July 2010 Price List with Product Specifications

Transcription

1 Millenium Consoles Distribution Amplifiers Telephone Hybrids Clock & Timing Systems July 2010 Price List with Product Specifications 601 Heron Drive Logan Township, NJ ph: fax:

2 millenium Analog consoles Part # Description Analog Consoles RS-6A5P RS-6ARJ RS-12A5P RS-12ARJ RS-18A5P RS-18ARJ RS-24A5P RS-24ARJ 6 Channel Analog Console with 5 Pin I/O connectors 6 Channel Analog Console with RJ-45 I/O connectors 12 Channel Analog Console with 5 Pin I/O connectors 12 Channel Analog Console with RJ-45 I/O connectors 18 Channel Analog Console with 5 Pin I/O connectors 18 Channel Analog Console with RJ-45 I/O connectors 24 Channel Analog Console with 5 Pin I/O connectors 24 Channel Analog Console with RJ-45 I/O connectors CONSOLE-KITSM COPY-6A For RS-6A 6 Channel Analog Console Small Console Kit Copy Stand CONSOLE-KITMD COPY-12A For RS-12A 12 Channel Analog Console Medium Console Kit Copy Stand CONSOLE-KITLG COPY-18A For RS-18A 18 Channel Analog Console Large Console Kit Copy Stand COPY-24A For RS-24A 24 Channel Analog Console Copy Stand PS-CONSOLE PS-CONSOLEHS Power Supply for all Consoles Redundant Power Supply for all Consoles HARNESSES Call for pricing and availability Analog system options LOGIC REMOTE ROUTER INTERCOM SPEAKER COMBINER DAMIXER FOURMIX-KIT SIXMIX-IN P&G 4PDT SPDT n/a Selector Logic Card - Adds logic to front panel selector Enhanced Interface Card - On/Off relay closure & opto-isolated input control Four Source Switcher Card - 1x4 stereo router Intercom Kit - Supports up to 4 stations Intercom Speaker - 2-way speaker with call button Combine 2 analog power supplies for hot-standby operation 4 inputs to any of 8 outputs Four Output Mix-Minus Kit - Generates 4 mix-minuses from 6 input channels Six Input Mix-Minus Board - Adds 6 additional channels to the above Penny & Giles Fader Option (per channel) Accessory Relay - Mechanical type (4PDT) Accessory Relay - Electronic type (SPDT) Colored Fader Knobs - Blue, White Red, Grey

3 Millenium Analog Console (Model RS-18A shown) Features: Full metering with programmable LED peak indicators 8 position switcher for external devices 3 output buses from every channel Complete monitoring section Cue logic is user programmable to function in several modes Channel on/off keypad switches are LED illuminated Easiest to wire and service inthe industry The RS Series Consoles have been known for their superb value since we introduced them 15 years ago, and we ve sold thousands of them. Today, Radio Systems Millenium Series carry on this tradition with enhanced capabilities and dramatic new styling. They offer a dazzling combination of superior specifications, user flexibility, and a wide range of features for surprisingly low prices! Each channel on every console provides 3 output buses, which can be selected simultaneously for simulcast and mix-minus applications. The channel on/off keypad switches control channel audio as well as all logic and control states. An accurate time-of-day clock and event timer (which also slaves to the Radio Systems CT-2002 Master Clock System) is included in every console. The 8-position switcher is a standard console feature which can be be utilized to remotely control any external device or as the controls for the optional four source audio switcher or intercom selector card. Full metering with programmable LED peak indicators is provided on every model as well. Specifications: Models Available: RS-6a: 6 channel RS-12a: 12 channel RS-18a: 18 channel RS-24a: 24 channel Audio Inputs: Type: differentially balanced instrumentation amplifiers with gain set jumpers and selectable input attenuators Level: jumper selectable gain settings to accommodate nominal input levels from -60 dbm to +10 dbm. Maximum input level: +22 dbm Impedance: 20K ohms or jumper selected Headroom: 22 dbm at any level Line Outputs: Type: actively balanced Level: adjustable 0 dbm to +10 dbm, maximum output +22 dbm Impedance: 100 ohms Distortion:.008% at nominal operating level, 20 Hz to 20 khz, Pgm, Aud and Mono outputs signal to noise: 88 db (or better) below +4 dbm with 0 dbv input level, 20 khz bandwidth, 600 ohm source impedance (line to line) 74 db (or better) below +4 dbm output with -50 dbv input level, 20 khz bandwidth, 150 ohm source impedance (mic to line) Frequency response: +/- 0.2 db 20 Hz to 20 khz Monitor Sends: Level: 1 volt rms nominal, 10 volts rms maximum, balanced Headphone Output: Level: 1 volt rms nominal, 10 volts rms maximum into 600 ohm headphone Distortion:.05% typical,.1% maximum Impedance: 50 ohms to front panel jack, 330 ohms to prefader (external amp) output Cue Output: 2 watts rms into 8 ohm speaker Dimensions: All consoles are 27 inches deep and 9 inches tall 6 channel: inches long 12 channel: inches long 18 channel: inches long 24 channel: inches long Available Accessories: Copy stand StudioHub+ Harness Source cables - specify length and type Spare power supply Additional clock/timer (RS-18A and RS-24A models only) Additional meter (RS-18A and RS-24A models only) Auxiliary relay Available Options: Selector logic card Enhanced remote interface card Intercom card Intercom speaker Four source switcher card DA card Dual mix-minus board Four output mix-minus boards IFB switcher Colored fader knobs Warranty: 2 years parts and service Specifications subject to change without notice

4 Millenium Digital Consoles Part # Description Digital Consoles RS-6D5P RS-6DRJ RS-12D5P RS-12DRJ RS-18D5P RS-18DRJ 6 Channel Digital Console with 5 Pin I/O connectors 6 Channel Digital Console with RJ-45 I/O connectors 12 Channel Digital Console with 5 Pin I/O connectors 12 Channel Digital Console with RJ-45 I/O connectors 18 Channel Digital Console with 5 Pin I/O connectors 18 Channel Digital Console with RJ-45 I/O connectors Digital Console ACCESSORIES CONSOLE-KITSM COPY-6D For RS-6D 6 Channel Digital Console Pre-wiring kit of StudiHub+ Patch Cables and Adapters Copy Stand CONSOLE-KITMD COPY-12D For RS-12D 12 Channel Digital Console Pre-wiring kit of StudiHub+ Patch Cables and Adapters Copy Stand CONSOLE-KITLG COPY-18D For RS-18D 18 Channel Digital Console Pre-wiring kit of StudiHub+ Patch Cables and Adapters Copy Stand PS-CONSOLE PS-CONSOLEHS Power Supply for all Consoles Redundant Power Supply for all Consoles Digital system options REMOTE ROUTER INTERCOM SPEAKER DAMIXER P&G 4PDT SPDT n/a Enhanced Interface Card - On/Off relay closure & opto-isolated input control Four Source Switcher Card - 1 x 4 stereo router Intercom Kit - supports up to 4 stations Intercom Speaker - 2-way speaker with call button 4 inputs to any of 8 outputs Penny & Giles Fader Option (per channel) Accessory Relay - Mechanical Type (4PDT) Accessory Relay - Electronic Type (SPDT) Colored Fader Knobs - Blue, White, Red, Grey

5 Millenium Digital Console (Model RS-18D shown) Features: Analog or Digital capable on every channel 32 bit resolution Sample rate conversion on every input 10 extra auxiliary output buses Up to 10 fully programmable mix-minus outputs Serial RS-232 interface Sleek new front-panel styling PC connect bus routing software included Simultaneous analog or digital outputs of every bus The tradition of the Millenium Console continues with a complete digital transformation. The Millenium Digital is now 100% AES/EBU capable on every input and output. In addition, performance has been enhanced with 10 fully programmable mix-minus outputs and a serial interface to third party equipment. Millenium Digital Consoles are available in 6, 12 and 18 channel frame sizes, appropriate for any-size application. All consoles offer identical channel features, monitor stages and available option card complements. Optional I/O connectors are available for all input and output circuit boards with easy-towire 5-pin balanced removable screw terminal connectors or with StudioHub+ standard RJ-45 connectors. Specifications: Measurements are made with 600 ohm loads connected to the analog outputs. 0 dbu equals volts RMS independent of load impedance, 0 dbm equals volts into a 600 ohm load. Reference Level: +4dBu equals -20 dbfs. FSD equals Full Scale Digital equals +24 dbu Analog Line Inputs: Input Impedance: 40 k ohms, instrumentation amplifier balanced Input Level Range: jumper selectable nominal input level of -16 dbu, -6dBu or +4 dbu Input Level Trim: software trim (digital gain adjust) +/-12.5 db. Input Headroom: 20 db above nominal input Analog Monitor Inputs: Input Impedance: 10 k ohms minimum, differentially balanced Input Level Range: Adjustable +4 dbu nominal, -10 dbu minimum Input Headroom: 20 db above nominal input Microphone Preamplifiers: Input Impedance: 10 k ohms Source Impedance: 150 ohms Input Level Range: Selectable in 5 db steps, -62 dbu to - 22dBu Equivalent Input Noise: -128 dbu, 150 ohm source, 20 khz measurement bandwidth Input Headroom: 20 db above nominal input Analog Outputs Output Source Impedance: Utility Buses <3 ohms balanced, all others 90 ohms. Output Load Impedance: 600 ohms minimum Nominal Output Level: +4 dbu Maximum Output Level: +24 db Digital Inputs: Signal Format: AES-3, S/PDIF Signal Compliance: 24 bit Input Sample Rate: 32 khz - 96 khz, sample rate conversion is provided for all digital inputs Input Level: -20 dbfs nominal Input Level Trim: software trim (digital gain adjust) +/-12.5 db. Input Headroom: 20 db above nominal input Digital Outputs: Signal Format: AES-3 Signal Compliance: 24 bit Output Sample Rate: 48 khz Digital Reference: Crystal (internal) or external AES-3 input at 48 khz 100 ppm Internal Sample Rate: 48 khz Processing Resolution: 32 bit floating point DSP Conversions: A/D 24-bit, Delta-Sigma, 256x oversampling; D/A 24-bit, Delta-Sigma, 256x oversampling Latency: <1.0 ms, analog in to analog out Frequency Response Line Input to Program or Utility Output: +0 db/-0.5 db, 20 Hz to 20 khz Microphone Input to Program or Utility Output: +0dB/-.5dB, 20 Hz to 20 khz Dynamic Range Analog Input to Analog Output: 106 db referenced to FSD, 22 khz measurement bandwidth, 109 db A weighted Analog Input to Digital Output: 109 db referenced to FSD, 22 khz measurement bandwidth, 112 db A weighted Digital Input to Analog Output: 109 db referenced to FSD, 22 khz measurement bandwidth, 112 db A weighted Digital Input to Digital Output: 123 db referenced to FSD, 22 khz measurement bandwidth, 126 db A weighted Total Harmonic Distortion + Noise Analog Input to Analog Output: <0.008%, 20 Hz to 20 khz, +23 dbu input, +23 dbu output, 22 khz measurement bandwidth Analog Input to Digital Output: <0.004%, 20 Hz to 20 khz, +23 dbu input, +23 dbu output, 22 khz measurement bandwidth Digital Input to Digital Output: <0.0005%, 20 Hz to 20 khz, -1 dbfs input, -1 dbfs output, 22 khz measurement bandwidth Digital Input to Analog Output: <0.004%, 20 Hz to 20 khz, -1 dbfs input, +23 dbu output, 22 khz measurement bandwidth Isolation Program-to-Program or Program-to-Utility: >88 db, 20 Hz to 20 khz A Input to B Input, B Input to A Input, >100 db Stereo Separation Analog Program Outputs: >88 db, 20 Hz to 20 khz Warranty Warranty is two years from date of receipt. All factory nonwarranty service is guaranteed for 90 days. For full warranty information, refer to the product manual. Technical assistance is available at all times at no charge by telephone or written correspondence. Items to be returned for repair must include a Return Authorization number obtained from Radio Systems. *Specifications are subject to change without notice.

6 millenium NETWORK consoles Part # Digital Consoles Description RS-6DNET RS-12DNET RS-18DNET 6 Channel Digital Console with 6 channels of IP audio 12 Channel Digital Console with 6 channels of IP audio 18 Channel Digital Console with 6 channels of IP audio NETWORK Console ACCESSORIES COPY-6D CONSOLE-KITSM COPY-12D CONSOLE-KITMD COPY-18D CONSOLE-KITLG PS-NET PS-NETHS For RSD-6D 6 Channel Network Console Copy Stand Pre-wiring kit of StudiHub+ Patch Cables and Adapters For RSD-12D 12 Channel Network Console Copy Stand Pre-wiring kit of StudiHub+ Patch Cables and Adapters For RSD-18D 18 Channel Network Console Copy Stand Pre-wiring kit of StudiHub+ Patch Cables and Adapters For All Network Consoles Power Supply for all Livewire Consoles Redundant Livewire Console Power Supply NETWORK system options REMOTE ROUTER INTERCOM SPEAKER DAMIXER P&G 4PDT SPDT n/a Enhanced Interface Card - On/Off relay closure and opto-isolated input control Four Source Switcher Card - 1 x 4 stereo router Intercom Kit - supports up to 4 stations Intercom Speaker - 2-way speaker with call button 4 inputs to any of 8 outputs Penny & Giles Fader Option (per channel) Accessory Relay - Mechanical Type (4PDT) Accessory Relay - Electronic Type (SPDT) Colored Fader Knobs - Blue, White, Red, Grey Axia Nodes & Software Applications Axia Analog Line Node Axia AES-EBU Digital Audio Node Axia Microphone Node Axia GPIO Node Axia Router Select Node Axia iprofiler Automated Program Archiving PathfinderPC Router Control Software Axia IP-Audio Driver for Windows - 1 input, 1 output Axia IP-Audio Driver for Windows - 16 inputs, 16 outputs Axia iprobe Network Management Software Axia iplay Network Stream Player for Windows For additional replacement parts, see preceding section for the Millenium Digital Console

7 Millenium Network Console (Model RS-18DNET shown) Features: Livewire compatible Add Livewire nodes and software to expand to a full network system 6 or 12 channels of local audio input with A/B switching Internal mix engine for stand alone operation Internal Axia GPI for remote control operation Select any Axia input on any LCD above the 6 Axia faders 8 selectable preset scenes of Axia configurations Millenium consoles featuring Livewire begin a tradition of shared standards and plugand-play compatibility for the broadcast industry. Radio Systems Livewire consoles offer both stand-alone functionality and Livewire IP-Audio network connectivity. And because it s a STANDARD - Millenium consoles now also communicate with any Axia device or any Livewire-enabled product from a growing list of manufacturers. Local channels feature two inputs each of stereo analog inputs with mic thru line-level sensitivity. Digital inputs are AES/EBU or S/PDIF with sample rate conversion. Livewire channels feature a rotary encoder and LCD two-line read-out for the display and selection of any system-wide Livewire source. Outputs include two stereo and 10 fully programmable mix-minus buses. All buses also create Livewire streams accessible throughout the Livewire network. With Millenium Livewire consoles you can input local studio audio AND share audio between consoles or playback iplay equipped digital delivery systems - with no additional hardware! For remote analog or digital I/O add any number of Axia Livewire nodes. Finally, use any Windows PC to run iplay or PathfinderPC software for system configuration or Windows Media local audio playback.* *Qualified Ethernet Switch requred for larger system configurations Network Specifications (Local analog and digital input and output specifications are identical to digital console specifications) Digital Audio Inputs and Outputs Reference Level: +4 dbu (-20 db FSD) Impedance: 110 Ohm, balanced (XLR) Signal Format: AES-3 (AES/EBU) AES-3 Input Compliance: 24-bit with selectable sample rate conversion, 32 khz to 96kHz input sample rate capable. AES-3 Output Compliance: 24-bit Digital Reference: Internal (network timebase) or external reference 48 khz, +/- 2 ppm Internal Sampling Rate: 48 khz Output Sample Rate: 44.1 khz or 48 khz A/D Conversions: 24-bit, Delta-Sigma, 256x oversampling D/A Conversions: 24-bit, Delta-Sigma, 256x oversampling Latency <3 ms, mic in to monitor out, including network and processor loop Livewire is a registered trademark of TLS Corporation

8 Distribution amplifiers DA 4x4b Available with rear panel Euro-style removable 5-pin barrier strips or StudioHub+ ready RJ-45 connectors Features: Barrier Strip Version - model DA 4x4b Versatile configurations quad, stereo or mono Front panel individual output levels Internal torroidal transformer Super-low noise and distortion specifications Individual rear panel removable I/O barrier strip connectors or StudioHub+ RJ /220 volt - CE certified Front panel audio presence and overload LED indicators Also available: DA-2x4b with stereo and mono configurations StudioHub+ Version - model DA 2x8 Radio Systems DA-4x4b may be the best DA ever made. We ve lowered the noise to a whisper at 102 db below +4 dbm out with an internal toroidal transformer that dramatically reduces internal electrical interference fields. Distortion in the DA-4x4b is so low that it is hard to measure as a result of low noise op-amps and a careful design of the output amplifiers. The unit has 4 isolated sections which can be easily wired and configured on a stereo 2x8, quad 4x4, or mono 1x1 DA. Each section features its own input LED and is an overload indicator and each output has its own level set, front panel attenuator. Specifications: DA-4x4b Channels 4 inputs x 4 outputs (DA-4x4a) 2 inputs x 4 outputs (DA-2x4a) Front Panel Indicators Power, audio level illuminates at -24 dbm (one per input channel), peak level illuminates at + 24 dbm (one per input channel) Input Impedance: 40K ohms, balanced and bridging Input Gain: 0 to +36 db (16 db, 26 db, 36 db jumper selectable) Output Impedance: 60 ohms, balanced Maximum Output Level: +25 dbm (into 600 ohm load) Frequency Response: +0/-.1 db 20 Hz to 20 khz Distortion: (thd + n):.002% 20 Hz to 20 khz (any output level into 600 ohm load) Distortion: (SMPTE imd):.003% (any output level into 600 ohm load) Distortion: (dim).002% (into 600 ohm load) Noise: 102 db below +4 dbm (full bandwidth into 600 ohm load) Output Channel Isolation (crosstalk): -105 db (full bandwidth) Dynamic Range: 123 db Headroom: 21 db above +4 dbm output (into 600 ohm load) Common Mode Rejection: -50 db (full bandwidth) Dimensions: 19 inch (EIA rack mount) wide x 1.75 inches (1ru) high x 7.75 inches deep (with connectors) Shipping Weight: 8 pounds Distribution amplifiers DA-4x4B DA-2x4B DA-2x8SH MJ-DDA DDA-1x4SH DDA-1x8SH Model DA 4x4b Model DA 2x4b Model DA 2x8 - with StudioHub+ RJ-45 connectors MatchJack Digital Distribution Amplifier SH+ 4 Channel Digital Distribution Amplifier SH+ 8 Channel Digital Distribution Amplifier

9 Telephone hybrid Radio Systems DI-2000 Telephone Hybrid Features: Dual line Hybrid functions as two separate hybrids or conference system Full automated console remote control Automatic Digital Nulling Producer and screener phone support Auto-answer feature Console to-caller cueing Full line monitoring for auto call drop and auto-nulling Internal mix-minus generation Acoustic room echo cancellation Record outputs Radio Systems digital phone hybrids provide everything you demand from a broadcast phone interface. Just a push of a dedicated front panel button answers calls, puts callers on hold, on-the-air, or in conference mode. Digital line nulling provides excellent separation and audio qualtiy, and microprocessor controlled switching circuitry makes the DI-1000/DI-2000 the most featured, best sounding, and easiest to use hybrid you ll ever own. The DI-2000 is ideal for conference calls, with several optional and programmable modes for mixing caller outputs and cue input buses. The unit also creates an internal inter-caller talk path, eliminating the need to supply a second mix-minus output from the console. The DI-2000 can also be programmed to operate as two separate single-line units. Specifications: Audio Inputs Impedance: 10K ohm, active balanced Maximum Input Level: +21 dbm Nominal Input Level: +4 dbm Connectors: 1/4 TRS balanced phone connectors Mix-Minus Input: provides audio to caller when on air Cue Input: provides audio to caller when in answer/cue Music on Hold Input: provides audio to caller when on hold Audio Outputs Impedance: 60 ohms, active balanced Maximum Output Level: +14 dbm Nominal Output Level: +4 dbm Connectors: 1/4 TRS balanced phone connectors Record Output: mix of caller and host audio Cue Output: caller audio when in answer/cue Speaker Level: cue channel Main Output: caller audio when on air General Telco Line Inputs - 2 tip/ring standard (POTS) line inputs - ring voltage detect - off-hook line detect (for aux phone) - line drop detect (for auto disconnect) - RJ-11 (4-wire) connector Remote Control Lines Answer / cue switch control Hold switch control Air switch control Drop switch control Answer / cue lamp Hold switch lamp Air switch lamp Line 1 & 2 seize relay (C form) Console Logic Remote Lines Off switch control (answer, cue, hold, drop) On switch control (air, cue) Off lamp (ring flash, hold flash) Distortion: 1% THD at 1 khz Frequency Response: Hz +/- 1 db Noise: 65 db referenced to 0 dbm phone level Transhybrid Loss: 40 db minimum Power: 115/230 V, 50/60 Hz, switchable Warranty: 1 year parts and service Specifications subject to change without notice Telephone Hybrids DI-1000 DI-2000 Model DI-1000 Model DI-2000

10 clocks & timing systems Features: Simultaneous clock/up-timer/downtimer on all models All units function as a remote timer slave display High Intensity.56, 2.3 and 4 LED displays Thin, Desktop, Wall and Rack mount models Reliable, RF-immune RS-422 serial data interface GPS, SMPTE & OCXO reference options Local & parallel remote control I/R remote control included with Desktop, 2 Inch and 4 Inch models for down timing and special programming of slave models Thin Display Only 1 1/4 deep for surface mounting Simultaneous clock/up timer. Receives, displays and sends Radio Systems CT- compatible serial time mode. Time-of-Day clock functions independently or as a master when remote drive signal is available. Timer displays may be set to display remote (master) timer or function independently. Top-of-hour reset input. IR remote (optional - must be ordered separately) provides access to the following features: down timer, 12/24 clock select, RSI or SMPTE serial time code input, time of day offset, four time of day compares with wired remote output, top-of-hour-reset offset, remote timer display. Desktop Display 1/2 high LED display in desktop cabinet Simultaneous clock/up timer. Receives, displays and sends Radio Systems CT- compatible serial time mode. Time-of-Day clock functions independently or as a master when remote drive signal is available. Timer displays may be set to display remote (master) timer or function independently. Top-of-hour reset input. IR remote (included) provides access to the following features: down timer, 12/24 clock select, RSI or SMPTE serial time code input, time of day offset, four time of day compares with wired remote output, top-of-hour-reset offset, remote timer display. 2 and 4 Inch Large Displays 2 and 4 high LED display for wall or rack mounting (2 high unit only) Simultaneous clock/up timer. Receives, displays and sends Radio Systems CTcompatible serial time mode. Time-of-Day clock functions independently or as a master when remote drive signal is available. Timer displays may be set to display remote (master) timer or function independently. Top-of-hour reset input. IR remote (included) provides access to the following features: down timer, 12/24 clock select, RSI or SMPTE serial time code input, time of day offset, four time of day compares with wired remote output, top-of-hour-reset offset, remote timer display. GPS Synchronization Option GPS Antenna in weatherproof mount available for desktop, 2 & 4 Displays CT2002 CLOCKS and TIMERS Part Number Model CT-THIN CT-2002 Thin CT-DESK CT-2002 Desktop CT-DESKGPS CT-2002 Desktop w/gps Antenna CT-2INCH CT-2002 Large 2 CT-2INCHGPS CT-2002 Large w/gps Antenna CT-4INCH CT-2002 Large 4 CT-IR I/R Remote CT-RACKSM Thin/Desktop Rack Mount CT-RACKLG Large 2 Rack Mount CT-SYNC PC Computer Sync Kit - generate or read RS serial time code to or from a PC GPS-SYNC GPS Computer Sync Kit - generate or read GPS time code to a PC CT-150CABLE 150 GPS CAT-5 Extender Cable with female RJ-45 biscuit terminations CT-250CABLE 250 GPS CAT-5 Extender Cable with RS-232 to RS-485 Converters for > 250 cable runs

11 clocks & timing systems CT-2002 Thin Display CT-2002 Large 2 Display CT-2002 Remote Control CT-2002 Large 4 Display CT-2002 Desktop.5 Display GPS Antenna Specifications: Time Base Thin, Desktop and 2 Inch and 4 Inch: Crystal oscillator with frequency trim provided. Power VAC +/- 10%, 60/50 Hz (external wall wart supply included. GPS Desktop and GPS 2 Inch will maintain time of day for 10 hours during power interruption with internal 9V battery (not included). CT-DESK RJ-45 Connection Serial Time Code In Serial Time Code Out Terminal Strip RJ-45 SHIELD TO GND Serial Time Code In + Serial Time Code In Ground Serial Time Code Out Serial Time Code Out + Ground Start Switch Stop Switch Reset Switch Mode Switch Ground Time Closure 1 Time Closure 2 Time Closure 3 Time Closure 4 Ground Down Time Closure at 0 Top-of-Hour Reset Input Dimensions Thin Displays - 7 Wide x 2.5 High x 1.25 Deep Desktop Displays - 7 Wide x 2.5 High x 4.5 Deep 2 Displays Wide x 5.25 High x 3.00 Deep 4 Displays Wide x 7.00 Highx 3.00 Deep Options CT-DESKGPS RJ-45 Connection GPS Antenna DIP Switches Time Zone Offset Terminal Strip Serial Time Code Out + Serial Time Code Out Ground Start Switch Stop Switch Reset Switch Mode Switch Ground 1 Hz Out Ahead Back DC to Clocks 10 Hz to Clocks Ground Common Top-of-Hour Output - N.O. output Rack Mounts GPS Extender Cables (increases cable length from antenna up to 250 ) Windows Computer Sync Software for GPS units. Windows only. Warranty One year parts and service. CT-2INCH & CT-4INCH (2 inch shown) Serial Synchronizing Data 1- Serial Time Code In + 2- Serial Time Code In 3- Ground 4- Serial Time Code Out 5- Serial Time Code Out + Remote Control 6- Ground 7- Start Switch 8- Stop Switch 9- Reset Switch 10- Mode Switch Clock Triggers 11- Ground 12- Time Closure #1 13- Time Closure #2 14- Time Closure #3 15- Time Closure #4 Ancillary I/O 16- Ground 17- Down Time Closure at Top-of-Hour Input 19- Ground V DC

12 HUBS Source Gear Interconnection HUB16-DC HUB8-DC 16 Channel RJ-45 Hub with DC-Link 16 I/O channels with 2 RJ-45 s and 110 punch connectors. Adds DC-Link compatability with optional PS-EXTU. HUB16-DC Channel RJ-45 Hub with DC-Link Same as above - 1/2 Hub/single board/8 channel version HUB8-DC Break-Out Harnessing HUB36-DC 36 Channel mini-amp Hub with DC-Link 36 channels of audio break-out from mini-amp connectors to RJ-45 s. DC-Link compatible. Order factory wiring harness to connect various consoles/audio engines and digital audio workstations HUB36-DC HUB18-DC 18 Channel mini-amp Hub with DC-Link 18 channel version of HUB36-DC above and adds 110 punch connectors for each channel HUB18-DC HUB32 HUB24 32 Channel mini-amp Hub 32 channels of audio break-outs from rear mini-amp connectors to front panel RJ-45 s in a 1 RU mount. Internally programmable per channel for analog stereo, mono or AES/EBU HUB HUB12 24 Channel Loop-thru Hub 24 channels of 8-wire loop thru connectors in a 1 RU mount HUB Channel Break-Out-Box 8 output channels and 4 input channels of custom break out for 4000, 5000, & 6000 ASI series audio cards in a 1 RU mount. Front panel SCSI connectors. HUB ACTIVE HUBS Part numbers in red require DC power. DA6-DC Dual Stereo Analog Distribution Amplifier 2 stereo inputs to 12 stereo outputs. Individual level sets. DA12-DC Single Stereo Analog Distribution Amplifier Same as above - 1/2 Hub/single board/6 channel version. DA6-DC DA12-DC GPI 16 Control Hub 16 channels of GPI relay output or opto-input breakout on RJ-45 s. GPI GPI24 FOUR-STUDIOSW GPI 12/24 Control Hub GPI relay output or opto-input breakout; RJ-45 outputs, RJ-21 inputs. 12 Channel model GPI Channel model GPI Four Channel Studio Switcher Hub Stereo four channel switcher with arming logic. Supports two or four studio push button panels FOUR-STUDIOSW

13 TIE LINE HUBS AND PATCH PANELS MINI TIE LINES TIE LINES TIE24-4 RJ-21 to 24 (x2) 4-Wire RJ-45 s w/110 Punch Connectors 24 Channels of RJ-45 4-wire tie lines. Each channel has 2 RJ-45 s in parallel and a 110 punch connector. Requires 2 CAT-5 25 pair RJ-21 connectorized cables. TIE RJ-21 to 12 (x2) 4-Wire RJ-45 s w/110 Punch Connectors Same as above - 1/2 Hub/single board/12 channel version. Requires 1 CAT-5 25 pair RJ-21 connectorized cable. TIE TIE24-4DC RJ-21 to 24 (x2) 4-Wire RJ-45 s w/dc-link Same as TIE24-4 w/o 110 Connectors; adds DC-Link compatability. TIE24-4DC RJ-21 to 12 (x2) 4-Wire RJ-45 s w/dc-link Same as TIE12-4 w/o 110 Connectors; adds DC-Link compatability. TIE12-4DC TIE24-8 RJ-21 to 24 (x2) 8-Wire RJ-45 s w/110 Punch Connectors Eight wire version of TIE24-4. Requires 4 CAT-5 25 pair RJ-21 connectorized cables. TIE MINITIE24-4 MINITIE12-4 RJ-21 to 12 (x2) 8-Wire RJ-45 s w/110 Punch Connectors Same as above 1/2 Hub/single board/12 channel version. Requires 2 CAT-5 25 pair RJ-21 connectorized cables. TIE RJ-21 to 24 4-Wire RJ-45 s 24 Channels of RJ-45 4-wire tie lines on a 1 r.u. rack plate. Requires 2 CAT-5 25 pair RJ-21 connectorized cables. MINITIE RJ-21 to 12 4-Wire RJ-45 s 12 Channels of RJ-45 4-wire tie lines on a wall-mount plate. Requires 1 CAT-5 25 pair RJ-21 connectorized cables. MINITIE PATCH PANELS PATCH Channel Patch Panel 2 row x 24 RJ-45 jacks with front panel normalling switches. Requires six rear panel I/O adapters below: PATCH Four RJ-45 s for stereo analog connections PATCH-48A1 N/C Two RJ-45 s for AES/EBU connections PATCH-48A2 N/C Eight RJ-45 s for straight-thru connections PATCH-48A3 N/C Eight BNC Connectors for 50 Ohm connections PATCH-48A One Eight RJ-21 Connector (Only two required) PATCH-48A5 N/C Eight 110 Punchdown Connections PATCH-48A6 N/C RACK MOUNT DISTRIBUTION AMPLIFIERS WITH RJ-45 / STUDIOHUB+ CONNECTORS DA-1x8SH DDA 1x8 Digital Distribution Amplifier Eight output AES/EBU with SH+ RJ-45 connectors (1 RU) DDA-1x8SH DA-2x8SH DA 2x8 Analog Distribution Amplifier Eight stereo outputs with SH+ RJ-45 connectors (1 RU) DA-2x8SH

14 ACTIVE AND PASSIVE panels PANELS Active and passive panels that mount separately or as assemblies. Part numbers in red require DC power. See power supply options. SH-HP SH-1XLRF SH-MIC SH-1/4BAL SH-VU SH-2XLRF SH-MICPTT SH-LCDV Headphone Amp Stereo 1/2 Watt Amp SH-HP Mic Pre-Amp Mono female XLR connector SH-MIC Mic Pre-Amp w/push-to-talk button SH-MICPTT Mic Pre-Amp w/isolated switch SH-MICSW Dual Match Panel RCA stereo input & output balancing amplifiers SH-DUALMATCH Mixer Plate Stereo 3 channel mixer with mix-minus SH-MIXER Monitor Level Panel In-line level control SH-LEVEL Dual VU Meter Panel SH-VU Monitor Amp Panel 8 watt monitor amp w/speaker SH-AMPSPKR Monitor Amp Panel 8 watt monitor amp w/o Speaker SH-AMP LCD Display Panel LCD display & selector-vertical SH-LCDV SH-HP, SH-1XLRF and SH-3BUT w/sh-surf3 Mount SH-TALENT SH-HP and SH-1XLRF w/sh-surf2 Mount SH-GUEST Single XLR Female Panel One female XLR connector SH-1XLRF Dual XLR Female Adapter Mono/Stereo Panel SH-2XLRF Single XLR Male Panel One male XLR connector SH-1XLRM Dual XLR Male Adapter Mono/Stereo Panel SH-2XLRM Dual XLR Male-Female Panel SH-2XLRMF TRS 1/4 & Mini Panel Unbalanced in stereo SH-1/4UNBAL TRS 1/4 & Mini Panel Balanced dual mono SH-1/4BAL Push-Button Panel SH-1BUT Push-Button Panel SH-2BUT Push-Button Panel SH-3BUT Push-Button Panel with RJ-45 Remote Connector SH-1BUTRJ Push-Button Panel with RJ-45 Remote Connector SH-2BUTRJ Push-Button Panel with RJ-45 Remote Connector SH-3BUTRJ Source Switch Panel 4 Stereo sources to 1 stereo output SH-4SW Position Switcher 10 x 1 stereo audio switcher in a 1 RU mount SH-10POS SH-4SW SH-TALENT

15 MOUNTS AND POWER SUPPLIES MOUNTS FOR PANELS Rack-up any combination of active or passive StudioHub+ plates SH-WELL1 SH-WELL2 SH-WELL3 In Table Well Mounts Single SH-WELL Dual SH-WELL Triple SH-WELL Quad SH-WELL Blank Filler Panel SH-BLANK 8.00 SH-SURF1 SH-SURF2 SH-SURF3 In Table Surface Mounts Single SH-SURF Dual SH-SURF Triple SH-SURF Quad SH-SURF SH-RACK4 SH-RACK10 Rack Mounts 4 Position 1 RU SH-RACK Position 3 RU SH-RACK Table Mounts Consolette 4 Position Mount SH-CON Four Across Mount - Mounts to flat surface SH-FLAT Under Countertop Mount SH-MOON SH-CON SH-MOON SH-FLAT4 UNIVERSAL POWER SUPPLIES - 90 TO 245 VAC FOR WORLDWIDE USE Power Supplies to provide DC-Link power distribution to Hubs for active Panels and MatchJacks. Also use to power active hubs (DA s and Summing Amps) or use Wallwarts directly or with cables to power Panels and MatchJacks independently and separately. PS-EXTU 4Amp External Supply with 5 pin MTA Connector PS-CUBE 4 Ch Power Inserter PS-WW AC Wall Adaptor (order SH version with 3 pin MTA) (order CUBE version with 3 pin MTE) StudioHub+ External Power Supply PS-EXTU /- 15 v DC regulated 4 Amps: wall mountable. Universal input voltage from V Powers up to 50 active plates. AC Wall Adapter Power Supply +/- 15 volts, 400ma powers any active plate or separate Matchjack. PS-WWSH /- 15 volts, 400ma powers PS-CUBE. PS-WWCUBE Universal input voltage from V. Power Supply Cube Power Inserter PS-CUBE Adds DC-link power up to four CAT-5 cables routed through the PS-CUBE. Requires PS-EXT (up to 4 amps) or PS-WWCUBE (up to 400ma) power Power Supply Combiner Board PS-COMBINE Diode combines 2 PS-Ext supplys for redundant power. 2DC inputs x 1 combined output. LED status indicators. Mounts in lower half of standard hub chassis. Console PS-CUBE Cable 6ft Powers thte PS-CUBE from a Millenium Console Power Supply (6ft.) Console PS-CUBE Cable 1ft

16 ADAPTERS, DONGLES and MATCHJACKS ADAPTERS ADAPT-XLRF ADAPT-XLRM ADAPT-RCA ADAPT-TRS ADAPT-PUNCH Adapter XLR Female to RJ-45 ADAPT-XLRF Adapter XLR Male to RJ-45 ADAPT-XLRM Adapter 1/4 TRS to RJ-45 ADAPT-TRS Adapter RCA to RJ-45 ADAPT-RCA Adapter 1/8 to RJ-45 ADAPT-MINI Adapter Bare End to RJ-45 (8 leads) ADAPT-PIGTAIL Adapter RJ-45 MALE to pigtail (10ft. length) ADAPT-PUNCH Adapter Mini XLR Female to RJ-45 (TA3 for Content Depot) ADAPT-TA RJ45 Breakout Adapter to Screw Terminals ADAPT-BO DONGLES RJ-45 to D connector adapters. Available for all major manufacturers analog and digital products that utilize D I/O connectors (i.e. digital sound cards) Single Quad Dual Single Call Dual Call Quad Call Dual D to Quad Call Dual D to Dual Quad Call MATCHJACKS MatchJacks connect RJ-45 patch cables to various source equipment. Part numbers in red require DC power. See power supply section. MJ-IN MJ-OUT MJ-AD MJ-SPDIFIN Pre-Amplifier-Output (RCA consumer to balanced line level) MJ-OUT Pre-Amplifier-Input (balanced line level to consumer RCA) MJ-IN S/PDIF to AES/EBU Converter MJ-SPDIFOUT AES/EBU to S/PDIF Converter MJ-SPDIFIN A to D AES/EBU Converter (includes PS-WW) MJ-AD D to A AES/EBU Converter (includes PS-WW) MJ-DA AES/EBU Distribution Amp (4 Output, includes PS-WW) MJ-DDA Splitters and Attenuators ATTEN-10DB ADAPT-ST AES/EBU 2-Way Splitter SH-AESSPLIT Stereo T Splitter Adapter ADAPT-ST Stereo T Splitter Adapter (8 wire for DC Power) ADAPT-PWR Left/Right T Splitter Adapter ADAPT-L/R Left/Left T Splitter Adapter ADAPT-L/L In Line Attentuator (10dB attenuation) ATTEN-10DB In Line Attentuator (20dB attenuation) ATTEN-20DB 20.00

17 CAT-5 Patch Cords, 25 Pair Tie-Lines and Bulk Cable Various lengths of shielded RJ-45 patch cords and cable for all StudioHub+ applications CAT-5 Patch & Bulk Cable All StudioHub+ cabling is shielded and CAT-5 certified Various lengths and colors of shielded RJ-45 patch cords for all StudioHub+ connections RJ-45 Patch Cable - 1 Patch RJ-45 Patch Cable - 2 Patch RJ-45 Patch Cable - 3 Patch RJ-45 Patch Cable - 5 Patch RJ-45 Patch Cable - 7 Patch RJ-45 Patch Cable - 10 Patch RJ-45 Patch Cable - 15 Patch RJ-45 Patch Cable - 20 Patch RJ-45 Patch Cable - 25 Patch RJ-45 Patch Cable - 35 Patch RJ-45 Patch Cable - 50 Patch RJ-45 Patch Cable - 75 Patch RJ-45 Patch Cable Patch RJ-45 Patch Cable Patch RJ-45 Patch Cable Patch CAT-5 and CAT-2 CABLES CAT-5 25 Pair Tie Line cable with RJ-21X connectors on both ends RJ-21 Cable - Specify length RJ21TIE-xxx CALL CAT-3 25 Pair Remote Control cable with RJ-21X connectors on both ends RJ-21 Cable - Specify length RJ21RC-xxx CALL BULK CABLE BULK CAT-5 CABLES CAT-5 25 Pair Unshielded 500 Roll CAT CAT-5 4 Pair Shielded Solid Wire 1000 Roll White CAT5-1000WHT Red CAT5-1000RED Orange CAT5-1000ORG Green CAT5-1000GRN Dark Blue CAT5-1000DBL

18 PRODUCT PACKAGES Pre-Packaged Cable Bundles Discounted package of various lengths shielded RJ-45 patch cords for all StudioHub+ applications MiniPatch Cable Kit w/20 Patch Cables PATCH-KITMN each of 1, 2, 3, 20, 25 shielded patch cables, 3 each 5, 7, 10, 12, 15 shielded patch cables Small Patch Cable Kit w/35 Patch Cables PATCH-KITSM each of 1, 2, 3, 20, 25 shielded patch cables, 5 each 5, 7, 10, 12, 15 shielded patch cables Medium Patch Cable Kit w/55 Patch Cables PATCH-KITMD each of 1, 2, 3, 20, 25 shielded patch cables, 8 each 5, 7, 10, 12, 15 shielded patch cables Large Patch Cable Kit w/75 Patch Cables PATCH-KITLG each of 1, 2, 3, 20, 25 shielded patch cables, 10 each 5, 7, 10, 12, 15 shielded patch cables Pre-Packaged Adapter Bundles Discounted package of various adapters for all StudioHub+ applications Mini Adapter Kit w/20 Adapters ADAPT-KITMN each RJ-45 to: XLRF adapters, to XLRM adapters, 1/4 TRS and pigtail adapters. Small Adapter Kit w/40 Adapters ADAPT-KITSM each RJ-45 to: XLRF adapters, to XLRM adapters, 1/4 TRS and pigtail adapters. Medium Adapter Kit w/60 Adapters ADAPT-KITMD each RJ-45 to: XLRF adapters, to XLRM adapters, 1/4 TRS and pigtail adapters. Large Adapter Kit w/80 Adapters ADAPT-KITLG 1, each RJ-45 to: XLRF adapters, to XLRM adapters, 1/4 TRS and pigtail adapters. AXIA Node Kit w/16 Adapters and Patch Cords ADAPT-KITAX each RJ-45 to: XLRF adapters, to XLRM adapters, 16 each 7 shielded patch cables. Pre-Packaged Console Bundles Discounted package of various lengths shielded RJ-45 patch cords and adapters to install various consoles. Small Console Kit CONSOLE-KITSM each 7, 6 each 10, 6 each 12, 4 each 15 shielded patch cables 5 XLR female, 3 XLR male, 1 each 1/4 TRS, 1 pigtail adapters Medium Console Kit CONSOLE-KITMD each 7, 10 each 10, 8 each 12, 5 each 15 shielded patch cables 7 XLR female, 5 XLR male, 2 each 1/4 TRS, 2 pigtail adapters Large Console Kit CONSOLE-KITLG each 7, 12 each 10, 11 each 12, 7 each 15 shielded patch cables 10 XLR female, 6 XLR male, 3 each 1/4 TRS, 3 pigtail adapters

19 PRODUCT PACKAGES DISCOUNT POWERED GUEST Packages StudioHub Guest Packages include Guest Panels, MatchJack Amplifiers and Power Adapters. Priced lower than purchasing individual products. SH-GUEST StudioHub+ 2 Guest Accessory Package SH-2GUESTKIT Includes 2 SH-Guest Panels (includes 1 SURF-1, 1 SH-XLRM and 1 SH-HP), 1 Power Cube Inserter, 1 Power Cube Wall Wart, 2 MatchJack Output Amplifiers, 1 MatchJack Input Amplifier PS-CUBE PS-WWCUBE StudioHub+ 3 Guest Accessory Package SH-3GUESTKIT Includes 3 SH-Guest Panels (includes 1 SURF-1, 1 SH-XLRM and 1 SH-HP), 1 Power Cube Inserter, 1 Power Cube Wall Wart, 2 MatchJack Output Amplifiers, 1 MatchJack Input Amplifier SH-MJIN SH-MJOUT StudioHub+ 4 Guest Accessory Package SH-4GUESTKIT Includes 4 SH-Guest Panels (includes 1 SURF-1, 1 SH-XLRM and 1 SH-HP), 1 Power Cube Inserter, 1 Power Cube Wall Wart, 2 MatchJack Output Amplifiers, 1 MatchJack Input Amplifier HARNESS KITS Pre-made for your console including: Cabling for all console A+B inputs, and program and monitor outputs Note: Include modular console configurations with order. Standard harness cables length is 7 - special order lengths are available. Harness for 6-10 Channel Consoles Includes cables for up to 20 inputs, 2 outputs and 4 monitors, cable wire management hoops included CALL Harness for Channel Consoles Includes cables for up to 24 inputs, 4 outputs and 8 monitors, cable wire management hoops included CALL Harness for 18 Channel Consoles Includes cables for up to 36 inputs, 6 outputs and 12 monitors, cable wire management hoops included CALL 1, Harness for Channel Consoles Includes cables for up to 48 inputs, 8 outputs and 16 monitors, cable wire management hoops included CALL 1, Siemon Punch Block

20 ORDERING INFORMATION Warranty Warranty is two years for consoles, one year for all other products. All factory non-warranty service is guaranteed for 90 days. For full warranty information, refer to the product manual. Technical assistance is available during normal business hours at no charge by telephone or written correspondence. Items to be returned for repair must include a Return Authorization number obtained from Radio Systems. Shipping Prices are FOB Logan Township, NJ. Shipping charges are the responsibility of the buyer. The customer bears the risk of loss from the point of shipment. Upon request, Radio Systems will drop ship an order to a third party at no additional charge. Ordering Radio Systems will accept orders via mail, telephone, fax or from authorized dealers. However, in case of phone, fax or orders, we must receive the signed original marked Confirming. Power All Radio Systems products operate at 110v/220v, 60Hz/50Hz power. Certain products may require voltage selector switch to be enabled. Refer to product manual for details. Specifications Radio Systems reserves the right to make changes in specifications and/or pricing without notice. Whenever possible, however, we will make every effort to notify the dealer of the change(s). Shipping Weights and Measurements Product Dimensions (inches) Weight 6 Channel Console With Power Supply 40 x 34 x lbs. (dim wt.) 12 Channel Console 40 x 34 x lbs. (dim wt.) 12 Channel Console Power Supply 24 x 12 x lbs. 18 Channel Console 52 x 34 x lbs. (dim wt.) 18 Channel Console Power Supply 24 x 12 x lbs. 24 Channel Console 64 x 34 x lbs. (dim wt.) 24 Channel Console Power Supply 24 x 12 x lbs. DI x 13 x 3 10 lbs. DA 4x4b 23 x 13 x 3 8 lbs. CT-2002 Thin 7 x 2.5 x lbs. CT-2002 Desktop 7 x 2.5 x lbs. CT-2002 Large 20 x 9 x 8 7 lbs. CT Clock 28 x 18 x 6 15 lbs.