DL2 Downlight Fixture Type #2 Calculite C8L35 DL 40K W CL W New Construction

Transcription

1 New Light Fixtures for Club One: DL1 Downlight Fixture Type #1 Cree CR6 800L 40K 12 E26 DL2 Downlight Fixture Type #2 Calculite C8L35 DL 40K W CL W New Construction LI2 Lay In 2X2 Direct/Inirect Cree ZR22 32L HE 4000K Spining Fan = MinkaAire F889 (7 Diameter IN EITHER Oil Rubbed Bronze, Smoked Iron or Brushed Nickel ) (Electrician to Confirm Voltage 120 or 277)

2 RC6 Six-Inch Recessed Housing Product Description The RC6 recessed housing is designed to accommodate Cree six-inch downlights in new construction applications. It is rated for use with luminaires that have low-wattage ratings, such as the LR6 and CR6, optimizing energy density calculations for easier energy code compliance and LEED certification. The RC6 housing is IC rated, airtight, inherently protected and, when ordered with a GU24 socket, California Title-24 compliant. RC6 Product Specifications CONSTRUCTION & MATERIALS Recessed housing with integral nailer and ceiling grid attachment accommodates Cree six-inch LED downlights in ceiling thicknesses from 0.25 to Gasketed housing enables air-tight fit to effectively isolate housing assembly from conditioned space below. Adjustable bar-hangers span from 14 to 24.5 without sag. Suitable for insulated or non-insulated ceilings. Dimensions: L 12.5 x W 7.5 x H 7.5 REGULATORY & VOLUNTARY QUALIFICATIONS 7.5 culus Listed IC air-tight rated, tested in accordance with ASTM E283. Title-24 compliant when utilized with GU24 socket. 7.5 Suitable for damp locations. Compatible Downlights RC6-12W RC6-12W-GU24 RC6-277V CR6 Series with E26 base CR6 Series with GU24 base LR6-277V Products 12.5 LR6 Series with E26 base LR6 Series with GU24 base LR6-DR V Products LE6 Series wtih E26 base LE6 Series with GU24 base Ordering Information Example: RC6-12W Product RC6-12W 120V, Edison Socket RC6-12W-GU24 120V, GU24 Socket RC6-277V 277V, 277V Connector DL1 Downlight Fixture Type #1 Cree CR6 800L 40K 12 E Cree, Inc. and/or one of its subsidiaries. All rights reserved. For informational purposes only. See for patents that cover these products. Cree, and the Cree logo are registered trademarks of Cree, Inc. or one of its subsidiaries. Rev. Date 01/22/ T (800) F (262)

3 CR6 6" LED Downlight Product Description The CR6 LED downlight delivers up to 800 lumens of exceptional 90+ CRI light while achieving up to 67 lumens per watt. This breakthrough performance is achieved by combining the high efficacy and high-quality light of Cree TrueWhite Technology. The CR6 is available in a warm color temperature and has a variety of trim options. It easily installs into most standard six-inch recessed IC or non-ic housings, making the CR6 perfect for use in both residential and light commercial, new construction or retrofit, applications. Performance Summary Utilizes Cree TrueWhite Technology Delivered Light Output: 625, 800 lumens Input Power: 9.5, 12 watts CRI: 90 CCT: 2700K, 3000K, 3500K, 4000K Limited Warranty : 5 years Lifetime: Designed to last 50,000 hours Dimming: Dimmable to 5%* Housings & Accessories Reference Housing & Accessory documents for more details. Trims & Reflectors 6.25" CT6A Diffuse silver reflector CT6AW Diffuse wheat reflector CT6AB Diffuse black reflector CT6BB Flat black flange and reflector Housings (GU24 Only) 7.5" H6 Architectural RC6 New Construction RR6 Retrofit SC6 Cylindrical Surface Mount SC6-CM Cylindrical Cord Mount SC6-WM Cylindrical Wall Mount Ordering Information Example: CR6-625L-27K-12-E26 For full list of Cree Quick Ship products visit CR6 12 Series Size Source Lumen Output CCT Voltage Base Type CR6 6 6 inch 625L 625 Lumens 800L 800 Lumens 27K 2700K 30K 3000K 35K 3500K 40K 4000K Volts E26 Edison Base GU24 GU24 Base (Title 24 Compliant) See for warranty terms * Reference for recommended dimmers DL1 Downlight Fixture Type #1 Cree CR6 800L 40K 12 E26 Rev. Date V2 08/25/2014 US: T (800) F (262) Canada: T (800) F (800)

4 CR6 DL1 Downlight Fixture Type #1 Cree CR6 800L 40K 12 E26 Product Specifications CREE TRUEWHITE TECHNOLOGY A revolutionary way to generate high-quality white light, Cree TrueWhite Technology is a patented approach that delivers an exclusive combination of 90+ CRI, beautiful light characteristics, and lifelong color consistency, all while maintaining high luminous efficacy - a true no compromise solution. CONSTRUCTION & MATERIALS Durable upper housing protects LEDs, driver and power supply. Adjustable flip clips resist heat while providing retention for flush ceiling fit. Thermal management system uses both upper housing and lower reflector to conduct heat away from LEDs and transfer it to the plenum space for optimal performance. LED junction temperatures stay below specified maximum even when installed in insulated ceilings. Suitable for insulated and non-insulated ceilings One-piece aluminum lower reflector redirects light while also conducting heat away from LEDs. It creates a comfortable visual transition from the lens to the ceiling plane and easily accommodates CT6 snap-in trims OPTICAL SYSTEM Unique combination of reflective and refractive optical components achieves a uniform, comfortable appearance while eliminating pixelation and color fringing. This ensures smooth light patterns are projected with no hot spots and minimal striations Components work together to optimize distribution, balancing the delivery of high illuminance levels on horizontal surfaces with an ideal amount of light on walls and vertical surfaces. This increases the perception of spaciousness Diffusing lens shields direct view of LEDs while lower reflector balances brightness of lens with the ceiling to create a low-glare high angle appearance ELECTRICAL SYSTEM Integral, high-efficiency driver and power supply Power Factor: > 0.9 Input Voltage: 120V, 60Hz Dimming: Dimmable to 5% with most incandescent dimmers* REGULATORY & VOLUNTARY QUALIFICATIONS ENERGY STAR qualified culus Listed Exceeds California Title-24 high efficacy luminaire requirements Suitable for wet locations * Reference for recommended dimmers Photometry CR6 BASED ON ONSPEX REPORT #: CR6-625L: MULTIPLY BY Zonal Lumen Summary Zone Lumens % Lamp % Fix % 42.10% % 64.60% % 90.60% % 100% Installation Designed to easily install in standard 6" downlight housings from Cree and other manufacturers* Quick install system utilizes a unique retention feature. Simply attach socket to CR6. Move light to ready position and slide into housing Intensity (Candlepower) Summary Angle Mean CP Reference for detailed photometric data. NOTE: Reference for detailed installation instructions. *Reference for a list of compatible housings Application Reference Open Space Spacing Lumens Wattage LPW w/ft 2 Average FC Corridor Spacing Lumens Wattage LPW w/ft 2 Average FC 4 x ' on Center x x x ' on Center ' on Center ' on Center x ' on Center x x x ' Ceiling, 80/50/20 Reflectances, 2.5 workplane. LLF: 1.0 Initial. Open Space: 50' x 40' x 10' 6' on Center ' on Center ' on Center ' Ceiling, 80/50/20 Reflectances, Light levels on the ground. LLF: 1.0 Initial. Corridor: 6' Wide x 100' Long 2014 Cree, Inc. and/or one of its subsidiaries. All rights reserved. For informational purposes only. Content is subject to change. See for patents that cover these products. Cree, the Cree logo, TrueWhite, Cree TrueWhite, and the Cree TrueWhite Technology logo are registered trademarks, and CR6 and the Quick Ship logo are trademarks of Cree, Inc. and/or one of its subsidiaries. ENERGY STAR and the ENERGY STAR logo are registered trademarks of the U.S. Environmental Protection Agency. The UL logo is a registered trademark of UL LLC. US: T (800) F (262) Canada: T (800) F (800)

5 C8L35DL (W) Calculite LED 8" Downlight Wide Beam Page 1 of 2 Catalog number: Notes: Type: A A 9 9 7/8 12 1/2 8 5/8 9 7/8 Ordering Guide: Light Engines 9 1/2 15 1/2 Light Engine Series Style Color Temperature Beam Spread Reflector Finish Flange Version C8L35 DL (Downlight) 27K (2700K) 30K (3000K) 35K (3500K) 40K (4000K) W (Wide beam, 1.2 s.c.) CL (Clear) CCL (Comfort Clear) CCD (Comfort Clear Diffuse) CCZ (Champagne Bronze) W (Painted white) P (Aperture-matching/polished) VA Ordering Guide: Frame-in Kits Frame-in Kit Series Installation Options Input Voltage Options C8L35 (3500 Lumen) N (New construction) 1 (120V) 2 (277V) Blank (0-10 volt dimming) Features Aperture: 8 5/8" (219mm) I.D., 9 7/8" (251mm) O.D. Input Wattage: 60W (3500 Lumens). Reflector Cone: Aluminum. Provides 50 cutoff to source and source image. Self flanged. Depth (including Frame-in kit): 8 1/8" (206mm) Power Connection: Attaches to frame-in kit via push-in connector (on frame). Removable cover provides access. Technology LED Board: Array of 22 high brightness royal blue LED's. Remote Phosphor Technology: Remote phosphor technology provides increased efficiency and color consistency. Phosphor lens assembly positioned in front of LED array converts blue light to white. Color shift will not exceed +/- 100K over life. Optical Mixing Chamber: Lightolier-specific mixing chamber redirects backreflected light through aperture resulting in 20% increase in efficiency. Technology (continued) Thermal Management: Heat sink and thermal design along with clean room assembly ensures specified performance. Rated Life: Based on IESNA LM Lumen 35,000 hours at 70% lumen maintenance. Photometric Performance: Tested in accordance to IESNA LM Options Dimming Capability: 0-10V. See LED-DIM specification sheet Emergency Capability (Inverter): See LED-LMI specification sheet Labels UL (suitable for wet locations), cul, I.B.E.W. 5 Year Warranty DL2 Downlight Fixture Type #2 Calculite C8L35 DL 40K W CL W New Construction

6 C8L35DL (W) Calculite LED 8" Downlight Wide Beam Page 2 of 2 Correlated Color Temperature (CCT) Multipliers 2700K (x 0.92), 3000K (x 1.00), 3500K (x 1.07), 4000K (x 1.14) Reflector Finish Multipliers CL (x 1.00), CCL (x 0.94), CCD (x 0.93), CCZ (x 0.76), WH (x 0.82) CL & CCD finishes are tested. CCL, CCZ & WH are calculated LM, 3000K, CL FINISH TRIM Angle MeanCP Lumens Trim: C8L35DL30KWCLW Frame: C8L35N Output lumens: 3431 lm CCT 1 : 3000K 90 0 Input Watts 2 : 64.1 Efficacy: 53.5 lm/w CRI 4 : 79 Spacing Criterion: 1.0 Certified Test Report No: F Single Unit Data Height to Initial Beam Lighted Plane Footcandles Diameter 5' 118 5' 6' 82 6' 7' 60 7' 8' 46 8' 9' 36 9' Multiple Unit Data - RCR 2 Spacing Initial Watts/ On Ctr. Footcandles Sq. Ft. 5' ' ' ' ' 'x38'x10' Room, Workplane 2 ½' above floor, 80/50/20% Reflectances Zonal Lumens & Percentages Zone Lumens %Luminaire % % % % Ceiling 80% 70% 50% 30% 0% Wall RCR Zonal Cavity Method - Effective Floor Cavity Reflectance = 20% Correlated Color Temperature within specs as defined in ANSI_NEMA_ANSLG C : Specifications for the Chromaticity of Solid State Lighting Products. 2. Wattage controlled to within 5%. 3. Tested using absolute photometry as specified in LM79: IESNA Approved Method for the Electrical and Photometric Measurements of Solid-State Lighting Products. 4. Color Rendering Index within +/- 2% DL2 Downlight Fixture Type #2 Calculite C8L35 DL 40K W CL W New Construction Philips Lightolier e: lol.webmaster@philips.com t: (508) w: C8L35DL (W) May 24, 2012 Specifications are subject to change without notice. Koninklijke Philips Electronics N.V., All rights reserved.

7 ZR Series ZR22 2'x2' LED Troffer Product Description The ZR22 LED troffer delivers 3200 lumens of superior 90 CRI light quality and is perfect for both new construction and renovation. Powered by Cree TrueWhite Technology, the slim and lightweight ZR22 LED troffer boasts an efficacy of up to 150 LPW along with 0-10V dimming to meet local energy codes. The ZR22 LED troffer embodies a breakthrough in balancing energy savings, visual comfort and initial cost. Performance Summary Utilizes Cree TrueWhite Technology Efficacy : LPW Delivered Light Output: 3200 lumens Input Power : Watts CRI: 90 CRI 3.9" (99mm) CCT : 3500K; 4000K Input Voltage: VAC Limited Warranty : 10 years 23.7" (602mm) Controls: 0-10V dimming to 5%* Mounting: Recessed** Lifetime: Designed to last from 75,000 hours L70 (standard), 100,000 hours L70 (HE) Accessories 23.7" (602mm) Accessories DGA-22WHT - Drywall Grid Adapter CIF-10V - Wireless 0-10V Dimming/Switching Interface with Cree Smartcast Technology Ordering Information Example: ZR22 32L 35K 10V ZR22 40K 10V Product Initial Delivered Lumens CCT Voltage Controls Options ZR22 32L 35W, 3200 Lumens - 90 LPW 32L HE 21W, 3200 Lumens LPW 35K 3500K 40K 4000K Blank V 10V 0-10V Dimming 5%* EB14*** Emergency Backup See for warranty terms * Reference for recommended dimming controls and wiring diagrams ** Acceptable for use with standard 9/16 T-Bar or larger when installed per installation instructions. Consult factory for non-standard grid applications *** EB option available in US only & not available with HE types LI2 Lay In 2X2 Direct/Inirect Cree ZR22 32L HE 4000K Rev. Date: V1 09/24/2014 US: T (800) F (262) Canada: T (800) F (800)

8 ZR22 2'x2' LED Troffer LI2 Lay In 2X2 Direct/Inirect Cree ZR22 32L HE 4000K Product Specifications CREE TRUEWHITE TECHNOLOGY A revolutionary way to generate high-quality white light, Cree TrueWhite Technology is a patented approach that delivers an exclusive combination of 90+ CRI, beautiful light characteristics, and lifelong color consistency, all while maintaining high luminous efficacy a true no compromise solution. CONSTRUCTION & MATERIALS Durable cold rolled steel housing provides strength and uniformity Ultra-thin 3.9" (99mm) fixture height and lightweight design effectively target a broad range of plenum spaces and allow for easy installations Fixture is pre-painted for enhanced smooth finish Provided t-bar clips and holes for mounting support wires enable recessed or suspended installation Fixture sides and ends are hemmed in for safe, easy handling OPTICAL SYSTEM Unique fixture design creates perfect balance of both horizontal and vertical illumination Optimized smooth lens eliminates pixelation and delivers a low-glare, diffused light distribution ELECTRICAL SYSTEM Cree born components including highly efficacious Cree LED chips along with an integral high-efficiency Cree driver Power Factor : = 0.9 nominal Input Power : Stays constant over life Input Voltage : V, 50/60Hz Battery Backup: Consult factory Operating Temperature Rating: Designed to operate in temperatures 0-35 C and below room side and plenum side Total Harmonic Distortion: < 20% CONTROLS Continuous dimming to 5% with 0-10V DC control protocol For use with Class 2 dimming systems only. Reference for recommended dimming controls and wiring diagrams REGULATORY & VOLUNTARY QUALIFICATIONS UL924 (EB option) culus listed Suitable for damp locations Designed for indoor use DLC qualified when ordered with 32L Initial Delivered Lumens. Please refer to for most current information Photometry ZR22-32L-40K BASED ON CESTL REPORT TEST #: Fixture photometry has been conducted by a NVLAP accredited testing laboratory in accordance with IESNA LM IESNA LM specifies the entire luminaire as the source resulting in a fixture efficiency of 100% Average Luminance Table (cd/m 2 ) Vertical Angle Horizontal Angle ,740 2,927 3, ,564 2,943 3, ,358 3,111 3, ,101 3,614 4, ,7 3,468 4,184 ZR22 Lumen Maintenance 1 Ambient Initial Delievered Lumens Initial Coefficients Of Utilization - Zonal Cavity Method RC %: 80 RW %: RCR: Effective Floor Cavity Reflectance: 20% Zonal Lumen Summary Zone Lumens % Lamp Luminaire % , % , % , % , % Reference for detailed photometric data 25K hr Projected 2 50K hr Calculated 2,3 75K hr Calculated 3 100K hr Calculated 3 Application Reference Open Space Spacing Initial Delivered Lumens Lumens Wattage LPW w/ft 2 Average fc 8 x 8 32L HE ,200 32L x 10 32L HE ,200 32L x 10 32L HE ,200 32L x 12 32L HE ,200 32L ' ceiling: 80/50/20 reflectances; 2.5' workplane, open room. LLF: 1.0 Initial Open Space: 50' x 40' x 10 0 C (32 F) 5 C (41 F) 10 C (50 F) 15 C (59 F) 20 C (68 F) 25 C (77 F) 30 C (86 F) 35 C (95 F) 2014 Cree, Inc. and/or one of its subsidiaries. All rights reserved. For informational purposes only. Content is subject to change. See for patents that cover these products. Cree, the Cree logo, Cree TrueWhite, TrueWhite, and the Cree TrueWhite Technology logo are registered trademarks, and ZR22 and SmartCast are trademarks of Cree, Inc. The UL logo is a registered trademark of UL LLC. The DesignLights Consortium logo and the DLC QPL Listed logo are registered trademarks of Northeast Energy Efficiency Partnerships, Inc. 32L HE L L HE L L HE L L HE L L HE L L HE L L HE L L HE L Lumen maintence values at 25 C are calculated per TM-21 based on LM-80 data and in-situ luminaire testing 2 In accordance with IESNA TM-21-11, Projected Values represent interpolated value based on time durations that are within six times (6X) the IESNA LM total test duration (in hours) for the device under testing ((DUT) i.e. packaged LEDchip) 3 In accordance with IESNA TM-21-11, Calculated Values represent time durations that exceed six times (6X) the IESNA LM total test duration (in hours) for the device under testing ((DUT) i.e. packaged LED chip) US: T (800) F (262) Canada: T (800) F (800)

9 Job Name: Job Type: Quantity: Family: Product Category: Exterior Fan Item#: F889-BNW Finish: Brushed Nickel Wet Certification: Lamping Light Kit: Light Kit Description: Uplight: Dimmable: CRI: Color Temp: Initial Lumens: Delivered Lumens: Rated Life Hours: Shade Shade Description: Shade Material: Shade Quantity: 1 Shade Number: Control Method Control Type: Miscellaneous Safety Cable Included: Shipping Y 1-26w Gu24 Non Dimmable Cfl (Included) Glass Special Hand Held Remote Control System (Included) Carton Weight: Carton Width: 12 Carton Height: Carton Length: Carton Cubic Feet: Master Pack: 1 Master Pack Weight: Master Pack Width: Master Pack Height: Master Pack Length: Master Cubic Feet: *Multi-Pack: Small Package Shippable: Y *For additional information, please contact Customer Care: Measurements Blade Material: Blade Sweep: 84 No. of Blades: 8 Blade Pitch: Downrod 1: 3.5 Downrod 2: 6 Downrod 1 Inside Diameter:.75 Downrod 2 Inside Diameter:.75 Lead Wire: 80 Height (Ceiling to Lowest Point): 16 Height (Ceiling to Blade): 13 Hanging Weight: Motor Size: Low Speed RPM: 48 Amps: 0.21 Watts: 14.7 CFM: 9,173 Medium Speed RPM: 53 Amps: 0.29 Watts: 21.5 PC Construction 14 Degrees DC165 x 30mm Product depicted on this spec sheet is protected by United States Federal and/or State laws including US Patent, Trademark and/or Copyright and unfair competition laws. Unauthorized reproduction or use carries severe legal penalties. CFM: High Speed RPM: 56 Amps: 0.35 Watts: 26.8 CFM: Spining Fan = MinkaAire F889 (7 Diameter IN EITHER Oil Rubbed Bronze, Smoked Iron or Brushed Nickel )