Test report for a Draka UK Ltd. SIFER 950i 1x1.5mm 2 cable to IEC :2004. Prepared for: Draka UK Ltd. Alfreton Road Derby DE21 4AE

Transcription

1 Test report for a Draka UK Ltd. SIFER 950i 1x1.5mm 2 cable to Prepared for: Draka UK Ltd. Alfreton Road Derby DE21 4AE 14 December Page 1 of 5

2 Prepared on behalf of BRE Global by Name Ben Elgy Position Consultant Signature Authorised on behalf of BRE Global by Name Dave Hoare Position Senior Consultant Date 14 December 2010 Signature BRE Global Bucknalls Lane Watford Herts WD25 9XX T + 44 (0) F + 44 (0) E enquiries@breglobal.com BRE Global is not UKAS accredited to make opinions and interpretation. Any opinions and interpretations included as part of this report are clearly marked as such This report may only be distributed in its entirety and in accordance with the terms and conditions of the contract. Test results relate only to the items tested. We have no responsibility for the design, materials, workmanship or performance of the product or items tested. This report does not constitute an approval, certification or endorsement of the product tested. This report is made on behalf of BRE Global. By receiving the report and action on it, the client accepts that no individual is personally liable in contract, tort or breach of statutory duty (including negligence). No third party has any right to rely on this report. Page 2 of 5

3 1 Introduction The requirement of the work was to determine the performance of a Draka UK Ltd. SIFER 950i 1x1.5mm² cable when subjected to the conditions specified in [1]. The client for this work was Draka UK Ltd., Alfreton Road, Derby, DE21 4AE. The client s order number was Page 3 of 5

4 2 Details of sample and test carried out The cable tested was a 3.5mm diameter, single core cable comprising 1 off 1.5mm 2 stranded copper conductor with mica tape and a black insulation. The insulation had the following printed marking: (DRAKA UK) SIFER 950i Gen to BS6387 IEC /1000V x1.5mm2 MADE IN UK LPCB 361h/01 No product information was supplied. The client reference for the cable was SIFER 950i 1x1.5mm 2. The test specimen was supplied by the client and received on 12 November BRE Global was not involved in the sample selection process and therefore cannot comment upon the relationship between samples supplied for test and the product supplied to market. The client requested that the test was undertaken in accordance with and this report should be read in conjunction with it. The test was conducted on 14 December Prior to the tests being carried out, the sample was conditioned as required by test standard. Page 4 of 5

5 3 Test Result Cable Cable diameter Burner application time (s) Unaffected Distance Extent of downward charring SIFER 950i x1.5 mm 2 4 Conclusion The recommended performance requirements of Annex A of test are as follows: A single insulated conductor or cable shall pass the test if the distance between the lower edge of the top support and the onset of charring is greater than 50mm. In addition, a failure shall be recorded if charring extends downward to a point greater than 540mm from the lower edge of the top support. The Draka UK Ltd. SIFER 950i 1x1.5 mm 2. cable met the performance requirement given in 5 Reference 1., Tests on electric and optical fibre cables under fire conditions Part 1-2: Test for vertical flame propagation for a single insulated wire or cable Procedure for 1 kw premixed flame, International Electrotechnical Commission, Geneva, ==============REPORT ENDS============= Page 5 of 5