SINGLE-OUTLET WET- AND DRY-MAINTAINED
|
|
|
- Silas Poole
- 5 years ago
- Views:
Transcription
1 SINL-OUTLT WT- AND DRY-MAINTAIND UNDRFLOOR SYSTMS
2 XPLODD VIW SINL-OUTLT, ROUND WT- AND DRY-MAINTAIND UAA 22 UDA22 UDA45 UANT45 UDA45 UST45 1 UARM-3-1 UARM-2-1 UT 75 U R ODO NL ODO TL ODO N ODO T USKR UD190 1R PUK-WRK K 2
3 SYSTM OVRVIW, MANUALS FOR PLANNIN AND INSTALLATION SINL-OUTLT, ROUND WT-MAINTAIND Instructions for installation installation units for screed and hollow floors Single outlet ODO, wet maintenance floors Ø 122 Ø 122 Round single-outlet with protection frame made of aluminium with an outside diameter of 133, equipped with an isolated ground receptacle and a RJ45 data box or as revision opening. For installation in screed fl oor or false fl oor. Screed / false floor reate a fl oor opening in the screed or raised fl oor using a core cutter or through the use of hollow space fl oor box with shuttering unit. over lid Open lid by means of Allen screw counterclockwise. Remove tube Put the lid into the grooving of the tube receptacle and thus unscrew the tube receptacle. Attach the frame and insert the strain relief Protection frame have to seal accordingly when used in wet-maintained fl oors. Insert strain relief from below into the opening and secure the cable. Tighten the claws by means of crosshead screws. Tube insert ring single-outlet from closed to open state by swivelling the tube insert by 180. Insert the rubber sleeve for a dust-proof sealing. quipment Insert plug and lead cables through the cable outlet. Tightly screw together tube insert and tube lid. PUK-WRK K 3
4 SINL-OUTLT, ROUND DRY-MAINTAIND ODO T single outlet with bottom outlet, dry maintenance, round ODO TL single outlet, dry maintenance, round, empty min ODO T-S RAL ,40 85,60 AS ODO T RAL ,40 85,60 inclusive: 1 x UAA- 22 cover, blind 1 x UST45-W 1 socket, single 1 x UARM cover plate 1 x U-R device installation cup, round UWZ-TS40 torx key min ODO TL-S RAL ,20 33,40 AS ODO TL RAL ,20 33,40 U R device installation cup, round UT 75 device separation plate UARM-3-1 cover plate UARM-2-1 cover plate UWZ-TS40 torx key PUK-WRK K PUK-FLY-ODO-N TOPP U R Device installation cup, round U-R RAL ,05 6,70 AS UT 75 Device separation plate UARM-2-1 over plate for 2x UDA22 1 UARM-3-1 over plate for 3x UDA22 1 L 2 2 inclusive: 2 x UZ-R strain relief 2 x LS 2,9x32 tapping screw 1 2 UARM ,5 40,5 RAL ,03 1,95 AS UST45 1 socket, single UDA22 data systems installation device single 1 2 UARM ,5 63 RAL ,02 1,90 AS UT 75 device separation plate L UST45 1 socket, single UDA22 data systems installation device single UT RAL ,01 1,35 AS Irrtümer und technische Änderungen vorbehalten, Nachdruck sowie jegliche elektronische Vervielfältigung nur mit unserer schriftlichen enehmigung. Mit rscheinen dieser Drucksache verlieren alle vorhergehenden Unterlagen ihre ültigkeit. PUK-WRK K 6
5 SYSTM OVRVIW, MANUALS FOR PLANNIN AND INSTALLATION SINL-OUTLT, ROUND DRY-MAINTAIND Instructions for installation installation units for screed and hollow floors Single outlet ODO, dry maintenance floors Ø 122 Ø 122 Round single outlet with protection frame made of plastic, external diameter 113, equipped with one isolated ground receptacle or as inspection chamber. For installation into raised or hollow fl oors. Raised / hollow floors Provide a fl oor opening in the raised fl oor with a drill bit. able outlet lid Open cable outlet lid with a torx wrench counter clockwise, pull out to open. Assembly of receptacle In order to connect, disassemble the preconverted single outlet, insert cable and connect to receptacle. Then assemble cover plate, receptacle and device cup. Fasten strain relief and frame Insert the strain relieves from below and secure cable. Tighten claws with Phillips head screws. able outlet Place plug and insert cable outlet lid counter clockwise with bayonet locking device. quipment Lead the cable from an angular or straight plug through the cable outlet. PUK-WRK K 4
6 SINL-OUTLT, ROUND WT-MAINTAIND UD190 1R hollow space floor box single, round 1 2 L1 L2 UD R ,6 73,35 S UD R ,7 73,95 UD R ,8 74,55 USKR shuttering unit, round UN nail plug USK R shuttering unit round D USK 120R ,42 6,24 STY ODO N single outlet with bottom outlet, wet maintenance, round min ODO N ,74 298,00 AL inclusive: 1 x UT80-R-WD tube cable outlet 1 x UTD80-R-WD tube cover 1 x UDA22-AT6 8 data systems installation device single 1 x UST45-W 1 socket, single 1 x UT 75 device separation plate 1 x UARM cover plate 1 x U-R device installation cup, round 1 x UWZ-IS 8 allen key 2 x UM1-3 sleeve ODO NL single outlet, wet maintenance, round, empty min ODO NL ,48 243,00 AL U R device installation cup, round UT 75 device separation plate UARM-3-1 cover plate UARM-2-1 cover plate UM sleeve PUK-WRK K 5
www.mete-enerji.com.tr INDUSTIAL IEC PLUGS AND SOCKETS INDUSTIAL IEC PLUGS AND SOCKETS Position of the Earthing Contact acc. to IEC 60309-2 225/400-265/460 V~ 60 Hz (1) 3 P+N+ 3 P+ 2 P+ 120/208-144/250V~
Assembly Instructions
Assembly Instructions REP Series Environmentally - Sealed Rectangular Plastic Connectors Hypertac S.A. January 2014 Assembly Instructions REP Series January 2014 1 Table of Contents I. Introduction A.
Operation and Maintenance Guide Electric Needle Scalers
Operation and Maintenance Guide Electric Needle Scalers Models Covered Model Number ENS100V ENS200V Electric Needle Scaler, 110V-1ph Electric Needle Scaler, 220V-1ph Description IMPA Number 59 12 01 59
Medium Box for Cable Termination
FIST-MB2-T I N S T A L L A T I O N I N S T R U C T I O N Medium Box for Cable Termination Contents 1 Introduction 1.1 Product description. 2 General 2.1 Tools 2.2 Kit contents 3 Installation and pre assembling
FIST-MB2-S. FIST Medium Box for Cable Splicing Only. 4 Cable installation. 1 Introduction. Contents. 2 General. 5. Fiber routing to individual trays
FIST-MB2-S I N S T A L L A T I O N I N S T R U C T I O N FIST Medium Box for Cable Splicing Only Contents 1 Introduction 1.1 Product description 2 General 2.1 Tools 2.2 Kit contents 3 Installation and
Monolith Turntable P/N User's Manual
Monolith Turntable P/N 27749 User's Manual SAFETY WARNINGS AND GUIDELINES Please read this entire manual before using this device, paying extra attention to these safety warnings and guidelines. Please
Click & Go. LWL-NE4-Katalog. Click & Go Modular Solutions. Subject to technical changes! 1
Modular Solutions Subject to technical changes! 1 Since 1986, braun telecom has stood for continuity and competence in broadband communication and has become one of the leading suppliers of products and
KEL 24 Cable entry frames
24 Cable entry frames Split inserts Description Type Order No. Inserts KT PU small large The 24 matches exactly the cut-out dimensions of 24-pole standard industrial connectors. 24 42241 - The split insert
DREAMOC DIAMOND 4K - ASSEMBLY GUIDE VERSION ORIGINAL ASSEMBLY GUIDE
DREAMOC DIAMOND 4K - ASSEMBLY GUIDE VERSION 1.2 - ORIGINAL ASSEMBLY GUIDE It is important to read this assembly guide before using the Dreamoc Diamond, and to follow advices and instructions on safety,
1.2 EUREKA Series... from page c.14
.2 EUREKA Series................................................................................................. from page c.4 This latest generation of industrial plugs, connectors and socket outlets
FOSC 450 C6 and D6 Closures
FOSC 450 C6 and D6 Closures I N S T A L L A T I O N I N S T R U C T I O N Fiber Optic Splice Closure 1. General Product Information The FOSC 450 C6 and D6 fiber optic splice closures use compressed gel
WaterVue TV Installation & User Manual
WaterVue TV Installation & User Manual 19 Waterproof TV Dimensions of TV Front screen 486mm x 340mm x 3mm Mounting Plate 467mm x 324mm x 48mm 24 Waterproof TV Dimensions of TV Front screen 576mm x 395mm
Installation instructions Roxtec CF 16 EMC and Roxtec CF 16 O EMC
Safety information Roxtec recommends that all installations are performed without facility operation. Follow national regulations and installation codes. ny action affecting the routed service should be
Automatic Connector MHV Connectors MHV Introduction MHV series connectors Contents Polarized mating interfaces Anti-Rock mating interfaces
Automatic s 2004 Automatic. All rights reserved. pdf 1.0 3-18-04 Contents Specifications........................... 2 Straight Cable Plugs...................... 3 Right Angle Cable Plugs...................
Instruction manual. Midi Fiber Dome. Instruction manual
Midi Fiber Dome Instruction manual Product contents: - 1x Midi Fiber Dome - 1x Window Cut port seal - 1x sealing rubber (long) - 4x sealing rubber (short) - 4x stainless steel screw 4 x 25 T20-6x dummies
C Connectors. Automatic Connector. Introduction. Contents. C Interface Options. 631/ FAX 631/
utomatic onnector onnectors Introduction 2004 utomatic onnector. ll rights reserved. pdf 1.0.1 3-23-04 ontents Specifications........................... 2 Straight Plugs...................... 3 Right ngle
KVT Split cable glands
KVT Description Type Order Grommets Thread PU KVT is a circular split frame for quick and easy installation and sealing of cables with connectors or complete cable harnesses. 3 KVT 20** 34 24 M20. Polyamide
Product group 1. Product description. At a glance. Cable entry systems for entering pre-terminated cables
Product group 1 Cable entry systems for entering pre-terminated cables At a glance The patented cable entry system enables the user to enter, seal and provide strain relief for pre-terminated and standard
Fiber Optic Splice Closure GPJ Instruction Manual
Fiber Optic Splice Closure GPJ09-9401 Instruction Manual 1. Brief Introduction GPJ09-9401 type of Fiber Optic Splice Closure is a member in dome series, the main function is to provice direct pass, branch
Fiber Optic Splice Closure GPJ Instruction Manual. [Escribir texto]
![Fiber Optic Splice Closure GPJ Instruction Manual. [Escribir texto]](/thumbs/78/76992361.jpg "Fiber Optic Splice Closure GPJ Instruction Manual. [Escribir texto]")
Fiber Optic Splice Closure GPJ09-8205 Instruction Manual [Escribir texto] 0 Table of Contents 1. General Introduction 2 2. Specification 2 3. Structure 2 4. Installation instructions. 4 5. Operation procedure.
Amphenol. Circular. Connectors C 16-1 / C Circular Connectors. Amphenol-Tuchel Electronics
Amphenol C 6- / C 6- Circular Circular Connectors Connectors Amphenol-Tuchel Electronics General information We reserve the right to change the design due to improvement in quality, development or production
Technical Information Bulletin
June 4, 2001 #TIB0003 Units Affected: Model Serial Numbers Model Serial Numbers SVT-2PRO T2PDxxxxxxxxx SVTAV AXVDxxxxxxxxx ATLDxxxxxxxxx BJIDMAxxxxxxx SVT-2PROJ T2PJxxxxxxxxx SVTAVJ BAHJxxxxxxxxx ATLJxxxxxxxxx
imac Intel 20" EMC 2133 and 2210 LCD Backlights (CCFL) Replacement
imac Intel 20" EMC 2133 and 2210 LCD Backlights (CCFL) Replacement The CCFL back lights are replaceable. I have pulled mine apart and documented my method. '''NOTE''' This is not for the feint hearted!
KVT Split cable glands
KVT Split cable glands Description Type Order Inserts KT Thread PU No. small large Thread length KVT is a circular split frame for quick and easy installation of cables or complete cable harnesses. Polyamide
Instruction manual. KUZMA 4POINT 14 inch TONEARM Serial Number:
Instruction manual KUZMA 4POINT 14 inch TONEARM Serial Number:.. 2016-09 1 KUZMA LTD INSTRUCTION MANUAL FOR 4POINT 14 tonearm The 4POINT 14 tonearm is a very precisely engineered piece of equipment, however,
Grounding-type plugs and sockets K Product information
Product information Plugs and sockets for harsh conditions. SCHUO by MENNEES with the hammer symbol. Acc. to VDE 0105 part 115. Made of high-grade AMAPLAST. Acc. to VDE 0620 for harsh conditions. Application
2000 Series Weather Stations Analog Temperature / RH Sensor Upgrade Kit PRODUCT MANUAL KIT # 3613WDU
2000 Series Weather Stations Analog Temperature / RH Sensor Upgrade Kit PRODUCT MANUAL KIT # 3613WDU 1 The 3613WDU Analog Temperature / RH Sensor Upgrade Kit is used to upgrade Watchdog 2000 Series Weather
Optical Distribution Box 300 Installation Guide. Version : R0.0
Optical Distribution Box 300 Installation Guide Document No. : OD16-546-L-01 Version : R0.0 Date: 21-Mar-2018 IMPORTANT INSTRUCTIONS When using fiber optic equipment, basic precautions should always be
SECTION 4 TABLE OF CONTENTS
Contents Introduction LC, SC and ST Series...4-2 Markets and Applications...4-2 International Standard Documents Compliance...4-2 LC Series Features and Benefits...4-3 LC Standard... 4-4 to 4-5 LC for
2178-L/S Series Fiber Optic Splice Case with Gasket
2178-L/S Series Fiber Optic Splice Case with Gasket Instructions for: 2178-S Splice Case 2178-LS Splice Case 2178-LL Splice Case 2181-LS Cable Addition Kit May 1997 34-7041-9949-5-A 1 Table of Contents
SJOF-BS604B. Fiber Optic Splice Closure User Manual Rev.1
Fiber Optic Splice Closure 1. Introduction 1.1 General SAMJIN s SJOF-BS604B protects fiber optic splicing point in various installation conditions such as aerial, manholes, ducts, wall and direct buried
RCA PLUGS & JACKS Bulk Pkg (2) Bulk Pkg (2) Bulk Pkg (2) Bulk Pkg (2)
RCA PLUGS & JACKS 24-100-0 Bulk 24-100-2 Pkg (2) Metal body RCA plug. Maximum cable dia. 7.5mm 24-104-0 Bulk 24-104-2 Pkg (2) Metal plug with strain relief. Maximum cable dia. 4.5mm Use 84-156-1 tool for
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS PARTS REQUIRED Parts in the box Single monitor Dual monitor M2 M8 M/Flex + (package contents will depend on configuration ordered) Tools required for installation 6.0 mm Hex Key
Electric Motorized Projection Screen Spectrum Tab-Tension Series User s Guide
Electric Motorized Projection Screen Spectrum Tab-Tension Series User s Guide Important Safety Precautions Make sure to read this user s guide and follow the procedures below prior to screen operation.
DLMP Installation Instructions
DLMP Installation Instructions Tools Needed Posidrive No.3 Screwdriver Large Flat Head Screwdriver 2x 10mm Spanner 1x 13mm Spanner Ø8mm Drill Ø6mm Drill Kit Contents [ ] 1x Tube 2.5M long 17420 [ ] 2 x
INSTRUCTION MANUAL. H4 PV Cable Connector Series Dual Approval (UL+IEC/TUV)
H4 PV Cable Connector Series Dual Approval (UL+IEC/TUV) REVISION RECORD REV DESCRIPTION DATE A FIRST RELEASE July/28/2011 B IMPROVED LAYOUT Sep/6/2011 C UPDATE TORQUE Nov/3/2011 D UPDATE THE S&F REQUIREMENT
Control cabinet interface and cable entry systems
Modlink MPV Control cabinet interface The Modlink MPV control cabinet interface provides the connection from the control cabinet to the fieldbus environment (outside) in a simple way. Durable connection
PL Series. Plastic Push Pull Interconnects
PL Series Plastic Push Pull Interconnects We Connect When it matters most For more than a century, ITT Cannon has developed innovative interconnect solutions for the world s most critical applications.
ASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES
ASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES FOR 75 OHM AND 75 OHM HD COAXIAL CONTACTS AND MODULES Table of Contents SECTION 1 RECEIVER CONTACT ASSEMBLY INSTRUCTIONS SECTION 2 ITA CONTACT
BNC 75 Ohm RF-Connectors
BNC 75 Ohm RF-Connectors Table of Contents BNC 75 Ohm 1/2 Page Company Profile... 3 Product Description... 4 Technical Data... 5 Design Options... 6 Connectors Cable Plug... 8 Adaptor... 12 U-Link... 14
Stand Alone Serenity, Light, Sound, Rain Head
Installation Manual For Tutorials and Troubleshooting visit www.thermasol.com/solutions SASC-XX, SAST-XX, SASMR-XX, SAST-XX Stand Alone Serenity, Light, Sound, Rain Head OVER 55 YEARS OF STEAM SHOWER INNOVATION
LOW VOLTAGE DEVICES PLUGS & SOCKETS COMBINATION UNITS
LOW VOLTAGE DEVICES PLUGS & SOCKETS COMBINATION UNITS emobility Caravan & Boat In this new catalogue we are pleased to present our wide range of power connectors, built-in sockets and socket combinations.
OWNER'S MANUAL SIGNAL COMMANDER
OWNER'S MANUAL SIGNAL COMMANDER THIS MANUAL CONTAINS INSTRUCTIONS FOR: MOD 550 - INSTALLATION - OPERATION - TROUBLESHOOTING - EXPLODED PARTS DRAWING - WARRANTY AntennaTek, Inc. 425 S. Bowen, #4 Longmont,
COLORBOX - ILLUMINATED ASSESSMENT CABINETS VF0600, VF1200
COLORBOX - ILLUMINATED ASSESSMENT CABINETS VF0600, VF1200 1 SAFETY PRECAUTIONS Please read this manual before operating the product. After reading the manual, store it in a safe place for future reference.
Cable entry systems. perfect innovative smart. Cable entry systems
Cable entry systems perfect innovative smart Cable entry systems Control systems engineering Switch cabinet engineering Vehicle engineering Plant engineering Machine construction Electrical installation
S020 fluorescent tube luminary
S020 fluorescent tube luminary DESCRIPTION: Fluorescent lamps S020 are suitable above all for uniform lighting of bigger areas. Lamps from the range S020 are manufactured from extruded aluminium profile
TECHNICAL INFORMATION
OCTALUMINA 120: PARTS LIST AND TECHNICAL INFORMATION HIGH POWER LEDS INNER CORNER LABELED FRAME MOUNTED POWER SUPPLY UNIT EASY PLUG-IN CONNECTION BRACING TECHNIQUE CABLE OUTLET AT THE BOTTOM SYSTEM PACKAGING
MODELS USIX-024 AND USIX-120 INSTRUCTION SHEET FOR FEDERAL SIGNAL UNISTAT STATUS INDICATOR MODEL USIX
2562089B REV. B 110 Printed in U.S.A. MODELS USIX-024 AND USIX-120 INSTRUCTION SHEET FOR FEDERAL SIGNAL UNISTAT STATUS INDICATOR MODEL USIX Address all communications and shipments to: FEDERAL SIGNAL CORPORATION
DL-AR2 Technical Specifications Universal HDMI Adapter Ring Rev
DL-AR2 Technical Specifications Universal HDMI Adapter Ring Rev. 130814 The DL-AR2 Digital Adapter Keychain was developed to support the rising proliferation of mobile devices used in presentation systems.
3M Locator Plate N
M Locator Plate 44-107N Instructions for the assembly of.100 x.100 preassembled socket connectors 1.0 General The M Locator Plate 44-107N is designed to aid in the assembly of the preassembled socket connector
CONNECTING THE FUTURE 19" LINXS LIGHTWAVE INTEGRATED CROSS-CONNECT SYSTEM USER MANUAL
CONNECTING THE FUTURE 19" LINXS LIGHTWVE INTEGRTED CROSS-CONNECT SYSTEM USER MNUL 109003 Issue Rev 2 19" Lightwave Integrated Cross-Connect System (LINXS) User Manual Document Number 109003 Issue Rev 2
KEL 183 Cable entry frames
KEL 183 Cable entry frames Description Type Order.No. Inserts KT PU KT 183 KT large The new version of the split cable entry frame KEL 183 enables the user to route cables and tubes with a diameter up
Electric Motorized Projection Screen PowerMax Tension Series
Electric Motorized Projection Screen PowerMax Tension Series User s Guide Important Safety & Warning Precautions Make sure to read this user s guide and follow the procedures below. Caution: The screen
COMBINATION UNITS MARCH 2018
COMBINATION UNITS MARCH 2018 2 COMBINATION UNITS STATIONARY SOCKET OUTLET COMBINATIONS Variants 5 Dimensions 6 Wall-mounted Distributor Boxes (plastic) Series 45 8 Wall-mounted Distributor Boxes (plastic)
INSTRUCTIONS FOR USE Pro-Ject 1 Xpression Carbon
INSTRUCTIONS FOR USE Pro-Ject 1 Xpression Carbon 2 Pro-Ject 1 Xpression Carbon Controls, features and connections 1 Motor brackets with ORTOFON pads 2 Stepped drive pulley 3 Drive belt * 3a Hook * 4 Hub
Product Manual. Designed and Manufactured in the UK by Optikinetics
Product Manual Contents Product Overview... 1 Getting Started... Mounting the Projector... Inserting the Effect Wheel... Focussing the Image... Cleaning the Focussing Lens... 2 2 3 6 6 Operating the Projector...
OWNER'S MANUAL SIGNAL COMMANDER
OWNER'S MANUAL SIGNAL COMMANDER THIS MANUAL CONTAINS INSTRUCTIONS FOR: LPDA 200 - INSTALLATION - OPERATION - TROUBLESHOOTING - EXPLODED PARTS DRAWING - WARRANTY AntennaTek, Inc. 425 S. Bowen, #4 Longmont,
3 Closure preparation 3.1 Work-stand 3.2. Opening FIST-GCOG2-Dx Preparing drop cable with micro-tubes
FIST-GCOG2-Dx24 I N S T A L L A T I O N I N S T R U C T I O N FTTH closure for micro-tubes and micro-cables Content 1 Introduction 2 Kit content 3 Closure preparation 3.1 Work-stand 3.2. Opening FIST-GCOG2-Dx24
Unipole and Multipole Connectors
Unipole and Multipole Connectors Miniature Cylindrical Connectors With Push-Pull-Locking Shenzhen Medplus Connector Co.,Limited. 2 th Floor,Ming An Street,GongMing Town, Baoan District, Shenzhen, China
Hardware installation
Hardware installation 5. Place and fix the OMT to the interface without tightening the screws. Figure 291: Place and fix the OMT to the interface Note: Take care to place the OMT with the engraved ARROW
INSTRUCTIONS FOR USE Pro-Ject RPM 9.1
INSTRUCTIONS FOR USE Pro-Ject RPM 9.1 2 PRO-JECT RPM 9.1 Controls, features and connections 1 Separate motor unit (motor and motor base) * 2 Stepped drive pulley 3 Drive belt * 3a Hook 4 Operation indicator
DLMP-45/45R Installation Instructions
DLMP-45/45R Installation Instructions Tools Needed Posidrive No.3 Screwdriver Large Flat Head Screwdriver 2x 10mm Spanner 1x 13mm Spanner Ø8mm Drill Ø6mm Drill Kit Contents [ ] 1x Tube 2.5M long 17420
HDCVI Camera User s Manual
HDCVI Camera User s Manual Version 1.0.2 Table of Contents 1 General Introduction... 1 1.1 Overview... 1 1.2 Features... 1 2 Device Framework... 2 3 Installation... 5 3.1 Installation for Model A... 5
EC Series Creativity Accessories Safety and Installation Guide
EC Series Creativity Accessories Safety and Installation Guide Safety precautions Warning! Before installing Martin EC Series video panels using the accessories described in this guide, read the Safety
Zero-G. Owner s Manual. External Mount INSTALLERS: PLEASE LEAVE THIS MANUAL WITH THE OWNER.
Zero-G Owner s Manual External Mount INSTALLERS: PLEASE LEAVE THIS MANUAL WITH THE OWNER. APPLY S/N STICKER HERE LIMITED ONE YEAR WARRANTY ON SCREEN INNOVATIONS PRODUCTS Screen Innovations warrants its
INSTRUCTIONS FOR USE Pro-Ject 1 Xpression III Comfort
INSTRUCTIONS FOR USE Pro-Ject 1 Xpression III Comfort 1 1 2 PRO-JECT 1 Xpression III Comfort Controls, features and connections 1 Motor transportation screw (marked red) 2 Stepped drive pulley 3 Drive
CONTACT-DUO-PROFILE. Contact-Duo-Profile overview
13 6.3 13 6.3 4.7 20.7 24.6 +1/-0 24.6 +1/-0 2.5 24.6 +1/-0 20.7 4.3 +0.3-0.4 3.6 ±0.3 32.5 32.5 32.5 5 2 CONTACT-DUO-PROFILE Contact-Duo-Profile overview 13 6.3 13 6.3 4.7 2.5 16±0.8 4.7 2.5 4.7 2.5 2.6
Aerospace Fiber Optics
Aerospace Fiber Optics AFO 101, Session 2 Fiber Optic Assembly Everett Community College. All rights reserved. 1 Session Learning Objectives After completing this session you should be able to: Work safely
NWRG Nixie Watch. User Manual
NWRG Nixie Watch User Manual 2 Copyright (C) 2012 Cathode Corner. All rights reserved. Printed in USA Watch made in USA 3 Table of Contents Introduction... 5 Warranty... 7 Operating Instructions... 9 Maintenance...
Product Data Sheet 4656 EZ
The engineer's choice 4656 EZ INDEX 1 General... 3 2 Mechanics... 3 2.1 GENERAL... 3 2.2 CONNECTIONS... 4 3 Operating Data... 5 3.1 ELECTRICAL OPERATING DATA... 5 3.2 OPERATING DATA - ELECTRICAL INTERFACE
ELECTRONIC CONNECTOR ASSEMBLY TRAINING CERTIFICATION EXAM (DVD-62C) v.1
This test consists of twenty multiple-choice questions. All questions are from the video: Electronic Connector Assembly DVD-62C. Use the supplied Answer Sheet and circle the letter corresponding to your
Catalog. Industrial Plugs & Sockets The complete range
Catalog Industrial Plugs & Sockets The complete range Contents Type Page Introduction... 4 IEC 60309-2 (clock)... 5 Product overview Critical & Safe... 6 Tough & Safe... 7 Easy & Safe... 8 Plugs Splashproof...
(E-UB) UPRIGHT BIKE INSTALLATION INSTRUCTIONS
(E-UB) UPRIGHT BIKE INSTALLATION INSTRUCTIONS E-UB Upright Bike 4 620-7922 Rev B GENERAL Before using this product, it is essential to read ALL installation Instructions and this ENTIRE operations manual;
Product information. Front-door station series with video for surface-mount
Product information Front-door station series with video for surface-mount series VPES series VPDS 2 05/2006 Table of contents Scope of delivery...3 Safety notices...3 General notes on the cabling in TCS
SmartMix Manual V5350A
SmartMix Manual V5350A 3 Table of contents Overview................................................... 4 Features.................................................... 4 Scope of delivery................................................
INSTRUCTIONS FOR USE Pro-Ject Essential Basic
INSTRUCTIONS FOR USE Pro-Ject Essential Basic 12 14 14 10 44 22 4 9 1 2 77 8 66 7 3 66 6 5 11 14 13 Controls, features and connections 1 Power switch 2/22 Stepped drive pulley and drive belt * 3 Platter
Product Data Sheet 4656 ZW
The engineer's choice 4656 ZW INDEX 1 General... 3 2 Mechanics... 3 2.1 GENERAL... 3 2.2 CONNECTIONS... 4 3 Operating Data... 5 3.1 ELECTRICAL OPERATING DATA... 5 3.2 OPERATING DATA - ELECTRICAL INTERFACE
Doorphone Video Intercom
HOME SERIES INSTRUCTION MANUAL Doorphone Video Intercom with Colour 4.3 LCD Monitor EN Getting to know your LCD Screen (Front) 1 2 3 4 5 6 1) LCD Screen - This is where you view your visitor that the intercom
Check what you have received against the component checklist and hardware above.
SA46S SA46W SA46B SA46PB Component Checklist Installation Instructions SYSTEMA Systema Monitor Arm 460mm HARDWARE Display Mounting Spacers (x4) Display Mounting Screws Arm Assembly VESA monitor head M4
Bionic Elephant Trunk. Assembly Instructions
Bionic Elephant Trunk Assembly Instructions Equipment and Supplies Required items from the Bionics Kit and/or Materials Pack: 1. Tail fin (small) assembled 2 see Start Here for tail fin assembly instructions
HN Connectors. Automatic Connector. Introduction. Contents. 631/ FAX 631/
Connectors Introduction 2004 Automatic Connector. All rights reserved. pdf 1.0 4-13-04 Contents Specifications........................... 2 Straight Cable Plugs...................... 3 Right Angle Cable
INSTRUCTIONS FOR USE Pro-Ject Primary Phono USB
INSTRUCTIONS FOR USE Pro-Ject Primary Phono USB 2 Pro-Ject Audio Systems Pro-Ject Primary Phono USB/ Pro-Ject 8.6E Revision 2015.08.28 Pro-Ject Primary Phono USB Controls, features and connections 1 Power
900 Series Amplifiers
FlexNet 900 Series Amplifiers Trunks (FNT9) and Bridgers (FNB9) B R O A D B A N D C O M M U N I C A T I O N S P R O D U C T S Equipment Manual FlexNet Trunks (FNT9) and Bridgers (FNB9) B R O A D B A N
CANNON STANDARD page 1 of 18. Cm5 MOTOR CONNECTOR
CANNON STANDARD page 1 of 18 1 General Information... 2 1.1 Scope... 2 2 Ordering Code... 3 2.1 Housing / Motor Side... 3 2.2 Cable Side... 3 3 Explosion Drawing... 3.1 Explosion Complete Assembly... 3.2
General Description. SC Configurations
S onnectors General Description Delta S series connectors are medium-size, 50Ω impedance connectors with 11 16-24 threaded coupling and good power handling capability, particularly those connectors noted
B2590/65SNZ. Crank-Up. Installation & Operation Instruction Manual NZ Iss 1
B2590/65SNZ Crank-Up Installation & Operation Instruction Manual 9111410NZ Iss 1 Useful Information Date of Purchase Retailer Installer Serial Number Contents Warranty P3 Safety Precautions P4 Introduction
SMA One Piece Semi-Rigid Connectors
SMA One Piece Semi-Rigid Connectors The Johnson captivated solderless contact connectors for semi-rigid cable provide a unique solution for high frequency cable assemblers. As compared to standard solder-on
OCTA LUMINA ILLUMINATED FRAMES WITH A SYSTEM TECHNIC 09/17
OCTA LUMINA ILLUMINATED FRAMES WITH A SYSTEM 40 TECHNIC 09/17 UPDATE VERSION 2.0 NEW ARTICLE extension cable OL 132 cable connection OL 134 cable connection OL 138 female plug OL 145 multiplier OL 151
ConnectAnywhere Prep Kit OEM INSTALLATION MANUAL
Connectnywhere Prep Kit OEM INSTLLTION MNUL TBLE OF CONTENTS Introduction 2 Safety 2 Resources Required 3 Preparation 3 Installation 3 Notes 9 Introduction This document provides instructions for the installation
LED Panel Light. Specialists. in High Efficiency Lighting DLC 4.0
LED Panel Light Specialists in High Efficiency Lighting DLC 4.0 E485145 E485145 Dimmable Optional Same cost for dimmable or non dimmable lamps, as same design products can help to reduce product categories
Product Data Sheet 8506 VW-691
The engineer's choice 8506 VW-691 INDEX 1 General... 3 2 Mechanics... 3 2.1 GENERAL... 3 2.2 CONNECTIONS... 4 3 Operating Data... 5 3.1 ELECTRICAL OPERATING DATA... 5 3.2 OPERATING DATA - ELECTRICAL INTERFACE
Growmaster Assembly Instructions
Growmaster ssembly Instructions Item No. Part Sect. Ref. Size mm Quantity Item No. Part Sect. Ref. Size mm Quantity 1001 15 M6 x 12 86x 97x 108x 1067 6 295 16 M6 9 10 113x 1301 7 30 9x 1 13x 5 7 3.5 x
3M Fiber Optic Splice Closure 2178-XL & 2178-XL/FR
3M Fiber Optic Splice Closure 2178-XL & 2178-XL/FR 3M Cable Addition Kit 2181-XL and 2181-XL/FR Instructions September 2017 78-8130-5055-2-M 2 September 2017 78-8130-5055-2-M 1.0 Kit Contents 2.0 General...
Table 4-1: Rating Levels
OBJECTIVES 1. Describe various level ratings that apply to telecommunication cables and jacks and identify where each is implemented. 2. Describe the various levels of the cabling category rating systems.
INSTRUCTIONS FOR USE Pro-Ject 2 Xperience Acryl Pro-Ject 2 Xperience Classic
INSTRUCTIONS FOR USE Pro-Ject 2 Xperience Acryl Pro-Ject 2 Xperience Classic 5 2 Audio Trade GmbH Pro-Ject 2 Xperience Acryl / Classic / Ortofon 2M Red Revision 2012.7.1 Pro-Ject 2 Xperience Acryl / Classic
3M Fiber Optic Splice Closure 2178-XL & 2178-XL/FR 3M Cable Addition Kit 2181-XL and 2181-XL/FR
3M Fiber Optic Splice Closure 2178-XL & 2178-XL/FR 3M Cable Addition Kit 2181-XL and 2181-XL/FR Instructions July 2010 3 1.0 Contents 1.0 General...3 2.0 Kit Contents...3 3.0 Cable Preparation...4 4.0
INSTRUCTIONS FOR USE Pro-Ject Debut Carbon
INSTRUCTIONS FOR USE Pro-Ject Debut Carbon 11 13 11 21 2 1 3 16 6 30 0 5 6a 17 15 9a 1 4 5 8 18 9 7 19 20 17 9a 22 3a 10 11 12 14 2 Pro-Ject Debut Carbon Controls, features and connections 1 Motor brackets
August " BLANK PATCH PANEL FOR STP KEYSTONE JACKS. 19" PATCH PANEL - 24x STP CAT6A PORTS 19" BLANK PATCH PANEL FOR STP KEYSTONE JACKS
19" BLANK PATCH PANEL FOR STP KEYSTONE JACKS WITH EXTRA LONG STRAIN RELIEF BAR The 24-port blank patch panel is designed to use with STP keystone jacks. It can hold up to 24 RJ45 keystone jacks. It features
Check what you have received against the component checklist and hardware above.
SSS SSPW SSW SSPB SSB Component Checklist Installation Instructions SYSTEMA Systema Monitor Spring Arm HARDWARE Display Mounting Spacers (x4) 3/4mm Allen Keys Display Mounting Screws M4 x 14mm (x1) Silver
Connectivity accessories by Nestor Cables
Connectivity accessories by Nestor Cables NesCon product family includes essential installation and connection accessories for fibre optic networks, from ODFs to joint closures and terminations. www.nestorcables.com