Operator Training. Agenda 2 MCM-100S. 13jun Key features of the product. 2. Identification of main parts. 3. Powering the system on/off

Transcription

1 Operator Training 12 June 2013 Stefaan Verkest version 00 Agenda 1. Key features of the product 2. Identification of main parts 3. Powering the system on/off 4. Connections 5. On Screen Display (OSD) or Menu 6. Basic operations 7. Maintenance 8. Warnings 9. Limitations and restrictions 10. Diagnostics 11. List of available documentation 12. Who to contact in case of problems 2 1

2 Key features of the product (1) Image processing box HDTV (1920x1080) or WUXGA resolution (1920x1200) Designed for multi-projector V&AR display systems Geometry correction (Warping) Color alignment (Dynacolor) Edge blending (Soft edge) Image correction on a pixel-by-pixel base (Alpha/Beta planes) 3D stereo Active stereo up to 120Hz StereoCreator Synchronization between boxes 3 Key features of the product (2) Output can run synchronously with selected input Controlled via RCU (IR) or XDS RACU (Ethernet) Compatible with XDS Control Center software Very suitabe in Corporations: multi channel meeting rooms, flat and curved screens Automotive, Oil & Gas, Scientific research:3d visualization Theme parks 4 2

3 Identification of the main parts (1) Diagnostic LEDs IR receiver Mount brackets 5 Identification of the main parts (2) Description A B C D E F G H Desktop input Source inputs Stereo sync inputs Stereo sync outputs Network Output connector Power connector Fuse 6 3

4 Identification of the main parts (3) Power supply Power cord Remote Control Unit 7 Powering the system ON and OFF (1) Powering ON 1. Connect the power supply to the 2. Connet the power cord to the power supply 3. Connect the power cord to the wall outlet. 4. Wait for the unit to come to active mode (ON). 8 4

5 Powering the system ON and OFF (2) Switching OFF i.e. switching from Active mode to Standby mode 1. In Active mode, press the on/off key for 3 seconds. 2. The ON LED turns off and the STANDBY LED turns on. 9 Powering the system ON and OFF (3) Switching ON i.e. switching from Standby mode to Active mode 1. In Standby mode, press the on/off key for 1 second. 2. The STANDBY LED turns off and the ON LED turns on. 10 5

6 Powering the system ON and OFF (4) Powering OFF 1. Switch off the 2. Disconnect the power cord from the wall outlet. 11 Connections Additional information Desktop IN: see XDS Displays training DVI connectors do not support analog signals SL-DVI and DL-DVI available RGB data: RGBHV, RGsB, RGBCs, YUV DVI out is HDTV or WUXGA Stereo sync out: stereo emitter and/or synchronization 12 6

7 On Screen Display (OSD) or Menu (1) In the Menu <Main menu item> : press the down arrow key on the RCU to open the drop down menu (e.g. General) <Text>... :a new dialog box or edit box opens when selecting and confirming this item (e.g. Identification...) <Text> : press the right arrow key on the RCU to open the drop down menu (e.g. Desktop ) 13 On Screen Display (OSD) or Menu (2) In edit boxes of the Menu Select the edit field and confirm Use arrow keys and to select the character to be changed Use arrow keys and to change the selected character, or Use the keys 0..9 to enter a digit 14 7

8 Basic operations (1) Setting the RCU address Common IR address is 0 by default Setting the IR address 15 Basic operations (2) Selecting a source via RCU Selecting a source via menu 16 8

9 Basic operations (3) Aligning a source on the screen, or perform a Limited or Full scan (full scan can take more than two minutes) 17 Basic operations (4) Pause - Resume Freeze - Unfreeze 18 9

10 Basic operations (5) Image settings: do not change in multi-channel systems! 19 Basic operations (6) Changing color temperature In multi channel systems, this will lead to bad color uniformity! If colors have been aligned during installation, return to those settings by enabling Dynacolor (see next slide) 20 10

11 Basic operations (7) Enabling defined color correction (Dynacolor) Enabling Dynacolor only makes sense if colors have been calibrated and/or aligned during installation In multi channel systems, Dynacolor should always be enabled! 21 Maintenance (1) First use Check device and cables on damage Weekly maintenance Check device and cables on damage: repair or replace damaged items Display test patterns and check the projected image 22 11

12 Maintenance (2) Monthly maintenance Vacuum clean air inlet grids in dusty environment Yearly maintenance Clean the device 23 Maintenance (3) Condition based maintenance Make a backup each time settings are changed Upgrade the firmware if needed Replace the batteries of the RCU 24 12

13 Warnings Message No signal Desktop resolution not valid Wait box Description Source signal not available: check source, cables Source signal on XDS Desktop input is not check source, cables Processing is ongoing: wait 25 Limitations and restrictions 10 C 50 F < Operational temperature < 40 C 104 F 26 13

14 Diagnostics Diagnostic LEDs LED/ status No power Standby mode Configuring Active mode IR activity STANDBY (red) OFF ON ON OFF NA NA ON (green) OFF OFF ON ON NA NA ERROR (red) OFF OFF OFF OFF NA ON Hardware error IR (green) OFF ON (network ok) OFF (no network) ON ON (network ok) OFF (no network) BLINKING NA 27 List of available documentation Basic user User guide: R Safety manual: R Advanced user / administrator API command set: R WEEE Recycling passport: R

15 Who to contact in case of problems (1) First line help: Contact a certified specialist in your company Escalation flow: Contact your local Barco Partner or Integrator Contact Barco support: Training & Support > Support 29 Who to contact in case of problems (2) Make sure to have the following information available: Device identification Diagnostics information 30 15

16