ARCHITECT & ENGINEER SPECIFICATIONS. SECTION Digital Video Servers and Analog Recording Devices

Transcription

1 (Project No.) (Date) (Project Name) (Project Location) PART 2 PRODUCTS ARCHITECT & ENGINEER SPECIFICATIONS SECTION Digital Video Servers and Analog Recording Devices Sony NSR-1000 Series Network Surveillance Servers (NSR-1200, NSR-1100 and NSR-1050H) 2.01 NETWORK VIDEO SERVER SPECIFICATIONS A. GENERAL REQUIREMENTS: 1. The NSR-1000 Series network surveillance server (called server as described below) shall be a Linux-based server, capable of simultaneously recording multiple streams in any combination of JPEG/ MPEG-4/H.264 including multiple instances of the same codec from a camera/encoder depending on the camera capabilities. The server shall support G.711, G.723 and G.726 audio. The server shall be capable of decoding and displaying in multi-screen or single screen the decoded streams, and have I/O terminal interfaces to accept alarm triggers. 2. a) The NSR-1200 server shall be capable of registering up to sixty four (64) cameras. When monitoring cameras with Full-HD or 1.3 megapixel resolution, the recommended number of cameras is up to sixteen (16). b) NSR-1100 shall be capable of registering up to thirty two (32) cameras. When monitoring cameras with Full-HD or 1.3 megapixel resolution, the recommended number of cameras is up to sixteen (16). c) NSR-1050H shall support up to twenty (20) cameras. When monitoring cameras with Full-HD or 1.3 megapixel resolution, the recommended number of cameras is up to sixteen (16). 3. a) The NSR-1050H shall be equipped with an NSBK-A16 analog encoder board and DVI-BNC cable to accept analog camera signals. Up to sixteen (16) analog cameras and four (4) audio channels shall be supported via these equipments. Analog video and audio interface shall be via a pigtail cable with female BNC connectors for video, and RCA connectors for audio. Maximum number of cameras supported shall include the total of both analog and IP cameras connected to the NSR.

2 b) An optional plug in card that is field installable to support sixteen (16) analog cameras shall be available for the NSR-1200 and NSR Additionally, up to four (4) audio channels shall be supported by this plug in option. Model number shall be the NSBK-A16. Analog video and audio interface shall be via a pigtail cable with female BNC connectors for video, and RCA connectors for audio. Maximum number of cameras supported shall include the total of both analog and IP cameras connected to the NSR. 4. The server shall support all devices listed in section J. SUPPORTED DEVICES of this document. 5. The server shall have built-in RS-232C and RS-422/485 ports and shall support the Sony VISCA protocol on the RS-232C or RS-422, and Pelco D protocol on the RS-422/485 port 6. The server shall have the ability to display, record, and playback video from cameras located at multiple remote locations over an IP network. 7. The server shall support the following recording modes: manual, schedule based, alarm, and event (or activity). Additionally, the server shall support rule or filter based triggered recording when used with Sony cameras that support intelligent motion detection or object detection, such as the SNC-CH/DH Series, SNC-RH/RS Series, SNT- EX/EP Series, SNC-DM160, SNC-DM110, SNC-DS60, SNC-DS10, SNC-CM120, SNC-CS20, SNC-CS50, SNC-DF50, SNC-DF80, SNC- DF85, SNC-RX Series and SNC-RZ The server shall have an Auto Logon function, which allows users to log on automatically. The Auto Logon function is activated through the Administration Menu. 9. The server shall have a Camera Auto Registration function. This function shall allow the user to automatically set the following: a) Detect all Sony IP cameras or Sony video servers (encoders) installed on the same network segment automatically. b) Detect camera type. c) Assign IP address to cameras. d) Register the cameras to the server. e) Generate appropriate monitoring layout based on number of registered cameras

3 10. The server shall also have a quick recording configuration capability with a simple wizard. The function shall help automatically set the following: a) Allow the user to select either schedule recording or motion based alarm recording. b) If schedule recording is selected, user inputs the total number of days to store recorded video (up to 365 days), and the server shall automatically begin recording video with the appropriate frame rate. c) Frame rate shall be calculated based on available storage, number of cameras, 24/7 recording, VGA resolution on IP cameras/encoders, 2CIF resolution on analog cameras via the NSBK-A16, MPEG-4 compression, at 50% picture quality. d) If alarm recording is selected, the server shall automatically begin recording video using the most appropriate parameters for alarm recording. When using the automatic alarm wizard, the maximum number of cameras that can be automatically configured shall be as follows: NSR-1200 twenty four (24) cameras, NSR-1100 twelve (12) cameras, and NSR-1000 twelve (12) cameras. e) Parameters settings shall be based on VGA resolution on IP cameras/encoders, 2CIF resolution on analog cameras via the NSBK-A16, MPEG-4 compression, and 10 fps at 80% picture quality. f) Alarms shall be based on VMD (camera) as default and if the camera does not have motion detection capability, then VMD (recorder) shall be used. 11. Parameters that were set with the wizard shall be capable of being changed manually. 12. An operator with proper rights shall be able to manually record video by clicking the REC button on the GUI or configure record settings manually without using the wizard. 13. Pre- and post-alarm duration shall be configurable for all event or alarm based recording. 14. The server shall be capable of simultaneous local and remote viewing, playing back, recording and exporting video

4 15. The server shall support simultaneous video and audio export. Video files shall be in Sony CAM file format and audio shall be in Sony AUD file format. The Media File Player application can be exported with the video and audio files so that video/audio can be played back from a Windows PC without installing any application software. The Media File Player application shall also allow exporting files to AVI format. 16. The server shall have the capability of using any of the following as a trigger to perform a given action: a) Sensor Input trigger to the camera, or the server b) Camera-based Video Motion Detection (VMD) trigger c) Recorder-based VMD d) Video Motion Filters (VMF): Appearance, Disappearance, Existing, Capacity, Passing, and Unattended/Removed. VMF shall work in conjunction with the camera s motion and object detection capabilities. e) System Alerts f) Barix Barionet, 3 rd Party I/O Box g) Logical Sensor Input (Requires HTTP API available upon request) h) Camera tampering alert from Sony cameras Using any of the above triggers or manually via the GUI, the following actions shall be capable of being initiated: a) Camera Action Preset - Change camera's preset position Tour - Start camera's tour Output - Change camera's output state b) I/O Device Action Sensor Output (Server) Output - Change logical output state of Barix Barionet c) System Action - Send an with/without an image to a registered SMTP client address Change Layout - Change layout on a sever Beep - Sound a Beep on a server d) Client Action Change Layout - Change layout on a client Beep - Sound a Beep on a client e) Alarm Notification The server shall have the capability to schedule any of the actions above. 17. The server shall be capable of recording and storing images at frame rates between 1 to 30 frames per second on a per camera basis

5 18. The server shall have three types of searches on the main GUI: a) Date/Time This can be performed on a selected camera or all monitored cameras. b) Quick Playback Playback start point is user configurable with the default setting being 10 seconds. c) Alarm history A list of alarm events is displayed at the bottom of the GUI. When an alarm event is double-clicked, it is played back in the active window. 19. The playback control pane shall be active when any of the following search methods, date/time, quick playback, alarm history based, is selected to allow the operator to fast-forward, rewind, pause, use a slider to scroll through the clip, or jump to the next or previous alarm. 20. The server shall also have a detailed search capability providing the operator with a Search GUI that allows two separate types of searches, Normal and Object: a) Normal search allows multiple cameras to be searched simultaneously. Search images of up to nine cameras can be displayed in the playback pane. b) Object search allows only a single camera to be searched and the searched images are displayed in the playback pane. 21. The server shall support simultaneous search and playback of up to nine (9) cameras for normal search operations. For Normal searches the server shall allow the operator to enter a date/time range, select multiple cameras, and select any combination of the recording type (Schedule, Manual, Alarm, and/or Event). The search results will be displayed in the pane at the bottom of the GUI in a timeline. The timeline view can be changed to a list view. Cameras that are on the timeline or events that are listed in the list view can be selected and the images associated with the search results shall be displayed in the playback pane. 22. For Normal searches the server shall provide playback controls of the searched video by using the playback control pane. When using the timeline, the vertical bar representing the displayed image can be dragged to the left or right to scroll through the video. 23. For Object searches (or Post Motion Detection searches), the server shall allow the operator to enter a date/time range, select a single camera, and select a type of Post VMF or Post VMD search. 24. To export video, the server shall allow the operator to select an IN and OUT point on the timeline. Exporting video from multiple cameras within the selected range shall also be possible. The server shall also provide the ability to export multiple events from the list view

6 25. The server shall have an e-flip function, which can be used to rotate an upside-down image so that it is displayed in the proper orientation. 26. The server shall support Pan/Tilt/Zoom (PTZ) controls over TCP/IP. 27. The server shall allow the operator to directly control Pan/Tilt/Zoom (PTZ) via control pane, or using a mouse on the displayed live image. The server shall support Sony system controller RM-NS1000 (optional) and also 3 rd party joystick from CH Products for variable Pan/Tilt/Zoom (PTZ) control. 28. The server shall allow the operator to register Pan/Tilt/Zoom (PTZ) camera/encoder presets and the ability to recall such presets. Presets shall be stored on the camera/encoder. The server shall support the maximum number of presets that the camera/encoder allows. 29. The server shall have the capability to provide camera tours on a demand basis from the main GUI or by using an alarm trigger. 30. The server shall support shadow tours on the SNC-RH/RS Series. Shadow tour learns an operator's Pan/Tilt/Zoom (PTZ) control actions (including those made with a joystick) and then repeats the motions through the main GUI or RM-NS The server shall have a capability to create multi-camera viewing layouts by defining number of rows and columns. 32. The server shall support the import and export of site layout images and/or icons in BITMAP and JPEG file formats. 33. The server mapping layouts shall be capable of being freely configured. This function shall allow customizations and modifications to layouts to incorporate added icons or links. 34. The server shall support multi-level layout mapping in the GUI, with each layout capable of linking an icon or action button to another layout or camera image, or to a specific monitor window. 35. The server shall have an ability to perform a layout tour, which means it can switch user-prespecified layouts sequentially

7 36. The server shall have a custom user setting, which allows the administrator to define any combination of permissions and assign that level of access to specific users. The permissions shall be as follows: <Level 5 Administrator> a) User Configuration b) Administrator Menu Setting <Level 4 System Configuration> c) Schedule Configuration d) Device Configuration e) Sever Configuration f) Layout Configuration g) GUI Configuration h) Manual Action Configuration <Level 3 Recording File manipulation> i) Manual Deletion / Protection j) Log control k) Export Control l) Exit Server Lv.5 <Level 2 Basic Operation> m) Search & Playback n) Camera Control o) Output control p) Layout Control q) Manual Record r) Manual Action s) Capture Control t) Display Control u) Alarm History Control Lv.2 Lv.3 Lv.4 <Level 1 Monitoring Only> v) Exit Application Lv The server shall have five pre-assigned user levels as follows: Level 1: Monitoring Only. Level 2: Basic Operation Level 3: Recording File Manipulation Level 4: System Configuration Level 5: Administrator 38. The server shall be configurable for centralized server management in a master/slave configuration

8 39. The server shall be RAID 0, RAID 1+0 and RAID 5 capable on NSR to help prevent data loss in case of HDD failures and HDDs shall be hot swappable. The NSR-1100 shall be RAID 0 and RAID 1 capable. 40. The server shall support 3 rd party iscsi (Internet Small Computer System Interface) storages via the channel-bonded network ports 3 and 4 of the NSR. 41. The server shall support expanded storage with the NSRE-S200 SAS (Serial Attached SCSI) Expansion Storage Units. The NSRE-S200 shall be RAID 5 capable to help prevent data loss in case of HDD failures and HDDs shall be hot swappable. 42. The NSRE-S200 shall be connected to the server using the mini-sas cable supplied with the unit. Up to seven (7) NSRE-S200 units can be connected to a single server in a cascaded manner. Data transfer rate shall be up to 3 Gbps. 43. The NSRE-S200 shall have a storage capacity of approximately 2,793 GB. When seven (7) NSRE-S200 units are connected, the approximate storage capacity is 20 TB. 44. The server shall support Uninterrupted Power Supply (UPS) controlled via RS-232C. 45. The server shall be capable of locking the monitoring window. 46. The server shall support multiple languages as follows: a) English b) Japanese c) French d) German e) Italian f) Spanish g) Simplified Chinese h) Traditional Chinese i) Russian j) Korean k) Polish l) Portuguese (Brazil)

9 47. The server shall have VMD (recorder) capabilities with all the functions as described below. The operator/administrator shall have the ability to set any of the following functions, on a per camera basis. a) Pre- and post-alarm recording: start recording images up to 60 seconds before a motion is detected in the camera s field of view and continue recording for up to 3600 seconds after the motion has stopped in the camera s field of view. b) Motion Detection Threshold: adjusts motion sensitivity level in 1% increments from 0% - 100%. c) Automatically change record frame rate to a predefined value when motion or alarm is detected. 48. The server shall incorporate Sony s Distributed Enhanced Processing Architecture (DEPA), in which a series of Sony IP cameras send preprocessed video related metadata. 49. The server shall support both the Intelligent Motion Detection (IMD) and intelligent Object Detection (IOD) functions of the camera. The IMD function shall be capable of triggering an alarm by using an advanced Sony algorithm, which shall minimize false alarms caused by noise and repetitive motion patterns. The IOD function shall be capable of detecting an object which has been taken away or left behind. These functions shall be mutually exclusive for each camera. 50. The server shall have the following six (6) Video Motion Filters (VMF): a) Appearance filter: detects objects that match the detection criteria for objects entering into a user defined area. b) Disappearance filter: detects objects that match the detection criteria for objects exiting a predefined area. c) Existing filter (Loitering filter): detects an object that stays within a defined area longer than the set limit. d) Capacity filter: triggers an alert when the number of detected objects meets or exceeds the detection criteria for object number within the configured area. e) Passing filter or virtual borders: detects objects crossing the set virtual borderline, going in either direction or a specified direction. f) Unattended/Removed: detects objects that are left unattended or removed by comparing the retained background video data and live video data

10 51. All DEPA functions shall be available with the following Sony IP cameras: SNC-RX530, SNC-RX550, SNC-RX570, SNC-RZ50, SNC- CS50, SNC-DF50, SNF-DF80, SNC-DF85, SNC-CM120, SNC-DM110, SNC-DM160, SNC-DS10, SNC-DS60 and SNC-CS DEPA functions except the unattended/removed filter of VMFs shall be available with the following cameras/encoder: SNC-CH/DH Series, SNC-RH/RS Series and SNT-EX Series. 53. The server shall receive and store the metadata for intelligent post video motion filter search and intelligent live video motion filter alarm. 54. The server shall be capable of applying up to three filters in parallel such that violation on any one filter shall cause an alarm. 55. The server shall be capable of applying up to three filters on a scene in a sequence or cascade fashion, whereby an alarm will only be triggered based upon events that violate the rules or filters one at a time, in a predefined order. 56. The server shall be capable of setting the minimum and maximum object size for detection. 57. The server shall be capable of setting the minimum object speed or the maximum object speed for detection. 58. The server shall have the ability to apply temporary filters to recorded images that have been recorded in conjunction with metadata, to limit searches to stored video based on these parameters. 59. The server shall be capable of saving configuration data of cameras, I/O boxes and audio for backup. 60. The server shall be capable of restoring configuration data of cameras, I/O boxes and audio using the saved configuration data. 61. The server shall be capable of storing log files of user login, alarm event, and other system errors. 62. The server shall support data overwriting and clean-up function to keep enough capacity for recording. 63. The server shall have an API for integration with 3 rd party software applications

11 64. The server shall support camera tampering detection on Sony cameras equipped with this function. This function alerts the operator if the camera has been tampered with. Tampering can include spraying the camera lens, covering it with a cloth, or changing the mounting direction. 65. The server shall have an Icon Highlight function, which allows operators to assign alarms, such as VMD, VMF, sensor inputs, and Tampering alarms, to an icon so that the frame surrounding the icon blinks in red on alarm. The icon shall stop blinking either when clicked or when the alarm ends, depending on user settings. B. VIDEO REQUIREMENTS: 1. The server shall support video streams that are encoded in H.264, MPEG-4 and JPEG. 2. Recorded image streams in H.264, JPEG and MPEG-4 shall be in Sony s CAM file format. 3. The maximum recording frame rate at VGA (640 x 480) in MPEG-4 (1Mbps) shall be 1200 fps (frames per second) for the NSR-1200, 960 fps for the NSR-1100 and 600 fps for the NSR-1050H. The maximum recording frame rate at Full-HD (1920 x 1080) in H.264 (4Mbps) shall be 700 fps for the NSR-1200, 420 fps for the NSR-1100 and 320 fps for the NSR-1050H. MPEG-4 (1Mbps) VGA ( 640 x 480) H.264 (4Mbps) Full HD (1920 x 1080) NSR NSR NSR-1050H Note: Above figures are based on no fragmentation of the HDD 4. The internal hard disk drive capabilities: a) The NSR-1200 shall have internal hard drive storage capacity of 4TB. b) The NSR-1100 shall have internal hard drive (HDD) storage capacity of 2TB. c) The NSR-1050H shall have an internal drive (HDD) storage capacity of 1TB

12 5. The server shall be capable of accepting multiple video streams from IP camera simultaneously using TCP/IP protocol. 6. The server shall be capable of up to x25 digital zoom when playing back recorded video. 7. The server shall allow hotspots to be set in both a default layout and a custom layout of the main monitor or the 2nd monitor. 8. The server shall be capable of supporting cameras that have the Light Funnel function. The server shall be capable of manually setting Light Funnel to Always ON or Always OFF. The server shall also be capable of setting Light Funnel to Auto (activation based on environmental lighting conditions) or to sync it with the camera s Day/Night function. The server shall be capable of recording, and displaying camera streams when resolution dynamically changes as a result of the Light Funnel function turning on or off. The maximum resolution when the Light Funnel function is ON shall be 640 x The server shall support the following functions on cameras equipped with these functions: View-DR (Visibility Enhanced Wide Dynamic Range) produces images with very wide dynamic ranges, XDNR (Excellent Dynamic Noise Reduction) reduces AGC noise in order to provide clear images without motion blur and Visibility Enhancer (VE) - optimizes the brightness and color reproduction of an image dynamically on a pixel-by-pixel basis to provide better visibility in poor backlight conditions. 10. Each monitor window shall be capable of indicating, but not necessarily be limited to, the following items: a) Camera name b) Status (recording type, playback status and speed) c) Time (current date and time of live images or the recording date and time of play back images) d) Display Image per Second e) Bandwidth used for transferring images via network connection f) Frame Rate g) VMD (recorder) object frames ON/OFF

13 h) Video Motion Filter (VMF) windows or objects detected for cameras that support this function. Object Frame Alarm Object Frame Filter Frame Inactive Area Frame Object ID Object Duration Filtered Count 11. The server shall provide a sequence mode for displaying multiple monitor layouts in sequence during a specified time period, which shall allow for monitoring a number of cameras in desired sequences and layout patterns. 12. The server shall have the ability to independently set record rates for each camera, not to exceed the total frame rate described above. 13. The server shall have default layouts such as 2 x 2, 3 x 3, 4 x 4 and pre-customized layouts. 14. The server shall be capable of displaying live images and playing back images in any monitor window of a selected monitoring layout. Playback of any camera in a particular window in a multi-camera display configuration shall not stop live viewing of cameras in the other windows. 15. The server shall be equipped with four (4) video interfaces (2 RGB and 2 HDMI) for monitors. Two (2) video outputs can be used simultaneously in any of the following combinations, 2 RGBs, 2 HDMIs, or 1 RGB and 1 HDMI. Monitor 1 shall be the main monitor. Monitor 2 shall be capable of showing the same view as the Monitor 1 output, or used as a hotspot monitor. On the 2 nd monitor, selected images or images from cameras triggered via sensor input or motion detection shall be displayed sequentially in the monitor. 16. The server shall be capable of taking a still image snapshot in JPEG format. 17. The server shall have a masking capability, which masks sensitive areas from both live display and recording. User shall have the option of changing the shape and type of masking such as, Gaussian blur, Mosaic (average), Random Noise or solid colors at a minimum. 18. The server shall have pre-alarm and post-alarm recordings upon detection of events such as sensor input, VMD and VMF. Pre- and post-alarm durations shall be user configurable

14 19. The server shall be capable of exporting recorded CAM files, AUD files, JPEG still images, configuration data and log files to the following media: CD-R, CD-RW, DVD+R, DVD-R and USB memory. 20. The server shall be capable of restoring configuration data, importing BMP and JPEG images for site layouts and icons, from the following media: CD-R, CD-RW, DVD+R, DVD-R and USB memory. 21. The server shall support simultaneous video and audio export. Video files shall be in Sony CAM file format and audio shall be in Sony AUD file format. The Media File Player application can be exported with the video and audio files so that video/audio can be played back from a PC without installing any application software. AVI files can be exported from the Media File Player application. C. AUDIO REQUIREMENTS: 1. The server shall be capable of audio monitoring, recording and play back with G.711/G.723/G.726 compression. Users can enable or disable the audio recording function. 2. The server shall support the same number of audio channel inputs as the number of licensed cameras. 3. The server shall be capable of exporting both audio and video. Synchronization shall be best effort. D. NETWORK REQUIREMENTS: 1. The server shall have four (4) Gigabit-Ethernet ports. Port 1 shall be used to interface with cameras, port 2 shall be used to interface with client systems or other servers, and ports 3 and 4 shall be channel bonded and are connected to 3 rd party iscsi storage. 2. The server shall provide video surveillance over TCP/IP. 3. The server shall support FTP server function. 4. The server shall have both NTP server as well as NTP client functionalities. 5. The server shall support SNMP ver.2 (MIB-2 system) protocols. Available traps shall be for notification of the following: shutdown, temperature, voltage, fan, UPS, power, HDD, RAID, File System, Network, Resource Usage and SAS events

15 6. The server shall provide alarm relay output when the server finds any video loss caused by the network interruption. The alarm relay shall be electrically isolated from the server. E. SYSTEM REQUIREMENTS: 1. The server shall require the following user provided hardware for system setup and operation: a) Sony network cameras, 3rd party supported network cameras and/or analog cameras b) Monitor c) USB keyboard d) USB mouse e) RM-NS1000 USB system controller or CH products USB joystick (optional) f) Network switch g) 1000Base-T/100Base-TX/10Base-T cable(s) h) USB memory device (required for backing up system information such as logs). 2. The server shall provide the following selection of monitor as generic monitor type: a) Generic LCD Display; LCD Panel 1024 x 768; Hz b) Generic LCD Display; LCD Panel 1280 x 1024; Hz c) Generic LCD Display; LCD Panel 1360 x 768; 60 Hz d) Generic LCD Display; LCD Panel 1600 x 1200; 60 Hz e) Generic LCD Display; LCD Panel 1920 x 1080; 60 Hz f) Generic LCD Display; LCD Panel 1920 x 1200; 60 Hz g) Generic CRT Display; Monitor 1024 x 768; Hz h) Generic CRT Display; Monitor 1280 x 1024; Hz i) Generic CRT Display; Monitor 1600 x 1200; Hz 3. The server shall be capable of specifying the following display resolutions: HDMI/RGB output: a) Full High-Definition (1920x1080) b) WUXGA (1920x1200) c) UXGA (1600x1200) d) Full Wide XGA (1360x768) e) SXGA (1280x1024) f) XGA (1024x768)

16 4. The server shall be capable of backing up system information as logs on USB memory. The server shall require a device that supports general USB Mass Storage Class specifications. 5. The server shall support the RM-NS1000 system controller via a USB2.0 interface. The RM-NS1000 shall have dedicated buttons for actions, function keys, a numeric keypad, a Jog/Shuttle dial, a 3-axis joystick and a multi function menu displayed on its LCD. The LCD shall indicate the current operational status. The RM-NS1000 shall support bi-directional audio. The interfaces shall be a headphone jack for inbound audio, and a built-in microphone or a plug-in-power MIC input jack for outbound audio (via RSM Ad Client only) The RM-NS1000 shall allow operators to perform a variety of operations such as: a) Selecting a layout b) Selecting a monitor frame c) Assigning a camera to the selected monitor frame d) Switching between Live Monitoring/Playback e) Camera control (Pan/Tilt/Zoom, adjusting iris and focus) f) Assigning and recalling camera presets g) Registering camera Shadow Tour movements h) Start and stop camera guard tour and Shadow Tour i) Start and stop Layout Tour j) Capturing still images (JPEG) k) Start/stop manual recording l) Searching for and playing back recorded images (except Object Search ) m) Playback control (pausing/frame-by-frame forwarding/rewinding) by Jog/Shuttle dial n) Exporting recorded images o) Locking the system controller operation (password/timeout) p) Monitor inbound audio with optional headphones q) Use the built-in microphone or optional external microphone for outbound audio (via RSM Ad Client only) r) Mouse operation using the joystick (mouse emulation): Pan/Tilt/Zoom, returning all cameras to Preset position

17 6. The server shall also support the CH Products IP Desktop USB joystick via a USB2.0 interface. The CH Products IP Desktop USB joystick allows users simple operation using a joystick and dedicated buttons for actions such as preset and Pan/Tilt/Zoom (PTZ). 7. The integrator shall clarify system requirements to ensure proper installation and operation of the software with the manufacture or its representatives. F. MECHANICAL REQUIREMENTS: 1. The server shall provide the capabilities to indicate the operational status by LEDs such as power, network, HDD, errors and recording status. 2. The server shall have a DVD/CD drive to write data from the hard disks to disc media. 3. The server shall be capable of exporting recorded images to USB memory or disc media. 4. The server shall have the capability of being configured with an uninterruptible power supply (UPS) through RS-232C serial connection. A cable shall not be supplied by the manufacturer. 5. The server shall provide the connection to up to eight (8) channel sensor inputs from external sensors that are electrically isolated from the unit. 6. The server shall provide up to eight (8) channel alarm outputs through the dedicated alarm output connector, that are electrically isolated from the unit. 7. The server shall require a mechanical key lock to physically access the HDD. 8. The server shall be capable of being mounted to standard 19 racks via optional rack mount kit (NSR-RM1)

18 G. REMOTE CLIENT REQUIREMENTS: 1. The server shall include support for Remote Configuration and Management Software (IMZ-NS100 Series client software, called client software as described below) to allow a user to remotely configure the unit, view live images, play back and search the desired recorded images via a local area network, or via the Internet using NAT (Network Address Translation) technology. 2. The client software shall be capable of following items: a) Live video monitoring from selected cameras. b) Camera control (Pan/Tilt/Zoom, adjusting iris and focus) from the main GUI c) Recording configuration (manual/schedule/alarm/event-based) d) Playing back recorded images e) Search by Time and Date, Camera, REC Type (Schedule, Manual, Alarm, Event), Video Motion Filter (VMF) using DEPA technology and post Video Motion Detection (VMD) f) Search by alarm type g) Assigning and recalling camera presets h) Registering camera guard tour and Shadow Tour movements i) Start and stop camera guard tour and Shadow Tour j) Layout tour (monitor sequence mode) k) Monitor frame sequence: up to sixteen (16) camera images can be displayed sequentially in individual monitor frames at a userspecified interval within the range from 3 sec to 60 sec. l) Bi-directional audio support m) Flexible customizable layout and mapping editor up to a hundred (100) layouts. Images and monitor frames in the custom layout can be duplicated using the Copy button. n) Setting hotspots in a custom layout of the main monitor or the 2 nd monitor o) 2 nd monitor configuration -2 nd monitor is used for either hotspot monitoring or live monitoring. The following layouts are available: 1 x 1, 2 x 2, 3 x 3 and 4 x 4. p) Setting a number of triggers to perform actions including, triggering alarms, layout changes, camera tours and notifications q) Privacy masking r) E-flip function s) Icon highlighting t) Defining and providing system user profiles and user permissions for use of specified functions. u) Displaying an alarm log v) Video/Audio export w) Setting camera Global Camera ID in multi-server systems. x) Set Camera tampering detection on cameras equipped with this function

19 y) Auto logon z) Support the RM-NS1000 system controller H. REGULATORY REQUIREMENTS: Safety/EMC - NSR-1000 Series Area Compliance / Standard Japan IEC J VCCI Class A JIS C JATE Japan Telecom law USA UL FCC Class A Digital Device Canada c-ul No IC Class A Digital Device Europe CE(LVD) EN / EN50371 CE(EMC)EN55022 Class A + EN CE(EMC) EN55022 Class A + EN55024 Australia EMC AS/NZS CISPR22(EN55022) EMC Class A China CCCGB8898(IEC60065)+GB13837(CISPR13) CCC GB (IEC ) Korea EMC Russia GOST-R IEC60950 Common IEC Safety/EMC - NSRE-S200 Area Compliance / Standard Japan VCCI Class A JIS C JATE Japan Telecom law USA UL FCC Class A Digital Device Canada c-ul No IC Class A Digital Device Europe CE(LVD) EN / EN50371 CE(EMC)EN55022 Class A + EN CE(EMC) EN55022 Class A + EN55024 Australia EMC AS/NZS CISPR22(EN55022) EMC Class A Korea EMC Russia GOST-R IEC60950 Common IEC

20 Safety/EMC - NSBK-A16 Area Compliance / Standard Japan VCCI Class A USA FCC Class A Digital Device Canada IC Class A Digital Device Europe CE(EMC)EN55022 Class A + EN CE(EMC) EN55022 Class A + EN55024 Australia EMC AS/NZS CISPR22(EN55022) EMC Class A I. SUPPLIED ACCESSORIES: NSR-1200/1100: 1. Front panel key 2. Installation Manual 3. First Step Guide 4. Monitoring Window Operation Guide 5. Safety regulations 6. WEEE booklet 7. Warranty booklet 8. Rubber feet NSR-1050H: 1. Front panel key 2. Analog camera input cable 3. Installation Manual 4. First Step Guide 5. Monitoring Window Operation Guide 6. Safety regulations 7. WEEE booklet 8. Warranty booklet 9. Rubber feet

21 J. SUPPORTED DEVICES: 1. Sony: a) Video Encoders: SNT-EX101E, SNT-EX101, SNT-EX104, SNT- EP104, SNT-EX154, SNT-EP154, SNT-V704 b) 5 th Generation: SNC-RH124, SNC-RH164, SNC-RS44, SNC-RS46, SNC-RS84, SNC-RS86, SNC-CH120, SNC-CH140, SNC-CH160, SNC-CH180, SNC-CH260, SNC-CH280, SNC-CH210, SNC-CH220, SNC-CH240, SNC-DH120, SNC-DH120T, SNC-DH140, SNC- DH140T, SNC-DH160, SNC-DH180, SNC-DH220, SNC-DH220T, SNC-DH240, SNC-DH240T, SNC-DH260, SNC-DH280. c) 4 th Generation: SNC-CM120, SNC-CS20, SNC-DM110, SNC- DM160, SNC-DS10, SNC-DS60 d) 3 rd Generation: SNC-CS50, SNC-DF85, SNC-DF80, SNC-DF50, SNC-RX570, SNC-RX550, SNC-RX530, SNC-RZ50 e) 2 nd Generation: SNC-CS10, SNC-CS11, SNC-DF40, SNC-DF70, SNC-P1, SNC-P5, SNC-RZ25 f) 1 st Generation: SNC-RZ30, SNC-Z20, SNC-CS3 2. Axis: a) Box Type Cameras: AXIS206, AXIS207, AXIS207W, AXIS210, AXIS210A, AXIS211, AXIS211A, AXIS221 b) Mini Dome Cameras: AXIS209FD, AXIS209FD-R, AXIS209MFD, AXIS209MFD-R, AXIS216FD, AXIS216FD-V, AXIS216MFD, AXIS216MFD-V, AXIS225FD, AXISP3301, AXISP3301-V c) PTZ Cameras: AXIS212PTZ, AXIS213PTZ (with213cm), AXIS214PTZ, AXIS215PTZ d) Speed Dome Cameras: AXIS232D+, AXIS233D e) Video Servers: AXIS241S, AXIS243SA, AXIS247S, AXISQ7401, AXIS241Q, AXIS241QA, AXIS243Q, AXISQ7406 (Blade type) 3. IQinvision: a) Box Type Cameras: IQ755, IQ753, IQ752, IQ711, IQ705, IQ703, IQ702, IQ511, IQ

22 4. Barix: a) I/O: Barionet K. SPECIFICATIONS: Memory Onboard flash memory: 4 GB Internal memory NSR-1200: 2 GB NSR-1100: 1 GB NSR-1050H: 1GB Recording devices Internal hard disk drive NSR-1200: 4 TB (SATA-II 1TB x 4) NSR-1100: 2 TB (SATA-II 1TB x 2) NSR-1050H: 1TB (SATA-II 1TB x 1) Capacities for hard disk drives are based on the following equation for 1 GB: 1,000 x 1,000 x 1,000 = 1 billion bytes DVD/CD drive (front) 1 drive Compatible media: DVD+R, DVD-R, DVD-ROM, CD-R, CD-RW, CD- ROM External connectors Front Monitor output: Analog RGB (mini D-SUB 15 pin) (1) USB: USB 2.0 (3) Rear Monitor output: Analog RGB (mini D-SUB 15 pin) (2) HDMI (2) Audio output (L) (1) Audio output (R) (1) Audio input (1) LAN (1000 Base-T/100Base-TX/10Base-T) (RJ-45) (4) USB: USB 2.0 (3) Mini-SAS output (for optional NSRE-S200 connection, Mini-SAS x 4 (SFF-8088), 3.0 Gbit/s) (1) Sensor input (compatible with 3.3 V to 24 V DC devices, Photo coupler input, insulated from main unit) (8) Alarm output (maximum 24 V DC, 1 A, mechanical relay output, insulated from main unit) (8) UPS serial: RS-232C (1) Analog camera control (only with NSR-1050H or NSBK-A16 expression): RS-232C (1), RS-422/485 (1)

23 Operating environment Operating temperature 5 C to 40 C (41 F to 104 F) Operating humidity 20% to 80% (maximum wet-bulb temperature: 30 C, non-condensing) Temperature range for storage -20 to +60 C (-4 to +140 F) Humidity for storage 20 to 90% relative humidity (maximum wet-bulb temperature 35 C/95 F, non-condensing) Power and miscellaneous Power 100 to 127 V AC/200 to 240 V AC (50/60 Hz) Power consumption Max 350 W Dimensions 430 x 87 x 417 mm (16.9 x 3.4 x 16.4 in.) (W/H/D, excluding protrusions) Mass NSR-1200: approx kg (29.8 lb.) NSR-1100: approx. 12kg (26.7 lb.) NSR-1050H: approx. 11.5kg (25.4 lb.) Optional accessories NSR-RM1 NSBK-A16 NSBK-A16H NSRE-S200 RM-NS1000 Rack Mounting Kit Analog Encoding Kit (MPEG-4) Analog Encoding Kit (H.264) Expansion Storage Unit System Controller

24 L. DIMENSIONS:

25 M. PIN ASSIGNMENTS: 2010 Sony Corporation. All rights reserved. Features and specifications are subject to change without notice. Non-metric weights and measurements are approximate. Sony is a registered trademark of Sony Corporation. Microsoft, Windows, Windows XP, Windows Vista, Windows 7 and Internet Explorer are trademarks of Microsoft Corporation. Intel, Pentium, and Core are trademarks of Intel Corporation. All other trademarks are the property of their respective owners