Safety warnings. Weather It is advisable to unplug the aerial during an electrical storm.

Transcription

1 Safety warnings Damage Never use your TV if it is damaged in any way. Always place your TV on a flat level surface avoiding anywhere which may be subject to strong vibration. Weather It is advisable to unplug the aerial during an electrical storm. Moisture Do not allow your TV to be exposed to rain, moisture, dust. If any liquid is spilt into your TV it can cause serious damage. If you spill any liquid into your TV switch it off at the mains immediately. Contact your store. Temperature Avoid extremes of temperature, either hot or cold, place your TV well away from heat sources such as radiators or gas/electric fires. Ventilation The TV must be well ventilated. Do not cover your TV or position in a small confined space. It is recommended that you leave a 0cm gap all around your TV. Batteries Batteries are easily swallowed by young children. Do not allow young children to play with the remote control unit. Interference Do not place your TV on or near appliances which may cause electromagnetic interference (TV or HiFi speakers). If you do, it may adversely affect the working of the unit, and cause a distorted picture or sound. Covers Do not remove any fixed covers as this may expose dangerous voltages. Standby Do not leave your TV in standby for long periods of time e.g. overnight or while on holiday.

2 Contents Basic TV features Connection leads supplied TV connections Controls Tuning your TV Basic TV functions Teletext features Using external VC/DVD connections External VC/DVD AV connection External VC/DVD SV connection External VC/DVD component connection External VC/DVD Scart connection Using your PIP functions PC connections Troubleshooting and specifications External Specifications page page page page -5 page 6-7 page 8 page 9 page 0 page page page page -5 page 6 page 7 page 8-9

3 Connection eads Supplied VGA cable AV cable AC Power cord

4 TV Connections Pb Pr S-Video Scart (Euro egion) Pb Pr Video PC GB(Analog) PC Audio Input Audio Output(/) Subwoofer Output F lead (not supplied) Tuner Power AC 0V TV Connections. Connect an F lead (not supplied) into the aerial socket and into a TV wall socket.. Connect the AC power lead to the power socket on the right-hand side of the CD TV and connect the plug into a mains socket.

5 Controls Buttons on the Top of the CD TV Menu Function Channel Function Channel Source Adjust Volume Adjust Volume emote Control Power PIP Function Buttons Scale of Screen Button Sound Select Freeze Button CCD (for American NTSC system only) Menu Function Buttons Sleep Control Volume Control Source Select Channel Control Display The Current Information G C ON/OFF INDEX HOD SIZE PAGE NOTE: Make sure you insert the batteries into the remote control before first use.

6 Tuning in your CD TV Switching on your CD TV If you only want TV connection, connect Turn the power on at the mains socket to your unit as shown put the CD TV into standby mode (the stand in the diagram and by indicator on the front will light up in red). instructions on page. Using the remote control press the POWE button to turn your CD TV on. Selecting TV option If TV is not displayed on screen, press the "TV" button, or press the "MAIN MODE" button : TV : OFF VGA PbPr PbPr CHANNE NO.: 0 MONO repeatedly until CD TV is shown on the screen. The numbers shown next to NOTE: the buttons on the remote The CD TV will always turn on in the last control refer to the buttons used setting mode. that need to be pressed in e.g. If the CD TV is left in TV mode it will each of the stages detailed turn on the next time in TV mode. on this page. Selecting the TV Menu ON/OFF Press the "MENU" (a) button to bring up the OSD menu. G INDEX HOD " (b) " " (c) button to select " (d) " " (e) button to confirm. DISPA SIZE CONTAST BIGHTNESS 8 COO 5 HUE 5 SHAPNESS Press the " C PAGE ECA TV. (d) Press the " (a) (c) (b) Using the TV System Function (e) PA-BG, PA-DK, PA-I, SECAM-DK, SECAM- Press " " (b) " " (c) button on the remote controller to select PA-BG. DISPA CONTAST BIGHTNESS 8 COO 5 HUE 5 SHAPNESS 5 ECA 5 Selecting TV Scan Press the "MENU" (a) button to select TV Function. Press the " DISPA " (e) button to select TV Scan. Press the " the screen will turn blue and the channel number will increase slowly to 5. Please wait the TV scan will take a few minutes. BIGHTNESS 8 COO 5 HUE 5 ECA G INDEX HOD SIZE CONTAST SHAPNESS " (c) button to start auto scan, ON/OFF C PAGE

7 G C Tuning your TV 6 Checking the stored channels Use the channel select "CH " buttons to find a good quality picture. If you are sure which channel you are viewing go to step Using the P-Edit Function Select the TV menu (see section ) and scroll down to P-EDIT. Press " " (b) " " (c) button on the remote controller, you"ll see the P-EDIT picture (Diagram ). P CH ID SKIP SEECT ENTE MENU o o o o o o o o o EXIT (Diagram ) The numbers shown next to the buttons on the remote control refer to the buttons that need to be pressed in each of the stages detailed on this page. A. Use the " " (d) " " (e) button on the remote controller to select what's P you want to edit and press the " " (c) button on the remote controller to enter the P (Diagram ). P CH ID SKIP o (d) (a) (c) (b) (e) CH+ 0-9 ID CH- o x SEECT CEA MENU EXIT (Diagram ) B. According to your requirements to edit the CH/ID/SKIP. a. CH Selection: Use the " " (d) " " (e) button on the remote controller to select a channel or use the numberical key on the remote controller. b. ID input: Press to rotate through "A", "B", "C" and "". Press for "D", "E", "F" and ""... Press 9 for "", "Z", and "9". Press 0 for "+", "-", "." and "0". c. SKIP: "0" means (skip off) and "X" means (skip on). ON/OFF INDEX HOD SIZE PAGE C. Press the "MENU" (a) button to confirm and exit the P setting OSD. 5

8 Basic TV functions Changing channels Press the "CH " button to change channels up or down. 0 Alternatively, use the numbered buttons (0-9) to go directly to a specific channel. Adjusting the volume Press the "VO " button to turn the volume up or down. Using the MUTE function Press the "MUTE" button to turn off the sound. Press the "MUTE" button again to turn the sound back on. 9 9 The numbers shown next to the buttons on the remote control refer to the buttons that need to be pressed in each of the stages detailed on this page. AUDIO settings Press "MODE" button and " ", " " MONO STEEO SAP DUA DUA button to select stereo, mono, dual and dual. 5 Using the ETUN function 5 Press the "ETUN" button to swap to the last channel that you were watching. 0 G C This feature is useful when you constantly want to swap between two channels. ON/OFF INDEX HOD SIZE PAGE 6

9 G C Basic TV functions 6 Using the MODE INF. function Press the "MODE INF." button to show the setting information on the screen. : TV : OFF VGA PbPr PbPr CHANNE NO.: 0 MONO 7 Adjusting picture settings Press the "MENU" (a) button in TV mode. Press the " " (b) " " (c) button to select the Main Menu to setting that you wish to change. Press the " " (d) " " (e) button to select Sub Menu to setting that you wish to change. Press the " " (b) " " (c) button to change the setting. our selected setting will affect all TV channels. DISPA CONTAST BIGHTNESS COO HUE SHAPNESS ECA DISPA CONTAST BIGHTNESS COO HUE SHAPNESS The numbers shown next to the buttons on the remote control refer to the buttons that need to be pressed in each of the stages detailed on this page. ECA Press the "MENU" (a) button again to return to the main screen. 8 Using the CH. button Use the CH. button to display the current channel information on the CD-TV screen. 6 0 (d) (a) (c) (b) 9 (e) 9 Using the SEEP button 8 The SEEP feature is used to automatically shut off this CD-TV after a preset period of time has passed. Press the SEEP button repeatedly to selet 0, 0, 60, 90 or 0 minutes. Selecting 0 turns the SEEP feature off. COUNT DOWN: 59MIN SEEP TIME: 60MIN 6 ON/OFF INDEX HOD SIZE PAGE 0 Using the FEEZE button Use this button to hold a particular image on screen. This may be useful in making fine color adjustments. 7

10 Basic TV Functions Using the SCAING button Use the SCAING button on the remote control to switch the aspect ratio as indicated here: FI A Use FI A to stretch programs to occupy more of the screen. Use FI A to view wide format DVD movies, or enhanced for 6:9 TV. : MODE Use : MODE to maintain the correct original aspect ratio for most videotape, broadcast television, cable, satellite. PANOAMIC Use PANOAMIC to expand : aspect ratio content horizontally using creative non-linear formula. Objects in the middle maintain the original aspect ratio and only the two sides are expanded. The numbers shown next to the buttons on the remote control refer to the buttons that need to be pressed in each of the stages detailed on this page. WIDE Use WIDE to expand letterbox content to occupy more of the screen. Use this mode to zoom the image up to approximate to full screen. The unused portions on the top and bottom of the screen will appear black. G C ON/OFF INDEX HOD SIZE PAGE 8

11 Teletext features Using the Teletext feature Slide the cover downwards on the bottom of the remote control. Teletext is ready for use. Press the "ON/OFF" button to access the Teletext menu. Press the numbered buttons (0-9) to type in the page number of your choice. Using the coloured buttons Press the coloured button of your choice (red, green, yellow or blue) to access the quick menus at the bottom of the text page. Teletext is the name given to the magazine services operated by television companies. A variety of information is available including News, Weather, Financial and Travel information. Teletext is normally transmitted whenever a station is on air. The numbers shown next to the buttons on the remote control refer to the buttons that need to be pressed in each of the stages detailed on this page. Using the SIZE button Press the "SIZE" button to change the size of font (full screen, top half, and bottom half). FU(full screen) TOP(top half) BOTTOM(bottom half) standard full-screen text top half of page appears on the full screen bottom half of page appears on the full screen Using INDEX Press the "INDEX" button to return to page 00 or the indexing picture; and then press 0 to 9. 5 Using the PAGE button Press "PAGE " button to view next page G C ON/OFF INDEX HOD PAGE SIZE 5 on the teletext service. 6 6 Using the HOD button Press "HOD" button to stop the scrolling of text pages. The text decoder stops receiving data. 9

12 G C Using external VC/DVD connections VC/DVD connection Connect your VC or DVD as shown on page 0-. Start to play a Video/DVD in your VC or DVD. Selecting AV connection If you have connected your Video/DVD player using the AV method. Press the "AV" (a) or "MAIN MODE" (b) button continuously until main input. CVBS is shown on the screen. our video should now be playing on-screen. Selecting SV connection If you have connected your DVD player using the SV method. Press the "S-VIDEO" (c) or "MAIN MODE" (b) button continuously until main input. S-Video is shown on the screen. our DVD should now be playing on-screen. : CVBS : OFF VGA PbPr PbPr : S-Video : OFF VGA PbPr PbPr Connect your unit to a VC/DVD as shown in the diagram and instructions on page 0-. The numbers shown next to the buttons on the remote control refer to the buttons that need to be pressed in each of the stages detailed on this page. Selecting Component connection (b) If you have connected your DVD player using the Component. Press the "PbPr or PbPr" (d) button or "MAIN MODE" (b) button continuously until main input. PbPr or PbPr is shown on the screen. our DVD should now be playing on-screen. 5 Selecting Scart connection : PbPr : OFF TV AV SV Scart (d) (a) (c) (e) If you have connected your DVD player ON/OFF INDEX HOD using the Scart method. Press the "SCAT/D" (e) button or "MAIN MODE" (b) button continuously until main input. Scart is shown on the screen. our DVD should now be playing on-screen. : Scart : OFF VGA PbPr PbPr SIZE PAGE 0

13 External VC/DVD AV Connection NOTE: Connect your CD TV as shown in the TV Connections diagram on page before using the VC/DVD connections shown below. Scart (Euro egion) Pb Pb Pr Pr White ed VIDEO or DVD S-Video Video AV External VC/DVD AV Connection. Connect the video lead on the lefthand side (viewed from the back) of your CD TV and to the video socket on your DVD or VC player as shown above.. Connect the audio-in cables on the lefthand side of your CD TV and connect the other end, red and white leads to your DVD or VC player as shown above. Note: Consult your DVD/VC manual for correct AV connections.

14 External VC/DVD SV Connection NOTE: Connect your CD TV as shown in the TV Connections diagram on page before using the VC/DVD connections shown below. Scart (Euro egion) Pb Pb Pr Pr White ed VIDEO or DVD S-Video Video SV Audio In External VC/DVD SV Connection. Connect the SV lead on the lefthand side of your CD TV (as viewed from the back) and to the SV socket on your DVD or VC player as shown above.. Connect the Audio in cable on the leftside of your CD TV and connect the other end ed and White leads on your DVD or VC player as shown above.

15 External VC/DVD Component Connection NOTE: Connect your CD TV as shown in the TV Connections diagram on page before using the VC/DVD connections shown below. Pb Pr S-Video Scart (Euro egion) Pb Pr Video ed Blue Green ed White White Audio In Component ed ed Blue Green VIDEO or DVD External VC/DVD Component Connection. Connect the Component lead on the leftside (PbPr, or PbPr) of your CD TV (viewed from the back) and connect the other end ed, Green and Blue leads on your DVD or VC player.. Connect the Audio in cable on the lefthand side of your CD TV (viewed from the back) and connect the other end ed and White leads on your DVD or VC player.

16 External VC/DVD Scart Connection NOTE: Connect your CD TV as shown in the TV Connections diagram on page before using the VC/DVD connections shown below. Scart (Euro egion) Pb Pb Pr Pr S-Video Video Scart Cable VIDEO or DVD External VC/DVD Scart Connection. Connect the Scart lead on the leftside of your CD TV (viewed from the back) and to the Scart socket on your DVD or VC player as shown above.

17 Using your PIP Functions Selecting main picture Press the "MAIN MODE" button on the remote control. The main picture will be changed in the sequence as follows: TV/AV/S-VIDEO/SCAT/PbPr/PbPr/VGA Using Picture-In-Picture Press the PIP button on the remote control, A new small screen should appear in the screen of your existing screen. Changing PIP source Press the "PIP-SOUCE" button continuously to select between TV/AV/S-VIDEO/SCAT/ PbPr/PbPr/VGA input for your new picture. Ext: Select TV to view TV input in your new picture. Press the "CH " button to change the channel. NOTE: The sub-signal options change as the main signal source changes. : TV : OFF VGA PbPr PbPr CHANNE NO.: 0 MONO : TV : OFF VGA PbPr PbPr : VGA : OFF TV AV SV Scart : VGA : OFF TV AV SV Scart CHANNE NO.: 0 MONO Connect your unit to a PC as shown in the diagram and instructions on page 6. The numbers shown next to the buttons on the remote control refer to the buttons that need to be pressed in each of the stages detailed on this page. OFF TV AV S-VIDEO SCAT PbPr PbPr VGA D (CVBS) (For Europe (For Japan only) only) TV AV CVBS S-VIDEO SCAT (For Europe only) PbPr D PbPr PbPr D (For Japan only) VGA PbPr D G C ON/OFF INDEX HOD PAGE SIZE ou will only be able to listen to sound from the Main Mode Source, you will not be able to get sound from the Sub picture. 5

18 Using your PIP Functions Select the Size of PIP Press the "PIP-SIZE" button to bring up the OSD menu. Press the "PIP-SIZE" button continuously to select between -5, 5 screen size are available. : VGA : OFF TV AV SV Scart Connect your unit to a PC as shown in the diagram and instructions on page 6. : VGA : OFF TV AV SV Scart 5 Select the Position of PIP Press the PIP-POS button continuously to select between 0-. : VGA : OFF TV AV SV Scart The numbers shown next to the buttons on the remote control refer to the buttons that need to be pressed in each of the stages detailed on this page. 0 : VGA : OFF TV AV SV Scart Using the Swap function Press the SWAP button to Swap between main picture and Sub picture under PIP mode. : VGA : OFF TV AV SV Scart G C : AV : OFF TV VGA SV Scart ON/OFF INDEX HOD SIZE PAGE 6

19 PC Connections PC GB(Analog) PC Audio Input D-sub Audio In Audio Output(/) Subwoofer Output Audio Out (not supplied) F lead (not supplied) Tuner Power AC 0V PC Connection NOTE: Make sure that your PC is shut down and switched off before you make any of the connections described and shown above.. Connect an F lead (not supplied) into the aerial socket and into a TV wall socket if you wish to view a TV picture and use your PC.. Connect your AC power socket on the lefthand side of the CD display screen.. Plug the power cable into a mains socket.. Connect your Audio in cable on the righthand side of your CD TV (as viewed from the back) and to the sound output socket on your PC. Consult your PC manual for socket positions. 5. Connect your GB cable to the D-Sub port on the righthand side of your CD TV (as viewed from the back) to the relevant monitor socket on your PC. 6. Connect the Audio out cable (not supplied) on the righthand side (as viewed from the back) of your CD TV and the other end of the audio out sound cable to the PC speaker connection. NOTE: To select PC input, press the PC button. 7

20 Troubleshooting and Specifications Symptom Poor or no colour No Teletext or strange characters or letters on screen emote control does not work or operates erratically Unable to hear sound ines are moving across the TV picture Cannot select a channel with the CH button Cause Aerial or connection cable is not connected or is damaged. Colour control is not adjusted. Aerial connection is poor or possible station trouble. Weak or exhausted batteries. Batteries placed in the wrong way. Volume is set too low or your unit is in Mute mode. Check if equipment connected via the ellow, ed and White connectors is on. The skip indicator is set to "OFF". Solution Check al aerial connections for broken or damaged wires. If necessary replace with new cables. Try using aerial booster to improve the quality of the signal. Adjust the colour Check aerial connections for broken wires or try another station. eplace the batteries. Check that you have put the batteries in the remote control the right way around. Press the VO + button to turn up the sound or press the MUTE button to get out of Mute mode. Switch off. Follow the instruction in step 7B, page 5 to change the skip indicator to "ON". Model Features: 7.0" viewable SXGA media CD TV 80 x 0 active native resolution Wide 70 /70 viewing angle Specifications: Net Weight: Dimensions: 8.0 kg Width 8mm, Height 76mm, Depth 00mm Because we continually strive to improve our products we may change specifications and desigms without prior notice. Weights and Dimensions are approximate. 8

21 External Specifications Display Panel Screen Size 597.mm x 5.88mm (6.97" Diagonal) Aspect atio 6:9 Number of Pixels 80x70x(/G/B) Pixel Pitch 0.665mm pixel pitch. Display Color 6.7M(/G/B 8Bits) uminance 500 cd/m Center) Contrast (C>=0) 500: (Typ) Viewing Angel Horizontal: 70 Degrees Vertical: 70 Degrees esponse Time (Gray to gray) 6 ms (typ) Expected ife Time 50,000 hrs. (minimum) Manufacture CMO Power Source Input Voltage AC00-0/A Input Current / Inrush Current 5A (MS) max for 5 VAC, 80A (MS) max for 0 VAC Power Consumption Standby Mode & DPMS UNDE 5W Operation Mode 50W Signals Input / Output GB In (Mini-D 5PIN ) * Signals Input / Output Phone Jack In * Audio Ou t (CA TPE) * Subwoofer out * PIP PIP x 5 Size Compatibility SXGA 80x0@ 60Hz XGA 0 x 60,70,75Hz SVGA 800 x 600@ 56,60,7,75,85Hz VGA 60 x 80@ 60,7,75,85Hz OTHE 70 x 00@70Hz,60x00@70Hz Internal Speaker set(/)8w+8w Simulative surround User Control [Power], [SOUCE], [MENU], [FUNCTION/ Channel+], [FUNCTION/Channel-], [ ight/ VOUME+], [eft/voume -] Modul dimensions Widt h 5cm Heigh t 8cm Depth 8cm Package Dimensions Widt h cm Heigh t 6cm Depth 96cm 9

22 External Specifications Weight Net Weight 8KG Gross Weight.8KG Stand Weight.6KG Wall mount weight.kg Environment Temperature(Operation/Storage) F to 0 F(0 C to 0 C) / - F to 0 F (-0 C to 60 C) elative Humidity (Operation/Storage) 0% to 90% (no condensation) / 0% to 90% (no condensation) Pressure 500mmHg egulation Safety CU/U, CB EMC BSMI, FCC Class B, CE,VCCI Accessories Power Cord, PC Cable, User Manual 0