
More informationModel Number Structure
Cycle Control Units CSM DS_E_7_1 Refer to Safety Precautions for All Power Controllers. Used in Combination with the to Enable High-precision Temperature Control Use cycle control to achieve power control
More informationArc Detecting and Protection System
Data Sheet Arc Detecting and Protection System Protection of Switchboards Personnel safety, the cost of employees. Loss of supply and operation of the switchboard, the cost of a production down time. Damage
More informationmulti-function meters
multi-function meters eclipse 2 eclipse 7 installation and operating manual 1 GENERAL DESCRIPTION 2 INSTALLATION 3 WIRING INFORMATION 4 2 ECLIPSE 2 METERS 2.1 PROGRAMMING THE METER 5 2.2 INFORMATION 6
More informationSPECIFICATION CSB.01.A.001. Cellular Booster 850/1900 MHz 2x SMA(F) Connectors and DC Power Connector
SPECIFICATION Part No: Product Name: Features: CSB.01.A.001 Cellular Booster 850/1900 MHz 2x SMA(F) Connectors and DC Power Connector 15dB Gain Cellular Signal Booster Frequency: 824-894MHz, 1850-1990
More informationOne channel video link With duplex data and contact closure
User Manual One channel video link With duplex data and contact closure CFO First Mile series consist of fi bre optic modems which provide a high quality and losless video transmission for variety of CCTV
More informationIP Roombox. Hotel Room Management
Hotel Room Management Hotel solutions Versatile room management system You need a simple solution which allows you to control all the hotel room electrical applications? Hager offers you a unique combination
More information02/11/2015
24 x 48 Totalizers CTR24 non-backlit model Part number 87622062 Display : 8-digit LCD, height 8 mm Powered by a lithium battery Counter inputs : solid state (4-30 VDC) or voltage (10 260 VAC) Reset on
More informationLONWORKS Fibre Optic Router
LONWORKS Fiber Optic Router LRW-112 and LRW-112/PP LONWORKS to fibre optic link, multidrop and redundant ring applications The LRW-112 router offers an easy way to extend the distance between LONWORKS
More informationWC-2100 WORD CLOCK DISTRIBUTION AMPLIFIER INSTRUCTION MANUAL
WC-2100 WORD CLOCK DISTRIBUTION AMPLIFIER INSTRUCTION MANUAL SIGMA ELECTRONICS, INC. P.O. Box 448 1027 COMMERCIAL AVE. EAST PETERSBURG, PA 17520-0448 (717) 569-2681 WC-2100 WORK CLOCK DISTRIBUTION AMPLIFIER
More informationStandard signal metering in wall-mounting case
User manual AKV-2VR4C Standard signal metering in wall-mounting case Technical features: Digit height: 20 mm Colour: red Range of display: -999 9999 Wall-mounting case: black, made of ABS-plastic Protection
More information2 2 Relay outputs. M DIN W72 H7mm. LE7 Weekly/Yearly timer
LE7M-2 W72 H72mm, Weekly/Yearly Timer Features Easy to check and change the program setting Customizable weekly or yearly unit time setting and control by user Includes daylight saving time function Built-in
More informationLVDT. Inductive Position Transducer - Hydraulic Series. SM-HYD Hydraulic Series. Key-Features:
HM 1808 LVDT Inductive Position Transducer - Hydraulic Series SM-HYD Hydraulic Series Key-Features: Content: - Screw flange M18x1,5 / M30x1,5 or plug-in flange Ø18 - Pressure up to 400 bar - Measurement
More informationHigh Performance Outdoor Test Translators
Input Output LO Frequency Frequency Frequency Model (GHz) (GHz) (GHz) Number RF Transmit-Band to RF Receive-Band 5.85 6.425 3.625 4.2 2.225 DN-WS-6.1/3.9 5.85 6.65 3.4 4.2 2.45 DN-WS-6.25/3.8 6.725 7.025
More informationCSB.01.A.001. Cellular Booster 850/1900 MHz 2x SMA(F) Connectors and DC Power Connector
CSB.01.A.001 Specification Part No. Product Name Features CSB.01.A.001 Cellular Booster 850/1900 MHz 2x SMA(F) Connectors and DC Power Connector 15dB Gain Cellular Signal Booster Frequency: 824-894MHz,
More informationDATA SHEET. The Advantys model STBDAI5260 Digital Input Module provides 2 isolated discrete input points that operate on a 115 VAC power source.
Advantys STB Advantys STB Input Module DATA SHEET Description The Advantys model STBDAI5260 Digital Input Module provides 2 isolated discrete input points that operate on a 115 VAC power source. Features
More informationLinear flow control with actuator IFC
Linear flow control with actuator Product brochure GB 3 Edition 01.14 Linear relationship between adjustment angle and flow rate Large control ratio of 25:1 EC type-tested and certified Actuators IC 20
More informationOperating Instructions
COUNTERS CONTROLLERS ENCODERS Operating Instructions Electronic Preselection Counter Two preselections NE 216 Contents Page 1 Safety indications... 2 2 Get to know your NE 216... 4 2.1 NE216 components...
More informationAbsolute Encoders Multiturn
The Sendix 5863 and 5883 multiturn encoders with SSI or BiSS-C interface and optical sensor technology can achieve a resolution of max. 29 bits. A through hollow shaft up to 4 mm and a blind hollow shaft
More informationAF-300 E11 Adjustable Frequency Drive
AF-300 E11 Adjustable Frequency Drive The AF-300 E11 adjustable frequency drive is GE s new generation of micro drives. GE recognized your need for a high-performance, full-featured compact drive and designed
More information1.5mm amplitude at 10 to 55Hz frequency in each X, Y, Z direction for 2 hours 500m/s² (approx. 50G) in each X, Y, Z direction for 3 times
Color Mark Color Mark Feature Outstanding color matching accuracy - RGB light emitting diodes and 12-bit resolution - 2 detection modes (color only / color + intensity) - -step sensitivity adjustment for
More informationMICROMASTER Encoder Module
MICROMASTER Encoder Module Operating Instructions Issue 01/02 User Documentation Foreword Issue 01/02 1 Foreword Qualified Personnel For the purpose of this Instruction Manual and product labels, a Qualified
More informationIntelligent Security and Fire Ltd
User Manual Product ranges covered by this manual Vi-P14 Vi-P14A Document Reference Date Firmware Vi-Q4C1 Viq601a.doc 26/11/2009 From Viq001a21 Videoswitch Telephone 01252-851510 Ocean House, Redfields
More informationTrusted 40 Channel 120 Vac Digital Input FTA
PD-T8824 Trusted Trusted 40 Channel 120 Vac Digital Input FTA Product Overview The Trusted 40 Channel 120 Vac Digital Input Field Termination Assembly (FTA) T8824 is designed to act as the main interface
More informationDatasheet - SRB301LC 24VAC/DC
25.02.2016-18:05:23h Datasheet - SRB301LC 24VAC/DC Guard door monitors and Safety control modules for Emergency Stop applications / General Purpose safety controllers (Series PROTECT SRB) / SRB301LC Preferred
More informationAnalog Input Module HART Ex n Inputs, 8 Channels Series 9461/15
> 8 channels for 2-wire HART transmitters > Inputs for Ex nl, Ex na and Nonincendive > Galvanic separation between inputs and system > Open-circuit and short-circuit monitoring for each field circuit >
More informationFibre optic router for TP/FT-10 LRW-112PP
Fibre optic router for TP/FT-10 LRW-112PP Lo n Wo r k s to fibre optic link, point-to-point applications The LRW-112PP router offers an easy way to extend the distance between LONWORKS 78 kbit/s TP/FT
More informationVM-100R. 1 RU HEIGHT PROGRAMMABLE 70 AND 140 MHz HIGH-PERFORMANCE VIDEO/AUDIO MODULATOR
VM-100R 1 RU HEIGHT PROGRAMMABLE 70 AND 140 MHz HIGH-PERFORMANCE VIDEO/AUDIO MODULATOR OPTIONS Up to four internal programmable audio subcarrier modulators Support full I:N redundant multiformat configurations,
More informationTrusted 40 Channel 120 Vac Digital Input FTA
ICSTT-RM290F-EN-P (PD-T8824) Trusted Product Overview The Trusted 40 Channel 120 Vac Digital Input Field Termination Assembly (FTA) T8824 is designed to act as the main interface between a field device
More informationMULTIS LMp / LMg. Systèmes de Coupure et de Protection Switching and Protection Systems
I MULTIS LMp / LMg F Notice d utilisation GB Operating instructions D Bedienungsanleitung NL Gebruiksaanwijzing Istruzioni per l uso SP Instrucciones de servicio P Manual de instruções Systèmes de Coupure
More informationKu-Band Redundant LNB Systems. 1:1 System RF IN (WR75) TEST IN -40 db OFFLINE IN CONTROLLER. 1:2 System POL 1 IN (WR75) TEST IN -40 db POL 2 IN
BRK-1000 Series Ku-Band Redundant LNB Systems Introduction Redundant LNB systems minimize system downtime due to LNB failure by providing a spare LNB and an automatic means of switching to the spare upon
More information1310nm Single Channel Optical Transmitter
0nm Single Channel Optical Transmitter TRPVGETC000EG Pb Product Description The TRPVGETC000EG is a single channel optical transmitter module designed to transmit optical serial digital signals as defined
More informationDigital Circuits I and II Nov. 17, 1999
Physics 623 Digital Circuits I and II Nov. 17, 1999 Digital Circuits I 1 Purpose To introduce the basic principles of digital circuitry. To understand the small signal response of various gates and circuits
More informationODW-621. RS-232 Point-to-point applications
Re-timing Data rate up to 250 kbit/s 9-position D-sub connector Redundant power supply inputs Status interface for fault indication Fibre link fault indication (Red) Design for harsh environments 40 to
More informationLONWORKS Fibre Optic Converter
LONWORKS Fiber Optic Converter LRW-102 and LRW-102/PP LONWORKS to fibre optic link, multidrop and redundant ring applications The LRW-102 is a fibre optic modem designed for multidrop and redundant ring
More informationALM-6813/6812 INSTALLATION AND PROGRAMMING MANUAL
ALM-6813/6812 INSTALLATION AND PROGRAMMING MANUAL Installation and programming Manual v2.2 1 MARSS Solar Defender SYSTEM This guidebook provides the essential instructions to install and configure the
More informationUSER S MANUAL. FX2N-8AD Analog input block
USER S MANUAL FX2N-8AD Analog input block FX2N-8AD Analog input block Foreword This manual contains text, diagrams and explanations which will guide the reader in the correct installation and operation
More informationCMX683 Call Progress and "Voice" Detector
CML Microcircuits COMMUNICATION SEMICONDUCTORS D/683/2 May 2006 Call Progress and "Voice" Detector Provisional Issue Features Applications Detects Single and Dual Call Progress Tones Worldwide Payphone
More informationData Sheet GU-LCT-RY-V1-10 GU-LCT-RY-V1-11
Data Sheet GU-LCT-RY-V1-10 Part No.: AA-10276-001 Optical Input / Output: Glass Fibre GU-LCT-RY-V1-11 Part No.: AA-10276-002 Optical Input / Output: Plastic (POF) Picture shows AA-10276-001 (Glass Fibre)
More informationIndustriefunkuhren. Technical Manual. IRIG-B Generator-Module for analogue / digital Signals of Type: IRIG-B / IEEE C / AFNOR NF S87-500
Industriefunkuhren Technical Manual IRIG-B Generator-Module for analogue / digital Signals of Type: IRIG-B / IEEE C37.118 / AFNOR NF S87-500 Module 7628 ENGLISH Version: 02.01-06.03.2013 2 / 20 7628 IRIG-B
More informationAdvanced Test Equipment Rentals ATEC (2832)
Established 1981 Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (2832) This product is no longer carried in our catalog. AFG 2020 Characteristics Features Ordering Information Characteristics
More information2-output DALI controller
87045 LIMOGES Cedex Telephone: (+33) 05 55 06 87 87 - Fax: (+33) 05 55 06 88 88 -output DALI controller Page. Use.... Technical features... 3. Overall dimensions.... 4. Connection... 5. Installation...3
More informationLt DELTA USA, Inc
Infrared LOOP SCANNER Rota-Sonde TS2006 Infrared - high sensitivity 480 F or 750 F Quick and easy commissioning Self-monitoring and alarm functions Lt 1037 1 Applications R o t a - S o n d e TS2 0 0 6
More informationDA E: Series of Narrowband or Wideband Distribution Amplifiers
DA1-150-10-E: Series of Narrowband or Wideband Distribution Amplifiers Key Features Dual A and B inputs. Automatic or manual switchover, configured by the Ethernet port. 1-150 MHz wideband operation. Other
More information