SWM EXTENSION SD SWMA2 LINE AMPLIFIER SITUATION

Transcription

1 SITUATION The output of a SWM8, SWM16 or SWM32 is split to multiple rooms and the receiver signal levels are low at distant locations. SOLUTION Model boosts SWM 940 to 2150 MHz signals offsetting the loss of 150 feet of RG-6 while bidirectionally passing 2 to 806 MHz, and receiver control signals. RELATED CONSIDERATIONS signals in the 475 to 625 MHz band generated in multi-room viewing systems pass through the. signals in the 475 to 625 MHz band generated in Residential Experience (DRE) systems for communications pass through the. FEATURES E Split bandwidth to 2150 MHz Amplified to 806 MHz Passive High Output Ability dbm Indoor / Outdoor case die cast aluminum Multiple power options line or external APPLICATION P AT I NOTES Model -T extends SWM drop distances while passing bidirectional 2 MHz control signals and 475 to 625 MHz () multi-room viewing signals. Room 1 acts as a media server for a custom home. Multiple DVR s located on the output are accessible from receivers on the SWM1 output. Some rooms in the home are greater than 150 feet and need SWM amplification. Model provides SWM amplification while maintaining an budget of 45 db. SWM EXTENSION -T DESCRIPTION Powers AMP Indoor / Outdoor DBS line powered amplifier with 940 to 2150 MHz forward gain and passive 2 MHz to 806 MHz return. Legacy 1 Legacy 2 Legacy 3 Legacy 4 1Out 2Out -37 dbm SPLT2 ROOM 1-42 dbm DBS2 DBS2 PWR SWM1PWR IDF CLOSET 100 ft -13 db -2 db SWM - db ft ROOM 2-53 dbm -14 dbm H25 HD RCVR LE AMPLIFIER Revised Nov 2 20

2 SWITCH EXTENSION Legacy 1 Legacy 2 Legacy 3 18V 13V 8 Channel SWM SWM1PWR OFF-AIR Model SWM32 and SWM8 switches includes off-air inputs that pass the signal from the SWM outputs. Model -T amplifies the SWM output and passes the signals back through the Off-air inputs to the modem. SWM32 SWM32 LE AMPLIFIER (Model SWM16 switches do not have off-air inputs but can be used with model SD SWMD3 external diplexers) SPECIFICATIONS S Specifications... Typical... QC Limit Gain 2 to 806 MHz db...-4 db 940 to 1450 MHz... db db 1450 to 2150 MHz...15 db...14 db Maximum Output (32 equal transponders)...-1 dbm Maximum Output Power IM2 with 2 0 dbm dbc dbc min. IM3 with 2 0 dbm dbc dbc min. Pass band Flatness Any 24 MHz band db db Input Return Loss... db... 9 db Output Return Loss...13 db db Noise Figure...6 db... 7 db Power Specifications Voltage...10 to 29 V Current...98 ma / channel Model -T transformer... V ma Environmental Specifications Operating Environment:...Indoor/Outdoor Ambient Temperature...-30º C to +60ºC P1 P2 2x8 1000A Model 2x8 power divider and 1000A power supply may be used to eliminate the (4) - power supplies that are included with model SD SWMA2-T. Order model to receive the amplifier without power supply. Mechanical Specifications Dimensions x 1.4 x 1.1 Weight... 4 oz, (0.2 kg) Master Carton QTY... (44 units) Master Carton Size x 9 x 9 Master Carton Weight...21 lb.. (9.5 kg) Mechanical Specifications T Weight... 6 oz, (0.2 kg) Master Carton QTY... (80 units) Master Carton Size... x 15 x 15 Master Carton Weight lb.. (13.5 kg) Revised Nov 2 20

3 SWM EXTENDER 3 SWiM Output amplifier with integrated return-band diplexer Provides 14 db of gain which offsets an additional 150 ft of RG-6 or feet of RG-11 cable runs Passes 2 to 806 MHz signals for SWM & communication Legacy 1 Legacy 2 Legacy 3 8 Channel SWM OFF-AIR SWM1PWR Parameter UNIT -T Operating Frequency Range MHz MHz MHz (SWiM) 2.3 (FSK Communication Channel) (, ) Distortion (2) Tone Output Composite Output per Tone Distortion 2nd & 3 rd Order dbm dbm dbc Number of Input / Output Ports Each (1) F Input / Output Return Loss 2 to 40 MHz 54 to 2150 MHz Gain / Loss db db Note > 8 db > 10 db 2.2 MHz db -3 maximum 475 MHz db -2 maximum 625 MHz db -2 maximum 940 MHz db 13 minimum 2150 MHz db 14 minimum 36 MHz db ± 0.25 Power Model Power pass (Output to Input) ma 1500 (max) Input Voltage V 10 (min.), 29 (max.) from Input, Output or SM Power Adaptor AMP Power Connector Type (1) F Power Indication Each Green LED Power Consumption W V max Lightning Surge Protection 32V p-p, max shunt current 200A; 8 msec, 1.5kW max dissipation Ground Screw Each 2 Screw Ground points Dimensions L x W x H mm 89 x 101 x 23 Environmental Requirements Indoor Only Operating Temperature range ºC -34 to + 60 Indoor / Lock box Humidity Shall survive 95% relative humidity over operating temperature Revised Nov 2 20

4 SONORA DESIGN POWER SUPPLIES 4 Power Supply UL Approved Small Footprint F-Connector for Output Overload Protection Parameter UNIT Rated Input Voltage Vac 100 to 240 Operating Input Range Vac 90 to 264 Rated Input Frequency Hz 47 to 63 Rated Input Current A 0.15 max No Load Input Current ma < 15 Maximum Input Power W 5.01 AC Input Connector Type US P Nominal Output Voltage Vdc Rated load current A 0.25 max Minimum load current A 0.0 A Ripple & Noise mvp-p 100 Output Cable Feet 1 Switching Efficiency % 59 Power Connector Type Each (1) F Female Adaptor included Each (1) F71 Male to Male Short Circuit Protection Yes, Multi fuse Dimensions L x W x H mm 56 x 35 x 24 Environmental Requirements Indoor use only Ambient Temperature range ºC 0 to + 45 Humidity Shall survive 90% relative humidity over operating temperature Safety Ratings Agencies USA Canada Europe Japan Taiwan China Britain UL60950 CSA C22.2 NO.950 TUV/VDE-EN60950 J60950(H14)/J55001(H14) CNS13438 GB EN :2000 Revised Nov 2 20

5 MULTI-ROOM VIEWG 5 Legacy 1 Legacy 2 Legacy 3 Legacy 4 1Out 2Out HR34 DVR SWM5-54 dbm PWR SWM1PWR RECORDG PROGRAM -40 dbm 150 ft - db -40 dbm 150 ft - db System installers report a 150 foot RG-6 maximum drop distance from a SWM16 through two SLPIT8 splitters is allowed by. SWM Port 1 to SPLIT8, 150 feet RG-6 to Receiver SWM Port 2 to SPLIT8, 150 feet RG-6 to Receiver The SWM signal at 1840 MHz after the 150 feet is -54 dbm. Total 625 MHz loss HR24 to HR34: 47 db 150 ft RG db... db SWM db... db 150 ft RG db SAT1 SAT2-54 dbm Legacy 1 Legacy 2 Legacy 3 Legacy 4 1Out 2Out SAT1 HR34 DVR SWM5 SAT2-47 dbm -48 dbm PWR SWM1PWR RECORDG PROGRAM SPLIT4-38 dbm 100 ft -2 db ft -14 dbm - db -26 dbm -15 db HD DRV receivers have (2) to (5) tuners. Each SWM output is capable of serving (8) tuners. signal can be conserved by using a SPLIT4 on one SWM output. Receivers located more than 150 feet from the SWM16 are connected to the amplified SWM output. Model SD SWMA2-T amplifies the SWM channels and passes the signals. The SWM signal at 1840 MHz after the feet is -49 dbm. Total 625 MHz loss HR24 to HR34: 47 db 100 ft RG db MSPLIT db SWM db... 2 db... db ft RG db Revised Nov 2 20