Thank you for purchasing this product. If installing for someone else, please ensure that the instructions are handed to the householder.
|
|
- Gillian Wade
- 5 years ago
- Views:
Transcription
1 Instruction Manual TPSE201 (181422) - BOSS TM Universal Programmer TPSE101 (569565) - BOSS TM Universal Timeswitch Thank you for purchasing this product. If installing for someone else, please ensure that the instructions are handed to the householder. Please read this manual prior to installation or use. Retain for future reference. Always isolate the mains supply before removing the unit from the backplate. Please leave these instructions with the end user where they should be kept in a safe place for future reference Installation The TPSE201/TPSE101 is easily installed using the backplate supplied. This can be mounted directly to the wall or a single gang recessed box using the holes provided; cable entry is from the rear. Specification Power supply Switch rating Switch type 230V/50Hz 6(2)A Single pole, double throw (SPDT) Operating temperature 0 C - 50 C Storage conditions -20 C - 60 C Frost protection temperature 5 C Programme Time display Memory Backlight 5/2, 7 day or daily selectable by jumper 3 setting per day 12 or 24 hour Internal memory back-up Green LED Switches/Jumpers The installer should select the jumper positions required if changing from the factory pre-sets, these jumpers are found on the rear of the unit. Always enable the internal memory back up battery before installing the unit, Switch/Jumpers Program type P/G (TPSE201 only) Internal backup battery Function 3x2 pins jumpers for 5+2 days (factory default setting), 7 days program or daily 3x1 pin jumper for fully pumped and controlled system (factory default setting) or gravity-fed hot water system. 3x1 pin jumper to enable/disable the internal backup battery (disabled is the factory default setting) 1
2 BackPlate & Wiring This unit does not require an earth connection. The earth terminal is provided for safe retention of circuit earth wires only. 1. Select a suitable location noting the advice in page 1 of this manual, a suitable mounting height is 1.5m above the floor 2. Isolate the AC mains supply, note this must be 230Vac and fused at 6 Amps. 3. Optimum cable size is 1.5mm 2 Check the system wiring specification to confirm connections and cable core colour identification. 4. Cable must enter from the rear of the backplate. 5. Securely fix the backplate directly to the wall or fit to a recessed back box. 6. Terminate cables in accordance with the wiring diagram on the unit, ensuring conductors are firmly gripped between the square brass washers. 7. This appliance is double insulated and must not be earthed. The earth terminal is provided for safe retention of circuit earth wires only. 8. The backplate has 6 holes through which to fix to the surface of your choice. Please note that when fitting the controller to the backplate, some pressure downwards is required to lock the pins in the unit to the connectors in the backplate. Secure the controller to the backplate with the captive screws at the bottom taking care not to over tighten. 9. Enable the memory back up. 10. Restore mains to system when all the associated items are fully installed and test for correct operation. NOTE: mains power is required to programme unit. Please note: Always isolate the mains power prior to fitting the unit onto the backplate and when the backplate is exposed. Terminals: TPSE101 Terminal Name Function N Neutral L Live 2 Common (ex-factory with jumper to L) 3 (CH OFF) Central Heating OFF 4 (CH ON) Central Heating ON E Earth Remark: For volt free setting, remove jumper between L & 2. TPSE201 Terminal Name Function N Neutral L Live 1 (HW OFF) Hot Water OFF 2 (CH OFF) Central Heating OFF 3 (HW ON) Hot Water ON 4 (CH ON) Central Heating ON E Earth 2
3 Internal Wiring Wiring diagrams (TPSE201) Alternative wiring connections for other BOSS TM room thermostats * Wireless thermostat receiver unit MUST have permanent mains power from fused spur to operate correctly. 3
4 Wiring diagrams (TPSE101) Note: Wireless thermostat receiver unit MUST have permanent mains power from fused spur to operate correctly. User Instructions Keyboard Key Mode (CH) Hr+ (CH) Adv (CH) Mode (HW) Only for TPSE201 Hr+ (HW) Only for TPSE201 Adv (HW) Only for TPSE201 Function Operating mode selection for Central Heating Temporary override for Central Heating Advance to next program for Central Heating Operating mode selection for Hot Water Temporary override for Hot Water Advance to next program for Hot Water Increase set Temperature. Decrease set Temperature. Turn on backlight for 10 seconds. Activate/de-activate holiday override. Set Select Press to begin/confirm programming settings. Press to select day(s)/time/temperature. 4
5 Initial Power Up After power up or Reset is pressed, all programmes are reset. During system reset, all LCD segments are turned on for 2 seconds. After 2 seconds, the programmer is initialized and the display will look like this. Setting of the TPSE201/TPSE101 after reset Function Status after Reset Operation Mode Auto mode 12/24 hour 24h Clock 12:00 AM/PM indicator N/A Date 2016-Jan-1 Daylight Saving On Program Default factory setting Program Number indicator Depends on program SET indicator Off PROG indicator Off Mode indicator(s) Auto CH/HW indicator(s) Depends on program Output Relay Depends on program After reset, the TPSE201/TPSE101 will operate in Auto mode. Default Program Settings after reset Same for both 5-2 and 7 days programmes. Program CH HW Output Day of week (Mon to Sun) Day of week (Mon to Sun) On 06:00 06:00 Off 08:00 08:00 On 10:00 10:00 Off 12:00 12:00 On 18:00 18:00 Off 22:00 22:00 5
6 Setting the Clock Press and hold Set and Select in Normal mode for 3 seconds to enter Clock setting mode. 12 hr or 24 hr, and SET are displayed. All other indicators are cleared. Release Set and Select, press or to toggle between 12 hr or 24 hr format. Press Select, clock and SET are displayed. Hour is flashing to indicate that it is the selected item to be adjusted. Release Select, press or to increase or decrease the hour respectively. Press and release Select, press or to increase or decrease the minute respectively. Press and release Select to set the Year, y xx is displayed, press or to increase or decrease the year respectively. The year can set between and inclusive. Press and release Select to set the Month of Year, m xx is displayed, press or to increase or decrease the month respectively. The month can set between 01 to 12. Press and release Select to set the Day of Month, d xx is displayed, press or to increase or decrease the day respectively. The day can set between 01 to the end of the month which is determined by the year and month set above. 6
7 Press and release Select to set Day Light Saving, dls xx is displayed, press or to enable or disable the Day Light Saving. Press and release Select to allow change of hour again, but not the 12/24 hour format. Press and hold or for 2 seconds to advance the value quickly without repeated presses. Selected item will stop flashing when a key is pressed. The selected item will flash again once the key is released. Press Set at any time to confirm the setting and return to normal mode. TPSE201 / TPSE101 will return to normal mode after 10 seconds if no key is pressed, the clock is also updated with the latest setting. Day Light Saving When enabled, the clock will automatically shift 1 hour ahead of the current set time from the last Sunday in March at 2:00am until the last Sunday in October at 2:00am. 5-2, 7 days or daily program Programmed events must happen in chronological order i.e., the OFF time cannot be earlier than the ON time and the time of program 3 cannot be earlier than that of program 2 etc. Each time can be set between 3.00 am and 2.50 am (on the next day) to allow you to programme the CH/HW to stay on past midnight, if required. The PROG display indicates the program number. The CH/HW display indicates whether CH or HW is being programmed. No CH/HW indicator is displayed in TPSE101. The selected item will be flashing and can be adjusted by or key. Program time is changed in 1 minute steps. Press and hold or for 2 seconds to advance the value quickly without repeated presses. Selected item will stop flashing when a key is pressed. The selected item will flash again once the key is released. The unit will return to normal mode after 10 seconds if no key pressed, Program settings are stored. Program review/changes are allowed even when Temporary Override or Adv Mode is enabled. 5-2 days program selected Central Heating and Hot Water have independent programmes set. 3 different time settings can be programmed for weekdays or weekend. Total 6 settings for TPSE101, and 12 settings for TPSE201. To review or change program, press Set in normal mode to enter programming mode. The weekday and SET PROG are displayed, all other indicators are cleared. The weekdays are flashing to indicate that it is the selected item to be adjusted. 7
8 Press or to select the program set for Weekday/Weekend/CH/HW to be reviewed or adjusted in the sequences below. TPSE101: Weekday CH -> Weekend CH -> Weekday CH -> TPSE201: Weekday CH -> Weekend CH -> Weekday HW -> Weekend HW -> Weekday CH -> Press Set at any time to confirm the setting and return to normal mode. Press Select at any time to confirm the selection. The hour is flashing to indicate that it is the selected item to be adjusted. Press Select to step through the items to be reviewed or adjusted in the sequences below. (Program 1 ON) hour minute (Program 1 OFF) hour minute (Program 2 ON) hour minute (Program 2 OFF) hour minute (Program 3 ON) hour minute (Program 3 OFF) hour minute and then cycle back to (Program 1 ON) Press Set at any time to confirm the setting and return for program set selection. 7 days program selected Central Heating and Hot Water have independent programmes set. 3 different time settings can be programmed for each day of week. Total 21 settings for TPSE101 and 42 settings for TPSE201. To review or change a program, press Set in Normal mode to enter programming mode. The Monday and SET PROG are displayed. All other indicators are cleared. The day of the week is flashing to indicate that it is the selected item to be adjusted. 8
9 Press or to select the program set for Day of Week to be reviewed or adjusted in the sequences below. Monday CH <-> Monday HW <-> Tuesday CH <->... <-> Sunday HW -> Monday CH Press Set at any time to confirm the setting and return to normal mode. Press Select at any time to confirm the selection. The hour is flashing to indicate that it is the selected item to be adjusted. Press Select to step through the items to be reviewed or adjusted in the sequences below. (Program 1 ON) hour minute (Program 1 OFF) hour minute (Program 2 ON) hour minute (Program 2 OFF) hour minute (Program 3 ON) hour minute (Program 3 OFF) hour minute and then cycle back to (Program 1 ON) Press Set at any time to confirm the setting and return to program selection. Daily program selected Central Heating and Hot Water have independent programmes. 3 different time settings can be programmed for all days. Total 3 settings for TPSE101 and 3 settings for TPSE201. To review or change a setting, press Set in Normal mode to begin programming. The all day and SET PROG are displayed. All other indicators are cleared. All days are flashing to indicate that it is the selected item to be adjusted. 9
10 Press or to select the program set for Weekday/Weekend/CH/HW to be reviewed or adjusted in the sequence below. Weekday CH -> Weekday HW -> Weekend CH -> Weekend HW -> Weekday CH Press Set at any time to confirm the setting and return to normal mode. Press Select at any time to confirm the selection. The hour will be flashing to indicate that it is the selected item to be adjusted. Press Select to select among the items to be reviewed or adjusted in the sequences below: (Program 1 ON) hour minute (Program 1 OFF) hour minute (Program 2 ON) hour minute (Program 2 OFF) hour minute (Program 3 ON) hour minute (Program 3 OFF) hour minute and then cycle back to (Program 1 ON) Press Set at any time to confirm the setting and return to program selection. Operating Mode Selection: In normal operating mode, press Mode to step through the four operating modes: On, Once, Auto, and Off. For each press and release of Mode, the operating mode is cycled in the following sequence: On Once Auto Off On The mode indicator is changed to indicate the selected mode. 10
11 Function of each operating mode: Operating Mode On Once Auto Off Function Continuously on On for 1 period a day, from Program 1 ON to Program 3 OFF Automatic program control Continuously off Fully Pumped and Controlled System (P). Central Heating and Hot Water can be operated independently. Gravity-fed Hot Water System (G). Central Heating cannot be operated without Hot Water. Central Heating (CH) On Once Auto Off Selectable mode for Hot Water (HW) On On, Once On, Once, Auto On, Once, Auto, Off In a poorly controlled gravity circulation hot water system, whenever the boiler comes on to service the heating, there will inevitably be some circulation though the hot water storage tank, which will then heat up. Therefore, whenever the HEATING is ON, the HOT WATER is also ON. It is therefore NOT possible to have independent programmes for heating and hot water hence both CH and HW are programmed together. If you have this type of installation (gravity circulation hot water circuit WITHOUT a hot water control valve), your installer must restrict the Programmer to being a Gravity-fed hot water system (G). 11
12 Temporary Override: Hr+ Program Override When the device is in either Auto, Once or Off mode, press Hr+ to activate the Hr+ program override mode. SET will be displayed, and the mode indicator(s) are lit. For TPSE201, c1 is displayed on the left side for central heating and/or h1 is displayed on the right side for hot water. For TPSE101, 1h is displayed on the right side only. For TPSE201 with P selected, for hot water, press Hr+ to activate the Hr+ program override. For TPSE201 with P selected, for central heating, press Hr+ to activate the Hr+ program override. For TPSE201 with G selected, for central heating, press Hr+ to activate the Hr+ program override. For TPSE101, press Hr+ to activate the Hr+ program override. 12
13 When Hr+ boost mode is activated, the On mode indicator will flash, together with the current mode. e.g. If the current mode is auto mode, the On mode icon is flashing and Auto mode icon remains on. For TPSE101, the display shows 0h, 1h, 2h, or 3h in boost mode. For TPSE201, the display shows C1:h1 Each press of Hr+ will increase the duration of the override by 1 hour. Maximum duration is 3 hours. Pressing until the number rolls back to 0 will disable the Hr+ program override. When Gravity-fed Hot Water System is selected, if the HW duration is shorter than the CH duration, the HW duration will be set to the same duration of CH automatically. Press Set or wait 10 seconds without any key press to begin the period of override and return to the home screen. A channel with override activated is turned on immediately; a channel with override not activated will keep current operational status. The mode indicator(s) will flash at the on position to indicate the temporary override. After 10 seconds, the clock is displayed with the Mode indicator(s) flashing to indicate that the override mode is activated. CH or HW with override activated will return to the previous operating mode at the end of the set duration and the corresponding Mode Indicator will stop flashing. When the Hr+ Program Override mode is activated and the clock is displayed, press Hr+ to review the current settings. SET is displayed, but there is no change of the internal count down timer(s). If there is no further key press within 10 seconds, the clock will be displayed again with the mode indicator(s) flashing. When reviewing the current settings, subsequent press of Hr+ will add 1 hour to the internal count down timer(s). Press Set or wait 10 seconds without further key press to start counting down and return to the home screen. Pressing Hr+ repeatedly until the duration becomes 0 will stop the corresponding channel. When Gravity-fed Hot Water System is selected, pressing of HW Hr+ will set the duration the same as CH. The channel(s) will enter advance override mode when activated as above. The channel(s) return to their previous set mode when user disables the advance override. The channels will function as above whether the program jumper is set to G or P. 13
14 When the channel is in Hr+ program mode, the channel cannot be changed to Advance mode. In G mode (Gravity System), when you use the hot water Hr+ function, they will operate as normal. However, the heating Hr+ function will also bring on the hot water. This is a consequence of the type of system you have, and is normal. The following is an example list of CH programmed operations. Program CH Output Day of week On 06:00 Off 08:00 On 10:00 Off 12:00 On 18:00 Off 22:00 1) In Auto mode The clock is at 11:00 and is executing program 2 (10:00 turn on, 12:00 turn off). Now user presses Hr+ twice to begin 2 hours boost mode. Now, the program 2 will extend 2 hours. i.e. turning off is delayed from 12:00 to 14:00. 2) In Once mode The clock is at 11:00 and is executing program 1: On to Program 3-Off (06:00 turn on, 22:00 turn off). Now user presses Hr+ twice to begin 2 hours boost mode. Now, the Once program will extend 2 hours. i.e. turning off is delayed from 22:00 to 24:00. 3) In Off mode The clock is at 11:00. No channel is on. The user presses Hr+ twice to begin 2 hours boost mode. Now, the channel is turned on and will remain on for 2 hours. i.e. the relay is turned on at 11:00 immediately and then will turn off at 13:00. Advance Override When the device is in either Auto or Once mode, press Adv to activate the Advance Override mode. The next program will be activated with and ADV icon showed together with Auto/Once icon. When the channel is in Advance mode, the channel cannot be changed to Hr+ override mode. In G mode (Gravity System), when you use the hot water ADV function, they will operate as normal. However, the heating ADV will also bring on the hot water. This is a consequence of the type of system you have, and is normal. 14
15 The following is an example list of CH programmed operations. Program CH Output Day of week On 06:00 Off 08:00 On 10:00 Off 12:00 On 18:00 Off 22:00 1) In Auto mode Case 1: Device is in channel ON state. - At 11:00. Device is in Program 2 On and the channel is ON. - The user presses Adv. The relay switches OFF and ADV icon is shown. - At 12:00, device reaches the time of Program 2 Off. The channel is kept OFF but ADV icon is NOT shown. i.e. Advance override is finished. - (Similar when Device in Program 1 Off state) Case 2: Device is in channel OFF state - At 9:00 device is in Program 1 Off state and the channel is OFF. - The user presses Adv. The relay switches ON and ADV icon is shown. device reaches start time of Program2-On. Now the relay is kept On but ADV icon is NOT shown. i.e. Advance override is finished. 2) In Once mode Case 1: Device is in channel ON state. - At 11:00, device is in Program 2 On and the channel is ON. - The user presses Adv. The relay switches OFF and the ADV icon is shown. - At 22:00, the relay is kept OFF but the ADV icon is NOT shown. i.e. Advance override is finished. - At 06:00 of the next day, the device reaches the start time of program 1 On and the channel switches On. Case 2: Device is in channel OFF state - At 09:00, device is in Program 1 Off state but the channel is ON while in Once mode - The user presses the Adv, the channel switches OFF and the ADV icon is shown. - At 22:00, the channel is kept OFF but the ADV icon is NOT shown. i.e. Advance override is finished. - At 06:00 of the next day, the device reaches the start time of program 1 On and the channel switches On. 15
16 Holiday Override In normal mode, press and hold setting mode. for 3 seconds to activate the Holiday Override 1 dy, SET, H PROG indicator, and MODE indicator(s) at off position are displayed, all other indicators are cleared. Day is flashing to indicate that it is ready to be adjusted. Press or to increase or decrease the number of days to turn off the system. Maximum days to turn off the system is 31 days. If the number rolls back to 0, Holiday Override will be disabled. Press and hold or for 2 seconds for values to advance quickly. Press Set or wait 3 seconds without further key presses to start counting down. SET will disappear and both CH and HW will be turned off immediately. Press for 3 seconds again to de-activate the Holiday Override mode. The Programmer returns to the normal mode. The Programmer counts each pass through midnight as a day. LCD Backlight LCD backlight is activated when or any key is pressed. The backlight will be turned off 10 seconds after the last key press. LCD backlight will not operate on battery back-up power only. LCD backlight is illuminated when changing the Clock, Program, and Temporary Override Temperature settings. AC Monitoring Mains power is monitored continuously. If the mains fails, output will be turned off immediately, all the functions will be paused, only the clock and mode icon is displayed, all other indicators will be cleared. 16
17 The TPSE101/TPSE201 will return to Normal mode after mains power is resumed. Backup Battery The thermostat is shipped from the factory with the battery installed. To stop it from discharging during shipment and storage, the battery is disconnected by a jumper on the back of thermostat. This jumper (Memory On) must be moved before the thermostat is mounted on the wall. The battery that retains the time and date during a power failure, without mains power, should last up to one year. If the time and date need to be reset after a power failure, this is an indication that the battery needs to be replaced. To replace the battery, open the back of the Thermostat case using a screw driver. Remove the screw marked by a red tab (see image) and carefully lift off the top circuit board. Socket Screw Remove the old battery from its clip. Insert a new battery (type CR2032 or equivalent) observing the correct polarity. Carefully re-position the top circuit board pressing gently back in to place taking care to engage the pins from the lower circuit board into the socket. Re-fit the rear casing. 17
18 Control Patterns Control Status Indication - LED output indicator is illuminated whenever the output is on. TPSE101 TPSE201 BOSS is a registered trademark of the Travis Perkins Group Registered Office: Travis Perkins plc, Lodge Way House, Lodge Way, Harlestone Road, Northampton. NN5 7UG 18
Thank you for purchasing this product. If installing for someone else, please ensure that the instructions are handed to the householder.
Instruction Manual TPST501 (569568) - BOSS TM Universal mable Room Thermostat (Wired) (7 day, 5/2 day and 24 hour programme options) Thank you for purchasing this product. If installing for someone else,
More informationThank you for purchasing this product. If installing for someone else, please ensure that the instructions are handed to the householder.
Instruction Manual TPSRF51 (957707) - BOSS TM Universal RF Programmable Room Thermostat (Wireless) (7 day, 5/2 day and 24 hour programme options) Thank you for purchasing this product. If installing for
More information7 Day Digital Programmer
7 Day Digital Programmer Cat. No. TRT034 Operating & Installation Instructions What is a programmer?...an explanation for householders Programmers allow you to set On and Off time periods. Some models
More information7 Day Digital Programmer 3 Channel Surface Mount
7 Day Digital Programmer 3 Channel Surface Mount Model: TRT038N Installation & Operating Instructions 1. General Information These instructions should be read carefully and retained for further reference
More information24 Hour & 7 Day Digital Immersion Heater Timeswitch Article
24 Hour & 7 Day Digital Immersion Heater Timeswitch Article 943 320 Large 24 hour clock/programme display. Tough flame retardant bezel 1 Enables clock time to be changed. Used to review and change timer
More informationLP20. Installation & User Guide. Dual Channel Programmer. Part number 25039DR
Dual Channel Programmer Part number 25039DR! For GREENSTAR CDi, GREENSTAR i JUNIOR and GREENSTAR Si MODELS also GREENSTAR i SYSTEM and GREENSTAR CDi SYSTEM MODEL(only when used with the optional integral
More informationSCS318. User Instructions. SCS318 comprising of SCS317 7 Day Wireless Programmable Room Thermostat and SSR303 Receiver
SCS318 User Instructions SCS318 comprising of SCS317 7 Day Wireless Programmable Room Thermostat and SSR303 Receiver Programmable room thermostats are widely recognised as one of the best ways in which
More informationLifestyle. Dual Channel Programmer. for heating AND hot water. Installation and User Instructions DUAL CHANNEL ISSA
Lifestyle Dual Channel Programmer for heating AND hot water Installation and User Instructions DUAL CHANNEL 06490197001 ISSA INSTALLATION INSTRUCTIONS PLEASE NOTE: INSTALLATION MUST ONLY BE CARRIED OUT
More informationTDDFM14 OWNER S MANUAL
TDDFM14 OWNER S MANUAL Table of Contents 3 Installation Features System Selector Switches 6 10 Connecting Wires and Mounting Thermostat 10 Operation (Programming) Programming/Setting Clock Personal Program
More informationComfort System T-32-P Universal Thermostat. Operation Manual
TM Comfort System T-32-P Universal Thermostat TM O Operation Manual Your new Comfort System T-32-P Universal Thermostat has been built using the highest quality components and design currently available.
More informationDigital Time Switch. Installation & Operating Instructions
Digital Time Switch Model: NTT06 24 Hour General Purpose Digital Timer Model: NTT07 7 Day General Purpose Digital Timer Installation & Operating Instructions 1 1. General Information These instructions
More informationULTRA-VANSTAT WIRELESS PROGRAMMABLE THERMOSTAT FOR CARAVANS
ULTRA-VANSTAT WIRELESS PROGRAMMABLE THERMOSTAT FOR CARAVANS NOT SUPPLIED PROGRAMMER / TRANSMITTER RECEIVER THIS DOMESTIC STYLE WIRELESS 7 DAY PROGRAMMABLE HEATER CONTROL REPLACES THE TRUMA ULTRAHEAT SWITCH
More information7 Day Digital Time Switch
7 Day Digital Time Switch Model: NTT08 Installation & Operating Instructions 1 1. General Information These instructions should be read carefully and retained for further reference and maintenance. 2.
More information1 Channel Multi-Purpose Programmer User Instructions
ES1247B 1 Channel Multi-Purpose Programmer User Instructions Thank you for choosing ESi Controls. All our products are tested in the UK so we are confident this product will reach you in perfect condition
More informationRadio Thermostat Clock
Radio Thermostat Clock Installation & User Instructions Part number: ZU0800009 80.10.1375.7_feeling_ks_fer_en.indd 1 18.04.2013 11:25:42 Table of contents Safety instructions... 3 Product details... 4
More informationRAMMER INSTRUCTION MANUAL FITTING & OPERATING INSTRUCTIONS NEL PROGRAMMER. NSTAR Si MODELS
RAMMER NEL PROGRAMMER NSTAR Si MODELS INSTRUCTION MANUAL FITTING & OPERATING INSTRUCTIONS .,,' CONTACT INFORMATION MANUAL INFORMATION WORCESTER BOSCH: TECHNICAL: 08705266241 SERVICE: 08547 256206 SPARES:
More informationCP027. User Operating Instructions. Two Channel Central Heating and Hot Water Programmer
CP027 User Operating Instructions Two Channel Central Heating and Hot Water r The CP027 two channel programmer gives independent control over hot water and heating with up to 3 ON/ settings for each day
More informationProgrammable Room Thermostat With RF
Salus RT500RF Manual:89 10/7/10 23:43 Page 1 Programmable Room Thermostat With RF Instruction Manual Model No RT500RF 2 Salus RT500RF Manual:89 10/7/10 23:43 Page 2 PRODUCT COMPLIANCE This product complies
More information16 Amp Electronic 24 Hour/7 Day Time Controller
16 Amp Electronic 24 Hour/7 Day Time Controller Model: ELU56 Installation & Operating Instructions 1 1. General Information These instructions should be read carefully and retained for further reference
More informationDigital Economy Seven Programmer
Digital Economy Seven Programmer Model: TRTD7N White Installation & Operating Instructions 1. General Information These instructions should be read carefully and retained for further reference and maintenance.
More informationACT 10 Digital Keypad Operating & Installation Instructions This manual is found at
ACT 10 Digital Keypad Operating & Installation Instructions 18-00001 This manual is found at www.eaglesecuritysolutions.co.uk Installation Notes Always remember to factory default the controller before
More informationRT505TX Programmable. The RT505TX can be used with any of these receivers RXBC605 RXWBC605 RXVBC605 RXST MHz
RT505TX T RT505 T505TX TX RT505TX RT505TX RT505TX 5TX Programmable Room o Thermostat RXBC605 RXRT505 RXWBC605 RXST625 RXVBC605 The RT505TX can be used with any of these receivers 868MHz RT505TX RT505TX
More informationST9100C User Guide. Features
Features Easy to use slider and buttons combined with LoT Technology and an OK button, allows you to confi rm changes and stay in control. PLEASE RESPECT YOUR ENVIRONMENT! Take care to dispose of this
More informationDIGITAL TIME SWITCH 7 DAY WITH INPUT DGU100A DGUM100A DGLC100A DGLC200A
INSTRUCTION MANUAL LISTED DIGITAL TIME SWITCH 7 DAY WITH INPUT DGU100A DGUM100A DGLC100A DGLC200A FOR TECHNICAL SUPPORT: 888.500.4598 A DIVISION OF NSi INDUSTRIES, LLC USA 800.321.5847 www.nsiindustries.com
More informationCP017 USER OPERATING INSTRUCTIONS. Single Channel Timeswitch
CP017 USER OPERATING INSTRUCTIONS Single Channel Timeswitch The CP017 timeswitch will allow up to 3 ON/ settings per day for each day of the week and has a 1 hour manual boost and advance button to temporarily
More informationChannelPlus H17XL Series 2 User Operating Instructions
ChannelPlus H17XL Series 2 User Operating Instructions Single Channel 7 day Timeswitch The ChannelPlus family of electronic programmers offer a range of advanced features coupled with simplified menu driven
More informationJunior Max (JR Max ) Controller
Get more done TM Junior Max (JR Max ) Controller stations Operating Instructions Thank you for purchasing this advanced, highly featured Irritrol Junior MAX controller. The Junior MAX is the latest addition
More informationTP7001 Range Electronic 7 Day Programmable Room Thermostat. Danfoss Heating. Installation Guide
TP7001 Range Electronic 7 Day Programmable Room Thermostat Danfoss Heating Installation Guide For a large print version of these instructions please call Marketing on 0845 121 7400. Certification Mark
More informationXTM72 Exerciser Timer Module
Capricorn Controls DA01XTM1-1 Data & Application Note Page 1 of 6 XTM72 Exerciser Timer Module Genset Controls - Timers - Monitors - Trips - Battery Charging - Spares & Accessories - Custom Products This
More informationServicePlus S17R Series 2 User Operating Instructions
ServicePlus S17R Series 2 User Operating Instructions Single Channel Timeswitch The Horstmann ServicePlus S17R timeswitch will allow up to 3 ON/ settings per 24 hours on a weekly schedule and has a 1 hour
More informationWaterline Room Controller - Type WLCT3
INSTRUCTIONS Introduction Room controller type WLCT3 is a 4-event programmable controller used to control areas with underfloor heating or special features of a WLM3 installation. The standard WLCT3 can
More informationST625TX Digital Room Thermostat
ST625TX Digital Room Thermostat RXBC605 RXST625 RXWBC605 RXVBC605 RXRT505 The ST625TX can be used with any of these receivers 868MHz PRODUCT COMPLIANCE This product complies with the essential requirements
More informationEN Wireless programmable thermostat
EN Wireless programmable thermostat Contents 1. Installation... 31 2. Description... 32 EN 3. Wireless association... 33 4. Configuration... 34 CF01 - Correcting the temperature measured... 34 CF02 - Temperature
More informationFN:4181NX_M1.DOC MC4181NX MASTER CLOCK MC4181NX
FN:4181NX_M1.DOC MC4181NX MASTER CLOCK MC4181NX TABLE OF CONTENTS 1.0 INTRODUCTION 2.0 SPECIFICATIONS 3.0 INSTALLATION 4.0 GETTING STARTED 4.1 The Auto-Prompt Display 4.2 The Cursor, Entering Data 4.3
More informationOverview: Specifications: Installation Instructions:
Overview: The SignalGuys.com Start/Stop Work Timer PT724A is an extremely versatile 24 Hour 365 Day Event Timers designed to support a wide range of applications. Such applications include: Start/Stop
More informationXTM72E & F Real-Time Clock Modules
Capricorn Controls Ltd Data & Application Notes Page 1 of 8 XTM72E & F Real-Time Clock Modules Originally designed to compliment our wide range of Gen-Set controls, these DC powered Real-Time-Clocks have
More informationDTS400B - DZS400BP 3/9/07 10:14 AM Page 1
DTS400B - DZS400BP 3/9/07 10:14 AM Page 1 18 DTS400B - DZS400BP 3/9/07 10:14 AM Page 3 TABLE OF CONTENTS Section Page Capabilities and Features.......... 1 Installation Instructions............ 2 Instructions
More informationFN:4181M5.DOC MC4181N SERIES MASTER CLOCKS MC4181N
FN:4181M5.DOC MC4181N SERIES MASTER CLOCKS MC4181N TABLE OF CONTENTS 1.0 INTRODUCTION 2.0 SPECIFICATIONS 3.0 INSTALLATION 4.0 GETTING STARTED 4.1 The Auto-Prompt Display 4.2 The Cursor, Entering Data 4.3
More informationS-Series Digital Thermostat. Instruction Manual Model No ST620RF
S-Series Digital Thermostat Instruction Manual Model No ST620RF 2 PRODUCT COMPLIANCE SALUS Controls Plc hereby declares that the radio equipment type 868Mhz is in compliance with Directives 1999/5/EC,
More informationOperation Guide 6022 ENGLISH
Operation Guide 6022 Control Panel Reset TEMP UP SET CLOCK PROG2 TIME SET Heat/Cool Mode Switch Fan Switch Target Temp TIME SLOT Time EPA PROGRAM COPY HOLD REVIEW FILTER TEMP DOWN Battery Compartment Statement
More informationDial Ezy INSTRUCTION MANUAL N IRRIGATION CONTROLLER 4 or 6 Station Model SUITABLE FOR INDOOR USE ONLY OTHERWISE WARRANTY IS VOID
Dial Ezy IRRIGATION CONTROLLER 4 or 6 Station Model INSTRUCTION MANUAL SUITABLE FOR INDOOR USE ONLY OTHERWISE WARRANTY IS VOID N10372 Table Of Contents Features 1 Glossary 2 Programming Instructions Introduction
More informationInstallation & Programming Manual. Please read before using this timer.
Installation & Programming Manual Please read before using this timer. Warning! This unit operates using two fresh, high-quality AA alkaline batteries.batteries must be installed for unit to operate. USE
More informationSSPT724A Timer Quick Start Guide
SSPT724A Timer Quick Start Guide Open timer enclosure and remove mounting parts and instructions. When ready to program the timer, plug in timer to 120 Volt Ac power receptacle Press the SET button to
More informationUser s Guide. GreenKeeper 212 Features: Automatic Sprinkler System Controller
RR User s Guide Automatic Sprinkler System Controller PROGRAMS A B C MANUAL START ON OFF NEXT GreenKeeper 212 Features: Easily Expandable Up To 12 Stations with 2-Station Plug-in Modules Watering Programs
More informationOUTDOOR IRRIGATION CONTROLLER LDC-6 LDC-11. User Manual
OUTDOOR IRRIGATION CONTROLLER LDC- LDC- User Manual TABLE OF CONTENTS Table of Contents Introduction The Controller Introduction to Programming Watering Schedules Water Budgeting and Seasonal Adjustment
More information7 Day Digital Light Switch with Optional Dusk Start
7 Day Digital Light Switch with Optional Dusk Start Model: ZV700B Installation & Operating Instructions 1 1. General Information These instructions should be read carefully and retained for further reference
More informationInserting the batteries. Basic settings of the remote control
Inserting the batteries Procedure prior to first use or when changing batteries Remove the back plate to expose the battery tray. Insert 2 x AA 1.5V alkaline batteries. Ensure the polarity of the batteries
More informationWiFi Controlled Fused Spur Time Switch
WiFi Controlled Fused Spur Time Switch Model: FSTWiFi WiFi Controlled Fused Spur Model: FSTWiFiTGV WiFi Controlled IP66 Fused Spur Installation & Operating Instructions 1 1. General Information These instructions
More informationtalento 800 Series 365-Day One, Two and Four Circuit Electronic Time Controls Functional Description
Operating Instructions talento 800 Series 365-Day One, Two and Four Circuit Electronic Time Controls The talento 800 controls are one, two and four electronic time switches with 365-day, 7-day and 24-hour
More informationSBL /SBLG Series Wireless Clock
Installation Manual V8.3 SBL /SBLG Series Wireless Clock Current as of August 2018 The Sapling Company, Inc. SBL and SBLG Series Wireless Clocks Table of Contents Table of Contents 2 Important Safety Instructions
More information2 2 Relay outputs. M DIN W72 H7mm. LE7 Weekly/Yearly timer
LE7M-2 W72 H72mm, Weekly/Yearly Timer Features Easy to check and change the program setting Customizable weekly or yearly unit time setting and control by user Includes daylight saving time function Built-in
More information1 Overview. 2 Specifications. 3 Installation Instructions. HPT724 Programmable LCD Timer PN 52765:A 1/25/06 ECN Product Installation Document
Honeywell 12 Clintonville Road Northford, CT 06472 http://www.honeywellpower.com HPT724 Programmable LCD Timer PN 52765:A 1/25/06 ECN 05-637 1 Overview Product Installation Document The Honeywell HPT724
More informationTimer Modules. EL11 24 Hour Module EL17 7 Day Module. Installation & Operating Instructions
Timer Modules EL11 24 Hour Module EL17 7 Day Module Installation & Operating Instructions 1 1. General Information These instructions should be read carefully and retained for further reference and maintenance.
More informationTwo (2) Channel 365 Day 24 Hr. Timer/Controllers
Two (2) Channel 365 Day 24 Hr. Timer/Controllers Models include: PT2724 - Timer module PT2724E - Timer module in enclosure Installation Guide Rev. 020317 More than just power. TM Overview: Altronix PT2724/PT2724E
More informationMRX1 1. Getting to know your MRX1 wireless controller
Please read this guide carefully and retain for future use and maintenance. MRX1 1. Getting to know your MRX1 wireless controller Multizone Wireless Controller Installation and User Guide The MRX1 Multizone
More informationUSER & ENGINEER INSTRUCTION MANUAL
USER & ENGINEER INSTRUCTION MANUAL BENSON CP4 USER INSTRUCTIONS CONTENTS PAGE SUBJECT PAGE No. Contents Page... 1 CP4 Basic Setting Guide... 2-3 Standard Terms... 4 Normal RUN Mode... 4 Override... 5
More informationWeekly Time Switch. Rated time Time setting range Time division 24 hrs x 7 days 00:00 to 23:59 1min
Weekly Time Switch Easy Programming with Large LCD Display and Interactive Functions Programming for 24 hrs x 7 days using just five switches. Sixteen program steps available. Power supply freely selectable
More informationElectronic 1-Circuit 7-Day Time Switch With 100-Hour Backup
MODELS ET2705C, ET2705CR, ET2705CP Installation and Setup Instructions Electronic 1-Circuit 7-Day Time Switch With 100-Hour Backup WARNING Risk of Fire or Electric Shock Disconnect power at the circuit
More informationSECURITRON PRIME TIME MODEL DT-7 INSTALLATION AND OPERATING INSTRUCTIONS
Securitron Magnalock orp. www.securitron.com ASSA ABLOY, the global leader Tel 800.624.5625 techsupport@securitron.com in door opening solutions SEURITRON PRIME TIME MODEL DT-7 INSTALLATION AND OPERATING
More informationOperating Manual. Basic Control BC16. two-channel for eco moon
Operating Manual Basic Control BC16 two-channel for eco moon Dear Customer, Thank you for choosing a WALTRON daytime lighting controller. Your daytime lighting controller is a high-quality product that
More informationPT Two (2) Channel 365 Day 24 Hr. Timer/Controller
PT2724 - Two (2) Channel 365 Day 24 Hr. Timer/Controller Overview: This unit is an extremely versatile two channel 365 Day 24 Hour Timer / Controller designed to support a wide range of applications. Such
More informationREGO Start&Go USER MANUAL
REGO Start&Go USER MANUAL Version 0 Rev. B of 03/03/16 Page 1 of 15 Introduction The purpose of the manual is to describe all of the steps required to commission and correctly operate the REGO Start&Go
More informationINSTALLATION INSTRUCTIONS FOR. MODEL 2230LED
INSTALLATION INSTRUCTIONS FOR MODEL 2230LED www.sportablescoreboards.com 1 Table of Contents MODEL 2230LED... 3 8 X 4 INDOOR SCOREBOARD... 3 THE SCOREBOARD SYSTEM SHOULD INCLUDE THE FOLLOWING PARTS:...
More informationEZ Pro Jr. Installation and Programming Guide For EZ Pro TM Jr. models:
EZ Pro Jr. Installation and Programming Guide For EZ Pro TM Jr. models: 8304 8374 8306 8376 8309 8379 8312 8382 THANK YOU for purchasing the EZ Pro Jr. 8300 Series electronic irrigation controller. The
More informationSafety Information. Camera System. If you back up while looking only at the monitor, you may cause damage or injury. Always back up slowly.
Table of Contents Introduction...3 Safety Information...4-6 Before Beginning Installation...7 Installation Guide...8 Wiring Camera & Monitor...9-10 Replacement Installation Diagram...11 Clip-On Installation
More informationSTX Stairs lighting controller.
Stairs lighting controller STX-1795 The STX-1795 controller serves for a dynamic control of the lighting of stairs. The lighting is switched on for consecutive steps, upwards or downwards, depending on
More informationINSTALLATION & OPERATING INSTRUCTIONS SINGLE/TWO CHANNEL 24HR/7 DAY TIMER. Cat No. TR671/TR672TOP
SINGLE/TWO CHANNEL 24HR/7 DAY TIMER Cat No. TR671/TR672TOP INSTALLATION & OPERATING INSTRUCTIONS TR671/TR672TOP 24Hr/7 Day 1/2 Channel Digital TOP Module (without Power Supply) Please read the instructions
More informationTimer Modules. MEU11 24 Hour Module, MEU17 7 Day Module (Without Housing)
Timer Modules MEU11 24 Hour Module, MEU17 7 Day Module (Without Housing) EMU11 24 Hour Module, EMU17 7 Day Module (With Housing Giving panel mounting facility) Installation & Operating Instructions 1 1.
More informationEC7000, EC7004 and EC7005 Single Channel Electronic Time Controls
http://waterheatertimer.org/paragon-timers-and-manuals.html#ec Replacement timer http://waterheatertimer.org/intermatic-et-series-timers-and-manuals.html#et1700 EC7000, EC7004 and EC7005 Single Channel
More informationElectronic 2-Circuit 24-Hour Time Switch With 100-Hour Backup
MODELS ET2125C, ET2125CR, ET2125CP Installation and Setup Instructions Electronic 2-Circuit 24-Hour Time Switch With 100-Hour Backup WARNING Risk of Fire or Electric Shock Disconnect power at the circuit
More informationUser Manual CC DC 24 V 5A. Universal Control Unit UC-1-E. General Information SET. Universal Control Unit UC-1 Of Central Lubrication PAUSE CONTACT
Universal Control Unit UC-1-E User Manual General Information Universal Control Unit UC-1 Of Central Lubrication CC DC 24 V 5A / M 15 SL /MK 31 M Z 30 General Information Contents Universal Control Unit
More informationINSTALLATION INSTRUCTIONS FOR
INSTALLATION INSTRUCTIONS FOR MODEL 2240LED www.sportablescoreboards.com 1 Table of Contents 8 X 7 INDOOR SCOREBOARD... 3 THE SCOREBOARD SYSTEM SHOULD INCLUDE THE FOLLOWING PARTS:... 3 INSTRUCTIONS FOR
More informationRD RACK MOUNT DIMMER OWNERS MANUAL VERSION /09/2011
RD - 122 RACK MOUNT DIMMER OWNERS MANUAL VERSION 1.3 03/09/2011 Page 2 of 14 TABLE OF CONTENTS UNIT DESCRIPTION AND FUNCTIONS 3 POWER REQUIREMENTS 3 INSTALLATION 3 PLACEMENT 3 POWER CONNECTIONS 3 OUTPUT
More informationMaster Time Clock MTC Users Manual
Master Time Clock MTC-6000 Users Manual Midwest Time Control Phone (972)987-4408 Toll Free (888)713-0373 FAX (877)720-9291 www.midwest-time.com sales@midwest-time.com TABLE OF CONTENTS TOPIC PAGE GENERAL
More informationNixie Clock Type Quattro'
Assembly Instructions And User Guide Nixie Clock Type Quattro' - 1 - Issue Number Date REVISION HISTORY 2 8 Sept 2012 Errors corrected 1 27 July 2012 New document Reason for Issue - 2 - 1.1 Nixie Quattro
More information1. General Information:
1. General Information: 12 hour display (back lit during programming) Economy light Boost button (illuminated in use) 1 Off/Timed switch Contents: TRTD7 Economy programmer. Mounting kit. Instructions.
More informationUser s Guide. ECx Features: Automatic Sprinkler System Timer
TM User s Guide Automatic Sprinkler System Timer RAIN DELAY SEAS ADJUST ZE RUN TIMES AUTO / TIME / DAY WATERING DAYS PROGRAM TIMES PROGRAMS MANUAL NEXT ECx Features: Expandable Up To 8 Zones With Plug-In
More informationModel IQ4-PC User Manual Revision Date:
Basic Specifications Supply Volts 230V 50/60Hz ±15% 115V 50/60Hz ±15% 24V DC (isolated) ±15% Power Consumption Max. 3VA (IQ4-PC-R0) Max. 6VA (IQ4-PC-R2-PSI24-RT) Operating Temperature -5 ~ +60 C Operating
More informationInstallation & Operation Manual. BEC PM1 Controller Time/Flow/Volume Controller. Water Control Solutions
Installation & Operation Manual BEC PM1 Controller Time/Flow/Volume Controller Water Control Solutions Table of Contents Introduction 4 Chapter 1 Technical Data and I/O Connections 6 DC Solenoid 6 Power
More informationInstallation and Operation Manual. YMP Series Signal Programmer
Installation and Operation Manual YMP Series Signal Programmer February 2006 YMP Series Clock/Signal Programmer Installation and Operation Manual YMP Series Clock/Signal Programmers YMP YMP02 YMP04 YMP06
More informationValcom Wired Digital Clock
Installation Manual V10.5 Valcom Wired Digital Clock V-D11025B, V-D11040B, V-D2425B, V-D2440B, V-2425B-6, and V-D2440B-6 Current as of February 2017 Valcom, Inc. Valcom Digital Series 2-Wire and 3-Wire
More informationVLC-3 USER'S MANUAL. Light Program Controller. M rev. 04 K rev. 00 & ( ( 5, 352*5$0 1 : $ 2 ' 6(77,1*6 )81&7,216
Light Program Controller VLC-3 USER'S MANUAL +50,1 +50,1 1 : $ ' 2 7. 6 8 ' 5, 7 6 6. $ ( 3 352*5$0 0,16(& )81&7,216 6(77,1*6 & 8 5 5 ( 1 7 3 ( 5, 2 ' M 890-00189 rev. 04 K 895-00406 rev. 00 GENERAL...
More informationINSTALLATION INSTRUCTIONS MODEL VSBX-236 LED 3 X 8 INDOOR SCOREBOARD
1 INSTALLATION INSTRUCTIONS MODEL VSBX-236 LED 3 X 8 INDOOR SCOREBOARD NOTE TO INSTALLERS: PLEASE RETURN THIS MANUAL TO THE INDIVIDUAL IN CHARGE OF THE SCOREBOARD UPON COMPLETION OF INSTALLATION. The scoreboard
More informationInstruction Manual. Universal Flow Controller Model 261 / 261-EC-01
Universal Flow Controller Model 261 / 261-EC-01 Instruction Manual Type ARS 261-EC 01 Art.-no: 82212264 Table of Contents 1. Safety Instructions 2. Product ID - Dimensions 3. Function Description 4. Installation
More informationBattery Operated Controllers
ALL SEASONAL ADJUSTMENT 1 Battery Operated Controllers Owner s Manual and Programming Instructions RUN PRG SENSOR BYPASS SYSTEM OFF CURRENT TIME/DAY ACTIVE MANUAL-ALL STATIONS START TIMES MANUAL-ONE STATION
More informationHow do I delete a. Remove Here
2 3 4 5 6 Q. A. Frequently Asked Questions Please read before calling Customer Service. Does your system run repeatedly? Q. How do I delete a start time? Q. Where do I leave the LARGE dial? Do NOT set
More informationSolid-State Digital Timer
Solid-State Digital Timer 1/16 DIN, Digital-Set Timer with 0.1 Second to 9,990 Hours Range 8 field-selectable operation modes Universal AC/DC supply voltage timers available Operations include ON-delay,
More informationSceneStyle2 User Guide
SceneStyle2 User Guide Mode Lighting (UK) Limited. The Maltings, 63 High Street, Ware, Hertfordshire, SG12 9AD, UNITED KINGDOM. Telephone: +44 (0) 1920 462121 Facsimile: +44 (0) 1920 466881 e-mail: website:
More informationConference Speaker Timing System. Operating Instruction Manual
Conference Speaker Timing System Operating Instruction Manual December 2006 Table of Contents Overview... 2 The Master Station... 2 The Slave Station... 2 Warning Lights... 3 Radio-Controlled Clock...
More informationMaster Clock Controller. User Guide. pyramidtimesystems.com
Master Clock Controller User Guide pyramidtimesystems.com TABLE OF CONTENTS TABLE OF CONTENTS... PRODUCT OVERVIEW... FEATURES... 3 CONTENTS... 4 WALL MOUNTING... 5 INSTALLATION... 6 PROGRAMMING... 7-8
More information24Hour/7Day Electronic Timeswitch
24Hour/7Day Electronic Timeswitch Model: TG77 Installation & Operating Instructions Increments programming steps and when held pressed for approximately 4 seconds initiates clock set mode Override to next
More informationST8-WiFi Timer. Installation Guide and Operations Manual. English MIN M D YYYY
ST8-WiFi Timer Installation Guide and Operations Manual AM M D YYYY English Contents ST8-WiFi Timer Installation Guide and Operations Manual Introduction Welcome to Rain Bird... 1 Timer Features... 1 Controls
More informationTORK DGU100/DGUM100 7 DAY DIGITAL TIME SWITCH INSTALLATION AND OPERATING INSTRUCTIONS READ INSTRUCTIONS CAREFULLY BEFORE SETTING UNIT
TORK DGU100/DGUM100 7 DAY DIGITAL TIME SWITCH INSTALLATION AND OPERATING INSTRUCTIONS READ INSTRUCTIONS CAREFULLY BEFORE SETTING UNIT INSTALLATION UNIT IS TO BE INSTALLED BY A LICENSED ELECTRICIAN 1. To
More informationUser s Guide. ECx Features: Automatic Sprinkler System Timer
User s Guide Automatic Sprinkler System Timer ECx Features: Expandable Up To 8 Zones With Plug-In Modules Watering Programs With: - Calendar and Interval Days - 1 Min. to 4 Hrs. Valve Run Time - 4 Start
More informationTORK DGS180 DIGITAL SIGNAL TIMER 24 HOUR WITH DAY OMIT
TORK DGS180 DIGITAL SIGNAL TIMER 24 HOUR WITH DAY OMIT READ INSTRUCTIONS CAREFULLY BEFORE SETTING UNIT FEATURES Single channel signal timer with 2 duration settings 288 signals in 5 minute increments 24
More information2 Hour Electronic Boost Timer
2 Hour Electronic Boost Timer Model No. TGBT4 Installation & Operating Instructions 1. General Information These instructions should be read carefully and retained for further reference and maintenance.
More informationMAKING MODERN LIVING POSSIBLE. TS715Si Electronic Single Channel Timeswitch with Service Interval Timer. Installation Guide.
MAKIG MODER LIVIG POSSIBLE TS715Si Electronic Single Channel Timeswitch with Service Interval Timer Danfoss Heating Installation Guide For a large print version of these instructions please call Marketing
More informationWeekly Timer. Mounting track 50 cm (1.64 ft) length PFP-50N 1 m (3.28 ft) length PFP-100N
Weekly Timer 1/4 DIN Size Timer Features Prompted Programming and Large LCD Display 24 hours x 7 days programming using just 5 switches 16 program steps and cycle operation Two independent 15 A control
More informationTelemetry Receiver Installation Guide
BBV Telemetry Receiver Installation Guide Models covered Rx200 Building Block Video Ltd., Unit 1, Avocet Way, Diplocks Industrial Estate, Hailsham, East Sussex, UK. Tel: +44 (0)1323 842727 Fax: +44 (0)1323
More informationMaster Clock Controller. User Guide. pyramidtimesystems.com
Master Clock Controller User Guide pyramidtimesystems.com TABLE OF CONTENTS TABLE OF CONTENTS... PRODUCT OVERVIEW... FEATURES... 3 CONTENTS... 4 WALL MOUNTING... 5 INSTALLATION... 6 PROGRAMMING... 7-8
More information