Color Pro DMX Protocol

Transcription

1 Color Pro DMX Protocol Table 2-1. DMX Construct Parameters in Standard Protocol 1 Dim 2 Red (-Cyan) 3 Green (-Magenta) 4 Blue (-Yellow) 5 6 *Note: Effects (Color Pro HX only) Continuous dimming (closed to open) F Open F Periodic Strobe BB Open BC-C3 Random Strobe C4-EF Red 0% Red Full F4-FF Green 0% Green Full F4-FF Blue 0% Blue Full F4 UV (Note: The Red and Green channels must be set to 0 to access UV.) FF Continuous Positioning (open at 0) F Continuous Positioning (open at 64) F Effects (Color Pro FX only) Twinkle Scan (fast to slow) BB Scan Stop BC-C3 Color Scan (slow to fast) C4-FF Iris (Color Pro HX-i only) Continuous Positioning (closed to open) FF Control (Note: The Dim channel must be set to 0 to access Control channel settings.) Safe Display Off C Display Dim E-26 Display Bright Home C-44 Lamp On Lamp Off A-62 Shutdown* (send this value for seconds) Fixture shutdown allows you to remotely deactivate the fixture. When a fixture is shut down, the lamp is extinguished, power to the motors is disabled, and the LED display shows SHUT OFF. If a fixture is in shutdown mode, you must home the fixture to bring it back into operation.

2 1 Dim Continuous Positioning (closed to open) FF Close F 2 Shutter Periodic Strobe (Variable) F (Note: Snap Random/Rand Strobe (Variable) F instantly opens or Random/Sync (Variable) F closes at full Ramp Open/Ramp Shut (Variable) F speed. Ramp opens or closes at Random Ramp/Ramp (Variable) A0-BF specified speeds.) TBD (Reserved for future use) C0-DF Open E0-FF Full Speeds Continuous F Indexed (Divides the wheel into 8 equal sections) F Pure Mix (Only accesses the portion of the wheel used for F color mixing) Spin (Puts all the color wheels in spin mode. Wheel spin speed, direction, or fixed position can be set F individually on Red, Green, and Blue channels) Cycle (3 wheels use color mix portion to cycle colors F Rate set by Red channel) Color Scan (Puts all the color wheels in scan mode. Scans only the continuous color portion of the wheel F not the open white portion. Fixed position or 3 Color Function scanning speed can be set individually on Red, Green, and Blue channels) Random (3 wheels perform pseudo-random color chase F Rate set by Red channel) Blink-Indexed (Blink Mode is defined using Indexed wheel F operation) MSpeed Controlled (see above for function descriptions) Continuous F Indexed F Pure Mix A0-AF Spin B0-BF Cycle C0-CF Color Scan D0-DF Random E0-EF Blink-Indexed F0-FF 4 Red (-Cyan) Open Color 1 (open white position) A Color 2 (open white position)

3 4 Red (-Cyan) 5 Green (-Magenta) Red 0% F Red Full FF Indexed Mode Open F Color 1 (open white position) F Color 2 (open white position) F Red Low F Red Med Low F Red Medium AF Red Med High B0-CF Red Full D0-EF Pure Mix Mode Red 0% Red Full FF Spin Mode Color Scan Mode Scanning (slow to fast) FF Cycle & Random Modes Slow Rate Fast Rate FF Open Color 1 (open white position) A Color 2 (open white position) Green 0% F Green Full FF Indexed Mode Open F Color 1 (open white position) F Color 2 (open white position) F Green Low F Green Med Low F Green Medium AF Green Med High B0-CF Green Full D0-EF Pure Mix Mode Green 0% Green Full FF Spin Mode

4 5 Green (-Magenta) 6 Blue (-Yellow) 7 Effects (HX Model) Effects (FX Model) Color Scan Mode Scanning (slow to fast) FF Open UV A Color 2 (open white position) Blue 0% F Blue Full FF Indexed Mode Open F UV F Color 2 (open white position) F Blue Low F Blue Med Low F Blue Medium AF Blue Med High B0-CF Blue Full D0-EF Pure Mix Mode Blue 0% Blue Full FF Spin Mode Color Scan Mode Scanning (slow to fast) FF Twinkle Scan (fast to slow) BB Scan Stop BC-C3 Color Scan (slow to fast) C4-FF

5 7 8 9 *Note: Iris (HX-i Model) (Note: Snap instantly opens or closes at full speed. Ramp opens or closes at specified speeds.) MSpeed (see Table Table A- 2 on page A-2) Control (Note: The Shutter channel must be set to 0 to access Control channel settings.) Close Variable Iris F Open Periodic Strobe (Variable) Random Strobe (Variable) A7 Ramp Open/Snap Shut (Variable) A8-B7 Snap Open/Ramp Shut (Variable) B8-C7 Ramp Open/Ramp Shut (Variable) C8-D7 Random Ramp Open/Snap Shut (Variable) D8-E7 Random Snap Open/Ramp Shut (Variable) E8-F7 Open F8-FF Disable Longest (252.7 sec.) Shortest (0.15 sec.) FF Safe (disables all Control settings) Display Off C Display Dim E-26 Display Bright Home C-44 Lamp On Lamp Off A-62 Shutdown* Fixture shutdown allows you to remotely deactivate the fixture. When a fixture is shut down, the lamp is extinguished, power to the motors is disabled, and the LED display shows SHUT OFF. If a fixture is in shutdown mode, you must home the fixture to bring it back into operation.

6