SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

Transcription

1 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CENTRO DE METROLOGIA, CALIBRACION Y CAPACITACION INTEGRAL S.A. DE C.V. C. Cuicuicatzin #1280 Col. Aguilas de Zaragoza Cd. Juarez Chihuahua MEXICO Mario Rodriguez Phone: CALIBRATION Valid until: September 30, 2018 Certificate Number: In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory to perform the following calibrations 1 : I. Dimensional Parameter/Equipment Range CMC 2, 5 ( ) Comments Caliper 3 Up to 10 in 380 µin Gage blocks Outside Micrometer 3 Up to 10 in ( L) µin Gage blocks Height Gage Up to 10 in ( L) µm Gage blocks Dial Gage Up to 2 in 210 µin Gage blocks Angle Protractors 3 (0 to 90) 0.02 Angle block Outside Diameter Cylindrical Plug Gages Up to 30 mm ( L) µm Reference cylindrical standards and laser micrometer as comparator (A2LA Cert. No ) Revised 08/28/2018 Page 1 of 10

2 II. Electrical DC/Low Frequency Parameter/Equipment Range CMC 2, 4 ( ) Comments DC Voltage Generate 3 Up to 320 mv ( to 3.2) V ( to 32) V ( to 320) V ( to 1050) V 28 µv 290 µv 2.9 mv 30 mv 99 mv DC Current Generate 3 (0 to 320) μa ( to 3.2) ma ( to 32) ma ( to 320) ma ( to 3.2) A ( to 10.5) A ( to 20) A 83 na 630 na 6.4 µa 72 µa 2.4 ma 7.6 ma 19 ma Parameter/Range Frequency CMC 2, 4 ( ) Comments AC Voltage Generate 3 (0 to 10) mv % 0.60 mv 1.2 mv 2.3 mv 6.0 mv ( to 32) mv % % % % 1.6 mv ( to 320) mv % % % % 1.1 mv ( to 3.2) V 1.8 mv 1.8 mv 2.8 mv 4.5 mv 11 mv (A2LA Cert. No ) Revised 08/28/2018 Page 2 of 10

3 Parameter/Range Frequency CMC 2, 4 ( ) Comments AC Voltage Generate 3 (cont) ( to 32) V 18 mv 26 mv 36 mv 67 mv 170 mv ( to 105) V 58 mv 83 mv 120 mv 220 mv 550 mv ( to 320) V (40 to 100) Hz 100 Hz to 1 khz (1 to 3) khz 210 mv 210 mv 320 mv 340 mv 500 mv 630 mv ( to ) V (40 to 100) Hz 100 Hz to 1 khz (1 to 3) khz 540 mv 540 mv 820 mv 870 mv 1.3 V 2.0 V ( to 1050) V (40 to 100) Hz 100 Hz to 1 khz (1 to 3) khz 610 mv 610 mv 890 mv 990 mv 1.8 V AC Current Generate 3 (0 to 32) µa 1.1 µa 2.2 µa 7.1 µa 11 µa (A2LA Cert. No ) Revised 08/28/2018 Page 3 of 10

4 Parameter/Range Frequency CMC 2, 4 ( ) Comments AC Current Generate 3 (cont) ( to 320) µa ( to 3.2) ma ( to 32) ma ( to 320) ma ( to 3.2) A ( to 10.5) A ( to 20) A (10 to 3) khz 630 na 1.1 µa 3.1 µa 4.4 µa 3.0 µa 4.5 µa 9.8 µa 13 µa 30 µa 45 µa 89 µa 150 µa 0.34 ma 0.43 ma 0.82 ma 1.1 ma 0.16 ma 13 ma 31 ma 74 ma 56 ma 150 ma Parameter/Equipment Range CMC 2, 4 ( ) Comments Resistance Generate 3 (0 to 40) Ω ( to 400) Ω ( to 4) kω ( to 40) kω ( to 400) kω ( to 4) MΩ ( to 40) MΩ ( to 400) MΩ 24 mω 93 mω 790 mω 8 Ω 93 Ω 1.1 kω 35 kω 330 kω (A2LA Cert. No ) Revised 08/28/2018 Page 4 of 10

5 Parameter/Equipment Range CMC 2, 4 ( ) Comments Electrical Simulation of Thermocouple Indicating Devices 3 Type B Type C Type E Type J Type K Type L Type N Type R Type S (500 to 800) C (800 to 1000) C (1000 to 1400) C (1400 to 1820) C (0 to 600) C (600 to 1000) C (1000 to 1800) C ( to 2320) C C to C C to C C to C C to C C to C C to C C to C C to C C to C C to C C to C C to C C to C C to C C to C C to C C to C C to C C to C C to C C to C 0.0 C to C C to C C to C C to C 0.0 C to C C to C C to C C to C 0.61 C 0.49 C 0.43 C 0.45 C 0.40 C 0.38 C 0.49 C 0.49 C 0.52 C 0.31 C 0.36 C 0.32 C 0.33 C 0.63 C 0.37 C 0.32 C 0.37 C 0.36 C 0.31 C 0.32 C 0.42 C 0.33 C 0.35 C 0.59 C 0.49 C 0.45 C 0.39 C 0.55 C 0.45 C 0.43 C 0.44 C (A2LA Cert. No ) Revised 08/28/2018 Page 5 of 10

6 Parameter/Equipment Range CMC 2, 4 ( ) Comments Electrical Simulation of Thermocouple Indicating Devices 3 (cont) Type T C to C C to C C to 0.0 C 0.0 C to C 0.44 C 0.39 C 0.36 C 0.33 C Electrical Simulation of RTD Indicating Devices Resistance 3 Pt 385 ( to ) C ( to 100.0) C (100.0 to 630.0) C (630.0 to 850.0) C 0.16 C 0.11 C 0.21 C 0.31 C Pt 392 ( to ) C ( to 100.0) C (100.0 to 630.0) C 0.16 C 0.11 C 0.21 C DC Voltage Measure 3 Up to 100 mv ( to 1) V ( to 10) V ( to 100) V ( to 1000) V 13 µv 58 µv 210 µv 5.2 mv 56 mv Resistance Measure 3 Up to 100 Ω ( to 1) kω ( to 10) kω ( to 100) kω ( to 1) MΩ ( to 10) MΩ ( to 100) MΩ 80 mω 170 mω 1.7 Ω 18 Ω 170 Ω 6.4 kω 1.5 MΩ Agilent 34401A DC Current Measure 3 Up to 10 ma ( to 100) ma (0.1 to 1) A ( to 3) A (3.01 to 10) A 11 µa 85 µa 1.7 ma 6.5 ma 82 ma Agilent 34401A (A2LA Cert. No ) Revised 08/28/2018 Page 6 of 10

7 Parameter/Range Frequency CMC 2, 4 ( ) Comments AC Voltage Measure 3 Agilent 34401A (Up to 100) mv (3 to 5) Hz (5 to 10) Hz 10 Hz to 50 khz (100 to 300) khz 1.2 mv 5470 µv 300 µv 1.1 mv 5.6 mv ( to 1) V Up to 10 Hz (10 to 60) Hz 60 Hz to 1 khz (1 to 5) khz (5 to 20) khz (20 to 50) khz 4.4 mv 1.1 mv 1.1 mv 1.1 mv 2.1 mv 3.9 mv ( to 10) V Up to 10 Hz (10 to 45) Hz 45 Hz to 1 khz (1 to 10) khz 13 mv 13 mv 13 mv 13 mv ( to 100) V Up to 10 Hz (10 to 45) Hz 45 Hz to 1 khz (1 to 10) khz 70 mv 70 mv 70 mv 70 mv ( to 750) V Up to 45 Hz 45 Hz to 60 Hz 60 Hz to 1 khz 0.78 V 0.78 V 0.78 V AC Current Measure 3 Up to 1 A (5 to 10) Hz 10 Hz to 5 khz 3.1 ma 2.9 ma Agilent 34401A ( to 3) A (5 to 10) Hz 10 Hz to 5 khz 12 ma 12 ma (3.01 to 10) A 45 Hz to 1 khz 240 ma Fluke 87 AC High Voltage Measure 3 (0 to 6) kv Up to 60 Hz 70 V Fluke 87/Fluke 80K-6 (A2LA Cert. No ) Revised 08/28/2018 Page 7 of 10

8 Parameter/Equipment Range CMC 2, 4 ( ) Comments DC High Voltage (0 to 6) kv 70 V Fluke 87/Fluke 80K-6 Measure 3 III. Mechanical Parameter/Equipment Range CMC 2 ( ) Comments Force 3 Tension Up to 100 lbf (100 to 500) lbf lbf 1.6 lbf NIST Class F weights, Omega load cell Compression Up to 100 lbf (100 to 500) lbf lbf 1.4 lbf NIST Class F weights, Omega load cell Weighing Instruments 3 Up to 96 lb lb NIST Class F weights Pressure 3 (-12 to 300) psi (50 to 500) psi 0.09 psi 0.30 psi Druck DPI 610 IS Fluke 700G07 Torque Tools 3 Up to 100 inlbf 0.96 % of reading Torque transducer IV. Thermodynamics Parameter/Equipment Range CMC 2 ( ) Comments Thermometers, Temperature Indicating Devices 3 (120 to 480) C 0.16 C Ametek 601 dry block Temperature Measure 3 (-40 to 450) C 0.18 C Extech/PT392 Relative Humidity Measuring Equipment 14 % RH 32 % RH 72 % RH 2.5 % RH 2.5 % RH 2.5 % RH Professional hygrometer & salt solutions (A2LA Cert. No ) Revised 08/28/2018 Page 8 of 10

9 Parameter/Equipment Range CMC 2 ( ) Comments Relative Humidity (14 to 72) % RH 2.4 % RH Professional hygrometer Measure 3 V. Time & Frequency Parameter/Equipment Range CMC 2, 4 ( ) Comments Frequency Measuring 0.5 Hz to 100 MHz 280 mhz Equipment 3 Frequency Measure 3 (5 to 10) Hz (10 to 40) Hz 40 Hz to 300 khz 3.6 mhz 14 mhz 36 Hz Agilent 34401A Timers 3 (1 to 120) s 26 ms Tektronix TDS This laboratory offers commercial calibration service and field calibration service. 2 Calibration and Measurement Capability Uncertainty (CMC) is the smallest uncertainty of measurement that a laboratory can achieve within its scope of accreditation when performing more or less routine calibrations of nearly ideal measurement standards or nearly ideal measuring equipment. CMCs represent expanded uncertainties expressed at approximately the 95 % level of confidence, usually using a coverage factor of k = 2. The actual measurement uncertainty of a specific calibration performed by the laboratory may be greater than the CMC due to the behavior of the customer s device and to influences from the circumstances of the specific calibration. 3 Field calibration service is available for this calibration and this laboratory meets A2LA R104 General Requirements: Accreditation of Field Testing and Field Calibration Laboratories for these calibrations. Please note the actual measurement uncertainties achievable on a customer's site can normally be expected to be larger than the CMC found on the A2LA Scope. Allowance must be made for aspects such as the environment at the place of calibration and for other possible adverse effects such as those caused by transportation of the calibration equipment. The usual allowance for the actual uncertainty introduced by the item being calibrated, (e.g. resolution) must also be considered and this, on its own, could result in the actual measurement uncertainty achievable on a customer s site being larger than the CMC. (A2LA Cert. No ) Revised 08/28/2018 Page 9 of 10

10 4 The stated measured values are determined using the indicated instrument (see Comments). This capability is suitable for the calibration of the devices intended to measure or generate the measured value in the ranges indicated. CMCs are expressed as either a specific value that covers the full range or as a percent or fraction of the reading plus a fixed floor specification. 5 In the statement of CMC, L is the numerical value of the nominal length of the device measured in inches. (A2LA Cert. No ) Revised 08/28/2018 Page 10 of 10

11 Accredited Laboratory A2LA has accredited CENTRO DE METROLOGÍA, CALIBRACION Y CAPACITACION INTEGRAL S.A DE C.V Chihuahua, MEXICO for technical competence in the field of Calibration This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories. This laboratory also meets any additional program requirements in the field of calibration. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated 8 January 2009). Presented this 14 th day of April Senior Director of Quality and Communications For the Accreditation Council Certificate Number Valid to September 30, 2018 Revised August 28, 2018 For the calibrations to which this accreditation applies, please refer to the laboratory s Calibration Scope of Accreditation.