Parameter Min. Typ. Max. Units. Frequency Range 5 20 GHz. Minimum Insertion Loss db. Dynamic 5 GHz 23 db
|
|
|
- Roy Poole
- 5 years ago
- Views:
Transcription
1 5-2 GHz GaAs MMIC EWA21ZZ September 29 Rev 3 Features Broadband Performance: 5 to 2 GHz Dynamic Range: 23 db, typical Input IP3: + 21 dbm, typical (any attenuation) Dual Voltage Control: -1.5 to V ESD Protection Bias Circuitry 1% RF and DC tested RoHS Compliant Die Size: 1.5 x 1.5 x.1 mm Description The Endwave EWA21ZZ is a GaAs phemt broadband voltage variable attenuator MMIC. The high linearity voltage variable attenuator provides 23 db dynamic range with +21 dbm input IP3 at any attenuation. This device has integrated ESD protection bias circuitry and can be used for a wide range of applications from defense electronics to commercial communication systems. All die are 1% DC and RF tested and visually inspected to Mil-Std-883 Method 21. Electrical Characteristics (Temperature = +25 C) Device Photo Block Diagram Parameter Min. Typ. Max. Units Frequency Range 5 2 GHz Minimum Insertion Loss db Dynamic 5 GHz 23 db Input Return Loss (over dynamic range) 8 db Output Return Loss (over dynamic range) 8 db Input IP3 (any attenuation) 21 dbm Gain control Voltage 1 (Vctrl 1,2) -1.5 V Note 1: Max attenuation for Vctrl 1, 2 = volts Endwave Corporation 13 Baytech Drive San Jose CA Endwave Page 1 of 5
2 5-2 GHz GaAs MMIC EWA21ZZ 4 GHz - 23 GHz 4 GHz - 23 GHz September 29 Rev V_1.5V 16 GHz - 2 GHz V_1.5V 13 GHz 17 GHz V_1.5V 16 GHz - 2 GHz V_1.5V 13 GHz 17 GHz V_1.5V.9V_1.5V Endwave Corporation 13 Baytech Drive San Jose CA Endwave Page 2 of 5
3 5-2 GHz GaAs MMIC EWA21ZZ GHz 15 GHz V_1.5V 9 GHz 13 GHz V_1.5V 4 GHz 9 GHz V_1.5V 11 GHz 15 GHz V_1.5V 9 GHz 13 GHz V_1.5V 4 GHz 9 GHz September 29 Rev V_1.5V Endwave Corporation 13 Baytech Drive San Jose CA Endwave Page 3 of 5
4 5-2 GHz GaAs MMIC EWA21ZZ September 29 Rev 3 Assembly Drawing Electrostatic Sensitive Device Observe Handling Precautions Outline Drawing To Attenuator Vcntrl1 EWA21ZZ EWA21ZZ To Attenuator Vcntrl2 Electrostatic Sensitive Device Observe Handling Precautions Bond Pad #1 - RF In Bond Pad #2 - RF Out Bond Pad #3 - Vcntrl2 Bond Pad #4 - Vcntrl1 Dimensions in mm [inches]. Die thickness is.4. Bond Pad and backside metallization is gold. Endwave Corporation 13 Baytech Drive San Jose CA Endwave Page 4 of 5
5 5-2 GHz GaAs MMIC EWA21ZZ September 29 Rev 3 RF Input Power (min attenuation) Control Voltage (Vctrl1, 2) Typical Application LO Input GHz Pin = dbm Storage Temperature Operating Temperature IF Inputs DC 3.5 GHz EWU151ZZ Band Pass Filter Absolute Maximum Ratings EWG151ZZ +25 dbm -2.5 to V to +15ºC -4 to +85ºC EWA21ZZ Support Documentation Support documentation including Assembly Notes, Application Notes and Qualification Procedures can be found on our website at. EWP151ZZ RF Output GHz Ordering Information Part Number Description EWA21ZZ RoHS compliant bare die in waffle or gel packs EWA21ZZ-EV EWA21ZZ in a connectorized test fixture Endwave Corporation 13 Baytech Drive San Jose CA Endwave Page 5 of 5
15-32 GHz GaAs MMIC Voltage Variable Attenuator EWA4001YB. Voltage Variable Attenuator - Packaged. Device Photo. Features.
- Packaged EWA41YB February 211 Rev 1 Features Broadband Performance: to 32 GHz Dynamic Range: 2 db @ 23 GHz, typical Input IP3: +21 dbm, typical Dual Voltage Control: -1. to V ESD Protection Bias Circuitry
2-20 GHz Power Limiter
AMT176211 Rev. 1. March 27 2-2 GHz Power Limiter Features Frequency Range : 2-2 GHz db insertion loss 3 dbm power limiting 5-15 dbm limiting range Input Return Loss > 1 db Output Return Loss > 1 db DC
CMD195. DC-20 GHz SPDT Non-reflective Switch. Features. Functional Block Diagram. Description
Features Positive gain slope High isolation Fast switching speed Non-reflective design Small die size Functional Block Diagram B A 3 4 5 2 RFC A B 6 Description The is a broadband nonreflective GaAs MMIC
CMD176P GHz 4-Bit Digital Phase Shifter. Features. Functional Block Diagram. Description
Features Functional Block Diagram Low phase error Low insertion loss 36 phase shift, LSB = 22.5 Single bit positive logic Pb-free RoHs compliant 4x4 QFN package Description The CMD176P4 is a GaAs MMIC
SR1320AD DC TO 20GHZ GAAS SP3T SWITCH
FEATURES: Low Insertion Loss: 1.6dB at 20GHz High Isolation: 42dB at 20GHz Excellent Return Loss 19ns Switching Speed GaAs phemt Technology PACKAGE - BARE DIE, 1.91MM X 2.11MM X 0.10MM 100% RoHS Compliant
CMD GHz Fundamental Mixer
Features Low conversion loss High isolation Wide IF bandwidth Passive double balanced topology Small die size Functional Block Diagram LO RF 1 2 Description The CMD177 is a general purpose double balanced
Parameter Min Typ Max Units Frequency Range, RF
Features Low conversion loss High isolation Ultra wide IF bandwidth Passive double balanced topology Small die size Description The is a general purpose double balanced mixer die with ultra wide IF bandwidth
Features. LO = +13 dbm, IF = 1 GHz Parameter. Units Min. Typ. Max. Frequency Range, RF & LO GHz Frequency Range, IF DC - 8 GHz
v.17 MIXER, 25 - GHz Typical Applications The is ideal for: LMDS Microwave Point-to-Point Radios SATCOM Functional Diagram Features Passive: No DC Bias Required Input IP3: +19 dbm LO/RF Isolation: 2 db
Features. Gain Variation Over Temperature db/ C
v4.3 MODULE,. - 5 GHz Features Typical Applications The Wideband PA is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military & Space Test Instrumentation Fiber Optics Functional Diagram Gain:
Features. = +25 C, Input Drive Level = +15 dbm. Parameter Min. Typ. Max Min. Typ. Max. Units. Frequency Range Input GHz
Typical Applications The is ideal for: Microwave Test Equipment Microwave/mmWave Radios E-Band Radios Military and Space Functional Diagram Features Passive: No DC Bias Required Conversion Loss: 12 dbm
Features. = +25 C, LO = 50 GHz, LO = +12 dbm, USB [1] Parameter Min. Typ. Max. Units. RF Frequency Range GHz. LO Frequency Range GHz
![Features. = +25 C, LO = 50 GHz, LO = +12 dbm, USB [1] Parameter Min. Typ. Max. Units. RF Frequency Range GHz. LO Frequency Range GHz](/thumbs/95/123253929.jpg "Features. = +25 C, LO = 50 GHz, LO = +12 dbm, USB [1] Parameter Min. Typ. Max. Units. RF Frequency Range GHz. LO Frequency Range GHz")
Typical Applications The is ideal for: E-Band Communications Systems Test Equipment & Sensors Military End-Use Automotive Radar Functional Diagram Features Passive: No DC Bias Required Low LO Power: 12
Parameter Input Output Min Typ Max Diode Option (GHz) (GHz) Input drive level (dbm)
MMD3H The MMD3H is a passive double balanced MMIC doubler covering 1 to 3 GHz on the output. It features excellent conversion loss, superior isolations and harmonic suppressions across a broad bandwidth,
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v2.17 HMC55 MIXER, 11-2 GHz Typical
Features OBSOLETE. = +25 C, As an IRM. IF = MHz. Frequency Range, RF GHz. Frequency Range, LO
v.17 Typical Applications The is ideal for: Microwave Radio & VSAT Test Instrumentation Military Radios Radar & ECM Space Functional Diagram Electrical Specifications, T A = +25 C, As an IRM Parameter
MAAP DIEEV1. Ka-Band 4 W Power Amplifier GHz Rev. V1. Features. Functional Diagram. Description. Pin Configuration 2
Features Frequency Range: 32 to Small Signal Gain: 18 db Saturated Power: 37 dbm Power Added Efficiency: 23% % On-Wafer RF and DC Testing % Visual Inspection to MIL-STD-883 Method Bias V D = 6 V, I D =
CMD197C GHz Distributed Driver Amplifier
Features Functional Block Diagram Wide bandwidth High linearity Single positive supply voltage On chip bias choke Pb-free RoHs compliant 4x4 mm SMT package Description The CMD197C4 is a wideband GaAs MMIC
Features. = +25 C, IF = 1GHz, LO = +13 dbm*
v2.312 HMC6 MIXER, 24-4 GHz Typical Applications Features The HMC6 is ideal for: Test Equipment & Sensors Microwave Point-to-Point Radios Point-to-Multi-Point Radios Military & Space Functional Diagram
Features. = +25 C, LO = 36.1 GHz, LO = +15 dbm, LSB [1] Parameter Min. Typ. Max. Min. Typ. Max Min. Typ. Max Units
![Features. = +25 C, LO = 36.1 GHz, LO = +15 dbm, LSB [1] Parameter Min. Typ. Max. Min. Typ. Max Min. Typ. Max Units](/thumbs/76/73838485.jpg "Features. = +25 C, LO = 36.1 GHz, LO = +15 dbm, LSB [1] Parameter Min. Typ. Max. Min. Typ. Max Min. Typ. Max Units")
v1.314 HMC116 Typical Applications The HMC116 is ideal for: Microwave Point-to-Point Radios VSAT & SATCOM Test Equipment & Sensors Military End-Use Automotive Radar Functional Diagram Features Passive:
GaAs MMIC Triple Balanced Mixer
Page 1 The is a passive MMIC triple balanced mixer. It features a broadband IF port that spans from 2 to 20 GHz, and has excellent spurious suppression. GaAs MMIC technology improves upon the previous
GaAs DOUBLE-BALANCED MIXER
The MM1-312S is a high linearity passive double balanced MMIC mixer. The S diode offers superior 1 db compression, two tone intermodulation performance, and spurious suppression to other GaAs MMIC mixers.
Features. = +25 C, IF= 100 MHz, LO= +13 dbm* Parameter Min. Typ. Max. Min. Typ. Max. Units
Features Passive Double Balanced Topology High LO/RF Isolation: 48 db Low Conversion Loss: 7 db Wide IF Bandwidth: DC - GHz Robust 1,000V esd, Class 1C Typical Applications The is ideal for: Point-to-Point
Features. = +25 C, 50 Ohm System
v1.111 47 Analog Phase Shifter, Typical Applications The is ideal for: EW Receivers Military Radar Test Equipment Satellite Communications Beam Forming Modules Features Wide Bandwidth: 47 Phase Shift Low
= +25 C. Frequency Range, RF & LO GHz. Frequency Range, IF DC - 8 GHz. Conversion Loss db. Noise Figure (SSB)
Typical Applications The is ideal for: LMDS Microwave Point-to-Point Radios SATCOM Features Passive: No DC Bias Required Input IP3: +19 dbm LO/RF Isolation: 42 db Small Size:.47 mm 2 Functional Diagram
HMC814LC3B FREQ. MULTIPLIERS - ACTIVE - SMT. SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, GHz OUTPUT. Features. Typical Applications
Typical Applications The is ideal for: Clock Generation Applications: SONET OC-192 & SDH STM-64 Point-to-Point & VSAT Radios Test Instrumentation Military & Space Sensors Functional Diagram Features High
GaAs DOUBLE-BALANCED MIXER
MM1-124S The MM1-124S is a passive double balanced MMIC mixer. It features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth, in a highly miniaturized form
GaAs DOUBLE-BALANCED MIXER
MM1-3H The MM1-3H is a passive double balanced MMIC mixer. It features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth, in a highly miniaturized form factor.
GaAs MMIC Double Balanced Mixer
Page 1 The is a passive double balanced MMIC mixer. It features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth, in a highly miniaturized form factor. Low
GaAs DOUBLE-BALANCED MIXER
MM1-185H The MM1-185H is a passive double balanced MMIC mixer. It features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth, in a highly miniaturized form
Features. = +25 C, Vdd = +4.5V, +4 dbm Drive Level
Typical Applications The is ideal for: Clock Generation Applications: SONET OC-192 & SDH stm-64 Point-to-Point & VSAT Radios Test Instrumentation Military & Space Sensors Features High Output Power: +21
Parameter Min. Typ. Max. Min. Typ. Max. Units
Typical Applications The is ideal for: Point-to-Point and Point-to-Multi-Point Radio Military Radar, EW & ELINT Satellite Communications Functional Diagram Features Conversion Gain: 11 db Image Rejection:
* Notices. Operating Case Temperature -40 to +85 Storage Temperature -55 to +155 Junction Temperature +126 Operating Voltage.
1.7~2.7GHz High IIP3 GaAs MMIC with Integrated LO AMP Device Features +33.9 dbm Input IP3 8.3dB Conversion Loss Integrated LO Driver -2 to +4dBm LO drive level Available 3.3V to 5V single voltage MSL 1,
Parameter Min. Typ. Max. Min. Typ. Max. Units
v2.89 Typical Applications The is ideal for: Point-to-Point and Point-to-Multi-Point Radio Military Radar, EW & ELINT Satellite Communications Functional Diagram Features Conversion Gain: 8 db Image Rejection:
GaAs MMIC Double Balanced Mixer
Page 1 The is a passive double balanced MMIC mixer. It features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth, in a highly miniaturized form factor. Low
GHz High Dynamic Range Amplifier
Features.2 to 6. GHz Range +41 dbm Output IP3 1.7 db db +23 dbm P1dB LGA Package Single Power Supply Single Input Matching The is a high dynamic range amplifier designed for applications operating within
DC-6.0 GHz 1.0W Packaged HFET
Features 46. dbm OIP3 @.8 GHz 1. db Gain @ 2 GHz.0 db Gain @ 6 GHz 30.0 dbm P1dB SOT-89 Package Functional Block Diagram General Description The X is a high linearity Hetrojunction Field Effect Transistor
CMD179C GHz Fundamental Mixer. Features. Functional Block Diagram. Description
Features Functional Block Diagram Low conversion loss High isolation Wide IF bandwidth Passive double balanced topology Pb-free RoHs compliant 3x3 mm SMT package Description The CMD179C3 is a general purpose
CMD180C GHz Fundamental Mixer. Features. Functional Block Diagram. Description
CMD18C3 2-32 GHz Fundamental Mixer Features Functional Block Diagram Low conversion loss High isolation Wide IF bandwidth Passive double balanced topology Pb-free RoHs compliant 3x3 mm SMT package Description
GaAs MMIC Double Balanced Mixer. Description Package Green Status
GaAs MMIC Double Balanced Mixer MM132HSM 1. Device Overview 1.1 General Description The MM132HSM is a GaAs MMIC double balanced mixer that is optimized for high frequency applications. MM1-832HSM is a
Features. = +25 C, Vdd = +7V, Idd = 820 ma [1]
![Features. = +25 C, Vdd = +7V, Idd = 820 ma [1]](/thumbs/82/87000439.jpg "Features. = +25 C, Vdd = +7V, Idd = 820 ma [1]")
Typical Applications The is ideal for use as a power amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios Test Equipment & Sensors Military End-Use Space Functional Diagram Features Saturated
GaAs MMIC Double Balanced Mixer
Page 1 The is a passive double balanced MMIC mixer. It features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth, in a highly miniaturized form factor. Accurate,
CMD183C GHz I/Q Mixer. Features. Functional Block Diagram. Description
Features Functional Block Diagram Low conversion loss High isolation Image rejection: 26 db Wide IF bandwidth Pb-free RoHs compliant 4x4 mm SMT package Description The CMD183C4 is a compact I/Q mixer in
50~100MHz. 100~210MHz C2 1nF. Operating Case Temperature -40 to +85 Storage Temperature -55 to +155 Junction Temperature +126 Operating Voltage
0.7~1.4GHz High IIP3 GaAs MMIC with Integrated LO AMP Device Features +31.7 dbm Input IP3 8.8dB Conversion Loss Integrated LO Driver -2 to +2dBm LO drive level Available 3.3V to 5V single voltage MSL 1,
TGL2203 Ka-Band 1 W VPIN Limiter
Applications Receive Chain Protection Commercial and Military Radar Product Features Functional Block Diagram Frequency Range: 30-38 GHz Insertion Loss: < 1 db Peak Power Handling: 1 W Flat Leakage: 20
Features. = +25 C, 50 Ohm System
v.211 18 Analog Phase Shifter, 2-2 GHz Typical Applications The is ideal for: EW Receivers Military Radar Test Equipment Satellite Communications Beam Forming Modules Features Wide Bandwidth: 2-2 GHz 18
TGP Bit Digital Phase Shifter
TGP219 Applications X-Band Radar Satellite Communication Systems Product Features Functional Block Diagram Frequency Range: 8 to 12 GHz 6-Bit Digital Phase Shifter Bi-Directional 36 Coverage, LSB = 5.625
Features. Parameter Min. Typ. Max. Min. Typ. Max. Units
v. DOWNCONVERTER, - GHz Typical Applications The is ideal for: Point-to-Point and Point-to-Multi-Point Radios Military Radar, EW & ELINT Satellite Communications Maritime & Mobile Radios Features Conversion
Parameter Min. Typ. Max. Min. Typ. Max. Units
Typical Applications The is ideal for: Point-to-Point and Point-to-Multi-Point Radio Military Radar, EW & ELINT Satellite Communications Functional Diagram Features db Conversion Gain Image Rejection:
HMC576LC3B MULTIPLIERS - ACTIVE - SMT. SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, GHz OUTPUT. Features. Typical Applications
v2.514 Typical Applications The is suitable for: Clock Generation Applications: SONET OC-192 & SDH STM-64 Point-to-Point & VSAT Radios Test Instrumentation Military & Space Functional Diagram Features
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK Typical Applications The is ideal
6 GHz to 26 GHz, GaAs MMIC Fundamental Mixer HMC773A
FEATURES Conversion loss: 9 db typical Local oscillator (LO) to radio frequency (RF) isolation: 37 db typical LO to intermediate frequency (IF) isolation: 37 db typical RF to IF isolation: db typical Input
CMD178C GHz Fundamental Mixer. Features. Functional Block Diagram. Description
Features Functional Block Diagram Low conversion loss High isolation Wide IF bandwidth Passive double balanced topology Pb-free RoHs compliant 3x3 mm SMT package Description The CMD178C3 is a general purpose
Features. = +25 C, Vs = 5V, Vpd = 5V
v1.117 HMC326MS8G / 326MS8GE AMPLIFIER, 3. - 4. GHz Typical Applications The HMC326MS8G / HMC326MS8GE is ideal for: Microwave Radios Broadband Radio Systems Wireless Local Loop Driver Amplifier Functional
Data Sheet. AMMP to 40 GHz GaAs MMIC Sub-Harmonic Mixer In SMT Package. Description. Features. Applications.
AMMP-5 1 to GHz GaAs MMIC Sub-Harmonic Mixer In SMT Package Data Sheet Description Avago s AMMP-5 is an easy-to-use broadband subharmonic mixer, with the injected at half of the frequency of that required
= +25 C, IF= 100 MHz, LO = +17 dbm*
v3.514 Typical Applications Features The is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment & Sensors Military End-Use Functional Diagram Wide IF Bandwidth: DC - 3.5
10 GHz to 26 GHz, GaAs, MMIC, Double Balanced Mixer HMC260ALC3B
Data Sheet FEATURES Passive; no dc bias required Conversion loss 8 db typical for 1 GHz to 18 GHz 9 db typical for 18 GHz to 26 GHz LO to RF isolation: 4 db Input IP3: 19 dbm typical for 18 GHz to 26 GHz
RF V W-CDMA BAND 2 LINEAR PA MODULE
3 V W-CDMA BAND 2 LINEAR PA MODULE Package Style: Module, 10-Pin, 3 mm x 3 mm x 1.0 mm Features HSDPA and HSPA+ Compliant Low Voltage Positive Bias Supply (3.0 V to 4.35 V) +28.5 dbm Linear Output Power
Features OBSOLETE. = +25 C, As a Function of LO Drive. LO = +13 dbm IF = 70 MHz
Typical Applications Functional Diagram The HMC28AMS8 / HMC28AMS8E is ideal for: Base Stations PCMCIA Transceivers Cable Modems Portable Wireless Features Ultra Small Package: MSOP8 Conversion Loss: db
RF2360 LINEAR GENERAL PURPOSE AMPLIFIER
Linear General Purpose Amplifier RF2360 LINEAR GENERAL PURPOSE AMPLIFIER RoHS Compliant & Pb-Free Product Package Style: Standard Batwing Features 5MHz to 1500MHz Operation Internally Matched Input and
CMD255C GHz High IP3 Fundamental Mixer. Features. Functional Block Diagram. Description
Features Functional Block Diagram Low conversion loss High IP3 High isolation Wide IF bandwidth Pb-free RoHs compliant 3x3 mm SMT package Description The CMD255C3 is a general purpose double balanced mixer
Parameter LO RF IF Min Typ Max Diode Option (GHz) (GHz) (GHz) LO drive level (dbm)
MM-726HSM The MM-726HSM is a passive GaAs double balanced MMIC mixer suitable for both up and down-conversion applications. As with all Marki Microwave mixers, it features excellent conversion loss, isolation
Parameter Input Output Min Typ Max Diode Option (GHz) (GHz) Input drive level (dbm)
MMD3HSM The MMD3HSM is a passive double balanced MMIC doubler covering to 3 GHz on the output. It features excellent conversion loss, superior isolations and harmonic suppressions across a broad bandwidth,
GaAs, MMIC Fundamental Mixer, 2.5 GHz to 7.0 GHz HMC557A
FEATURES Conversion loss: db LO to RF isolation: db LO to IF isolation: 3 db Input third-order intercept (IP3): 1 dbm Input second-order intercept (IP2): dbm LO port return loss: dbm RF port return loss:
HMC-C078. SDLVAs. Features. Typical Applications. General Description. Functional Diagram
HMC-C8 v. MODULE w/ LIMITED RF OUTPUT, - GHz Typical Applications The HMC-C8 is ideal for: EW, ELINT & IFM Receivers DF Radar Systems ECM Systems Broadband Test & Measurement Power Measurement & Control
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v1.55 Typical Applications The is
Features. = +25 C, IF= 100 MHz, LO= +15 dbm* Parameter Min. Typ. Max. Min. Typ. Max. Units
v3.514 MIXER, 5.5-14. GHz Typical Applications The is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios Test Equipment & Sensors Military End-Use Functional Diagram Features Passive Double Balanced
CMD257C GHz High IP3 I/Q Mixer. Features. Functional Block Diagram. Description
Features Functional Block Diagram Low conversion loss High IP3 Image rejection: 3 db Wide IF bandwidth Pb-free RoHs compliant 4x4 mm SMT package Description The is a high IP3 I/Q mixer in a leadless surface
Features. = +25 C, IF = 1 GHz, LO = +13 dbm*
v.5 HMC56LM3 SMT MIXER, 24-4 GHz Typical Applications Features The HMC56LM3 is ideal for: Test Equipment & Sensors Point-to-Point Radios Point-to-Multi-Point Radios Military & Space Functional Diagram
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v3.514 MIXER, 5.5-14. GHz Typical
Data Sheet. AMMC GHz Image Reject Mixer. Description. Features. Applications. Absolute Maximum Ratings [1]
![Data Sheet. AMMC GHz Image Reject Mixer. Description. Features. Applications. Absolute Maximum Ratings [1]](/thumbs/83/87078844.jpg "Data Sheet. AMMC GHz Image Reject Mixer. Description. Features. Applications. Absolute Maximum Ratings [1]")
AMMC-63 3 GHz Image Reject Mixer Data Sheet drain Chip Size: 13 x 14 µm Chip Size Tolerance: ±1 µm (±.4 mils) Chip Thickness: 1 ± 1 µm (4 ±.4 mils) gate Description Avago s AMMC-63 is an image reject mixer
Features. = +25 C, IF= 1 GHz, LO= +13 dbm* Parameter Min. Typ. Max. Units
Features Passive: No DC Bias Required Input IP3: +2 dbm LO/RF Isolation: 3 db Wide IF Bandwidth: DC - 8 GHz Typical Applications The is ideal for: Telecom Infrastructure Military Radio, Radar & ECM Space
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v2.514 MIXER, 2.5-7. GHz Typical
v SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA) 1-20 GHz Features Parameter Conditions Typ. Units Input Frequency Range 1-20 GHz
HMC-C88 v.6 - GHz Features to GHz Operation Typical Applications The HMC-C88 is ideal for: EW, ELINT & IFM Receivers DF Radar Systems ECM Systems Broadband Test & Measurement Power Measurement & Control
Features. Parameter Min. Typ. Max. Units
Typical Applications The is ideal for: Point-to-Point and Point-to-Multi-Point Radios Military Radar, EW & ELINT Satellite Communications Features Conversion Gain: db Image Rejection: dbc Input Third-Order
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v.511 Typical Applications Features
Features. = +25 C, IF= 1 GHz, LO= +13 dbm* Parameter Min. Typ. Max. Units
Typical Applications The is ideal for: Telecom Infrastructure Military Radio, Radar & ECM Space Systems Test Instrumentation Functional Diagram Features Wide IF Bandwidth: DC - 13 GHz Passive: No DC Bias
HMC219AMS8 / 219AMS8E. Features OBSOLETE. = +25 C, As a Function of LO Drive. LO = +13 dbm IF = 100 MHz
Typical Applications The HMC219AMS8 / HMC219AMS8E is ideal for: UNII & HiperLAN ISM Microwave Radios Functional Diagram Features Ultra Small Package: MSOP8 Conversion Loss: 8.5 db LO / RF Isolation: 25
Parameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +23
AMT-L0014 100MHz to 2500MHz High Linearity Limiter for A/D Converters Data Sheet Features Ideal protection for A/D converters with high dynamic range Flat Insertion Loss < 1.7 db from 300 to 2000MHz Frequency
GaAs MMIC Double Balanced Mixer
Page 1 The is a passive GaAs double balanced MMIC mixer suitable for both up and down-conversion applications. As with all Marki Microwave mixers, it features excellent conversion loss, isolation and spurious
OBSOLETE HMC215LP4 / 215LP4E. GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, GHz. Typical Applications. Features. Functional Diagram
v1.111 LO AMPLIFIER, 1.7-4. GHz Typical Applications The HMC215LP4 / HMC215LP4E is ideal for Wireless Infrastructure Applications: PCS / 3G Infrastructure Base Stations & Repeaters WiMAX & WiBro ISM &
GaAs MMIC Double Balanced Mixer
Page 1 The is a highly linear passive GaAs double balanced MMIC mixer suitable for both up and down-conversion applications. As with all Marki Microwave mixers, it features excellent conversion loss, isolation
Not recommended for new designs
Device Features NF = 0.7 db @ 900MHz at RF connectors of Demo board Gain = 19.0 db @ 900 MHz OIP3 = 36.0 dbm @ 1900MHz, 2450MHz Output P1 db = 21.0 dbm @ 900MHz, 22.0 dbm @2450MHz 5V/48mA, MTTF > 100 Years,
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com HMC148* Product Page Quick Links Last Content Update: 11/1/216 Comparable
The Hmc869LC5 is ideal for: Point-to-Point and Point-to-Multi-Point Radio. Parameter Min. Typ. Max. Units
Typical Applications The Hmc86LC is ideal for: Point-to-Point and Point-to-Multi-Point Radio Military Radar, EW & ELINT Satellite Communications Functional Diagram Features Electrical Specifications, T
TGA2239. Product Description. Product Features. Functional Block Diagram. Applications. Ordering Information. Part No.
Product Description Qorvo s is a Ku-band, high power MMIC amplifier fabricated on Qorvo s production.1 um GaN on SiC process. The operates from 13 1. GHz and provides a superior combination of power, gain
Features. = +25 C, As a Function of LO Drive
Typical Applications v.411 The is ideal for: Basestations, Repeaters & Access Points WiMAX, WiBro & Fixed Wireless Portables & Subscribers PLMR, Public Safety & Telematics Functional Diagram Features Passive
= +25 C, IF= 100 MHz, LO = +15 dbm*
v4.514 HMC62LC4 Typical Applications The HMC62LC4 is ideal for: Point-to-Point Point-to-Multi-Point Radio WiMAX & Fixed Wireless VSAT Functional Diagram Features General Description Electrical Specifications,
MICROLITHIC DOUBLE-BALANCED MIXER
Page 1 The is a Microlithic double balanced mixer. As with all Microlithic mixers (patent pending), it features excellent conversion loss, isolations, and spurious performance across a broad bandwidth
Data Sheet. AMMP GHz x2 Frequency Multiplier. Features. Description. Applications. Functional Block Diagram.
AMMP-61-24 GHz x2 Frequency Multiplier Data Sheet Description The AMMP-61 is an easy-to-use surface mounted packaged integrated frequency multiplier (x2) that operates from to 24 GHz output frequency.
Features. = +25 C, LO = 0 dbm, Vcc = Vcc1, 2, 3 = +5V, G_Bias = +2.5V *
Typical Applications The is Ideal for: Cellular/3G & LTE/WiMAX/4G Basestations & Repeaters GSM, CDMA & OFDM Transmitters and Receivers Features High Input IP3: +38 dbm 8 db Conversion Loss @ 0 dbm LO Optimized
OBSOLETE HMC908LC5 MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT. GaAs MMIC I/Q DOWNCONVERTER 9-12 GHz. Typical Applications. Functional Diagram
v3.1 HMC98LC Typical Applications The HMC98LC is ideal for: Point-to-Point and Point-to-Multi-Point Radio Military Radar, EW & ELINT Satellite Communications Maritime & Mobile Radio Functional Diagram
Features. = +25 C, As a Function of LO Drive & Vdd. IF = 1 GHz LO = -4 dbm & Vdd = +4V
v4.414 Typical Applications Features The is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment & Sensors Military End-Use Functional Diagram Integrated LO Amplifier: -4
Absolute Maximum Ratings Parameter Rating Unit V DD, V1, V2 6.0 V Maximum Input Power (DC to 2.5GHz, 2.5V Control) 28 dbm Operating Temperature -40 to
Features Low Frequency - 2.7GHz Operation Very Low Insertion Loss: Cell Band 0.35dB PCS Band 0.45dB High Isolation: Cell Band 29dB PCS Band 22dB Compatible With Low Voltage Logic: (V HIGH =1.8V) Excellent
Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system.
Device Features NF = 0.91 db @ 900MHz at RF connectors of Demo board Gain = 22.0 db @ 900 MHz OIP3 = 36.0 dbm @ 1900MHz, 38.0 dbm @ 2450MHz Output P1 db = 20.5 dbm @ 900/1900/2140 MHz 5V/75mA, MTTF > 100
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v4.414 Typical Applications Features
TGP2109-SM GHz 6-Bit Digital Phase Shifter. Product Description. Functional Block Diagram. Product Features. Applications. Ordering Information
TGP219-SM Product Description The Qorvo TGP219-SM is a packaged 6-bit digital phase shifter fabricated on Qorvo s high performance.15μm GaAs phemt process. It operates over 8 to 12 GHz and provides 36
Typical Performance 1
Device Features Internally matched to 50 ohms Operated at 3.0V and 5.0V 37.5 dbm Output IP3 at 0dBm/tone at 700MHz 22.5dB Gain at 700MHz 21.1dBm P1dB at 700 MHz 0.40 db NF at 700MHz on evaluation board
Data Sheet. ALM MHz 870 MHz Low Noise, High Linearity Amplifier Module with Fail-Safe Bypass Feature. Description.
ALM-11036 776 MHz 870 MHz Low Noise, High Linearity Amplifier Module with Fail-Safe Bypass Feature Data Sheet Description Avago Technologies ALM-11036 is an easy-to-use GaAs MMIC Tower Mount Amplifier
Features. = +25 C, LO = 0 dbm, Vcc = Vcc1, 2, 3 = +5V, G_Bias = +2.5V *
Typical Applications The is Ideal for: Cellular/3G & LTE/WiMAX/4G Basestations & Repeaters GSM, CDMA & OFDM Transmitters and Receivers Features High Input IP3: +38 dbm 8 db Conversion Loss @ 0 dbm LO Optimized
Data Sheet. ALM MHz 915 MHz Low Noise, High Linearity Amplifier Module with Fail-Safe Bypass Feature. Description.
ALM-11136 870 MHz 915 MHz Low Noise, High Linearity Amplifier Module with Fail-Safe Bypass Feature Data Sheet Description Avago Technologies ALM-11136 is an easy-to-use GaAs MMIC Tower Mount Amplifier
TGA GHz 30W GaN Power Amplifier
Applications Electronic Warfare Commercial and Military Radar Product Features Functional Block Diagram Frequency Range: 6-12 GHz Output Power: > 45 dbm (PIN = 23 dbm) PAE: > 25 % (PIN = 23 dbm) Large