TECHNICAL MANUAL OPERATOR'S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
|
|
- Avis Gibson
- 6 years ago
- Views:
Transcription
1 TM &P-5 TECHNICAL MANUAL OPERATOR'S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST) FOR PLUG-IN, LOW FREQUENCY (SPECTRUM ANALYZER) PL-1387/U (HP-8556A) (NSN ) HEADQUARTERS, DEPARTMENT OF THE ARMY 27 APRIL 1983
2 This manual contains copyrighted material reproduced by permission of the Hewlett-Packard Company. All rights reserved. TM &P-5 TECHNICAL MANUAL HEADQUARTERS DEPARTMENT OF THE ARMY No & P-5 Washington, DC, 27 April 1983 OPERATOR'S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL, INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS FOR PLUG-IN, LOW FREQUENCY (SPECTRUM ANALYZER) PL-13871U (HP-8556A) (NSN ) REPORTING ERRORS AND RECOMMENDING IMPROVEMENTS You can improve this manual. If you find any mistakes, or if you know of a way to improve the procedures, please let us know. Mail your letter or DA Form 2028 (Recommended Changes to Publications and Blank Forms) directly to: Commander, US Army Communications-Electronics Command and Fort Monmouth, ATTN: DRSEL-ME-MP, Fort Monmouth, NJ In either case a reply will be furnished directly to you. TABLE OF CONTENTS SECTION O INTRODUCTION O-1 Scope...O-1 O-2 Index of Publications......O-1 O-3 Maintenance Forms, Records, and Reports...O-1 O-4 Reporting Equipment Improvement Recommendations (EIR)...O-1 O-5 Administrative Storage...O-1 O-6 Destruction of Army Electronic Materiel...O-1 i
3 TABLE OF CONTENTS Section I GENERAL INFORMATION Introduction Instruments Covered by Manual Description Accessories Supplied Equipment Required but not Supplied IF Sections Display Sections Compatibility Operating Accessories Test Equipment Required Warranty II INSTALLATION Initial Inspection Mechanical Check Electrical Check DELETED Preparation for Use Shipping Configuration Power Requirements Power Cable Operating Environment Interconnections Storage and Shipment Original Packaging Other Packaging Materials III OPERATION Introduction Panel Features Operator's Checks Operating Considerations RF Input Amplitude Ranges First Mixer Balance Operating Instructions Setting the Frequency Scan Adjusting the Amplitude Scale Using the Tracking Generator Variable Persistence and Storage Functions Photographic Techniques IV PERFORMANCE TESTS 4-1. Introduction Equipment Required Operational Adjustments Front Panel Checks Test Sequence Tracking Generator Amplitude Marker Accuracy Scan Width Accuracy Center Frequency Accuracy Frequency Response Average Noise Level Residual Responses Spurious Responses Residual FM Noise Sidebands Input Level Control and Gain Compression Tracking Generator Spectral Purity ii Section V ADJUSTMENTS Introduction Test Equipment Required Posidriv Screwdrivers Blade Tuning Tools HP 11592A Service Kit Extender Cable Installation Factory Selected Components Related Adjustments Voltage Checks Pre-Attenuator Adjustments: COMP and C IN MHz Local Oscillator Adjustment: A6T Mixer Balance Adjustments: C, R and Z Tracking Generator Adjustments: AMPL ADJ and FLATNESS ADJ Frequency Calibration Adjustment: OFFSET ADJ, 300 khz ADJ, and ZERO ADJ A 47 MHz LO Adjustment VI REPLACEABLE PARTS Introduction DELETED VII MANUAL CHANGES DELETED VIII SERVICE Introduction Theory of Operation Recommended Test Equipment Troubleshooting General Service Information Part Location Aids Factory Selected Components Diagram Notes Servicing Aids on Printed Circuit Boards Circuit Board Extender General Service Hints Etched Circuits Etched Conductor Repair Component Replacement Logic Circuits and Symbols Basic AND Gate (Positive Logic) Basic OR Gate (Positive Logic) Truth Tables Logic Inversion Binary Circuits and Symbols Reset-Set (RS) Flip-Flop The RST Flip-Flop Clocked JK Flip-Flop JK Master/Slave Flip-Flop Preset and Clear Operational Amplifiers Circuits and Symbols Troubleshooting Dial Calibration Procedure
4 LIST OF ILLUSTRATIONS Figure 1-1 Model 8556A Spectrum Analyzer LF Section with 8552B IF Section and 141T Display Section Instrument Identification Typical Spectrum Analyzer Resolution Typical Spectrum Analyzer Distortion Products HP 11592A Service Kit LF Section and IF Section Interconnections Front Panel Features Operational Adjustments Typical Frequency Response Measurement (in 50 Ohms) Typical Amplifier Frequency Response Measurement (in 600 Ohms) using a Frequency Counter Tracking Generator Test Setup Marker Accuracy Test Setup Scan Width Accuracy Display Frequency Response Test Setup Average Noise Level Display Residual Responses Display Spurious Responses Test Setup Intermodulation Distortion Products Display Residual FM Test Setup Residual FM Display Noise Sidebands Test Setup Noise Sidebands Display Input Level Control and Gain Compression Test Setup Tracking Generator Spectral Purity Test Setup Voltage Checks Test Setup Pre-Attenuator Adjustment Test Setup MHz Local Oscillator Adjustment Test Setup Mixer Balance Adjustments Test Setup Tracking Generator Adjustment Test Setup Frequency Calibration Adjustment Test Setup MHz LO Adjustment Display Front Panel Parts, Exploded View A LF Section with Circuit Board Extended Examples of Diode and Transistor Marking Methods Integrated Circuit Packaging Basic AND and OR Gates Basic NAND and NOR Gates Logic Comparison Diagrams RS Flip-Flop RST Flip-Flop The Clocked JK Flip-Flop JK Master/Slave Flip-Flop Operational Amplifier Equivalent Circuit Dial Restringing Procedure Overall Troubleshooting Tree Top and Bottom Internal Views Troubleshooting Block Diagram Simplified Analyzer Block Diagram Figure 8-17 LF Section Block Diagram Reserved for Optional Inputs (will not appear in 8-20 this printing) Master Board Assembly A11 Component Locations Pre-Attenuator and Preamplifier Assembly A5 Component Locations Pre-Attenuator and Preamplifier: A3, A5 and All Schematic Input Level Switch Assembly A3 Component Locations Frequency Converter Assembly A6 Component Locations Post-Attenuator and Frequency Converter: A3 and A6 Schematic Tracking Generator Frequency Converter Assembly A9 Component Locations Tracking Generator Frequency Converter: A9 Schematic Tracking Generator Output Assembly A8 Component Locations MHz Oscillator Assembly A8A1 Component Locations Input Level Switch Assembly A3 Component Locations Tracking Generator Output: A3 and A8 Schematic Integrated Circuit Logic Diagrams Frequency Control and Marker Generator Assembly A7 Component Locations khz Marker Circuits: A7 Schematic Scan Width Switch Assembly A2 Component Locations Frequency Control and Marker Generator Assembly A7 Component Locations Frequency Control Circuits: A1, A2 and A7 Schematic Simplified Analogic Diagram Bandwidth Switch Assembly A1 Component Locations Scan Width Switch Assembly A2 Component Locations Analogic Circuits: A1 and A2 Schematic Bandwidth Switch Assembly A1 Component Locations Input Level Switch Assembly A3 Component Locations IF Section Control Circuits: A1 and A3 Schematic Power Supply Assembly A10 Component Locations Master Board Assembly A11 Component Locations Power Supply and Voltage Distribution: A10 and All Schematic iii
5 LIST OF TABLES Table 1-1 Specifications Supplemental Performance Characteristics Operating Accessories Test Equipment Test Equipment Accessories Front Panel Checks Performance Test Record Analogic Display Calibration Check Check and Adjustment Test Record Table 6-1 Designators and Abbreviations used in Parts List Manufacturers Code List Replaceable Parts Factory Selected Components Etched Circuit Soldering Equipment Schematic Diagram Notes Assembly and Component Locations Connector P2 Pin Identification Connector P3 Pin Identification Connector XA11 Pin Identification APPENDIXES APPENDIX A. REFERENCES...A-1 APPENDIX B. MAINTENANCE ALLOCATION Section I. Introduction...B-1 II. Maintenance Allocation Chart...B-3 III. Tool and Test Equipment Requirements...B-4 APPENDIX C. COMPONENTS OF END ITEM LIST (Not applicable) APPENDIX D. ADDITIONAL AUTHORIZATION LIST (Not applicable) APPENDIX E. EXPENDABLE SUPPLIES AND MATERIALS (Not applicable) APPENDIX F. PART NUMBER-NATIONAL STOCK NUMBER INDEX...F-1 APPENDIX G. MANUFACTURER'S ERRATA AND MANUAL CHANGES...G-1 iv
6 SECTION O INTRODUCTION O-1. Scope This manual provides technical data, and installation, operation, and maintenance instructions for the spectrum analyzer low-frequency plug-in PL1387/U, Hewlett-Packard model 8556A. The PL1387/U is referred to throughout this manual as the 8556A. Appendix A lists pertinent publications. Appendix B contains the Maintenance Allocation Chart (MAC), which defines the levels and scope of maintenance functions for the equipment in the Army system, and a list of the tools and test equipment required. Appendix F provides a cross reference between commercial part numbers and National Stock Numbers (NSN). Appendix G provides a listing of errors in this manual, and changes which are to be made to the manual, depending on the serial number of the 8556A with which the manual is to be used. As indicated, for plug-ins having serial numbers from 1124A00121, to 1124A00130, only change 1 is to be applied to the manual. For plug-ins with serial numbers 1404A2236 and later models, all nine changes to the manual are required. The list of appendices is located on page iv, following LIST OF TABLES in TABLE OF CONTENTS. O-2. Consolidated Index of Army Publications and Blank Forms Refer to the latest issue of DA PAM to determine whether there are new editions, changes or additional publications pertaining to the equipment. O-3. Maintenance Forms, Records, and Reports a. Reports of Maintenance and Unsatisfactory Equipment. Department of the Army forms and procedures used for equipment maintenance will be those prescribed by TM , The Army Maintenance Management system. b. Report of Packaging and Handling Deficiencies. Fill out and forward SF 364 (Report of Discrepancy (ROD)) as prescribed in AR / DLAR /NAVMATINST /AFR /MCO E. c. Discrepancy in Shipment Report (DISREP) (SF 361). Fill out and forward Discrepancy in Shipment Report (DISREP) (SF 361) as prescribed in AR NAVSUPINST B AFR /MCO P C/DLAR O-4. Reporting Equipment Improvement Recommendations (EIR) If your plug in 8556A needs improvement, let us know. Send us an EIR. You, the user, are the only one who can tell us what you don't like about your equipment. Let us know why you don't like the design. Put it on an SF 368 (Quality Deficiency Report). Mail it to: Commander, US Army Communications-Electronics Command and Fort Monmouth, ATTN; DRSEL-ME-MP, Fort Monmouth, NJ We'll send you a reply. O-5. Administrative Storage The 8556A plug-in can be stored in stockrooms, warehouses, or other protected facilities. The equipment should be protected from excessive humidity, sand, dust, and chemical contaminants. Before putting the 8556A in administrative storage, make the following preparations: a. Complete the operational adjustments procedure given in figure 3-2 to assure that the plug-in is operable. b. If the original packing material is not available, at least protect the unit with protective plastic or paper wrapping. Place the unit in a carton or box with makeshift protective packing material around it. c. Store the equipment indoors, protected from the elements. Maintain the equipment at moderate temperature and humidity. O-6. Destruction of Army Electronic Materiel Destruction of Army electronic materiel to prevent enemy use shall be in accordance with TM O-1
7 General Information Model 8556A MODEL 8556A Figure 1-1. Model 8556A Spectrum Analyzer LF Section with 8552B IF Section and 141T Display Section 1-0
8 Model 8556A SECTION I GENERAL INFORMATION General Information 1-1. INTRODUCTION 1-2. This manual contains all information required to install, operate, test, adjust and service the Hewlett- Packard Model 8556A Spectrum Analyzer LF Section. This section covers instrument identification, description, options, accessories, specifications and other basic information Figure 1-1 shows the Hewlett-Packard Model 8556A Spectrum Analyzer LF Section with the Model 8552B Spectrum Analyzer IF Section and the Model 141T Display Section. Also shown are the accessories supplied with the 8556A (see paragraph 1-15). number prefix on the instrument serial number plate of your instrument is the same as one of the prefix numbers on the inside title page of this manual, the manual applies directly to the instrument. When the instrument serial number prefix is not listed on the inside title page of this manual, manual change sheets and manual updating information is provided. Later editions or revisions to the manual will contain the required change information in Section VII The various sections in this manual provide information as follows: SECTION II, INSTALLATION, provides information relative to incoming inspection, power requirements, mounting, packing, shipping, etc. SECTION III, OPERATION, provides information relative to operating the instrument. SECTION IV, PERFORMANCE TESTS, provides information required to ascertain that the instrument is performing in accordance with published specifications. SECTION V, ADJUSTMENTS, provides information required to properly adjust and align the instrument after repairs are made. SECTION VI, REPLACEABLE PARTS, provides ordering information for all replaceable parts and assemblies. SECTION VII, MANUAL CHANGES, normally will contain no relevant information in the original issue of a manual. This section is reserved to provide back-dating and up-dating information in manual revisions or reprints. SECTION VIII, SERVICE, includes all information required to repair the instrument INSTRUMENTS COVERED BY MANUAL 1-6. Hewlett-Packard instruments carry a serial number (see Figure 1-2) on the back panel. When the serial 1-7. DESCRIPTION Figure 1-2. Instrument Identification 1-8. The Hewlett-Packard Model 8556A Spectrum Analyzer LF Section covers the frequency range from 20 Hz to 300 khz. When it is combined with an IF Section and a Display Section it functions as the tuning section of a low frequency spectrum analyzer The analyzer electronically scans input signals and displays their frequency and amplitude on a CRT. The horizontal, x-axis, is calibrated in units of frequency and the vertical, y-axis, is calibrated in absolute units of voltage (pv, mv, dbv) or power (dbm). Therefore, absolute and relative measurements of both amplitude and frequency can be made The horizontal (frequency) axis can be swept three different ways: a. The center of the CRT is set to a frequency determined by the dial and the analyzer is swept symmetrically about that frequency. b. The analyzer is not swept but is used as a fixed frequency receiver. Signal amplitude can be read on the CRT and signal modulation can be viewed as with an oscilloscope. 1-1
9 General Information c. The analyzer is swept from 0 Hz to a higher frequency selectable from 200 Hz to 200 khz The vertical (amplitude) axis provides relative and absolute measurement capability in volts, dbv, dbm into 600 ohms unbalanced, and dbm into 50 ohms The LF Section's input is isolated from the instrument chassis so that the CRT display is free of line frequency spurious responses due to ground loops Accurate frequency calibration is provided by selecting 20 khz markers The LF Section also contains a tracking generator that produces a calibrated signal that precisely tracks the analyzer tuning frequency. This signal can be used to test the frequency response of a device; it can also be used, with a frequency counter, for making frequency measurements that are accurate to 1 Hz (see Section III) ACCESSORIES SUPPLIED The 8556A LF Section requires a special knob on the IF Section in place of the standard LOG REF LEVEL control. The special knob has three scales: one is used for the LF Section log calibration (red scale), one for log calibration with the RF Sections (black scale), and one for linear calibration with all units (blue scale). This knob and an allen wrench to install it are supplied with each 8556A. Extra knobs (HP ) are available The 8556A is supplied with the following accessories: HP 11095A 600 ohm Feed Thru Termination HP 11048C 50 ohm Feed Thru Termination HP 11660A Tracking Generator Shunt (50 ohm output) EQUIPMENT REQUIRED BUT NOT SUPPLIED The 8556A LF Section must be mated with an IF Section, such as the 8552A or the 8552B, and a Display Section, such as the 140T or the 141T, before the units can perform as a spectrum analyzer IF Sections The 8552A IF Section features calibrated bandwidths, log and linear amplitude calibration, and calibrated scan times. The 8552B IF Section has all of the features of the 8552A and, in addition, manual scan, Model 8556A greater frequency stability, narrower bandwidths and an expanded log scale (2 db per division) Display Sections The 140T Display Section is equipped with a fixed persistence, non-storage CRT; the 141T Display Section is equipped with a variable persistence, storage CRT. The 143S Display Section has a large screen (8x10 inch) CRT COMPATIBILITY The 8556A LF Section is fully compatible with all current 8552A/B IF Sections; 8552A's with serial prefix 991 and below, and 8552B's with serial prefix 977 and below must be modified. The modification consists of adding a white-blue-grey (24 AWG) wire between 8552A/B connectors XA8 pin 8 and J3 pin 40. (See appropriate 8552 manual for location of connectors.) NOTE The 8556A requires a special knob on the IF Section in place of the standard LOG REF LEVEL control (see EQUIPMENT SUPPLIED) The 8556A LF Section is fully compatible with all HP 140S/T, HP 141S/T, and HP 143S Display Sections. The 8556A can be used with HP 140A/B and 141A/B Oscilloscope Mainframes but some performance specifications will be slightly degraded. (For more information, contact your nearest Hewlett-Packard office.) OPERATING ACCESSORIES Operating accessories for use with the 8556A]8552/140 Spectrum Analyzer are listed in Table 1-3. They include a frequency counter, an oscilloscope camera, and various attenuators and probes TEST EQUIPMENT REQUIRED Tables 1-4 and 1-5 list the test equipment and test equipment accessories required to check, adjust and repair the 8556A LF Section WARRANTY The 8556A LF Section is warranted and certified as indicated on page C. 1-2
OPERATOR S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL FOR OSCILLOSCOPE OS-261B(V)1/U
TECHNICAL MANUAL OPERATOR S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL FOR OSCILLOSCOPE OS-261B(V)1/U (NSN 6625-01-101-1318) (TEKTRONIX MODEL 475 WITH OPTION 04) This copy is
TM &P TECHNICAL MANUAL
TM 11-6625-2858-14&P TECHNICAL MANUAL OPERATOR S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS FOR GENERATOR, SIGNAL SG-1122/U (HEWLETT-PACKARD
DEPARTMENT OF THE ARMY TECHNICAL BULLETIN CALIBRATION PROCEDURE FOR AUTOMATIC VIDEO CORRECTOR TEKTRONIX, MODEL 1440 (NSN )
DEPARTMENT OF THE ARMY TECHNICAL BULLETIN TB 11-5820-861-35 CALIBRATION PROCEDURE FOR AUTOMATIC VIDEO CORRECTOR TEKTRONIX, MODEL 1440 (NSN 5820-00-570-1978) Headquarters, Department of the Army, Washington,
VOLTMETER, DIGITAL MODEL 2340 (NSN ) GENERAL MICROWAVE CORP.
TECHNICAL MANUAL OPERATOR S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR VOLTMETER, DIGITAL MODEL 2340 (NSN 4933-01-018-9820) GENERAL MICROWAVE
Assembly Level Service Guide
Assembly Level Service Guide This guide describes how to service the Agilent 53150A, 53151A, and 53152A Microwave Frequency Counters. The information in this guide applies to instruments having the number
HP 71910A and 71910P Wide Bandwidth Receiver Technical Specifications
HP 71910A and 71910P Wide Bandwidth Receiver Technical Specifications 100 Hz to 26.5 GHz The HP 71910A/P is a receiver for monitoring signals from 100 Hz to 26.5 GHz. It provides a cost effective combination
R3267/3273 Spectrum Analyzers
R3267/3273 Spectrum Analyzers For 3rd-Generation Mobile Communications Present Digital Communication standards (W-CDMA, PDC, PHS, IS-136, GSM, DECT, cdmaone ) R3267/3273 New communication technologies
Frequency. Range. HP 83751A/B: 2 GHz to 20 GHz HP 83752A/B: 10 MHz to 20 GHz. Standard 10 MHz timebase: f10 ppm
Frequency Range HP 83751A/B: 2 GHz to 20 GHz HP 83752A/B: 10 MHz to 20 GHz Timebase Stability Standard 10 MHz timebase: f10 ppm High stability timebase (Option le5): Accuracy = Calibration &Aging rate
USB-TG124A Tracking Generator User Manual
USB-TG124A Tracking Generator User Manual Signal Hound USB-TG124A User Manual 2017, Signal Hound, Inc. 35707 NE 86th Ave La Center, WA 98629 USA Phone 360.263.5006 Fax 360.263.5007 This information is
32 Channel CPCI Board User Manual
0 Sections Page 1.0 Introduction 1 2.0 Unpacking and Inspection 1 3.0 Hardware Configuration 1 4.0 Board Installation 5 5.0 I/O Connections and the Front Panel 5 5.1 Front Panel Layout 5 5.2 Input and
Advanced Test Equipment Rentals ATEC (2832)
E stablished 1981 Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (2832) Technical Datasheet Scalar Network Analyzer Model 8003-10 MHz to 40 GHz The Giga-tronics Model 8003 Precision Scalar
Technical Data. HF Tuner WJ-9119 WATKINS-JOHNSON. Features
May 1996 Technical Data WATKINS-JOHNSON HF Tuner WJ-9119 WJ designed the WJ-9119 HF Tuner for applications requiring maximum dynamic range. The tuner specifically interfaces with the Hewlett-Packard E1430A
Model P/03P Upconverters
Instruction Manual Model 2005-02P/03P Upconverters October 2013, Rev H 2005 TEST UPCONVERTER GHz 100MHz10MHz 1MHz C KU 70 140 IF IN GAIN DC POWER +DC IN +15V, 200 ma RF OUT DC ALARM LO IF FREQUENCY J1
RS Pro SPECTRUM ANALYZER SSA3000X SERIES
Product Datasheet ENGLISH Stock No: 1236443 (RSSA3021X) 1236444 (RSSA3032X) RS Pro SPECTRUM ANALYZER SSA3000X SERIES Features and Benefits RSSA3032X XX RSSA3021X All-Digital IFTechnology Frequency Range
Broadcast Television Measurements
Broadcast Television Measurements Data Sheet Broadcast Transmitter Testing with the Agilent 85724A and 8590E-Series Spectrum Analyzers RF and Video Measurements... at the Touch of a Button Installing,
6170 Shiloh Road Alpharetta, Georgia (770) FAX (770) Toll Free
Instruction Manual Model 2115-202 Upconverter November 2011, Rev. C MODEL 2115 UPCONVERTER CROSS TECHNOLOGIES INC. EXT 10MHZ ALARM POWER Data, drawings, and other material contained herein are proprietary
FREQUENCY CONVERTER 1/3 RACK-MOUNTED BLOCK CONVERTER. Narda-MITEQ FEATURES OPTIONS. Unit shown with Option 17. Unit shown without Option 17
1/3 RACK-MOUNTED BLOCK CONVERTER Unit shown with Option 17 Unit shown without Option 17 FEATURES Automatic 5/10 MHz internal/external reference selection with a 0.1 Hz nominal bandwidth clean-up loop Gain
Cryoelectronics. MS-FLL User s Manual. Mr. SQUID Flux-Locked Loop. STAR Cryoelectronics 25 Bisbee Court, Suite A Santa Fe, NM U. S. A.
Cryoelectronics MS-FLL User s Manual Mr. SQUID Flux-Locked Loop STAR Cryoelectronics 25 Bisbee Court, Suite A Santa Fe, NM 87508 U. S. A. STAR Cryoelectronics, LLC ii Table of Contents Revision Record...
Noise Detector ND-1 Operating Manual
Noise Detector ND-1 Operating Manual SPECTRADYNAMICS, INC 1849 Cherry St. Unit 2 Louisville, CO 80027 Phone: (303) 665-1852 Fax: (303) 604-6088 Table of Contents ND-1 Description...... 3 Safety and Preparation
Kramer Electronics, Ltd. USER MANUAL. Model: VM Video Component Distributor
Kramer Electronics, Ltd. USER MANUAL Model: VM-1045 Video Component Distributor Contents Contents 1 Introduction 1 2 Getting Started 1 2.1 Quick Start 1 3 Overview 3 4 Your VM-1045 Video Component Distributor
1995 Metric CSJ SPECIAL SPECIFICATION ITEM 6031 SINGLE MODE FIBER OPTIC VIDEO TRANSMISSION EQUIPMENT
1995 Metric CSJ 0508-01-258 SPECIAL SPECIFICATION ITEM 6031 SINGLE MODE FIBER OPTIC VIDEO TRANSMISSION EQUIPMENT 1.0 Description This Item shall govern for the furnishing and installation of color Single
1Chapter INTRODUCTION. This chapter describes the CST-5000 C-Band satellite terminal, referred to in this manual as the CST-5000 (Figure 1-1).
1Chapter 1. INTRODUCTION This chapter describes the CST-5000 C-Band satellite terminal, referred to in this manual as the CST-5000 (Figure 1-1). Figure 1-1. CST-5000 Single Thread System Rev. 9 1 1 1.1
Instruction Manual Model BlockUpconverter
Instruction Manual Model 2115-55 BlockUpconverter June 2009 - Rev. 0 MODEL 2115 UPCONVERTER CROSS TECHNOLOGIES INC. EXT 10MHZ ALARM POWER Data, drawings, and other material contained herein are proprietary
Agilent E5100A Network Analyzer
Agilent E5100A Network Analyzer Data Sheet These specifications are the performance standards or limits against which the instrument is tested. When shipped from the factory, the E5100A meets the specifications
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment FAST SHIPPING AND DELIVERY TENS OF THOUSANDS OF IN-STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED
Instruction Manual Model # Block Upconverter
Instruction Manual Model 2115-278# Block Upconverter August 2018, Rev. A MODEL 2115 UPCONVERTER CROSS TECHNOLOGIES INC. EXT 10MHZ ALARM POWER Data, drawings, and other material contained herein are proprietary
FREQUENCY CONVERTER HIGH-PERFORMANCE OUTDOOR BLOCK UP AND DOWNCONVERTERS. Narda-MITEQ 1 FEATURES OPTIONS
FREQUENCY CONVERTER HIGH-PERFORMANCE OUTDOOR BLOCK UP AND DOWNCONVERTERS Standard Configuration Vertical Mount Option FEATURES Antenna mount, weatherproof to IP-65 Automatic 5/10 MHz internal/external
SMS3000X Series Spectrum Analyzer
Data Sheet SMS3000X Series Spectrum Analyzer SMS3032X SMS3021X General Description SMS3000X series spectrum analyzer has a frequency range from 9 khz up to 2.1 GHz/3.2 GHz, it is light weight and small
SPECIAL SPECIFICATION 1987 Single Mode Fiber Optic Video Transmission Equipment
1993 Specifications CSJ 0027-12-086, etc. SPECIAL SPECIFICATION 1987 Single Mode Fiber Optic Video Transmission Equipment 1. Description. This Item shall govern for the furnishing and installation of color
Hewlett Packard 3577A 5Hz MHz Network Analyzer Specifications SOURCE
Established 1981 Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (2832) Frequency Hewlett Packard 3577A 5Hz - 200 MHz Network Analyzer Specifications SOURCE 5 Hz - 200 MHz 0.001 Hz Amplitude
PAM-1840 Preamplifier Operation Manual
PAM-1840 Preamplifier Operation Manual 1 TABLE OF CONTENTS INTRODUCTION 3 GENERAL INFORMATION 4 SPECIFICATIONS 4 OPERATING INSTRUCTIONS 5 MAINTENANCE 6 2 INTRODUCTION BEFORE APPLYING POWER Review this
Spectrum Analyzer 1.6 GHz 3 GHz R&S HMS-X
HMS-X_bro_de-en_3607-0181-3X_v0200.indd 1 Product Brochure 02.00 Test & Measurement Spectrum Analyzer 1.6 GHz 3 GHz R&S HMS-X 15.03.2016 15:24:06 1 Basic Unit + 3 Options Key facts Frequency range: 100
Agilent Series Preselected Millimeter Mixers
Agilent 11974 Series Preselected Millimeter Mixers RF Sections Available in Four Bands from 26.5 to 75 GHz Data Sheet For the first time, preselected signal analysis is available to 75 GHz. With preselection,
Agilent 5345A Universal Counter, 500 MHz
Agilent 5345A Universal Counter, 500 MHz Data Sheet Product Specifications Input Specifications (pulse and CW mode) 5356C Frequency Range 1.5-40 GHz Sensitivity (0-50 deg. C): 0.4-1.5 GHz -- 1.5-12.4 GHz
Agilent 8560 E-Series Spectrum Analyzers
Agilent 8560 E-Series Spectrum Analyzers Data Sheet 8560E 30 Hz to 2.9 GHz 8561E 30 Hz to 6.5 GHz 8562E 30 Hz to 13.2 GHz 8563E 30 Hz to 26.5 GHz 8564E 30 Hz to 40 GHz 8565E 30 Hz to 50 GHz 8565E SPECTRUM
Specifications. End-Point Linearity - ±5% F.S., when used with HACO SCR-speed control
Specifications Model 552 Catalog No. Model Power 55-0665 552 115 VAC, 50-60 Hz 55-0673 552A 230 VAC, 50-60 Hz Input - Single-ended, DC coupled 0 to +10V. Signal source can be Floating (not referenced to
Technical Description
irig Multi Band Digital Receiver System Technical Description Page 1 FEATURES irig Multi Band Digital Receiver System The irig range of telemetry products are the result of a multi year research and development
USER MANUAL. Blackburst, Sync, Audio Tone Generator. For Models BSG-50, RM-50/BSG, SR-50/BSG. Doc Rev. F (C) Copyright 2014
HORITA BSG-50 Blackburst, Sync, Audio Tone Generator USER MANUAL For Models BSG-50, RM-50/BSG, SR-50/BSG Doc. 070450 Rev. F (C) Copyright 2014 P.O. Box 3993, Mission Viejo, CA 92690 (949) 489-0240 www.horita.com
R2001A/B/C Service Monitor Alignment Sections
R2001A/B/C Service Monitor Alignment Sections R2001A Depot Alignment Notes R2001A Alignment Section A12 FRNT PNL INTERFACE A3 SCOPE/DVM CONTRC)L SINAD IN 3 ( 6 3 1 KHz NOTCH FIL DET»
Low Noise Solid State Phono Preamplifier User's Guide and Operating Information
Bel Canto Design PHONO 1 Low Noise Solid State Phono Preamplifier User's Guide and Operating Information Bel Canto Design 212 Third Avenue North Suite 345 Minneapolis, MN 55401 Phone: (612) 317.4550 Fax:
MASTERING DIGITAL TO ANALOG USER MANUAL. VER.7/April Use ver.5 manual for earlier units (without toslink)
MASTERING DIGITAL TO ANALOG CONVERTER USER MANUAL VER.7/April 2007 Use ver.5 manual for earlier units (without toslink) Quick Start.3 Introduction.....4 This manual may be updated Download the newest version
MULTIBAND 1/3 RACK-MOUNTED
BLOCK CONVERTER FEATURES Cover multiple ITU Ku-Band regions and other combinations Automatic 5/10 MHz internal/external reference selection with a 0.1 Hz nominal bandwidth clean-up loop RS-485/RS-422 and
Kramer Electronics, Ltd. USER MANUAL. Model: 482xl. Bi-directional Audio Transcoder
Kramer Electronics, Ltd. USER MANUAL Model: 482xl Bi-directional Audio Transcoder Contents Contents 1 Introduction 1 2 Getting Started 1 3 Overview 2 4 Your Bi-directional Audio Transcoder 2 5 Connecting
I R T Electronics Pty Ltd A.B.N. 35 000 832 575 26 Hotham Parade, ARTARMON N.S.W. 2064 AUSTRALIA National: Phone: (02) 9439 3744 Fax: (02) 9439 7439 International: +61 2 9439 3744 +61 2 9439 7439 Email:
INSTALLATION MANUAL. CTMS-516RKPS Rack Mount Satellite Multiswitch
INSTALLATION MANUAL CTMS-516RKPS Rack Mount Satellite Multiswitch 1 PACKAGE CONTENTS This package contains: One CTMS-516RKPS Rack Mount Satellite Multiswitch One CTMS-516RKPS Installation Manual PRODUCT
AES-404 Digital Audio Switcher/DA/Digital to Analog Converter
Broadcast Devices, Inc. AES-404 Digital Audio Switcher/DA/Digital to Analog Converter Technical Reference Manual Broadcast Devices, Inc. Tel. (914) 737-5032 Fax. (914) 736-6916 World Wide Web: www.broadcast-devices.com
Kramer Electronics, Ltd. USER MANUAL. Models: TR-1YC, s-video Isolation Transformer TR-2YC, s-video Dual Isolation Transformers
Kramer Electronics, Ltd. USER MANUAL Models: TR-1YC, s-video Isolation Transformer TR-2YC, s-video Dual Isolation Transformers Contents Contents 1 Introduction 1 2 Getting Started 1 2.1 Quick Start 1 3
MODULAR DIGITAL ELECTRONICS TRAINING SYSTEM
MODULAR DIGITAL ELECTRONICS TRAINING SYSTEM MDETS UCTECH's Modular Digital Electronics Training System is a modular course covering the fundamentals, concepts, theory and applications of digital electronics.
Vorne Industries. 87/719 Analog Input Module User's Manual Industrial Drive Itasca, IL (630) Telefax (630)
Vorne Industries 87/719 Analog Input Module User's Manual 1445 Industrial Drive Itasca, IL 60143-1849 (630) 875-3600 Telefax (630) 875-3609 . 3 Chapter 1 Introduction... 1.1 Accessing Wiring Connections
Interface Practices Subcommittee SCTE STANDARD SCTE Measurement Procedure for Noise Power Ratio
Interface Practices Subcommittee SCTE STANDARD SCTE 119 2018 Measurement Procedure for Noise Power Ratio NOTICE The Society of Cable Telecommunications Engineers (SCTE) / International Society of Broadband
Instrumentation Grade RF & Microwave Subsystems
Instrumentation Grade RF & Microwave Subsystems PRECISION FREQUENCY TRANSLATION SignalCore s frequency translation products are designed to meet today s demanding wireless applications. Offered in small
Spectrum Analyzers. 2399A 9 khz to 3 GHz Spectrum Analyzer.
Spectrum Analyzers 2399A 9 khz to 3 GHz Spectrum Analyzer A spectrum analyzer with outstanding performance and a user friendly visual interface simplifying many complex measurements 9 khz to 3 GHz fully
Model /29S RF Splitter
Instruction Manual Model 1584-29/29S RF Splitter March 2013, Rev. 0 LNB VOLTAGE A B MODEL 1584 COMBINER CROSS TECHNOLOGIES INC. GND+DC ON Data, drawings, and other material contained herein are proprietary
Westrex RA1713B Auxiliary Record Electronics
Westrex RA1713B Auxiliary Record Electronics INTRODUCTION The RA-1713B is an auxiliary electronics system for use with the Westrex RA- 1712B. It comprises a current regulated, digital readout, recorder
Spectrum Analyzer 1.6 GHz 3 GHz HMS-X
Spectrum Analyzer 1.6 GHz 3 GHz 1 Basic Unit + 3 Options Your Spectrum Analyzer Key facts Frequency range: 100 khz to 1.6 GHz/3 GHz* 1 Spectral purity greater than -100 dbc/hz (at 100 khz) SWEEP from 20
Flat-Bed Module Recorders
Flat-Bed Module Recorders Model No. 08376-50 08376-55 08376-60 0115-0192 4/28/00 Table of Contents Introduction...3 Power Requirements...3 Chart Paper Installation...3 Pen Installation...5 Grounding...5
5.1 + Stereo Monitor Controller
Broadcast Devices, Inc. Technical Reference Manual 5.1 + Stereo Monitor Controller Broadcast Devices, Inc. 2066 E. Main Street Cortlandt Manor, NY 10567 Tel. (914) 737-5032 Fax. (914) 736-6916 World Wide
Kramer Electronics, Ltd. USER MANUAL. Model: VM-10xl. Video Audio Distribution Amplifier
Kramer Electronics, Ltd. USER MANUAL Model: VM-10xl Video Audio Distribution Amplifier Contents Contents 1 Introduction 1 2 Getting Started 1 2.1 Quick Start 1 3 Overview 3 4 Your VM-10xl Video Audio Distribution
ACTIVE IF SPLITTER/COMBINER UHP-IFS
ACTIVE IF SPLITTER/COMBINER UHP-IFS GENERAL DESCRIPTION AND INSTALLATION GUIDE DOCUMENT RELEASE 2 [UHP.IFS.2.EN] JUNE 2016 CONTENT Acronyms and Abbreviations... 4 Introduction... 5 Required level of qualification...
IRT Eurocard. Type RWA RF Distribution Amplifier for 70 MHz IF signals
I R T Electronics Pty Ltd A.B.N. 5 000 8 575 6 Hotham Parade, ARTARMON N.S.W. 064 AUSTRALIA National: Phone: (0) 949 744 Fax: (0) 949 749 International: +6 949 744 +6 949 749 Email: sales@irtelectronics.com
SSA3000X Series Spectrum Analyzer
SSA3000X Series Spectrum Analyzer SSA3000X Spectrum Analyzer Data Sheet Features and Benefits SSA3032X SSA3021X All-Digital IF Technology Frequency Range from 9 khz up to 3.2 GHz -161 dbm/hz Displayed
RIGOL. Data Sheet. DS1000B Series Digital Oscilloscopes DS1074B, DS1104B, DS1204B. Product Overview. Easy to Use Design. Applications.
RIGOL Data Sheet Product Overview DS1000B series oscilloscopes are designed with four analog channels and 1 external trigger channel, which can capture multi-channel signal simultaneously and meet industrial
BEFORE PROCEEDING WITH COMPLETE UNPACKING AND SETUP, CONSULT UNPACKING AND INSPECTION INSTRUCTIONS ON PAGE 8. Model LA 4 COMPRESSOR/LIMITER
BEFORE PROCEEDING WITH COMPLETE UNPACKING AND SETUP, CONSULT UNPACKING AND INSPECTION INSTRUCTIONS ON PAGE 8 Model LA 4 COMPRESSOR/LIMITER EFFECTIVE WITH SERIAL +3196 United Recording Electronics Industries
RF Level Test System +20 dbm to 130 dbm
NRVD Power Meter optional Therm. Sensor A B Power: >-15 dbm DUT (Signal Generator, Communication Tester) 1 MHz - 3.5/6 GHz +20 dbm... -130 dbm Diode Sensor Z4 Power: -15 to -40 dbm 6 db Power =< -40 dbm
Connevans.info. DeafEquipment.co.uk. This product may be purchased from Connevans Limited secure online store at
Connevans.info Solutions to improve the quality of life Offering you choice Helping you choose This product may be purchased from Connevans Limited secure online store at www.deafequipment.co.uk DeafEquipment.co.uk
USER MANUAL. Kramer Electronics, Ltd. Models:
Kramer Electronics, Ltd. USER MANUAL Models: 707, Video Audio Line Transmitter 708, Video Audio Line Receiver 709, Y/C Line Transmitter 710, Y/C Line Receiver 711xl, Video-Audio Line Transmitter 712xl,
MENU EXECUTE Shiloh Road Alpharetta, Georgia (770) FAX (770) Toll Free
Instruction Manual Model 2016-1250 Downconverter May 2009 Rev A F=2501.750 G=+25.0 MENU MODEL 2016 DOWNCONVERTER CROSS TECHNOLOGIES INC. ALARM REMOTE POWER EXECUTE Data, drawings, and other material contained
AES-402 Automatic Digital Audio Switcher/DA/Digital to Analog Converter
Broadcast Devices, Inc. AES-402 Automatic Digital Audio Switcher/DA/Digital to Analog Converter Technical Reference Manual Broadcast Devices, Inc. Tel. (914) 737-5032 Fax. (914) 736-6916 World Wide Web:
DA1909 COMPUTER VIDEO LINE DRIVER WITH EQUALIZATION USER S GUIDE
MANUAL PART NUMBER: 400-0108-002 PRODUCT REVISION: 1 COMPUTER VIDEO LINE DRIVER WITH EQUALIZATION USER S GUIDE INTRODUCTION Altinex appreciates your purchase of the Line Driver. We are sure you will find
USB-SA44B Spectrum Analyzer User Manual
USB-SA44B Spectrum Analyzer User Manual Signal Hound USB-SA44B User Manual 2017, Signal Hound, Inc. 35707 NE 86th Ave La Center, WA 98629 USA Phone 360.263.5006 Fax 360.263.5007 This information is being
INTRODUCTION PRODUCT CONCEPT AND DESCRIPTION
1 INTRODUCTION PRODUCT CONCEPT AND DESCRIPTION The Audio Suite is a mainframe which accepts up to ten modular sections thereby permitting individualized selection of preamplifier features and functions.
SK2002DA SIDEKICKER 1-IN, 2-OUT VGA-UXGA DISTRIBUTION AMPLIFIER CABLE USER S GUIDE DISTRIBUTION AMPLIFIERS
MANUAL PART NUMBER: 400-0152-001 PRODUCT REVISION: 0 SK2002DA SIDEKICKER 1-IN, 2-OUT VGA-UXGA DISTRIBUTION AMPLIFIER CABLE USER S GUIDE TABLE OF CONTENTS Page PRECAUTIONS / SAFETY WARNINGS...2 GENERAL...2
SPECIAL SPECIFICATION 6686 BSIF CCTV Central Equipment
2004 Specifications CSJ 0922-00-025, 0921-02-173 & 0921-06-208 SPECIAL SPECIFICATION 6686 BSIF CCTV Central Equipment 1. Description. Furnish and install closed circuit television (CCTV) central equipment
Signal Stability Analyser
Signal Stability Analyser o Real Time Phase or Frequency Display o Real Time Data, Allan Variance and Phase Noise Plots o 1MHz to 65MHz medium resolution (12.5ps) o 5MHz and 10MHz high resolution (50fs)
Advanced Test Equipment Rentals ATEC (2832)
Established 1981 Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (2832) This product is no longer carried in our catalog. AFG 2020 Characteristics Features Ordering Information Characteristics
RF Semiconductor Test AXRF RF Port Upgrade Kits
RF Semiconductor Test AXRF RF Port Upgrade Kits 2017 Datasheet The most important thing we build is trust Overview AXRF RF Port Upgrade Kits are designed to improve and extend the capability of an existing
Kramer Electronics, Ltd. USER MANUAL. Model: 810B. Black Burst / Audio Generator
Kramer Electronics, Ltd. USER MANUAL Model: 810B Black Burst / Audio Generator Contents Contents 1 Introduction 1 2 Getting Started 1 3 Your 810B Black Burst / Audio Generator 1 4 Connecting the 810B Black
NewScope-7A Operating Manual
2016 SIMMCONN Labs, LLC All rights reserved NewScope-7A Operating Manual Preliminary May 13, 2017 NewScope-7A Operating Manual 1 Introduction... 3 1.1 Kit compatibility... 3 2 Initial Inspection... 3 3
R&S ZVA-Zxx Millimeter-Wave Converters Specifications
R&S ZVA-Zxx Millimeter-Wave Converters Specifications Data Sheet Version 19.00 CONTENTS Definitions... 3 General information... 4 Specifications... 5 Test port... 5 Source input (RF IN)... 5 Local oscillator
INSTRUCTION MANUAL MODEL 2710 SUBCARRIER DEMODULATOR
INSTRUCTION MANUAL MODEL 2710 SUBCARRIER DEMODULATOR Data, drawings, and other material contained herein are proprietary to Cross Technologies, Inc., and may not be reproduced or duplicated in any form
Synthesized Clock Generator
Synthesized Clock Generator CG635 DC to 2.05 GHz low-jitter clock generator Clocks from DC to 2.05 GHz Random jitter
TC Mbps - 622Mbps FIBER OPTIC MODE CONVERTER/REPEATER (Rev A0.1) User's Manual
TC3004 50Mbps - 622Mbps FIBER OPTIC MODE CONVERTER/REPEATER (Rev A0.1) MODEL: S/N: DATE: Notice! Although every effort has been made to insure that this manual is current and accurate as of date of publication,
MENU EXECUTE Shiloh Road Alpharetta, Georgia (770) FAX (770) Toll Free
Instruction Manual Model 2584-31 Combiner May 2011, Rev. A RF MONITOR GAIN = -15 MENU MODEL 2584 COMBINER CROSS TECHNOLOGIES INC. ALARM REMOTE POWER EXECUTE Data, drawings, and other material contained
DEPARTMENT OF THE ARMY TECHNICAL BULLETIN CALIBRATION PROCEDURE FOR TELETYPEWRITER TEST SET TS-800/UGM-l
TB 11-6625-620-35-2 DEPARTMENT OF THE ARMY TECHNICAL BULLETIN CALIBRATION PROCEDURE FOR TELETYPEWRITER TEST SET TS-800/UGM-l Headquarters, Department of the Army, Washington, DC 16 May 1974 Paragraph Page
NS-3 RF Noise Source Operation Manual
RF Noise Source Operation Manual Version 2.04 June 3, 2016 SPECIFICATIONS Frequency... Maximum output level... Output flatness... (at max output level) Impedance... Displayed level... Repeatability...
Kramer Electronics, Ltd. USER MANUAL. Models: OC-1N, Video Isolator OC-2, Dual Channel Video Isolator OC-4, Quad Channel Video Isolator
Kramer Electronics, Ltd. USER MANUAL Models: OC-1N, Video Isolator OC-2, Dual Channel Video Isolator OC-4, Quad Channel Video Isolator Contents Contents 1 Introduction 1 2 Getting Started 1 2.1 Quick Start
PCM ENCODING PREPARATION... 2 PCM the PCM ENCODER module... 4
PCM ENCODING PREPARATION... 2 PCM... 2 PCM encoding... 2 the PCM ENCODER module... 4 front panel features... 4 the TIMS PCM time frame... 5 pre-calculations... 5 EXPERIMENT... 5 patching up... 6 quantizing
1:1 and 1:2 Redundant Low-Noise Ka-Band Block Converter Systems
R Back to Block/Fixed Tuned Converters 1:1 and 1:2 Redundant Low-Noise Ka-Band Block Converter Systems 1:1 1:1 AND 1:2 REDUNDANT LOW- NOISE Ka-BAND BLOCK CONVERTER SYSTEMS Specifications Options 1:1 Diagram
ROSS VIDEO LIMITED PAA Programmable Audio Amplifier USER MANUAL PAA-01-MNL Issue 1
ROSS VIDEO LIMITED PAA-7803 Programmable Audio Amplifier USER MANUAL 7803-PAA-01-MNL Issue 1 PAA-7803 Programmable Audio Amplifier User s Manual Ross Part Number: 7803-PAA-01-MNL Document Issue: 1 Printing
SPECIAL SPECIFICATION 6911 Fiber Optic Video Data Transmission Equipment
2004 Specifications CSJ 3256-02-079 & 3256-03-082 SPECIAL SPECIFICATION 6911 Fiber Optic Video Data Transmission Equipment 1. Description. Furnish and install Fiber Optic Video Data Transmission Equipment
SSA3000X Series Spectrum Analyzer
SSA3000X Series Spectrum Analyzer SSA3000X Spectrum Analyzer Data Sheet Features and Benefits SSA3032X SSA3021X All-Digital IF Technology Frequency Range from 9 khz up to 3.2 GHz -161 dbm/hz Displayed
HIGH RESOLUTION MONITOR
HIGH RESOLUTION MONITOR 29" Pure Flat 15K-40Khz Installation Instruction WARNING Primary side and Secondary side The monitor's circuit which is divided into the primary side and secondary side, is insulated.
Converters Series Tri-Band Frequency Converters. Back to Multiband. Specifications Upconverters Downconverters Phase Noise Options Rear Panel
R Back to Multiband Converters 9700 Series Tri-Band Frequency Converters 9700 SERIES TRI-BAND FREQUENCY CONVERTERS The MITEQ frequency converters are designed for advanced satellite communication systems
INTRODUCTION This procedure should only be performed if the instrument fails to meet the Performance Check tests for Output Zero or Offset Accuracy
INTRODUCTION This procedure should only be performed if the instrument fails to meet the Performance Check tests for Output Zero or Offset Accuracy (steps A and B). Gain, which affects DC Accuracy, cannot
AES Channel Digital/Analog Audio Switcher/DA/Digital to Analog Converter
Broadcast Devices, Inc. AES-408 8 Channel Digital/Analog Audio Switcher/DA/Digital to Analog Converter Technical Reference Manual Broadcast Devices, Inc. Tel. (914) 737-5032 Fax. (914) 736-6916 World Wide
FREQUENCY CONVERTER. MULTIPLE OUTPUT WIDEBAND Ku AND Ka DOWNCONVERTERS. Narda-MITEQ FEATURES OPTIONS
MULTIPLE OUTPUT WIDEBAND Ku AND Ka DOWNCONVERTERS FEATURES Small weather resistant enclosure Automatic 5/10 MHz internal/external reference selection 10/100 Base-T Ethernet and RS-485/RS-422 remote control
Model 1421 Distribution Amplifier
Model 1421 Distribution Amplifier Installation and Operating Instructions The 1421 Distribution Amplifier provides four independent, wide bandwidth outputs from one video input. The unit is color compatible
1/3 RACK-MOUNTED BLOCK CONVERTERS
AMPLITUDE SLOPE CONTROL Unit shown with option 17 Unit shown without option 17 FEATURES Automatic 5/10 MHz internal/external reference selection with a 0.1 Hz nominal bandwidth clean-up loop Gain control
Kramer Electronics, Ltd. USER MANUAL. Model: VP-100. VGA/XGA to RGBHV Converter
Kramer Electronics, Ltd. USER MANUAL Model: VP-100 VGA/XGA to RGBHV Converter Contents Contents 1 Introduction 1 2 Getting Started 1 2.1 Quick Start 1 3 Overview 3 4 Your VP-100 VGA/XGA to RGBHV Converter
R&S FPC1000 Spectrum Analyzer Specifications
R&S FPC1000 Spectrum Analyzer Specifications year Data Sheet Version 01.00 CONTENTS Definitions... 3 Specifications... 4 Frequency... 4 Sweep time... 4 Bandwidth... 4 Level... 5 Trigger functions... 6