SEMIANNUALLY 10 May 1998 SUPERSEDING QPL October 1997 QUALIFIED PRODUCTS LIST PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATION

Size: px
Start display at page:

Download "SEMIANNUALLY 10 May 1998 SUPERSEDING QPL October 1997 QUALIFIED PRODUCTS LIST PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATION"

Transcription

1 QUALIFICATIONS VALIDATED SEMIANNUALLY 10 May 1998 SUPERSEDING QPL October 1997 QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATION MIL-PRF RESISTOR NETWORKS, FIXED, FILM, AND CAPACITOR-RESISTOR NETWORKS, CERAMIC CAPACITOR AND FIXED FILM RESISTORS, GENERAL SPECIFICATION FOR This list has been prepared for use by or for the Government in the acquisition of products covered by subject specification and such listing of a product is not intended to and does not connote indorsement of the product by the Department of Defense. All products listed herein have been qualified under the requirements for the product as specified in the latest effective issue of the applicable specification. This list is subject to change without notice; revision or amendment of this list will be issued as necessary. The listing of a product does not release the supplier from compliance with the specification requirements. THE ACTIVITY RESPONSIBLE FOR THIS QPL IS THE DEFENSE SUPPLY CENTER COLUMBUS (DSCC-VQ), COLUMBUS, OH M MDM /1 Dale Electronics, Inc. (1) C MDC Chars. K and M, schematics A and B, res. values MDM ohms thru megohm, res. tols. F, MDC M MDM /1 Dale Electronics, Inc. (1) C MDC Chars. K and M, schematic J, res. designators M D /1 Dale Electronics, Inc. Chars. K and M, schematics A and B, res. values Techno Division 27.4 ohms thru 100,000 ohms, res. tols. F. G, and J, res. values 27.0 ohms thru 100,000 ohms, res. tols. M /1 IRC, Inc. C Chars. H, K, and M, schematic A, res. values 100 ohms thru 0.1 megohm, res. tols. Chars. H, K, and M, schematic B, res. values 50 ohms thru 70,000 ohms, res. tols. M /1 Vishay Resistive Systems C Group, Inc. (1, 2) Chars. C and V, schematic A, res. values 100 ohms thru 10,000 ohms, res. tols. B, D, F, G, and J. 1 of 7 AMSC N/A FSC 5905 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.

2 M MDM /2 Dale Electronics, Inc. C MDC (1) Chars. K and M, schematics A and B, res. values MDM ohms thru megohm, res. tols. F, MDC M MDM /2 Dale Electronics, Inc. C MDC (1) Chars. K and M, schematic J, res. designators A001 thru A018, res. tols. F, G, and J. M D /2 Dale Electronics, Inc. Chars. K and M, schematics A and B, res. values Techno Division 27.4 ohms thru 100,000 ohms, res. tols. F, G, and J, res. values 27.0 ohms thru 100,000 ohms, res. tols. M C /2 IRC, Inc. Chars. H, K and M, schematic A, res. values ohms thru 0.1 megohm, res. tols. B, D, F, Chars. H, K, and M, schematic B, res. values 50 ohms thru 70,000 ohms, res. tols. B, D, F, M C /2 Vishay Resistive Systems Chars. C and V, schematic A, res. values 100 ohms Group, Inc. (1, 2) thru 10,000 ohms, res. tols. B, D, F, M DFM /3 Dale Electronics, Inc. Chars. K and M, schematics A and B, res. values DFM (1, 2) 10 ohms thru 1.0 megohm, res. tols. F, G, and J. M DFM-14-15RC /3 Dale Electronics, Inc. Chars. K and M, schematic J, res. designators (1, 2) M C /3 IRC, Inc. Chars. H, K, and M, schematics A and B, res B, D, F, G, and J. Chars. H and K, schematics A and B, res. values 100 ohms thru 121,000 ohms, res. tols. F, Char. M, schematics A and B, res. values 49.9 ohms thru 121,000 ohms, res. tols. F, M MSM06C /4 Dale Electronics, Inc. (1) C MSC06C-01 Chars. K and M, schematics C and G, res. values MSM06C ohms thru 1.0 megohm, schematic H, res. MSC06C-03 designators M MSM06C /4 Dale Electronics, Inc. (2) C MSC06C-01 Chars. K and M, schematics C and G, res. values MSM06C ohms thru 1.0 megohm, res. tols. F, MSC06C-03 M MSM06C /4 Dale Electronics, Inc. (2) C MSC06C-05 Chars. K and M, schematic H, designators A001 thru A018, res. tols. F, M S /4 Dale Electronics, Inc. Char. K and M, schematics C and G, res. values Techno Division 100 ohms thru 100,000 ohms, res. tols. F, 2

3 M MSM08C-01 C MSC08C /5 Dale Electronics, Inc. (1) Chars. K and M, schematics C and G, res. values MSM08C ohms thru 1.0 megohm, schematic H, res. MSC08C-03 designators MSM08C-05 MSC08C-05 M MSM08C /5 Dale Electronics, Inc. (2) C MSC08C-01 Chars. K and M, schematics C and G, res. values MSM08C ohms thru 1.0 megohm, res. tols. F, MSC08C-03 M MSM08C /5 Dale Electronics, Inc. (2) C MSC08C-05 Chars. K and M, schematic H, designators A001 thru A018, res. tols. F, M S /5 Dale Electronics, Inc. Char. K and M, schematics C and G, res. values Techno Division 100 ohms thru 100,000 ohms, res. tols. F, M MSM10C /6 Dale Electronics, Inc. (1) C MSC10C-01 Chars. K and M, schematics C and G, res. values MSM10C ohms thru 1.0 megohms, res. tols. F, MSC10C-03 M MSM10C /6 Dale Electronics, Inc. (1) M MSC10C-05 A001 thru A018, res. tols. F, G, and J. M MSM10C /6 Dale Electronics, Inc. (2) C MSC10C-01 Chars. K and M, schematics C and G, res. values MSM10C ohms thru 1.0 megohm, res. tols. F, MSC10C-03 M MSM10C /6 Dale Electronics, Inc. (2) C MSC10C-05 Chars. K and M, schematic H, designators A001 thru A020, res. tols. F, M S /6 Dale Electronics, Inc. 100 ohms thru 100,000 ohms, res. tols. F, M MSM06A /7 Dale Electronics, Inc. (2) C MSC06A-01 Chars. K and M, schematics C and G, res. values MSM06A ohms thru 1.0 megohm, res. tols. F, MSC06A-03 M MSM06A /7 Dale Electronics, Inc. (2) M MSC06A-05 M L /7 Dale Electronics, Inc. 27 ohms thru 100,000 ohms, res. tols. F, M C /7 IRC, Inc. Chars. H, K and M, schematics C and G, res. values ohms thru 100,000 ohms, res. tols. B, D, F, 3

4 M MSM08A /8 Dale Electronics, Inc. (2) C MSC08A-01 Chars. K and M, schematics C and G, res. values MSM08A ohms thru 1.0 megohm, res. tols. F, MSC08A-03 M MSM08A /8 Dale Electronics, Inc. (2) C MSC08A-05 M L /8 Dale Electronics, Inc. 27 ohms thru 100,000 ohms, res. tols. F, M C /8 IRC, Inc. Chars. H, K and M, schematics C and G, res. values ohms thru 100,000 ohms, res. tols. B, D, F, M MSM10A /9 Dale Electronics, Inc. (2) C MSC10A-01 Chars. K and M, schematics C and G, res. values MSM10A ohms thru 1.0 megohm, res. tols. F, MSC10A-03 M MSM10A /9 Dale Electronics, Inc. (2) C MSC10A-05 A001 thru A020, res. tols. F, M L /9 Dale Electronics, Inc. 27 ohms thru 100,000 ohms, res. tols. F, M C /9 IRC, Inc. Chars. H, K and M, schematics C and G, res. values ohms thru 100,000 ohms, res. tols. B, D, F, G, and J. M C /10 IRC, Inc. Chars. H, K and M, schematics A, B and J, res. B, D, F, G, and J. M HR /13 IRC, Inc. C HR Chars. H, K and M, schematic A, res. values 50 ohms thru 0.1 megohm, res. tols. B, D, F, G, and J. Chars. H, K, and M, schematic B, res. values 50 ohms thru 70,000 ohms, res. tols. B, D, F, G, and J. M Q /13 Vishay Resistive Systems C Group, Inc. (1, 2) Chars. C and V, schematic A, res. values 100 ohms thru 10,000 ohms, res. tols. B, D, F, G, and J. 4

5 M C HR /14 IRC, Inc. Chars. H, K and M, schematic A, res. values 1998HR 50 ohms thru 0.1 megohm, res. tols. B, D, F, G, J. Chars. H, K, and M, schematic B, res. values 50 ohms thru 70,000 ohms, res. tols. M C Q /14 Vishay Resistive Systems Chars. C and V, schematic A, res. values Group, Inc. (1, 2) ohms thru 10,000 ohms, res. tols. M C HR /15 IRC, Inc. Chars. H, K and M, schematics A and B, res. 8987HR F, Chars. H and K, schematics A and B, res. values 100 ohms thru 121,000 ohms, res. tols. F, G, and J. Char. M, schematics A and B, res. values 49.9 ohms thru 121,000 ohms, res. tols. F, G, and J. M MSM06A /18 Dale Electronics, Inc. (1) Char. K, schematics M KA001GX and M KA002GX, tol. G. M C /18 IRC, Inc. Char. K, schematics M KA001GX and 153 M KA002GX, tol. G. M MSM08A /19 Dale Electronics, Inc. (1) Char. K, schematics M KA001GX thru M KA012GX, tol. G. M C , 4154, /19 IRC, Inc. Char. K, schematics M KA001GX thru 4155, 4156, M KA009GX, tol. G. 4157, 4159, 4161, 4170, 4171 M C HR /21 IRC, Inc. Chars. H, K and M, schematics C and G, res. 4769HR M C HR /22 IRC, Inc. Chars. H, K and M, schematics C and G, res. 4789HR M C HR /23 IRC, Inc. Chars. H, K and M, schematics C and G, res. 4709HR

6 I The foreign-made products listed in Part II of this QPL have been certified by the authorized inspectorate of the foreign government and by the manufacturer, to be manufactured, tested and qualified in conformance with the applicable foreign specification identified with each product. The products listed in Part II have been ascribed by the foreign National Qualifying Activity (NQA) and applicable manufacturer that they are generally suitable for the functional applications ascribed to the U.S.-specified products listed in Part I of the QPL; however, no review has been made by our qualifying acticity of the manufacturing, test facilities or test report. Futhermore, no determination of equivalency has been conducted. User agencies, industrial equipment designers and manufac-turers planning to use the products listed in Part II are wholly responsible for examining and evaluating the applicable foreign specifications, design data, quality/reliability levels and product qualification test data to determine the technical suitability of these products for use in components and equipment specified under the U.S. Department of Defense procurement contracts. Products listed in Part II should not be selected for use in equipments or systems that are beyond the prototype design and development phase. The products listed herein are reciprocal listings based on the NATO Standardization Agreement (Stanag) 4093 or International Standardization Agreements. NOTE: No devices are to be JAN branded, but should be marked with the appropriate national part numbers and identifiers, as applicable. NATIONAL DEVICE NATIONAL TEST REPORT U.S. NATIONAL MANUFACTURER'S NAME SPECIFICATION QPL NUMBER DEVICE SPECIFICATION AND ADDRESS BS 9450 PD9002 UC/31/00246/CA1 M Beckman Industrial, Ltd. CA028 UC/31/00246/CA2 Chars. K and M, schematics A, B, Queensway, Glenrothes UC/31/00246/CA2-1 and J, res. values 12 ohms thru Fife, Scotland KY7 5PU 1.0 megohm, res. tols. F and G. BS 9450 PD9002 UC/31/00246/CA1 M Beckman Industrial, Ltd. CA028 UC/31/00246/CA2 Chars. K and M, schematics A, B, Queensway, Glenrothes UC/31/00246/CA2-1 and J, res. values 12 ohms thru Fife, Scotland KY7 5PU 1.0 megohm, res. tols. F and G. 6

7 MANUFACTURER'S NAME, ADDRESS CAGE AND PLANT CODE Dale Electronics, Inc. P.O. Box rd Street Columbus, NE Plants: Riverside Boulevard Norfolk, NE 2. Dale Israel Emek-Sarah "B" Industrial Park Beer-Sheva, Israel Dale Electronics, Inc. Techno Division 7803 Lemona Avenue Van Nuys, CA Plant: 7777 Lemona Avenue Van Nuys, CA IRC, Inc. International Resistive Company 4222 South Staples Corpus Christi, TX Plant: Same Address Vishay Resistive Systems Group, Inc. 63 Lincoln Highway Malvern, PA Plants: 1. Vishay Israel, Ltd. 2 Ha'ofan Street Holon 58125, Israel Lincoln Highway Malvern, PA of 7

SEMIANNUALLY 20 February 2002 SUPERSEDING QPL September 2001 QUALIFIED PRODUCTS LIST PRODUCTS QUALIFIED UNDER PERFORMANCE SPECIFICATION

SEMIANNUALLY 20 February 2002 SUPERSEDING QPL September 2001 QUALIFIED PRODUCTS LIST PRODUCTS QUALIFIED UNDER PERFORMANCE SPECIFICATION QUALIFICATIONS VALIDATED SEMIANNUALLY 20 February 2002 SUPERSEDING QPL-83401-82 26 September 2001 QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER PERFORMANCE SPECIFICATION MIL-PRF-83401 RESISTOR NETWORKS,

More information

Schematic. Schematic PART LISTINGS MANUFACTURER'S DESIGNATION OR TYPE NUMBER MDC-14-01, MDC MDM-14-01, MDM

Schematic. Schematic PART LISTINGS MANUFACTURER'S DESIGNATION OR TYPE NUMBER MDC-14-01, MDC MDM-14-01, MDM Specification Details: DLA Land and Maritime - VQ Date: 5/16/2018 Specification: MIL-PRF-83401 Title: Resistor Networks, Fixed, Film and Capacitor-Resistor Networks, Ceramic Capacitor and Fixed Film Resistors

More information

EVERY TWO YEARS 24 November 2000 SUPERSEDING QPL June 1998 QUALIFIED PRODUCTS LIST PRODUCTS QUALIFIED UNDER DETAIL SPECIFICATION

EVERY TWO YEARS 24 November 2000 SUPERSEDING QPL June 1998 QUALIFIED PRODUCTS LIST PRODUCTS QUALIFIED UNDER DETAIL SPECIFICATION QUALIFICATIONS VALIDATED EVERY TWO YEARS 24 November 2000 SUPERSEDING QPL-81381-14 1 June 1998 QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER DETAIL SPECIFICATION MIL-DTL-81381 WIRE, ELECTRIC, POLYIMIDE-INSULATED,

More information

THE ACTIVITY RESPONSIBLE FOR THIS QPL IS THE DEFENSE SUPPLY CENTER COLUMBUS (DSCC-VQ), COLUMBUS, OH

THE ACTIVITY RESPONSIBLE FOR THIS QPL IS THE DEFENSE SUPPLY CENTER COLUMBUS (DSCC-VQ), COLUMBUS, OH S VALIDATED EVERY TWO YEARS 04-Feb-04 SUPERSEDING QPL-13486-25 07-Jul-03 QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER DETAIL SPECIFICATION MIL-DTL-13486 CABLES, SPECIAL PURPOSE, ELECTRICAL: LOW-TENSION,

More information

EVERY 18 MONTHS 24 August 1998 SUPERSEDING QPL November 1997 QUALIFIED PRODUCTS LIST PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATION

EVERY 18 MONTHS 24 August 1998 SUPERSEDING QPL November 1997 QUALIFIED PRODUCTS LIST PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATION QUALIFICATIONS VALIDATED EVERY 18 MONTHS 24 August 1998 SUPERSEDING QPL-82528-33 19 November 1997 QUALIFIED PRODUCTS LIST PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATION OF MIL-G-83528 GASKETING MATERIAL,

More information

EVERY 18 MONTHS 19 November 1997 SUPERSEDING QPL September 1997 QUALIFIED PRODUCTS LIST PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATION

EVERY 18 MONTHS 19 November 1997 SUPERSEDING QPL September 1997 QUALIFIED PRODUCTS LIST PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATION QUALIFICATIONS VALIDATED EVERY 18 MONTHS 19 November 1997 SUPERSEDING QPL-82528-32 9 September 1997 QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATION MIL-G-83528 GASKETING MATERIAL,

More information

EVERY 18 MONTHS 23 July 2001 SUPERSEDING QPL March 2001 QUALIFIED PRODUCTS LIST PRODUCTS QUALIFIED UNDER DETAIL SPECIFICATION MIL-DTL-83528

EVERY 18 MONTHS 23 July 2001 SUPERSEDING QPL March 2001 QUALIFIED PRODUCTS LIST PRODUCTS QUALIFIED UNDER DETAIL SPECIFICATION MIL-DTL-83528 QUALIFICATIONS VALIDATED EVERY 18 MONTHS 23 July 2001 SUPERSEDING QPL-82528-37 2 March 2001 QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER DETAIL SPECIFICATION MIL-DTL-83528 GASKETING MATERIAL, CONDUCTIVE,

More information

QUALIFICATIONS VALIDATED ANNUALLY 21 April 1998 SUPERSEDING QPL June 1997 QUALIFIED PRODUCTS LIST

QUALIFICATIONS VALIDATED ANNUALLY 21 April 1998 SUPERSEDING QPL June 1997 QUALIFIED PRODUCTS LIST QUALIFICATIONS VALIDATED ANNUALLY 21 April 1998 SUPERSEDING QPL-17-161 3 June 1997 QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATION MIL-C-17 CABLE, RADIO FREQUENCY, FLEXIBLE AND

More information

MILLITARY SPECIFICATION SHEET

MILLITARY SPECIFICATION SHEET INCH-POUND MILLITARY SPECIFICATION SHEET 10 November 2000 SUPERSEDING MIL-R-6106/14B 10 March 1989 RELAY, ELECTRIC, PERMANENT DRIVE, 50 AMP, SPDT (DB) DOUBLE MAKE DOUBLE BREAK AUXILIARY CONTACTS (5 AMP),

More information

DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, CIRCULAR, RECEPTACLE, THREADED, JAM-NUT MOUNTING, REMOVABLE CRIMP CONTACTS, SERIES III, METRIC

DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, CIRCULAR, RECEPTACLE, THREADED, JAM-NUT MOUNTING, REMOVABLE CRIMP CONTACTS, SERIES III, METRIC METRIC MIL-DTL-38999/24J 10 April 2015 SUPERSEDING MIL-DTL-38999/24J 31 October 2011 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, CIRCULAR, RECEPTACLE, THREADED, JAM-NUT MOUNTING, REMOVABLE CRIMP

More information

DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, CIRCULAR, RECEPTACLE, THREADED, JAM-NUT MOUNTING, REMOVABLE CRIMP CONTACTS, SERIES III, METRIC

DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, CIRCULAR, RECEPTACLE, THREADED, JAM-NUT MOUNTING, REMOVABLE CRIMP CONTACTS, SERIES III, METRIC METRIC MIL-DTL-38999/24J 31 October 2011 SUPERSEDING MIL-DTL-38999/24H 10 July 2008 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, CIRCULAR, RECEPTACLE, THREADED, JAM-NUT MOUNTING, REMOVABLE CRIMP

More information

DLA Land and Maritime - VQ Supplemental Information Sheet for Electronic QPL-20

DLA Land and Maritime - VQ Supplemental Information Sheet for Electronic QPL-20 Specification Details: Specification: MIL-PRF-20 Title: Capacitor, Fixed, Ceramic Dielectric, Temperature Compensating Federal Supply Class (FSC): 5910 Conventional: Yes Specification contains quality

More information

PERFORMANCE SPECIFICATION SHEET

PERFORMANCE SPECIFICATION SHEET INCH-POUND 5 October 2016 SUPERSEDING w/amendment 2 July 2016 PERFORMANCE SPECIFICATION SHEET CONNECTORS, PLUG, ELECTRICAL, COAXIAL, RADIO FREQUENCY, SERIES SMA (CABLED) PIN CONTACT, RIGHT ANGLE, CLASS

More information

PERFORMANCE SPECIFICATION SHEET CONNECTORS, PLUGS, ELECTRICAL, COAXIAL, RADIO FREQUENCY (SERIES SMA (CABLED) - PLUG, PIN CONTACT, CLASS 2)

PERFORMANCE SPECIFICATION SHEET CONNECTORS, PLUGS, ELECTRICAL, COAXIAL, RADIO FREQUENCY (SERIES SMA (CABLED) - PLUG, PIN CONTACT, CLASS 2) INCH-POUND MIL-PRF-39012/55G 6 February 2008 SUPERSEDING MIL-PRF-39012/55G 6 January 2006 PERFORMANCE SPECIFICATION SHEET CONNECTORS, PLUGS, ELECTRICAL, COAXIAL, RADIO FREQUENCY (SERIES SMA (CABLED) -

More information

DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, CIRCULAR, RECEPTACLE, THREADED, DUMMY STOWAGE, SERIES III, METRIC

DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, CIRCULAR, RECEPTACLE, THREADED, DUMMY STOWAGE, SERIES III, METRIC METRIC MIL-DTL-38/22J 18 February 2015 SUPERSEDING MIL-DTL-38/22H 14 June 2013 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, CIRCULAR, RECEPTACLE, THREADED, DUMMY STOWAGE, SERIES III, METRIC This

More information

MILITARY SPECIFICATION SHEET

MILITARY SPECIFICATION SHEET INCH POUND MIL-S-22885/100A 16 May 2003 SUPERSEDING MIL-S-22885/100 (USAF) 27 August 1982 MILITARY SPECIFICATION SHEET SWITCH, PUSH BUTTON, ILLUMINATED, 4-LAMP, SPDT AND DPDT, 7.5 AMPERES, SILVER CONTACTS,

More information

PERFORMANCE SPECIFICATION SHEET

PERFORMANCE SPECIFICATION SHEET INCH-POUND MIL-PRF-19978/9C 11 March 2004 SUPERSEDING MIL-PRF-19978/9C 27 May 1999 PERFORMANCE SPECIFICATION SHEET CAPACITORS, FIXED, PLASTIC (OR PAPER-PLASTIC) DIELECTRIC, AXIAL-WIRE TERMINAL, TUBULAR

More information

PERFORMANCE SPECIFICATION SHEET CONNECTORS, PLUGS, ELECTRICAL, COAXIAL RADIO FREQUENCY, (SERIES TNC (CABLED), PIN CONTACT, RIGHT ANGLE, CLASS 2)

PERFORMANCE SPECIFICATION SHEET CONNECTORS, PLUGS, ELECTRICAL, COAXIAL RADIO FREQUENCY, (SERIES TNC (CABLED), PIN CONTACT, RIGHT ANGLE, CLASS 2) INCH-POUND MIL-PRF-39012/30H 15 March 2018 SUPERSEDING MIL-PRF-39012/30H w/amendment 3 15 April 2017 PERFORMANCE SPECIFICATION SHEET CONNECTORS, PLUGS, ELECTRICAL, COAXIAL RADIO FREQUENCY, (SERIES TNC

More information

PERFORMANCE SPECIFICATION SHEET CONNECTORS, PLUGS, ELECTRICAL, COAXIAL RADIO FREQUENCY, (SERIES BNC (CABLED), PIN CONTACT, CLASS 2)

PERFORMANCE SPECIFICATION SHEET CONNECTORS, PLUGS, ELECTRICAL, COAXIAL RADIO FREQUENCY, (SERIES BNC (CABLED), PIN CONTACT, CLASS 2) PERFORMANCE SPECIFICATION SHEET MIL-PRF-39012/16H 03 January 2017 SUPERSEDING MIL-PRF-39012/16H w/amendment 1 20 April 2009 CONNECTORS, PLUGS, ELECTRICAL, COAXIAL RADIO FREQUENCY, (SERIES BNC (CABLED),

More information

INCH-POUND MIL-PRF-39012/29H w/amendment 3 25 January 2018 SUPERSEDING MIL-PRF-39012/29H w/amendment 2 21 November 2016

INCH-POUND MIL-PRF-39012/29H w/amendment 3 25 January 2018 SUPERSEDING MIL-PRF-39012/29H w/amendment 2 21 November 2016 INCH-POUND MIL-PRF-39012/29H 25 January 2018 SUPERSEDING MIL-PRF-39012/29H w/amendment 2 21 November 2016 PERFORMANCE SPECIFICATION SHEET CONNECTORS, RECEPTACLE, ELECTRICAL, COAXIAL, RADIO FREQUENCY, (SERIES

More information

PERFORMANCE SPECIFICATION SHEET CONNECTORS, PLUGS, ELECTRICAL, COAXIAL RADIO FREQUENCY, (SERIES BNC (CABLED), PIN CONTACT, CLASS 2)

PERFORMANCE SPECIFICATION SHEET CONNECTORS, PLUGS, ELECTRICAL, COAXIAL RADIO FREQUENCY, (SERIES BNC (CABLED), PIN CONTACT, CLASS 2) INCH-POUND MIL-PRF-39012/16H 16 November 2006 SUPERSEDING MIL-PRF-39012/16G 26 September 1994 PERFORMANCE SPECIFICATION SHEET CONNECTORS, PLUGS, ELECTRICAL, COAXIAL RADIO FREQUENCY, (SERIES BNC (CABLED),

More information

DETAIL SPECIFICATION SHEET CONNECTORS, PLUG, ELECTRICAL, RFI SHIELDED, SERIES 2, CRIMP TYPE, BAYONET COUPLING, CLASSES A, D, L, T, W AND K

DETAIL SPECIFICATION SHEET CONNECTORS, PLUG, ELECTRICAL, RFI SHIELDED, SERIES 2, CRIMP TYPE, BAYONET COUPLING, CLASSES A, D, L, T, W AND K INCH-POUND MS3475G 27 October 2015 SUPERSEDING MS3475G 11 March 2015 DETAIL SPECIFICATION SHEET CONNECTORS, PLUG, ELECTRICAL, RFI SHIELDED, SERIES 2, CRIMP TYPE, BAYONET COUPLING, CLASSES A, D, L, T, W

More information

INCH-POUND MIL-PRF-39012/28H w/amendment 4 25 January 2018 SUPERSEDING MIL-PRF-39012/28H w/amendment 3 15 April 2017

INCH-POUND MIL-PRF-39012/28H w/amendment 4 25 January 2018 SUPERSEDING MIL-PRF-39012/28H w/amendment 3 15 April 2017 INCH-POUND MIL-PRF-39012/28H 25 January 2018 SUPERSEDING MIL-PRF-39012/28H w/amendment 3 15 April 2017 PERFORMANCE SPECIFICATION SHEET CONNECTORS, RECEPTACLES, ELECTRICAL, COAXIAL, RADIO FREQUENCY, (SERIES

More information

ATC 600S Series Ultra-Low ESR, High Q, NPO RF & Microwave Capacitors

ATC 600S Series Ultra-Low ESR, High Q, NPO RF & Microwave Capacitors ATC 600S Series Ultra-Low ESR, High Q, NPO RF & Microwave Capacitors Features: Lowest ESR in Class Highest Working Voltage in class 250V Standard EIA Size: 0603 Laser Marking (Optional) High Self Resonance

More information

ATC 600S Series Ultra-Low ESR, High Q, NPO RF & Microwave Capacitors

ATC 600S Series Ultra-Low ESR, High Q, NPO RF & Microwave Capacitors ATC 600S Series Ultra-Low ESR, High Q, NPO RF & Microwave Capacitors Features: Lowest ESR in Class Highest Working Voltage in class 250V Standard EIA Size: 0603 Laser Marking (Optional) RoHS Compliant

More information

SEMIANNUALLY 18 December 1996 SUPERSEDING QPL April 1996 QUALIFIED PRODUCTS LIST PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATION

SEMIANNUALLY 18 December 1996 SUPERSEDING QPL April 1996 QUALIFIED PRODUCTS LIST PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATION QUALIFICATIONS VALIDATED SEMIANNUALLY 18 December 1996 SUPERSEDING QPL-55342-70 5 April 1996 QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATION MIL-R-55342 RESISTORS, FIXED, FILM,

More information

PERFORMANCE SPECIFICATION SHEET ELECTRON TUBE, CATHODE RAY TYPE 7AGP19

PERFORMANCE SPECIFICATION SHEET ELECTRON TUBE, CATHODE RAY TYPE 7AGP19 INCH-POUND MIL-PRF-1/1178E 22 July 1999 SUPERSEDING MIL-E-1/1178D(EC) 23 December 1976 PERFORMANCE SPECIFICATION SHEET ELECTRON TUBE, CATHODE RAY TYPE 7AGP19 This specification is approved for use by all

More information

The requirements for acquiring the product described herein shall consist of this specification sheet and FF-N-836.

The requirements for acquiring the product described herein shall consist of this specification sheet and FF-N-836. INCH-POUND MS31E 23 March 200 MS31D 2 August 184 MILITARY SPECIFICATION SHEET NUT, PLAIN, HEXAGON (JAM) UNC-2B AND UNF-2B Reactivated after 23 March 200 and may be used for new and existing designs and

More information

INCH-POUND MIL-PRF-55629/21G 10 March 2010 SUPERSEDING MIL-PRF-55629/21F 21 September 2005 PERFORMANCE SPECIFICATION SHEET

INCH-POUND MIL-PRF-55629/21G 10 March 2010 SUPERSEDING MIL-PRF-55629/21F 21 September 2005 PERFORMANCE SPECIFICATION SHEET PERFORMANCE SPECIFICATION SHEET INCH-POUND 0 March 200 SUPERSEDING MIL-PRF-629/2F 2 September 200 CIRCUIT BREAKERS, MAGNETIC, PANEL SEAL, TRIP-FREE, SERIES TRIP, DOUBLE POLE (0.2 TO 0 AMPERES) This specification

More information

PERFORMANCE SPECIFICATION ELECTRON TUBES GENERAL SPECIFICATION FOR

PERFORMANCE SPECIFICATION ELECTRON TUBES GENERAL SPECIFICATION FOR PERFORMANCE SPECIFICATION INCH-POUND MIL-PRF-1N 12 October 2011 SUPERSEDING MIL-PRF-1M 9 May 2003 ELECTRON TUBES GENERAL SPECIFICATION FOR This specification is approved for use by all Departments and

More information

Military Glass Capacitors

Military Glass Capacitors 1 Glass/Glass-K Capacitors GASS CAPACITOR MI-PRF-23269 ESTABISHED REIABIITY M AND S FAIURE RATE EVE 100V, 300V, 0V CYR10, CYR15, CYR20, CYR30 CYR51, CYR52, CYR53 Slash Sheets /01, 3001-3126, 7001-7126

More information

EVAL-RHF1009A. EVAL-RHF1009A product evaluation board. Description. Features

EVAL-RHF1009A. EVAL-RHF1009A product evaluation board. Description. Features product evaluation board Data brief R3 (cathode) resistor set to 6.8 kω, with a power supply voltage of 3.3 V this gives a cathode current of about 110 μa If RHF1009A device is soldered onto the, Cn1 is

More information

AMERICAN NATIONAL STANDARD

AMERICAN NATIONAL STANDARD ENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD ANSI/SCTE 153 2008 Drop Passives: Splitters, Couplers and Power Inserters NOTICE The Society of Cable Telecommunications

More information

PERFORMANCE SPECIFICATION SHEET

PERFORMANCE SPECIFICATION SHEET INCH-POUND MIL-PRF-22885/111A 5 September 2000 SUPERSEDING MIL-PRF-22885/111(EC) 14 August 1992 PERFORMANCE SPECIFICATION SHEET SWITCHES, PUSHBUTTON, LIGHT EMITTING DIODE (LED) ILLUMINATED, STANDARD, NIGHT

More information

PERFORMANCE SPECIFICATION SHEET

PERFORMANCE SPECIFICATION SHEET INCH-POUND MIL-PRF-39012/2H 20 December 2016 SUPERSEDING MIL-PRF-39012/2H w/mendment 3 12 March 2012 PERFORMNCE SPECIFICTION SHEET CONNECTORS, PLUGS ND RECEPTCLES, ELECTRICL, COXIL, RDIO FREQUENCY, (SERIES

More information

Mechanical specification. October 2010 Doc ID Rev 1 1/10

Mechanical specification. October 2010 Doc ID Rev 1 1/10 Portable UHF 2-way radio demonstration board based on the PD84001 Preliminary data Features Excellent thermal stability Frequency: 380-520 MHz Supply voltage: 7.2 V Output power: 1 W Power gain: 15.5 ±

More information

Trusted 40 Channel 120 Vac Digital Input FTA

Trusted 40 Channel 120 Vac Digital Input FTA ICSTT-RM290F-EN-P (PD-T8824) Trusted Product Overview The Trusted 40 Channel 120 Vac Digital Input Field Termination Assembly (FTA) T8824 is designed to act as the main interface between a field device

More information

TEST WIRE FOR HIGH VOLTAGE POWER SUPPLY CROWBAR SYSTEM

TEST WIRE FOR HIGH VOLTAGE POWER SUPPLY CROWBAR SYSTEM TEST WIRE FOR HIGH VOLTAGE POWER SUPPLY CROWBAR SYSTEM Joseph T. Bradley III and Michael Collins Los Alamos National Laboratory, LANSCE-5, M.S. H827, P.O. Box 1663 Los Alamos, NM 87545 John M. Gahl, University

More information

General purpose low noise wideband amplifier for frequencies between DC and 2.2 GHz

General purpose low noise wideband amplifier for frequencies between DC and 2.2 GHz Rev. 5 29 May 2015 Product data sheet 1. Product profile 1.1 General description Silicon Monolitic Microwave Integrated Circuit (MMIC) wideband amplifier with internal matching circuit in a 6-pin SOT363

More information

-Technical Specifications-

-Technical Specifications- Annex I to Contract 108733 NL-Petten: the delivery, installation, warranty and maintenance of one (1) X-ray computed tomography system at the JRC-IET -Technical Specifications- INTRODUCTION In the 7th

More information

Obsolete Product(s) - Obsolete Product(s)

Obsolete Product(s) - Obsolete Product(s) L6563 80W High performancetm PFC with active tracking boost function General description Data Brief L6563 is a current-mode PFC controller operating in Transition Mode (TM). Based on the core of a standard

More information

NEMA Standards Publication WC Performance Standard for Twisted Pair Premise Voice and Data Communications Cables

NEMA Standards Publication WC Performance Standard for Twisted Pair Premise Voice and Data Communications Cables NEMA Standards Publication WC 63.1-2005 Performance Standard for Twisted Pair Premise Voice and Data Communications Cables Published by: National Electrical Manufacturers Association 1300 North 17th Street,

More information

NEMA Standards Publication WC Performance Standard for Twisted Pair Premise Voice and Data Communications Cables

NEMA Standards Publication WC Performance Standard for Twisted Pair Premise Voice and Data Communications Cables NEMA Standards Publication Performance Standard for Twisted Pair Premise Voice and Data Communications Cables Published by: National Electrical Manufacturers Association 1300 North 17th Street, Suite 1752

More information

American National Standard for Aerospace and Industrial Electrical Cable

American National Standard for Aerospace and Industrial Electrical Cable American National Standard for Aerospace and Industrial Electrical Cable Secretariat: National Electrical Manufacturers Association Approved: January 7, 2015 Published: June 1, 2015 American National Standards

More information

Parameter Input Output Min Typ Max Diode Option (GHz) (GHz) Input drive level (dbm)

Parameter Input Output Min Typ Max Diode Option (GHz) (GHz) Input drive level (dbm) MMD3HSM The MMD3HSM is a passive double balanced MMIC doubler covering to 3 GHz on the output. It features excellent conversion loss, superior isolations and harmonic suppressions across a broad bandwidth,

More information

RDNS-CFF 27 September 2013

RDNS-CFF 27 September 2013 27 September 2013 TO: DLA Troop Support - Subsistence DSCP-FTRE Date received: 26 September 2013 Date due: 25 December 2013 Date replied: 27 September 2013 1. Natick requests changes to affected food product

More information

The NorCal SMT Dummy Load Assembly and Operating Manual Rev. 1.0 January 4, 2005

The NorCal SMT Dummy Load Assembly and Operating Manual Rev. 1.0 January 4, 2005 The NorCal SMT Dummy Load Assembly and Operating Manual Rev. 1.0 January 4, 2005 Copyright 2005 W3CD 1 1. Introduction The NorCal SMT Dummy Load is a practice kit for anyone wishing to gain some experience

More information

Downloaded from

Downloaded from EEEEI 23 FEB 1990 MILITARY SPECIFICATION CABLE, POWER, ELECTRICAL AND CABLE SPECIAL F URPOSE, ELECTRICAL SHIELDED AND UNSHIELDED, GENERAL SPECIFICATION FOR This amendment forms a part, of MIL-C-27SOOG,

More information

DETAIL SPECIFICATION SHEET CONNECTORS, RECEPTACLE, ELECTRICAL, SOLDER OR WELDED FLANGE MOUNT, BAYONET COUPLING, SOLDER PIN CONTACT, CLASS H, SERIES 2

DETAIL SPECIFICATION SHEET CONNECTORS, RECEPTACLE, ELECTRICAL, SOLDER OR WELDED FLANGE MOUNT, BAYONET COUPLING, SOLDER PIN CONTACT, CLASS H, SERIES 2 INCH-POUND 14 January 2011 SUPERSEDING MS3443B 1 March 2007 DETAIL SPECIFICATION SHEET CONNECTORS, RECEPTACLE, ELECTRICAL, SOLDER OR WELDED FLANGE MOUNT, BAYONET COUPLING, SOLDER PIN CONTACT, CLASS H,

More information

STATE OF OHIO DEPARTMENT OF TRANSPORTATION SUPPLEMENTAL SPECIFICATION 872 LIGHT EMITTING DIODE TRAFFIC SIGNAL LAMP UNITS JULY 19, 2002

STATE OF OHIO DEPARTMENT OF TRANSPORTATION SUPPLEMENTAL SPECIFICATION 872 LIGHT EMITTING DIODE TRAFFIC SIGNAL LAMP UNITS JULY 19, 2002 STATE OF OHIO DEPARTMENT OF TRANSPORTATION SUPPLEMENTAL SPECIFICATION 872 LIGHT EMITTING DIODE TRAFFIC SIGNAL LAMP UNITS JULY 19, 02 872.01 Description 872.02 Prequalification 872.03 Material Requirements

More information

DEPARTMENT OF DEFENSE STANDARD PRACTICE

DEPARTMENT OF DEFENSE STANDARD PRACTICE INCH-POUND MIL-STD-61F May 014 SUPERSEDING MIL-STD-61F 7 March 01 DEPARTMENT OF DEFENSE STANDARD PRACTICE IDENTIFICATION CODING AND APPLICATION OF HOOKUP AND LEAD WIRE AMSC N/A FSC 6145 FOREWORD 1. This

More information

PRODUCT INFORMATION LETTER

PRODUCT INFORMATION LETTER PRODUCT INFORMATION LETTER PIL APG-MID/14/8431 Dated 21 Apr 2014 BOLERO FAMILY : ERRATA SHEET Update 1/6 PIL APG-MID/14/8431 - Dated 21 Apr 2014 Sales Type/product family label Type of change Reason for

More information

Trusted 40 Channel 120 Vac Digital Input FTA

Trusted 40 Channel 120 Vac Digital Input FTA PD-T8824 Trusted Trusted 40 Channel 120 Vac Digital Input FTA Product Overview The Trusted 40 Channel 120 Vac Digital Input Field Termination Assembly (FTA) T8824 is designed to act as the main interface

More information

AC Line Rated Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC

AC Line Rated Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC AC Line Rated Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC EATURES Complying with IEC 60384-14, 3 rd edition High reliability Vertical (inline) kinked or straight leads Material categorization:

More information

Parameter Input Output Min Typ Max Diode Option (GHz) (GHz) Input drive level (dbm)

Parameter Input Output Min Typ Max Diode Option (GHz) (GHz) Input drive level (dbm) MMD3H The MMD3H is a passive double balanced MMIC doubler covering 1 to 3 GHz on the output. It features excellent conversion loss, superior isolations and harmonic suppressions across a broad bandwidth,

More information

Rendering Human Readable Contracts in the Uniform Contract Format from Procurement Data Standard Contract Data Version 2.3

Rendering Human Readable Contracts in the Uniform Contract Format from Procurement Data Standard Contract Data Version 2.3 Rendering Human Readable Contracts in the Uniform Contract Format from Procurement Data Standard Contract Data Version 2.3 This document is intended to capture information about how to render human readable

More information

Australian and New Zealand Energy Performance and Marking Requirements for External Power Supplies

Australian and New Zealand Energy Performance and Marking Requirements for External Power Supplies FACT SHEET October 2008 Australian and New Zealand Energy Performance and Marking Requirements for External Power Supplies Minimum Energy Performance Standards (MEPS) Implementation dates Australia - 1

More information

The Next Generation Connector

The Next Generation Connector The Next Generation Connector This paper describes a new harsh environment fiber optic connector system designed primarily for use on military shipboard and avionics platforms. The Next Generation Connector

More information

DETAIL SPECIFICATION SHEET CONNECTOR, FIBER OPTIC PLUG, CIRCULAR HERMAPHRODITIC, IN-LINE MOUNT, 2 AND 4 POSITIONS, EXPANDED BEAM

DETAIL SPECIFICATION SHEET CONNECTOR, FIBER OPTIC PLUG, CIRCULAR HERMAPHRODITIC, IN-LINE MOUNT, 2 AND 4 POSITIONS, EXPANDED BEAM METRIC 23 September 2014 SUPERSEDING B 20 June 2013 DETAIL SPECIFICATION SHEET CONNECTOR, FIBER OPTIC PLUG, CIRCULAR HERMAPHRODITIC, IN-LINE MOUNT, 2 AND 4 POSITIONS, EPANDED BEAM This specification is

More information

STEVAL-TDR020V1. Portable UHF 2-way radio demonstration board based on the PD84006L-E. Features. Description

STEVAL-TDR020V1. Portable UHF 2-way radio demonstration board based on the PD84006L-E. Features. Description Portable UHF 2-way radio demonstration board based on the PD84006L-E Features Excellent thermal stability Frequency: 740-950 MHz Supply voltage: 7.2 V Output power: 4 W Power gain: 12.3 ± 0.3 db Efficiency:

More information

MICROLITHIC DOUBLE-BALANCED MIXER

MICROLITHIC DOUBLE-BALANCED MIXER ML1-185 The ML1-185 is a Microlithic double balanced mixer. As with all Microlithic mixers (patent pending), it features excellent conversion loss, isolations, and spurious performance across a broad bandwidth

More information

MICROLITHIC DOUBLE-BALANCED I/Q MIXER

MICROLITHIC DOUBLE-BALANCED I/Q MIXER MLIQ18 The MLIQ18 is a miniaturized, multi-octave 2-18 GHz IQ mixer. It features matched double balanced mixers connected with an integrated LO hybrid and RF power divider. It can be used for either up

More information

STEVAL-IHM021V W, 3-phase inverter based on the L6390 and UltraFASTmesh MOSFET for speed FOC of 3-phase PMSM motor drives. Features.

STEVAL-IHM021V W, 3-phase inverter based on the L6390 and UltraFASTmesh MOSFET for speed FOC of 3-phase PMSM motor drives. Features. 100 W, 3-phase inverter based on the L6390 and UltraFASTmesh MOSFET for speed FOC of 3-phase PMSM motor drives Features Data brief Wide range input voltage Maximum power: up to 100 W at 230 Vac input STD5N52U

More information

Surface Mount Multilayer Ceramic Chip Capacitors for High Frequency

Surface Mount Multilayer Ceramic Chip Capacitors for High Frequency Surface Mount Multilayer Ceramic Chip Capacitors for High Frequency ELECTRICAL SPECIFICATIONS Note Electrical characteristics at 25 C unless otherwise specified FEATURES Case size 0402, 0603, 0805 Available

More information

IMS Brochure. Integrated Management System (IMS) of the ILF Group

IMS Brochure. Integrated Management System (IMS) of the ILF Group Br ochur e IMS Brochure Integrated Management System (IMS) of the ILF Group FOREWORD ILF Consulting Engineers always endeavours to precisely analyse the requests and needs of its customers and to subsequently

More information

This Chapter does not apply to applications and decisions on, development on land reserved in corridor maps.

This Chapter does not apply to applications and decisions on, development on land reserved in corridor maps. 1560 1561 1562 1563 1564 1565 1566 1567 1568 1569 1570 1571 1572 1573 1574 1575 1576 1577 1578 1579 1580 1581 1582 1583 1584 1585 1586 1587 1588 1589 1590 1591 1592 1593 1594 1595 1596 1597 1598 1599 1600

More information

Tender Notification for the procurement of a Scanning Electron Microscope" at IISc (Last Date for submission of tenders: 3 rd October 2018)

Tender Notification for the procurement of a Scanning Electron Microscope at IISc (Last Date for submission of tenders: 3 rd October 2018) Tender Notification for the procurement of a Scanning Electron Microscope" at IISc (Last Date for submission of tenders: 3 rd October 2018) Dear Sir/Madam, We are looking for a high-resolution scanning

More information

COVER PAGE FOR TEST REPORT

COVER PAGE FOR TEST REPORT Issue Date: 2009-04-28 Page 1 of 3 Report Reference # E132002-A94-UL-1 COVER PAGE FOR TEST REPORT Product Category: Product Category CCN: Test Procedure: Product: Model/Type Reference: Rating(s): Power

More information

STEVAL-TDR021V1. Demonstration board using the PD84008L-E for 900 MHz 2-way radio. Features. Description

STEVAL-TDR021V1. Demonstration board using the PD84008L-E for 900 MHz 2-way radio. Features. Description Demonstration board using the PD84008L-E for 900 MHz 2-way radio Features Excellent thermal stability Frequency: 740-950 MHz Supply voltage: 7.2 V Output power: 5 W Power gain: 11 ± 1.0 db Efficiency:

More information

DETAIL SPECIFICATION PANELS, INFORMATION, INTEGRALLY ILLUMINATED

DETAIL SPECIFICATION PANELS, INFORMATION, INTEGRALLY ILLUMINATED INCH-POUND 18 October 2011 SUPERSEDING MIL-DTL-7788G 15 October 2010 DETAIL SPECIFICATION PANELS, INFORMATION, INTEGRALLY ILLUMINATED This specification is approved for use by all Departments and Agencies

More information

AN4184 Application note

AN4184 Application note Application note Microphone coupon boards STEVAL-MKI129Vx /MKI155Vx based on digital microphones Introduction This application note briefly describes the microphone coupon boards STEVAL-MKI129Vx / MKI155Vx

More information

Drop Passives: Splitters, Couplers and Power Inserters

Drop Passives: Splitters, Couplers and Power Inserters ENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD ANSI/SCTE 153 2016 Drop Passives: Splitters, Couplers and Power Inserters NOTICE The Society of Cable Telecommunications

More information

MICROLITHIC DOUBLE-BALANCED I/Q MIXER

MICROLITHIC DOUBLE-BALANCED I/Q MIXER The is a miniaturized, multi-octave 185 GHz IQ mixer. It features matched double balanced mixers connected with an integrated LO hybrid and RF power divider. It can be used for either up or downconversion.

More information

AMERICAN NATIONAL STANDARD

AMERICAN NATIONAL STANDARD Interface Practices Subcommittee AMERICAN NATIONAL STANDARD ANSI/SCTE 129 2017 Drop Passives: Bonding Blocks (Without Surge Protection) NOTICE The Society of Cable Telecommunications Engineers (SCTE) Standards

More information

Surface Mount Multilayer Ceramic Chip Capacitors for High Temperatures 200 C

Surface Mount Multilayer Ceramic Chip Capacitors for High Temperatures 200 C Surface Mount Multilayer Ceramic Chip Capacitors for High Temperatures 200 C DESIGN TOOLS (click logo to get started) FEATURES Case size 0402, 0505, 0603, 0805, Available High frequency / high temperature

More information

OPERATION AND MAINTENANCE MANUAL

OPERATION AND MAINTENANCE MANUAL OPERATION AND MAINTENANCE MANUAL SERIAL NUMBER CUSTOMER: SALES REP.: CONTENTS Mixer Installation / Assembly / Dimension Drawings Safety... 1 Customer Service Contact... 1 Initial Inspection... 2 Installation...2

More information

Document Copyrights. Disclaimer

Document Copyrights. Disclaimer Document Copyrights Copyright 00 by Kenwood Corporation. All rights reserved. No part of this manual may be reproduced, translated, distributed, or transmitted in any form or by any means, electronic,

More information

Digital signature documents on Sourcing Tender System

Digital signature documents on Sourcing Tender System Digital signature documents on Sourcing Tender System Supplier handbook - Digital tenders Document objectives and structure This document aims to support suppliers involved in digital tenders during the

More information

Australian Standard. Rotating electrical machines General requirements. Part 30: Preferred outputs and frame sizes AS

Australian Standard. Rotating electrical machines General requirements. Part 30: Preferred outputs and frame sizes AS AS 1359.30 1997 Australian Standard Rotating electrical machines General requirements Part 30: Preferred outputs and frame sizes This Australian Standard was prepared by Committee EL/9, Rotating Electrical

More information

General purpose low noise wideband amplifier for frequencies between DC and 2.2 GHz

General purpose low noise wideband amplifier for frequencies between DC and 2.2 GHz Rev. 1 20 October 2011 Product data sheet 1. Product profile 1.1 General description Silicon Monolithic Microwave Integrated Circuit (MMIC) wideband amplifier with internal matching circuit in a 6-pin

More information

QUICK START GUIDE FOR DEMONSTRATION CIRCUIT /12/14 BIT 10 TO 105 MSPS ADC

QUICK START GUIDE FOR DEMONSTRATION CIRCUIT /12/14 BIT 10 TO 105 MSPS ADC LTC2280, LTC2282, LTC2284, LTC2286, LTC2287, LTC2288 LTC2289, LTC2290, LTC2291, LTC2292, LTC2293, LTC2294, LTC2295, LTC2296, LTC2297, LTC2298 or LTC2299 DESCRIPTION Demonstration circuit 851 supports a

More information

CERTIFICATE OF TYPE APPROVAL (EC Certificate of Type Examination - Module B) (Marine Equipment Directive - 96/98/EC, as amended *1)

CERTIFICATE OF TYPE APPROVAL (EC Certificate of Type Examination - Module B) (Marine Equipment Directive - 96/98/EC, as amended *1) NOTIFIED BODY No 0191 CERTIFICATE OF TYPE APPROVAL (EC Certificate of Type Examination - Module B) (Marine Equipment Directive - 96/98/EC, as amended *1) Applicant:- Kelvin Hughes Ltd New North Road, Hainault

More information

MICROLITHIC DOUBLE-BALANCED MIXER

MICROLITHIC DOUBLE-BALANCED MIXER M1-638 The M1-638 is a Microlithic double balanced mixer. As with all Microlithic mixers (patent pending), it features excellent conversion loss, isolations, and spurious performance across a broad bandwidth

More information

FCC Part 15B Test Report

FCC Part 15B Test Report Shenzhen Toby Technology Co., Ltd. Report No.: TB-FCC111757 Page: 1 of 18 FCC Part 15B Test Report Application No. : TB11081419 Applicant : Ingtron Enterprise Co., Ltd. Equipment Under Test (EUT) EUT Name

More information

GaAs DOUBLE-BALANCED MIXER

GaAs DOUBLE-BALANCED MIXER MM1-124S The MM1-124S is a passive double balanced MMIC mixer. It features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth, in a highly miniaturized form

More information

Main components Narrow-band OFDM power line networking PRIME compliant system-on-chip

Main components Narrow-band OFDM power line networking PRIME compliant system-on-chip DN0025 Design note Maximize Power Line Communication signal level on ST7590 PRIME compliant applications Designs from our labs describe tested circuit designs from ST labs which provide optimized solutions

More information

MICROLITHIC DOUBLE-BALANCED MIXER

MICROLITHIC DOUBLE-BALANCED MIXER ML1-936 The ML1-936 is a Microlithic double balanced mixer. As with all Microlithic mixers (patent pending), it features excellent conversion loss, isolations, and spurious performance across a broad bandwidth

More information

INR PRICE LIST. No. DFL/07. Effective 15 May, 2012.

INR PRICE LIST. No. DFL/07. Effective 15 May, 2012. INR PRICE LIST No. DFL/07 th Effective 1 May, 1. Limited Warranty And Exclusive Remedy Deepak Fasteners through its Unbrako Division warrants that these products conform to industry standards specified

More information

GaAs MMIC Double Balanced Mixer

GaAs MMIC Double Balanced Mixer Page 1 The is a highly linear passive GaAs double balanced MMIC mixer suitable for both up and down-conversion applications. As with all Marki Microwave mixers, it features excellent conversion loss, isolation

More information

GaAs DOUBLE-BALANCED MIXER

GaAs DOUBLE-BALANCED MIXER MM1-185H The MM1-185H is a passive double balanced MMIC mixer. It features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth, in a highly miniaturized form

More information

MESP TECHNICAL SPECIFICATION FOR ELECTRIC CABLE 400mm 2 ALUMINIUM CONDUCTOR 1.9kV XLPE INSULATED WITHOUT METALLIC SCREEN

MESP TECHNICAL SPECIFICATION FOR ELECTRIC CABLE 400mm 2 ALUMINIUM CONDUCTOR 1.9kV XLPE INSULATED WITHOUT METALLIC SCREEN Engineering Specification Electrical Networks MESP 030000-02 TECHNICAL SPECIFICATION FOR ELECTRIC CABLE 400mm 2 ALUMINIUM CONDUCTOR 1.9kV XLPE INSULATED Version: 1 Issued: March 2014 Owner: Electrical

More information

GaAs DOUBLE-BALANCED MIXER

GaAs DOUBLE-BALANCED MIXER The MM1-312S is a high linearity passive double balanced MMIC mixer. The S diode offers superior 1 db compression, two tone intermodulation performance, and spurious suppression to other GaAs MMIC mixers.

More information

DM Segment Decoder Driver Latch with Constant Current Source Outputs

DM Segment Decoder Driver Latch with Constant Current Source Outputs DM9368 7-Segment Decoder Driver Latch with Constant Current Source Outputs General Description The DM9368 is a 7-segment decoder driver incorporating input latches and constant current output circuits

More information

MICROLITHIC DOUBLE-BALANCED MIXER

MICROLITHIC DOUBLE-BALANCED MIXER ML1-15 The ML1-15 is a Microlithic double balanced mixer. As with all Microlithic mixers (patent pending), it features excellent conversion loss, isolations, and spurious performance across a broad bandwidth

More information

EVLHVLED815W10A. 10 W wide range non-isolated high power factor LED driver using HVLED815PF. Description. Features

EVLHVLED815W10A. 10 W wide range non-isolated high power factor LED driver using HVLED815PF. Description. Features 10 W wide range non-isolated high power factor LED driver using HVLED815PF Description Data brief Features 10 W LED driver Single stage HPF buck-boost Primary side regulation - no optocoupler Power factor

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60921 Edition 2.1 2006-06 Edition 2:2004 consolidated with amendment 1:2006 Ballasts for tubular fluorescent lamps Performance requirements IEC 2006 Copyright - all rights reserved

More information

MICROLITHIC DOUBLE-BALANCED MIXER

MICROLITHIC DOUBLE-BALANCED MIXER ML15 The ML15 is a Microlithic double balanced mixer. As with all Microlithic mixers (patent pending), it features excellent conversion loss, isolations, and spurious performance across a broad bandwidth

More information

GaAs MMIC Double Balanced Mixer

GaAs MMIC Double Balanced Mixer Page 1 The is a passive GaAs double balanced MMIC mixer suitable for both up and down-conversion applications. As with all Marki Microwave mixers, it features excellent conversion loss, isolation and spurious

More information

ENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD ANSI/SCTE

ENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD ANSI/SCTE ENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD ANSI/SCTE 176 2011 Specification for 75 ohm 'MCX' Connector, Male & Female Interface NOTICE The Society of Cable Telecommunications

More information

American National Standard

American National Standard American National Standard Approved: 08/15/2014 Secretariat: National Electrical Manufacturers Association for Lighting Equipment Harmonic Emission Limits Related Power Quality Requirements ANSI C82.77-10-2014

More information